| /* |
| * OnKey device driver for DA9063 and DA9062 PMICs |
| * Copyright (C) 2015 Dialog Semiconductor Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| #include <linux/regmap.h> |
| #include <linux/of.h> |
| #include <linux/mfd/da9063/core.h> |
| #include <linux/mfd/da9063/pdata.h> |
| #include <linux/mfd/da9063/registers.h> |
| #include <linux/mfd/da9062/core.h> |
| #include <linux/mfd/da9062/registers.h> |
| |
| struct da906x_chip_config { |
| /* REGS */ |
| int onkey_status; |
| int onkey_pwr_signalling; |
| int onkey_fault_log; |
| int onkey_shutdown; |
| /* MASKS */ |
| int onkey_nonkey_mask; |
| int onkey_nonkey_lock_mask; |
| int onkey_key_reset_mask; |
| int onkey_shutdown_mask; |
| /* NAMES */ |
| const char *name; |
| }; |
| |
| struct da9063_onkey { |
| struct delayed_work work; |
| struct input_dev *input; |
| struct device *dev; |
| struct regmap *regmap; |
| const struct da906x_chip_config *config; |
| char phys[32]; |
| bool key_power; |
| }; |
| |
| static const struct da906x_chip_config da9063_regs = { |
| /* REGS */ |
| .onkey_status = DA9063_REG_STATUS_A, |
| .onkey_pwr_signalling = DA9063_REG_CONTROL_B, |
| .onkey_fault_log = DA9063_REG_FAULT_LOG, |
| .onkey_shutdown = DA9063_REG_CONTROL_F, |
| /* MASKS */ |
| .onkey_nonkey_mask = DA9063_NONKEY, |
| .onkey_nonkey_lock_mask = DA9063_NONKEY_LOCK, |
| .onkey_key_reset_mask = DA9063_KEY_RESET, |
| .onkey_shutdown_mask = DA9063_SHUTDOWN, |
| /* NAMES */ |
| .name = DA9063_DRVNAME_ONKEY, |
| }; |
| |
| static const struct da906x_chip_config da9062_regs = { |
| /* REGS */ |
| .onkey_status = DA9062AA_STATUS_A, |
| .onkey_pwr_signalling = DA9062AA_CONTROL_B, |
| .onkey_fault_log = DA9062AA_FAULT_LOG, |
| .onkey_shutdown = DA9062AA_CONTROL_F, |
| /* MASKS */ |
| .onkey_nonkey_mask = DA9062AA_NONKEY_MASK, |
| .onkey_nonkey_lock_mask = DA9062AA_NONKEY_LOCK_MASK, |
| .onkey_key_reset_mask = DA9062AA_KEY_RESET_MASK, |
| .onkey_shutdown_mask = DA9062AA_SHUTDOWN_MASK, |
| /* NAMES */ |
| .name = "da9062-onkey", |
| }; |
| |
| static const struct of_device_id da9063_compatible_reg_id_table[] = { |
| { .compatible = "dlg,da9063-onkey", .data = &da9063_regs }, |
| { .compatible = "dlg,da9062-onkey", .data = &da9062_regs }, |
| { }, |
| }; |
| |
| static void da9063_poll_on(struct work_struct *work) |
| { |
| struct da9063_onkey *onkey = container_of(work, |
| struct da9063_onkey, |
| work.work); |
| const struct da906x_chip_config *config = onkey->config; |
| unsigned int val; |
| int fault_log = 0; |
| bool poll = true; |
| int error; |
| |
| /* Poll to see when the pin is released */ |
| error = regmap_read(onkey->regmap, |
| config->onkey_status, |
| &val); |
| if (error) { |
| dev_err(onkey->dev, |
| "Failed to read ON status: %d\n", error); |
| goto err_poll; |
| } |
| |
| if (!(val & config->onkey_nonkey_mask)) { |
| error = regmap_update_bits(onkey->regmap, |
| config->onkey_pwr_signalling, |
| config->onkey_nonkey_lock_mask, |
| 0); |
| if (error) { |
| dev_err(onkey->dev, |
| "Failed to reset the Key Delay %d\n", error); |
| goto err_poll; |
| } |
| |
| input_report_key(onkey->input, KEY_POWER, 0); |
| input_sync(onkey->input); |
| |
| poll = false; |
| } |
| |
| /* |
| * If the fault log KEY_RESET is detected, then clear it |
| * and shut down the system. |
| */ |
| error = regmap_read(onkey->regmap, |
| config->onkey_fault_log, |
| &fault_log); |
| if (error) { |
| dev_warn(&onkey->input->dev, |
| "Cannot read FAULT_LOG: %d\n", error); |
| } else if (fault_log & config->onkey_key_reset_mask) { |
| error = regmap_write(onkey->regmap, |
| config->onkey_fault_log, |
| config->onkey_key_reset_mask); |
| if (error) { |
| dev_warn(&onkey->input->dev, |
| "Cannot reset KEY_RESET fault log: %d\n", |
| error); |
| } else { |
| /* at this point we do any S/W housekeeping |
| * and then send shutdown command |
| */ |
| dev_dbg(&onkey->input->dev, |
| "Sending SHUTDOWN to DA9063 ...\n"); |
| error = regmap_write(onkey->regmap, |
| config->onkey_shutdown, |
| config->onkey_shutdown_mask); |
| if (error) |
