| /*************************************************************************** |
| * Copyright (c) 1999-2011, Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * Module Description: |
| * DO NOT EDIT THIS FILE DIRECTLY |
| * |
| * This module was generated magically with RDB from a source description |
| * file. You must edit the source file for changes to be made to this file. |
| * |
| * |
| * Date: Generated on Mon Jun 13 14:02:37 2011 |
| * MD5 Checksum a14f8e7f638a7ebe759043ff756befc5 |
| * |
| * Compiled with: RDB Utility combo_header.pl |
| * RDB Parser 3.0 |
| * unknown unknown |
| * Perl Interpreter 5.008008 |
| * Operating System linux |
| * |
| * Revision History: |
| * |
| * $brcm_Log: /magnum/basemodules/chp/7425/rdb/b0/bchp_ddr40_phy_control_regs_1.h $ |
| * |
| * Hydra_Software_Devel/3 6/14/11 1:15p vanessah |
| * SW7425-715: 7425 B0 RDB resync |
| * |
| ***************************************************************************/ |
| |
| #ifndef BCHP_DDR40_PHY_CONTROL_REGS_1_H__ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_H__ |
| |
| /*************************************************************************** |
| *DDR40_PHY_CONTROL_REGS_1 - DDR40 DDR40 physical interface control registers 1 |
| ***************************************************************************/ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_REVISION 0x003c6000 /* Address & Control revision register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_CLK_PM_CTRL 0x003c6004 /* PHY clock power management control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PLL_STATUS 0x003c6010 /* PHY PLL status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PLL_CONFIG 0x003c6014 /* PHY PLL configuration register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PLL_CONTROL 0x003c6018 /* PHY PLL control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PLL_DIVIDERS 0x003c601c /* PHY PLL dividers control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_AUX_CONTROL 0x003c6020 /* Aux Control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_OVRIDE_BYTE_CTL 0x003c6030 /* Address & Control coarse VDL static override control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_OVRIDE_BIT_CTL 0x003c6034 /* Address & Control fine VDL static override control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_IDLE_PAD_CONTROL 0x003c6038 /* Idle mode SSTL pad control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_ZQ_PVT_COMP_CTL 0x003c603c /* PVT Compensation control and status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_DRIVE_PAD_CTL 0x003c6040 /* SSTL pad drive characteristics control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_RD_DATA_DLY_STATUS 0x003c6044 /* PHY Auto Init rd_data_dly result register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_CALIBRATE 0x003c6048 /* PHY VDL calibration control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_CALIB_STATUS 0x003c604c /* PHY VDL calibration status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_DQ_CALIB_STATUS 0x003c6050 /* PHY DQ VDL calibration status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_WR_CHAN_CALIB_STATUS 0x003c6054 /* PHY Write Channel VDL calibration status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VDL_RD_EN_CALIB_STATUS 0x003c6058 /* PHY Read Enable VDL calibration status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VIRTUAL_VTT_CONTROL 0x003c605c /* Virtual VTT Control and Status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VIRTUAL_VTT_STATUS 0x003c6060 /* Virtual VTT Control and Status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VIRTUAL_VTT_CONNECTIONS 0x003c6064 /* Virtual VTT Connections register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VIRTUAL_VTT_OVERRIDE 0x003c6068 /* Virtual VTT Override register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_VREF_DAC_CONTROL 0x003c606c /* VREF DAC Control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_CNTRL 0x003c6070 /* PhyBist Control Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_SEED 0x003c6074 /* PhyBist Seed Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_STATUS 0x003c6078 /* PhyBist General Status Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_CTL_STATUS 0x003c607c /* PhyBist Per-Bit Control Pad Status Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_DQ_STATUS 0x003c6080 /* PhyBist Per-Bit DQ Pad Status Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_PHYBIST_MISC_STATUS 0x003c6084 /* PhyBist Per-Bit DM and CK Pad Status Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_COMMAND_REG 0x003c6090 /* DRAM Command Register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_MODE_REG0 0x003c6094 /* Mode Register 0 */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_MODE_REG1 0x003c6098 /* Mode Register 1 */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_MODE_REG2 0x003c609c /* Mode Register 2 */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_MODE_REG3 0x003c60a0 /* Mode Register 3 */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_STANDBY_CONTROL 0x003c60a4 /* Standby Control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_STRAP_CONTROL 0x003c60b0 /* Strap Control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_STRAP_CONTROL2 0x003c60b4 /* Strap Control register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_STRAP_STATUS 0x003c60b8 /* Strap Status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_STRAP_STATUS2 0x003c60bc /* Strap Status register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_DEBUG_FREEZE_ENABLE 0x003c60c0 /* Freeze-on-error enable register */ |
| #define BCHP_DDR40_PHY_CONTROL_REGS_1_DATAPATH_LOOPBACK 0x003c60c4 /* Datapth Loopback control register */ |
| |
| #endif /* #ifndef BCHP_DDR40_PHY_CONTROL_REGS_1_H__ */ |
| |
| /* End of File */ |