blob: ad53043b7af42d7fc4f42687bd0a7951a2d6abb4 [file] [log] [blame]
This is /home/vagrant/rpmbuild/BUILD/build-eglibc/manual/libc.info,
produced by makeinfo version 4.13 from libc.texinfo.
INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc). C library.
END-INFO-DIR-ENTRY
INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DES_FAILED: (libc)DES Encryption.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* SV_INTERRUPT: (libc)BSD Handler.
* SV_ONSTACK: (libc)BSD Handler.
* SV_RESETHAND: (libc)BSD Handler.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying and Concatenation.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying and Concatenation.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* calloc: (libc)Allocating Cleared Space.
* canonicalize_file_name: (libc)Symbolic Links.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbc_crypt: (libc)DES Encryption.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfree: (libc)Freeing after Malloc.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)crypt.
* crypt_r: (libc)crypt.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* des_setparity: (libc)DES Encryption.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecb_crypt: (libc)DES Encryption.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* encrypt: (libc)DES Encryption.
* encrypt_r: (libc)DES Encryption.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexceptflag: (libc)Status bit operations.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying and Concatenation.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying and Concatenation.
* memfrob: (libc)Trivial Encryption.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying and Concatenation.
* mempcpy: (libc)Copying and Concatenation.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying and Concatenation.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* popen: (libc)Pipe to a Subprocess.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow10: (libc)Exponents and Logarithms.
* pow10f: (libc)Exponents and Logarithms.
* pow10l: (libc)Exponents and Logarithms.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setkey: (libc)DES Encryption.
* setkey_r: (libc)DES Encryption.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)Blocking in BSD.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Handler.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)Blocking in BSD.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)Blocking in BSD.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)Blocking in BSD.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sigvec: (libc)BSD Handler.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying and Concatenation.
* stpncpy: (libc)Copying and Concatenation.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Copying and Concatenation.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying and Concatenation.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying and Concatenation.
* strdupa: (libc)Copying and Concatenation.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfry: (libc)strfry.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Copying and Concatenation.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Copying and Concatenation.
* strndup: (libc)Copying and Concatenation.
* strndupa: (libc)Copying and Concatenation.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying and Concatenation.
* wcpncpy: (libc)Copying and Concatenation.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Copying and Concatenation.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying and Concatenation.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying and Concatenation.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Copying and Concatenation.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Copying and Concatenation.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying and Concatenation.
* wmemmove: (libc)Copying and Concatenation.
* wmempcpy: (libc)Copying and Concatenation.
* wmemset: (libc)Copying and Concatenation.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY
This file documents the GNU C Library.
This is `The GNU C Library Reference Manual', for version
2.18-2013.10 (EGLIBC).
Copyright (C) 1993-2013 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version
1.3 or any later version published by the Free Software Foundation;
with the Invariant Sections being "Free Software Needs Free
Documentation" and "GNU Lesser General Public License", the Front-Cover
texts being "A GNU Manual", and with the Back-Cover Texts as in (a)
below. A copy of the license is included in the section entitled "GNU
Free Documentation License".
(a) The FSF's Back-Cover Text is: "You have the freedom to copy and
modify this GNU manual. Buying copies from the FSF supports it in
developing GNU and promoting software freedom."

File: libc.info, Node: Function Index, Next: Variable Index, Prev: Type Index, Up: Top
Function and Macro Index
************************
�[index�]
* Menu:
* *sbrk: Resizing the Data Segment.
(line 44)
* __fbufsize: Controlling Buffering.
(line 116)
* __flbf: Controlling Buffering.
(line 106)
* __fpending: Controlling Buffering.
(line 123)
* __fpurge: Flushing Buffers. (line 65)
* __freadable: Opening Streams. (line 193)
* __freading: Opening Streams. (line 210)
* __fsetlocking: Streams and Threads. (line 161)
* __fwritable: Opening Streams. (line 200)
* __fwriting: Opening Streams. (line 220)
* __ppc_get_timebase: PowerPC. (line 10)
* __ppc_get_timebase_freq: PowerPC. (line 23)
* __ppc_mdoio: PowerPC. (line 43)
* __ppc_mdoom: PowerPC. (line 49)
* __ppc_set_ppr_low: PowerPC. (line 68)
* __ppc_set_ppr_med: PowerPC. (line 55)
* __ppc_set_ppr_med_low: PowerPC. (line 71)
* __ppc_yield: PowerPC. (line 38)
* __va_copy: Argument Macros. (line 47)
* _Exit: Termination Internals.
(line 15)
* _exit: Termination Internals.
(line 10)
* _flushlbf: Flushing Buffers. (line 47)
* _tolower: Case Conversion. (line 39)
* _toupper: Case Conversion. (line 43)
* a64l: Encode Binary Data. (line 83)
* abort: Aborting a Program. (line 10)
* abs: Absolute Value. (line 18)
* accept: Accepting Connections.
(line 27)
* access: Testing File Access. (line 42)
* acos: Inverse Trig Functions.
(line 23)
* acosf: Inverse Trig Functions.
(line 24)
* acosh: Hyperbolic Functions.
(line 58)
* acoshf: Hyperbolic Functions.
(line 59)
* acoshl: Hyperbolic Functions.
(line 60)
* acosl: Inverse Trig Functions.
(line 25)
* addmntent: mtab. (line 176)
* addseverity: Adding Severity Classes.
(line 13)
* adjtime: High-Resolution Calendar.
(line 88)
* adjtimex: High-Resolution Calendar.
(line 121)
* aio_cancel: Cancel AIO Operations.
(line 19)
* aio_cancel64: Cancel AIO Operations.
(line 63)
* aio_error: Status of AIO Operations.
(line 15)
* aio_error64: Status of AIO Operations.
(line 33)
* aio_fsync: Synchronizing AIO Operations.
(line 18)
* aio_fsync64: Synchronizing AIO Operations.
(line 65)
* aio_init: Configuration of AIO.
(line 47)
* aio_read: Asynchronous Reads/Writes.
(line 7)
* aio_read64: Asynchronous Reads/Writes.
(line 73)
* aio_return: Status of AIO Operations.
(line 43)
* aio_return64: Status of AIO Operations.
(line 63)
* aio_suspend: Synchronizing AIO Operations.
(line 89)
* aio_suspend64: Synchronizing AIO Operations.
(line 126)
* aio_write: Asynchronous Reads/Writes.
(line 89)
* aio_write64: Asynchronous Reads/Writes.
(line 155)
* alarm: Setting an Alarm. (line 103)
* alloca: Variable Size Automatic.
(line 19)
* alphasort: Scanning Directory Content.
(line 40)
* alphasort64: Scanning Directory Content.
(line 75)
* argp_error: Argp Helper Functions.
(line 18)
* argp_failure: Argp Helper Functions.
(line 25)
* argp_help: Argp Help. (line 16)
* argp_parse: Argp. (line 36)
* argp_state_help: Argp Helper Functions.
(line 39)
* argp_usage: Argp Helper Functions.
(line 12)
* argz_add: Argz Functions. (line 66)
* argz_add_sep: Argz Functions. (line 71)
* argz_append: Argz Functions. (line 79)
* argz_count: Argz Functions. (line 41)
* argz_create: Argz Functions. (line 28)
* argz_create_sep: Argz Functions. (line 35)
* argz_delete: Argz Functions. (line 85)
* argz_extract: Argz Functions. (line 46)
* argz_insert: Argz Functions. (line 94)
* argz_next: Argz Functions. (line 104)
* argz_replace: Argz Functions. (line 132)
* argz_stringify: Argz Functions. (line 59)
* asctime: Formatting Calendar Time.
(line 10)
* asctime_r: Formatting Calendar Time.
(line 28)
* asin: Inverse Trig Functions.
(line 11)
* asinf: Inverse Trig Functions.
(line 12)
* asinh: Hyperbolic Functions.
(line 52)
* asinhf: Hyperbolic Functions.
(line 53)
* asinhl: Hyperbolic Functions.
(line 54)
* asinl: Inverse Trig Functions.
(line 13)
* asprintf: Dynamic Output. (line 10)
* assert: Consistency Checking.
(line 27)
* assert_perror: Consistency Checking.
(line 59)
* atan: Inverse Trig Functions.
(line 35)
* atan2: Inverse Trig Functions.
(line 44)
* atan2f: Inverse Trig Functions.
(line 45)
* atan2l: Inverse Trig Functions.
(line 46)
* atanf: Inverse Trig Functions.
(line 36)
* atanh: Hyperbolic Functions.
(line 65)
* atanhf: Hyperbolic Functions.
(line 66)
* atanhl: Hyperbolic Functions.
(line 67)
* atanl: Inverse Trig Functions.
(line 37)
* atexit: Cleanups on Exit. (line 15)
* atof: Parsing of Floats. (line 104)
* atoi: Parsing of Integers. (line 196)
* atol: Parsing of Integers. (line 190)
* atoll: Parsing of Integers. (line 201)
* backtrace: Backtraces. (line 16)
* backtrace_symbols: Backtraces. (line 35)
* backtrace_symbols_fd: Backtraces. (line 65)
* basename: Finding Tokens in a String.
(line 202)
* bcmp: String/Array Comparison.
(line 220)
* bcopy: Copying and Concatenation.
(line 628)
* bind: Setting Address. (line 13)
* bind_textdomain_codeset: Charset conversion in gettext.
(line 28)
* bindtextdomain: Locating gettext catalog.
(line 100)
* brk: Resizing the Data Segment.
(line 15)
* bsearch: Array Search Function.
(line 49)
* btowc: Converting a Character.
(line 16)
* bzero: Copying and Concatenation.
(line 634)
* cabs: Absolute Value. (line 39)
* cabsf: Absolute Value. (line 40)
* cabsl: Absolute Value. (line 41)
* cacos: Inverse Trig Functions.
(line 72)
* cacosf: Inverse Trig Functions.
(line 73)
* cacosh: Hyperbolic Functions.
(line 79)
* cacoshf: Hyperbolic Functions.
(line 80)
* cacoshl: Hyperbolic Functions.
(line 81)
* cacosl: Inverse Trig Functions.
(line 74)
* calloc: Allocating Cleared Space.
(line 10)
* canonicalize_file_name: Symbolic Links. (line 121)
* carg: Operations on Complex.
(line 29)
* cargf: Operations on Complex.
(line 30)
* cargl: Operations on Complex.
(line 31)
* casin: Inverse Trig Functions.
(line 63)
* casinf: Inverse Trig Functions.
(line 64)
* casinh: Hyperbolic Functions.
(line 73)
* casinhf: Hyperbolic Functions.
(line 74)
* casinhl: Hyperbolic Functions.
(line 75)
* casinl: Inverse Trig Functions.
(line 65)
* catan: Inverse Trig Functions.
(line 81)
* catanf: Inverse Trig Functions.
(line 82)
* catanh: Hyperbolic Functions.
(line 86)
* catanhf: Hyperbolic Functions.
(line 87)
* catanhl: Hyperbolic Functions.
(line 88)
* catanl: Inverse Trig Functions.
(line 83)
* catclose: The catgets Functions.
(line 183)
* catgets: The catgets Functions.
(line 149)
* catopen: The catgets Functions.
(line 7)
* cbc_crypt: DES Encryption. (line 117)
* cbrt: Exponents and Logarithms.
(line 131)
* cbrtf: Exponents and Logarithms.
(line 132)
* cbrtl: Exponents and Logarithms.
(line 133)
* ccos: Trig Functions. (line 71)
* ccosf: Trig Functions. (line 72)
* ccosh: Hyperbolic Functions.
(line 40)
* ccoshf: Hyperbolic Functions.
(line 41)
* ccoshl: Hyperbolic Functions.
(line 42)
* ccosl: Trig Functions. (line 73)
* ceil: Rounding Functions. (line 19)
* ceilf: Rounding Functions. (line 20)
* ceill: Rounding Functions. (line 21)
* cexp: Exponents and Logarithms.
(line 164)
* cexpf: Exponents and Logarithms.
(line 165)
* cexpl: Exponents and Logarithms.
(line 166)
* cfgetispeed: Line Speed. (line 37)
* cfgetospeed: Line Speed. (line 33)
* cfmakeraw: Noncanonical Input. (line 93)
* cfree: Freeing after Malloc.
(line 15)
* cfsetispeed: Line Speed. (line 46)
* cfsetospeed: Line Speed. (line 41)
* cfsetspeed: Line Speed. (line 51)
* chdir: Working Directory. (line 98)
* chmod: Setting Permissions. (line 25)
* chown: File Owner. (line 34)
* cimag: Operations on Complex.
(line 17)
* cimagf: Operations on Complex.
(line 18)
* cimagl: Operations on Complex.
(line 19)
* clearenv: Environment Access. (line 99)
* clearerr: Error Recovery. (line 10)
* clearerr_unlocked: Error Recovery. (line 17)
* clock: CPU Time. (line 43)
* clog: Exponents and Logarithms.
(line 172)
* clog10: Exponents and Logarithms.
(line 183)
* clog10f: Exponents and Logarithms.
(line 184)
* clog10l: Exponents and Logarithms.
(line 185)
* clogf: Exponents and Logarithms.
(line 173)
* clogl: Exponents and Logarithms.
(line 174)
* close: Opening and Closing Files.
(line 136)
* closedir: Reading/Closing Directory.
(line 119)
* closelog: closelog. (line 10)
* confstr: String Parameters. (line 10)
* conj: Operations on Complex.
(line 22)
* conjf: Operations on Complex.
(line 23)
* conjl: Operations on Complex.
(line 24)
* connect: Connecting. (line 13)
* copysign: FP Bit Twiddling. (line 11)
* copysignf: FP Bit Twiddling. (line 12)
* copysignl: FP Bit Twiddling. (line 13)
* cos: Trig Functions. (line 25)
* cosf: Trig Functions. (line 26)
* cosh: Hyperbolic Functions.
(line 17)
* coshf: Hyperbolic Functions.
(line 18)
* coshl: Hyperbolic Functions.
(line 19)
* cosl: Trig Functions. (line 27)
* cpow: Exponents and Logarithms.
(line 201)
* cpowf: Exponents and Logarithms.
(line 203)
* cpowl: Exponents and Logarithms.
(line 205)
* cproj: Operations on Complex.
(line 40)
* cprojf: Operations on Complex.
(line 41)
* cprojl: Operations on Complex.
(line 42)
* CPU_CLR: CPU Affinity. (line 78)
* CPU_ISSET: CPU Affinity. (line 86)
* CPU_SET: CPU Affinity. (line 70)
* CPU_ZERO: CPU Affinity. (line 65)
* creal: Operations on Complex.
(line 12)
* crealf: Operations on Complex.
(line 13)
* creall: Operations on Complex.
(line 14)
* creat: Opening and Closing Files.
(line 105)
* creat64: Opening and Closing Files.
(line 121)
* crypt: crypt. (line 7)
* crypt_r: crypt. (line 116)
* csin: Trig Functions. (line 63)
* csinf: Trig Functions. (line 64)
* csinh: Hyperbolic Functions.
(line 34)
* csinhf: Hyperbolic Functions.
(line 35)
* csinhl: Hyperbolic Functions.
(line 36)
* csinl: Trig Functions. (line 65)
* csqrt: Exponents and Logarithms.
(line 193)
* csqrtf: Exponents and Logarithms.
(line 194)
* csqrtl: Exponents and Logarithms.
(line 195)
* ctan: Trig Functions. (line 79)
* ctanf: Trig Functions. (line 80)
* ctanh: Hyperbolic Functions.
(line 46)
* ctanhf: Hyperbolic Functions.
(line 47)
* ctanhl: Hyperbolic Functions.
(line 48)
* ctanl: Trig Functions. (line 81)
* ctermid: Identifying the Terminal.
(line 16)
* ctime: Formatting Calendar Time.
(line 38)
* ctime_r: Formatting Calendar Time.
(line 48)
* cuserid: Who Logged In. (line 24)
* dcgettext: Translation with gettext.
(line 88)
* dcngettext: Advanced gettext functions.
(line 99)
* DES_FAILED: DES Encryption. (line 112)
* des_setparity: DES Encryption. (line 139)
* dgettext: Translation with gettext.
(line 76)
* difftime: Elapsed Time. (line 11)
* dirfd: Opening a Directory. (line 92)
* dirname: Finding Tokens in a String.
(line 262)
* div: Integer Division. (line 30)
* dngettext: Advanced gettext functions.
(line 91)
* drand48: SVID Random. (line 34)
* drand48_r: SVID Random. (line 158)
* drem: Remainder Functions. (line 27)
* dremf: Remainder Functions. (line 28)
* dreml: Remainder Functions. (line 30)
* DTTOIF: Directory Entries. (line 75)
* dup: Duplicating Descriptors.
(line 24)
* dup2: Duplicating Descriptors.
(line 29)
* ecb_crypt: DES Encryption. (line 61)
* ecvt: System V Number Conversion.
(line 19)
* ecvt_r: System V Number Conversion.
(line 95)
* encrypt: DES Encryption. (line 40)
* encrypt_r: DES Encryption. (line 50)
* endfsent: fstab. (line 95)
* endgrent: Scanning All Groups. (line 66)
* endhostent: Host Names. (line 207)
* endmntent: mtab. (line 122)
* endnetent: Networks Database. (line 66)
* endnetgrent: Lookup Netgroup. (line 65)
* endprotoent: Protocols Database. (line 78)
* endpwent: Scanning All Users. (line 66)
* endservent: Services Database. (line 69)
* endutent: Manipulating the Database.
(line 132)
* endutxent: XPG Functions. (line 85)
* envz_add: Envz Functions. (line 44)
* envz_entry: Envz Functions. (line 30)
* envz_get: Envz Functions. (line 37)
* envz_merge: Envz Functions. (line 52)
* envz_strip: Envz Functions. (line 62)
* erand48: SVID Random. (line 44)
* erand48_r: SVID Random. (line 173)
* erf: Special Functions. (line 10)
* erfc: Special Functions. (line 17)
* erfcf: Special Functions. (line 18)
* erfcl: Special Functions. (line 19)
* erff: Special Functions. (line 11)
* erfl: Special Functions. (line 12)
* err: Error Messages. (line 291)
* error: Error Messages. (line 145)
* error_at_line: Error Messages. (line 179)
* errx: Error Messages. (line 302)
* execl: Executing a File. (line 34)
* execle: Executing a File. (line 47)
* execlp: Executing a File. (line 64)
* execv: Executing a File. (line 18)
* execve: Executing a File. (line 40)
* execvp: Executing a File. (line 54)
* exit: Normal Termination. (line 11)
* exp: Exponents and Logarithms.
(line 7)
* exp10: Exponents and Logarithms.
(line 22)
* exp10f: Exponents and Logarithms.
(line 23)
* exp10l: Exponents and Logarithms.
(line 24)
* exp2: Exponents and Logarithms.
