| /* |
| * Kernel CAPI interface for the Gigaset driver |
| * |
| * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/ratelimit.h> |
| #include <linux/isdn/capilli.h> |
| #include <linux/isdn/capicmd.h> |
| #include <linux/isdn/capiutil.h> |
| #include <linux/export.h> |
| |
| /* missing from kernelcapi.h */ |
| #define CapiNcpiNotSupportedByProtocol 0x0001 |
| #define CapiFlagsNotSupportedByProtocol 0x0002 |
| #define CapiAlertAlreadySent 0x0003 |
| #define CapiFacilitySpecificFunctionNotSupported 0x3011 |
| |
| /* missing from capicmd.h */ |
| #define CAPI_CONNECT_IND_BASELEN (CAPI_MSG_BASELEN + 4 + 2 + 8 * 1) |
| #define CAPI_CONNECT_ACTIVE_IND_BASELEN (CAPI_MSG_BASELEN + 4 + 3 * 1) |
| #define CAPI_CONNECT_B3_IND_BASELEN (CAPI_MSG_BASELEN + 4 + 1) |
| #define CAPI_CONNECT_B3_ACTIVE_IND_BASELEN (CAPI_MSG_BASELEN + 4 + 1) |
| #define CAPI_DATA_B3_REQ_LEN64 (CAPI_MSG_BASELEN + 4 + 4 + 2 + 2 + 2 + 8) |
| #define CAPI_DATA_B3_CONF_LEN (CAPI_MSG_BASELEN + 4 + 2 + 2) |
| #define CAPI_DISCONNECT_IND_LEN (CAPI_MSG_BASELEN + 4 + 2) |
| #define CAPI_DISCONNECT_B3_IND_BASELEN (CAPI_MSG_BASELEN + 4 + 2 + 1) |
| #define CAPI_FACILITY_CONF_BASELEN (CAPI_MSG_BASELEN + 4 + 2 + 2 + 1) |
| /* most _CONF messages contain only Controller/PLCI/NCCI and Info parameters */ |
| #define CAPI_STDCONF_LEN (CAPI_MSG_BASELEN + 4 + 2) |
| |
| #define CAPI_FACILITY_HANDSET 0x0000 |
| #define CAPI_FACILITY_DTMF 0x0001 |
| #define CAPI_FACILITY_V42BIS 0x0002 |
| #define CAPI_FACILITY_SUPPSVC 0x0003 |
| #define CAPI_FACILITY_WAKEUP 0x0004 |
| #define CAPI_FACILITY_LI 0x0005 |
| |
| #define CAPI_SUPPSVC_GETSUPPORTED 0x0000 |
| #define CAPI_SUPPSVC_LISTEN 0x0001 |
| |
| /* missing from capiutil.h */ |
| #define CAPIMSG_PLCI_PART(m) CAPIMSG_U8(m, 9) |
| #define CAPIMSG_NCCI_PART(m) CAPIMSG_U16(m, 10) |
| #define CAPIMSG_HANDLE_REQ(m) CAPIMSG_U16(m, 18) /* DATA_B3_REQ/_IND only! */ |
| #define CAPIMSG_FLAGS(m) CAPIMSG_U16(m, 20) |
| #define CAPIMSG_SETCONTROLLER(m, contr) capimsg_setu8(m, 8, contr) |
| #define CAPIMSG_SETPLCI_PART(m, plci) capimsg_setu8(m, 9, plci) |
| #define CAPIMSG_SETNCCI_PART(m, ncci) capimsg_setu16(m, 10, ncci) |
| #define CAPIMSG_SETFLAGS(m, flags) capimsg_setu16(m, 20, flags) |
| |
| /* parameters with differing location in DATA_B3_CONF/_RESP: */ |
| #define CAPIMSG_SETHANDLE_CONF(m, handle) capimsg_setu16(m, 12, handle) |
| #define CAPIMSG_SETINFO_CONF(m, info) capimsg_setu16(m, 14, info) |
| |
| /* Flags (DATA_B3_REQ/_IND) */ |
| #define CAPI_FLAGS_DELIVERY_CONFIRMATION 0x04 |
| #define CAPI_FLAGS_RESERVED (~0x1f) |
| |
| /* buffer sizes */ |
| #define MAX_BC_OCTETS 11 |
| #define MAX_HLC_OCTETS 3 |
| #define MAX_NUMBER_DIGITS 20 |
| #define MAX_FMT_IE_LEN 20 |
| |
| /* values for bcs->apconnstate */ |
| #define APCONN_NONE 0 /* inactive/listening */ |
| #define APCONN_SETUP 1 /* connecting */ |
| #define APCONN_ACTIVE 2 /* B channel up */ |
| |
| /* registered application data structure */ |
| struct gigaset_capi_appl { |
| struct list_head ctrlist; |
| struct gigaset_capi_appl *bcnext; |
| u16 id; |
| struct capi_register_params rp; |
| u16 nextMessageNumber; |
| u32 listenInfoMask; |
| u32 listenCIPmask; |
| }; |
| |
| /* CAPI specific controller data structure */ |
| struct gigaset_capi_ctr { |
| struct capi_ctr ctr; |
| struct list_head appls; |
| struct sk_buff_head sendqueue; |
| atomic_t sendqlen; |
| /* two _cmsg structures possibly used concurrently: */ |
| _cmsg hcmsg; /* for message composition triggered from hardware */ |
| _cmsg acmsg; /* for dissection of messages sent from application */ |
| u8 bc_buf[MAX_BC_OCTETS + 1]; |
| u8 hlc_buf[MAX_HLC_OCTETS + 1]; |
| u8 cgpty_buf[MAX_NUMBER_DIGITS + 3]; |
| u8 cdpty_buf[MAX_NUMBER_DIGITS + 2]; |
| }; |
| |
| /* CIP Value table (from CAPI 2.0 standard, ch. 6.1) */ |
| static struct { |
| u8 *bc; |
| u8 *hlc; |
| } cip2bchlc[] = { |
| [1] = { "8090A3", NULL }, /* Speech (A-law) */ |
| [2] = { "8890", NULL }, /* Unrestricted digital information */ |
| [3] = { "8990", NULL }, /* Restricted digital information */ |
| [4] = { "9090A3", NULL }, /* 3,1 kHz audio (A-law) */ |
| [5] = { "9190", NULL }, /* 7 kHz audio */ |
| [6] = { "9890", NULL }, /* Video */ |
| [7] = { "88C0C6E6", NULL }, /* Packet mode */ |
| [8] = { "8890218F", NULL }, /* 56 kbit/s rate adaptation */ |
| [9] = { "9190A5", NULL }, /* Unrestricted digital information |
| * with tones/announcements */ |
| [16] = { "8090A3", "9181" }, /* Telephony */ |
| [17] = { "9090A3", "9184" }, /* Group 2/3 facsimile */ |
| [18] = { "8890", "91A1" }, /* Group 4 facsimile Class 1 */ |
| [19] = { "8890", "91A4" }, /* Teletex service basic and mixed mode |
| * and Group 4 facsimile service |
| * Classes II and III */ |
| [20] = { "8890", "91A8" }, /* Teletex service basic and |
| * processable mode */ |
| [21] = { "8890", "91B1" }, /* Teletex service basic mode */ |
| [22] = { "8890", "91B2" }, /* International interworking for |
| * Videotex */ |
| [23] = { "8890", "91B5" }, /* Telex */ |
| [24] = { "8890", "91B8" }, /* Message Handling Systems |
| * in accordance with X.400 */ |
| [25] = { "8890", "91C1" }, /* OSI application |
| * in accordance with X.200 */ |
| [26] = { "9190A5", "9181" }, /* 7 kHz telephony */ |
| [27] = { "9190A5", "916001" }, /* Video telephony, first connection */ |
| [28] = { "8890", "916002" }, /* Video telephony, second connection */ |
| }; |
| |
| /* |
| * helper functions |
| * ================ |
| */ |
| |
| /* |
| * emit unsupported parameter warning |
| */ |
| static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param, |
| char *msgname, char *paramname) |
| { |
| if (param && *param) |
| dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n", |
| msgname, paramname); |
| } |
| |
| /* |
| * convert an IE from Gigaset hex string to ETSI binary representation |
| * including length byte |
| * return value: result length, -1 on error |
| */ |
| static int encode_ie(char *in, u8 *out, int maxlen) |
| { |
| int l = 0; |
| while (*in) { |
| if (!isxdigit(in[0]) || !isxdigit(in[1]) || l >= maxlen) |
| return -1; |
| out[++l] = (hex_to_bin(in[0]) << 4) + hex_to_bin(in[1]); |
| in += 2; |
| } |
| out[0] = l; |
| return l; |
| } |
| |
| /* |
| * convert an IE from ETSI binary representation including length byte |
| * to Gigaset hex string |
| */ |
| static void decode_ie(u8 *in, char *out) |
| { |
| int i = *in; |
| while (i-- > 0) { |
| /* ToDo: conversion to upper case necessary? */ |
| *out++ = toupper(hex_asc_hi(*++in)); |
| *out++ = toupper(hex_asc_lo(*in)); |
| } |
| } |
| |
| /* |
| * retrieve application data structure for an application ID |
| */ |
| static inline struct gigaset_capi_appl * |
| get_appl(struct gigaset_capi_ctr *iif, u16 appl) |
| { |
| struct gigaset_capi_appl *ap; |
| |
| list_for_each_entry(ap, &iif->appls, ctrlist) |
| if (ap->id == appl) |
| return ap; |
| return NULL; |
| } |
| |
| /* |
| * dump CAPI message to kernel messages for debugging |
| */ |
| static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p) |
| { |
| #ifdef CONFIG_GIGASET_DEBUG |
| /* dump at most 20 messages in 20 secs */ |
| static DEFINE_RATELIMIT_STATE(msg_dump_ratelimit, 20 * HZ, 20); |
| _cdebbuf *cdb; |
| |
| if (!(gigaset_debuglevel & level)) |
| return; |
| if (!___ratelimit(&msg_dump_ratelimit, tag)) |
| return; |
| |
| cdb = capi_cmsg2str(p); |
| if (cdb) { |
| gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, cdb->buf); |
| cdebbuf_free(cdb); |
| } else { |
| gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, |
| capi_cmd2str(p->Command, p->Subcommand)); |
| } |
| #endif |
| } |
| |
| static inline void dump_rawmsg(enum debuglevel level, const char *tag, |
| unsigned char *data) |
| { |
| #ifdef CONFIG_GIGASET_DEBUG |
| char *dbgline; |
| int i, l; |
| |
| if (!(gigaset_debuglevel & level)) |
| return; |
| |
| l = CAPIMSG_LEN(data); |
| if (l < 12) { |
| gig_dbg(level, "%s: ??? LEN=%04d", tag, l); |
| return; |
| } |
| gig_dbg(level, "%s: 0x%02x:0x%02x: ID=%03d #0x%04x LEN=%04d NCCI=0x%x", |
| tag, CAPIMSG_COMMAND(data), CAPIMSG_SUBCOMMAND(data), |
| CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l, |
| CAPIMSG_CONTROL(data)); |
| l -= 12; |
| if (l <= 0) |
| return; |
| if (l > 64) |
| l = 64; /* arbitrary limit */ |
| dbgline = kmalloc(3 * l, GFP_ATOMIC); |
| if (!dbgline) |
| return; |
| for (i = 0; i < l; i++) { |
| dbgline[3 * i] = hex_asc_hi(data[12 + i]); |
| dbgline[3 * i + 1] = hex_asc_lo(data[12 + i]); |
| dbgline[3 * i + 2] = ' '; |
| } |
| dbgline[3 * l - 1] = '\0'; |
| gig_dbg(level, " %s", dbgline); |
| kfree(dbgline); |
| if (CAPIMSG_COMMAND(data) == CAPI_DATA_B3 && |
| (CAPIMSG_SUBCOMMAND(data) == CAPI_REQ || |
| CAPIMSG_SUBCOMMAND(data) == CAPI_IND)) { |
| l = CAPIMSG_DATALEN(data); |
| gig_dbg(level, " DataLength=%d", l); |
| if (l <= 0 || !(gigaset_debuglevel & DEBUG_LLDATA)) |
| return; |
| if (l > 64) |
| l = 64; /* arbitrary limit */ |
| dbgline = kmalloc(3 * l, GFP_ATOMIC); |
| if (!dbgline) |
| return; |
