| <?xml version="1.0"?> |
| <cnfg> |
| <PON> |
| <!-- PON serial number - up to 8 symbols --> |
| <PON_serial_num>AABBCCDDEEFF</PON_serial_num> |
| <!-- PON serial source: 0 - xml, 1 - digit part is taken from MAC lower 4 bytes--> |
| <PON_serial_src>0</PON_serial_src> |
| <!-- PON password - up to 10 symbols --> |
| <PON_passwd>1234567890</PON_passwd> |
| <!-- PON SN disabled: 0 = FALSE, 1 = TRUE --> |
| <PON_dis_sn>0</PON_dis_sn> |
| <!-- gem reset on fiber disconnect: 0 = FALSE, 1 = TRUE --> |
| <PON_gem_reset>0</PON_gem_reset> |
| <!-- tcont reset on fiber disconnect: 0 = FALSE, 1 = TRUE --> |
| <PON_tcont_reset>1</PON_tcont_reset> |
| <!-- PON Dying Gasp polarity: 0 = low, 1 = high --> |
| <PON_DG_polarity>1</PON_DG_polarity> |
| <!-- PON XVR Burst Enable Polarity: 0 - high; 1 - low --> |
| <PON_XVR_burst_enable_polarity>1</PON_XVR_burst_enable_polarity> |
| <!-- PON XVR Polarity: 0 - high; 1 - low --> |
| <PON_XVR_polarity>1</PON_XVR_polarity> |
| <!-- P2P XVR burst enable polarity: 0 - high; 1 - low --> |
| <P2P_XVR_burst_enable_polarity>0</P2P_XVR_burst_enable_polarity> |
| <!-- P2P XVR Polarity: 0 - high; 1 - low --> |
| <P2P_XVR_polarity>0</P2P_XVR_polarity> |
| <!-- gem ports restore after return from State 7: 0 = FALSE, 1 = TRUE --> |
| <PON_gem_restore>1</PON_gem_restore> |
| <!-- Psa FEC Ind Bit Hyst: number of fram 1-4 --> |
| <PON_fec_hyst>1</PON_fec_hyst> |
| <!-- Coupling Mode: 0 = DC, 1 = AC --> |
| <PON_coupling_mode>1</PON_coupling_mode> |
| </PON> |
| |
| |
| </cnfg> |
| |