blob: ed376977e5a83a14a7b54b34a0eb06bf4d4c6c7e [file] [log] [blame]
This is /home/vagrant/rpmbuild/BUILD/build-eglibc/manual/libc.info,
produced by makeinfo version 4.13 from libc.texinfo.
INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc). C library.
END-INFO-DIR-ENTRY
INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DES_FAILED: (libc)DES Encryption.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* SV_INTERRUPT: (libc)BSD Handler.
* SV_ONSTACK: (libc)BSD Handler.
* SV_RESETHAND: (libc)BSD Handler.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying and Concatenation.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying and Concatenation.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* calloc: (libc)Allocating Cleared Space.
* canonicalize_file_name: (libc)Symbolic Links.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbc_crypt: (libc)DES Encryption.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfree: (libc)Freeing after Malloc.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)crypt.
* crypt_r: (libc)crypt.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* des_setparity: (libc)DES Encryption.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecb_crypt: (libc)DES Encryption.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* encrypt: (libc)DES Encryption.
* encrypt_r: (libc)DES Encryption.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexceptflag: (libc)Status bit operations.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying and Concatenation.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying and Concatenation.
* memfrob: (libc)Trivial Encryption.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying and Concatenation.
* mempcpy: (libc)Copying and Concatenation.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying and Concatenation.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* popen: (libc)Pipe to a Subprocess.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow10: (libc)Exponents and Logarithms.
* pow10f: (libc)Exponents and Logarithms.
* pow10l: (libc)Exponents and Logarithms.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setkey: (libc)DES Encryption.
* setkey_r: (libc)DES Encryption.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)Blocking in BSD.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Handler.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)Blocking in BSD.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)Blocking in BSD.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)Blocking in BSD.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sigvec: (libc)BSD Handler.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying and Concatenation.
* stpncpy: (libc)Copying and Concatenation.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Copying and Concatenation.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying and Concatenation.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying and Concatenation.
* strdupa: (libc)Copying and Concatenation.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfry: (libc)strfry.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Copying and Concatenation.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Copying and Concatenation.
* strndup: (libc)Copying and Concatenation.
* strndupa: (libc)Copying and Concatenation.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying and Concatenation.
* wcpncpy: (libc)Copying and Concatenation.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Copying and Concatenation.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying and Concatenation.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying and Concatenation.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Copying and Concatenation.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Copying and Concatenation.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying and Concatenation.
* wmemmove: (libc)Copying and Concatenation.
* wmempcpy: (libc)Copying and Concatenation.
* wmemset: (libc)Copying and Concatenation.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY
This file documents the GNU C Library.
This is `The GNU C Library Reference Manual', for version
2.18-2013.10 (EGLIBC).
Copyright (C) 1993-2013 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version
1.3 or any later version published by the Free Software Foundation;
with the Invariant Sections being "Free Software Needs Free
Documentation" and "GNU Lesser General Public License", the Front-Cover
texts being "A GNU Manual", and with the Back-Cover Texts as in (a)
below. A copy of the license is included in the section entitled "GNU
Free Documentation License".
(a) The FSF's Back-Cover Text is: "You have the freedom to copy and
modify this GNU manual. Buying copies from the FSF supports it in
developing GNU and promoting software freedom."

File: libc.info, Node: Standard Environment, Prev: Environment Access, Up: Environment Variables
25.4.2 Standard Environment Variables
-------------------------------------
These environment variables have standard meanings. This doesn't mean
that they are always present in the environment; but if these variables
_are_ present, they have these meanings. You shouldn't try to use
these environment variable names for some other purpose.
`HOME'
This is a string representing the user's "home directory", or
initial default working directory.
The user can set `HOME' to any value. If you need to make sure to
obtain the proper home directory for a particular user, you should
not use `HOME'; instead, look up the user's name in the user
database (*note User Database::).
For most purposes, it is better to use `HOME', precisely because
this lets the user specify the value.
`LOGNAME'
This is the name that the user used to log in. Since the value in
the environment can be tweaked arbitrarily, this is not a reliable
way to identify the user who is running a program; a function like
`getlogin' (*note Who Logged In::) is better for that purpose.
For most purposes, it is better to use `LOGNAME', precisely because
this lets the user specify the value.
`PATH'
A "path" is a sequence of directory names which is used for
searching for a file. The variable `PATH' holds a path used for
searching for programs to be run.
The `execlp' and `execvp' functions (*note Executing a File::) use
this environment variable, as do many shells and other utilities
which are implemented in terms of those functions.
The syntax of a path is a sequence of directory names separated by
colons. An empty string instead of a directory name stands for the
current directory (*note Working Directory::).
A typical value for this environment variable might be a string
like:
:/bin:/etc:/usr/bin:/usr/new/X11:/usr/new:/usr/local/bin
This means that if the user tries to execute a program named `foo',
the system will look for files named `foo', `/bin/foo',
`/etc/foo', and so on. The first of these files that exists is
the one that is executed.
`TERM'
This specifies the kind of terminal that is receiving program
output. Some programs can make use of this information to take
advantage of special escape sequences or terminal modes supported
by particular kinds of terminals. Many programs which use the
termcap library (*note Find: (termcap)Finding a Terminal
Description.) use the `TERM' environment variable, for example.
`TZ'
This specifies the time zone. *Note TZ Variable::, for
information about the format of this string and how it is used.
`LANG'
This specifies the default locale to use for attribute categories
where neither `LC_ALL' nor the specific environment variable for
that category is set. *Note Locales::, for more information about
locales.
`LC_ALL'
If this environment variable is set it overrides the selection for
all the locales done using the other `LC_*' environment variables.
The value of the other `LC_*' environment variables is simply
ignored in this case.
`LC_COLLATE'
This specifies what locale to use for string sorting.
`LC_CTYPE'
This specifies what locale to use for character sets and character
classification.
`LC_MESSAGES'
This specifies what locale to use for printing messages and to
parse responses.
`LC_MONETARY'
This specifies what locale to use for formatting monetary values.
`LC_NUMERIC'
This specifies what locale to use for formatting numbers.
`LC_TIME'
This specifies what locale to use for formatting date/time values.
`NLSPATH'
This specifies the directories in which the `catopen' function
looks for message translation catalogs.
`_POSIX_OPTION_ORDER'
If this environment variable is defined, it suppresses the usual
reordering of command line arguments by `getopt' and `argp_parse'.
*Note Argument Syntax::.

