| #!/bin/sh |
| |
| # otg port mode : can be 'host' or 'device' |
| otg_mode="device" |
| |
| machine=eukrea-cpuimx25 |
| |
| # use 'dhcp' to do dhcp in barebox and in kernel |
| # use 'none' if you want to skip kernel ip autoconfiguration |
| ip=none |
| |
| # or set your networking parameters here |
| #eth0.ipaddr=a.b.c.d |
| #eth0.netmask=a.b.c.d |
| #eth0.gateway=a.b.c.d |
| #eth0.serverip=a.b.c.d |
| |
| # can be either 'nfs', 'tftp' or 'nand' |
| kernel_loc=nand |
| # can be either 'net', 'nand' or 'initrd' |
| rootfs_loc=nand |
| |
| # rootfs |
| rootfs_type=ubifs |
| rootfsimage=$machine/rootfs.$rootfs_type |
| |
| # kernel |
| kernelimage_type=uimage |
| kernelimage=$machine/uImage-${machine}.bin |
| |
| # barebox and it's env |
| bareboximage=$machine/barebox-${machine}.bin |
| bareboxenvimage=$machine/bareboxenv-${machine}.bin |
| |
| nfsroot="$eth0.serverip:/srv/nfs/$machine" |
| |
| autoboot_timeout=1 |
| |
| bootargs="console=ttymxc0,115200 otg_mode=$otg_mode" |
| |
| nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)" |
| rootfs_mtdblock_nand=3 |
| nand_device="mxc_nand" |
| ubiroot="$machine-rootfs" |
| device_type="nand" |
| |
| # set a fancy prompt (if support is compiled in) |
| PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m " |