| data += CAPIMSG_LEN(data); |
| for (i = 0; i < l; i++) { |
| dbgline[3 * i] = hex_asc_hi(data[i]); |
| dbgline[3 * i + 1] = hex_asc_lo(data[i]); |
| dbgline[3 * i + 2] = ' '; |
| } |
| dbgline[3 * l - 1] = '\0'; |
| gig_dbg(level, " %s", dbgline); |
| kfree(dbgline); |
| } |
| #endif |
| } |
| |
| /* |
| * format CAPI IE as string |
| */ |
| |
| #ifdef CONFIG_GIGASET_DEBUG |
| static const char *format_ie(const char *ie) |
| { |
| static char result[3 * MAX_FMT_IE_LEN]; |
| int len, count; |
| char *pout = result; |
| |
| if (!ie) |
| return "NULL"; |
| |
| count = len = ie[0]; |
| if (count > MAX_FMT_IE_LEN) |
| count = MAX_FMT_IE_LEN - 1; |
| while (count--) { |
| *pout++ = hex_asc_hi(*++ie); |
| *pout++ = hex_asc_lo(*ie); |
| *pout++ = ' '; |
| } |
| if (len > MAX_FMT_IE_LEN) { |
| *pout++ = '.'; |
| *pout++ = '.'; |
| *pout++ = '.'; |
| } |
| *--pout = 0; |
| return result; |
| } |
| #endif |
| |
| /* |
| * emit DATA_B3_CONF message |
| */ |
| static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr, |
| u16 appl, u16 msgid, int channel, |
| u16 handle, u16 info) |
| { |
| struct sk_buff *cskb; |
| u8 *msg; |
| |
| cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC); |
| if (!cskb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| /* frequent message, avoid _cmsg overhead */ |
| msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN); |
| CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN); |
| CAPIMSG_SETAPPID(msg, appl); |
| CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3); |
| CAPIMSG_SETSUBCOMMAND(msg, CAPI_CONF); |
| CAPIMSG_SETMSGID(msg, msgid); |
| CAPIMSG_SETCONTROLLER(msg, ctr->cnr); |
| CAPIMSG_SETPLCI_PART(msg, channel); |
| CAPIMSG_SETNCCI_PART(msg, 1); |
| CAPIMSG_SETHANDLE_CONF(msg, handle); |
| CAPIMSG_SETINFO_CONF(msg, info); |
| |
| /* emit message */ |
| dump_rawmsg(DEBUG_MCMD, __func__, msg); |
| capi_ctr_handle_message(ctr, appl, cskb); |
| } |
| |
| |
| /* |
| * driver interface functions |
| * ========================== |
| */ |
| |
| /** |
| * gigaset_skb_sent() - acknowledge transmission of outgoing skb |
| * @bcs: B channel descriptor structure. |
| * @skb: sent data. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when the data in a |
| * skb has been successfully sent, for signalling completion to the LL. |
| */ |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct gigaset_capi_appl *ap = bcs->ap; |
| unsigned char *req = skb_mac_header(dskb); |
| u16 flags; |
| |
| /* update statistics */ |
| ++bcs->trans_up; |
| |
| if (!ap) { |
| gig_dbg(DEBUG_MCMD, "%s: application gone", __func__); |
| return; |
| } |
| |
| /* don't send further B3 messages if disconnected */ |
| if (bcs->apconnstate < APCONN_ACTIVE) { |
| gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__); |
| return; |
| } |
| |
| /* |
| * send DATA_B3_CONF if "delivery confirmation" bit was set in request; |
| * otherwise it has already been sent by do_data_b3_req() |
| */ |
| flags = CAPIMSG_FLAGS(req); |
| if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION) |
| send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req), |
| bcs->channel + 1, CAPIMSG_HANDLE_REQ(req), |
| (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ? |
| CapiFlagsNotSupportedByProtocol : |
| CAPI_NOERROR); |
| } |
| EXPORT_SYMBOL_GPL(gigaset_skb_sent); |
| |
| /** |
| * gigaset_skb_rcvd() - pass received skb to LL |
| * @bcs: B channel descriptor structure. |
| * @skb: received data. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when user data has |
| * been successfully received, for passing to the LL. |
| * Warning: skb must not be accessed anymore! |
| */ |
| void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct gigaset_capi_appl *ap = bcs->ap; |
| int len = skb->len; |
| |
| /* update statistics */ |
| bcs->trans_down++; |
| |
| if (!ap) { |
| gig_dbg(DEBUG_MCMD, "%s: application gone", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| /* don't send further B3 messages if disconnected */ |
| if (bcs->apconnstate < APCONN_ACTIVE) { |
| gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| /* |
| * prepend DATA_B3_IND message to payload |
| * Parameters: NCCI = 1, all others 0/unused |
| * frequent message, avoid _cmsg overhead |
| */ |
| skb_push(skb, CAPI_DATA_B3_REQ_LEN); |
| CAPIMSG_SETLEN(skb->data, CAPI_DATA_B3_REQ_LEN); |
| CAPIMSG_SETAPPID(skb->data, ap->id); |
| CAPIMSG_SETCOMMAND(skb->data, CAPI_DATA_B3); |
| CAPIMSG_SETSUBCOMMAND(skb->data, CAPI_IND); |
| CAPIMSG_SETMSGID(skb->data, ap->nextMessageNumber++); |
| CAPIMSG_SETCONTROLLER(skb->data, iif->ctr.cnr); |
| CAPIMSG_SETPLCI_PART(skb->data, bcs->channel + 1); |
| CAPIMSG_SETNCCI_PART(skb->data, 1); |
| /* Data parameter not used */ |
| CAPIMSG_SETDATALEN(skb->data, len); |
| /* Data handle parameter not used */ |
| CAPIMSG_SETFLAGS(skb->data, 0); |
| /* Data64 parameter not present */ |
| |
| /* emit message */ |
| dump_rawmsg(DEBUG_MCMD, __func__, skb->data); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| EXPORT_SYMBOL_GPL(gigaset_skb_rcvd); |
| |
| /** |
| * gigaset_isdn_rcv_err() - signal receive error |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when a receive error |
| * has occurred, for signalling to the LL. |
| */ |
| void gigaset_isdn_rcv_err(struct bc_state *bcs) |
| { |
| /* if currently ignoring packets, just count down */ |
| if (bcs->ignore) { |
| bcs->ignore--; |
| return; |
| } |
| |
| /* update statistics */ |
| bcs->corrupted++; |
| |
| /* ToDo: signal error -> LL */ |
| } |
| EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err); |
| |
| /** |
| * gigaset_isdn_icall() - signal incoming call |
| * @at_state: connection state structure. |
| * |
| * Called by main module at tasklet level to notify the LL that an incoming |
| * call has been received. @at_state contains the parameters of the call. |
| * |
| * Return value: call disposition (ICALL_*) |
| */ |
| int gigaset_isdn_icall(struct at_state_t *at_state) |
| { |
| struct cardstate *cs = at_state->cs; |
| struct bc_state *bcs = at_state->bcs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct gigaset_capi_appl *ap; |
| u32 actCIPmask; |
| struct sk_buff *skb; |
| unsigned int msgsize; |
| unsigned long flags; |
| int i; |
| |
| /* |
| * ToDo: signal calls without a free B channel, too |
| * (requires a u8 handle for the at_state structure that can |
| * be stored in the PLCI and used in the CONNECT_RESP message |
| * handler to retrieve it) |
| */ |
| if (!bcs) |
| return ICALL_IGNORE; |
| |
| /* prepare CONNECT_IND message, using B channel number as PLCI */ |
| capi_cmsg_header(&iif->hcmsg, 0, CAPI_CONNECT, CAPI_IND, 0, |
| iif->ctr.cnr | ((bcs->channel + 1) << 8)); |
| |
| /* minimum size, all structs empty */ |
| msgsize = CAPI_CONNECT_IND_BASELEN; |
| |
| /* Bearer Capability (mandatory) */ |
| if (at_state->str_var[STR_ZBC]) { |
| /* pass on BC from Gigaset */ |
| if (encode_ie(at_state->str_var[STR_ZBC], iif->bc_buf, |
| MAX_BC_OCTETS) < 0) { |
| dev_warn(cs->dev, "RING ignored - bad BC %s\n", |
| at_state->str_var[STR_ZBC]); |
| return ICALL_IGNORE; |
| } |
| |
| /* look up corresponding CIP value */ |
| iif->hcmsg.CIPValue = 0; /* default if nothing found */ |
| for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++) |
| if (cip2bchlc[i].bc != NULL && |
| cip2bchlc[i].hlc == NULL && |
| !strcmp(cip2bchlc[i].bc, |
| at_state->str_var[STR_ZBC])) { |
| iif->hcmsg.CIPValue = i; |
| break; |
| } |
| } else { |
| /* no BC (internal call): assume CIP 1 (speech, A-law) */ |
| iif->hcmsg.CIPValue = 1; |
| encode_ie(cip2bchlc[1].bc, iif->bc_buf, MAX_BC_OCTETS); |
| } |
| iif->hcmsg.BC = iif->bc_buf; |
| msgsize += iif->hcmsg.BC[0]; |
| |
| /* High Layer Compatibility (optional) */ |
| if (at_state->str_var[STR_ZHLC]) { |
| /* pass on HLC from Gigaset */ |
| if (encode_ie(at_state->str_var[STR_ZHLC], iif->hlc_buf, |
| MAX_HLC_OCTETS) < 0) { |
| dev_warn(cs->dev, "RING ignored - bad HLC %s\n", |
| at_state->str_var[STR_ZHLC]); |
| return ICALL_IGNORE; |
| } |
| iif->hcmsg.HLC = iif->hlc_buf; |
| msgsize += iif->hcmsg.HLC[0]; |
| |
| /* look up corresponding CIP value */ |
| /* keep BC based CIP value if none found */ |
| if (at_state->str_var[STR_ZBC]) |
| for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++) |
| if (cip2bchlc[i].hlc != NULL && |
| !strcmp(cip2bchlc[i].hlc, |
| at_state->str_var[STR_ZHLC]) && |
| !strcmp(cip2bchlc[i].bc, |
| at_state->str_var[STR_ZBC])) { |
| iif->hcmsg.CIPValue = i; |
| break; |
| } |
| } |
| |
| /* Called Party Number (optional) */ |
| if (at_state->str_var[STR_ZCPN]) { |
| i = strlen(at_state->str_var[STR_ZCPN]); |
| if (i > MAX_NUMBER_DIGITS) { |
| dev_warn(cs->dev, "RING ignored - bad number %s\n", |
| at_state->str_var[STR_ZBC]); |
| return ICALL_IGNORE; |
| } |
| iif->cdpty_buf[0] = i + 1; |
| iif->cdpty_buf[1] = 0x80; /* type / numbering plan unknown */ |
| memcpy(iif->cdpty_buf + 2, at_state->str_var[STR_ZCPN], i); |
| iif->hcmsg.CalledPartyNumber = iif->cdpty_buf; |
