| #!/bin/sh |
| |
| # use 'dhcp' to do dhcp in barebox and in kernel |
| # use 'none' if you want to skip kernel ip autoconfiguration |
| ip=none |
| |
| # or set your networking parameters here |
| #eth0.ipaddr=192.168.2.22 |
| #eth0.netmask=255.255.255.0 |
| #eth0.serverip=192.168.2.10 |
| #eth0.gateway=192.168.2.1 |
| eth0.ethaddr=00:0A:0B:0C:0D:0E |
| eth1.ethaddr=00:1A:1B:1C:1D:1E |
| eth2.ethaddr=00:2A:2B:2C:2D:2E |
| |
| # can be either 'nfs', 'tftp' , 'nor' , 'nand' and 'sata' |
| #kernel_loc=nand |
| kernel_loc=nor |
| #kernel_loc=sata |
| # can be either 'net', 'nor' ,'initrd' , 'nand' and 'sata' |
| #rootfs_loc=nand |
| rootfs_loc=nor |
| #rootfs_loc=sata |
| |
| # barebox images |
| uloaderimage=microloader-c2kmfcnevm.bin |
| bareboximage=barebox-c2kmfcnevm.bin |
| |
| # can be either 'jffs2' , 'ubifs' or 'ext4 |
| #rootfs_type=jffs2 |
| rootfs_type=ubifs |
| #rootfs_type=ext4 |
| rootfsimage=root.$rootfs_type-128k |
| |
| # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo |
| kernelimage_type=uimage |
| kernelimage=uImage |
| |
| #nfsroot="$eth0.serverip:/opt/work/busybox/rootfs_arm" |
| |
| nand_device="comcertonand" |
| nand_parts="1024k(barebox)ro,1024k(bareboxenv),4M(kernel),-(rootfs)" |
| rootfs_mtdblock_nand=8 |
| |
| nor_parts="128k(uloader)ro,512k(barebox)ro,128k(env),4M(kernel),48M(rootfs)" |
| nor_device="comcertoflash.0" |
| rootfs_mtdblock_nor=4 |
| |
| autoboot_timeout=3 |
| |
| usb3_internal_clk="yes" |
| |
| bootargs="console=ttyS0,115200n8, init=/etc/preinit" |
| bootargs="$bootargs mac_addr=$eth0.ethaddr,$eth1.ethaddr,$eth2.ethaddr" |
| |
