| /* |
| * |
| * tp3780i.c -- board driver for 3780i on ThinkPads |
| * |
| * |
| * Written By: Mike Sullivan IBM Corporation |
| * |
| * Copyright (C) 1999 IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| * |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * |
| * 10/23/2000 - Alpha Release |
| * First release to the public |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <asm/io.h> |
| #include "smapi.h" |
| #include "mwavedd.h" |
| #include "tp3780i.h" |
| #include "3780i.h" |
| #include "mwavepub.h" |
| |
| static unsigned short s_ausThinkpadIrqToField[16] = |
| { 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004, |
| 0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 }; |
| static unsigned short s_ausThinkpadDmaToField[8] = |
| { 0x0001, 0x0002, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0x0004 }; |
| static unsigned short s_numIrqs = 16, s_numDmas = 8; |
| |
| |
| static void EnableSRAM(THINKPAD_BD_DATA * pBDData) |
| { |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; |
| DSP_GPIO_OUTPUT_DATA_15_8 rGpioOutputData; |
| DSP_GPIO_DRIVER_ENABLE_15_8 rGpioDriverEnable; |
| DSP_GPIO_MODE_15_8 rGpioMode; |
| |
| PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM, entry\n"); |
| |
| MKWORD(rGpioMode) = ReadMsaCfg(DSP_GpioModeControl_15_8); |
| rGpioMode.GpioMode10 = 0; |
| WriteMsaCfg(DSP_GpioModeControl_15_8, MKWORD(rGpioMode)); |
| |
| MKWORD(rGpioDriverEnable) = 0; |
| rGpioDriverEnable.Enable10 = TRUE; |
| rGpioDriverEnable.Mask10 = TRUE; |
| WriteMsaCfg(DSP_GpioDriverEnable_15_8, MKWORD(rGpioDriverEnable)); |
| |
| MKWORD(rGpioOutputData) = 0; |
| rGpioOutputData.Latch10 = 0; |
| rGpioOutputData.Mask10 = TRUE; |
| WriteMsaCfg(DSP_GpioOutputData_15_8, MKWORD(rGpioOutputData)); |
| |
| PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM exit\n"); |
| } |
| |
| |
| static irqreturn_t UartInterrupt(int irq, void *dev_id) |
| { |
| PRINTK_3(TRACE_TP3780I, |
| "tp3780i::UartInterrupt entry irq %x dev_id %p\n", irq, dev_id); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t DspInterrupt(int irq, void *dev_id) |
| { |
| pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pDrvData->rBDData.rDspSettings; |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; |
| unsigned short usIPCSource = 0, usIsolationMask, usPCNum; |
| |
| PRINTK_3(TRACE_TP3780I, |
| "tp3780i::DspInterrupt entry irq %x dev_id %p\n", irq, dev_id); |
| |
| if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) { |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::DspInterrupt, return from dsp3780i_GetIPCSource, usIPCSource %x\n", |
| usIPCSource); |
| usIsolationMask = 1; |
| for (usPCNum = 1; usPCNum <= 16; usPCNum++) { |
| if (usIPCSource & usIsolationMask) { |
| usIPCSource &= ~usIsolationMask; |
| PRINTK_3(TRACE_TP3780I, |
| "tp3780i::DspInterrupt usPCNum %x usIPCSource %x\n", |
| usPCNum, usIPCSource); |
| if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) { |
| pDrvData->IPCs[usPCNum - 1].usIntCount = 1; |
| } |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::DspInterrupt usIntCount %x\n", |
| pDrvData->IPCs[usPCNum - 1].usIntCount); |
| if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == TRUE) { |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::DspInterrupt, waking up usPCNum %x\n", |
| usPCNum - 1); |
| wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue); |
| } else { |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::DspInterrupt, no one waiting for IPC %x\n", |
| usPCNum - 1); |
| } |
| } |
| if (usIPCSource == 0) |
| break; |
| /* try next IPC */ |
| usIsolationMask = usIsolationMask << 1; |
| } |
| } else { |
| PRINTK_1(TRACE_TP3780I, |
| "tp3780i::DspInterrupt, return false from dsp3780i_GetIPCSource\n"); |
| } |
| PRINTK_1(TRACE_TP3780I, "tp3780i::DspInterrupt exit\n"); |
| return IRQ_HANDLED; |
| } |
| |
| |
| int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData entry pBDData %p\n", pBDData); |