File: libc.info, Node: Auxiliary Vector, Next: System Calls, Prev: Environment Variables, Up: Program Basics
25.5 Auxiliary Vector
=====================
When a program is executed, it receives information from the operating
system about the environment in which it is operating. The form of this
information is a table of key-value pairs, where the keys are from the
set of `AT_' values in `elf.h'. Some of the data is provided by the
kernel for libc consumption, and may be obtained by ordinary
interfaces, such as `sysconf'. However, on a platform-by-platform
basis there may be information that is not available any other way.
25.5.1 Definition of `getauxval'
--------------------------------
-- Function: unsigned long int getauxval (unsigned long int TYPE)
This function is used to inquire about the entries in the auxiliary
vector. The TYPE argument should be one of the `AT_' symbols
defined in `elf.h'. If a matching entry is found, the value is
returned; if the entry is not found, zero is returned.
For some platforms, the key `AT_HWCAP' is the easiest way to inquire
about any instruction set extensions available at runtime. In this
case, there will (of necessity) be a platform-specific set of `HWCAP_'
values masked together that describe the capabilities of the cpu on
which the program is being executed.

File: libc.info, Node: System Calls, Next: Program Termination, Prev: Auxiliary Vector, Up: Program Basics
25.6 System Calls
=================
A system call is a request for service that a program makes of the
kernel. The service is generally something that only the kernel has
the privilege to do, such as doing I/O. Programmers don't normally
need to be concerned with system calls because there are functions in
the GNU C Library to do virtually everything that system calls do.
These functions work by making system calls themselves. For example,
there is a system call that changes the permissions of a file, but you
don't need to know about it because you can just use the GNU C Library's
`chmod' function.
System calls are sometimes called kernel calls.
However, there are times when you want to make a system call
explicitly, and for that, the GNU C Library provides the `syscall'
function. `syscall' is harder to use and less portable than functions
like `chmod', but easier and more portable than coding the system call
in assembler instructions.
`syscall' is most useful when you are working with a system call
which is special to your system or is newer than the GNU C Library you
are using. `syscall' is implemented in an entirely generic way; the
function does not know anything about what a particular system call
does or even if it is valid.
The description of `syscall' in this section assumes a certain
protocol for system calls on the various platforms on which the GNU C
Library runs. That protocol is not defined by any strong authority, but
we won't describe it here either because anyone who is coding `syscall'
probably won't accept anything less than kernel and C library source
code as a specification of the interface between them anyway.
`syscall' is declared in `unistd.h'.
-- Function: long int syscall (long int SYSNO, ...)
`syscall' performs a generic system call.
SYSNO is the system call number. Each kind of system call is
identified by a number. Macros for all the possible system call
numbers are defined in `sys/syscall.h'
The remaining arguments are the arguments for the system call, in
order, and their meanings depend on the kind of system call. Each
kind of system call has a definite number of arguments, from zero
to five. If you code more arguments than the system call takes,
the extra ones to the right are ignored.
The return value is the return value from the system call, unless
the system call failed. In that case, `syscall' returns `-1' and
sets `errno' to an error code that the system call returned. Note
that system calls do not return `-1' when they succeed.
If you specify an invalid SYSNO, `syscall' returns `-1' with
`errno' = `ENOSYS'.
Example:
#include <unistd.h>
#include <sys/syscall.h>
#include <errno.h>
...
int rc;
rc = syscall(SYS_chmod, "/etc/passwd", 0444);
if (rc == -1)
fprintf(stderr, "chmod failed, errno = %d\n", errno);
This, if all the compatibility stars are aligned, is equivalent to
the following preferable code:
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
...
int rc;
rc = chmod("/etc/passwd", 0444);
if (rc == -1)
fprintf(stderr, "chmod failed, errno = %d\n", errno);

File: libc.info, Node: Program Termination, Prev: System Calls, Up: Program Basics
25.7 Program Termination
========================
The usual way for a program to terminate is simply for its `main'
function to return. The "exit status value" returned from the `main'
function is used to report information back to the process's parent
process or shell.
A program can also terminate normally by calling the `exit' function.
In addition, programs can be terminated by signals; this is
discussed in more detail in *note Signal Handling::. The `abort'
function causes a signal that kills the program.
* Menu:
* Normal Termination:: If a program calls `exit', a
process terminates normally.
* Exit Status:: The `exit status' provides information
about why the process terminated.
* Cleanups on Exit:: A process can run its own cleanup
functions upon normal termination.
* Aborting a Program:: The `abort' function causes
abnormal program termination.
* Termination Internals:: What happens when a process terminates.

