| /* |
| * FB driver for the ILI9341 LCD display controller |
| * |
| * This display uses 9-bit SPI: Data/Command bit + 8 data bits |
| * For platforms that doesn't support 9-bit, the driver is capable |
| * of emulating this using 8-bit transfer. |
| * This is done by transferring eight 9-bit words in 9 bytes. |
| * |
| * Copyright (C) 2013 Christian Vogelgsang |
| * Based on adafruit22fb.c by Noralf Tronnes |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| |
| #include "fbtft.h" |
| |
| #define DRVNAME "fb_ili9341" |
| #define WIDTH 240 |
| #define HEIGHT 320 |
| #define TXBUFLEN (4 * PAGE_SIZE) |
| #define DEFAULT_GAMMA "1F 1A 18 0A 0F 06 45 87 32 0A 07 02 07 05 00\n" \ |
| "00 25 27 05 10 09 3A 78 4D 05 18 0D 38 3A 1F" |
| |
| static int init_display(struct fbtft_par *par) |
| { |
| par->fbtftops.reset(par); |
| |
| /* startup sequence for MI0283QT-9A */ |
| write_reg(par, 0x01); /* software reset */ |
| mdelay(5); |
| write_reg(par, 0x28); /* display off */ |
| /* --------------------------------------------------------- */ |
| write_reg(par, 0xCF, 0x00, 0x83, 0x30); |
| write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81); |
| write_reg(par, 0xE8, 0x85, 0x01, 0x79); |
| write_reg(par, 0xCB, 0x39, 0X2C, 0x00, 0x34, 0x02); |
| write_reg(par, 0xF7, 0x20); |
| write_reg(par, 0xEA, 0x00, 0x00); |
| /* ------------power control-------------------------------- */ |
| write_reg(par, 0xC0, 0x26); |
| write_reg(par, 0xC1, 0x11); |
| /* ------------VCOM --------- */ |
| write_reg(par, 0xC5, 0x35, 0x3E); |
| write_reg(par, 0xC7, 0xBE); |
| /* ------------memory access control------------------------ */ |
| write_reg(par, 0x3A, 0x55); /* 16bit pixel */ |
| /* ------------frame rate----------------------------------- */ |
| write_reg(par, 0xB1, 0x00, 0x1B); |
| /* ------------Gamma---------------------------------------- */ |
| /* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */ |
| write_reg(par, 0x26, 0x01); |
| /* ------------display-------------------------------------- */ |
| write_reg(par, 0xB7, 0x07); /* entry mode set */ |
| write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00); |
| write_reg(par, 0x11); /* sleep out */ |
| mdelay(100); |
| write_reg(par, 0x29); /* display on */ |
| mdelay(20); |
| |
| return 0; |
| } |
| |
| static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) |
| { |
| /* Column address set */ |
| write_reg(par, 0x2A, |
| (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF); |
| |
| /* Row address set */ |
| write_reg(par, 0x2B, |
| (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF); |
| |
| /* Memory write */ |
| write_reg(par, 0x2C); |
| } |
| |
| #define MEM_Y (7) /* MY row address order */ |
| #define MEM_X (6) /* MX column address order */ |
| #define MEM_V (5) /* MV row / column exchange */ |
| #define MEM_L (4) /* ML vertical refresh order */ |
| #define MEM_H (2) /* MH horizontal refresh order */ |
| #define MEM_BGR (3) /* RGB-BGR Order */ |
| static int set_var(struct fbtft_par *par) |
| { |
| switch (par->info->var.rotate) { |
| case 0: |
| write_reg(par, 0x36, (1 << MEM_X) | (par->bgr << MEM_BGR)); |
| break; |
| case 270: |
| write_reg(par, 0x36, |
| (1 << MEM_V) | (1 << MEM_L) | (par->bgr << MEM_BGR)); |
| break; |
| case 180: |
| write_reg(par, 0x36, (1 << MEM_Y) | (par->bgr << MEM_BGR)); |
| break; |
| case 90: |
| write_reg(par, 0x36, (1 << MEM_Y) | (1 << MEM_X) | |
| (1 << MEM_V) | (par->bgr << MEM_BGR)); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| Gamma string format: |
| Positive: Par1 Par2 [...] Par15 |
| Negative: Par1 Par2 [...] Par15 |
| */ |
| #define CURVE(num, idx) curves[num * par->gamma.num_values + idx] |
| static int set_gamma(struct fbtft_par *par, unsigned long *curves) |
| { |
| int i; |
| |
| for (i = 0; i < par->gamma.num_curves; i++) |
| write_reg(par, 0xE0 + i, |
| CURVE(i, 0), CURVE(i, 1), CURVE(i, 2), |
| CURVE(i, 3), CURVE(i, 4), CURVE(i, 5), |
| CURVE(i, 6), CURVE(i, 7), CURVE(i, 8), |
| CURVE(i, 9), CURVE(i, 10), CURVE(i, 11), |
| CURVE(i, 12), CURVE(i, 13), CURVE(i, 14)); |
| |
| return 0; |
| } |
| #undef CURVE |
| |
| static struct fbtft_display display = { |
| .regwidth = 8, |
| .width = WIDTH, |
| .height = HEIGHT, |
| .txbuflen = TXBUFLEN, |
| .gamma_num = 2, |
| .gamma_len = 15, |
| .gamma = DEFAULT_GAMMA, |
| .fbtftops = { |
| .init_display = init_display, |
| .set_addr_win = set_addr_win, |
| .set_var = set_var, |
| .set_gamma = set_gamma, |
| }, |
| }; |
| |
| FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9341", &display); |
| |
| MODULE_ALIAS("spi:" DRVNAME); |
| MODULE_ALIAS("platform:" DRVNAME); |
| MODULE_ALIAS("spi:ili9341"); |
| MODULE_ALIAS("platform:ili9341"); |
| |
| MODULE_DESCRIPTION("FB driver for the ILI9341 LCD display controller"); |
| MODULE_AUTHOR("Christian Vogelgsang"); |
| MODULE_LICENSE("GPL"); |