| /* |
| * Device Tree Source for OMAP2 SoC |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pinctrl/omap.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; |
| interrupt-parent = <&intc>; |
| |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| }; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| compatible = "arm,arm1136jf-s"; |
| device_type = "cpu"; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,arm1136-pmu"; |
| interrupts = <3>; |
| }; |
| |
| soc { |
| compatible = "ti,omap-infra"; |
| mpu { |
| compatible = "ti,omap2-mpu"; |
| ti,hwmods = "mpu"; |
| }; |
| }; |
| |
| ocp { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| ti,hwmods = "l3_main"; |
| |
| aes: aes@480a6000 { |
| compatible = "ti,omap2-aes"; |
| ti,hwmods = "aes"; |
| reg = <0x480a6000 0x50>; |
| dmas = <&sdma 9 &sdma 10>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| hdq1w: 1w@480b2000 { |
| compatible = "ti,omap2420-1w"; |
| ti,hwmods = "hdq1w"; |
| reg = <0x480b2000 0x1000>; |
| interrupts = <58>; |
| }; |
| |
| intc: interrupt-controller@1 { |
| compatible = "ti,omap2-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x480FE000 0x1000>; |
| }; |
| |
| sdma: dma-controller@48056000 { |
| compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; |
| ti,hwmods = "dma"; |
| reg = <0x48056000 0x1000>; |
| interrupts = <12>, |
| <13>, |
| <14>, |
| <15>; |
| #dma-cells = <1>; |
| dma-channels = <32>; |
| dma-requests = <64>; |
| }; |
| |
| i2c1: i2c@48070000 { |
| compatible = "ti,omap2-i2c"; |
| ti,hwmods = "i2c1"; |
| reg = <0x48070000 0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <56>; |
| dmas = <&sdma 27 &sdma 28>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| i2c2: i2c@48072000 { |
| compatible = "ti,omap2-i2c"; |
| ti,hwmods = "i2c2"; |
| reg = <0x48072000 0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <57>; |
| dmas = <&sdma 29 &sdma 30>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| mcspi1: mcspi@48098000 { |
| compatible = "ti,omap2-mcspi"; |
| ti,hwmods = "mcspi1"; |
| reg = <0x48098000 0x100>; |
| interrupts = <65>; |
| dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 |
| &sdma 39 &sdma 40 &sdma 41 &sdma 42>; |
| dma-names = "tx0", "rx0", "tx1", "rx1", |
| "tx2", "rx2", "tx3", "rx3"; |
| }; |
| |
| mcspi2: mcspi@4809a000 { |
| compatible = "ti,omap2-mcspi"; |
| ti,hwmods = "mcspi2"; |
| reg = <0x4809a000 0x100>; |
| interrupts = <66>; |
| dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; |
| dma-names = "tx0", "rx0", "tx1", "rx1"; |
| }; |
| |
| rng: rng@480a0000 { |
| compatible = "ti,omap2-rng"; |
| ti,hwmods = "rng"; |
| reg = <0x480a0000 0x50>; |
| interrupts = <52>; |
| }; |
| |
| sham: sham@480a4000 { |
| compatible = "ti,omap2-sham"; |
| ti,hwmods = "sham"; |
| reg = <0x480a4000 0x64>; |
| interrupts = <51>; |
| dmas = <&sdma 13>; |
| dma-names = "rx"; |
| }; |
| |
| uart1: serial@4806a000 { |
| compatible = "ti,omap2-uart"; |
| ti,hwmods = "uart1"; |
| reg = <0x4806a000 0x2000>; |
| interrupts = <72>; |
| dmas = <&sdma 49 &sdma 50>; |
| dma-names = "tx", "rx"; |
| clock-frequency = <48000000>; |
| }; |
| |
| uart2: serial@4806c000 { |
| compatible = "ti,omap2-uart"; |
| ti,hwmods = "uart2"; |
| reg = <0x4806c000 0x400>; |
| interrupts = <73>; |
| dmas = <&sdma 51 &sdma 52>; |
| dma-names = "tx", "rx"; |
| clock-frequency = <48000000>; |
| }; |
| |
| uart3: serial@4806e000 { |
| compatible = "ti,omap2-uart"; |
| ti,hwmods = "uart3"; |
| reg = <0x4806e000 0x400>; |
| interrupts = <74>; |
| dmas = <&sdma 53 &sdma 54>; |
| dma-names = "tx", "rx"; |
| clock-frequency = <48000000>; |
| }; |
| |
| timer2: timer@4802a000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x4802a000 0x400>; |
| interrupts = <38>; |
| ti,hwmods = "timer2"; |
| }; |
| |
| timer3: timer@48078000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48078000 0x400>; |
| interrupts = <39>; |
| ti,hwmods = "timer3"; |
| }; |
| |
| timer4: timer@4807a000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x4807a000 0x400>; |
| interrupts = <40>; |
| ti,hwmods = "timer4"; |
| }; |
| |
| timer5: timer@4807c000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x4807c000 0x400>; |
| interrupts = <41>; |
| ti,hwmods = "timer5"; |
| ti,timer-dsp; |
| }; |
| |
| timer6: timer@4807e000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x4807e000 0x400>; |
| interrupts = <42>; |
| ti,hwmods = "timer6"; |
| ti,timer-dsp; |
| }; |
| |
| timer7: timer@48080000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48080000 0x400>; |
| interrupts = <43>; |
| ti,hwmods = "timer7"; |
| ti,timer-dsp; |
| }; |
| |
| timer8: timer@48082000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48082000 0x400>; |
| interrupts = <44>; |
| ti,hwmods = "timer8"; |
| ti,timer-dsp; |
| }; |
| |
| timer9: timer@48084000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48084000 0x400>; |
| interrupts = <45>; |
| ti,hwmods = "timer9"; |
| ti,timer-pwm; |
| }; |
| |
| timer10: timer@48086000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48086000 0x400>; |
| interrupts = <46>; |
| ti,hwmods = "timer10"; |
| ti,timer-pwm; |
| }; |
| |
| timer11: timer@48088000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x48088000 0x400>; |
| interrupts = <47>; |
| ti,hwmods = "timer11"; |
| ti,timer-pwm; |
| }; |
| |
| timer12: timer@4808a000 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0x4808a000 0x400>; |
| interrupts = <48>; |
| ti,hwmods = "timer12"; |
| ti,timer-pwm; |
| }; |
| |
| dss: dss@48050000 { |
| compatible = "ti,omap2-dss"; |
| reg = <0x48050000 0x400>; |
| status = "disabled"; |
| ti,hwmods = "dss_core"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dispc@48050400 { |
| compatible = "ti,omap2-dispc"; |
| reg = <0x48050400 0x400>; |
| interrupts = <25>; |
| ti,hwmods = "dss_dispc"; |
| }; |
| |
| rfbi: encoder@48050800 { |
| compatible = "ti,omap2-rfbi"; |
| reg = <0x48050800 0x400>; |
| status = "disabled"; |
| ti,hwmods = "dss_rfbi"; |
| }; |
| |
| venc: encoder@48050c00 { |
| compatible = "ti,omap2-venc"; |
| reg = <0x48050c00 0x400>; |
| status = "disabled"; |
| ti,hwmods = "dss_venc"; |
| }; |
| }; |
| }; |
| }; |