File: libc.info, Node: Normal Termination, Next: Exit Status, Up: Program Termination
25.7.1 Normal Termination
-------------------------
A process terminates normally when its program signals it is done by
calling `exit'. Returning from `main' is equivalent to calling `exit',
and the value that `main' returns is used as the argument to `exit'.
-- Function: void exit (int STATUS)
The `exit' function tells the system that the program is done,
which causes it to terminate the process.
STATUS is the program's exit status, which becomes part of the
process' termination status. This function does not return.
Normal termination causes the following actions:
1. Functions that were registered with the `atexit' or `on_exit'
functions are called in the reverse order of their registration.
This mechanism allows your application to specify its own
"cleanup" actions to be performed at program termination.
Typically, this is used to do things like saving program state
information in a file, or unlocking locks in shared data bases.
2. All open streams are closed, writing out any buffered output data.
See *note Closing Streams::. In addition, temporary files opened
with the `tmpfile' function are removed; see *note Temporary
Files::.
3. `_exit' is called, terminating the program. *Note Termination
Internals::.

File: libc.info, Node: Exit Status, Next: Cleanups on Exit, Prev: Normal Termination, Up: Program Termination
25.7.2 Exit Status
------------------
When a program exits, it can return to the parent process a small
amount of information about the cause of termination, using the "exit
status". This is a value between 0 and 255 that the exiting process
passes as an argument to `exit'.
Normally you should use the exit status to report very broad
information about success or failure. You can't provide a lot of
detail about the reasons for the failure, and most parent processes
would not want much detail anyway.
There are conventions for what sorts of status values certain
programs should return. The most common convention is simply 0 for
success and 1 for failure. Programs that perform comparison use a
different convention: they use status 1 to indicate a mismatch, and
status 2 to indicate an inability to compare. Your program should
follow an existing convention if an existing convention makes sense for
it.
A general convention reserves status values 128 and up for special
purposes. In particular, the value 128 is used to indicate failure to
execute another program in a subprocess. This convention is not
universally obeyed, but it is a good idea to follow it in your programs.
*Warning:* Don't try to use the number of errors as the exit status.
This is actually not very useful; a parent process would generally not
care how many errors occurred. Worse than that, it does not work,
because the status value is truncated to eight bits. Thus, if the
program tried to report 256 errors, the parent would receive a report
of 0 errors--that is, success.
For the same reason, it does not work to use the value of `errno' as
the exit status--these can exceed 255.
*Portability note:* Some non-POSIX systems use different conventions
for exit status values. For greater portability, you can use the
macros `EXIT_SUCCESS' and `EXIT_FAILURE' for the conventional status
value for success and failure, respectively. They are declared in the
file `stdlib.h'.
-- Macro: int EXIT_SUCCESS
This macro can be used with the `exit' function to indicate
successful program completion.
On POSIX systems, the value of this macro is `0'. On other
systems, the value might be some other (possibly non-constant)
integer expression.
-- Macro: int EXIT_FAILURE
This macro can be used with the `exit' function to indicate
unsuccessful program completion in a general sense.
On POSIX systems, the value of this macro is `1'. On other
systems, the value might be some other (possibly non-constant)
integer expression. Other nonzero status values also indicate
failures. Certain programs use different nonzero status values to
indicate particular kinds of "non-success". For example, `diff'
uses status value `1' to mean that the files are different, and
`2' or more to mean that there was difficulty in opening the files.
Don't confuse a program's exit status with a process' termination
status. There are lots of ways a process can terminate besides having
its program finish. In the event that the process termination _is_
caused by program termination (i.e., `exit'), though, the program's
exit status becomes part of the process' termination status.

File: libc.info, Node: Cleanups on Exit, Next: Aborting a Program, Prev: Exit Status, Up: Program Termination
25.7.3 Cleanups on Exit
-----------------------
Your program can arrange to run its own cleanup functions if normal
termination happens. If you are writing a library for use in various
application programs, then it is unreliable to insist that all
applications call the library's cleanup functions explicitly before
exiting. It is much more robust to make the cleanup invisible to the
application, by setting up a cleanup function in the library itself
using `atexit' or `on_exit'.
-- Function: int atexit (void (*FUNCTION) (void))
The `atexit' function registers the function FUNCTION to be called
at normal program termination. The FUNCTION is called with no
arguments.
The return value from `atexit' is zero on success and nonzero if
the function cannot be registered.
-- Function: int on_exit (void (*FUNCTION)(int STATUS, void *ARG),
void *ARG)
This function is a somewhat more powerful variant of `atexit'. It
accepts two arguments, a function FUNCTION and an arbitrary
pointer ARG. At normal program termination, the FUNCTION is
called with two arguments: the STATUS value passed to `exit', and
the ARG.
This function is included in the GNU C Library only for
compatibility for SunOS, and may not be supported by other
implementations.
Here's a trivial program that illustrates the use of `exit' and
`atexit':
#include <stdio.h>
#include <stdlib.h>
void
bye (void)
{
puts ("Goodbye, cruel world....");
}
int
main (void)
{
atexit (bye);
exit (EXIT_SUCCESS);
}
When this program is executed, it just prints the message and exits.

File: libc.info, Node: Aborting a Program, Next: Termination Internals, Prev: Cleanups on Exit, Up: Program Termination
25.7.4 Aborting a Program
-------------------------
You can abort your program using the `abort' function. The prototype
for this function is in `stdlib.h'.
-- Function: void abort (void)
The `abort' function causes abnormal program termination. This
does not execute cleanup functions registered with `atexit' or
`on_exit'.
This function actually terminates the process by raising a
`SIGABRT' signal, and your program can include a handler to
intercept this signal; see *note Signal Handling::.
*Future Change Warning:* Proposed Federal censorship regulations may
prohibit us from giving you information about the possibility of
calling this function. We would be required to say that this is not an
acceptable way of terminating a program.