| |
| pBDData->bDSPEnabled = FALSE; |
| pSettings->bInterruptClaimed = FALSE; |
| |
| retval = smapi_init(); |
| if (retval) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine\n"); |
| } else { |
| if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) { |
| retval = smapi_set_DSP_cfg(); |
| } |
| } |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_Cleanup entry and exit pBDData %p\n", pBDData); |
| |
| return retval; |
| } |
| |
| int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData) |
| { |
| SMAPI_DSP_SETTINGS rSmapiInfo; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_CalcResources entry pBDData %p\n", pBDData); |
| |
| if (smapi_query_DSP_cfg(&rSmapiInfo)) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.\n"); |
| return -EIO; |
| } |
| |
| /* Sanity check */ |
| if ( |
| ( rSmapiInfo.usDspIRQ == 0 ) |
| || ( rSmapiInfo.usDspBaseIO == 0 ) |
| || ( rSmapiInfo.usUartIRQ == 0 ) |
| || ( rSmapiInfo.usUartBaseIO == 0 ) |
| ) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Illegal resource setting. Aborting.\n"); |
| return -EIO; |
| } |
| |
| pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent); |
| pSettings->bModemEnabled = rSmapiInfo.bModemEnabled; |
| pSettings->usDspIrq = rSmapiInfo.usDspIRQ; |
| pSettings->usDspDma = rSmapiInfo.usDspDMA; |
| pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO; |
| pSettings->usUartIrq = rSmapiInfo.usUartIRQ; |
| pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO; |
| |
| pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE; |
| pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE; |
| pSettings->uIps = TP_ABILITIES_INTS_PER_SEC; |
| |
| if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) { |
| pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1; |
| } else { |
| pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0; |
| } |
| |
| PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_CalcResources exit\n"); |
| |
| return 0; |
| } |
| |
| |
| int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| struct resource *pres; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_ClaimResources entry pBDData %p\n", pBDData); |
| |
| pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i"); |
| if ( pres == NULL ) retval = -EIO; |
| |
| if (retval) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_ClaimResources: Error: Could not claim I/O region starting at %x\n", pSettings->usDspBaseIO); |
| retval = -EIO; |
| } |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ClaimResources exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_ReleaseResources entry pBDData %p\n", pBDData); |
| |
| release_region(pSettings->usDspBaseIO & (~3), 16); |
| |
| if (pSettings->bInterruptClaimed) { |
| free_irq(pSettings->usDspIrq, NULL); |
| pSettings->bInterruptClaimed = FALSE; |
| } |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_ReleaseResources exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| |
| |
| int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData) |
| { |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| BOOLEAN bDSPPoweredUp = FALSE, bInterruptAllocated = FALSE; |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP entry pBDData %p\n", pBDData); |
| |
| if (pBDData->bDSPEnabled) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: DSP already enabled!\n"); |
| goto exit_cleanup; |
| } |
| |
| if (!pSettings->bDSPEnabled) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780::tp3780I_EnableDSP: Error: pSettings->bDSPEnabled not set\n"); |
| goto exit_cleanup; |
| } |
| |
| if ( |
| (pSettings->usDspIrq >= s_numIrqs) |
| || (pSettings->usDspDma >= s_numDmas) |
| || (s_ausThinkpadIrqToField[pSettings->usDspIrq] == 0xFFFF) |
| || (s_ausThinkpadDmaToField[pSettings->usDspDma] == 0xFFFF) |
| ) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: invalid irq %x\n", pSettings->usDspIrq); |