| msgsize += iif->hcmsg.CalledPartyNumber[0]; |
| } |
| |
| /* Calling Party Number (optional) */ |
| if (at_state->str_var[STR_NMBR]) { |
| i = strlen(at_state->str_var[STR_NMBR]); |
| if (i > MAX_NUMBER_DIGITS) { |
| dev_warn(cs->dev, "RING ignored - bad number %s\n", |
| at_state->str_var[STR_ZBC]); |
| return ICALL_IGNORE; |
| } |
| iif->cgpty_buf[0] = i + 2; |
| iif->cgpty_buf[1] = 0x00; /* type / numbering plan unknown */ |
| iif->cgpty_buf[2] = 0x80; /* pres. allowed, not screened */ |
| memcpy(iif->cgpty_buf + 3, at_state->str_var[STR_NMBR], i); |
| iif->hcmsg.CallingPartyNumber = iif->cgpty_buf; |
| msgsize += iif->hcmsg.CallingPartyNumber[0]; |
| } |
| |
| /* remaining parameters (not supported, always left NULL): |
| * - CalledPartySubaddress |
| * - CallingPartySubaddress |
| * - AdditionalInfo |
| * - BChannelinformation |
| * - Keypadfacility |
| * - Useruserdata |
| * - Facilitydataarray |
| */ |
| |
| gig_dbg(DEBUG_CMD, "icall: PLCI %x CIP %d BC %s", |
| iif->hcmsg.adr.adrPLCI, iif->hcmsg.CIPValue, |
| format_ie(iif->hcmsg.BC)); |
| gig_dbg(DEBUG_CMD, "icall: HLC %s", |
| format_ie(iif->hcmsg.HLC)); |
| gig_dbg(DEBUG_CMD, "icall: CgPty %s", |
| format_ie(iif->hcmsg.CallingPartyNumber)); |
| gig_dbg(DEBUG_CMD, "icall: CdPty %s", |
| format_ie(iif->hcmsg.CalledPartyNumber)); |
| |
| /* scan application list for matching listeners */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) { |
| dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n", |
| __func__, bcs->ap, bcs->apconnstate); |
| bcs->ap = NULL; |
| bcs->apconnstate = APCONN_NONE; |
| } |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| actCIPmask = 1 | (1 << iif->hcmsg.CIPValue); |
| list_for_each_entry(ap, &iif->appls, ctrlist) |
| if (actCIPmask & ap->listenCIPmask) { |
| /* build CONNECT_IND message for this application */ |
| iif->hcmsg.ApplId = ap->id; |
| iif->hcmsg.Messagenumber = ap->nextMessageNumber++; |
| |
| skb = alloc_skb(msgsize, GFP_ATOMIC); |
| if (!skb) { |
| dev_err(cs->dev, "%s: out of memory\n", |
| __func__); |
| break; |
| } |
| if (capi_cmsg2message(&iif->hcmsg, |
| __skb_put(skb, msgsize))) { |
| dev_err(cs->dev, "%s: message parser failure\n", |
| __func__); |
| dev_kfree_skb_any(skb); |
| break; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); |
| |
| /* add to listeners on this B channel, update state */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| ap->bcnext = bcs->ap; |
| bcs->ap = ap; |
| bcs->chstate |= CHS_NOTIFY_LL; |
| bcs->apconnstate = APCONN_SETUP; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| /* emit message */ |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /* |
| * Return "accept" if any listeners. |
| * Gigaset will send ALERTING. |
| * There doesn't seem to be a way to avoid this. |
| */ |
| return bcs->ap ? ICALL_ACCEPT : ICALL_IGNORE; |
| } |
| |
| /* |
| * send a DISCONNECT_IND message to an application |
| * does not sleep, clobbers the controller's hcmsg structure |
| */ |
| static void send_disconnect_ind(struct bc_state *bcs, |
| struct gigaset_capi_appl *ap, u16 reason) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct sk_buff *skb; |
| |
| if (bcs->apconnstate == APCONN_NONE) |
| return; |
| |
| capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND, |
| ap->nextMessageNumber++, |
| iif->ctr.cnr | ((bcs->channel + 1) << 8)); |
| iif->hcmsg.Reason = reason; |
| skb = alloc_skb(CAPI_DISCONNECT_IND_LEN, GFP_ATOMIC); |
| if (!skb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| if (capi_cmsg2message(&iif->hcmsg, |
| __skb_put(skb, CAPI_DISCONNECT_IND_LEN))) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /* |
| * send a DISCONNECT_B3_IND message to an application |
| * Parameters: NCCI = 1, NCPI empty, Reason_B3 = 0 |
| * does not sleep, clobbers the controller's hcmsg structure |
| */ |
| static void send_disconnect_b3_ind(struct bc_state *bcs, |
| struct gigaset_capi_appl *ap) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct sk_buff *skb; |
| |
| /* nothing to do if no logical connection active */ |
| if (bcs->apconnstate < APCONN_ACTIVE) |
| return; |
| bcs->apconnstate = APCONN_SETUP; |
| |
| capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, |
| ap->nextMessageNumber++, |
| iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16)); |
| skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_ATOMIC); |
| if (!skb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| if (capi_cmsg2message(&iif->hcmsg, |
| __skb_put(skb, CAPI_DISCONNECT_B3_IND_BASELEN))) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /** |
| * gigaset_isdn_connD() - signal D channel connect |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module at tasklet level to notify the LL that the D channel |
| * connection has been established. |
| */ |
| void gigaset_isdn_connD(struct bc_state *bcs) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct gigaset_capi_appl *ap; |
| struct sk_buff *skb; |
| unsigned int msgsize; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bcs->aplock, flags); |
| ap = bcs->ap; |
| if (!ap) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| gig_dbg(DEBUG_CMD, "%s: application gone", __func__); |
| return; |
| } |
| if (bcs->apconnstate == APCONN_NONE) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| dev_warn(cs->dev, "%s: application %u not connected\n", |
| __func__, ap->id); |
| return; |
| } |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| while (ap->bcnext) { |
| /* this should never happen */ |
| dev_warn(cs->dev, "%s: dropping extra application %u\n", |
| __func__, ap->bcnext->id); |
| send_disconnect_ind(bcs, ap->bcnext, |
| CapiCallGivenToOtherApplication); |
| ap->bcnext = ap->bcnext->bcnext; |
| } |
| |
| /* prepare CONNECT_ACTIVE_IND message |
| * Note: LLC not supported by device |
| */ |
| capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_CONNECT_ACTIVE, CAPI_IND, |
| ap->nextMessageNumber++, |
| iif->ctr.cnr | ((bcs->channel + 1) << 8)); |
| |
| /* minimum size, all structs empty */ |
| msgsize = CAPI_CONNECT_ACTIVE_IND_BASELEN; |
| |
| /* ToDo: set parameter: Connected number |
| * (requires ev-layer state machine extension to collect |
| * ZCON device reply) |
| */ |
| |
| /* build and emit CONNECT_ACTIVE_IND message */ |
| skb = alloc_skb(msgsize, GFP_ATOMIC); |
| if (!skb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| if (capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize))) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /** |
| * gigaset_isdn_hupD() - signal D channel hangup |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module at tasklet level to notify the LL that the D channel |
| * connection has been shut down. |
| */ |
| void gigaset_isdn_hupD(struct bc_state *bcs) |
| { |
| struct gigaset_capi_appl *ap; |
| unsigned long flags; |
| |
| /* |
| * ToDo: pass on reason code reported by device |
| * (requires ev-layer state machine extension to collect |
| * ZCAU device reply) |
| */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| while (bcs->ap != NULL) { |
| ap = bcs->ap; |
| bcs->ap = ap->bcnext; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| send_disconnect_b3_ind(bcs, ap); |
| send_disconnect_ind(bcs, ap, 0); |
| spin_lock_irqsave(&bcs->aplock, flags); |
| } |
| bcs->apconnstate = APCONN_NONE; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| } |
| |
| /** |
| * gigaset_isdn_connB() - signal B channel connect |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module at tasklet level to notify the LL that the B channel |
| * connection has been established. |
| */ |
| void gigaset_isdn_connB(struct bc_state *bcs) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_ctr *iif = cs->iif; |
| struct gigaset_capi_appl *ap; |
| struct sk_buff *skb; |
| unsigned long flags; |
| unsigned int msgsize; |
| u8 command; |
| |
| spin_lock_irqsave(&bcs->aplock, flags); |
| ap = bcs->ap; |
| if (!ap) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| gig_dbg(DEBUG_CMD, "%s: application gone", __func__); |
| return; |
| } |
| if (!bcs->apconnstate) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| dev_warn(cs->dev, "%s: application %u not connected\n", |
| __func__, ap->id); |
| return; |
| } |
| |
| /* |
| * emit CONNECT_B3_ACTIVE_IND if we already got CONNECT_B3_REQ; |
| * otherwise we have to emit CONNECT_B3_IND first, and follow up with |
| * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP |
| * Parameters in both cases always: NCCI = 1, NCPI empty |
| */ |
| if (bcs->apconnstate >= APCONN_ACTIVE) { |
| command = CAPI_CONNECT_B3_ACTIVE; |
| msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; |
| } else { |
| command = CAPI_CONNECT_B3; |
| msgsize = CAPI_CONNECT_B3_IND_BASELEN; |
| } |
| bcs->apconnstate = APCONN_ACTIVE; |
| |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| while (ap->bcnext) { |
| /* this should never happen */ |
| dev_warn(cs->dev, "%s: dropping extra application %u\n", |
