| /* |
| * RTC driver for the Micro Crystal RV8803 |
| * |
| * Copyright (C) 2015 Micro Crystal SA |
| * |
| * Alexandre Belloni <alexandre.belloni@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/bitops.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| |
| #define RV8803_SEC 0x00 |
| #define RV8803_MIN 0x01 |
| #define RV8803_HOUR 0x02 |
| #define RV8803_WEEK 0x03 |
| #define RV8803_DAY 0x04 |
| #define RV8803_MONTH 0x05 |
| #define RV8803_YEAR 0x06 |
| #define RV8803_RAM 0x07 |
| #define RV8803_ALARM_MIN 0x08 |
| #define RV8803_ALARM_HOUR 0x09 |
| #define RV8803_ALARM_WEEK_OR_DAY 0x0A |
| #define RV8803_EXT 0x0D |
| #define RV8803_FLAG 0x0E |
| #define RV8803_CTRL 0x0F |
| |
| #define RV8803_EXT_WADA BIT(6) |
| |
| #define RV8803_FLAG_V1F BIT(0) |
| #define RV8803_FLAG_V2F BIT(1) |
| #define RV8803_FLAG_AF BIT(3) |
| #define RV8803_FLAG_TF BIT(4) |
| #define RV8803_FLAG_UF BIT(5) |
| |
| #define RV8803_CTRL_RESET BIT(0) |
| |
| #define RV8803_CTRL_EIE BIT(2) |
| #define RV8803_CTRL_AIE BIT(3) |
| #define RV8803_CTRL_TIE BIT(4) |
| #define RV8803_CTRL_UIE BIT(5) |
| |
| struct rv8803_data { |
| struct i2c_client *client; |
| struct rtc_device *rtc; |
| spinlock_t flags_lock; |
| u8 ctrl; |
| }; |
| |
| static irqreturn_t rv8803_handle_irq(int irq, void *dev_id) |
| { |
| struct i2c_client *client = dev_id; |
| struct rv8803_data *rv8803 = i2c_get_clientdata(client); |
| unsigned long events = 0; |
| u8 flags; |
| |
| spin_lock(&rv8803->flags_lock); |
| |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags <= 0) { |
| spin_unlock(&rv8803->flags_lock); |
| return IRQ_NONE; |
| } |
| |
| if (flags & RV8803_FLAG_V1F) |
| dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n"); |
| |
| if (flags & RV8803_FLAG_V2F) |
| dev_warn(&client->dev, "Voltage low, data loss detected.\n"); |
| |
| if (flags & RV8803_FLAG_TF) { |
| flags &= ~RV8803_FLAG_TF; |
| rv8803->ctrl &= ~RV8803_CTRL_TIE; |
| events |= RTC_PF; |
| } |
| |
| if (flags & RV8803_FLAG_AF) { |
| flags &= ~RV8803_FLAG_AF; |
| rv8803->ctrl &= ~RV8803_CTRL_AIE; |
| events |= RTC_AF; |
| } |
| |
| if (flags & RV8803_FLAG_UF) { |
| flags &= ~RV8803_FLAG_UF; |
| rv8803->ctrl &= ~RV8803_CTRL_UIE; |
| events |= RTC_UF; |
| } |
| |
| if (events) { |
| rtc_update_irq(rv8803->rtc, 1, events); |
| i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); |
| i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, |
| rv8803->ctrl); |
| } |
| |
| spin_unlock(&rv8803->flags_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int rv8803_get_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| u8 date1[7]; |
| u8 date2[7]; |
| u8 *date = date1; |
| int ret, flags; |
| |
| flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG); |
| if (flags < 0) |
| return flags; |
| |
| if (flags & RV8803_FLAG_V2F) { |
| dev_warn(dev, "Voltage low, data is invalid.\n"); |
| return -EINVAL; |
| } |
| |
| ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC, |
| 7, date); |
| if (ret != 7) |
| return ret < 0 ? ret : -EIO; |
| |
| if ((date1[RV8803_SEC] & 0x7f) == bin2bcd(59)) { |
| ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC, |
| 7, date2); |
| if (ret != 7) |
| return ret < 0 ? ret : -EIO; |
| |
| if ((date2[RV8803_SEC] & 0x7f) != bin2bcd(59)) |
| date = date2; |
| } |
| |
| tm->tm_sec = bcd2bin(date[RV8803_SEC] & 0x7f); |
| tm->tm_min = bcd2bin(date[RV8803_MIN] & 0x7f); |
| tm->tm_hour = bcd2bin(date[RV8803_HOUR] & 0x3f); |
| tm->tm_wday = ffs(date[RV8803_WEEK] & 0x7f); |
| tm->tm_mday = bcd2bin(date[RV8803_DAY] & 0x3f); |
| tm->tm_mon = bcd2bin(date[RV8803_MONTH] & 0x1f) - 1; |
| tm->tm_year = bcd2bin(date[RV8803_YEAR]) + 100; |
| |
| return rtc_valid_tm(tm); |
| } |
| |
| static int rv8803_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| u8 date[7]; |
| int flags, ret; |
| unsigned long irqflags; |
| |
| if ((tm->tm_year < 100) || (tm->tm_year > 199)) |
| return -EINVAL; |
| |
| date[RV8803_SEC] = bin2bcd(tm->tm_sec); |
| date[RV8803_MIN] = bin2bcd(tm->tm_min); |
| date[RV8803_HOUR] = bin2bcd(tm->tm_hour); |
| date[RV8803_WEEK] = 1 << (tm->tm_wday); |
| date[RV8803_DAY] = bin2bcd(tm->tm_mday); |
| date[RV8803_MONTH] = bin2bcd(tm->tm_mon + 1); |