File: libc.info, Node: Termination Internals, Prev: Aborting a Program, Up: Program Termination
25.7.5 Termination Internals
----------------------------
The `_exit' function is the primitive used for process termination by
`exit'. It is declared in the header file `unistd.h'.
-- Function: void _exit (int STATUS)
The `_exit' function is the primitive for causing a process to
terminate with status STATUS. Calling this function does not
execute cleanup functions registered with `atexit' or `on_exit'.
-- Function: void _Exit (int STATUS)
The `_Exit' function is the ISO C equivalent to `_exit'. The
ISO C committee members were not sure whether the definitions of
`_exit' and `_Exit' were compatible so they have not used the
POSIX name.
This function was introduced in ISO C99 and is declared in
`stdlib.h'.
When a process terminates for any reason--either because the program
terminates, or as a result of a signal--the following things happen:
* All open file descriptors in the process are closed. *Note
Low-Level I/O::. Note that streams are not flushed automatically
when the process terminates; see *note I/O on Streams::.
* A process exit status is saved to be reported back to the parent
process via `wait' or `waitpid'; see *note Process Completion::.
If the program exited, this status includes as its low-order 8
bits the program exit status.
* Any child processes of the process being terminated are assigned a
new parent process. (On most systems, including GNU, this is the
`init' process, with process ID 1.)
* A `SIGCHLD' signal is sent to the parent process.
* If the process is a session leader that has a controlling
terminal, then a `SIGHUP' signal is sent to each process in the
foreground job, and the controlling terminal is disassociated from
that session. *Note Job Control::.
* If termination of a process causes a process group to become
orphaned, and any member of that process group is stopped, then a
`SIGHUP' signal and a `SIGCONT' signal are sent to each process in
the group. *Note Job Control::.

File: libc.info, Node: Processes, Next: Job Control, Prev: Program Basics, Up: Top
26 Processes
************
"Processes" are the primitive units for allocation of system resources.
Each process has its own address space and (usually) one thread of
control. A process executes a program; you can have multiple processes
executing the same program, but each process has its own copy of the
program within its own address space and executes it independently of
the other copies.
Processes are organized hierarchically. Each process has a "parent
process" which explicitly arranged to create it. The processes created
by a given parent are called its "child processes". A child inherits
many of its attributes from the parent process.
This chapter describes how a program can create, terminate, and
control child processes. Actually, there are three distinct operations
involved: creating a new child process, causing the new process to
execute a program, and coordinating the completion of the child process
with the original program.
The `system' function provides a simple, portable mechanism for
running another program; it does all three steps automatically. If you
need more control over the details of how this is done, you can use the
primitive functions to do each step individually instead.
* Menu:
* Running a Command:: The easy way to run another program.
* Process Creation Concepts:: An overview of the hard way to do it.
* Process Identification:: How to get the process ID of a process.
* Creating a Process:: How to fork a child process.
* Executing a File:: How to make a process execute another program.
* Process Completion:: How to tell when a child process has completed.
* Process Completion Status:: How to interpret the status value
returned from a child process.
* BSD Wait Functions:: More functions, for backward compatibility.
* Process Creation Example:: A complete example program.

File: libc.info, Node: Running a Command, Next: Process Creation Concepts, Up: Processes
26.1 Running a Command
======================
The easy way to run another program is to use the `system' function.
This function does all the work of running a subprogram, but it doesn't
give you much control over the details: you have to wait until the
subprogram terminates before you can do anything else.
-- Function: int system (const char *COMMAND)
This function executes COMMAND as a shell command. In the GNU C
Library, it always uses the default shell `sh' to run the command.
In particular, it searches the directories in `PATH' to find
programs to execute. The return value is `-1' if it wasn't
possible to create the shell process, and otherwise is the status
of the shell process. *Note Process Completion::, for details on
how this status code can be interpreted.
If the COMMAND argument is a null pointer, a return value of zero
indicates that no command processor is available.
This function is a cancellation point in multi-threaded programs.
This is a problem if the thread allocates some resources (like
memory, file descriptors, semaphores or whatever) at the time
`system' is called. If the thread gets canceled these resources
stay allocated until the program ends. To avoid this calls to
`system' should be protected using cancellation handlers.
The `system' function is declared in the header file `stdlib.h'.
*Portability Note:* Some C implementations may not have any notion
of a command processor that can execute other programs. You can
determine whether a command processor exists by executing
`system (NULL)'; if the return value is nonzero, a command processor is
available.
The `popen' and `pclose' functions (*note Pipe to a Subprocess::)
are closely related to the `system' function. They allow the parent
process to communicate with the standard input and output channels of
the command being executed.

File: libc.info, Node: Process Creation Concepts, Next: Process Identification, Prev: Running a Command, Up: Processes
26.2 Process Creation Concepts
==============================
This section gives an overview of processes and of the steps involved in
creating a process and making it run another program.
Each process is named by a "process ID" number. A unique process ID
is allocated to each process when it is created. The "lifetime" of a
process ends when its termination is reported to its parent process; at
that time, all of the process resources, including its process ID, are
freed.
Processes are created with the `fork' system call (so the operation
of creating a new process is sometimes called "forking" a process).
The "child process" created by `fork' is a copy of the original "parent
process", except that it has its own process ID.
After forking a child process, both the parent and child processes
continue to execute normally. If you want your program to wait for a
child process to finish executing before continuing, you must do this
explicitly after the fork operation, by calling `wait' or `waitpid'
(*note Process Completion::). These functions give you limited
information about why the child terminated--for example, its exit
status code.
A newly forked child process continues to execute the same program as
its parent process, at the point where the `fork' call returns. You
can use the return value from `fork' to tell whether the program is
running in the parent process or the child.
Having several processes run the same program is only occasionally
useful. But the child can execute another program using one of the
`exec' functions; see *note Executing a File::. The program that the
process is executing is called its "process image". Starting execution
of a new program causes the process to forget all about its previous
process image; when the new program exits, the process exits too,
instead of returning to the previous process image.

