| # This file needs to be provided to the TFTP client when it requests the file |
| # "gfrg200-mfg/bootstrap". |
| # |
| # Boot strap script for manufacturing |
| # Phase 1: |
| # Pre-programmed barebox loads gfrg200-mfg/bootstrap and executes it. This |
| # script then turns on the red LED, upgrades the uloader and barebox, downloads |
| # gfrg200-mfg/pre-init and stores it in /env/bin/pre-init. |
| # |
| # Phase 1.5: |
| # New barebox boots up and executes /env/bin/pre-init which downloads and |
| # executes gfrg200-mfg/flash_image |
| # |
| # Phase 2: |
| # flash_image downloads and flashes the kernel and rootfs. It finally wipes the |
| # env partition to remove /env/bin/pre-init. |
| # |
| |
| echo "+++++++++++++++++++++++++++++++++++++++++" |
| echo "Manufacturing bootstrap script -- Phase 1" |
| echo " - Upgrading uloader and bootloader" |
| echo "+++++++++++++++++++++++++++++++++++++++++" |
| |
| # Turn on red LED |
| mw 0x90470000 0x0800e000 |
| |
| nor_parts="128k(uloader)ro,512k(loader0)ro,512k(loader1)ro,128k(env),2M(hnvram),8M(kernel),8M(initrd)" |
| nor_device="comcertoflash.0" |
| |
| delpart /dev/nor0.* |
| addpart /dev/nor0 $nor_parts |
| |
| # Download helper script |
| tftp gfrg200-mfg/failure || reset |
| |
| # Download and store a script named pre-init in /env/bin/. |
| # This script will download and flash the kernel and rootfs on the next reboot. |
| # How this works: The new boot loader will check for /env/bin/pre-init. If this |
| # file exist, it will execute it before it attempts to boot into Linux. |
| [ -d /env/bin ] || mkdir -p /env/bin |
| tftp gfrg200-mfg/pre-init /env/bin/pre-init || /failure || exit 1 |
| saveenv || /failure || exit 1 |
| |
| echo "Upgrading uloader and boot loader" |
| tftp gfrg200-mfg/uloader.bin || /failure || exit 1 |
| crc32 -f uloader.bin -v 0xe3a10461 || /failure || exit 1 |
| tftp gfrg200-mfg/barebox.bin || /failure || exit 1 |
| crc32 -f barebox.bin -v 0x9f6302df || /failure || exit 1 |
| |
| # The hush shell does not support functions which is why we have to duplicate |
| # code here. |
| erase /dev/nor0.uloader || /failure || exit 1 |
| cp uloader.bin /dev/nor0.uloader || /failure || exit 1 |
| crc32 -f uloader.bin -F /dev/nor0.uloader || /failure || exit 1 |
| |
| erase /dev/nor0.loader0 || /failure || exit 1 |
| cp barebox.bin /dev/nor0.loader0 || /failure || exit 1 |
| crc32 -f barebox.bin -F /dev/nor0.loader0 || /failure || exit 1 |
| |
| erase /dev/nor0.loader1 || /failure || exit 1 |
| cp barebox.bin /dev/nor0.loader1 || /failure || exit 1 |
| crc32 -f barebox.bin -F /dev/nor0.loader1 || /failure || exit 1 |
| |
| reset || /failure || exit 1 |
