blob: 23fc8016498a64c043124a07106c53867d3ab78b [file] [log] [blame]
/*
* profiles8-le88264_abs_zsi.c --
*
* This file contains profile data in byte format
*
* Project Info --
* File:
* Type: Line Module LE71HR1865 RevA PBX VBL Reg
* Date: Monday, March 07, 2011 08:40:06
* Device: VoicePort Le88264
*
* This file was generated with Profile Wizard Version: P2.0.0
*/
#include "profiles8-le88264_abs_zsi.h"
/************** Device Parameters **************/
/* Le88264 Power Optimized With Free Run */
const VpProfileDataType DEV_PROFILE_LE88264_ABS_ZSI[] =
{
/* Device Profile for VoicePort Device Family */
0x00, 0xFF, 0x00, 0x20, /* Profile Index and Length */
0x05, 0x00, /* Version and MPI Command */
0x08, 0x00, /* PCLK Frequency */
0x02, 0x00, /* Device Config 1, Battery Control Mode */
0x46, 0x02, /* Clock Slot and Max Events */
0x05, 0x00, /* Device Tickrate */
0xE4, 0x00, 0x04, 0x00, /* Switching Regulator Parameters */
0x1B, 0x05, /* Y-Voltage, Z-Voltage */
0x00, 0x00, 0x00, 0x00, /* RSVD */
0xB1, 0x00, 0xB1, 0x00, 0xB0, 0x40, /* Regulator Timing Parameters */
0x2C, 0x40, 0x2C, 0x40, 0x2C, 0x40 /* FreeRun Timing Parameters */
};
/************** AC Filter Coefficients **************/
/* AC FXS RF14 600 Coefficients */
const VpProfileDataType AC_PROFILE_LE88264_ABS_ZSI[] =
{
/* AC Profile */
0xA4, 0x00, 0xF4, 0x4C, 0x01, 0x49, 0xCA, 0xF5, 0x98, 0xAA, 0x7B, 0xAB,
0x2C, 0xA3, 0x25, 0xA5, 0x24, 0xB2, 0x3D, 0x9A, 0x2A, 0xAA, 0xA6, 0x9F,
0x01, 0x8A, 0x1D, 0x01, 0xA3, 0xA0, 0x2E, 0xB2, 0xB2, 0xBA, 0xAC, 0xA2,
0xA6, 0xCB, 0x3B, 0x45, 0x88, 0x2A, 0x20, 0x3C, 0xBC, 0x4E, 0xA6, 0x2B,
0xA5, 0x2B, 0x3E, 0xBA, 0x8F, 0x82, 0xA8, 0x71, 0x80, 0xA9, 0xF0, 0x50,
0x00, 0x86, 0x2A, 0x42, 0xA1, 0xCB, 0x1B, 0xA3, 0xA8, 0xFB, 0x87, 0xAA,
0xFB, 0x9F, 0xA9, 0xF0, 0x96, 0x2E, 0x01, 0x00
};
/************** DC Feed Parameters **************/
/* 25mA current feed */
const VpProfileDataType DC_PROFILE_LE88264_ABS_ZSI[] =
{
/* DC Profile */
0x00, 0x01, 0x01, 0x0B, 0x01, 0x08, 0xC2, 0x19, 0x84, 0xB0, 0x05, 0xC6,
0x11, 0x07, 0x01
};
/************** Ring Signal Parameters **************/
/* 20Hz, Sinewave ringing, 70Vpk */
const VpProfileDataType RING_PROFILE_LE88264_ABS_ZSI[] =
{
/* Sine, 20 Hz, 1.41 CF, 70.00 Vpk, 0.00 Bias */
/* Ringing Profile */
0x00, 0x04, 0x01, 0x12, 0x00, 0x0E, 0xD2, 0x00, 0x00, 0x00, 0x00, 0x37,
0x3A, 0x0A, 0x00, 0x00, 0x00, 0x00, 0x68, 0x01, 0x00, 0x00
};
/* 2 on 4 off */
const VpProfileDataType RING_CAD_LE88264_ABS_ZSI[] =
{
/* Cadence Profile */
0x00, 0x08, 0x01, 0x16, 0x00, 0x00, 0x00, 0x12, 0x01, 0x07, 0x21, 0x90,
0x01, 0x05, 0x02, 0x01, 0x23, 0x20, 0x01, 0x07, 0x21, 0x90, 0x01, 0x05,
0x44, 0x00
};
/* end of file profiles8-le88264_abs_zsi.c */