(line 16)
* exp2f: Exponents and Logarithms.
(line 17)
* exp2l: Exponents and Logarithms.
(line 18)
* expf: Exponents and Logarithms.
(line 8)
* expl: Exponents and Logarithms.
(line 9)
* expm1: Exponents and Logarithms.
(line 147)
* expm1f: Exponents and Logarithms.
(line 148)
* expm1l: Exponents and Logarithms.
(line 149)
* fabs: Absolute Value. (line 33)
* fabsf: Absolute Value. (line 34)
* fabsl: Absolute Value. (line 35)
* fchdir: Working Directory. (line 108)
* fchmod: Setting Permissions. (line 104)
* fchown: File Owner. (line 65)
* fclose: Closing Streams. (line 11)
* fcloseall: Closing Streams. (line 30)
* fcntl: Control Operations. (line 18)
* fcvt: System V Number Conversion.
(line 41)
* fcvt_r: System V Number Conversion.
(line 104)
* FD_CLR: Waiting for I/O. (line 59)
* FD_ISSET: Waiting for I/O. (line 65)
* FD_SET: Waiting for I/O. (line 53)
* FD_ZERO: Waiting for I/O. (line 49)
* fdatasync: Synchronizing I/O. (line 60)
* fdim: Misc FP Arithmetic. (line 31)
* fdimf: Misc FP Arithmetic. (line 32)
* fdiml: Misc FP Arithmetic. (line 33)
* fdopen: Descriptors and Streams.
(line 12)
* fdopendir: Opening a Directory. (line 53)
* feclearexcept: Status bit operations.
(line 39)
* fedisableexcept: Control Functions. (line 98)
* feenableexcept: Control Functions. (line 88)
* fegetenv: Control Functions. (line 30)
* fegetexcept: Control Functions. (line 108)
* fegetexceptflag: Status bit operations.
(line 89)
* fegetround: Rounding. (line 69)
* feholdexcept: Control Functions. (line 37)
* feof: EOF and Errors. (line 33)
* feof_unlocked: EOF and Errors. (line 39)
* feraiseexcept: Status bit operations.
(line 46)
* ferror: EOF and Errors. (line 47)
* ferror_unlocked: EOF and Errors. (line 54)
* fesetenv: Control Functions. (line 66)
* fesetexceptflag: Status bit operations.
(line 97)
* fesetround: Rounding. (line 75)
* fetestexcept: Status bit operations.
(line 58)
* feupdateenv: Control Functions. (line 72)
* fflush: Flushing Buffers. (line 26)
* fflush_unlocked: Flushing Buffers. (line 34)
* fgetc: Character Input. (line 23)
* fgetc_unlocked: Character Input. (line 34)
* fgetgrent: Scanning All Groups. (line 14)
* fgetgrent_r: Scanning All Groups. (line 25)
* fgetpos: Portable Positioning.
(line 77)
* fgetpos64: Portable Positioning.
(line 88)
* fgetpwent: Scanning All Users. (line 14)
* fgetpwent_r: Scanning All Users. (line 24)
* fgets: Line Input. (line 74)
* fgets_unlocked: Line Input. (line 115)
* fgetwc: Character Input. (line 29)
* fgetwc_unlocked: Character Input. (line 38)
* fgetws: Line Input. (line 94)
* fgetws_unlocked: Line Input. (line 122)
* fileno: Descriptors and Streams.
(line 37)
* fileno_unlocked: Descriptors and Streams.
(line 43)
* finite: Floating Point Classes.
(line 97)
* finitef: Floating Point Classes.
(line 98)
* finitel: Floating Point Classes.
(line 99)
* flockfile: Streams and Threads. (line 31)
* floor: Rounding Functions. (line 25)
* floorf: Rounding Functions. (line 26)
* floorl: Rounding Functions. (line 27)
* fma: Misc FP Arithmetic. (line 40)
* fmaf: Misc FP Arithmetic. (line 41)
* fmal: Misc FP Arithmetic. (line 43)
* fmax: Misc FP Arithmetic. (line 23)
* fmaxf: Misc FP Arithmetic. (line 24)
* fmaxl: Misc FP Arithmetic. (line 25)
* fmemopen: String Streams. (line 11)
* fmin: Misc FP Arithmetic. (line 12)
* fminf: Misc FP Arithmetic. (line 13)
* fminl: Misc FP Arithmetic. (line 14)
* fmod: Remainder Functions. (line 11)
* fmodf: Remainder Functions. (line 12)
* fmodl: Remainder Functions. (line 14)
* fmtmsg: Printing Formatted Messages.
(line 55)
* fnmatch: Wildcard Matching. (line 13)
* fopen: Opening Streams. (line 14)
* fopen64: Opening Streams. (line 127)
* fopencookie: Streams and Cookies. (line 58)
* fork: Creating a Process. (line 10)
* forkpty: Pseudo-Terminal Pairs.
(line 37)
* fpathconf: Pathconf. (line 36)
* fpclassify: Floating Point Classes.
(line 10)
* fprintf: Formatted Output Functions.
(line 26)
* fputc: Simple Output. (line 13)
* fputc_unlocked: Simple Output. (line 23)
* fputs: Simple Output. (line 75)
* fputs_unlocked: Simple Output. (line 101)
* fputwc: Simple Output. (line 18)
* fputwc_unlocked: Simple Output. (line 27)
* fputws: Simple Output. (line 92)
* fputws_unlocked: Simple Output. (line 107)
* fread: Block Input/Output. (line 29)
* fread_unlocked: Block Input/Output. (line 43)
* free: Freeing after Malloc.
(line 11)
* freopen: Opening Streams. (line 151)
* freopen64: Opening Streams. (line 175)
* frexp: Normalization Functions.
(line 17)
* frexpf: Normalization Functions.
(line 18)
* frexpl: Normalization Functions.
(line 19)
* fscanf: Formatted Input Functions.
(line 32)
* fseek: File Positioning. (line 63)
* fseeko: File Positioning. (line 79)
* fseeko64: File Positioning. (line 98)
* fsetpos: Portable Positioning.
(line 96)
* fsetpos64: Portable Positioning.
(line 110)
* fstat: Reading Attributes. (line 43)
* fstat64: Reading Attributes. (line 58)
* fsync: Synchronizing I/O. (line 28)
* ftell: File Positioning. (line 22)
* ftello: File Positioning. (line 31)
* ftello64: File Positioning. (line 52)
* ftruncate: File Size. (line 77)
* ftruncate64: File Size. (line 131)
* ftrylockfile: Streams and Threads. (line 39)
* ftw: Working with Directory Trees.
(line 127)
* ftw64: Working with Directory Trees.
(line 176)
* funlockfile: Streams and Threads. (line 47)
* futimes: File Times. (line 123)
* fwide: Streams and I18N. (line 59)
* fwprintf: Formatted Output Functions.
(line 30)
* fwrite: Block Input/Output. (line 50)
* fwrite_unlocked: Block Input/Output. (line 57)
* fwscanf: Formatted Input Functions.
(line 36)
* gamma: Special Functions. (line 51)
* gammaf: Special Functions. (line 52)
* gammal: Special Functions. (line 53)
* gcvt: System V Number Conversion.
(line 56)
* get_avphys_pages: Query Memory Parameters.
(line 72)
* get_current_dir_name: Working Directory. (line 87)
* get_nprocs: Processor Resources. (line 35)
* get_nprocs_conf: Processor Resources. (line 29)
* get_phys_pages: Query Memory Parameters.
(line 65)
* getauxval: Auxiliary Vector. (line 18)
* getc: Character Input. (line 44)
* getc_unlocked: Character Input. (line 57)
* getchar: Character Input. (line 67)
* getchar_unlocked: Character Input. (line 75)
* getcontext: System V contexts. (line 50)
* getcwd: Working Directory. (line 24)
* getdate: General Time String Parsing.
(line 45)
* getdate_r: General Time String Parsing.
(line 146)
* getdelim: Line Input. (line 55)
* getdomainnname: Host Identification. (line 99)
* getegid: Reading Persona. (line 30)
* getenv: Environment Access. (line 16)
* geteuid: Reading Persona. (line 26)
* getfsent: fstab. (line 100)
* getfsfile: fstab. (line 125)
* getfsspec: fstab. (line 111)
* getgid: Reading Persona. (line 23)
* getgrent: Scanning All Groups. (line 48)
* getgrent_r: Scanning All Groups. (line 56)
* getgrgid: Lookup Group. (line 11)
* getgrgid_r: Lookup Group. (line 20)
* getgrnam: Lookup Group. (line 37)
* getgrnam_r: Lookup Group. (line 47)
* getgrouplist: Setting Groups. (line 99)
* getgroups: Reading Persona. (line 34)
* gethostbyaddr: Host Names. (line 77)
* gethostbyaddr_r: Host Names. (line 174)
* gethostbyname: Host Names. (line 67)
* gethostbyname2: Host Names. (line 71)
* gethostbyname2_r: Host Names. (line 166)
* gethostbyname_r: Host Names. (line 117)
* gethostent: Host Names. (line 203)
* gethostid: Host Identification. (line 117)
* gethostname: Host Identification. (line 55)
* getitimer: Setting an Alarm. (line 84)
* getline: Line Input. (line 21)
* getloadavg: Processor Resources. (line 47)
* getlogin: Who Logged In. (line 17)
* getmntent: mtab. (line 130)
* getmntent_r: mtab. (line 155)
* getnetbyaddr: Networks Database. (line 42)
* getnetbyname: Networks Database. (line 38)
* getnetent: Networks Database. (line 62)
* getnetgrent: Lookup Netgroup. (line 36)
* getnetgrent_r: Lookup Netgroup. (line 50)
* getopt: Using Getopt. (line 36)
* getopt_long: Getopt Long Options. (line 44)
* getopt_long_only: Getopt Long Options. (line 95)
* getpagesize: Query Memory Parameters.
(line 34)
* getpass: getpass. (line 11)
* getpeername: Who is Connected. (line 8)
* getpgid: Process Group Functions.
(line 67)
* getpgrp: Process Group Functions.
(line 58)
* getpid: Process Identification.
(line 17)
* getppid: Process Identification.
(line 21)
* getpriority: Traditional Scheduling Functions.
(line 25)
* getprotobyname: Protocols Database. (line 51)
* getprotobynumber: Protocols Database. (line 56)
* getprotoent: Protocols Database. (line 74)
* getpt: Allocation. (line 11)
* getpwent: Scanning All Users. (line 47)
* getpwent_r: Scanning All Users. (line 57)
* getpwnam: Lookup User. (line 37)
* getpwnam_r: Lookup User. (line 47)
* getpwuid: Lookup User. (line 11)
* getpwuid_r: Lookup User. (line 20)
* getrlimit: Limits on Resources. (line 30)
* getrlimit64: Limits on Resources. (line 41)
* getrusage: Resource Usage. (line 11)
* gets: Line Input. (line 128)
* getservbyname: Services Database. (line 37)
* getservbyport: Services Database. (line 47)
* getservent: Services Database. (line 65)
* getsid: Process Group Functions.
(line 31)
* getsockname: Reading Address. (line 12)
* getsockopt: Socket Option Functions.
(line 11)
* getsubopt: Suboptions. (line 17)
* gettext: Translation with gettext.
(line 32)
* gettimeofday: High-Resolution Calendar.
(line 31)
* getuid: Reading Persona. (line 20)
* getumask: Setting Permissions. (line 63)
* getutent: Manipulating the Database.
(line 122)
* getutent_r: Manipulating the Database.
(line 205)
* getutid: Manipulating the Database.
(line 135)
* getutid_r: Manipulating the Database.
(line 220)
* getutline: Manipulating the Database.
(line 161)
* getutline_r: Manipulating the Database.
(line 233)
* getutmp: XPG Functions. (line 114)
* getutmpx: XPG Functions. (line 119)
* getutxent: XPG Functions. (line 80)
* getutxid: XPG Functions. (line 89)
* getutxline: XPG Functions. (line 94)
* getw: Character Input. (line 116)
* getwc: Character Input. (line 51)
* getwc_unlocked: Character Input. (line 61)
* getwchar: Character Input. (line 71)
* getwchar_unlocked: Character Input. (line 79)
* getwd: Working Directory. (line 76)
* glob: Calling Glob. (line 176)
* glob64: Calling Glob. (line 232)
* globfree: More Flags for Globbing.
(line 124)
* globfree64: More Flags for Globbing.
(line 130)
* gmtime: Broken-down Time. (line 120)
* gmtime_r: Broken-down Time. (line 132)
* grantpt <1>: Configuring and compiling.
(line 124)
* grantpt: Allocation. (line 23)
* gsignal: Signaling Yourself. (line 16)
* gtty: BSD Terminal Modes. (line 35)
* hasmntopt: mtab. (line 197)
* hcreate: Hash Search Function.
(line 14)
* hcreate_r: Hash Search Function.
(line 107)
* hdestroy: Hash Search Function.
(line 40)
* hdestroy_r: Hash Search Function.
(line 122)
* hsearch: Hash Search Function.
(line 80)
* hsearch_r: Hash Search Function.
(line 129)
* htonl: Byte Order. (line 44)
* htons: Byte Order. (line 36)
* hypot: Exponents and Logarithms.
(line 137)
* hypotf: Exponents and Logarithms.
(line 138)
* hypotl: Exponents and Logarithms.
(line 139)
* iconv: Generic Conversion Interface.
(line 110)
* iconv_close: Generic Conversion Interface.
(line 89)
* iconv_open: Generic Conversion Interface.
(line 28)
* if_freenameindex: Interface Naming. (line 57)
* if_indextoname: Interface Naming. (line 30)
* if_nameindex: Interface Naming. (line 48)
* if_nametoindex: Interface Naming. (line 25)
* IFTODT: Directory Entries. (line 72)
* ilogb: Exponents and Logarithms.
(line 69)
* ilogbf: Exponents and Logarithms.
(line 70)
* ilogbl: Exponents and Logarithms.
(line 71)
* imaxabs: Absolute Value. (line 21)
* imaxdiv: Integer Division. (line 101)
* index: Search Functions. (line 265)
* inet_addr: Host Address Functions.
(line 19)
* inet_aton: Host Address Functions.
(line 13)
* inet_lnaof: Host Address Functions.
(line 60)
* inet_makeaddr: Host Address Functions.
(line 55)
* inet_netof: Host Address Functions.
(line 68)
* inet_network: Host Address Functions.
(line 28)
* inet_ntoa: Host Address Functions.
(line 38)
* inet_ntop: Host Address Functions.
(line 85)
* inet_pton: Host Address Functions.
(line 76)
* initgroups: Setting Groups. (line 81)
* initstate: BSD Random. (line 32)
* initstate_r: BSD Random. (line 89)
* innetgr: Netgroup Membership. (line 12)
* ioctl: IOCTLs. (line 33)
* isalnum: Classification of Characters.
(line 49)
* isalpha: Classification of Characters.
(line 36)
* isascii: Classification of Characters.
(line 104)
* isatty: Is It a Terminal. (line 14)
* isblank: Classification of Characters.
(line 86)
* iscntrl: Classification of Characters.
(line 100)
* isdigit: Classification of Characters.
(line 46)
* isfinite: Floating Point Classes.
(line 46)
* isgraph: Classification of Characters.
(line 91)
* isgreater: FP Comparison Functions.
(line 20)
* isgreaterequal: FP Comparison Functions.
(line 25)
* isinf: Floating Point Classes.
(line 78)
* isinff: Floating Point Classes.
(line 79)
* isinfl: Floating Point Classes.
(line 80)
* isless: FP Comparison Functions.
(line 30)
* islessequal: FP Comparison Functions.
(line 35)
* islessgreater: FP Comparison Functions.
(line 40)
* islower: Classification of Characters.
(line 28)
* isnan: Floating Point Classes.
(line 61)
* isnanf: Floating Point Classes.
(line 85)
* isnanl: Floating Point Classes.
(line 86)
* isnormal: Floating Point Classes.
(line 55)
* isprint: Classification of Characters.
(line 96)
* ispunct: Classification of Characters.
(line 59)
* issignaling: Floating Point Classes.
(line 67)
* isspace: Classification of Characters.
(line 63)
* isunordered: FP Comparison Functions.
(line 49)
* isupper: Classification of Characters.
(line 32)
* iswalnum: Classification of Wide Characters.
(line 69)
* iswalpha: Classification of Wide Characters.
(line 81)
* iswblank: Classification of Wide Characters.
(line 222)
* iswcntrl: Classification of Wide Characters.
(line 97)
* iswctype: Classification of Wide Characters.
(line 56)
* iswdigit: Classification of Wide Characters.
(line 107)
* iswgraph: Classification of Wide Characters.
(line 127)
* iswlower: Classification of Wide Characters.
(line 138)
* iswprint: Classification of Wide Characters.
(line 148)
* iswpunct: Classification of Wide Characters.
(line 158)
* iswspace: Classification of Wide Characters.
(line 168)
* iswupper: Classification of Wide Characters.
(line 197)
* iswxdigit: Classification of Wide Characters.
(line 207)
* isxdigit: Classification of Characters.
(line 54)
* j0: Special Functions. (line 68)
* j0f: Special Functions. (line 69)
* j0l: Special Functions. (line 70)
* j1: Special Functions. (line 74)
* j1f: Special Functions. (line 75)
* j1l: Special Functions. (line 76)
* jn: Special Functions. (line 80)
* jnf: Special Functions. (line 81)
* jnl: Special Functions. (line 82)
* jrand48: SVID Random. (line 77)
* jrand48_r: SVID Random. (line 226)
* kill: Signaling Another Process.
(line 27)
* killpg: Signaling Another Process.
(line 79)
* l64a: Encode Binary Data. (line 13)
* labs: Absolute Value. (line 19)
* lcong48: SVID Random. (line 129)
* lcong48_r: SVID Random. (line 282)
* ldexp: Normalization Functions.
(line 35)
* ldexpf: Normalization Functions.
(line 36)
* ldexpl: Normalization Functions.
(line 37)
* ldiv: Integer Division. (line 58)
* lfind: Array Search Function.
(line 13)
* lgamma: Special Functions. (line 23)
* lgamma_r: Special Functions. (line 44)
* lgammaf: Special Functions. (line 24)
* lgammaf_r: Special Functions. (line 45)
* lgammal: Special Functions. (line 25)
* lgammal_r: Special Functions. (line 46)
* link: Hard Links. (line 28)
* lio_listio: Asynchronous Reads/Writes.
(line 175)
* lio_listio64: Asynchronous Reads/Writes.
(line 258)
* listen: Listening. (line 30)
* llabs: Absolute Value. (line 20)
* lldiv: Integer Division. (line 77)
* llrint: Rounding Functions. (line 71)
* llrintf: Rounding Functions. (line 72)
* llrintl: Rounding Functions. (line 73)
* llround: Rounding Functions. (line 83)
* llroundf: Rounding Functions. (line 84)
* llroundl: Rounding Functions. (line 85)
* localeconv: The Lame Way to Locale Data.
