| /* |
| * PCI support for Xilinx plbv46_pci soft-core which can be used on |
| * Xilinx Virtex ML410 / ML510 boards. |
| * |
| * Copyright 2009 Roderick Colenbrander |
| * Copyright 2009 Secret Lab Technologies Ltd. |
| * |
| * The pci bridge fixup code was copied from ppc4xx_pci.c and was written |
| * by Benjamin Herrenschmidt. |
| * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/ioport.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| |
| #define XPLB_PCI_ADDR 0x10c |
| #define XPLB_PCI_DATA 0x110 |
| #define XPLB_PCI_BUS 0x114 |
| |
| #define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \ |
| PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY) |
| |
| static struct of_device_id xilinx_pci_match[] = { |
| { .compatible = "xlnx,plbv46-pci-1.03.a", }, |
| {} |
| }; |
| |
| /** |
| * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration. |
| */ |
| static void xilinx_pci_fixup_bridge(struct pci_dev *dev) |
| { |
| struct pci_controller *hose; |
| int i; |
| |
| if (dev->devfn || dev->bus->self) |
| return; |
| |
| hose = pci_bus_to_host(dev->bus); |
| if (!hose) |
| return; |
| |
| if (!of_match_node(xilinx_pci_match, hose->dn)) |
| return; |
| |
| /* Hide the PCI host BARs from the kernel as their content doesn't |
| * fit well in the resource management |
| */ |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| dev->resource[i].start = 0; |
| dev->resource[i].end = 0; |
| dev->resource[i].flags = 0; |
| } |
| |
| dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n", |
| pci_name(dev)); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge); |
| |
| #ifdef DEBUG |
| /** |
| * xilinx_pci_exclude_device - Don't do config access for non-root bus |
| * |
| * This is a hack. Config access to any bus other than bus 0 does not |
| * currently work on the ML510 so we prevent it here. |
| */ |
| static int |
| xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) |
| { |
| return (bus != 0); |
| } |
| |
| /** |
| * xilinx_early_pci_scan - List pci config space for available devices |
| * |
| * List pci devices in very early phase. |
| */ |
| static void __init xilinx_early_pci_scan(struct pci_controller *hose) |
| { |
| u32 bus = 0; |
| u32 val, dev, func, offset; |
| |
| /* Currently we have only 2 device connected - up-to 32 devices */ |
| for (dev = 0; dev < 2; dev++) { |
| /* List only first function number - up-to 8 functions */ |
| for (func = 0; func < 1; func++) { |
| pr_info("%02x:%02x:%02x", bus, dev, func); |
| /* read the first 64 standardized bytes */ |
| /* Up-to 192 bytes can be list of capabilities */ |
| for (offset = 0; offset < 64; offset += 4) { |
| early_read_config_dword(hose, bus, |
| PCI_DEVFN(dev, func), offset, &val); |
| if (offset == 0 && val == 0xFFFFFFFF) { |
| pr_cont("\nABSENT"); |
| break; |
| } |
| if (!(offset % 0x10)) |
| pr_cont("\n%04x: ", offset); |
| |
| pr_cont("%08x ", val); |
| } |
| pr_info("\n"); |
| } |
| } |
| } |
| #else |
| static void __init xilinx_early_pci_scan(struct pci_controller *hose) |
| { |
| } |
| #endif |
| |
| /** |
| * xilinx_pci_init - Find and register a Xilinx PCI host bridge |
| */ |
| void __init xilinx_pci_init(void) |
| { |
| struct pci_controller *hose; |
| struct resource r; |
| void __iomem *pci_reg; |
| struct device_node *pci_node; |
| |
| pci_node = of_find_matching_node(NULL, xilinx_pci_match); |
| if (!pci_node) |
| return; |
| |
| if (of_address_to_resource(pci_node, 0, &r)) { |
| pr_err("xilinx-pci: cannot resolve base address\n"); |
| return; |
| } |
| |
| hose = pcibios_alloc_controller(pci_node); |
| if (!hose) { |
| pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); |
| return; |
| } |
| |
| /* Setup config space */ |
| setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, |
| r.start + XPLB_PCI_DATA, |
| INDIRECT_TYPE_SET_CFG_TYPE); |
| |
| /* According to the xilinx plbv46_pci documentation the soft-core starts |
| * a self-init when the bus master enable bit is set. Without this bit |
| * set the pci bus can't be scanned. |
| */ |
| early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD); |
| |
| /* Set the max latency timer to 255 */ |
| early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff); |
| |
| /* Set the max bus number to 255, and bus/subbus no's to 0 */ |
| pci_reg = of_iomap(pci_node, 0); |
| out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff); |
| iounmap(pci_reg); |
| |
| /* Register the host bridge with the linux kernel! */ |
| pci_process_bridge_OF_ranges(hose, pci_node, |
| INDIRECT_TYPE_SET_CFG_TYPE); |
| |
| pr_info("xilinx-pci: Registered PCI host bridge\n"); |
| xilinx_early_pci_scan(hose); |
| } |