| # |
| # Accelerometer drivers |
| # |
| # When adding new entries keep the list in alphabetical order |
| |
| menu "Accelerometers" |
| |
| config BMA180 |
| tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build a driver for the Bosch BMA180 or |
| BMA250 triaxial acceleration sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bma180. |
| |
| config BMC150_ACCEL |
| tristate "Bosch BMC150 Accelerometer Driver" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP |
| select BMC150_ACCEL_I2C if I2C |
| select BMC150_ACCEL_SPI if SPI |
| help |
| Say yes here to build support for the following Bosch accelerometers: |
| BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. |
| |
| This is a combo module with both accelerometer and magnetometer. |
| This driver is only implementing accelerometer part, which has |
| its own address and register map. |
| |
| config BMC150_ACCEL_I2C |
| tristate |
| select REGMAP_I2C |
| |
| config BMC150_ACCEL_SPI |
| tristate |
| select REGMAP_SPI |
| |
| config HID_SENSOR_ACCEL_3D |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| tristate "HID Accelerometers 3D" |
| help |
| Say yes here to build support for the HID SENSOR |
| accelerometers 3D. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-sensor-accel-3d. |
| |
| config IIO_ST_ACCEL_3AXIS |
| tristate "STMicroelectronics accelerometers 3-Axis Driver" |
| depends on (I2C || SPI_MASTER) && SYSFS |
| select IIO_ST_SENSORS_CORE |
| select IIO_ST_ACCEL_I2C_3AXIS if (I2C) |
| select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) |
| help |
| Say yes here to build support for STMicroelectronics accelerometers: |
| LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, |
| LIS331DLH, LSM303DL, LSM303DLM, LSM330. |
| |
| This driver can also be built as a module. If so, these modules |
| will be created: |
| - st_accel (core functions for the driver [it is mandatory]); |
| - st_accel_i2c (necessary for the I2C devices [optional*]); |
| - st_accel_spi (necessary for the SPI devices [optional*]); |
| |
| (*) one of these is necessary to do something. |
| |
| config IIO_ST_ACCEL_I2C_3AXIS |
| tristate |
| depends on IIO_ST_ACCEL_3AXIS |
| depends on IIO_ST_SENSORS_I2C |
| |
| config IIO_ST_ACCEL_SPI_3AXIS |
| tristate |
| depends on IIO_ST_ACCEL_3AXIS |
| depends on IIO_ST_SENSORS_SPI |
| |
| config KXSD9 |
| tristate "Kionix KXSD9 Accelerometer Driver" |
| depends on SPI |
| help |
| Say yes here to build support for the Kionix KXSD9 accelerometer. |
| Currently this only supports the device via an SPI interface. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called kxsd9. |
| |
| config KXCJK1013 |
| tristate "Kionix 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build a driver for the Kionix KXCJK-1013 |
| triaxial acceleration sensor. This driver also supports KXCJ9-1008 |
| and KXTJ2-1009. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called kxcjk-1013. |
| |
| config MMA8452 |
| tristate "Freescale MMA8452Q and similar Accelerometers Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for the following Freescale 3-axis |
| accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma8452. |
| |
| config MMA9551_CORE |
| tristate |
| |
| config MMA9551 |
| tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" |
| depends on I2C |
| select MMA9551_CORE |
| |
| help |
| Say yes here to build support for the Freescale MMA9551L |
| Intelligent Motion-Sensing Platform Driver. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma9551. |
| |
| config MMA9553 |
| tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" |
| depends on I2C |
| select MMA9551_CORE |
| help |
| Say yes here to build support for the Freescale MMA9553L |
| Intelligent Pedometer Platform Driver. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma9553. |
| |
| config MXC4005 |
| tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the Memsic MXC4005XC 3-axis |
| accelerometer. |
| |
| To compile this driver as a module, choose M. The module will be |
| called mxc4005. |
| |
| config STK8312 |
| tristate "Sensortek STK8312 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to get support for the Sensortek STK8312 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called stk8312. |
| |
| config STK8BA50 |
| tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" |
| depends on I2C |
| depends on IIO_TRIGGER |
| help |
| Say yes here to get support for the Sensortek STK8BA50 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called stk8ba50. |
| |
| endmenu |