(line 16)
* localtime: Broken-down Time. (line 85)
* localtime_r: Broken-down Time. (line 108)
* log: Exponents and Logarithms.
(line 34)
* log10: Exponents and Logarithms.
(line 44)
* log10f: Exponents and Logarithms.
(line 45)
* log10l: Exponents and Logarithms.
(line 46)
* log1p: Exponents and Logarithms.
(line 155)
* log1pf: Exponents and Logarithms.
(line 156)
* log1pl: Exponents and Logarithms.
(line 157)
* log2: Exponents and Logarithms.
(line 51)
* log2f: Exponents and Logarithms.
(line 52)
* log2l: Exponents and Logarithms.
(line 53)
* logb: Exponents and Logarithms.
(line 57)
* logbf: Exponents and Logarithms.
(line 58)
* logbl: Exponents and Logarithms.
(line 59)
* logf: Exponents and Logarithms.
(line 35)
* login: Logging In and Out. (line 22)
* login_tty: Logging In and Out. (line 14)
* logl: Exponents and Logarithms.
(line 36)
* logout: Logging In and Out. (line 34)
* logwtmp: Logging In and Out. (line 42)
* longjmp: Non-Local Details. (line 22)
* lrand48: SVID Random. (line 53)
* lrand48_r: SVID Random. (line 187)
* lrint: Rounding Functions. (line 65)
* lrintf: Rounding Functions. (line 66)
* lrintl: Rounding Functions. (line 67)
* lround: Rounding Functions. (line 77)
* lroundf: Rounding Functions. (line 78)
* lroundl: Rounding Functions. (line 79)
* lsearch: Array Search Function.
(line 29)
* lseek: File Position Primitive.
(line 16)
* lseek64: File Position Primitive.
(line 97)
* lstat: Reading Attributes. (line 69)
* lstat64: Reading Attributes. (line 79)
* lutimes: File Times. (line 110)
* madvise: Memory-mapped I/O. (line 237)
* main: Program Arguments. (line 6)
* makecontext: System V contexts. (line 74)
* mallinfo: Statistics of Malloc.
(line 56)
* malloc: Basic Allocation. (line 10)
* mallopt: Malloc Tunable Parameters.
(line 11)
* matherr: FP Exceptions. (line 24)
* mblen: Non-reentrant Character Conversion.
(line 73)
* mbrlen: Converting a Character.
(line 171)
* mbrtowc: Converting a Character.
(line 81)
* mbsinit: Keeping the state. (line 47)
* mbsnrtowcs: Converting Strings. (line 134)
* mbsrtowcs: Converting Strings. (line 15)
* mbstowcs: Non-reentrant String Conversion.
(line 13)
* mbtowc: Non-reentrant Character Conversion.
(line 8)
* mcheck: Heap Consistency Checking.
(line 11)
* memalign: Aligned Memory Blocks.
(line 17)
* memccpy: Copying and Concatenation.
(line 150)
* memchr: Search Functions. (line 11)
* memcmp: String/Array Comparison.
(line 25)
* memcpy: Copying and Concatenation.
(line 34)
* memfrob: Trivial Encryption. (line 18)
* memmem: Search Functions. (line 179)
* memmove: Copying and Concatenation.
(line 118)
* mempcpy: Copying and Concatenation.
(line 72)
* memrchr: Search Functions. (line 49)
* memset: Copying and Concatenation.
(line 157)
* mkdir: Creating Directories.
(line 10)
* mkdtemp: Temporary Files. (line 177)
* mkfifo: FIFO Special Files. (line 20)
* mknod: Making Special Files.
(line 13)
* mkstemp: Temporary Files. (line 159)
* mktemp: Temporary Files. (line 145)
* mktime: Broken-down Time. (line 139)
* mlock: Page Lock Functions. (line 20)
* mlockall: Page Lock Functions. (line 72)
* mmap: Memory-mapped I/O. (line 35)
* mmap64: Memory-mapped I/O. (line 128)
* modf: Rounding Functions. (line 89)
* modff: Rounding Functions. (line 90)
* modfl: Rounding Functions. (line 92)
* mount: Mount-Unmount-Remount.
(line 19)
* mprobe: Heap Consistency Checking.
(line 50)
* mrand48: SVID Random. (line 72)
* mrand48_r: SVID Random. (line 214)
* mremap: Memory-mapped I/O. (line 195)
* msync: Memory-mapped I/O. (line 161)
* mtrace: Tracing malloc. (line 7)
* munlock: Page Lock Functions. (line 65)
* munlockall: Page Lock Functions. (line 138)
* munmap: Memory-mapped I/O. (line 141)
* muntrace: Tracing malloc. (line 27)
* nan: FP Bit Twiddling. (line 55)
* nanf: FP Bit Twiddling. (line 56)
* nanl: FP Bit Twiddling. (line 57)
* nanosleep: Sleeping. (line 55)
* nearbyint: Rounding Functions. (line 52)
* nearbyintf: Rounding Functions. (line 53)
* nearbyintl: Rounding Functions. (line 54)
* nextafter: FP Bit Twiddling. (line 33)
* nextafterf: FP Bit Twiddling. (line 34)
* nextafterl: FP Bit Twiddling. (line 35)
* nexttoward: FP Bit Twiddling. (line 49)
* nexttowardf: FP Bit Twiddling. (line 50)
* nexttowardl: FP Bit Twiddling. (line 51)
* nftw: Working with Directory Trees.
(line 187)
* nftw64: Working with Directory Trees.
(line 250)
* ngettext: Advanced gettext functions.
(line 72)
* nice: Traditional Scheduling Functions.
(line 90)
* nl_langinfo: The Elegant and Fast Way.
(line 13)
* notfound: Actions in the NSS configuration.
(line 25)
* nrand48: SVID Random. (line 60)
* nrand48_r: SVID Random. (line 200)
* ntohl: Byte Order. (line 50)
* ntohs: Byte Order. (line 40)
* ntp_adjtime: High Accuracy Clock. (line 151)
* ntp_gettime: High Accuracy Clock. (line 36)
* obstack_1grow: Growing Objects. (line 46)
* obstack_1grow_fast: Extra Fast Growing. (line 32)
* obstack_alignment_mask: Obstacks Data Alignment.
(line 15)
* obstack_alloc: Allocation in an Obstack.
(line 11)
* obstack_base: Status of an Obstack.
(line 11)
* obstack_blank: Growing Objects. (line 30)
* obstack_blank_fast: Extra Fast Growing. (line 49)
* obstack_chunk_alloc: Preparing for Obstacks.
(line 11)
* obstack_chunk_free: Preparing for Obstacks.
(line 11)
* obstack_chunk_size: Obstack Chunks. (line 38)
* obstack_copy: Allocation in an Obstack.
(line 41)
* obstack_copy0: Allocation in an Obstack.
(line 47)
* obstack_finish: Growing Objects. (line 62)
* obstack_free: Freeing Obstack Objects.
(line 13)
* obstack_grow: Growing Objects. (line 35)
* obstack_grow0: Growing Objects. (line 41)
* obstack_init: Preparing for Obstacks.
(line 34)
* obstack_int_grow: Growing Objects. (line 57)
* obstack_int_grow_fast: Extra Fast Growing. (line 43)
* obstack_next_free: Status of an Obstack.
(line 22)
* obstack_object_size <1>: Status of an Obstack.
(line 28)
* obstack_object_size: Growing Objects. (line 78)
* obstack_printf: Dynamic Output. (line 37)
* obstack_ptr_grow: Growing Objects. (line 51)
* obstack_ptr_grow_fast: Extra Fast Growing. (line 37)
* obstack_room: Extra Fast Growing. (line 23)
* obstack_vprintf: Variable Arguments Output.
(line 98)
* offsetof: Structure Measurement.
(line 10)
* on_exit: Cleanups on Exit. (line 24)
* open: Opening and Closing Files.
(line 11)
* open64: Opening and Closing Files.
(line 93)
* open_memstream: String Streams. (line 74)
* opendir: Opening a Directory. (line 18)
* openlog: openlog. (line 10)
* openpty: Pseudo-Terminal Pairs.
(line 11)
* parse_printf_format: Parsing a Template String.
(line 17)
* pathconf: Pathconf. (line 14)
* pause: Using Pause. (line 11)
* pclose: Pipe to a Subprocess.
(line 39)
* perror: Error Messages. (line 46)
* pipe: Creating a Pipe. (line 17)
* popen: Pipe to a Subprocess.
(line 18)
* posix_memalign: Aligned Memory Blocks.
(line 25)
* pow: Exponents and Logarithms.
(line 112)
* pow10: Exponents and Logarithms.
(line 25)
* pow10f: Exponents and Logarithms.
(line 26)
* pow10l: Exponents and Logarithms.
(line 27)
* powf: Exponents and Logarithms.
(line 113)
* powl: Exponents and Logarithms.
(line 114)
* pread: I/O Primitives. (line 110)
* pread64: I/O Primitives. (line 143)
* printf: Formatted Output Functions.
(line 14)
* printf_size: Predefined Printf Handlers.
(line 12)
* printf_size_info: Predefined Printf Handlers.
(line 42)
* psignal: Signal Messages. (line 25)
* pthread_getattr_default_np: Default Thread Attributes.
(line 10)
* ptsname: Allocation. (line 74)
* ptsname_r: Allocation. (line 81)
* putc: Simple Output. (line 33)
* putc_unlocked: Simple Output. (line 47)
* putchar: Simple Output. (line 57)
* putchar_unlocked: Simple Output. (line 65)
* putenv: Environment Access. (line 34)
* putpwent: Writing a User Entry.
(line 7)
* puts: Simple Output. (line 113)
* pututline: Manipulating the Database.
(line 180)
* pututxline: XPG Functions. (line 99)
* putw: Simple Output. (line 126)
* putwc: Simple Output. (line 40)
* putwc_unlocked: Simple Output. (line 51)
* putwchar: Simple Output. (line 61)
* putwchar_unlocked: Simple Output. (line 69)
* pwrite: I/O Primitives. (line 265)
* pwrite64: I/O Primitives. (line 298)
* qecvt: System V Number Conversion.
(line 68)
* qecvt_r: System V Number Conversion.
(line 113)
* qfcvt: System V Number Conversion.
(line 74)
* qfcvt_r: System V Number Conversion.
(line 122)
* qgcvt: System V Number Conversion.
(line 79)
* qsort: Array Sort Function. (line 11)
* raise: Signaling Yourself. (line 10)
* rand: ISO Random. (line 20)
* rand_r: ISO Random. (line 36)
* random: BSD Random. (line 13)
* random_r: BSD Random. (line 78)
* rawmemchr: Search Functions. (line 24)
* read: I/O Primitives. (line 16)
* readdir: Reading/Closing Directory.
(line 11)
* readdir64: Reading/Closing Directory.
(line 103)
* readdir64_r: Reading/Closing Directory.
(line 112)
* readdir_r: Reading/Closing Directory.
(line 42)
* readlink: Symbolic Links. (line 71)
* readv: Scatter-Gather. (line 32)
* realloc: Changing Block Size. (line 16)
* realpath: Symbolic Links. (line 157)
* recv: Receiving Data. (line 12)
* recvfrom: Receiving Datagrams. (line 12)
* regcomp: POSIX Regexp Compilation.
(line 32)
* regerror: Regexp Cleanup. (line 25)
* regexec: Matching POSIX Regexps.
(line 14)
* regfree: Regexp Cleanup. (line 10)
* register_printf_function: Registering New Conversions.
(line 11)
* remainder: Remainder Functions. (line 43)
* remainderf: Remainder Functions. (line 44)
* remainderl: Remainder Functions. (line 46)
* remove: Deleting Files. (line 71)
* rename: Renaming Files. (line 9)
* rewind: File Positioning. (line 134)
* rewinddir: Random Access Directory.
(line 11)
* rindex: Search Functions. (line 271)
* rint: Rounding Functions. (line 39)
* rintf: Rounding Functions. (line 40)
* rintl: Rounding Functions. (line 41)
* rmdir: Deleting Files. (line 52)
* round: Rounding Functions. (line 58)
* roundf: Rounding Functions. (line 59)
* roundl: Rounding Functions. (line 60)
* rpmatch: Yes-or-No Questions. (line 16)
* S_ISBLK: Testing File Type. (line 34)
* S_ISCHR: Testing File Type. (line 30)
* S_ISDIR: Testing File Type. (line 27)
* S_ISFIFO: Testing File Type. (line 41)
* S_ISLNK: Testing File Type. (line 45)
* S_ISREG: Testing File Type. (line 38)
* S_ISSOCK: Testing File Type. (line 49)
* S_TYPEISMQ: Testing File Type. (line 99)
* S_TYPEISSEM: Testing File Type. (line 104)
* S_TYPEISSHM: Testing File Type. (line 109)
* scalb: Normalization Functions.
(line 49)
* scalbf: Normalization Functions.
(line 50)
* scalbl: Normalization Functions.
(line 52)
* scalbln: Normalization Functions.
(line 61)
* scalblnf: Normalization Functions.
(line 62)
* scalblnl: Normalization Functions.
(line 63)
* scalbn: Normalization Functions.
(line 55)
* scalbnf: Normalization Functions.
(line 56)
* scalbnl: Normalization Functions.
(line 57)
* scandir: Scanning Directory Content.
(line 14)
* scandir64: Scanning Directory Content.
(line 60)
* scanf: Formatted Input Functions.
(line 10)
* sched_get_priority_max: Basic Scheduling Functions.
(line 156)
* sched_get_priority_min: Basic Scheduling Functions.
(line 142)
* sched_getaffinity: CPU Affinity. (line 99)
* sched_getparam: Basic Scheduling Functions.
(line 121)
* sched_getscheduler: Basic Scheduling Functions.
(line 86)
* sched_rr_get_interval: Basic Scheduling Functions.
(line 171)
* sched_setaffinity: CPU Affinity. (line 122)
* sched_setparam: Basic Scheduling Functions.
(line 114)
* sched_setscheduler: Basic Scheduling Functions.
(line 36)
* sched_yield: Basic Scheduling Functions.
(line 187)
* secure_getenv: Environment Access. (line 24)
* seed48: SVID Random. (line 105)
* seed48_r: SVID Random. (line 268)
* seekdir: Random Access Directory.
(line 25)
* select: Waiting for I/O. (line 75)
* send: Sending Data. (line 14)
* sendto: Sending Datagrams. (line 19)
* setbuf: Controlling Buffering.
(line 78)
* setbuffer: Controlling Buffering.
(line 87)
* setcontext: System V contexts. (line 116)
* setdomainname: Host Identification. (line 108)
* setegid: Setting Groups. (line 11)
* setenv: Environment Access. (line 57)
* seteuid: Setting User ID. (line 11)
* setfsent: fstab. (line 83)
* setgid: Setting Groups. (line 27)
* setgrent: Scanning All Groups. (line 44)
* setgroups: Setting Groups. (line 70)
* sethostent: Host Names. (line 193)
* sethostid: Host Identification. (line 131)
* sethostname: Host Identification. (line 80)
* setitimer: Setting an Alarm. (line 69)
* setjmp: Non-Local Details. (line 16)
* setkey: DES Encryption. (line 34)
* setkey_r: DES Encryption. (line 48)
* setlinebuf: Controlling Buffering.
(line 95)
* setlocale: Setting the Locale. (line 25)
* setlogmask: setlogmask. (line 10)
* setmntent: mtab. (line 110)
* setnetent: Networks Database. (line 53)
* setnetgrent: Lookup Netgroup. (line 13)
* setpgid: Process Group Functions.
(line 83)
* setpgrp: Process Group Functions.
(line 115)
* setpriority: Traditional Scheduling Functions.
(line 47)
* setprotoent: Protocols Database. (line 65)
* setpwent: Scanning All Users. (line 43)
* setregid: Setting Groups. (line 38)
* setreuid: Setting User ID. (line 48)
* setrlimit: Limits on Resources. (line 51)
* setrlimit64: Limits on Resources. (line 69)
* setservent: Services Database. (line 56)
* setsid: Process Group Functions.
(line 11)
* setsockopt: Socket Option Functions.
(line 35)
* setstate: BSD Random. (line 43)
* setstate_r: BSD Random. (line 95)
* settimeofday: High-Resolution Calendar.
(line 51)
* setuid: Setting User ID. (line 34)
* setutent: Manipulating the Database.
(line 114)
* setutxent: XPG Functions. (line 76)
* setvbuf: Controlling Buffering.
(line 15)
* shutdown: Closing a Socket. (line 17)
* sigaction: Advanced Signal Handling.
(line 41)
* sigaddset: Signal Sets. (line 44)
* sigaltstack: Signal Stack. (line 71)
* sigblock: Blocking in BSD. (line 17)
* sigdelset: Signal Sets. (line 55)
* sigemptyset: Signal Sets. (line 36)
* sigfillset: Signal Sets. (line 40)
* siginterrupt: BSD Handler. (line 52)
* sigismember: Signal Sets. (line 64)
* siglongjmp: Non-Local Exits and Signals.
(line 30)
* sigmask: Blocking in BSD. (line 7)
* signal: Basic Signal Handling.
(line 21)
* signbit: FP Bit Twiddling. (line 24)
* significand: Normalization Functions.
(line 67)
* significandf: Normalization Functions.
(line 68)
* significandl: Normalization Functions.
(line 69)
* sigpause: Blocking in BSD. (line 29)
* sigpending: Checking for Pending Signals.
(line 10)
* sigprocmask: Process Signal Mask. (line 22)
* sigsetjmp: Non-Local Exits and Signals.
(line 25)
* sigsetmask: Blocking in BSD. (line 23)
* sigstack: Signal Stack. (line 112)
* sigsuspend: Sigsuspend. (line 12)
* sigvec: BSD Handler. (line 46)
* sin: Trig Functions. (line 19)
* sincos: Trig Functions. (line 46)
* sincosf: Trig Functions. (line 47)
* sincosl: Trig Functions. (line 49)
* sinf: Trig Functions. (line 20)
* sinh: Hyperbolic Functions.
(line 10)
* sinhf: Hyperbolic Functions.
(line 11)
* sinhl: Hyperbolic Functions.
(line 12)
* sinl: Trig Functions. (line 21)
* sleep: Sleeping. (line 15)
* snprintf: Formatted Output Functions.
(line 78)
* socket: Creating a Socket. (line 10)
* socketpair: Socket Pairs. (line 15)
* sprintf: Formatted Output Functions.
(line 34)
* sqrt: Exponents and Logarithms.
(line 123)
* sqrtf: Exponents and Logarithms.
(line 124)
* sqrtl: Exponents and Logarithms.
(line 125)
* srand: ISO Random. (line 24)
* srand48: SVID Random. (line 87)
* srand48_r: SVID Random. (line 255)
* srandom: BSD Random. (line 22)
* srandom_r: BSD Random. (line 83)
* sscanf: Formatted Input Functions.
