| /* |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #include "cx88.h" |
| |
| static unsigned int vbi_debug; |
| module_param(vbi_debug,int,0644); |
| MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); |
| |
| #define dprintk(level,fmt, arg...) if (vbi_debug >= level) \ |
| printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| int cx8800_vbi_fmt (struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx8800_dev *dev = video_drvdata(file); |
| |
| f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; |
| f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; |
| f->fmt.vbi.offset = 244; |
| |
| if (dev->core->tvnorm & V4L2_STD_525_60) { |
| /* ntsc */ |
| f->fmt.vbi.sampling_rate = 28636363; |
| f->fmt.vbi.start[0] = 10; |
| f->fmt.vbi.start[1] = 273; |
| f->fmt.vbi.count[0] = VBI_LINE_NTSC_COUNT; |
| f->fmt.vbi.count[1] = VBI_LINE_NTSC_COUNT; |
| |
| } else if (dev->core->tvnorm & V4L2_STD_625_50) { |
| /* pal */ |
| f->fmt.vbi.sampling_rate = 35468950; |
| f->fmt.vbi.start[0] = V4L2_VBI_ITU_625_F1_START + 5; |
| f->fmt.vbi.start[1] = V4L2_VBI_ITU_625_F2_START + 5; |
| f->fmt.vbi.count[0] = VBI_LINE_PAL_COUNT; |
| f->fmt.vbi.count[1] = VBI_LINE_PAL_COUNT; |
| } |
| return 0; |
| } |
| |
| static int cx8800_start_vbi_dma(struct cx8800_dev *dev, |
| struct cx88_dmaqueue *q, |
| struct cx88_buffer *buf) |
| { |
| struct cx88_core *core = dev->core; |
| |
| /* setup fifo + format */ |
| cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24], |
| VBI_LINE_LENGTH, buf->risc.dma); |
| |
| cx_write(MO_VBOS_CONTROL, ( (1 << 18) | // comb filter delay fixup |
| (1 << 15) | // enable vbi capture |
| (1 << 11) )); |
| |
| /* reset counter */ |
| cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET); |
| q->count = 0; |
| |
| /* enable irqs */ |
| cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT); |
| cx_set(MO_VID_INTMSK, 0x0f0088); |
| |
| /* enable capture */ |
| cx_set(VID_CAPTURE_CONTROL,0x18); |
| |
| /* start dma */ |
| cx_set(MO_DEV_CNTRL2, (1<<5)); |
| cx_set(MO_VID_DMACNTRL, 0x88); |
| |
| return 0; |
| } |
| |
| void cx8800_stop_vbi_dma(struct cx8800_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| |
| /* stop dma */ |
| cx_clear(MO_VID_DMACNTRL, 0x88); |
| |
| /* disable capture */ |
| cx_clear(VID_CAPTURE_CONTROL,0x18); |
| |
| /* disable irqs */ |
| cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT); |
| cx_clear(MO_VID_INTMSK, 0x0f0088); |
| } |
| |
| int cx8800_restart_vbi_queue(struct cx8800_dev *dev, |
| struct cx88_dmaqueue *q) |
| { |
| struct cx88_buffer *buf; |
| |
| if (list_empty(&q->active)) |
| return 0; |
| |
| buf = list_entry(q->active.next, struct cx88_buffer, list); |
| dprintk(2,"restart_queue [%p/%d]: restart dma\n", |
| buf, buf->vb.vb2_buf.index); |
| cx8800_start_vbi_dma(dev, q, buf); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int queue_setup(struct vb2_queue *q, const void *parg, |
| unsigned int *num_buffers, unsigned int *num_planes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct cx8800_dev *dev = q->drv_priv; |
| |
| *num_planes = 1; |
| if (dev->core->tvnorm & V4L2_STD_525_60) |
| sizes[0] = VBI_LINE_NTSC_COUNT * VBI_LINE_LENGTH * 2; |
| else |
| sizes[0] = VBI_LINE_PAL_COUNT * VBI_LINE_LENGTH * 2; |
| alloc_ctxs[0] = dev->alloc_ctx; |
| return 0; |
| } |
| |
| |
| static int buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct cx8800_dev *dev = vb->vb2_queue->drv_priv; |
| struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); |
| struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0); |
| unsigned int lines; |
| unsigned int size; |
| |
| if (dev->core->tvnorm & V4L2_STD_525_60) |
| lines = VBI_LINE_NTSC_COUNT; |
| else |
| lines = VBI_LINE_PAL_COUNT; |
| size = lines * VBI_LINE_LENGTH * 2; |
| if (vb2_plane_size(vb, 0) < size) |
| return -EINVAL; |
| vb2_set_plane_payload(vb, 0, size); |
| |
| cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl, |
| 0, VBI_LINE_LENGTH * lines, |
| VBI_LINE_LENGTH, 0, |
| lines); |
| return 0; |
| } |
| |
| static void buffer_finish(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct cx8800_dev *dev = vb->vb2_queue->drv_priv; |
| struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); |
| struct cx88_riscmem *risc = &buf->risc; |
| |
| if (risc->cpu) |
| pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma); |
| memset(risc, 0, sizeof(*risc)); |
| } |
| |
| static void buffer_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct cx8800_dev *dev = vb->vb2_queue->drv_priv; |
| struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb); |
| struct cx88_buffer *prev; |
| struct cx88_dmaqueue *q = &dev->vbiq; |
| |
| /* add jump to start */ |
| buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8); |
| buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC); |
| buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8); |
| |
| if (list_empty(&q->active)) { |
| list_add_tail(&buf->list, &q->active); |
| cx8800_start_vbi_dma(dev, q, buf); |
| dprintk(2,"[%p/%d] vbi_queue - first active\n", |
| buf, buf->vb.vb2_buf.index); |
| |
| } else { |
| buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1); |
| prev = list_entry(q->active.prev, struct cx88_buffer, list); |
| list_add_tail(&buf->list, &q->active); |
| prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); |
| dprintk(2,"[%p/%d] buffer_queue - append to active\n", |
| buf, buf->vb.vb2_buf.index); |
| } |
| } |
| |
| static int start_streaming(struct vb2_queue *q, unsigned int count) |
| { |
| struct cx8800_dev *dev = q->drv_priv; |
| struct cx88_dmaqueue *dmaq = &dev->vbiq; |
| struct cx88_buffer *buf = list_entry(dmaq->active.next, |
| struct cx88_buffer, list); |
| |
| cx8800_start_vbi_dma(dev, dmaq, buf); |
| return 0; |
| } |
| |
| static void stop_streaming(struct vb2_queue *q) |
| { |
| struct cx8800_dev *dev = q->drv_priv; |
| struct cx88_core *core = dev->core; |
| struct cx88_dmaqueue *dmaq = &dev->vbiq; |
| unsigned long flags; |
| |
| cx_clear(MO_VID_DMACNTRL, 0x11); |
| cx_clear(VID_CAPTURE_CONTROL, 0x06); |
| cx8800_stop_vbi_dma(dev); |
| spin_lock_irqsave(&dev->slock, flags); |
| while (!list_empty(&dmaq->active)) { |
| struct cx88_buffer *buf = list_entry(dmaq->active.next, |
| struct cx88_buffer, list); |
| |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| const struct vb2_ops cx8800_vbi_qops = { |
| .queue_setup = queue_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_finish = buffer_finish, |
| .buf_queue = buffer_queue, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| .start_streaming = start_streaming, |
| .stop_streaming = stop_streaming, |
| }; |