| __func__, ap->bcnext->id); |
| send_disconnect_ind(bcs, ap->bcnext, |
| CapiCallGivenToOtherApplication); |
| ap->bcnext = ap->bcnext->bcnext; |
| } |
| |
| capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND, |
| ap->nextMessageNumber++, |
| iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16)); |
| skb = alloc_skb(msgsize, GFP_ATOMIC); |
| if (!skb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| if (capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize))) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /** |
| * gigaset_isdn_hupB() - signal B channel hangup |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module to notify the LL that the B channel connection has |
| * been shut down. |
| */ |
| void gigaset_isdn_hupB(struct bc_state *bcs) |
| { |
| struct gigaset_capi_appl *ap = bcs->ap; |
| |
| /* ToDo: assure order of DISCONNECT_B3_IND and DISCONNECT_IND ? */ |
| |
| if (!ap) { |
| gig_dbg(DEBUG_CMD, "%s: application gone", __func__); |
| return; |
| } |
| |
| send_disconnect_b3_ind(bcs, ap); |
| } |
| |
| /** |
| * gigaset_isdn_start() - signal device availability |
| * @cs: device descriptor structure. |
| * |
| * Called by main module to notify the LL that the device is available for |
| * use. |
| */ |
| void gigaset_isdn_start(struct cardstate *cs) |
| { |
| struct gigaset_capi_ctr *iif = cs->iif; |
| |
| /* fill profile data: manufacturer name */ |
| strcpy(iif->ctr.manu, "Siemens"); |
| /* CAPI and device version */ |
| iif->ctr.version.majorversion = 2; /* CAPI 2.0 */ |
| iif->ctr.version.minorversion = 0; |
| /* ToDo: check/assert cs->gotfwver? */ |
| iif->ctr.version.majormanuversion = cs->fwver[0]; |
| iif->ctr.version.minormanuversion = cs->fwver[1]; |
| /* number of B channels supported */ |
| iif->ctr.profile.nbchannel = cs->channels; |
| /* global options: internal controller, supplementary services */ |
| iif->ctr.profile.goptions = 0x11; |
| /* B1 protocols: 64 kbit/s HDLC or transparent */ |
| iif->ctr.profile.support1 = 0x03; |
| /* B2 protocols: transparent only */ |
| /* ToDo: X.75 SLP ? */ |
| iif->ctr.profile.support2 = 0x02; |
| /* B3 protocols: transparent only */ |
| iif->ctr.profile.support3 = 0x01; |
| /* no serial number */ |
| strcpy(iif->ctr.serial, "0"); |
| capi_ctr_ready(&iif->ctr); |
| } |
| |
| /** |
| * gigaset_isdn_stop() - signal device unavailability |
| * @cs: device descriptor structure. |
| * |
| * Called by main module to notify the LL that the device is no longer |
| * available for use. |
| */ |
| void gigaset_isdn_stop(struct cardstate *cs) |
| { |
| struct gigaset_capi_ctr *iif = cs->iif; |
| capi_ctr_down(&iif->ctr); |
| } |
| |
| /* |
| * kernel CAPI callback methods |
| * ============================ |
| */ |
| |
| /* |
| * register CAPI application |
| */ |
| static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl, |
| capi_register_params *rp) |
| { |
| struct gigaset_capi_ctr *iif |
| = container_of(ctr, struct gigaset_capi_ctr, ctr); |
| struct cardstate *cs = ctr->driverdata; |
| struct gigaset_capi_appl *ap; |
| |
| gig_dbg(DEBUG_CMD, "%s [%u] l3cnt=%u blkcnt=%u blklen=%u", |
| __func__, appl, rp->level3cnt, rp->datablkcnt, rp->datablklen); |
| |
| list_for_each_entry(ap, &iif->appls, ctrlist) |
| if (ap->id == appl) { |
| dev_notice(cs->dev, |
| "application %u already registered\n", appl); |
| return; |
| } |
| |
| ap = kzalloc(sizeof(*ap), GFP_KERNEL); |
| if (!ap) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| ap->id = appl; |
| ap->rp = *rp; |
| |
| list_add(&ap->ctrlist, &iif->appls); |
| dev_info(cs->dev, "application %u registered\n", ap->id); |
| } |
| |
| /* |
| * remove CAPI application from channel |
| * helper function to keep indentation levels down and stay in 80 columns |
| */ |
| |
| static inline void remove_appl_from_channel(struct bc_state *bcs, |
| struct gigaset_capi_appl *ap) |
| { |
| struct cardstate *cs = bcs->cs; |
| struct gigaset_capi_appl *bcap; |
| unsigned long flags; |
| int prevconnstate; |
| |
| spin_lock_irqsave(&bcs->aplock, flags); |
| bcap = bcs->ap; |
| if (bcap == NULL) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| return; |
| } |
| |
| /* check first application on channel */ |
| if (bcap == ap) { |
| bcs->ap = ap->bcnext; |
| if (bcs->ap != NULL) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| return; |
| } |
| |
| /* none left, clear channel state */ |
| prevconnstate = bcs->apconnstate; |
| bcs->apconnstate = APCONN_NONE; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| if (prevconnstate == APCONN_ACTIVE) { |
| dev_notice(cs->dev, "%s: hanging up channel %u\n", |
| __func__, bcs->channel); |
| gigaset_add_event(cs, &bcs->at_state, |
| EV_HUP, NULL, 0, NULL); |
| gigaset_schedule_event(cs); |
| } |
| return; |
| } |
| |
| /* check remaining list */ |
| do { |
| if (bcap->bcnext == ap) { |
| bcap->bcnext = bcap->bcnext->bcnext; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| return; |
| } |
| bcap = bcap->bcnext; |
| } while (bcap != NULL); |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| } |
| |
| /* |
| * release CAPI application |
| */ |
| static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl) |
| { |
| struct gigaset_capi_ctr *iif |
| = container_of(ctr, struct gigaset_capi_ctr, ctr); |
| struct cardstate *cs = iif->ctr.driverdata; |
| struct gigaset_capi_appl *ap, *tmp; |
| unsigned ch; |
| |
| gig_dbg(DEBUG_CMD, "%s [%u]", __func__, appl); |
| |
| list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist) |
| if (ap->id == appl) { |
| /* remove from any channels */ |
| for (ch = 0; ch < cs->channels; ch++) |
| remove_appl_from_channel(&cs->bcs[ch], ap); |
| |
| /* remove from registration list */ |
| list_del(&ap->ctrlist); |
| kfree(ap); |
| dev_info(cs->dev, "application %u released\n", appl); |
| } |
| } |
| |
| /* |
| * ===================================================================== |
| * outgoing CAPI message handler |
| * ===================================================================== |
| */ |
| |
| /* |
| * helper function: emit reply message with given Info value |
| */ |
| static void send_conf(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb, |
| u16 info) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* |
| * _CONF replies always only have NCCI and Info parameters |
| * so they'll fit into the _REQ message skb |
| */ |
| capi_cmsg_answer(&iif->acmsg); |
| iif->acmsg.Info = info; |
| if (capi_cmsg2message(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| __skb_trim(skb, CAPI_STDCONF_LEN); |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /* |
| * process FACILITY_REQ message |
| */ |
| static void do_facility_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct sk_buff *cskb; |
| u8 *pparam; |
| unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN; |
| u16 function, info; |
| static u8 confparam[10]; /* max. 9 octets + length byte */ |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* |
| * Facility Request Parameter is not decoded by capi_message2cmsg() |
| * encoding depends on Facility Selector |
| */ |
| switch (cmsg->FacilitySelector) { |
| case CAPI_FACILITY_DTMF: /* ToDo */ |
| info = CapiFacilityNotSupported; |
| confparam[0] = 2; /* length */ |
| /* DTMF information: Unknown DTMF request */ |
| capimsg_setu16(confparam, 1, 2); |
| break; |
| |
| case CAPI_FACILITY_V42BIS: /* not supported */ |
| info = CapiFacilityNotSupported; |
| confparam[0] = 2; /* length */ |
| /* V.42 bis information: not available */ |
| capimsg_setu16(confparam, 1, 1); |
| break; |
| |
| case CAPI_FACILITY_SUPPSVC: |
| /* decode Function parameter */ |
| pparam = cmsg->FacilityRequestParameter; |
| if (pparam == NULL || pparam[0] < 2) { |
| dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ", |
| "Facility Request Parameter"); |
| send_conf(iif, ap, skb, CapiIllMessageParmCoding); |
| return; |
| } |
| function = CAPIMSG_U16(pparam, 1); |
| switch (function) { |
| case CAPI_SUPPSVC_GETSUPPORTED: |
| info = CapiSuccess; |
| /* Supplementary Service specific parameter */ |
| confparam[3] = 6; /* length */ |
| /* Supplementary services info: Success */ |
| capimsg_setu16(confparam, 4, CapiSuccess); |
| /* Supported Services: none */ |
| capimsg_setu32(confparam, 6, 0); |
| break; |
| case CAPI_SUPPSVC_LISTEN: |
| if (pparam[0] < 7 || pparam[3] < 4) { |
| dev_notice(cs->dev, "%s: %s missing\n", |
| "FACILITY_REQ", "Notification Mask"); |
| send_conf(iif, ap, skb, |
| CapiIllMessageParmCoding); |
| return; |
| } |
| if (CAPIMSG_U32(pparam, 4) != 0) { |
| dev_notice(cs->dev, |
| "%s: unsupported supplementary service notification mask 0x%x\n", |
| "FACILITY_REQ", CAPIMSG_U32(pparam, 4)); |
| info = CapiFacilitySpecificFunctionNotSupported; |
| confparam[3] = 2; /* length */ |
| capimsg_setu16(confparam, 4, |
| CapiSupplementaryServiceNotSupported); |
| break; |
| } |
| info = CapiSuccess; |
| confparam[3] = 2; /* length */ |
| capimsg_setu16(confparam, 4, CapiSuccess); |
