| #!/bin/sh |
| |
| # use 'dhcp' to do dhcp in barebox and in kernel |
| # use 'none' if you want to skip kernel ip autoconfiguration |
| ip=dhcp |
| |
| # or set your networking parameters here |
| #eth0.ipaddr=a.b.c.d |
| #eth0.netmask=a.b.c.d |
| #eth0.gateway=a.b.c.d |
| #eth0.serverip=a.b.c.d |
| |
| # can be either 'nfs', 'tftp' or 'nor' |
| kernel_loc=tftp |
| # can be either 'net', 'nor' or 'initrd' |
| rootfs_loc=initrd |
| |
| # can be either 'jffs2' or 'ubifs' |
| rootfs_type=ubifs |
| rootfsimage=root.$rootfs_type |
| |
| # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo |
| #kernelimage_type=zimage |
| #kernelimage=zImage |
| kernelimage_type=uimage |
| kernelimage=uImage |
| #kernelimage_type=raw |
| #kernelimage=Image |
| #kernelimage_type=raw_lzo |
| #kernelimage=Image.lzo |
| |
| nfsroot="$eth0.serverip:/opt/work/busybox/arm9/rootfs_arm" |
| |
| nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)" |
| rootfs_mtdblock_nor=3 |
| |
| autoboot_timeout=3 |
| |
| bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0" |
| |
| # set a fancy prompt (if support is compiled in) |
| PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# " |
| |