File: libc.info, Node: Process Identification, Next: Creating a Process, Prev: Process Creation Concepts, Up: Processes
26.3 Process Identification
===========================
The `pid_t' data type represents process IDs. You can get the process
ID of a process by calling `getpid'. The function `getppid' returns
the process ID of the parent of the current process (this is also known
as the "parent process ID"). Your program should include the header
files `unistd.h' and `sys/types.h' to use these functions.
-- Data Type: pid_t
The `pid_t' data type is a signed integer type which is capable of
representing a process ID. In the GNU C Library, this is an `int'.
-- Function: pid_t getpid (void)
The `getpid' function returns the process ID of the current
process.
-- Function: pid_t getppid (void)
The `getppid' function returns the process ID of the parent of the
current process.

File: libc.info, Node: Creating a Process, Next: Executing a File, Prev: Process Identification, Up: Processes
26.4 Creating a Process
=======================
The `fork' function is the primitive for creating a process. It is
declared in the header file `unistd.h'.
-- Function: pid_t fork (void)
The `fork' function creates a new process.
If the operation is successful, there are then both parent and
child processes and both see `fork' return, but with different
values: it returns a value of `0' in the child process and returns
the child's process ID in the parent process.
If process creation failed, `fork' returns a value of `-1' in the
parent process. The following `errno' error conditions are
defined for `fork':
`EAGAIN'
There aren't enough system resources to create another
process, or the user already has too many processes running.
This means exceeding the `RLIMIT_NPROC' resource limit, which
can usually be increased; *note Limits on Resources::.
`ENOMEM'
The process requires more space than the system can supply.
The specific attributes of the child process that differ from the
parent process are:
* The child process has its own unique process ID.
* The parent process ID of the child process is the process ID of its
parent process.
* The child process gets its own copies of the parent process's open
file descriptors. Subsequently changing attributes of the file
descriptors in the parent process won't affect the file
descriptors in the child, and vice versa. *Note Control
Operations::. However, the file position associated with each
descriptor is shared by both processes; *note File Position::.
* The elapsed processor times for the child process are set to zero;
see *note Processor Time::.
* The child doesn't inherit file locks set by the parent process.
*Note Control Operations::.
* The child doesn't inherit alarms set by the parent process. *Note
Setting an Alarm::.
* The set of pending signals (*note Delivery of Signal::) for the
child process is cleared. (The child process inherits its mask of
blocked signals and signal actions from the parent process.)
-- Function: pid_t vfork (void)
The `vfork' function is similar to `fork' but on some systems it
is more efficient; however, there are restrictions you must follow
to use it safely.
While `fork' makes a complete copy of the calling process's address
space and allows both the parent and child to execute
independently, `vfork' does not make this copy. Instead, the
child process created with `vfork' shares its parent's address
space until it calls `_exit' or one of the `exec' functions. In
the meantime, the parent process suspends execution.
You must be very careful not to allow the child process created
with `vfork' to modify any global data or even local variables
shared with the parent. Furthermore, the child process cannot
return from (or do a long jump out of) the function that called
`vfork'! This would leave the parent process's control
information very confused. If in doubt, use `fork' instead.
Some operating systems don't really implement `vfork'. The GNU C
Library permits you to use `vfork' on all systems, but actually
executes `fork' if `vfork' isn't available. If you follow the
proper precautions for using `vfork', your program will still work
even if the system uses `fork' instead.