(line 40)
* ssignal: Basic Signal Handling.
(line 138)
* stat: Reading Attributes. (line 12)
* stat64: Reading Attributes. (line 33)
* stime: Simple Calendar Time.
(line 40)
* stpcpy: Copying and Concatenation.
(line 261)
* stpncpy: Copying and Concatenation.
(line 305)
* strcasecmp: String/Array Comparison.
(line 112)
* strcasestr: Search Functions. (line 167)
* strcat: Copying and Concatenation.
(line 404)
* strchr: Search Functions. (line 56)
* strchrnul: Search Functions. (line 90)
* strcmp: String/Array Comparison.
(line 80)
* strcoll: Collation Functions. (line 39)
* strcpy: Copying and Concatenation.
(line 169)
* strcspn: Search Functions. (line 210)
* strdup: Copying and Concatenation.
(line 230)
* strdupa: Copying and Concatenation.
(line 352)
* strerror: Error Messages. (line 14)
* strerror_r: Error Messages. (line 28)
* strfmon: Formatting Numbers. (line 17)
* strfry: strfry. (line 16)
* strftime: Formatting Calendar Time.
(line 60)
* strlen: String Length. (line 10)
* strncasecmp: String/Array Comparison.
(line 143)
* strncat: Copying and Concatenation.
(line 561)
* strncmp: String/Array Comparison.
(line 130)
* strncpy: Copying and Concatenation.
(line 183)
* strndup: Copying and Concatenation.
(line 247)
* strndupa: Copying and Concatenation.
(line 391)
* strnlen: String Length. (line 79)
* strpbrk: Search Functions. (line 236)
* strptime: Low-Level Time String Parsing.
(line 13)
* strrchr: Search Functions. (line 124)
* strsep: Finding Tokens in a String.
(line 156)
* strsignal: Signal Messages. (line 15)
* strspn: Search Functions. (line 186)
* strstr: Search Functions. (line 138)
* strtod: Parsing of Floats. (line 14)
* strtof: Parsing of Floats. (line 81)
* strtoimax: Parsing of Integers. (line 155)
* strtok: Finding Tokens in a String.
(line 13)
* strtok_r: Finding Tokens in a String.
(line 144)
* strtol: Parsing of Integers. (line 14)
* strtold: Parsing of Floats. (line 82)
* strtoll: Parsing of Integers. (line 98)
* strtoq: Parsing of Integers. (line 119)
* strtoul: Parsing of Integers. (line 76)
* strtoull: Parsing of Integers. (line 130)
* strtoumax: Parsing of Integers. (line 176)
* strtouq: Parsing of Integers. (line 144)
* strverscmp: String/Array Comparison.
(line 178)
* strxfrm: Collation Functions. (line 79)
* stty: BSD Terminal Modes. (line 41)
* success: Actions in the NSS configuration.
(line 21)
* SUN_LEN: Local Namespace Details.
(line 47)
* swapcontext: System V contexts. (line 145)
* swprintf: Formatted Output Functions.
(line 56)
* swscanf: Formatted Input Functions.
(line 51)
* symlink: Symbolic Links. (line 46)
* sync: Synchronizing I/O. (line 16)
* syscall: System Calls. (line 40)
* sysconf: Sysconf Definition. (line 7)
* sysctl: System Parameters. (line 14)
* syslog: syslog; vsyslog. (line 11)
* system: Running a Command. (line 12)
* sysv_signal: Basic Signal Handling.
(line 129)
* tan: Trig Functions. (line 31)
* tanf: Trig Functions. (line 32)
* tanh: Hyperbolic Functions.
(line 24)
* tanhf: Hyperbolic Functions.
(line 25)
* tanhl: Hyperbolic Functions.
(line 26)
* tanl: Trig Functions. (line 33)
* tcdrain: Line Control. (line 35)
* tcflow: Line Control. (line 94)
* tcflush: Line Control. (line 60)
* tcgetattr: Mode Functions. (line 7)
* tcgetpgrp: Terminal Access Functions.
(line 15)
* tcgetsid: Terminal Access Functions.
(line 75)
* tcsendbreak: Line Control. (line 15)
* tcsetattr: Mode Functions. (line 23)
* tcsetpgrp: Terminal Access Functions.
(line 40)
* tdelete: Tree Search Function.
(line 67)
* tdestroy: Tree Search Function.
(line 77)
* telldir: Random Access Directory.
(line 20)
* TEMP_FAILURE_RETRY: Interrupted Primitives.
(line 21)
* tempnam: Temporary Files. (line 94)
* textdomain: Locating gettext catalog.
(line 71)
* tfind: Tree Search Function.
(line 55)
* tgamma: Special Functions. (line 59)
* tgammaf: Special Functions. (line 60)
* tgammal: Special Functions. (line 61)
* time: Simple Calendar Time.
(line 33)
* timegm: Broken-down Time. (line 170)
* timelocal: Broken-down Time. (line 161)
* times: Processor Time. (line 47)
* tmpfile: Temporary Files. (line 20)
* tmpfile64: Temporary Files. (line 33)
* tmpnam: Temporary Files. (line 45)
* tmpnam_r: Temporary Files. (line 67)
* toascii: Case Conversion. (line 33)
* tolower: Case Conversion. (line 24)
* toupper: Case Conversion. (line 29)
* towctrans: Wide Character Case Conversion.
(line 34)
* towlower: Wide Character Case Conversion.
(line 45)
* towupper: Wide Character Case Conversion.
(line 56)
* trunc: Rounding Functions. (line 32)
* truncate: File Size. (line 26)
* truncate64: File Size. (line 66)
* truncf: Rounding Functions. (line 33)
* truncl: Rounding Functions. (line 34)
* tryagain: Actions in the NSS configuration.
(line 35)
* tsearch: Tree Search Function.
(line 28)
* ttyname: Is It a Terminal. (line 22)
* ttyname_r: Is It a Terminal. (line 30)
* twalk: Tree Search Function.
(line 127)
* tzset: Time Zone Functions. (line 33)
* ulimit: Limits on Resources. (line 178)
* umask: Setting Permissions. (line 44)
* umount: Mount-Unmount-Remount.
(line 252)
* umount2: Mount-Unmount-Remount.
(line 197)
* uname: Platform Type. (line 70)
* unavail: Actions in the NSS configuration.
(line 29)
* ungetc: How Unread. (line 10)
* ungetwc: How Unread. (line 45)
* unlink: Deleting Files. (line 14)
* unlockpt: Allocation. (line 56)
* unsetenv: Environment Access. (line 78)
* updwtmp: Manipulating the Database.
(line 276)
* utime: File Times. (line 51)
* utimes: File Times. (line 98)
* utmpname: Manipulating the Database.
(line 252)
* utmpxname: XPG Functions. (line 104)
* va_arg: Argument Macros. (line 18)
* va_copy: Argument Macros. (line 46)
* va_end: Argument Macros. (line 29)
* va_start: Argument Macros. (line 13)
* valloc: Aligned Memory Blocks.
(line 39)
* vasprintf: Variable Arguments Output.
(line 93)
* verr: Error Messages. (line 297)
* verrx: Error Messages. (line 309)
* versionsort: Scanning Directory Content.
(line 49)
* versionsort64: Scanning Directory Content.
(line 84)
* vfork: Creating a Process. (line 59)
* vfprintf: Variable Arguments Output.
(line 69)
* vfscanf: Variable Arguments Input.
(line 28)
* vfwprintf: Variable Arguments Output.
(line 74)
* vfwscanf: Variable Arguments Input.
(line 33)
* vlimit: Limits on Resources. (line 215)
* vprintf: Variable Arguments Output.
(line 58)
* vscanf: Variable Arguments Input.
(line 17)
* vsnprintf: Variable Arguments Output.
(line 88)
* vsprintf: Variable Arguments Output.
(line 78)
* vsscanf: Variable Arguments Input.
(line 38)
* vswprintf: Variable Arguments Output.
(line 83)
* vswscanf: Variable Arguments Input.
(line 43)
* vsyslog: syslog; vsyslog. (line 148)
* vtimes: Resource Usage. (line 105)
* vwarn: Error Messages. (line 274)
* vwarnx: Error Messages. (line 286)
* vwprintf: Variable Arguments Output.
(line 63)
* vwscanf: Variable Arguments Input.
(line 22)
* wait: Process Completion. (line 101)
* wait3: BSD Wait Functions. (line 44)
* wait4: Process Completion. (line 119)
* waitpid: Process Completion. (line 11)
* warn: Error Messages. (line 268)
* warnx: Error Messages. (line 279)
* WCOREDUMP: Process Completion Status.
(line 31)
* wcpcpy: Copying and Concatenation.
(line 292)
* wcpncpy: Copying and Concatenation.
(line 328)
* wcrtomb: Converting a Character.
(line 245)
* wcscasecmp: String/Array Comparison.
(line 121)
* wcscat: Copying and Concatenation.
(line 422)
* wcschr: Search Functions. (line 78)
* wcschrnul: Search Functions. (line 97)
* wcscmp: String/Array Comparison.
(line 96)
* wcscoll: Collation Functions. (line 44)
* wcscpy: Copying and Concatenation.
(line 176)
* wcscspn: Search Functions. (line 228)
* wcsdup: Copying and Concatenation.
(line 237)
* wcsftime: Formatting Calendar Time.
(line 395)
* wcslen: String Length. (line 67)
* wcsncasecmp: String/Array Comparison.
(line 151)
* wcsncat: Copying and Concatenation.
(line 581)
* wcsncmp: String/Array Comparison.
(line 137)
* wcsncpy: Copying and Concatenation.
(line 207)
* wcsnlen: String Length. (line 94)
* wcsnrtombs: Converting Strings. (line 184)
* wcspbrk: Search Functions. (line 255)
* wcsrchr: Search Functions. (line 133)
* wcsrtombs: Converting Strings. (line 91)
* wcsspn: Search Functions. (line 203)
* wcsstr: Search Functions. (line 152)
* wcstod: Parsing of Floats. (line 93)
* wcstof: Parsing of Floats. (line 94)
* wcstoimax: Parsing of Integers. (line 169)
* wcstok: Finding Tokens in a String.
(line 53)
* wcstol: Parsing of Integers. (line 69)
* wcstold: Parsing of Floats. (line 96)
* wcstoll: Parsing of Integers. (line 112)
* wcstombs: Non-reentrant String Conversion.
(line 49)
* wcstoq: Parsing of Integers. (line 123)
* wcstoul: Parsing of Integers. (line 91)
* wcstoull: Parsing of Integers. (line 137)
* wcstoumax: Parsing of Integers. (line 184)
* wcstouq: Parsing of Integers. (line 148)
* wcswcs: Search Functions. (line 161)
* wcsxfrm: Collation Functions. (line 107)
* wctob: Converting a Character.
(line 65)
* wctomb: Non-reentrant Character Conversion.
(line 38)
* wctrans: Wide Character Case Conversion.
(line 20)
* wctype: Classification of Wide Characters.
(line 37)
* WEXITSTATUS: Process Completion Status.
(line 17)
* WIFEXITED: Process Completion Status.
(line 13)
* WIFSIGNALED: Process Completion Status.
(line 22)
* WIFSTOPPED: Process Completion Status.
(line 35)
* wmemchr: Search Functions. (line 18)
* wmemcmp: String/Array Comparison.
(line 35)
* wmemcpy: Copying and Concatenation.
(line 51)
* wmemmove: Copying and Concatenation.
(line 128)
* wmempcpy: Copying and Concatenation.
(line 95)
* wmemset: Copying and Concatenation.
(line 163)
* wordexp: Calling Wordexp. (line 41)
* wordfree: Calling Wordexp. (line 89)
* wprintf: Formatted Output Functions.
(line 20)
* write: I/O Primitives. (line 157)
* writev: Scatter-Gather. (line 47)
* wscanf: Formatted Input Functions.
(line 21)
* WSTOPSIG: Process Completion Status.
(line 38)
* WTERMSIG: Process Completion Status.
(line 27)
* y0: Special Functions. (line 86)
* y0f: Special Functions. (line 87)
* y0l: Special Functions. (line 88)
* y1: Special Functions. (line 94)
* y1f: Special Functions. (line 95)
* y1l: Special Functions. (line 96)
* yn: Special Functions. (line 102)
* ynf: Special Functions. (line 103)
* ynl: Special Functions. (line 104)

File: libc.info, Node: Variable Index, Next: File Index, Prev: Function Index, Up: Top
Variable and Constant Macro Index
*********************************
�[index�]
* Menu:
* (: Error Messages. (line 207)
* (*__gconv_end_fct): glibc iconv Implementation.
(line 560)
* (*__gconv_fct): glibc iconv Implementation.
(line 580)
* (*__gconv_init_fct): glibc iconv Implementation.
(line 404)
* __free_hook: Hooks for Malloc. (line 36)
* __malloc_hook: Hooks for Malloc. (line 14)
* __malloc_initialize_hook: Hooks for Malloc. (line 66)
* __memalign_hook: Hooks for Malloc. (line 47)
* __realloc_hook: Hooks for Malloc. (line 25)
* _BSD_SOURCE: Feature Test Macros. (line 71)
* _Complex_I: Complex Numbers. (line 18)
* _FILE_OFFSET_BITS: Feature Test Macros. (line 142)
* _GNU_SOURCE: Feature Test Macros. (line 174)
* _IOFBF: Controlling Buffering.
(line 42)
* _IOLBF: Controlling Buffering.
(line 47)
* _IONBF: Controlling Buffering.
(line 52)
* _ISOC99_SOURCE: Feature Test Macros. (line 168)
* _LARGEFILE64_SOURCE: Feature Test Macros. (line 125)
* _LARGEFILE_SOURCE: Feature Test Macros. (line 114)
* _PATH_FSTAB: Mount Information. (line 29)
* _PATH_MNTTAB: Mount Information. (line 29)
* _PATH_MOUNTED: Mount Information. (line 29)
* _PATH_UTMP: Manipulating the Database.
(line 260)
* _PATH_WTMP: Manipulating the Database.
(line 263)
* _POSIX2_C_DEV: System Options. (line 42)
* _POSIX2_C_VERSION: Version Supported. (line 23)
* _POSIX2_FORT_DEV: System Options. (line 48)
* _POSIX2_FORT_RUN: System Options. (line 53)
* _POSIX2_LOCALEDEF: System Options. (line 59)
* _POSIX2_SW_DEV: System Options. (line 64)
* _POSIX_C_SOURCE: Feature Test Macros. (line 46)
* _POSIX_CHOWN_RESTRICTED: Options for Files. (line 27)
* _POSIX_JOB_CONTROL: System Options. (line 20)
* _POSIX_NO_TRUNC: Options for Files. (line 34)
* _POSIX_SAVED_IDS: System Options. (line 26)
* _POSIX_SOURCE: Feature Test Macros. (line 38)
* _POSIX_VDISABLE <1>: Options for Files. (line 39)
* _POSIX_VDISABLE: Special Characters. (line 22)
* _POSIX_VERSION: Version Supported. (line 7)
* _REENTRANT: Feature Test Macros. (line 193)
* _SC_2_C_DEV: Constants for Sysconf.
(line 241)
* _SC_2_FORT_DEV: Constants for Sysconf.
(line 245)
* _SC_2_FORT_RUN: Constants for Sysconf.
(line 249)
* _SC_2_LOCALEDEF: Constants for Sysconf.
(line 253)
* _SC_2_SW_DEV: Constants for Sysconf.
(line 257)
* _SC_2_VERSION: Constants for Sysconf.
(line 296)
* _SC_AIO_LISTIO_MAX: Constants for Sysconf.
(line 98)
* _SC_AIO_MAX: Constants for Sysconf.
(line 102)
* _SC_AIO_PRIO_DELTA_MAX: Constants for Sysconf.
(line 105)
* _SC_ARG_MAX: Constants for Sysconf.
(line 10)
* _SC_ASYNCHRONOUS_IO: Constants for Sysconf.
(line 58)
* _SC_ATEXIT_MAX: Constants for Sysconf.
(line 317)
* _SC_AVPHYS_PAGES <1>: Constants for Sysconf.
(line 314)
* _SC_AVPHYS_PAGES: Query Memory Parameters.
(line 49)
* _SC_BC_BASE_MAX: Constants for Sysconf.
(line 261)
* _SC_BC_DIM_MAX: Constants for Sysconf.
(line 264)
* _SC_BC_SCALE_MAX: Constants for Sysconf.
(line 267)
* _SC_BC_STRING_MAX: Constants for Sysconf.
(line 270)
* _SC_CHAR_BIT: Constants for Sysconf.
(line 358)
* _SC_CHAR_MAX: Constants for Sysconf.
(line 361)
* _SC_CHAR_MIN: Constants for Sysconf.
(line 365)
* _SC_CHARCLASS_NAME_MAX: Constants for Sysconf.
(line 41)
* _SC_CHILD_MAX: Constants for Sysconf.
(line 13)
* _SC_CLK_TCK: Constants for Sysconf.
(line 37)
* _SC_COLL_WEIGHTS_MAX: Constants for Sysconf.
(line 274)
* _SC_DELAYTIMER_MAX: Constants for Sysconf.
(line 110)
* _SC_EQUIV_CLASS_MAX: Constants for Sysconf.
(line 286)
* _SC_EXPR_NEST_MAX: Constants for Sysconf.
(line 278)
* _SC_FSYNC: Constants for Sysconf.
(line 70)
* _SC_GETGR_R_SIZE_MAX: Constants for Sysconf.
(line 186)
* _SC_GETPW_R_SIZE_MAX: Constants for Sysconf.
(line 190)
* _SC_INT_MAX: Constants for Sysconf.
(line 369)
* _SC_INT_MIN: Constants for Sysconf.
(line 373)
* _SC_JOB_CONTROL: Constants for Sysconf.
(line 28)
* _SC_LINE_MAX: Constants for Sysconf.
(line 282)
* _SC_LOGIN_NAME_MAX: Constants for Sysconf.
(line 194)
* _SC_LONG_BIT: Constants for Sysconf.
(line 377)
* _SC_MAPPED_FILES: Constants for Sysconf.
(line 73)
* _SC_MB_LEN_MAX: Constants for Sysconf.
(line 383)
* _SC_MEMLOCK: Constants for Sysconf.
(line 76)
* _SC_MEMLOCK_RANGE: Constants for Sysconf.
(line 79)
* _SC_MEMORY_PROTECTION: Constants for Sysconf.
(line 83)
* _SC_MESSAGE_PASSING: Constants for Sysconf.
(line 87)
* _SC_MQ_OPEN_MAX: Constants for Sysconf.
(line 114)
* _SC_MQ_PRIO_MAX: Constants for Sysconf.
(line 117)
* _SC_NGROUPS_MAX: Constants for Sysconf.
(line 25)
* _SC_NL_ARGMAX: Constants for Sysconf.
(line 427)
* _SC_NL_LANGMAX: Constants for Sysconf.
(line 430)
* _SC_NL_MSGMAX: Constants for Sysconf.
(line 433)
* _SC_NL_NMAX: Constants for Sysconf.
(line 436)
* _SC_NL_SETMAX: Constants for Sysconf.
(line 439)
* _SC_NL_TEXTMAX: Constants for Sysconf.
(line 442)
* _SC_NPROCESSORS_CONF <1>: Constants for Sysconf.
(line 305)
* _SC_NPROCESSORS_CONF: Processor Resources. (line 13)
* _SC_NPROCESSORS_ONLN <1>: Constants for Sysconf.
(line 308)
* _SC_NPROCESSORS_ONLN: Processor Resources. (line 19)
* _SC_NZERO: Constants for Sysconf.
(line 387)
* _SC_OPEN_MAX: Constants for Sysconf.
(line 16)
* _SC_PAGESIZE <1>: Constants for Sysconf.
(line 300)
* _SC_PAGESIZE <2>: Query Memory Parameters.
(line 29)
* _SC_PAGESIZE: Memory-mapped I/O. (line 29)
* _SC_PHYS_PAGES <1>: Constants for Sysconf.
(line 311)
* _SC_PHYS_PAGES: Query Memory Parameters.
(line 43)
* _SC_PII: Constants for Sysconf.
(line 137)
* _SC_PII_INTERNET: Constants for Sysconf.
(line 146)
* _SC_PII_INTERNET_DGRAM: Constants for Sysconf.
(line 162)
* _SC_PII_INTERNET_STREAM: Constants for Sysconf.
(line 158)
* _SC_PII_OSI: Constants for Sysconf.
(line 149)
* _SC_PII_OSI_CLTS: Constants for Sysconf.
(line 169)
* _SC_PII_OSI_COTS: Constants for Sysconf.
(line 166)
* _SC_PII_OSI_M: Constants for Sysconf.
(line 172)
* _SC_PII_SOCKET: Constants for Sysconf.
(line 143)
* _SC_PII_XTI: Constants for Sysconf.
(line 140)
* _SC_PRIORITIZED_IO: Constants for Sysconf.
(line 62)
* _SC_PRIORITY_SCHEDULING: Constants for Sysconf.
(line 51)
* _SC_REALTIME_SIGNALS: Constants for Sysconf.
(line 47)
* _SC_RTSIG_MAX: Constants for Sysconf.
(line 120)
* _SC_SAVED_IDS: Constants for Sysconf.
(line 31)
* _SC_SCHAR_MAX: Constants for Sysconf.
(line 395)
* _SC_SCHAR_MIN: Constants for Sysconf.
(line 399)
* _SC_SELECT: Constants for Sysconf.
(line 152)
* _SC_SEM_NSEMS_MAX: Constants for Sysconf.
(line 123)
* _SC_SEM_VALUE_MAX: Constants for Sysconf.
(line 127)
* _SC_SEMAPHORES: Constants for Sysconf.
(line 91)
* _SC_SHARED_MEMORY_OBJECTS: Constants for Sysconf.
(line 94)
* _SC_SHRT_MAX: Constants for Sysconf.
(line 403)
* _SC_SHRT_MIN: Constants for Sysconf.
(line 407)
* _SC_SIGQUEUE_MAX: Constants for Sysconf.
(line 131)
* _SC_STREAM_MAX: Constants for Sysconf.
(line 19)
* _SC_SYNCHRONIZED_IO: Constants for Sysconf.
(line 66)
* _SC_T_IOV_MAX: Constants for Sysconf.
(line 175)
* _SC_THREAD_ATTR_STACKADDR: Constants for Sysconf.
(line 217)
* _SC_THREAD_ATTR_STACKSIZE: Constants for Sysconf.
(line 221)
* _SC_THREAD_DESTRUCTOR_ITERATIONS: Constants for Sysconf.
(line 201)
* _SC_THREAD_KEYS_MAX: Constants for Sysconf.
(line 205)
* _SC_THREAD_PRIO_INHERIT: Constants for Sysconf.
(line 229)
* _SC_THREAD_PRIO_PROTECT: Constants for Sysconf.
(line 233)
* _SC_THREAD_PRIORITY_SCHEDULING: Constants for Sysconf.
(line 225)
* _SC_THREAD_PROCESS_SHARED: Constants for Sysconf.
(line 237)
* _SC_THREAD_SAFE_FUNCTIONS: Constants for Sysconf.
(line 182)
* _SC_THREAD_STACK_MIN: Constants for Sysconf.
(line 209)
* _SC_THREAD_THREADS_MAX: Constants for Sysconf.
(line 213)
* _SC_THREADS: Constants for Sysconf.
(line 179)
* _SC_TIMER_MAX: Constants for Sysconf.
(line 134)
* _SC_TIMERS: Constants for Sysconf.
(line 55)
* _SC_TTY_NAME_MAX: Constants for Sysconf.
(line 198)
* _SC_TZNAME_MAX: Constants for Sysconf.
(line 22)
* _SC_UCHAR_MAX: Constants for Sysconf.
(line 411)
* _SC_UINT_MAX: Constants for Sysconf.
(line 415)
* _SC_UIO_MAXIOV: Constants for Sysconf.
(line 155)
* _SC_ULONG_MAX: Constants for Sysconf.
(line 419)
* _SC_USHRT_MAX: Constants for Sysconf.
(line 423)
* _SC_VERSION: Constants for Sysconf.
(line 34)
* _SC_WORD_BIT: Constants for Sysconf.
(line 380)
* _SC_XOPEN_CRYPT: Constants for Sysconf.
(line 340)
* _SC_XOPEN_ENH_I18N: Constants for Sysconf.
(line 343)
* _SC_XOPEN_LEGACY: Constants for Sysconf.
(line 337)
* _SC_XOPEN_REALTIME: Constants for Sysconf.
(line 330)
* _SC_XOPEN_REALTIME_THREADS: Constants for Sysconf.
(line 333)
* _SC_XOPEN_SHM: Constants for Sysconf.
(line 346)
* _SC_XOPEN_UNIX: Constants for Sysconf.
(line 327)
* _SC_XOPEN_VERSION: Constants for Sysconf.
(line 321)
* _SC_XOPEN_XCU_VERSION: Constants for Sysconf.
(line 324)
* _SC_XOPEN_XPG2: Constants for Sysconf.
(line 349)
* _SC_XOPEN_XPG3: Constants for Sysconf.
(line 352)
* _SC_XOPEN_XPG4: Constants for Sysconf.
(line 355)
* _SVID_SOURCE: Feature Test Macros. (line 91)
* _THREAD_SAFE: Feature Test Macros. (line 194)
* _XOPEN_SOURCE: Feature Test Macros. (line 96)
* _XOPEN_SOURCE_EXTENDED: Feature Test Macros. (line 97)
* ABDAY_1: The Elegant and Fast Way.
(line 31)
* ABDAY_2: The Elegant and Fast Way.
(line 32)
* ABDAY_3: The Elegant and Fast Way.
(line 33)
* ABDAY_4: The Elegant and Fast Way.
(line 34)
* ABDAY_5: The Elegant and Fast Way.
(line 35)
* ABDAY_6: The Elegant and Fast Way.
(line 36)
* ABDAY_7: The Elegant and Fast Way.
(line 37)
* ABMON_1: The Elegant and Fast Way.
(line 51)
* ABMON_10: The Elegant and Fast Way.
(line 60)
* ABMON_11: The Elegant and Fast Way.
(line 61)
* ABMON_12: The Elegant and Fast Way.
(line 62)
* ABMON_2: The Elegant and Fast Way.
(line 52)
* ABMON_3: The Elegant and Fast Way.
(line 53)
* ABMON_4: The Elegant and Fast Way.
(line 54)
* ABMON_5: The Elegant and Fast Way.
(line 55)
* ABMON_6: The Elegant and Fast Way.
(line 56)
* ABMON_7: The Elegant and Fast Way.
(line 57)
* ABMON_8: The Elegant and Fast Way.
(line 58)
* ABMON_9: The Elegant and Fast Way.
(line 59)
* ACCOUNTING: Manipulating the Database.
(line 102)
* AF_FILE: Address Formats. (line 54)
* AF_INET: Address Formats. (line 58)
* AF_LOCAL: Address Formats. (line 41)
* AF_UNIX: Address Formats. (line 47)
* AF_UNSPEC: Address Formats. (line 67)
* aliases: NSS Basics. (line 26)
* ALT_DIGITS: The Elegant and Fast Way.
(line 149)
* ALTWERASE: Local Modes. (line 119)
* AM_STR: The Elegant and Fast Way.
(line 82)
* ARG_MAX: General Limits. (line 25)
* argp_err_exit_status: Argp Global Variables.
(line 42)
* ARGP_ERR_UNKNOWN: Argp Parser Functions.
(line 46)
* ARGP_HELP_BUG_ADDR: Argp Help Flags. (line 38)
* ARGP_HELP_DOC: Argp Help Flags. (line 35)
* ARGP_HELP_EXIT_ERR: Argp Help Flags. (line 49)
* ARGP_HELP_EXIT_OK: Argp Help Flags. (line 52)
* ARGP_HELP_LONG: Argp Help Flags. (line 23)
* ARGP_HELP_LONG_ONLY: Argp Help Flags. (line 42)
* ARGP_HELP_POST_DOC: Argp Help Flags. (line 31)
* ARGP_HELP_PRE_DOC: Argp Help Flags. (line 27)
* ARGP_HELP_SEE: Argp Help Flags. (line 19)
* ARGP_HELP_SHORT_USAGE: Argp Help Flags. (line 14)
* ARGP_HELP_STD_ERR: Argp Help Flags. (line 58)
* ARGP_HELP_STD_HELP: Argp Help Flags. (line 68)
* ARGP_HELP_STD_USAGE: Argp Help Flags. (line 63)
* ARGP_HELP_USAGE: Argp Help Flags. (line 11)
* ARGP_IN_ORDER: Argp Flags. (line 31)
* ARGP_KEY_ARG: Argp Special Keys. (line 11)
* ARGP_KEY_ARGS: Argp Special Keys. (line 30)
* ARGP_KEY_END: Argp Special Keys. (line 56)
* ARGP_KEY_ERROR: Argp Special Keys. (line 78)
* ARGP_KEY_FINI: Argp Special Keys. (line 82)
* ARGP_KEY_HELP_ARGS_DOC: Argp Help Filter Keys.
(line 27)
* ARGP_KEY_HELP_DUP_ARGS_NOTE: Argp Help Filter Keys.
(line 23)
* ARGP_KEY_HELP_EXTRA: Argp Help Filter Keys.
(line 19)
* ARGP_KEY_HELP_HEADER: Argp Help Filter Keys.
(line 16)
* ARGP_KEY_HELP_POST_DOC: Argp Help Filter Keys.
(line 13)
* ARGP_KEY_HELP_PRE_DOC: Argp Help Filter Keys.
(line 10)
* ARGP_KEY_INIT: Argp Special Keys. (line 68)
* ARGP_KEY_NO_ARGS: Argp Special Keys. (line 61)
* ARGP_KEY_SUCCESS: Argp Special Keys. (line 74)
* ARGP_LONG_ONLY: Argp Flags. (line 45)
* ARGP_NO_ARGS: Argp Flags. (line 24)
* ARGP_NO_ERRS: Argp Flags. (line 17)
* ARGP_NO_EXIT: Argp Flags. (line 41)
* ARGP_NO_HELP: Argp Flags. (line 36)
* ARGP_PARSE_ARGV0: Argp Flags. (line 11)
* argp_program_bug_address: Argp Global Variables.
(line 17)
* argp_program_version: Argp Global Variables.
(line 11)
* argp_program_version_hook: Argp Global Variables.
(line 23)
* ARGP_SILENT: Argp Flags. (line 52)
* B0: Line Speed. (line 79)
* B110: Line Speed. (line 79)
* B115200: Line Speed. (line 79)
* B1200: Line Speed. (line 79)
* B134: Line Speed. (line 79)
* B150: Line Speed. (line 79)
* B1800: Line Speed. (line 79)
* B19200: Line Speed. (line 79)
* B200: Line Speed. (line 79)
* B230400: Line Speed. (line 79)
* B2400: Line Speed. (line 79)
* B300: Line Speed. (line 79)
* B38400: Line Speed. (line 79)
* B460800: Line Speed. (line 79)
* B4800: Line Speed. (line 79)
* B50: Line Speed. (line 79)
* B57600: Line Speed. (line 79)
* B600: Line Speed. (line 79)
* B75: Line Speed. (line 79)
* B9600: Line Speed. (line 79)
* BC_BASE_MAX: Utility Limits. (line 16)
* BC_DIM_MAX: Utility Limits. (line 20)
* BC_SCALE_MAX: Utility Limits. (line 24)
* BC_STRING_MAX: Utility Limits. (line 28)
* BOOT_TIME <1>: XPG Functions. (line 48)
* BOOT_TIME: Manipulating the Database.
(line 78)
* BRKINT: Input Modes. (line 63)
* BUFSIZ: Controlling Buffering.
(line 57)
* CCTS_OFLOW: Control Modes. (line 84)
* CHAR_MAX: Range of Type. (line 36)
* CHAR_MIN: Range of Type. (line 32)
* CHILD_MAX: General Limits. (line 29)
* CIGNORE: Control Modes. (line 95)
* CLK_TCK: Processor Time. (line 43)
* CLOCAL: Control Modes. (line 19)
* CLOCKS_PER_SEC: CPU Time. (line 34)
* CODESET: The Elegant and Fast Way.
(line 27)
* COLL_WEIGHTS_MAX: Utility Limits. (line 32)
* COREFILE: Program Error Signals.
(line 32)
* CPU_SETSIZE: CPU Affinity. (line 58)
* CREAD: Control Modes. (line 41)
* CRNCYSTR: The Elegant and Fast Way.
(line 163)
* CRTS_IFLOW: Control Modes. (line 88)
* CS5: Control Modes. (line 69)
* CS6: Control Modes. (line 72)
* CS7: Control Modes. (line 75)
* CS8: Control Modes. (line 78)
* CSIZE: Control Modes. (line 66)
* CSTOPB: Control Modes. (line 45)
* CURRENCY_SYMBOL: The Elegant and Fast Way.
(line 162)
* D_FMT: The Elegant and Fast Way.
(line 97)
* D_T_FMT: The Elegant and Fast Way.
(line 92)
* DAY_1: The Elegant and Fast Way.
(line 41)
* DAY_2: The Elegant and Fast Way.
(line 42)
* DAY_3: The Elegant and Fast Way.
(line 43)
* DAY_4: The Elegant and Fast Way.
(line 44)
* DAY_5: The Elegant and Fast Way.
(line 45)
* DAY_6: The Elegant and Fast Way.
(line 46)
* DAY_7: The Elegant and Fast Way.
(line 47)
* daylight: Time Zone Functions. (line 53)
* DBL_DIG: Floating Point Parameters.
(line 99)
* DBL_EPSILON: Floating Point Parameters.
(line 176)
* DBL_MANT_DIG: Floating Point Parameters.
(line 81)
* DBL_MAX: Floating Point Parameters.
(line 154)
* DBL_MAX_10_EXP: Floating Point Parameters.
(line 142)
* DBL_MAX_EXP: Floating Point Parameters.
(line 132)
* DBL_MIN: Floating Point Parameters.
(line 165)
* DBL_MIN_10_EXP: Floating Point Parameters.
(line 121)
* DBL_MIN_EXP: Floating Point Parameters.
(line 111)
* DEAD_PROCESS <1>: XPG Functions. (line 69)
* DEAD_PROCESS: Manipulating the Database.
(line 99)
* DECIMAL_POINT: The Elegant and Fast Way.
(line 245)
* DES_DECRYPT: DES Encryption. (line 81)
* DES_ENCRYPT: DES Encryption. (line 77)
* DES_HW: DES Encryption. (line 85)
* DES_SW: DES Encryption. (line 90)
* DESERR_BADPARAM: DES Encryption. (line 106)
* DESERR_HWERROR: DES Encryption. (line 103)
* DESERR_NOHWDEVICE: DES Encryption. (line 99)
* DESERR_NONE: DES Encryption. (line 96)
* DT_BLK: Directory Entries. (line 57)
* DT_CHR: Directory Entries. (line 54)
* DT_DIR: Directory Entries. (line 45)
* DT_FIFO: Directory Entries. (line 48)
* DT_LNK: Directory Entries. (line 60)
* DT_REG: Directory Entries. (line 42)
* DT_SOCK: Directory Entries. (line 51)
* DT_UNKNOWN: Directory Entries. (line 37)
* E2BIG: Error Codes. (line 44)
* EACCES: Error Codes. (line 75)
* EADDRINUSE: Error Codes. (line 272)
* EADDRNOTAVAIL: Error Codes. (line 276)
* EADV: Error Codes. (line 533)
* EAFNOSUPPORT: Error Codes. (line 267)
* EAGAIN: Error Codes. (line 181)
* EALREADY: Error Codes. (line 227)
* EAUTH: Error Codes. (line 407)
* EBACKGROUND: Error Codes. (line 439)
* EBADE: Error Codes. (line 513)
* EBADF <1>: Line Control. (line 119)
* EBADF: Error Codes. (line 54)
* EBADFD: Error Codes. (line 543)
* EBADMSG: Error Codes. (line 464)
* EBADR: Error Codes. (line 515)
* EBADRPC: Error Codes. (line 379)
* EBADRQC: Error Codes. (line 521)
* EBADSLT: Error Codes. (line 523)
* EBFONT: Error Codes. (line 527)
* EBUSY: Error Codes. (line 88)
* ECANCELED: Error Codes. (line 486)
* ECHILD: Error Codes. (line 59)
* ECHO: Local Modes. (line 23)
* ECHOCTL: Local Modes. (line 73)
* ECHOE: Local Modes. (line 27)
* ECHOK: Local Modes. (line 48)
* ECHOKE: Local Modes. (line 62)
* ECHONL: Local Modes. (line 68)
* ECHOPRT: Local Modes. (line 37)
* ECHRNG: Error Codes. (line 497)
* ECOMM: Error Codes. (line 537)
* ECONNABORTED: Error Codes. (line 291)
* ECONNREFUSED: Error Codes. (line 330)
* ECONNRESET: Error Codes. (line 294)
* ED: Error Codes. (line 452)
* EDEADLK: Error Codes. (line 64)
* EDEADLOCK: Error Codes. (line 525)
* EDESTADDRREQ: Error Codes. (line 314)
* EDIED: Error Codes. (line 447)
* EDOM: Error Codes. (line 172)
* EDOTDOT: Error Codes. (line 539)
* EDQUOT: Error Codes. (line 363)
* EEXIST: Error Codes. (line 93)
* EFAULT: Error Codes. (line 79)
* EFBIG: Error Codes. (line 146)
* EFTYPE: Error Codes. (line 400)
* EGRATUITOUS: Error Codes. (line 461)
* EGREGIOUS: Error Codes. (line 455)
* EHOSTDOWN: Error Codes. (line 343)
* EHOSTUNREACH: Error Codes. (line 346)
* EHWPOISON: Error Codes. (line 587)
* EIDRM: Error Codes. (line 466)
* EIEIO: Error Codes. (line 458)
* EILSEQ: Error Codes. (line 434)
* EINPROGRESS: Error Codes. (line 217)
* EINTR: Error Codes. (line 25)
* EINVAL <1>: Line Control. (line 125)
* EINVAL: Error Codes. (line 115)
* EIO: Error Codes. (line 34)
* EISCONN: Error Codes. (line 304)
* EISDIR: Error Codes. (line 111)
* EISNAM: Error Codes. (line 565)
* EKEYEXPIRED: Error Codes. (line 575)
* EKEYREJECTED: Error Codes. (line 579)
* EKEYREVOKED: Error Codes. (line 577)
* EL2HLT: Error Codes. (line 511)
* EL2NSYNC: Error Codes. (line 499)
* EL3HLT: Error Codes. (line 501)
* EL3RST: Error Codes. (line 503)
* ELIBACC: Error Codes. (line 547)
* ELIBBAD: Error Codes. (line 549)
* ELIBEXEC: Error Codes. (line 555)
* ELIBMAX: Error Codes. (line 553)
* ELIBSCN: Error Codes. (line 551)
* ELNRNG: Error Codes. (line 505)
* ELOOP: Error Codes. (line 334)
* EMEDIUMTYPE: Error Codes. (line 571)
* EMFILE: Error Codes. (line 119)
* EMLINK: Error Codes. (line 160)
* EMPTY <1>: XPG Functions. (line 41)
* EMPTY: Manipulating the Database.
(line 71)
* EMSGSIZE: Error Codes. (line 234)
* EMULTIHOP: Error Codes. (line 468)
* ENAMETOOLONG: Error Codes. (line 338)
* ENAVAIL: Error Codes. (line 563)
* ENEEDAUTH: Error Codes. (line 410)
* ENETDOWN: Error Codes. (line 281)
* ENETRESET: Error Codes. (line 288)
* ENETUNREACH: Error Codes. (line 284)
* ENFILE: Error Codes. (line 128)
* ENOANO: Error Codes. (line 519)
* ENOBUFS: Error Codes. (line 299)
* ENOCSI: Error Codes. (line 509)
* ENODATA: Error Codes. (line 470)
* ENODEV: Error Codes. (line 103)
* ENOENT: Error Codes. (line 17)
* ENOEXEC: Error Codes. (line 50)
* ENOKEY: Error Codes. (line 573)
* ENOLCK: Error Codes. (line 394)
* ENOLINK: Error Codes. (line 472)
* ENOMEDIUM: Error Codes. (line 569)
* ENOMEM: Error Codes. (line 71)
* ENOMSG: Error Codes. (line 474)
* ENONET: Error Codes. (line 529)
* ENOPKG: Error Codes. (line 531)
* ENOPROTOOPT: Error Codes. (line 242)
* ENOSPC: Error Codes. (line 150)
* ENOSR: Error Codes. (line 476)
* ENOSTR: Error Codes. (line 478)
* ENOSYS: Error Codes. (line 413)
* ENOTBLK: Error Codes. (line 83)
* ENOTCONN: Error Codes. (line 308)
* ENOTDIR: Error Codes. (line 107)
* ENOTEMPTY: Error Codes. (line 350)
* ENOTNAM: Error Codes. (line 561)
* ENOTRECOVERABLE: Error Codes. (line 583)
* ENOTSOCK: Error Codes. (line 231)
* ENOTSUP: Error Codes. (line 420)
* ENOTTY <1>: Line Control. (line 122)
* ENOTTY: Error Codes. (line 134)
* ENOTUNIQ: Error Codes. (line 541)
* environ: Environment Access. (line 111)
* ENXIO: Error Codes. (line 37)
* EOF: EOF and Errors. (line 16)
* EOPNOTSUPP: Error Codes. (line 255)
* EOVERFLOW: Error Codes. (line 480)
* EOWNERDEAD: Error Codes. (line 581)
* EPERM: Error Codes. (line 12)
* EPFNOSUPPORT: Error Codes. (line 263)
* EPIPE: Error Codes. (line 165)
* EPROCLIM: Error Codes. (line 355)
* EPROCUNAVAIL: Error Codes. (line 391)
* EPROGMISMATCH: Error Codes. (line 388)
* EPROGUNAVAIL: Error Codes. (line 385)
* EPROTO: Error Codes. (line 482)
* EPROTONOSUPPORT: Error Codes. (line 247)
* EPROTOTYPE: Error Codes. (line 238)
* EQUIV_CLASS_MAX: Utility Limits. (line 47)
* ERA: The Elegant and Fast Way.
(line 113)
* ERA_D_FMT: The Elegant and Fast Way.
(line 139)
* ERA_D_T_FMT: The Elegant and Fast Way.
(line 134)
* ERA_T_FMT: The Elegant and Fast Way.
(line 144)
* ERA_YEAR: The Elegant and Fast Way.
(line 129)
* ERANGE: Error Codes. (line 177)
* EREMCHG: Error Codes. (line 545)
* EREMOTE: Error Codes. (line 373)
* EREMOTEIO: Error Codes. (line 567)
* ERESTART: Error Codes. (line 495)
* ERFKILL: Error Codes. (line 585)
* EROFS: Error Codes. (line 157)
* ERPCMISMATCH: Error Codes. (line 382)
* errno: Checking for Errors. (line 15)
* error_message_count: Error Messages. (line 218)
* error_one_per_line: Error Messages. (line 223)
* ESHUTDOWN: Error Codes. (line 320)
* ESOCKTNOSUPPORT: Error Codes. (line 252)
* ESPIPE: Error Codes. (line 154)
* ESRCH: Error Codes. (line 22)
* ESRMNT: Error Codes. (line 535)
* ESTALE: Error Codes. (line 366)
* ESTRPIPE: Error Codes. (line 557)
* ethers: NSS Basics. (line 29)
* ETIME: Error Codes. (line 484)
* ETIMEDOUT: Error Codes. (line 326)
* ETOOMANYREFS: Error Codes. (line 323)
* ETXTBSY: Error Codes. (line 138)
* EUCLEAN: Error Codes. (line 559)
* EUNATCH: Error Codes. (line 507)
* EUSERS: Error Codes. (line 360)
* EWOULDBLOCK: Error Codes. (line 210)
* EXDEV: Error Codes. (line 97)
* EXFULL: Error Codes. (line 517)
* EXIT_FAILURE: Exit Status. (line 54)
* EXIT_SUCCESS: Exit Status. (line 46)
* EXPR_NEST_MAX: Utility Limits. (line 36)
* EXTA: Line Speed. (line 84)
* EXTB: Line Speed. (line 84)
* F_DUPFD: Duplicating Descriptors.
(line 46)
* F_GETFD: Descriptor Flags. (line 19)
* F_GETFL: Getting File Status Flags.
(line 9)
* F_GETLK: File Locks. (line 66)
* F_GETOWN: Interrupt Input. (line 23)
* F_OK: Testing File Access. (line 85)
* F_RDLCK: File Locks. (line 179)
* F_SETFD: Descriptor Flags. (line 35)
* F_SETFL: Getting File Status Flags.
(line 25)
* F_SETLK: File Locks. (line 104)
* F_SETLKW: File Locks. (line 153)
* F_SETOWN: Interrupt Input. (line 38)
* F_UNLCK: File Locks. (line 185)
* F_WRLCK: File Locks. (line 182)
* FD_CLOEXEC: Descriptor Flags. (line 52)
* FD_SETSIZE: Waiting for I/O. (line 39)
* FE_DFL_ENV: Control Functions. (line 49)
* FE_DIVBYZERO: Status bit operations.
(line 20)
* FE_DOWNWARD: Rounding. (line 45)
* FE_INEXACT: Status bit operations.
(line 17)
* FE_INVALID: Status bit operations.
(line 29)
* FE_NOMASK_ENV: Control Functions. (line 55)
* FE_OVERFLOW: Status bit operations.
(line 26)
* FE_TONEAREST: Rounding. (line 39)
* FE_TOWARDZERO: Rounding. (line 48)
* FE_UNDERFLOW: Status bit operations.
(line 23)
* FE_UPWARD: Rounding. (line 42)
* FILENAME_MAX: Limits for Files. (line 64)
* FLT_DIG: Floating Point Parameters.
(line 87)
* FLT_EPSILON: Floating Point Parameters.
(line 171)
* FLT_MANT_DIG: Floating Point Parameters.
(line 69)
* FLT_MAX: Floating Point Parameters.
(line 147)
* FLT_MAX_10_EXP: Floating Point Parameters.
(line 137)
* FLT_MAX_EXP: Floating Point Parameters.
(line 126)
* FLT_MIN: Floating Point Parameters.
(line 160)
* FLT_MIN_10_EXP: Floating Point Parameters.
(line 116)
* FLT_MIN_EXP: Floating Point Parameters.
(line 105)
* FLT_RADIX: Floating Point Parameters.
(line 63)
* FLT_ROUNDS: Floating Point Parameters.
(line 28)
* FLUSHO: Local Modes. (line 133)
* FOPEN_MAX: Opening Streams. (line 139)
* FP_FAST_FMA: Misc FP Arithmetic. (line 54)
* FP_ILOGB0: Exponents and Logarithms.
(line 79)
* FP_ILOGBNAN: Exponents and Logarithms.
(line 85)
* FP_INFINITE: Floating Point Classes.
(line 17)
* FP_NAN: Floating Point Classes.
(line 13)
* FP_NORMAL: Floating Point Classes.
(line 34)
* FP_SUBNORMAL: Floating Point Classes.
(line 26)
* FP_ZERO: Floating Point Classes.
(line 21)
* FPE_DECOVF_TRAP: Program Error Signals.
(line 89)
* FPE_FLTDIV_TRAP: Program Error Signals.
(line 82)
* FPE_FLTOVF_TRAP: Program Error Signals.
(line 79)
* FPE_FLTUND_TRAP: Program Error Signals.
(line 85)
* FPE_INTDIV_TRAP: Program Error Signals.
(line 73)
* FPE_INTOVF_TRAP: Program Error Signals.
(line 69)
* FPE_SUBRNG_TRAP: Program Error Signals.
(line 76)
* FRAC_DIGITS: The Elegant and Fast Way.
(line 193)
* FSETLOCKING_BYCALLER: Streams and Threads. (line 172)
* FSETLOCKING_INTERNAL: Streams and Threads. (line 167)
* FSETLOCKING_QUERY: Streams and Threads. (line 178)
* FSTAB: Mount Information. (line 29)
* FSTAB_RO: fstab. (line 58)
* FSTAB_RQ: fstab. (line 54)
* FSTAB_RW: fstab. (line 51)
* FSTAB_SW: fstab. (line 61)
* FSTAB_XX: fstab. (line 64)
* FTW_ACTIONRETVAL: Working with Directory Trees.
(line 224)
* FTW_CHDIR: Working with Directory Trees.
(line 211)
* FTW_D: Working with Directory Trees.
(line 36)
* FTW_DEPTH: Working with Directory Trees.
(line 217)
* FTW_DNR: Working with Directory Trees.
(line 43)
* FTW_DP: Working with Directory Trees.
(line 75)
* FTW_F: Working with Directory Trees.
(line 31)
* FTW_MOUNT: Working with Directory Trees.
(line 206)
* FTW_NS: Working with Directory Trees.
(line 39)
* FTW_PHYS: Working with Directory Trees.
(line 199)
* FTW_SL: Working with Directory Trees.
(line 46)
* FTW_SLN: Working with Directory Trees.
(line 75)
* getdate_err: General Time String Parsing.
(line 14)
* GLOB_ABORTED: Calling Glob. (line 202)
* GLOB_ALTDIRFUNC: More Flags for Globbing.
(line 21)
* GLOB_APPEND: Flags for Globbing. (line 13)
* GLOB_BRACE: More Flags for Globbing.
(line 29)
* GLOB_DOOFFS: Flags for Globbing. (line 30)
* GLOB_ERR: Flags for Globbing. (line 35)
* GLOB_MAGCHAR: More Flags for Globbing.
(line 15)
* GLOB_MARK: Flags for Globbing. (line 58)
* GLOB_NOCHECK: Flags for Globbing. (line 62)
* GLOB_NOESCAPE: Flags for Globbing. (line 68)
* GLOB_NOMAGIC: More Flags for Globbing.
(line 58)
* GLOB_NOMATCH: Calling Glob. (line 208)
* GLOB_NOSORT: Flags for Globbing. (line 81)
* GLOB_NOSPACE: Calling Glob. (line 214)
* GLOB_ONLYDIR: More Flags for Globbing.
(line 104)
* GLOB_PERIOD: More Flags for Globbing.
(line 11)
* GLOB_TILDE: More Flags for Globbing.
(line 63)
* GLOB_TILDE_CHECK: More Flags for Globbing.
(line 94)
* group: NSS Basics. (line 32)
* GROUPING: The Elegant and Fast Way.
(line 260)
* h_errno: Host Names. (line 87)
* HOST_NOT_FOUND: Host Names. (line 95)
* hosts: NSS Basics. (line 35)
* HUGE_VAL: Math Error Reporting.
(line 36)
* HUGE_VALF: Math Error Reporting.
(line 37)
* HUGE_VALL: Math Error Reporting.
(line 38)
* HUPCL: Control Modes. (line 36)
* I: Complex Numbers. (line 32)
* ICANON: Local Modes. (line 18)
* ICRNL: Input Modes. (line 80)
* IEXTEN: Local Modes. (line 99)
* IFNAMSIZ: Interface Naming. (line 21)
* IGNBRK: Input Modes. (line 56)
* IGNCR: Input Modes. (line 74)
* IGNPAR: Input Modes. (line 34)
* IMAXBEL: Input Modes. (line 115)
* in6addr_any: Host Address Data Type.
(line 63)
* in6addr_loopback: Host Address Data Type.
(line 57)
* INADDR_ANY: Host Address Data Type.
(line 40)
* INADDR_BROADCAST: Host Address Data Type.
(line 46)
* INADDR_LOOPBACK: Host Address Data Type.
(line 31)
* INADDR_NONE: Host Address Data Type.
(line 49)
* INFINITY: Infinity and NaN. (line 40)
* INIT_PROCESS <1>: XPG Functions. (line 58)
* INIT_PROCESS: Manipulating the Database.
(line 88)
* INLCR: Input Modes. (line 85)
* INPCK: Input Modes. (line 17)
* INT_CURR_SYMBOL: The Elegant and Fast Way.
(line 158)
* INT_FRAC_DIGITS: The Elegant and Fast Way.
(line 189)
* INT_MAX: Range of Type. (line 56)
* INT_MIN: Range of Type. (line 51)
* INT_N_CS_PRECEDES: The Elegant and Fast Way.
(line 229)
* INT_N_SEP_BY_SPACE: The Elegant and Fast Way.
(line 233)
* INT_N_SIGN_POSN: The Elegant and Fast Way.
(line 241)
* INT_P_CS_PRECEDES: The Elegant and Fast Way.
(line 221)
* INT_P_SEP_BY_SPACE: The Elegant and Fast Way.
(line 225)
* INT_P_SIGN_POSN: The Elegant and Fast Way.
(line 237)
* IPPORT_RESERVED: Ports. (line 38)
* IPPORT_USERRESERVED: Ports. (line 42)
* ISIG: Local Modes. (line 83)
* ISTRIP: Input Modes. (line 52)
* ITIMER_PROF: Setting an Alarm. (line 98)
* ITIMER_REAL: Setting an Alarm. (line 90)
* ITIMER_VIRTUAL: Setting an Alarm. (line 94)
* IXANY: Input Modes. (line 107)
* IXOFF: Input Modes. (line 90)
* IXON: Input Modes. (line 99)
* L_ctermid: Identifying the Terminal.
(line 28)
* L_cuserid: Who Logged In. (line 37)
* L_INCR: File Positioning. (line 148)
* L_SET: File Positioning. (line 145)
* L_tmpnam: Temporary Files. (line 77)
* L_XTND: File Positioning. (line 151)
* LANG: Locale Categories. (line 49)
* LANGUAGE: Locale Categories. (line 54)
* LC_ALL: Locale Categories. (line 43)
* LC_COLLATE: Locale Categories. (line 16)
* LC_CTYPE: Locale Categories. (line 20)
* LC_MESSAGES: Locale Categories. (line 37)
* LC_MONETARY: Locale Categories. (line 25)
* LC_NUMERIC: Locale Categories. (line 29)
* LC_TIME: Locale Categories. (line 33)
* LDBL_DIG: Floating Point Parameters.
(line 100)
* LDBL_EPSILON: Floating Point Parameters.
(line 177)
* LDBL_MANT_DIG: Floating Point Parameters.
(line 82)
* LDBL_MAX: Floating Point Parameters.
(line 155)
* LDBL_MAX_10_EXP: Floating Point Parameters.
(line 143)
* LDBL_MAX_EXP: Floating Point Parameters.
(line 133)
* LDBL_MIN: Floating Point Parameters.
(line 166)
* LDBL_MIN_10_EXP: Floating Point Parameters.
(line 122)
* LDBL_MIN_EXP: Floating Point Parameters.
(line 112)
* LINE_MAX: Utility Limits. (line 40)
* LINK_MAX: Limits for Files. (line 25)
* LIO_NOP: Asynchronous I/O. (line 94)
* LIO_READ: Asynchronous I/O. (line 84)
* LIO_WRITE: Asynchronous I/O. (line 89)
* LLONG_MAX: Range of Type. (line 76)
* LLONG_MIN: Range of Type. (line 71)
* LOCPATH: Locale Names. (line 60)
* LOG_ALERT: syslog; vsyslog. (line 97)
* LOG_AUTH: syslog; vsyslog. (line 32)
* LOG_AUTHPRIV: syslog; vsyslog. (line 50)
* LOG_CRIT: syslog; vsyslog. (line 100)
* LOG_CRON: syslog; vsyslog. (line 47)
* LOG_DAEMON: syslog; vsyslog. (line 29)
* LOG_DEBUG: syslog; vsyslog. (line 115)
* LOG_EMERG: syslog; vsyslog. (line 94)
* LOG_ERR: syslog; vsyslog. (line 103)
* LOG_FTP: syslog; vsyslog. (line 53)
* LOG_INFO: syslog; vsyslog. (line 112)
* LOG_LOCAL0: syslog; vsyslog. (line 56)
* LOG_LOCAL1: syslog; vsyslog. (line 59)
* LOG_LOCAL2: syslog; vsyslog. (line 62)
* LOG_LOCAL3: syslog; vsyslog. (line 65)
* LOG_LOCAL4: syslog; vsyslog. (line 68)
* LOG_LOCAL5: syslog; vsyslog. (line 71)
* LOG_LOCAL6: syslog; vsyslog. (line 74)
* LOG_LOCAL7: syslog; vsyslog. (line 77)
* LOG_LPR: syslog; vsyslog. (line 38)
* LOG_MAIL: syslog; vsyslog. (line 26)
* LOG_NEWS: syslog; vsyslog. (line 41)
* LOG_NOTICE: syslog; vsyslog. (line 109)
* LOG_SYSLOG: syslog; vsyslog. (line 35)
* LOG_USER: syslog; vsyslog. (line 23)
* LOG_UUCP: syslog; vsyslog. (line 44)
* LOG_WARNING: syslog; vsyslog. (line 106)
* LOGIN_PROCESS <1>: XPG Functions. (line 62)
* LOGIN_PROCESS: Manipulating the Database.
(line 92)
* LONG_LONG_MAX: Range of Type. (line 82)
* LONG_LONG_MIN: Range of Type. (line 81)
* LONG_MAX: Range of Type. (line 66)
* LONG_MIN: Range of Type. (line 61)
* M_1_PI: Mathematical Constants.
(line 34)
* M_2_PI: Mathematical Constants.
(line 37)
* M_2_SQRTPI: Mathematical Constants.
(line 40)
* M_E: Mathematical Constants.
(line 10)
* M_LN10: Mathematical Constants.
(line 22)
* M_LN2: Mathematical Constants.
(line 19)
* M_LOG10E: Mathematical Constants.
(line 16)
* M_LOG2E: Mathematical Constants.
(line 13)
* M_PI: Mathematical Constants.
(line 25)
* M_PI_2: Mathematical Constants.
(line 28)
* M_PI_4: Mathematical Constants.
(line 31)
* M_SQRT1_2: Mathematical Constants.
(line 46)
* M_SQRT2: Mathematical Constants.
(line 43)
* MAP_ANON: Memory-mapped I/O. (line 88)
* MAP_ANONYMOUS: Memory-mapped I/O. (line 87)
* MAP_FIXED: Memory-mapped I/O. (line 83)
* MAP_PRIVATE: Memory-mapped I/O. (line 62)
* MAP_SHARED: Memory-mapped I/O. (line 73)
* MAX_CANON: Limits for Files. (line 29)
* MAX_INPUT: Limits for Files. (line 33)
* MAXNAMLEN: Limits for Files. (line 61)
* MAXSYMLINKS: Symbolic Links. (line 35)
* MB_CUR_MAX: Selecting the Conversion.
(line 25)
* MB_LEN_MAX: Selecting the Conversion.
(line 20)
* MDMBUF: Control Modes. (line 92)
* MINSIGSTKSZ: Signal Stack. (line 45)
* MM_APPL: Printing Formatted Messages.
(line 34)
* MM_CONSOLE: Printing Formatted Messages.
(line 14)
* MM_ERROR: Printing Formatted Messages.
(line 101)
* MM_FIRM: Printing Formatted Messages.
(line 27)
* MM_HALT: Printing Formatted Messages.
(line 98)
* MM_HARD: Printing Formatted Messages.
(line 21)
* MM_INFO: Printing Formatted Messages.
(line 107)
* MM_NOSEV: Printing Formatted Messages.
(line 95)
* MM_NRECOV: Printing Formatted Messages.
(line 49)
* MM_NULLACT: Printing Formatted Messages.
(line 82)
* MM_NULLLBL: Printing Formatted Messages.
(line 69)
* MM_NULLMC: Printing Formatted Messages.
(line 75)
* MM_NULLSEV: Printing Formatted Messages.
(line 72)
* MM_NULLTAG: Printing Formatted Messages.
(line 85)
* MM_NULLTXT: Printing Formatted Messages.
(line 79)
* MM_OPSYS: Printing Formatted Messages.
(line 40)
* MM_PRINT: Printing Formatted Messages.
(line 11)
* MM_RECOVER: Printing Formatted Messages.
(line 46)
* MM_SOFT: Printing Formatted Messages.
(line 24)
* MM_UTIL: Printing Formatted Messages.
(line 37)
* MM_WARNING: Printing Formatted Messages.
(line 104)
* MNTOPT_DEFAULTS: mtab. (line 62)
* MNTOPT_NOAUTO: mtab. (line 85)
* MNTOPT_NOSUID: mtab. (line 80)
* MNTOPT_RO: mtab. (line 67)
* MNTOPT_RW: mtab. (line 71)
* MNTOPT_SUID: mtab. (line 75)
* MNTTAB: Mount Information. (line 29)
* MNTTYPE_IGNORE: mtab. (line 33)
* MNTTYPE_NFS: mtab. (line 38)
* MNTTYPE_SWAP: mtab. (line 44)
* MON_1: The Elegant and Fast Way.
(line 66)
* MON_10: The Elegant and Fast Way.
(line 75)
* MON_11: The Elegant and Fast Way.
(line 76)
* MON_12: The Elegant and Fast Way.
(line 77)
* MON_2: The Elegant and Fast Way.
(line 67)
* MON_3: The Elegant and Fast Way.
(line 68)
* MON_4: The Elegant and Fast Way.
(line 69)
* MON_5: The Elegant and Fast Way.
(line 70)
* MON_6: The Elegant and Fast Way.
(line 71)
* MON_7: The Elegant and Fast Way.
(line 72)
* MON_8: The Elegant and Fast Way.
(line 73)
* MON_9: The Elegant and Fast Way.
(line 74)
* MON_DECIMAL_POINT: The Elegant and Fast Way.
(line 169)
* MON_GROUPING: The Elegant and Fast Way.
(line 177)
* MON_THOUSANDS_SEP: The Elegant and Fast Way.
(line 173)
* MOUNTED: Mount Information. (line 29)
* MS_ASYNC: Memory-mapped I/O. (line 177)
* MS_SYNC: Memory-mapped I/O. (line 172)
* MSG_DONTROUTE: Socket Data Options. (line 20)
* MSG_OOB: Socket Data Options. (line 12)
* MSG_PEEK: Socket Data Options. (line 15)
* N_CS_PRECEDES: The Elegant and Fast Way.
(line 205)
* N_SEP_BY_SPACE: The Elegant and Fast Way.
(line 209)
* N_SIGN_POSN: The Elegant and Fast Way.
(line 217)
* NAME_MAX: Limits for Files. (line 37)
* NAN: Infinity and NaN. (line 52)
* NCCS: Mode Data Types. (line 51)
* NDEBUG: Consistency Checking.
(line 15)
* NEGATIVE_SIGN: The Elegant and Fast Way.
(line 185)
* netgroup: NSS Basics. (line 38)
* networks: NSS Basics. (line 41)
* NEW_TIME <1>: XPG Functions. (line 55)
* NEW_TIME: Manipulating the Database.
(line 85)
* NGROUPS_MAX: General Limits. (line 51)
* NL_ARGMAX: Output Conversion Syntax.
(line 46)
* NO_ADDRESS: Host Names. (line 105)
* NO_RECOVERY: Host Names. (line 102)
* NOEXPR: The Elegant and Fast Way.
(line 270)
* NOFLSH: Local Modes. (line 106)
* NOKERNINFO: Local Modes. (line 138)
* NOSTR: The Elegant and Fast Way.
(line 286)
* NSIG: Standard Signals. (line 18)
* NSS_STATUS_NOTFOUND: NSS Modules Interface.
(line 36)
* NSS_STATUS_SUCCESS: NSS Modules Interface.
(line 39)
* NSS_STATUS_TRYAGAIN: NSS Modules Interface.
(line 30)
* NSS_STATUS_UNAVAIL: NSS Modules Interface.
(line 33)
* NULL: Null Pointer Constant.
(line 11)
* O_ACCMODE: Access Modes. (line 51)
* O_APPEND: Operating Modes. (line 11)
* O_ASYNC: Operating Modes. (line 43)
* O_CREAT: Open-time Flags. (line 22)
* O_EXCL: Open-time Flags. (line 25)
* O_EXEC: Access Modes. (line 41)
* O_EXLOCK: Open-time Flags. (line 104)
* O_FSYNC: Operating Modes. (line 50)
* O_IGNORE_CTTY: Open-time Flags. (line 60)
* O_NDELAY: Operating Modes. (line 35)
* O_NOATIME: Operating Modes. (line 58)
* O_NOCTTY: Open-time Flags. (line 45)
* O_NOLINK: Open-time Flags. (line 66)
* O_NONBLOCK <1>: Operating Modes. (line 23)
* O_NONBLOCK: Open-time Flags. (line 30)
* O_NOTRANS: Open-time Flags. (line 71)
* O_RDONLY: Access Modes. (line 12)
* O_RDWR: Access Modes. (line 18)
* O_READ: Access Modes. (line 33)
* O_SHLOCK: Open-time Flags. (line 96)
* O_SYNC: Operating Modes. (line 55)
* O_TRUNC: Open-time Flags. (line 80)
* O_WRITE: Access Modes. (line 37)
* O_WRONLY: Access Modes. (line 15)
* obstack_alloc_failed_handler: Preparing for Obstacks.
(line 56)
* OLD_TIME <1>: XPG Functions. (line 51)
* OLD_TIME: Manipulating the Database.
(line 81)
* ONLCR: Output Modes. (line 26)
* ONOEOT: Output Modes. (line 36)
* OPEN_MAX: General Limits. (line 35)
* OPOST: Output Modes. (line 16)
* optarg: Using Getopt. (line 31)
* opterr: Using Getopt. (line 10)
* optind: Using Getopt. (line 24)
* OPTION_ALIAS: Argp Option Flags. (line 16)
* OPTION_ARG_OPTIONAL: Argp Option Flags. (line 10)
* OPTION_DOC: Argp Option Flags. (line 22)
* OPTION_HIDDEN: Argp Option Flags. (line 13)
* OPTION_NO_USAGE: Argp Option Flags. (line 37)
* optopt: Using Getopt. (line 18)
* OXTABS: Output Modes. (line 30)
* P_CS_PRECEDES: The Elegant and Fast Way.
(line 197)
* P_SEP_BY_SPACE: The Elegant and Fast Way.
(line 201)
* P_SIGN_POSN: The Elegant and Fast Way.
(line 213)
* P_tmpdir: Temporary Files. (line 127)
* PA_CHAR: Parsing a Template String.
(line 48)
* PA_DOUBLE: Parsing a Template String.
(line 62)
* PA_FLAG_LONG: Parsing a Template String.
(line 86)
* PA_FLAG_LONG_DOUBLE: Parsing a Template String.
(line 94)
* PA_FLAG_LONG_LONG: Parsing a Template String.
(line 90)
* PA_FLAG_MASK: Parsing a Template String.
(line 37)
* PA_FLAG_PTR: Parsing a Template String.
(line 77)
* PA_FLAG_SHORT: Parsing a Template String.
(line 82)
* PA_FLOAT: Parsing a Template String.
(line 59)
* PA_INT: Parsing a Template String.
(line 45)
* PA_LAST: Parsing a Template String.
(line 65)
* PA_POINTER: Parsing a Template String.
(line 55)
* PA_STRING: Parsing a Template String.
(line 51)
* PARENB: Control Modes. (line 49)
* PARMRK: Input Modes. (line 38)
* PARODD: Control Modes. (line 58)
* passwd: NSS Basics. (line 47)
* PATH_MAX: Limits for Files. (line 44)
* PENDIN: Local Modes. (line 142)
* PF_CCITT: Misc Namespaces. (line 6)
* PF_FILE: Local Namespace Details.
(line 19)
* PF_IMPLINK: Misc Namespaces. (line 6)
* PF_INET: Internet Namespace. (line 21)
* PF_INET6: Internet Namespace. (line 25)
* PF_ISO: Misc Namespaces. (line 6)
* PF_LOCAL: Local Namespace Details.
(line 11)
* PF_NS: Misc Namespaces. (line 6)
* PF_ROUTE: Misc Namespaces. (line 6)
* PF_UNIX: Local Namespace Details.
(line 16)
* PI: Mathematical Constants.
(line 62)
* PIPE_BUF: Limits for Files. (line 52)
* PM_STR: The Elegant and Fast Way.
(line 83)
* POSITIVE_SIGN: The Elegant and Fast Way.
(line 181)
* PRIO_MAX: Traditional Scheduling Functions.
(line 21)
* PRIO_MIN: Traditional Scheduling Functions.
(line 18)
* PRIO_PGRP: Traditional Scheduling Functions.
(line 78)
* PRIO_PROCESS: Traditional Scheduling Functions.
(line 75)
* PRIO_USER: Traditional Scheduling Functions.
(line 82)
* program_invocation_name: Error Messages. (line 77)
* program_invocation_short_name: Error Messages. (line 83)
* PROT_EXEC: Memory-mapped I/O. (line 45)
* PROT_READ: Memory-mapped I/O. (line 45)
* PROT_WRITE: Memory-mapped I/O. (line 45)
* protocols: NSS Basics. (line 44)
* PWD: Working Directory. (line 87)
* R_OK: Testing File Access. (line 76)
* RADIXCHAR: The Elegant and Fast Way.
(line 246)
* RAND_MAX: ISO Random. (line 13)
* RE_DUP_MAX: General Limits. (line 69)
* RLIM_INFINITY: Limits on Resources. (line 169)
* RLIM_NLIMITS: Limits on Resources. (line 165)
* RLIMIT_AS: Limits on Resources. (line 159)
* RLIMIT_CORE: Limits on Resources. (line 131)
* RLIMIT_CPU: Limits on Resources. (line 111)
* RLIMIT_DATA: Limits on Resources. (line 121)
* RLIMIT_FSIZE: Limits on Resources. (line 116)
* RLIMIT_NOFILE: Limits on Resources. (line 152)
* RLIMIT_OFILE: Limits on Resources. (line 153)
* RLIMIT_RSS: Limits on Resources. (line 137)
* RLIMIT_STACK: Limits on Resources. (line 126)
* rpc: NSS Basics. (line 50)
* RUN_LVL <1>: XPG Functions. (line 45)
* RUN_LVL: Manipulating the Database.
(line 75)
* S_IEXEC: Permission Bits. (line 31)
* S_IFBLK: Testing File Type. (line 76)
* S_IFCHR: Testing File Type. (line 73)
* S_IFDIR: Testing File Type. (line 70)
* S_IFIFO: Testing File Type. (line 88)
* S_IFLNK: Testing File Type. (line 82)
* S_IFMT: Testing File Type. (line 64)
* S_IFREG: Testing File Type. (line 79)
* S_IFSOCK: Testing File Type. (line 85)
* S_IREAD: Permission Bits. (line 20)
* S_IRGRP: Permission Bits. (line 39)
* S_IROTH: Permission Bits. (line 52)
* S_IRUSR: Permission Bits. (line 19)
* S_IRWXG: Permission Bits. (line 49)
* S_IRWXO: Permission Bits. (line 61)
* S_IRWXU: Permission Bits. (line 36)
* S_ISGID: Permission Bits. (line 68)
* S_ISUID: Permission Bits. (line 64)
* S_ISVTX: Permission Bits. (line 72)
* S_IWGRP: Permission Bits. (line 42)
* S_IWOTH: Permission Bits. (line 55)
* S_IWRITE: Permission Bits. (line 26)
* S_IWUSR: Permission Bits. (line 25)
* S_IXGRP: Permission Bits. (line 45)
* S_IXOTH: Permission Bits. (line 58)
* S_IXUSR: Permission Bits. (line 30)
* SA_NOCLDSTOP: Flags for Sigaction. (line 26)
* SA_ONSTACK: Flags for Sigaction. (line 34)
* SA_RESTART: Flags for Sigaction. (line 41)
* SC_SSIZE_MAX: Constants for Sysconf.
(line 391)
* SCHAR_MAX: Range of Type. (line 27)
* SCHAR_MIN: Range of Type. (line 23)
* SEEK_CUR: File Positioning. (line 124)
* SEEK_END: File Positioning. (line 129)
* SEEK_SET: File Positioning. (line 119)
* services: NSS Basics. (line 53)
* shadow: NSS Basics. (line 56)
* SHRT_MAX: Range of Type. (line 46)
* SHRT_MIN: Range of Type. (line 41)
* SIG_BLOCK: Process Signal Mask. (line 26)
* SIG_DFL: Basic Signal Handling.
(line 35)
* SIG_ERR: Basic Signal Handling.
(line 142)
* SIG_IGN: Basic Signal Handling.
(line 40)
* SIG_SETMASK: Process Signal Mask. (line 35)
* SIG_UNBLOCK: Process Signal Mask. (line 31)
* SIGABRT: Program Error Signals.
(line 135)
* SIGALRM: Alarm Signals. (line 16)
* SIGBUS: Program Error Signals.
(line 122)
* SIGCHLD: Job Control Signals. (line 14)
* SIGCLD: Job Control Signals. (line 25)
* SIGCONT: Job Control Signals. (line 28)
* SIGEMT: Program Error Signals.
(line 149)
* SIGFPE: Program Error Signals.
(line 42)
* SIGHUP: Termination Signals. (line 72)
* SIGILL: Program Error Signals.
(line 93)
* SIGINFO: Miscellaneous Signals.
(line 33)
* SIGINT: Termination Signals. (line 30)
* SIGIO: Asynchronous I/O Signals.
(line 13)
* SIGIOT: Program Error Signals.
(line 139)
* SIGKILL: Termination Signals. (line 53)
* SIGLOST: Operation Error Signals.
(line 27)
* signgam: Special Functions. (line 29)
* SIGPIPE: Operation Error Signals.
(line 13)
* SIGPOLL: Asynchronous I/O Signals.
(line 28)
* SIGPROF: Alarm Signals. (line 26)
* SIGQUIT: Termination Signals. (line 36)
* SIGSEGV: Program Error Signals.
(line 108)
* SIGSTKSZ: Signal Stack. (line 41)
* SIGSTOP: Job Control Signals. (line 42)
* SIGSYS: Program Error Signals.
(line 154)
* SIGTERM: Termination Signals. (line 22)
* SIGTRAP: Program Error Signals.
(line 143)
* SIGTSTP: Job Control Signals. (line 46)
* SIGTTIN: Job Control Signals. (line 59)
* SIGTTOU: Job Control Signals. (line 67)
* SIGURG: Asynchronous I/O Signals.
(line 24)
* SIGUSR1: Miscellaneous Signals.
(line 11)
* SIGUSR2: Miscellaneous Signals.
(line 12)
* SIGVTALRM: Alarm Signals. (line 21)
* SIGWINCH: Miscellaneous Signals.
(line 23)
* SIGXCPU: Operation Error Signals.
(line 37)
* SIGXFSZ: Operation Error Signals.
(line 42)
* SOCK_DGRAM: Communication Styles.