| break; |
| |
| /* ToDo: add supported services */ |
| |
| default: |
| dev_notice(cs->dev, |
| "%s: unsupported supplementary service function 0x%04x\n", |
| "FACILITY_REQ", function); |
| info = CapiFacilitySpecificFunctionNotSupported; |
| /* Supplementary Service specific parameter */ |
| confparam[3] = 2; /* length */ |
| /* Supplementary services info: not supported */ |
| capimsg_setu16(confparam, 4, |
| CapiSupplementaryServiceNotSupported); |
| } |
| |
| /* Facility confirmation parameter */ |
| confparam[0] = confparam[3] + 3; /* total length */ |
| /* Function: copy from _REQ message */ |
| capimsg_setu16(confparam, 1, function); |
| /* Supplementary Service specific parameter already set above */ |
| break; |
| |
| case CAPI_FACILITY_WAKEUP: /* ToDo */ |
| info = CapiFacilityNotSupported; |
| confparam[0] = 2; /* length */ |
| /* Number of accepted awake request parameters: 0 */ |
| capimsg_setu16(confparam, 1, 0); |
| break; |
| |
| default: |
| info = CapiFacilityNotSupported; |
| confparam[0] = 0; /* empty struct */ |
| } |
| |
| /* send FACILITY_CONF with given Info and confirmation parameter */ |
| dev_kfree_skb_any(skb); |
| capi_cmsg_answer(cmsg); |
| cmsg->Info = info; |
| cmsg->FacilityConfirmationParameter = confparam; |
| msgsize += confparam[0]; /* length */ |
| cskb = alloc_skb(msgsize, GFP_ATOMIC); |
| if (!cskb) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| return; |
| } |
| if (capi_cmsg2message(cmsg, __skb_put(cskb, msgsize))) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(cskb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, cskb); |
| } |
| |
| |
| /* |
| * process LISTEN_REQ message |
| * just store the masks in the application data structure |
| */ |
| static void do_listen_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* decode message */ |
| if (capi_message2cmsg(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| |
| /* store listening parameters */ |
| ap->listenInfoMask = iif->acmsg.InfoMask; |
| ap->listenCIPmask = iif->acmsg.CIPmask; |
| send_conf(iif, ap, skb, CapiSuccess); |
| } |
| |
| /* |
| * process ALERT_REQ message |
| * nothing to do, Gigaset always alerts anyway |
| */ |
| static void do_alert_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* decode message */ |
| if (capi_message2cmsg(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| send_conf(iif, ap, skb, CapiAlertAlreadySent); |
| } |
| |
| /* |
| * process CONNECT_REQ message |
| * allocate a B channel, prepare dial commands, queue a DIAL event, |
| * emit CONNECT_CONF reply |
| */ |
| static void do_connect_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| char **commands; |
| char *s; |
| u8 *pp; |
| unsigned long flags; |
| int i, l, lbc, lhlc; |
| u16 info; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* get free B channel & construct PLCI */ |
| bcs = gigaset_get_free_channel(cs); |
| if (!bcs) { |
| dev_notice(cs->dev, "%s: no B channel available\n", |
| "CONNECT_REQ"); |
| send_conf(iif, ap, skb, CapiNoPlciAvailable); |
| return; |
| } |
| spin_lock_irqsave(&bcs->aplock, flags); |
| if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) |
| dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n", |
| __func__, bcs->ap, bcs->apconnstate); |
| ap->bcnext = NULL; |
| bcs->ap = ap; |
| bcs->apconnstate = APCONN_SETUP; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| bcs->rx_bufsize = ap->rp.datablklen; |
| dev_kfree_skb(bcs->rx_skb); |
| gigaset_new_rx_skb(bcs); |
| cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8; |
| |
| /* build command table */ |
| commands = kzalloc(AT_NUM * (sizeof *commands), GFP_KERNEL); |
| if (!commands) |
| goto oom; |
| |
| /* encode parameter: Called party number */ |
| pp = cmsg->CalledPartyNumber; |
| if (pp == NULL || *pp == 0) { |
| dev_notice(cs->dev, "%s: %s missing\n", |
| "CONNECT_REQ", "Called party number"); |
| info = CapiIllMessageParmCoding; |
| goto error; |
| } |
| l = *pp++; |
| /* check type of number/numbering plan byte */ |
| switch (*pp) { |
| case 0x80: /* unknown type / unknown numbering plan */ |
| case 0x81: /* unknown type / ISDN/Telephony numbering plan */ |
| break; |
| default: /* others: warn about potential misinterpretation */ |
| dev_notice(cs->dev, "%s: %s type/plan 0x%02x unsupported\n", |
| "CONNECT_REQ", "Called party number", *pp); |
| } |
| pp++; |
| l--; |
| /* translate "**" internal call prefix to CTP value */ |
| if (l >= 2 && pp[0] == '*' && pp[1] == '*') { |
| s = "^SCTP=0\r"; |
| pp += 2; |
| l -= 2; |
| } else { |
| s = "^SCTP=1\r"; |
| } |
| commands[AT_TYPE] = kstrdup(s, GFP_KERNEL); |
| if (!commands[AT_TYPE]) |
| goto oom; |
| commands[AT_DIAL] = kmalloc(l + 3, GFP_KERNEL); |
| if (!commands[AT_DIAL]) |
| goto oom; |
| snprintf(commands[AT_DIAL], l + 3, "D%.*s\r", l, pp); |
| |
| /* encode parameter: Calling party number */ |
| pp = cmsg->CallingPartyNumber; |
| if (pp != NULL && *pp > 0) { |
| l = *pp++; |
| |
| /* check type of number/numbering plan byte */ |
| /* ToDo: allow for/handle Ext=1? */ |
| switch (*pp) { |
| case 0x00: /* unknown type / unknown numbering plan */ |
| case 0x01: /* unknown type / ISDN/Telephony num. plan */ |
| break; |
| default: |
| dev_notice(cs->dev, |
| "%s: %s type/plan 0x%02x unsupported\n", |
| "CONNECT_REQ", "Calling party number", *pp); |
| } |
| pp++; |
| l--; |
| |
| /* check presentation indicator */ |
| if (!l) { |
| dev_notice(cs->dev, "%s: %s IE truncated\n", |
| "CONNECT_REQ", "Calling party number"); |
| info = CapiIllMessageParmCoding; |
| goto error; |
| } |
| switch (*pp & 0xfc) { /* ignore Screening indicator */ |
| case 0x80: /* Presentation allowed */ |
| s = "^SCLIP=1\r"; |
| break; |
| case 0xa0: /* Presentation restricted */ |
| s = "^SCLIP=0\r"; |
| break; |
| default: |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "CONNECT_REQ", |
| "Presentation/Screening indicator", |
| *pp); |
| s = "^SCLIP=1\r"; |
| } |
| commands[AT_CLIP] = kstrdup(s, GFP_KERNEL); |
| if (!commands[AT_CLIP]) |
| goto oom; |
| pp++; |
| l--; |
| |
| if (l) { |
| /* number */ |
| commands[AT_MSN] = kmalloc(l + 8, GFP_KERNEL); |
| if (!commands[AT_MSN]) |
| goto oom; |
| snprintf(commands[AT_MSN], l + 8, "^SMSN=%*s\r", l, pp); |
| } |
| } |
| |
| /* check parameter: CIP Value */ |
| if (cmsg->CIPValue >= ARRAY_SIZE(cip2bchlc) || |
| (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) { |
| dev_notice(cs->dev, "%s: unknown CIP value %d\n", |
| "CONNECT_REQ", cmsg->CIPValue); |
| info = CapiCipValueUnknown; |
| goto error; |
| } |
| |
| /* |
| * check/encode parameters: BC & HLC |
| * must be encoded together as device doesn't accept HLC separately |
| * explicit parameters override values derived from CIP |
| */ |
| |
| /* determine lengths */ |
| if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */ |
| lbc = 2 * cmsg->BC[0]; |
| else if (cip2bchlc[cmsg->CIPValue].bc) /* BC derived from CIP */ |
| lbc = strlen(cip2bchlc[cmsg->CIPValue].bc); |
| else /* no BC */ |
| lbc = 0; |
| if (cmsg->HLC && cmsg->HLC[0]) /* HLC specified explicitly */ |
| lhlc = 2 * cmsg->HLC[0]; |
| else if (cip2bchlc[cmsg->CIPValue].hlc) /* HLC derived from CIP */ |
| lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc); |
| else /* no HLC */ |
| lhlc = 0; |
| |
| if (lbc) { |
| /* have BC: allocate and assemble command string */ |
| l = lbc + 7; /* "^SBC=" + value + "\r" + null byte */ |
| if (lhlc) |
| l += lhlc + 7; /* ";^SHLC=" + value */ |
| commands[AT_BC] = kmalloc(l, GFP_KERNEL); |
| if (!commands[AT_BC]) |
| goto oom; |
| strcpy(commands[AT_BC], "^SBC="); |
| if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */ |
| decode_ie(cmsg->BC, commands[AT_BC] + 5); |
| else /* BC derived from CIP */ |
| strcpy(commands[AT_BC] + 5, |
| cip2bchlc[cmsg->CIPValue].bc); |
| if (lhlc) { |
| strcpy(commands[AT_BC] + lbc + 5, ";^SHLC="); |
| if (cmsg->HLC && cmsg->HLC[0]) |
| /* HLC specified explicitly */ |
| decode_ie(cmsg->HLC, |
| commands[AT_BC] + lbc + 12); |
| else /* HLC derived from CIP */ |
| strcpy(commands[AT_BC] + lbc + 12, |
| cip2bchlc[cmsg->CIPValue].hlc); |
| } |
| strcpy(commands[AT_BC] + l - 2, "\r"); |
| } else { |
| /* no BC */ |
| if (lhlc) { |
| dev_notice(cs->dev, "%s: cannot set HLC without BC\n", |
| "CONNECT_REQ"); |
| info = CapiIllMessageParmCoding; /* ? */ |
| goto error; |
| } |
| } |
| |
| /* check/encode parameter: B Protocol */ |
| if (cmsg->BProtocol == CAPI_DEFAULT) { |
| bcs->proto2 = L2_HDLC; |
| dev_warn(cs->dev, |
| "B2 Protocol X.75 SLP unsupported, using Transparent\n"); |
| } else { |
| switch (cmsg->B1protocol) { |
| case 0: |
| bcs->proto2 = L2_HDLC; |
| break; |
| case 1: |
| bcs->proto2 = L2_VOICE; |
| break; |
| default: |
| dev_warn(cs->dev, |
| "B1 Protocol %u unsupported, using Transparent\n", |
| cmsg->B1protocol); |
| bcs->proto2 = L2_VOICE; |
| } |
| if (cmsg->B2protocol != 1) |
| dev_warn(cs->dev, |
| "B2 Protocol %u unsupported, using Transparent\n", |