| goto exit_cleanup; |
| } |
| |
| if ( |
| ((pSettings->usDspBaseIO & 0xF00F) != 0) |
| || (pSettings->usDspBaseIO & 0x0FF0) == 0 |
| ) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid DSP base I/O address %x\n", pSettings->usDspBaseIO); |
| goto exit_cleanup; |
| } |
| |
| if (pSettings->bModemEnabled) { |
| if ( |
| pSettings->usUartIrq >= s_numIrqs |
| || s_ausThinkpadIrqToField[pSettings->usUartIrq] == 0xFFFF |
| ) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid UART IRQ %x\n", pSettings->usUartIrq); |
| goto exit_cleanup; |
| } |
| switch (pSettings->usUartBaseIO) { |
| case 0x03F8: |
| case 0x02F8: |
| case 0x03E8: |
| case 0x02E8: |
| break; |
| |
| default: |
| PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Invalid UART base I/O address %x\n", pSettings->usUartBaseIO); |
| goto exit_cleanup; |
| } |
| } |
| |
| pSettings->bDspIrqActiveLow = pSettings->bDspIrqPulse = TRUE; |
| pSettings->bUartIrqActiveLow = pSettings->bUartIrqPulse = TRUE; |
| |
| if (pBDData->bShareDspIrq) { |
| pSettings->bDspIrqActiveLow = FALSE; |
| } |
| if (pBDData->bShareUartIrq) { |
| pSettings->bUartIrqActiveLow = FALSE; |
| } |
| |
| pSettings->usNumTransfers = TP_CFG_NumTransfers; |
| pSettings->usReRequest = TP_CFG_RerequestTimer; |
| pSettings->bEnableMEMCS16 = TP_CFG_MEMCS16; |
| pSettings->usIsaMemCmdWidth = TP_CFG_IsaMemCmdWidth; |
| pSettings->bGateIOCHRDY = TP_CFG_GateIOCHRDY; |
| pSettings->bEnablePwrMgmt = TP_CFG_EnablePwrMgmt; |
| pSettings->usHBusTimerLoadValue = TP_CFG_HBusTimerValue; |
| pSettings->bDisableLBusTimeout = TP_CFG_DisableLBusTimeout; |
| pSettings->usN_Divisor = TP_CFG_N_Divisor; |
| pSettings->usM_Multiplier = TP_CFG_M_Multiplier; |
| pSettings->bPllBypass = TP_CFG_PllBypass; |
| pSettings->usChipletEnable = TP_CFG_ChipletEnable; |
| |
| if (request_irq(pSettings->usUartIrq, &UartInterrupt, 0, "mwave_uart", NULL)) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Could not get UART IRQ %x\n", pSettings->usUartIrq); |
| goto exit_cleanup; |
| } else { /* no conflict just release */ |
| free_irq(pSettings->usUartIrq, NULL); |
| } |
| |
| if (request_irq(pSettings->usDspIrq, &DspInterrupt, 0, "mwave_3780i", NULL)) { |
| PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Could not get 3780i IRQ %x\n", pSettings->usDspIrq); |
| goto exit_cleanup; |
| } else { |
| PRINTK_3(TRACE_TP3780I, |
| "tp3780i::tp3780I_EnableDSP, got interrupt %x bShareDspIrq %x\n", |
| pSettings->usDspIrq, pBDData->bShareDspIrq); |
| bInterruptAllocated = TRUE; |
| pSettings->bInterruptClaimed = TRUE; |
| } |
| |
| smapi_set_DSP_power_state(FALSE); |
| if (smapi_set_DSP_power_state(TRUE)) { |
| PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: smapi_set_DSP_power_state(TRUE) failed\n"); |
| goto exit_cleanup; |
| } else { |
| bDSPPoweredUp = TRUE; |
| } |
| |
| if (dsp3780I_EnableDSP(pSettings, s_ausThinkpadIrqToField, s_ausThinkpadDmaToField)) { |
| PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: dsp7880I_EnableDSP() failed\n"); |
| goto exit_cleanup; |
| } |
| |
| EnableSRAM(pBDData); |
| |
| pBDData->bDSPEnabled = TRUE; |
| |
| PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP exit\n"); |
| |
| return 0; |
| |
| exit_cleanup: |
| PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Cleaning up\n"); |
| if (bDSPPoweredUp) |
| smapi_set_DSP_power_state(FALSE); |
| if (bInterruptAllocated) { |
| free_irq(pSettings->usDspIrq, NULL); |
| pSettings->bInterruptClaimed = FALSE; |
| } |
| return -EIO; |
| } |
| |
| |
| int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP entry pBDData %p\n", pBDData); |
| |
| if (pBDData->bDSPEnabled) { |
| dsp3780I_DisableDSP(&pBDData->rDspSettings); |
| if (pSettings->bInterruptClaimed) { |
| free_irq(pSettings->usDspIrq, NULL); |
| pSettings->bInterruptClaimed = FALSE; |
| } |
| smapi_set_DSP_power_state(FALSE); |
| pBDData->bDSPEnabled = FALSE; |
| } |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| |
