| * Renesas Clock Pulse Generator / Module Standby and Software Reset |
| |
| On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) |
| and MSSR (Module Standby and Software Reset) blocks are intimately connected, |
| and share the same register block. |
| |
| They provide the following functionalities: |
| - The CPG block generates various core clocks, |
| - The MSSR block provides two functions: |
| 1. Module Standby, providing a Clock Domain to control the clock supply |
| to individual SoC devices, |
| 2. Reset Control, to perform a software reset of individual SoC devices. |
| |
| Required Properties: |
| - compatible: Must be one of: |
| - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC |
| |
| - reg: Base address and length of the memory resource used by the CPG/MSSR |
| block |
| |
| - clocks: References to external parent clocks, one entry for each entry in |
| clock-names |
| - clock-names: List of external parent clock names. Valid names are: |
| - "extal" (r8a7795) |
| - "extalr" (r8a7795) |
| |
| - #clock-cells: Must be 2 |
| - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" |
| and a core clock reference, as defined in |
| <dt-bindings/clock/*-cpg-mssr.h>. |
| - For module clocks, the two clock specifier cells must be "CPG_MOD" and |
| a module number, as defined in the datasheet. |
| |
| - #power-domain-cells: Must be 0 |
| - SoC devices that are part of the CPG/MSSR Clock Domain and can be |
| power-managed through Module Standby should refer to the CPG device |
| node in their "power-domains" property, as documented by the generic PM |
| Domain bindings in |
| Documentation/devicetree/bindings/power/power_domain.txt. |
| |
| |
| Examples |
| -------- |
| |
| - CPG device node: |
| |
| cpg: clock-controller@e6150000 { |
| compatible = "renesas,r8a7795-cpg-mssr"; |
| reg = <0 0xe6150000 0 0x1000>; |
| clocks = <&extal_clk>, <&extalr_clk>; |
| clock-names = "extal", "extalr"; |
| #clock-cells = <2>; |
| #power-domain-cells = <0>; |
| }; |
| |
| |
| - CPG/MSSR Clock Domain member device node: |
| |
| scif2: serial@e6e88000 { |
| compatible = "renesas,scif-r8a7795", "renesas,scif"; |
| reg = <0 0xe6e88000 0 64>; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 310>; |
| clock-names = "sci_ick"; |
| dmas = <&dmac1 0x13>, <&dmac1 0x12>; |
| dma-names = "tx", "rx"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |