blob: ddb005a89bce216e472291f8246046085b911ead [file] [log] [blame]
/*
* arch/arm/mach-at91/at91sam9263_devices.c
*
* Copyright (C) 2006 Atmel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <common.h>
#include <asm/armlinux.h>
#include <asm/hardware.h>
#include <mach/at91_pmc.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/io.h>
#include "generic.h"
static struct memory_platform_data ram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
};
static struct device_d sdram_dev = {
.id = -1,
.name = "mem",
.map_base = AT91_CHIPSELECT_6,
.platform_data = &ram_pdata,
};
void at91_add_device_sdram(u32 size)
{
sdram_dev.size = size;
register_device(&sdram_dev);
armlinux_add_dram(&sdram_dev);
}
#if defined(CONFIG_DRIVER_NET_MACB)
static struct device_d macb_dev = {
.id = 0,
.name = "macb",
.map_base = AT91SAM9G45_BASE_EMAC,
.size = 0x1000,
};
void at91_add_device_eth(struct at91_ether_platform_data *data)
{
if (!data)
return;
/* Pins used for MII and RMII */
at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
if (!(data->flags & AT91SAM_ETHER_RMII)) {
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
}
macb_dev.platform_data = data;
register_device(&macb_dev);
}
#else
void at91_add_device_eth(struct at91_ether_platform_data *data) {}
#endif
#if defined(CONFIG_NAND_ATMEL)
static struct device_d nand_dev = {
.id = -1,
.name = "atmel_nand",
.map_base = AT91_CHIPSELECT_3,
.size = 0x10,
};
void at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
if (!data)
return;
data->ecc_base = (void __iomem *)(AT91_BASE_SYS + AT91_ECC);
data->ecc_mode = NAND_ECC_HW;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
nand_dev.platform_data = data;
register_device(&nand_dev);
}
#else
void at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
static struct device_d dbgu_serial_device = {
.id = -1,
.name = "atmel_serial",
.map_base = (AT91_BASE_SYS + AT91_DBGU),
.size = 4096,
};
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
}
static struct device_d uart0_serial_device = {
.id = -1,
.name = "atmel_serial",
.map_base = AT91SAM9G45_BASE_US0,
.size = 4096,
};
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
}
static struct device_d uart1_serial_device = {
.id = -1,
.name = "atmel_serial",
.map_base = AT91SAM9G45_BASE_US1,
.size = 4096,
};
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
}
static struct device_d uart2_serial_device = {
.id = -1,
.name = "atmel_serial",
.map_base = AT91SAM9G45_BASE_US2,
.size = 4096,
};
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
}
static struct device_d uart3_serial_device = {
.id = -1,
.name = "atmel_serial",
.map_base = AT91SAM9G45_ID_US3,
.size = 4096,
};
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
}
void at91_register_uart(unsigned id, unsigned pins)
{
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
at91_clock_associate("mck", &dbgu_serial_device, "usart");
register_device(&dbgu_serial_device);
break;
case AT91SAM9G45_ID_US0:
configure_usart0_pins(pins);
at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
register_device(&uart0_serial_device);
break;
case AT91SAM9G45_ID_US1:
configure_usart1_pins(pins);
at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
register_device(&uart1_serial_device);
break;
case AT91SAM9G45_ID_US2:
configure_usart2_pins(pins);
at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
register_device(&uart2_serial_device);
break;
case AT91SAM9G45_ID_US3:
configure_usart3_pins(pins);
at91_clock_associate("usart3_clk", &uart2_serial_device, "usart");
register_device(&uart3_serial_device);
break;
default:
return;
}
}