| date[RV8803_YEAR] = bin2bcd(tm->tm_year - 100); |
| |
| ret = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_SEC, |
| 7, date); |
| if (ret < 0) |
| return ret; |
| |
| spin_lock_irqsave(&rv8803->flags_lock, irqflags); |
| |
| flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG); |
| if (flags < 0) { |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| return flags; |
| } |
| |
| ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, |
| flags & ~RV8803_FLAG_V2F); |
| |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| |
| return ret; |
| } |
| |
| static int rv8803_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| struct i2c_client *client = rv8803->client; |
| u8 alarmvals[3]; |
| int flags, ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(client, RV8803_ALARM_MIN, |
| 3, alarmvals); |
| if (ret != 3) |
| return ret < 0 ? ret : -EIO; |
| |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags < 0) |
| return flags; |
| |
| alrm->time.tm_sec = 0; |
| alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); |
| alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); |
| alrm->time.tm_wday = -1; |
| alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); |
| alrm->time.tm_mon = -1; |
| alrm->time.tm_year = -1; |
| |
| alrm->enabled = !!(rv8803->ctrl & RV8803_CTRL_AIE); |
| alrm->pending = (flags & RV8803_FLAG_AF) && alrm->enabled; |
| |
| return 0; |
| } |
| |
| static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| u8 alarmvals[3]; |
| u8 ctrl[2]; |
| int ret, err; |
| unsigned long irqflags; |
| |
| /* The alarm has no seconds, round up to nearest minute */ |
| if (alrm->time.tm_sec) { |
| time64_t alarm_time = rtc_tm_to_time64(&alrm->time); |
| |
| alarm_time += 60 - alrm->time.tm_sec; |
| rtc_time64_to_tm(alarm_time, &alrm->time); |
| } |
| |
| spin_lock_irqsave(&rv8803->flags_lock, irqflags); |
| |
| ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl); |
| if (ret != 2) { |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| return ret < 0 ? ret : -EIO; |
| } |
| |
| alarmvals[0] = bin2bcd(alrm->time.tm_min); |
| alarmvals[1] = bin2bcd(alrm->time.tm_hour); |
| alarmvals[2] = bin2bcd(alrm->time.tm_mday); |
| |
| if (rv8803->ctrl & (RV8803_CTRL_AIE | RV8803_CTRL_UIE)) { |
| rv8803->ctrl &= ~(RV8803_CTRL_AIE | RV8803_CTRL_UIE); |
| err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, |
| rv8803->ctrl); |
| if (err) { |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| return err; |
| } |
| } |
| |
| ctrl[1] &= ~RV8803_FLAG_AF; |
| err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]); |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| if (err) |
| return err; |
| |
| err = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_ALARM_MIN, |
| 3, alarmvals); |
| if (err) |
| return err; |
| |
| if (alrm->enabled) { |
| if (rv8803->rtc->uie_rtctimer.enabled) |
| rv8803->ctrl |= RV8803_CTRL_UIE; |
| if (rv8803->rtc->aie_timer.enabled) |
| rv8803->ctrl |= RV8803_CTRL_AIE; |
| |
| err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, |
| rv8803->ctrl); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| int ctrl, flags, err; |
| unsigned long irqflags; |
| |
| ctrl = rv8803->ctrl; |
| |
| if (enabled) { |
| if (rv8803->rtc->uie_rtctimer.enabled) |
| ctrl |= RV8803_CTRL_UIE; |
| if (rv8803->rtc->aie_timer.enabled) |
| ctrl |= RV8803_CTRL_AIE; |
| } else { |
| if (!rv8803->rtc->uie_rtctimer.enabled) |
| ctrl &= ~RV8803_CTRL_UIE; |
| if (!rv8803->rtc->aie_timer.enabled) |
| ctrl &= ~RV8803_CTRL_AIE; |
| } |
| |
| spin_lock_irqsave(&rv8803->flags_lock, irqflags); |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags < 0) { |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| return flags; |
| } |
| flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF); |
| err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| if (err) |
| return err; |
| |
| if (ctrl != rv8803->ctrl) { |
| rv8803->ctrl = ctrl; |
| err = i2c_smbus_write_byte_data(client, RV8803_CTRL, |
| rv8803->ctrl); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct rv8803_data *rv8803 = dev_get_drvdata(dev); |
| int flags, ret = 0; |
| unsigned long irqflags; |
| |
| switch (cmd) { |