| cmsg->B2protocol); |
| if (cmsg->B3protocol != 0) |
| dev_warn(cs->dev, |
| "B3 Protocol %u unsupported, using Transparent\n", |
| cmsg->B3protocol); |
| ignore_cstruct_param(cs, cmsg->B1configuration, |
| "CONNECT_REQ", "B1 Configuration"); |
| ignore_cstruct_param(cs, cmsg->B2configuration, |
| "CONNECT_REQ", "B2 Configuration"); |
| ignore_cstruct_param(cs, cmsg->B3configuration, |
| "CONNECT_REQ", "B3 Configuration"); |
| } |
| commands[AT_PROTO] = kmalloc(9, GFP_KERNEL); |
| if (!commands[AT_PROTO]) |
| goto oom; |
| snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2); |
| |
| /* ToDo: check/encode remaining parameters */ |
| ignore_cstruct_param(cs, cmsg->CalledPartySubaddress, |
| "CONNECT_REQ", "Called pty subaddr"); |
| ignore_cstruct_param(cs, cmsg->CallingPartySubaddress, |
| "CONNECT_REQ", "Calling pty subaddr"); |
| ignore_cstruct_param(cs, cmsg->LLC, |
| "CONNECT_REQ", "LLC"); |
| if (cmsg->AdditionalInfo != CAPI_DEFAULT) { |
| ignore_cstruct_param(cs, cmsg->BChannelinformation, |
| "CONNECT_REQ", "B Channel Information"); |
| ignore_cstruct_param(cs, cmsg->Keypadfacility, |
| "CONNECT_REQ", "Keypad Facility"); |
| ignore_cstruct_param(cs, cmsg->Useruserdata, |
| "CONNECT_REQ", "User-User Data"); |
| ignore_cstruct_param(cs, cmsg->Facilitydataarray, |
| "CONNECT_REQ", "Facility Data Array"); |
| } |
| |
| /* encode parameter: B channel to use */ |
| commands[AT_ISO] = kmalloc(9, GFP_KERNEL); |
| if (!commands[AT_ISO]) |
| goto oom; |
| snprintf(commands[AT_ISO], 9, "^SISO=%u\r", |
| (unsigned) bcs->channel + 1); |
| |
| /* queue & schedule EV_DIAL event */ |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands, |
| bcs->at_state.seq_index, NULL)) { |
| info = CAPI_MSGOSRESOURCEERR; |
| goto error; |
| } |
| gigaset_schedule_event(cs); |
| send_conf(iif, ap, skb, CapiSuccess); |
| return; |
| |
| oom: |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| info = CAPI_MSGOSRESOURCEERR; |
| error: |
| if (commands) |
| for (i = 0; i < AT_NUM; i++) |
| kfree(commands[i]); |
| kfree(commands); |
| gigaset_free_channel(bcs); |
| send_conf(iif, ap, skb, info); |
| } |
| |
| /* |
| * process CONNECT_RESP message |
| * checks protocol parameters and queues an ACCEPT or HUP event |
| */ |
| static void do_connect_resp(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| struct gigaset_capi_appl *oap; |
| unsigned long flags; |
| int channel; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| dev_kfree_skb_any(skb); |
| |
| /* extract and check channel number from PLCI */ |
| channel = (cmsg->adr.adrPLCI >> 8) & 0xff; |
| if (!channel || channel > cs->channels) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "CONNECT_RESP", "PLCI", cmsg->adr.adrPLCI); |
| return; |
| } |
| bcs = cs->bcs + channel - 1; |
| |
| switch (cmsg->Reject) { |
| case 0: /* Accept */ |
| /* drop all competing applications, keep only this one */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| while (bcs->ap != NULL) { |
| oap = bcs->ap; |
| bcs->ap = oap->bcnext; |
| if (oap != ap) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| send_disconnect_ind(bcs, oap, |
| CapiCallGivenToOtherApplication); |
| spin_lock_irqsave(&bcs->aplock, flags); |
| } |
| } |
| ap->bcnext = NULL; |
| bcs->ap = ap; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| bcs->rx_bufsize = ap->rp.datablklen; |
| dev_kfree_skb(bcs->rx_skb); |
| gigaset_new_rx_skb(bcs); |
| bcs->chstate |= CHS_NOTIFY_LL; |
| |
| /* check/encode B channel protocol */ |
| if (cmsg->BProtocol == CAPI_DEFAULT) { |
| bcs->proto2 = L2_HDLC; |
| dev_warn(cs->dev, |
| "B2 Protocol X.75 SLP unsupported, using Transparent\n"); |
| } else { |
| switch (cmsg->B1protocol) { |
| case 0: |
| bcs->proto2 = L2_HDLC; |
| break; |
| case 1: |
| bcs->proto2 = L2_VOICE; |
| break; |
| default: |
| dev_warn(cs->dev, |
| "B1 Protocol %u unsupported, using Transparent\n", |
| cmsg->B1protocol); |
| bcs->proto2 = L2_VOICE; |
| } |
| if (cmsg->B2protocol != 1) |
| dev_warn(cs->dev, |
| "B2 Protocol %u unsupported, using Transparent\n", |
| cmsg->B2protocol); |
| if (cmsg->B3protocol != 0) |
| dev_warn(cs->dev, |
| "B3 Protocol %u unsupported, using Transparent\n", |
| cmsg->B3protocol); |
| ignore_cstruct_param(cs, cmsg->B1configuration, |
| "CONNECT_RESP", "B1 Configuration"); |
| ignore_cstruct_param(cs, cmsg->B2configuration, |
| "CONNECT_RESP", "B2 Configuration"); |
| ignore_cstruct_param(cs, cmsg->B3configuration, |
| "CONNECT_RESP", "B3 Configuration"); |
| } |
| |
| /* ToDo: check/encode remaining parameters */ |
| ignore_cstruct_param(cs, cmsg->ConnectedNumber, |
| "CONNECT_RESP", "Connected Number"); |
| ignore_cstruct_param(cs, cmsg->ConnectedSubaddress, |
| "CONNECT_RESP", "Connected Subaddress"); |
| ignore_cstruct_param(cs, cmsg->LLC, |
| "CONNECT_RESP", "LLC"); |
| if (cmsg->AdditionalInfo != CAPI_DEFAULT) { |
| ignore_cstruct_param(cs, cmsg->BChannelinformation, |
| "CONNECT_RESP", "BChannel Information"); |
| ignore_cstruct_param(cs, cmsg->Keypadfacility, |
| "CONNECT_RESP", "Keypad Facility"); |
| ignore_cstruct_param(cs, cmsg->Useruserdata, |
| "CONNECT_RESP", "User-User Data"); |
| ignore_cstruct_param(cs, cmsg->Facilitydataarray, |
| "CONNECT_RESP", "Facility Data Array"); |
| } |
| |
| /* Accept call */ |
| if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state, |
| EV_ACCEPT, NULL, 0, NULL)) |
| return; |
| gigaset_schedule_event(cs); |
| return; |
| |
| case 1: /* Ignore */ |
| /* send DISCONNECT_IND to this application */ |
| send_disconnect_ind(bcs, ap, 0); |
| |
| /* remove it from the list of listening apps */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| if (bcs->ap == ap) { |
| bcs->ap = ap->bcnext; |
| if (bcs->ap == NULL) { |
| /* last one: stop ev-layer hupD notifications */ |
| bcs->apconnstate = APCONN_NONE; |
| bcs->chstate &= ~CHS_NOTIFY_LL; |
| } |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| return; |
| } |
| for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) { |
| if (oap->bcnext == ap) { |
| oap->bcnext = oap->bcnext->bcnext; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| return; |
| } |
| } |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| dev_err(cs->dev, "%s: application %u not found\n", |
| __func__, ap->id); |
| return; |
| |
| default: /* Reject */ |
| /* drop all competing applications, keep only this one */ |
| spin_lock_irqsave(&bcs->aplock, flags); |
| while (bcs->ap != NULL) { |
| oap = bcs->ap; |
| bcs->ap = oap->bcnext; |
| if (oap != ap) { |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| send_disconnect_ind(bcs, oap, |
| CapiCallGivenToOtherApplication); |
| spin_lock_irqsave(&bcs->aplock, flags); |
| } |
| } |
| ap->bcnext = NULL; |
| bcs->ap = ap; |
| spin_unlock_irqrestore(&bcs->aplock, flags); |
| |
| /* reject call - will trigger DISCONNECT_IND for this app */ |
| dev_info(cs->dev, "%s: Reject=%x\n", |
| "CONNECT_RESP", cmsg->Reject); |
| if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state, |
| EV_HUP, NULL, 0, NULL)) |
| return; |
| gigaset_schedule_event(cs); |
| return; |
| } |
| } |
| |
| /* |
| * process CONNECT_B3_REQ message |
| * build NCCI and emit CONNECT_B3_CONF reply |
| */ |
| static void do_connect_b3_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| int channel; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* extract and check channel number from PLCI */ |
| channel = (cmsg->adr.adrPLCI >> 8) & 0xff; |
| if (!channel || channel > cs->channels) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI); |
| send_conf(iif, ap, skb, CapiIllContrPlciNcci); |
| return; |
| } |
| bcs = &cs->bcs[channel - 1]; |
| |
| /* mark logical connection active */ |
| bcs->apconnstate = APCONN_ACTIVE; |
| |
| /* build NCCI: always 1 (one B3 connection only) */ |
| cmsg->adr.adrNCCI |= 1 << 16; |
| |
| /* NCPI parameter: not applicable for B3 Transparent */ |
| ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI"); |
| send_conf(iif, ap, skb, |
| (cmsg->NCPI && cmsg->NCPI[0]) ? |
| CapiNcpiNotSupportedByProtocol : CapiSuccess); |
| } |
| |
| /* |
| * process CONNECT_B3_RESP message |
| * Depending on the Reject parameter, either emit CONNECT_B3_ACTIVE_IND |
| * or queue EV_HUP and emit DISCONNECT_B3_IND. |
| * The emitted message is always shorter than the received one, |
| * allowing to reuse the skb. |
| */ |
| static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| int channel; |
| unsigned int msgsize; |
| u8 command; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* extract and check channel number and NCCI */ |
| channel = (cmsg->adr.adrNCCI >> 8) & 0xff; |
| if (!channel || channel > cs->channels || |
| ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| bcs = &cs->bcs[channel - 1]; |
| |
| if (cmsg->Reject) { |
| /* Reject: clear B3 connect received flag */ |
| bcs->apconnstate = APCONN_SETUP; |
| |
| /* trigger hangup, causing eventual DISCONNECT_IND */ |
| if (!gigaset_add_event(cs, &bcs->at_state, |