(line 19)
* SOCK_RAW: Communication Styles.
(line 42)
* SOCK_STREAM: Communication Styles.
(line 12)
* SOL_SOCKET: Socket-Level Options.
(line 7)
* SS_DISABLE: Signal Stack. (line 60)
* SS_ONSTACK: Signal Stack. (line 64)
* SSIZE_MAX: General Limits. (line 61)
* stderr: Standard Streams. (line 22)
* STDERR_FILENO: Descriptors and Streams.
(line 62)
* stdin: Standard Streams. (line 14)
* STDIN_FILENO: Descriptors and Streams.
(line 54)
* stdout: Standard Streams. (line 18)
* STDOUT_FILENO: Descriptors and Streams.
(line 58)
* STREAM_MAX: General Limits. (line 41)
* SV_INTERRUPT: BSD Handler. (line 33)
* SV_ONSTACK: BSD Handler. (line 28)
* SV_RESETHAND: BSD Handler. (line 40)
* sys_siglist: Signal Messages. (line 41)
* T_FMT: The Elegant and Fast Way.
(line 101)
* T_FMT_AMPM: The Elegant and Fast Way.
(line 105)
* TCIFLUSH: Line Control. (line 65)
* TCIOFF: Line Control. (line 106)
* TCIOFLUSH: Line Control. (line 71)
* TCION: Line Control. (line 109)
* TCOFLUSH: Line Control. (line 68)
* TCOOFF: Line Control. (line 100)
* TCOON: Line Control. (line 103)
* TCSADRAIN: Mode Functions. (line 34)
* TCSAFLUSH: Mode Functions. (line 39)
* TCSANOW: Mode Functions. (line 31)
* TCSASOFT: Mode Functions. (line 42)
* THOUSANDS_SEP: The Elegant and Fast Way.
(line 253)
* THOUSEP: The Elegant and Fast Way.
(line 254)
* timezone: Time Zone Functions. (line 44)
* TMP_MAX: Temporary Files. (line 82)
* TOSTOP: Local Modes. (line 111)
* TRY_AGAIN: Host Names. (line 98)
* tzname: Time Zone Functions. (line 7)
* TZNAME_MAX: General Limits. (line 45)
* UCHAR_MAX: Range of Type. (line 28)
* UINT_MAX: Range of Type. (line 57)
* ULLONG_MAX: Range of Type. (line 77)
* ULONG_LONG_MAX: Range of Type. (line 83)
* ULONG_MAX: Range of Type. (line 67)
* USER_PROCESS <1>: XPG Functions. (line 66)
* USER_PROCESS: Manipulating the Database.
(line 96)
* USHRT_MAX: Range of Type. (line 47)
* VDISCARD: Other Special. (line 24)
* VDSUSP: Signal Characters. (line 53)
* VEOF: Editing Characters. (line 10)
* VEOL: Editing Characters. (line 22)
* VEOL2: Editing Characters. (line 35)
* VERASE: Editing Characters. (line 47)
* VINTR: Signal Characters. (line 11)
* VKILL: Editing Characters. (line 85)
* VLNEXT: Other Special. (line 7)
* VMIN: Noncanonical Input. (line 26)
* VQUIT: Signal Characters. (line 22)
* VREPRINT: Editing Characters. (line 96)
* VSTART: Start/Stop Characters.
(line 11)
* VSTATUS: Other Special. (line 39)
* VSTOP: Start/Stop Characters.
(line 28)
* VSUSP: Signal Characters. (line 33)
* VTIME: Noncanonical Input. (line 34)
* VWERASE: Editing Characters. (line 61)
* W_OK: Testing File Access. (line 79)
* WCHAR_MAX <1>: Range of Type. (line 89)
* WCHAR_MAX: Extended Char Intro. (line 110)
* WCHAR_MIN: Extended Char Intro. (line 104)
* WEOF <1>: EOF and Errors. (line 25)
* WEOF: Extended Char Intro. (line 118)
* X_OK: Testing File Access. (line 82)
* YESEXPR: The Elegant and Fast Way.
(line 264)
* YESSTR: The Elegant and Fast Way.
(line 275)

File: libc.info, Node: File Index, Prev: Variable Index, Up: Top
Program and File Index
**********************
�[index�]
* Menu:
* -lbsd-compat <1>: Process Group Functions.
(line 55)
* -lbsd-compat: Feature Test Macros. (line 88)
* /etc/group: Group Database. (line 6)
* /etc/hosts: Host Names. (line 13)
* /etc/localtime: TZ Variable. (line 110)
* /etc/networks: Networks Database. (line 6)
* /etc/passwd: User Database. (line 6)
* /etc/protocols: Protocols Database. (line 19)
* /etc/services: Services Database. (line 6)
* /share/lib/zoneinfo: TZ Variable. (line 118)
* argp.h: Argp. (line 25)
* argz.h: Argz Functions. (line 24)
* arpa/inet.h: Host Address Functions.
(line 6)
* assert.h: Consistency Checking.
(line 11)
* bsd-compat <1>: Process Group Functions.
(line 55)
* bsd-compat: Feature Test Macros. (line 88)
* cd: Working Directory. (line 18)
* chgrp: File Owner. (line 27)
* chown: File Owner. (line 27)
* complex.h <1>: Operations on Complex.
(line 6)
* complex.h <2>: Complex Numbers. (line 6)
* complex.h: Mathematics. (line 9)
* ctype.h <1>: Case Conversion. (line 21)
* ctype.h <2>: Classification of Characters.
(line 25)
* ctype.h: Character Handling. (line 9)
* dirent.h <1>: Random Access Directory.
(line 6)
* dirent.h <2>: Reading/Closing Directory.
(line 6)
* dirent.h <3>: Opening a Directory. (line 6)
* dirent.h <4>: Directory Entries. (line 6)
* dirent.h: Reserved Names. (line 80)
* envz.h: Envz Functions. (line 26)
* errno.h <1>: Error Codes. (line 6)
* errno.h <2>: Checking for Errors. (line 12)
* errno.h: Error Reporting. (line 13)
* execinfo.h: Backtraces. (line 13)
* fcntl.h <1>: Interrupt Input. (line 20)
* fcntl.h <2>: File Locks. (line 34)
* fcntl.h <3>: File Status Flags. (line 27)
* fcntl.h <4>: Descriptor Flags. (line 16)
* fcntl.h <5>: Duplicating Descriptors.
(line 20)
* fcntl.h <6>: Control Operations. (line 15)
* fcntl.h <7>: Opening and Closing Files.
(line 8)
* fcntl.h: Reserved Names. (line 83)
* float.h: Floating Point Parameters.
(line 6)
* fnmatch.h: Wildcard Matching. (line 6)
* gcc: ISO C. (line 15)
* gconv.h: glibc iconv Implementation.
(line 203)
* grp.h <1>: Group Data Structure.
(line 7)
* grp.h <2>: Setting Groups. (line 67)
* grp.h: Reserved Names. (line 85)
* hostid: Host Identification. (line 49)
* hostname: Host Identification. (line 49)
* iconv.h: Generic Conversion Interface.
(line 77)
* kill: Termination Signals. (line 27)
* ksh: Wildcard Matching. (line 71)
* langinfo.h: The Elegant and Fast Way.
(line 23)
* limits.h <1>: Width of Type. (line 14)
* limits.h <2>: Limits for Files. (line 14)
* limits.h <3>: General Limits. (line 13)
* limits.h <4>: Selecting the Conversion.
(line 22)
* limits.h: Reserved Names. (line 87)
* locale: Locale Names. (line 8)
* locale.h <1>: The Lame Way to Locale Data.
(line 13)
* locale.h: Setting the Locale. (line 21)
* localtime: TZ Variable. (line 110)
* ls: File Attributes. (line 6)
* malloc.h <1>: Statistics of Malloc.
(line 9)
* malloc.h <2>: Hooks for Malloc. (line 11)
* malloc.h: Malloc Tunable Parameters.
(line 8)
* math.h <1>: Rounding Functions. (line 6)
* math.h <2>: Normalization Functions.
(line 14)
* math.h <3>: Absolute Value. (line 12)
* math.h <4>: Floating Point Classes.
(line 6)
* math.h: Mathematics. (line 9)
* mcheck.h: Heap Consistency Checking.
(line 8)
* mkdir: Creating Directories.
(line 6)
* netdb.h <1>: Networks Database. (line 6)
* netdb.h <2>: Protocols Database. (line 27)
* netdb.h <3>: Services Database. (line 9)
* netdb.h: Host Names. (line 13)
* netinet/in.h <1>: Byte Order. (line 33)
* netinet/in.h <2>: Ports. (line 35)
* netinet/in.h <3>: Host Address Data Type.
(line 23)
* netinet/in.h: Internet Address Formats.
(line 13)
* obstack.h: Creating Obstacks. (line 7)
* printf.h <1>: Conversion Specifier Options.
(line 13)
* printf.h: Registering New Conversions.
(line 7)
* pt_chown: Configuring and compiling.
(line 124)
* pwd.h <1>: User Data Structure. (line 7)
* pwd.h: Reserved Names. (line 89)
* setjmp.h <1>: Non-Local Exits and Signals.
(line 18)
* setjmp.h: Non-Local Details. (line 8)
* sh: Running a Command. (line 12)
* signal.h <1>: BSD Signal Handling. (line 25)
* signal.h <2>: Checking for Pending Signals.
(line 7)
* signal.h <3>: Process Signal Mask. (line 12)
* signal.h <4>: Signal Sets. (line 11)
* signal.h <5>: Signaling Another Process.
(line 24)
* signal.h <6>: Signaling Yourself. (line 7)
* signal.h <7>: Flags for Sigaction. (line 23)
* signal.h <8>: Advanced Signal Handling.
(line 12)
* signal.h <9>: Basic Signal Handling.
(line 8)
* signal.h <10>: Standard Signals. (line 6)
* signal.h: Reserved Names. (line 92)
* stdarg.h <1>: Argument Macros. (line 7)
* stdarg.h: Receiving Arguments. (line 10)
* stddef.h: Important Data Types.
(line 11)
* stdint.h: Integers. (line 23)
* stdio.h <1>: Who Logged In. (line 14)
* stdio.h <2>: Identifying the Terminal.
(line 13)
* stdio.h <3>: Signal Messages. (line 38)
* stdio.h <4>: Temporary Files. (line 17)
* stdio.h <5>: Deleting Files. (line 73)
* stdio.h <6>: Descriptors and Streams.
(line 9)
* stdio.h <7>: Streams and Cookies. (line 25)
* stdio.h <8>: String Streams. (line 7)
* stdio.h <9>: Controlling Buffering.
(line 11)
* stdio.h <10>: Flushing Buffers. (line 23)
* stdio.h <11>: Portable Positioning.
(line 50)
* stdio.h <12>: File Positioning. (line 19)
* stdio.h <13>: Formatted Input Functions.
(line 7)
* stdio.h <14>: Variable Arguments Output.
(line 55)
* stdio.h <15>: Formatted Output Functions.
(line 11)
* stdio.h <16>: Block Input/Output. (line 25)
* stdio.h <17>: Character Input. (line 8)
* stdio.h <18>: Simple Output. (line 10)
* stdio.h <19>: Opening Streams. (line 10)
* stdio.h <20>: Standard Streams. (line 11)
* stdio.h: Streams. (line 14)
* stdlib.h <1>: Running a Command. (line 30)
* stdlib.h <2>: Aborting a Program. (line 7)
* stdlib.h <3>: Exit Status. (line 43)
* stdlib.h <4>: Environment Access. (line 7)
* stdlib.h <5>: Parsing of Floats. (line 6)
* stdlib.h <6>: Parsing of Integers. (line 6)
* stdlib.h <7>: Absolute Value. (line 12)
* stdlib.h <8>: Integer Division. (line 16)
* stdlib.h <9>: SVID Random. (line 31)
* stdlib.h <10>: BSD Random. (line 10)
* stdlib.h <11>: ISO Random. (line 10)
* stdlib.h <12>: Allocation. (line 6)
* stdlib.h <13>: Temporary Files. (line 142)
* stdlib.h <14>: Array Sort Function. (line 7)
* stdlib.h <15>: Array Search Function.
(line 45)
* stdlib.h <16>: Non-reentrant Character Conversion.
(line 95)
* stdlib.h <17>: Selecting the Conversion.
(line 31)
* stdlib.h <18>: Variable Size Automatic.
(line 16)
* stdlib.h <19>: Aligned Memory Blocks.
(line 6)
* stdlib.h <20>: Allocating Cleared Space.
(line 7)
* stdlib.h <21>: Changing Block Size. (line 13)
* stdlib.h <22>: Freeing after Malloc.
(line 8)
* stdlib.h: Basic Allocation. (line 7)
* string.h <1>: Signal Messages. (line 21)
* string.h <2>: Trivial Encryption. (line 15)
* string.h <3>: Finding Tokens in a String.
(line 9)
* string.h <4>: Search Functions. (line 8)
* string.h <5>: Collation Functions. (line 18)
* string.h <6>: String/Array Comparison.
(line 22)
* string.h <7>: Copying and Concatenation.
(line 10)
* string.h: String Length. (line 7)
* sys/param.h: Host Identification. (line 69)
* sys/resource.h <1>: Traditional Scheduling Functions.
(line 6)
* sys/resource.h <2>: Limits on Resources. (line 26)
* sys/resource.h: Resource Usage. (line 6)
* sys/socket.h <1>: Socket-Level Options.
(line 11)
* sys/socket.h <2>: Socket Option Functions.
(line 6)
* sys/socket.h <3>: Sending Datagrams. (line 6)
* sys/socket.h <4>: Socket Data Options. (line 6)
* sys/socket.h <5>: Receiving Data. (line 6)
* sys/socket.h <6>: Sending Data. (line 6)
* sys/socket.h <7>: Socket Pairs. (line 6)
* sys/socket.h <8>: Closing a Socket. (line 13)
* sys/socket.h <9>: Creating a Socket. (line 7)
* sys/socket.h <10>: Internet Namespace. (line 18)
* sys/socket.h <11>: Local Namespace Details.
(line 6)
* sys/socket.h <12>: Reading Address. (line 6)
* sys/socket.h <13>: Setting Address. (line 6)
* sys/socket.h <14>: Address Formats. (line 20)
* sys/socket.h: Communication Styles.
(line 9)
* sys/stat.h <1>: FIFO Special Files. (line 17)
* sys/stat.h <2>: Making Special Files.
(line 10)
* sys/stat.h <3>: Setting Permissions. (line 41)
* sys/stat.h <4>: Permission Bits. (line 13)
* sys/stat.h <5>: Testing File Type. (line 21)
* sys/stat.h <6>: Attribute Meanings. (line 12)
* sys/stat.h <7>: Creating Directories.
(line 47)
* sys/stat.h: Reserved Names. (line 95)
* sys/time.h <1>: Setting an Alarm. (line 51)
* sys/time.h <2>: High-Resolution Calendar.
(line 12)
* sys/time.h: File Times. (line 94)
* sys/times.h <1>: Processor Time. (line 9)
* sys/times.h: Reserved Names. (line 97)
* sys/timex.h: High Accuracy Clock. (line 6)
* sys/types.h <1>: Setting Groups. (line 8)
* sys/types.h <2>: Setting User ID. (line 8)
* sys/types.h <3>: Reading Persona. (line 9)
* sys/types.h <4>: Terminal Access Functions.
(line 8)
* sys/types.h <5>: Process Group Functions.
(line 8)
* sys/types.h <6>: Process Identification.
(line 10)
* sys/types.h: Waiting for I/O. (line 23)
* sys/un.h: Local Namespace Details.
(line 22)
* sys/utsname.h: Platform Type. (line 8)
* sys/vlimit.h: Limits on Resources. (line 212)
* sys/vtimes.h: Resource Usage. (line 102)
* sys/wait.h <1>: BSD Wait Functions. (line 14)
* sys/wait.h <2>: Process Completion Status.
(line 10)
* sys/wait.h: Process Completion. (line 8)
* termios.h <1>: Terminal Modes. (line 6)
* termios.h: Reserved Names. (line 101)
* time.h <1>: TZ Variable. (line 9)
* time.h <2>: Formatting Calendar Time.
(line 7)
* time.h <3>: Simple Calendar Time.
(line 8)
* time.h <4>: CPU Time. (line 7)
* time.h: File Times. (line 14)
* ulimit.h: Limits on Resources. (line 175)
* umask: Setting Permissions. (line 29)
* unistd.h <1>: Options for Files. (line 13)
* unistd.h <2>: System Options. (line 11)
* unistd.h <3>: Host Identification. (line 49)
* unistd.h <4>: Who Logged In. (line 14)
* unistd.h <5>: Setting Groups. (line 8)
* unistd.h <6>: Setting User ID. (line 8)
* unistd.h <7>: Reading Persona. (line 9)
* unistd.h <8>: Terminal Access Functions.
(line 8)
* unistd.h <9>: Process Group Functions.
(line 8)
* unistd.h <10>: Executing a File. (line 13)
* unistd.h <11>: Creating a Process. (line 7)
* unistd.h <12>: Process Identification.
(line 10)
* unistd.h <13>: Termination Internals.
(line 7)
* unistd.h <14>: Using Getopt. (line 7)
* unistd.h <15>: Setting an Alarm. (line 51)
* unistd.h <16>: Is It a Terminal. (line 10)
* unistd.h <17>: Creating a Pipe. (line 14)
* unistd.h <18>: Testing File Access. (line 39)
* unistd.h <19>: File Owner. (line 31)
* unistd.h <20>: Deleting Files. (line 19)
* unistd.h <21>: Symbolic Links. (line 43)
* unistd.h <22>: Hard Links. (line 25)
* unistd.h <23>: Working Directory. (line 21)
* unistd.h <24>: Duplicating Descriptors.
(line 20)
* unistd.h <25>: Descriptors and Streams.
(line 51)
* unistd.h <26>: I/O Primitives. (line 8)
* unistd.h: Opening and Closing Files.
(line 8)
* utime.h: File Times. (line 36)
* utmp.h <1>: Logging In and Out. (line 7)
* utmp.h: Manipulating the Database.
(line 7)
* utmpx.h: XPG Functions. (line 7)
* wchar.h <1>: Parsing of Integers. (line 6)
* wchar.h <2>: Character Input. (line 8)
* wchar.h <3>: Simple Output. (line 10)
* wchar.h <4>: Converting Strings. (line 45)
* wchar.h <5>: Converting a Character.
(line 29)
* wchar.h <6>: Keeping the state. (line 19)
* wchar.h <7>: Extended Char Intro. (line 96)
* wchar.h <8>: Collation Functions. (line 18)
* wchar.h: Copying and Concatenation.
(line 10)
* wctype.h <1>: Wide Character Case Conversion.
(line 17)
* wctype.h: Classification of Wide Characters.
(line 34)
* zoneinfo: TZ Variable. (line 118)