File: libc.info, Node: Executing a File, Next: Process Completion, Prev: Creating a Process, Up: Processes
26.5 Executing a File
=====================
This section describes the `exec' family of functions, for executing a
file as a process image. You can use these functions to make a child
process execute a new program after it has been forked.
To see the effects of `exec' from the point of view of the called
program, see *note Program Basics::.
The functions in this family differ in how you specify the arguments,
but otherwise they all do the same thing. They are declared in the
header file `unistd.h'.
-- Function: int execv (const char *FILENAME, char *const ARGV[])
The `execv' function executes the file named by FILENAME as a new
process image.
The ARGV argument is an array of null-terminated strings that is
used to provide a value for the `argv' argument to the `main'
function of the program to be executed. The last element of this
array must be a null pointer. By convention, the first element of
this array is the file name of the program sans directory names.
*Note Program Arguments::, for full details on how programs can
access these arguments.
The environment for the new process image is taken from the
`environ' variable of the current process image; see *note
Environment Variables::, for information about environments.
-- Function: int execl (const char *FILENAME, const char *ARG0, ...)
This is similar to `execv', but the ARGV strings are specified
individually instead of as an array. A null pointer must be
passed as the last such argument.
-- Function: int execve (const char *FILENAME, char *const ARGV[],
char *const ENV[])
This is similar to `execv', but permits you to specify the
environment for the new program explicitly as the ENV argument.
This should be an array of strings in the same format as for the
`environ' variable; see *note Environment Access::.
-- Function: int execle (const char *FILENAME, const char *ARG0, ...,
char *const ENV[])
This is similar to `execl', but permits you to specify the
environment for the new program explicitly. The environment
argument is passed following the null pointer that marks the last
ARGV argument, and should be an array of strings in the same
format as for the `environ' variable.
-- Function: int execvp (const char *FILENAME, char *const ARGV[])
The `execvp' function is similar to `execv', except that it
searches the directories listed in the `PATH' environment variable
(*note Standard Environment::) to find the full file name of a
file from FILENAME if FILENAME does not contain a slash.
This function is useful for executing system utility programs,
because it looks for them in the places that the user has chosen.
Shells use it to run the commands that users type.
-- Function: int execlp (const char *FILENAME, const char *ARG0, ...)
This function is like `execl', except that it performs the same
file name searching as the `execvp' function.
The size of the argument list and environment list taken together
must not be greater than `ARG_MAX' bytes. *Note General Limits::. On
GNU/Hurd systems, the size (which compares against `ARG_MAX') includes,
for each string, the number of characters in the string, plus the size
of a `char *', plus one, rounded up to a multiple of the size of a
`char *'. Other systems may have somewhat different rules for counting.
These functions normally don't return, since execution of a new
program causes the currently executing program to go away completely.
A value of `-1' is returned in the event of a failure. In addition to
the usual file name errors (*note File Name Errors::), the following
`errno' error conditions are defined for these functions:
`E2BIG'
The combined size of the new program's argument list and
environment list is larger than `ARG_MAX' bytes. GNU/Hurd systems
have no specific limit on the argument list size, so this error
code cannot result, but you may get `ENOMEM' instead if the
arguments are too big for available memory.
`ENOEXEC'
The specified file can't be executed because it isn't in the right
format.
`ENOMEM'
Executing the specified file requires more storage than is
available.
If execution of the new file succeeds, it updates the access time
field of the file as if the file had been read. *Note File Times::,
for more details about access times of files.
The point at which the file is closed again is not specified, but is
at some point before the process exits or before another process image
is executed.
Executing a new process image completely changes the contents of
memory, copying only the argument and environment strings to new
locations. But many other attributes of the process are unchanged:
* The process ID and the parent process ID. *Note Process Creation
Concepts::.
* Session and process group membership. *Note Concepts of Job
Control::.
* Real user ID and group ID, and supplementary group IDs. *Note
Process Persona::.
* Pending alarms. *Note Setting an Alarm::.
* Current working directory and root directory. *Note Working
Directory::. On GNU/Hurd systems, the root directory is not
copied when executing a setuid program; instead the system default
root directory is used for the new program.
* File mode creation mask. *Note Setting Permissions::.
* Process signal mask; see *note Process Signal Mask::.
* Pending signals; see *note Blocking Signals::.
* Elapsed processor time associated with the process; see *note
Processor Time::.
If the set-user-ID and set-group-ID mode bits of the process image
file are set, this affects the effective user ID and effective group ID
(respectively) of the process. These concepts are discussed in detail
in *note Process Persona::.
Signals that are set to be ignored in the existing process image are
also set to be ignored in the new process image. All other signals are
set to the default action in the new process image. For more
information about signals, see *note Signal Handling::.
File descriptors open in the existing process image remain open in
the new process image, unless they have the `FD_CLOEXEC'
(close-on-exec) flag set. The files that remain open inherit all
attributes of the open file description from the existing process image,
including file locks. File descriptors are discussed in *note
Low-Level I/O::.
Streams, by contrast, cannot survive through `exec' functions,
because they are located in the memory of the process itself. The new
process image has no streams except those it creates afresh. Each of
the streams in the pre-`exec' process image has a descriptor inside it,
and these descriptors do survive through `exec' (provided that they do
not have `FD_CLOEXEC' set). The new process image can reconnect these
to new streams using `fdopen' (*note Descriptors and Streams::).