| dev_err(&onkey->input->dev, |
| "Cannot SHUTDOWN DA9063: %d\n", |
| error); |
| } |
| } |
| |
| err_poll: |
| if (poll) |
| schedule_delayed_work(&onkey->work, msecs_to_jiffies(50)); |
| } |
| |
| static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) |
| { |
| struct da9063_onkey *onkey = data; |
| const struct da906x_chip_config *config = onkey->config; |
| unsigned int val; |
| int error; |
| |
| error = regmap_read(onkey->regmap, |
| config->onkey_status, |
| &val); |
| if (onkey->key_power && !error && (val & config->onkey_nonkey_mask)) { |
| input_report_key(onkey->input, KEY_POWER, 1); |
| input_sync(onkey->input); |
| schedule_delayed_work(&onkey->work, 0); |
| dev_dbg(onkey->dev, "KEY_POWER pressed.\n"); |
| } else { |
| input_report_key(onkey->input, KEY_SLEEP, 1); |
| input_sync(onkey->input); |
| input_report_key(onkey->input, KEY_SLEEP, 0); |
| input_sync(onkey->input); |
| dev_dbg(onkey->dev, "KEY_SLEEP pressed.\n"); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void da9063_cancel_poll(void *data) |
| { |
| struct da9063_onkey *onkey = data; |
| |
| cancel_delayed_work_sync(&onkey->work); |
| } |
| |
| static int da9063_onkey_probe(struct platform_device *pdev) |
| { |
| struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent); |
| struct da9063_pdata *pdata = dev_get_platdata(da9063->dev); |
| struct da9063_onkey *onkey; |
| const struct of_device_id *match; |
| int irq; |
| int error; |
| |
| match = of_match_node(da9063_compatible_reg_id_table, |
| pdev->dev.of_node); |
| if (!match) |
| return -ENXIO; |
| |
| onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey), |
| GFP_KERNEL); |
| if (!onkey) { |
| dev_err(&pdev->dev, "Failed to allocate memory.\n"); |
| return -ENOMEM; |
| } |
| |
| onkey->config = match->data; |
| onkey->dev = &pdev->dev; |
| |
| onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!onkey->regmap) { |
| dev_err(&pdev->dev, "Parent regmap unavailable.\n"); |
| return -ENXIO; |
| } |
| |
| if (pdata) |
| onkey->key_power = pdata->key_power; |
| else |
| onkey->key_power = |
| !of_property_read_bool(pdev->dev.of_node, |
| "dlg,disable-key-power"); |
| |
| onkey->input = devm_input_allocate_device(&pdev->dev); |
| if (!onkey->input) { |
| dev_err(&pdev->dev, "Failed to allocated input device.\n"); |
| return -ENOMEM; |
| } |
| |
| onkey->input->name = onkey->config->name; |
| snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0", |
| onkey->config->name); |
| onkey->input->phys = onkey->phys; |
| onkey->input->dev.parent = &pdev->dev; |
| |
| if (onkey->key_power) |
| input_set_capability(onkey->input, EV_KEY, KEY_POWER); |
| |
| input_set_capability(onkey->input, EV_KEY, KEY_SLEEP); |
| |
| INIT_DELAYED_WORK(&onkey->work, da9063_poll_on); |
| |
| error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey); |
| if (error) { |
| dev_err(&pdev->dev, |
| "Failed to add cancel poll action: %d\n", |
| error); |
| return error; |
| } |
| |
| irq = platform_get_irq_byname(pdev, "ONKEY"); |
| if (irq < 0) { |
| error = irq; |
| dev_err(&pdev->dev, "Failed to get platform IRQ: %d\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&pdev->dev, irq, |
| NULL, da9063_onkey_irq_handler, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "ONKEY", onkey); |
| if (error) { |
| dev_err(&pdev->dev, |
| "Failed to request IRQ %d: %d\n", irq, error); |
| return error; |
| } |
| |
| error = input_register_device(onkey->input); |
| if (error) { |
| dev_err(&pdev->dev, |
| "Failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| platform_set_drvdata(pdev, onkey); |
| return 0; |
| } |
| |
| static struct platform_driver da9063_onkey_driver = { |
| .probe = da9063_onkey_probe, |
| .driver = { |
| .name = DA9063_DRVNAME_ONKEY, |
| .of_match_table = da9063_compatible_reg_id_table, |
| }, |
| }; |
| module_platform_driver(da9063_onkey_driver); |
| |
| MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>"); |
| MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063 and DA9062"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY); |