| EV_HUP, NULL, 0, NULL)) { |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| gigaset_schedule_event(cs); |
| |
| /* emit DISCONNECT_B3_IND */ |
| command = CAPI_DISCONNECT_B3; |
| msgsize = CAPI_DISCONNECT_B3_IND_BASELEN; |
| } else { |
| /* |
| * Accept: emit CONNECT_B3_ACTIVE_IND immediately, as |
| * we only send CONNECT_B3_IND if the B channel is up |
| */ |
| command = CAPI_CONNECT_B3_ACTIVE; |
| msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; |
| } |
| capi_cmsg_header(cmsg, ap->id, command, CAPI_IND, |
| ap->nextMessageNumber++, cmsg->adr.adrNCCI); |
| __skb_trim(skb, msgsize); |
| if (capi_cmsg2message(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, skb); |
| } |
| |
| /* |
| * process DISCONNECT_REQ message |
| * schedule EV_HUP and emit DISCONNECT_B3_IND if necessary, |
| * emit DISCONNECT_CONF reply |
| */ |
| static void do_disconnect_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| _cmsg *b3cmsg; |
| struct sk_buff *b3skb; |
| int channel; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* extract and check channel number from PLCI */ |
| channel = (cmsg->adr.adrPLCI >> 8) & 0xff; |
| if (!channel || channel > cs->channels) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI); |
| send_conf(iif, ap, skb, CapiIllContrPlciNcci); |
| return; |
| } |
| bcs = cs->bcs + channel - 1; |
| |
| /* ToDo: process parameter: Additional info */ |
| if (cmsg->AdditionalInfo != CAPI_DEFAULT) { |
| ignore_cstruct_param(cs, cmsg->BChannelinformation, |
| "DISCONNECT_REQ", "B Channel Information"); |
| ignore_cstruct_param(cs, cmsg->Keypadfacility, |
| "DISCONNECT_REQ", "Keypad Facility"); |
| ignore_cstruct_param(cs, cmsg->Useruserdata, |
| "DISCONNECT_REQ", "User-User Data"); |
| ignore_cstruct_param(cs, cmsg->Facilitydataarray, |
| "DISCONNECT_REQ", "Facility Data Array"); |
| } |
| |
| /* skip if DISCONNECT_IND already sent */ |
| if (!bcs->apconnstate) |
| return; |
| |
| /* check for active logical connection */ |
| if (bcs->apconnstate >= APCONN_ACTIVE) { |
| /* clear it */ |
| bcs->apconnstate = APCONN_SETUP; |
| |
| /* |
| * emit DISCONNECT_B3_IND with cause 0x3301 |
| * use separate cmsg structure, as the content of iif->acmsg |
| * is still needed for creating the _CONF message |
| */ |
| b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL); |
| if (!b3cmsg) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); |
| return; |
| } |
| capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, |
| ap->nextMessageNumber++, |
| cmsg->adr.adrPLCI | (1 << 16)); |
| b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; |
| b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); |
| if (b3skb == NULL) { |
| dev_err(cs->dev, "%s: out of memory\n", __func__); |
| send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); |
| kfree(b3cmsg); |
| return; |
| } |
| if (capi_cmsg2message(b3cmsg, |
| __skb_put(b3skb, CAPI_DISCONNECT_B3_IND_BASELEN))) { |
| dev_err(cs->dev, "%s: message parser failure\n", |
| __func__); |
| kfree(b3cmsg); |
| dev_kfree_skb_any(b3skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, b3cmsg); |
| kfree(b3cmsg); |
| capi_ctr_handle_message(&iif->ctr, ap->id, b3skb); |
| } |
| |
| /* trigger hangup, causing eventual DISCONNECT_IND */ |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { |
| send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); |
| return; |
| } |
| gigaset_schedule_event(cs); |
| |
| /* emit reply */ |
| send_conf(iif, ap, skb, CapiSuccess); |
| } |
| |
| /* |
| * process DISCONNECT_B3_REQ message |
| * schedule EV_HUP and emit DISCONNECT_B3_CONF reply |
| */ |
| static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| _cmsg *cmsg = &iif->acmsg; |
| struct bc_state *bcs; |
| int channel; |
| |
| /* decode message */ |
| if (capi_message2cmsg(cmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, cmsg); |
| |
| /* extract and check channel number and NCCI */ |
| channel = (cmsg->adr.adrNCCI >> 8) & 0xff; |
| if (!channel || channel > cs->channels || |
| ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI); |
| send_conf(iif, ap, skb, CapiIllContrPlciNcci); |
| return; |
| } |
| bcs = &cs->bcs[channel - 1]; |
| |
| /* reject if logical connection not active */ |
| if (bcs->apconnstate < APCONN_ACTIVE) { |
| send_conf(iif, ap, skb, |
| CapiMessageNotSupportedInCurrentState); |
| return; |
| } |
| |
| /* trigger hangup, causing eventual DISCONNECT_B3_IND */ |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { |
| send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); |
| return; |
| } |
| gigaset_schedule_event(cs); |
| |
| /* NCPI parameter: not applicable for B3 Transparent */ |
| ignore_cstruct_param(cs, cmsg->NCPI, |
| "DISCONNECT_B3_REQ", "NCPI"); |
| send_conf(iif, ap, skb, |
| (cmsg->NCPI && cmsg->NCPI[0]) ? |
| CapiNcpiNotSupportedByProtocol : CapiSuccess); |
| } |
| |
| /* |
| * process DATA_B3_REQ message |
| */ |
| static void do_data_b3_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| struct bc_state *bcs; |
| int channel = CAPIMSG_PLCI_PART(skb->data); |
| u16 ncci = CAPIMSG_NCCI_PART(skb->data); |
| u16 msglen = CAPIMSG_LEN(skb->data); |
| u16 datalen = CAPIMSG_DATALEN(skb->data); |
| u16 flags = CAPIMSG_FLAGS(skb->data); |
| u16 msgid = CAPIMSG_MSGID(skb->data); |
| u16 handle = CAPIMSG_HANDLE_REQ(skb->data); |
| |
| /* frequent message, avoid _cmsg overhead */ |
| dump_rawmsg(DEBUG_MCMD, __func__, skb->data); |
| |
| /* check parameters */ |
| if (channel == 0 || channel > cs->channels || ncci != 1) { |
| dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", |
| "DATA_B3_REQ", "NCCI", CAPIMSG_NCCI(skb->data)); |
| send_conf(iif, ap, skb, CapiIllContrPlciNcci); |
| return; |
| } |
| bcs = &cs->bcs[channel - 1]; |
| if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64) |
| dev_notice(cs->dev, "%s: unexpected length %d\n", |
| "DATA_B3_REQ", msglen); |
| if (msglen + datalen != skb->len) |
| dev_notice(cs->dev, "%s: length mismatch (%d+%d!=%d)\n", |
| "DATA_B3_REQ", msglen, datalen, skb->len); |
| if (msglen + datalen > skb->len) { |
| /* message too short for announced data length */ |
| send_conf(iif, ap, skb, CapiIllMessageParmCoding); /* ? */ |
| return; |
| } |
| if (flags & CAPI_FLAGS_RESERVED) { |
| dev_notice(cs->dev, "%s: reserved flags set (%x)\n", |
| "DATA_B3_REQ", flags); |
| send_conf(iif, ap, skb, CapiIllMessageParmCoding); |
| return; |
| } |
| |
| /* reject if logical connection not active */ |
| if (bcs->apconnstate < APCONN_ACTIVE) { |
| send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState); |
| return; |
| } |
| |
| /* pull CAPI message into link layer header */ |
| skb_reset_mac_header(skb); |
| skb->mac_len = msglen; |
| skb_pull(skb, msglen); |
| |
| /* pass to device-specific module */ |
| if (cs->ops->send_skb(bcs, skb) < 0) { |
| send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); |
| return; |
| } |
| |
| /* |
| * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery |
| * confirmation" bit is set; otherwise we have to send it now |
| */ |
| if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)) |
| send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle, |
| flags ? CapiFlagsNotSupportedByProtocol |
| : CAPI_NOERROR); |
| } |
| |
| /* |
| * process RESET_B3_REQ message |
| * just always reply "not supported by current protocol" |
| */ |
| static void do_reset_b3_req(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* decode message */ |
| if (capi_message2cmsg(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| send_conf(iif, ap, skb, |
| CapiResetProcedureNotSupportedByCurrentProtocol); |
| } |
| |
| /* |
| * unsupported CAPI message handler |
| */ |
| static void do_unsupported(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* decode message */ |
| if (capi_message2cmsg(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState); |
| } |
| |
| /* |
| * CAPI message handler: no-op |
| */ |
| static void do_nothing(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = iif->ctr.driverdata; |
| |
| /* decode message */ |
| if (capi_message2cmsg(&iif->acmsg, skb->data)) { |
| dev_err(cs->dev, "%s: message parser failure\n", __func__); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); |
| dev_kfree_skb_any(skb); |
| } |
| |
| static void do_data_b3_resp(struct gigaset_capi_ctr *iif, |
| struct gigaset_capi_appl *ap, |
| struct sk_buff *skb) |
| { |
| dump_rawmsg(DEBUG_MCMD, __func__, skb->data); |
| dev_kfree_skb_any(skb); |
| } |
| |
| /* table of outgoing CAPI message handlers with lookup function */ |
| typedef void (*capi_send_handler_t)(struct gigaset_capi_ctr *, |
| struct gigaset_capi_appl *, |
| struct sk_buff *); |
| |
| static struct { |
| u16 cmd; |
| capi_send_handler_t handler; |
| } capi_send_handler_table[] = { |
| /* most frequent messages first for faster lookup */ |
| { CAPI_DATA_B3_REQ, do_data_b3_req }, |
| { CAPI_DATA_B3_RESP, do_data_b3_resp }, |
| |
| { CAPI_ALERT_REQ, do_alert_req }, |