File: libc.info, Node: Process Completion, Next: Process Completion Status, Prev: Executing a File, Up: Processes
26.6 Process Completion
=======================
The functions described in this section are used to wait for a child
process to terminate or stop, and determine its status. These functions
are declared in the header file `sys/wait.h'.
-- Function: pid_t waitpid (pid_t PID, int *STATUS-PTR, int OPTIONS)
The `waitpid' function is used to request status information from a
child process whose process ID is PID. Normally, the calling
process is suspended until the child process makes status
information available by terminating.
Other values for the PID argument have special interpretations. A
value of `-1' or `WAIT_ANY' requests status information for any
child process; a value of `0' or `WAIT_MYPGRP' requests
information for any child process in the same process group as the
calling process; and any other negative value - PGID requests
information for any child process whose process group ID is PGID.
If status information for a child process is available
immediately, this function returns immediately without waiting.
If more than one eligible child process has status information
available, one of them is chosen randomly, and its status is
returned immediately. To get the status from the other eligible
child processes, you need to call `waitpid' again.
The OPTIONS argument is a bit mask. Its value should be the
bitwise OR (that is, the `|' operator) of zero or more of the
`WNOHANG' and `WUNTRACED' flags. You can use the `WNOHANG' flag
to indicate that the parent process shouldn't wait; and the
`WUNTRACED' flag to request status information from stopped
processes as well as processes that have terminated.
The status information from the child process is stored in the
object that STATUS-PTR points to, unless STATUS-PTR is a null
pointer.
This function is a cancellation point in multi-threaded programs.
This is a problem if the thread allocates some resources (like
memory, file descriptors, semaphores or whatever) at the time
`waitpid' is called. If the thread gets canceled these resources
stay allocated until the program ends. To avoid this calls to
`waitpid' should be protected using cancellation handlers.
The return value is normally the process ID of the child process
whose status is reported. If there are child processes but none
of them is waiting to be noticed, `waitpid' will block until one
is. However, if the `WNOHANG' option was specified, `waitpid'
will return zero instead of blocking.
If a specific PID to wait for was given to `waitpid', it will
ignore all other children (if any). Therefore if there are
children waiting to be noticed but the child whose PID was
specified is not one of them, `waitpid' will block or return zero
as described above.
A value of `-1' is returned in case of error. The following
`errno' error conditions are defined for this function:
`EINTR'
The function was interrupted by delivery of a signal to the
calling process. *Note Interrupted Primitives::.
`ECHILD'
There are no child processes to wait for, or the specified PID
is not a child of the calling process.
`EINVAL'
An invalid value was provided for the OPTIONS argument.
These symbolic constants are defined as values for the PID argument
to the `waitpid' function.
`WAIT_ANY'
This constant macro (whose value is `-1') specifies that `waitpid'
should return status information about any child process.
`WAIT_MYPGRP'
This constant (with value `0') specifies that `waitpid' should
return status information about any child process in the same
process group as the calling process.
These symbolic constants are defined as flags for the OPTIONS
argument to the `waitpid' function. You can bitwise-OR the flags
together to obtain a value to use as the argument.
`WNOHANG'
This flag specifies that `waitpid' should return immediately
instead of waiting, if there is no child process ready to be
noticed.
`WUNTRACED'
This flag specifies that `waitpid' should report the status of any
child processes that have been stopped as well as those that have
terminated.
-- Function: pid_t wait (int *STATUS-PTR)
This is a simplified version of `waitpid', and is used to wait
until any one child process terminates. The call:
wait (&status)
is exactly equivalent to:
waitpid (-1, &status, 0)
This function is a cancellation point in multi-threaded programs.
This is a problem if the thread allocates some resources (like
memory, file descriptors, semaphores or whatever) at the time
`wait' is called. If the thread gets canceled these resources
stay allocated until the program ends. To avoid this calls to
`wait' should be protected using cancellation handlers.
-- Function: pid_t wait4 (pid_t PID, int *STATUS-PTR, int OPTIONS,
struct rusage *USAGE)
If USAGE is a null pointer, `wait4' is equivalent to `waitpid
(PID, STATUS-PTR, OPTIONS)'.
If USAGE is not null, `wait4' stores usage figures for the child
process in `*RUSAGE' (but only if the child has terminated, not if
it has stopped). *Note Resource Usage::.
This function is a BSD extension.
Here's an example of how to use `waitpid' to get the status from all
child processes that have terminated, without ever waiting. This
function is designed to be a handler for `SIGCHLD', the signal that
indicates that at least one child process has terminated.
void
sigchld_handler (int signum)
{
int pid, status, serrno;
serrno = errno;
while (1)
{
pid = waitpid (WAIT_ANY, &status, WNOHANG);
if (pid < 0)
{
perror ("waitpid");
break;
}
if (pid == 0)
break;
notice_termination (pid, status);
}
errno = serrno;
}

File: libc.info, Node: Process Completion Status, Next: BSD Wait Functions, Prev: Process Completion, Up: Processes
26.7 Process Completion Status
==============================
If the exit status value (*note Program Termination::) of the child
process is zero, then the status value reported by `waitpid' or `wait'
is also zero. You can test for other kinds of information encoded in
the returned status value using the following macros. These macros are
defined in the header file `sys/wait.h'.
-- Macro: int WIFEXITED (int STATUS)
This macro returns a nonzero value if the child process terminated
normally with `exit' or `_exit'.
-- Macro: int WEXITSTATUS (int STATUS)
If `WIFEXITED' is true of STATUS, this macro returns the low-order
8 bits of the exit status value from the child process. *Note
Exit Status::.
-- Macro: int WIFSIGNALED (int STATUS)
This macro returns a nonzero value if the child process terminated
because it received a signal that was not handled. *Note Signal
Handling::.
-- Macro: int WTERMSIG (int STATUS)
If `WIFSIGNALED' is true of STATUS, this macro returns the signal
number of the signal that terminated the child process.
-- Macro: int WCOREDUMP (int STATUS)
This macro returns a nonzero value if the child process terminated
and produced a core dump.
-- Macro: int WIFSTOPPED (int STATUS)
This macro returns a nonzero value if the child process is stopped.
-- Macro: int WSTOPSIG (int STATUS)
If `WIFSTOPPED' is true of STATUS, this macro returns the signal
number of the signal that caused the child process to stop.

File: libc.info, Node: BSD Wait Functions, Next: Process Creation Example, Prev: Process Completion Status, Up: Processes
26.8 BSD Process Wait Functions
===============================
The GNU C Library also provides these related facilities for
compatibility with BSD Unix. BSD uses the `union wait' data type to
represent status values rather than an `int'. The two representations
are actually interchangeable; they describe the same bit patterns. The
GNU C Library defines macros such as `WEXITSTATUS' so that they will
work on either kind of object, and the `wait' function is defined to
accept either type of pointer as its STATUS-PTR argument.
These functions are declared in `sys/wait.h'.
-- Data Type: union wait
This data type represents program termination status values. It
has the following members:
`int w_termsig'
The value of this member is the same as that of the
`WTERMSIG' macro.
`int w_coredump'
The value of this member is the same as that of the
`WCOREDUMP' macro.
`int w_retcode'
The value of this member is the same as that of the
`WEXITSTATUS' macro.
`int w_stopsig'
The value of this member is the same as that of the
`WSTOPSIG' macro.
Instead of accessing these members directly, you should use the
equivalent macros.
The `wait3' function is the predecessor to `wait4', which is more
flexible. `wait3' is now obsolete.
-- Function: pid_t wait3 (union wait *STATUS-PTR, int OPTIONS, struct
rusage *USAGE)
If USAGE is a null pointer, `wait3' is equivalent to `waitpid (-1,
STATUS-PTR, OPTIONS)'.
If USAGE is not null, `wait3' stores usage figures for the child
process in `*RUSAGE' (but only if the child has terminated, not if
it has stopped). *Note Resource Usage::.

