| #!/bin/sh |
| |
| # use 'dhcp' to do dhcp in barebox and in kernel |
| # use 'none' if you want to skip kernel ip autoconfiguration |
| ip=dhcp |
| |
| # or set your networking parameters here |
| #eth0.ipaddr=a.b.c.d |
| #eth0.netmask=a.b.c.d |
| #eth0.gateway=a.b.c.d |
| #eth0.serverip=a.b.c.d |
| |
| # can be either 'nfs', 'tftp', 'nor' or 'nand' |
| kernel_loc=tftp |
| # can be either 'net', 'nor', 'nand' or 'initrd' |
| rootfs_loc=net |
| |
| # can be either 'jffs2' or 'ubifs' |
| rootfs_type=ubifs |
| rootfsimage=root.$rootfs_type |
| |
| # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo |
| #kernelimage_type=zimage |
| #kernelimage=zImage |
| kernelimage_type=uimage |
| kernelimage=uImage |
| #kernelimage_type=raw |
| #kernelimage=Image |
| #kernelimage_type=raw_lzo |
| #kernelimage=Image.lzo |
| |
| nand_device=atmel_nand |
| nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)" |
| rootfs_mtdblock_nand=3 |
| |
| autoboot_timeout=3 |
| |
| bootargs="console=ttyS0,115200" |
| |
| # set a fancy prompt (if support is compiled in) |
| PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m " |
| |