| { CAPI_CONNECT_ACTIVE_RESP, do_nothing }, |
| { CAPI_CONNECT_B3_ACTIVE_RESP, do_nothing }, |
| { CAPI_CONNECT_B3_REQ, do_connect_b3_req }, |
| { CAPI_CONNECT_B3_RESP, do_connect_b3_resp }, |
| { CAPI_CONNECT_B3_T90_ACTIVE_RESP, do_nothing }, |
| { CAPI_CONNECT_REQ, do_connect_req }, |
| { CAPI_CONNECT_RESP, do_connect_resp }, |
| { CAPI_DISCONNECT_B3_REQ, do_disconnect_b3_req }, |
| { CAPI_DISCONNECT_B3_RESP, do_nothing }, |
| { CAPI_DISCONNECT_REQ, do_disconnect_req }, |
| { CAPI_DISCONNECT_RESP, do_nothing }, |
| { CAPI_FACILITY_REQ, do_facility_req }, |
| { CAPI_FACILITY_RESP, do_nothing }, |
| { CAPI_LISTEN_REQ, do_listen_req }, |
| { CAPI_SELECT_B_PROTOCOL_REQ, do_unsupported }, |
| { CAPI_RESET_B3_REQ, do_reset_b3_req }, |
| { CAPI_RESET_B3_RESP, do_nothing }, |
| |
| /* |
| * ToDo: support overlap sending (requires ev-layer state |
| * machine extension to generate additional ATD commands) |
| */ |
| { CAPI_INFO_REQ, do_unsupported }, |
| { CAPI_INFO_RESP, do_nothing }, |
| |
| /* |
| * ToDo: what's the proper response for these? |
| */ |
| { CAPI_MANUFACTURER_REQ, do_nothing }, |
| { CAPI_MANUFACTURER_RESP, do_nothing }, |
| }; |
| |
| /* look up handler */ |
| static inline capi_send_handler_t lookup_capi_send_handler(const u16 cmd) |
| { |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(capi_send_handler_table); i++) |
| if (capi_send_handler_table[i].cmd == cmd) |
| return capi_send_handler_table[i].handler; |
| return NULL; |
| } |
| |
| |
| /** |
| * gigaset_send_message() - accept a CAPI message from an application |
| * @ctr: controller descriptor structure. |
| * @skb: CAPI message. |
| * |
| * Return value: CAPI error code |
| * Note: capidrv (and probably others, too) only uses the return value to |
| * decide whether it has to free the skb (only if result != CAPI_NOERROR (0)) |
| */ |
| static u16 gigaset_send_message(struct capi_ctr *ctr, struct sk_buff *skb) |
| { |
| struct gigaset_capi_ctr *iif |
| = container_of(ctr, struct gigaset_capi_ctr, ctr); |
| struct cardstate *cs = ctr->driverdata; |
| struct gigaset_capi_appl *ap; |
| capi_send_handler_t handler; |
| |
| /* can only handle linear sk_buffs */ |
| if (skb_linearize(skb) < 0) { |
| dev_warn(cs->dev, "%s: skb_linearize failed\n", __func__); |
| return CAPI_MSGOSRESOURCEERR; |
| } |
| |
| /* retrieve application data structure */ |
| ap = get_appl(iif, CAPIMSG_APPID(skb->data)); |
| if (!ap) { |
| dev_notice(cs->dev, "%s: application %u not registered\n", |
| __func__, CAPIMSG_APPID(skb->data)); |
| return CAPI_ILLAPPNR; |
| } |
| |
| /* look up command */ |
| handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data)); |
| if (!handler) { |
| /* unknown/unsupported message type */ |
| if (printk_ratelimit()) |
| dev_notice(cs->dev, "%s: unsupported message %u\n", |
| __func__, CAPIMSG_CMD(skb->data)); |
| return CAPI_ILLCMDORSUBCMDORMSGTOSMALL; |
| } |
| |
| /* serialize */ |
| if (atomic_add_return(1, &iif->sendqlen) > 1) { |
| /* queue behind other messages */ |
| skb_queue_tail(&iif->sendqueue, skb); |
| return CAPI_NOERROR; |
| } |
| |
| /* process message */ |
| handler(iif, ap, skb); |
| |
| /* process other messages arrived in the meantime */ |
| while (atomic_sub_return(1, &iif->sendqlen) > 0) { |
| skb = skb_dequeue(&iif->sendqueue); |
| if (!skb) { |
| /* should never happen */ |
| dev_err(cs->dev, "%s: send queue empty\n", __func__); |
| continue; |
| } |
| ap = get_appl(iif, CAPIMSG_APPID(skb->data)); |
| if (!ap) { |
| /* could that happen? */ |
| dev_warn(cs->dev, "%s: application %u vanished\n", |
| __func__, CAPIMSG_APPID(skb->data)); |
| continue; |
| } |
| handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data)); |
| if (!handler) { |
| /* should never happen */ |
| dev_err(cs->dev, "%s: handler %x vanished\n", |
| __func__, CAPIMSG_CMD(skb->data)); |
| continue; |
| } |
| handler(iif, ap, skb); |
| } |
| |
| return CAPI_NOERROR; |
| } |
| |
| /** |
| * gigaset_procinfo() - build single line description for controller |
| * @ctr: controller descriptor structure. |
| * |
| * Return value: pointer to generated string (null terminated) |
| */ |
| static char *gigaset_procinfo(struct capi_ctr *ctr) |
| { |
| return ctr->name; /* ToDo: more? */ |
| } |
| |
| static int gigaset_proc_show(struct seq_file *m, void *v) |
| { |
| struct capi_ctr *ctr = m->private; |
| struct cardstate *cs = ctr->driverdata; |
| char *s; |
| int i; |
| |
| seq_printf(m, "%-16s %s\n", "name", ctr->name); |
| seq_printf(m, "%-16s %s %s\n", "dev", |
| dev_driver_string(cs->dev), dev_name(cs->dev)); |
| seq_printf(m, "%-16s %d\n", "id", cs->myid); |
| if (cs->gotfwver) |
| seq_printf(m, "%-16s %d.%d.%d.%d\n", "firmware", |
| cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]); |
| seq_printf(m, "%-16s %d\n", "channels", cs->channels); |
| seq_printf(m, "%-16s %s\n", "onechannel", cs->onechannel ? "yes" : "no"); |
| |
| switch (cs->mode) { |
| case M_UNKNOWN: |
| s = "unknown"; |
| break; |
| case M_CONFIG: |
| s = "config"; |
| break; |
| case M_UNIMODEM: |
| s = "Unimodem"; |
| break; |
| case M_CID: |
| s = "CID"; |
| break; |
| default: |
| s = "??"; |
| } |
| seq_printf(m, "%-16s %s\n", "mode", s); |
| |
| switch (cs->mstate) { |
| case MS_UNINITIALIZED: |
| s = "uninitialized"; |
| break; |
| case MS_INIT: |
| s = "init"; |
| break; |
| case MS_LOCKED: |
| s = "locked"; |
| break; |
| case MS_SHUTDOWN: |
| s = "shutdown"; |
| break; |
| case MS_RECOVER: |
| s = "recover"; |
| break; |
| case MS_READY: |
| s = "ready"; |
| break; |
| default: |
| s = "??"; |
| } |
| seq_printf(m, "%-16s %s\n", "mstate", s); |
| |
| seq_printf(m, "%-16s %s\n", "running", cs->running ? "yes" : "no"); |
| seq_printf(m, "%-16s %s\n", "connected", cs->connected ? "yes" : "no"); |
| seq_printf(m, "%-16s %s\n", "isdn_up", cs->isdn_up ? "yes" : "no"); |
| seq_printf(m, "%-16s %s\n", "cidmode", cs->cidmode ? "yes" : "no"); |
| |
| for (i = 0; i < cs->channels; i++) { |
| seq_printf(m, "[%d]%-13s %d\n", i, "corrupted", |
| cs->bcs[i].corrupted); |
| seq_printf(m, "[%d]%-13s %d\n", i, "trans_down", |
| cs->bcs[i].trans_down); |
| seq_printf(m, "[%d]%-13s %d\n", i, "trans_up", |
| cs->bcs[i].trans_up); |
| seq_printf(m, "[%d]%-13s %d\n", i, "chstate", |
| cs->bcs[i].chstate); |
| switch (cs->bcs[i].proto2) { |
| case L2_BITSYNC: |
| s = "bitsync"; |
| break; |
| case L2_HDLC: |
| s = "HDLC"; |
| break; |
| case L2_VOICE: |
| s = "voice"; |
| break; |
| default: |
| s = "??"; |
| } |
| seq_printf(m, "[%d]%-13s %s\n", i, "proto2", s); |
| } |
| return 0; |
| } |
| |
| static int gigaset_proc_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, gigaset_proc_show, PDE_DATA(inode)); |
| } |
| |
| static const struct file_operations gigaset_proc_fops = { |
| .owner = THIS_MODULE, |
| .open = gigaset_proc_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| /** |
| * gigaset_isdn_regdev() - register device to LL |
| * @cs: device descriptor structure. |
| * @isdnid: device name. |
| * |
| * Return value: 0 on success, error code < 0 on failure |
| */ |
| int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid) |
| { |
| struct gigaset_capi_ctr *iif; |
| int rc; |
| |
| iif = kzalloc(sizeof(*iif), GFP_KERNEL); |
| if (!iif) { |
| pr_err("%s: out of memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| /* prepare controller structure */ |
| iif->ctr.owner = THIS_MODULE; |
| iif->ctr.driverdata = cs; |
| strncpy(iif->ctr.name, isdnid, sizeof(iif->ctr.name) - 1); |
| iif->ctr.driver_name = "gigaset"; |
| iif->ctr.load_firmware = NULL; |
| iif->ctr.reset_ctr = NULL; |
| iif->ctr.register_appl = gigaset_register_appl; |
| iif->ctr.release_appl = gigaset_release_appl; |
| iif->ctr.send_message = gigaset_send_message; |
| iif->ctr.procinfo = gigaset_procinfo; |
| iif->ctr.proc_fops = &gigaset_proc_fops; |
| INIT_LIST_HEAD(&iif->appls); |
| skb_queue_head_init(&iif->sendqueue); |
| atomic_set(&iif->sendqlen, 0); |
| |
| /* register controller with CAPI */ |
| rc = attach_capi_ctr(&iif->ctr); |
| if (rc) { |
| pr_err("attach_capi_ctr failed (%d)\n", rc); |
| kfree(iif); |
| return rc; |
| } |
| |
| cs->iif = iif; |
| cs->hw_hdr_len = CAPI_DATA_B3_REQ_LEN; |
| return 0; |
| } |
| |
| /** |
| * gigaset_isdn_unregdev() - unregister device from LL |
| * @cs: device descriptor structure. |
| */ |
| void gigaset_isdn_unregdev(struct cardstate *cs) |
| { |
| struct gigaset_capi_ctr *iif = cs->iif; |
| |
| detach_capi_ctr(&iif->ctr); |
| kfree(iif); |
| cs->iif = NULL; |
| } |
| |
| static struct capi_driver capi_driver_gigaset = { |
| .name = "gigaset", |
| .revision = "1.0", |
| }; |
| |
| /** |
| * gigaset_isdn_regdrv() - register driver to LL |
| */ |
| void gigaset_isdn_regdrv(void) |
| { |
| pr_info("Kernel CAPI interface\n"); |
| register_capi_driver(&capi_driver_gigaset); |
| } |
| |
| /** |
| * gigaset_isdn_unregdrv() - unregister driver from LL |
| */ |
| void gigaset_isdn_unregdrv(void) |
| { |
| unregister_capi_driver(&capi_driver_gigaset); |
| } |