blob: 3807d4f46ef7c610e102e113615dee8db1508fbc [file] [log] [blame]
/*
* SoC core Device Tree for the ARM Integrator platforms
*/
/include/ "skeleton.dtsi"
/ {
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
led@0c.0 {
compatible = "register-bit-led";
offset = <0x0c>;
mask = <0x01>;
label = "integrator:core_module";
linux,default-trigger = "cpu0";
default-state = "on";
};
};
ebi@12000000 {
compatible = "arm,external-bus-interface";
reg = <0x12000000 0x100>;
};
timer@13000000 {
reg = <0x13000000 0x100>;
interrupt-parent = <&pic>;
interrupts = <5>;
};
timer@13000100 {
reg = <0x13000100 0x100>;
interrupt-parent = <&pic>;
interrupts = <6>;
};
timer@13000200 {
reg = <0x13000200 0x100>;
interrupt-parent = <&pic>;
interrupts = <7>;
};
pic@14000000 {
compatible = "arm,versatile-fpga-irq";
#interrupt-cells = <1>;
interrupt-controller;
reg = <0x14000000 0x100>;
clear-mask = <0xffffffff>;
};
flash@24000000 {
compatible = "cfi-flash";
reg = <0x24000000 0x02000000>;
};
fpga {
compatible = "arm,amba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&pic>;
/*
* These PrimeCells are in the same locations and using the
* same interrupts in all Integrators, however the silicon
* version deployed is different.
*/
rtc@15000000 {
reg = <0x15000000 0x1000>;
interrupts = <8>;
};
uart@16000000 {
reg = <0x16000000 0x1000>;
interrupts = <1>;
};
uart@17000000 {
reg = <0x17000000 0x1000>;
interrupts = <2>;
};
kmi@18000000 {
reg = <0x18000000 0x1000>;
interrupts = <3>;
};
kmi@19000000 {
reg = <0x19000000 0x1000>;
interrupts = <4>;
};
syscon {
/* Debug registers mapped as syscon */
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
led@04.0 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x01>;
label = "integrator:green0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
led@04.1 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
led@04.2 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
led@04.3 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x08>;
label = "integrator:green1";
default-state = "off";
};
};
};
};