| int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP entry pBDData %p\n", |
| pBDData); |
| |
| if (dsp3780I_Reset(pSettings) == 0) { |
| EnableSRAM(pBDData); |
| } else { |
| retval = -EIO; |
| } |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| |
| int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP entry pBDData %p\n", pBDData); |
| |
| if (dsp3780I_Run(pSettings) == 0) { |
| // @BUG @TBD EnableSRAM(pBDData); |
| } else { |
| retval = -EIO; |
| } |
| |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| |
| int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities) |
| { |
| int retval = 0; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_QueryAbilities entry pBDData %p\n", pBDData); |
| |
| memset(pAbilities, 0, sizeof(*pAbilities)); |
| /* fill out standard constant fields */ |
| pAbilities->instr_per_sec = pBDData->rDspSettings.uIps; |
| pAbilities->data_size = pBDData->rDspSettings.uDStoreSize; |
| pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize; |
| pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth; |
| |
| /* fill out dynamically determined fields */ |
| pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK; |
| pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK; |
| pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK; |
| pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK; |
| pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK; |
| pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK; |
| pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK; |
| pAbilities->component_count = 7; |
| |
| /* Fill out Mwave OS and BIOS task names */ |
| |
| memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME, |
| sizeof(TP_ABILITIES_MWAVEOS_NAME)); |
| memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME, |
| sizeof(TP_ABILITIES_BIOSTASK_NAME)); |
| |
| PRINTK_1(TRACE_TP3780I, |
| "tp3780i::tp3780I_QueryAbilities exit retval=SUCCESSFUL\n"); |
| |
| return retval; |
| } |
| |
| int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, |
| void __user *pvBuffer, unsigned int uCount, |
| unsigned long ulDSPAddr) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; |
| BOOLEAN bRC = 0; |
| |
| PRINTK_6(TRACE_TP3780I, |
| "tp3780i::tp3780I_ReadWriteDspDStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n", |
| pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr); |
| |
| if (pBDData->bDSPEnabled) { |
| switch (uOpcode) { |
| case IOCTL_MW_READ_DATA: |
| bRC = dsp3780I_ReadDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); |
| break; |
| |
| case IOCTL_MW_READCLEAR_DATA: |
| bRC = dsp3780I_ReadAndClearDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); |
| break; |
| |
| case IOCTL_MW_WRITE_DATA: |
| bRC = dsp3780I_WriteDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); |
| break; |
| } |
| } |
| |
| retval = (bRC) ? -EIO : 0; |
| PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ReadWriteDspDStore exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |
| |
| int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, |
| void __user *pvBuffer, unsigned int uCount, |
| unsigned long ulDSPAddr) |
| { |
| int retval = 0; |
| DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; |
| BOOLEAN bRC = 0; |
| |
| PRINTK_6(TRACE_TP3780I, |
| "tp3780i::tp3780I_ReadWriteDspIStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n", |
| pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr); |
| |
| if (pBDData->bDSPEnabled) { |
| switch (uOpcode) { |
| case IOCTL_MW_READ_INST: |
| bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); |
| break; |
| |
| case IOCTL_MW_WRITE_INST: |
| bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); |
| break; |
| } |
| } |
| |
| retval = (bRC) ? -EIO : 0; |
| |
| PRINTK_2(TRACE_TP3780I, |
| "tp3780i::tp3780I_ReadWriteDspIStore exit retval %x\n", retval); |
| |
| return retval; |
| } |
| |