| /* |
| * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC |
| * |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "dt-bindings/clock/pxa-clock.h" |
| |
| / { |
| model = "Marvell PXA2xx family SoC"; |
| compatible = "marvell,pxa2xx"; |
| interrupt-parent = <&pxairq>; |
| |
| aliases { |
| serial0 = &ffuart; |
| serial1 = &btuart; |
| serial2 = &stuart; |
| serial3 = &hwuart; |
| i2c0 = &pwri2c; |
| i2c1 = &pxai2c1; |
| }; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| cpu { |
| compatible = "marvell,xscale"; |
| device_type = "cpu"; |
| }; |
| }; |
| |
| pxabus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pxairq: interrupt-controller@40d00000 { |
| #interrupt-cells = <1>; |
| compatible = "marvell,pxa-intc"; |
| interrupt-controller; |
| interrupt-parent; |
| marvell,intc-nr-irqs = <32>; |
| reg = <0x40d00000 0xd0>; |
| }; |
| |
| gpio: gpio@40e00000 { |
| compatible = "mrvl,pxa-gpio"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0x40e00000 0x10000>; |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| interrupts = <10>; |
| interrupt-names = "gpio_mux"; |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| ranges; |
| |
| gcb0: gpio@40e00000 { |
| reg = <0x40e00000 0x4>; |
| }; |
| |
| gcb1: gpio@40e00004 { |
| reg = <0x40e00004 0x4>; |
| }; |
| |
| gcb2: gpio@40e00008 { |
| reg = <0x40e00008 0x4>; |
| }; |
| gcb3: gpio@40e0000c { |
| reg = <0x40e0000c 0x4>; |
| }; |
| }; |
| |
| ffuart: uart@40100000 { |
| compatible = "mrvl,pxa-uart"; |
| reg = <0x40100000 0x30>; |
| interrupts = <22>; |
| clocks = <&clks CLK_FFUART>; |
| status = "disabled"; |
| }; |
| |
| btuart: uart@40200000 { |
| compatible = "mrvl,pxa-uart"; |
| reg = <0x40200000 0x30>; |
| interrupts = <21>; |
| clocks = <&clks CLK_BTUART>; |
| status = "disabled"; |
| }; |
| |
| stuart: uart@40700000 { |
| compatible = "mrvl,pxa-uart"; |
| reg = <0x40700000 0x30>; |
| interrupts = <20>; |
| clocks = <&clks CLK_STUART>; |
| status = "disabled"; |
| }; |
| |
| hwuart: uart@41100000 { |
| compatible = "mrvl,pxa-uart"; |
| reg = <0x41100000 0x30>; |
| interrupts = <7>; |
| status = "disabled"; |
| }; |
| |
| pxai2c1: i2c@40301680 { |
| compatible = "mrvl,pxa-i2c"; |
| reg = <0x40301680 0x30>; |
| interrupts = <18>; |
| clocks = <&clks CLK_I2C>; |
| #address-cells = <0x1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb0: ohci@4c000000 { |
| compatible = "marvell,pxa-ohci"; |
| reg = <0x4c000000 0x10000>; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@41100000 { |
| compatible = "marvell,pxa-mmc"; |
| reg = <0x41100000 0x1000>; |
| interrupts = <23>; |
| clocks = <&clks CLK_MMC>; |
| dmas = <&pdma 21 3 |
| &pdma 22 3>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| rtc@40900000 { |
| compatible = "marvell,pxa-rtc"; |
| reg = <0x40900000 0x3c>; |
| interrupts = <30 31>; |
| }; |
| }; |
| }; |