| case RTC_VL_READ: |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags < 0) |
| return flags; |
| |
| if (flags & RV8803_FLAG_V1F) |
| dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n"); |
| |
| if (flags & RV8803_FLAG_V2F) |
| dev_warn(&client->dev, "Voltage low, data loss detected.\n"); |
| |
| flags &= RV8803_FLAG_V1F | RV8803_FLAG_V2F; |
| |
| if (copy_to_user((void __user *)arg, &flags, sizeof(int))) |
| return -EFAULT; |
| |
| return 0; |
| |
| case RTC_VL_CLR: |
| spin_lock_irqsave(&rv8803->flags_lock, irqflags); |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags < 0) { |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| return flags; |
| } |
| |
| flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F); |
| ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); |
| spin_unlock_irqrestore(&rv8803->flags_lock, irqflags); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static ssize_t rv8803_nvram_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, RV8803_RAM, buf[0]); |
| if (ret < 0) |
| return ret; |
| |
| return 1; |
| } |
| |
| static ssize_t rv8803_nvram_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(client, RV8803_RAM); |
| if (ret < 0) |
| return ret; |
| |
| buf[0] = ret; |
| |
| return 1; |
| } |
| |
| static struct bin_attribute rv8803_nvram_attr = { |
| .attr = { |
| .name = "nvram", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| .size = 1, |
| .read = rv8803_nvram_read, |
| .write = rv8803_nvram_write, |
| }; |
| |
| static struct rtc_class_ops rv8803_rtc_ops = { |
| .read_time = rv8803_get_time, |
| .set_time = rv8803_set_time, |
| .ioctl = rv8803_ioctl, |
| }; |
| |
| static int rv8803_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct rv8803_data *rv8803; |
| int err, flags; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_I2C_BLOCK)) { |
| dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n"); |
| return -EIO; |
| } |
| |
| rv8803 = devm_kzalloc(&client->dev, sizeof(struct rv8803_data), |
| GFP_KERNEL); |
| if (!rv8803) |
| return -ENOMEM; |
| |
| rv8803->client = client; |
| i2c_set_clientdata(client, rv8803); |
| |
| flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); |
| if (flags < 0) |
| return flags; |
| |
| if (flags & RV8803_FLAG_V1F) |
| dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n"); |
| |
| if (flags & RV8803_FLAG_V2F) |
| dev_warn(&client->dev, "Voltage low, data loss detected.\n"); |
| |
| if (flags & RV8803_FLAG_AF) |
| dev_warn(&client->dev, "An alarm maybe have been missed.\n"); |
| |
| if (client->irq > 0) { |
| err = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, rv8803_handle_irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "rv8803", client); |
| if (err) { |
| dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); |
| client->irq = 0; |
| } else { |
| rv8803_rtc_ops.read_alarm = rv8803_get_alarm; |
| rv8803_rtc_ops.set_alarm = rv8803_set_alarm; |
| rv8803_rtc_ops.alarm_irq_enable = rv8803_alarm_irq_enable; |
| } |
| } |
| |
| rv8803->rtc = devm_rtc_device_register(&client->dev, client->name, |
| &rv8803_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rv8803->rtc)) { |
| dev_err(&client->dev, "unable to register the class device\n"); |
| return PTR_ERR(rv8803->rtc); |
| } |
| |
| err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT, |
| RV8803_EXT_WADA); |
| if (err) |
| return err; |
| |
| err = device_create_bin_file(&client->dev, &rv8803_nvram_attr); |
| if (err) |
| return err; |
| |
| rv8803->rtc->max_user_freq = 1; |
| |
| return 0; |
| } |
| |
| static int rv8803_remove(struct i2c_client *client) |
| { |
| device_remove_bin_file(&client->dev, &rv8803_nvram_attr); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id rv8803_id[] = { |
| { "rv8803", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, rv8803_id); |
| |
| static struct i2c_driver rv8803_driver = { |
| .driver = { |
| .name = "rtc-rv8803", |
| }, |
| .probe = rv8803_probe, |
| .remove = rv8803_remove, |
| .id_table = rv8803_id, |
| }; |
| module_i2c_driver(rv8803_driver); |
| |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); |
| MODULE_DESCRIPTION("Micro Crystal RV8803 RTC driver"); |
| MODULE_LICENSE("GPL v2"); |