File: libc.info, Node: Process Creation Example, Prev: BSD Wait Functions, Up: Processes
26.9 Process Creation Example
=============================
Here is an example program showing how you might write a function
similar to the built-in `system'. It executes its COMMAND argument
using the equivalent of `sh -c COMMAND'.
#include <stddef.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
/* Execute the command using this shell program. */
#define SHELL "/bin/sh"
int
my_system (const char *command)
{
int status;
pid_t pid;
pid = fork ();
if (pid == 0)
{
/* This is the child process. Execute the shell command. */
execl (SHELL, SHELL, "-c", command, NULL);
_exit (EXIT_FAILURE);
}
else if (pid < 0)
/* The fork failed. Report failure. */
status = -1;
else
/* This is the parent process. Wait for the child to complete. */
if (waitpid (pid, &status, 0) != pid)
status = -1;
return status;
}
There are a couple of things you should pay attention to in this
example.
Remember that the first `argv' argument supplied to the program
represents the name of the program being executed. That is why, in the
call to `execl', `SHELL' is supplied once to name the program to
execute and a second time to supply a value for `argv[0]'.
The `execl' call in the child process doesn't return if it is
successful. If it fails, you must do something to make the child
process terminate. Just returning a bad status code with `return'
would leave two processes running the original program. Instead, the
right behavior is for the child process to report failure to its parent
process.
Call `_exit' to accomplish this. The reason for using `_exit'
instead of `exit' is to avoid flushing fully buffered streams such as
`stdout'. The buffers of these streams probably contain data that was
copied from the parent process by the `fork', data that will be output
eventually by the parent process. Calling `exit' in the child would
output the data twice. *Note Termination Internals::.

File: libc.info, Node: Job Control, Next: Name Service Switch, Prev: Processes, Up: Top
27 Job Control
**************
"Job control" refers to the protocol for allowing a user to move
between multiple "process groups" (or "jobs") within a single "login
session". The job control facilities are set up so that appropriate
behavior for most programs happens automatically and they need not do
anything special about job control. So you can probably ignore the
material in this chapter unless you are writing a shell or login
program.
You need to be familiar with concepts relating to process creation
(*note Process Creation Concepts::) and signal handling (*note Signal
Handling::) in order to understand this material presented in this
chapter.
* Menu:
* Concepts of Job Control:: Jobs can be controlled by a shell.
* Job Control is Optional:: Not all POSIX systems support job control.
* Controlling Terminal:: How a process gets its controlling terminal.
* Access to the Terminal:: How processes share the controlling terminal.
* Orphaned Process Groups:: Jobs left after the user logs out.
* Implementing a Shell:: What a shell must do to implement job control.
* Functions for Job Control:: Functions to control process groups.

File: libc.info, Node: Concepts of Job Control, Next: Job Control is Optional, Up: Job Control
27.1 Concepts of Job Control
============================
The fundamental purpose of an interactive shell is to read commands
from the user's terminal and create processes to execute the programs
specified by those commands. It can do this using the `fork' (*note
Creating a Process::) and `exec' (*note Executing a File::) functions.
A single command may run just one process--but often one command uses
several processes. If you use the `|' operator in a shell command, you
explicitly request several programs in their own processes. But even
if you run just one program, it can use multiple processes internally.
For example, a single compilation command such as `cc -c foo.c'
typically uses four processes (though normally only two at any given
time). If you run `make', its job is to run other programs in separate
processes.
The processes belonging to a single command are called a "process
group" or "job". This is so that you can operate on all of them at
once. For example, typing `C-c' sends the signal `SIGINT' to terminate
all the processes in the foreground process group.
A "session" is a larger group of processes. Normally all the
processes that stem from a single login belong to the same session.
Every process belongs to a process group. When a process is
created, it becomes a member of the same process group and session as
its parent process. You can put it in another process group using the
`setpgid' function, provided the process group belongs to the same
session.
The only way to put a process in a different session is to make it
the initial process of a new session, or a "session leader", using the
`setsid' function. This also puts the session leader into a new
process group, and you can't move it out of that process group again.
Usually, new sessions are created by the system login program, and
the session leader is the process running the user's login shell.
A shell that supports job control must arrange to control which job
can use the terminal at any time. Otherwise there might be multiple
jobs trying to read from the terminal at once, and confusion about which
process should receive the input typed by the user. To prevent this,
the shell must cooperate with the terminal driver using the protocol
described in this chapter.
The shell can give unlimited access to the controlling terminal to
only one process group at a time. This is called the "foreground job"
on that controlling terminal. Other process groups managed by the shell
that are executing without such access to the terminal are called
"background jobs".
If a background job needs to read from its controlling terminal, it
is "stopped" by the terminal driver; if the `TOSTOP' mode is set,
likewise for writing. The user can stop a foreground job by typing the
SUSP character (*note Special Characters::) and a program can stop any
job by sending it a `SIGSTOP' signal. It's the responsibility of the
shell to notice when jobs stop, to notify the user about them, and to
provide mechanisms for allowing the user to interactively continue
stopped jobs and switch jobs between foreground and background.
*Note Access to the Terminal::, for more information about I/O to the
controlling terminal,

File: libc.info, Node: Job Control is Optional, Next: Controlling Terminal, Prev: Concepts of Job Control, Up: Job Control
27.2 Job Control is Optional
============================
Not all operating systems support job control. GNU systems do support
job control, but if you are using the GNU C Library on some other
system, that system may not support job control itself.
You can use the `_POSIX_JOB_CONTROL' macro to test at compile-time
whether the system supports job control. *Note System Options::.
If job control is not supported, then there can be only one process
group per session, which behaves as if it were always in the foreground.
The functions for creating additional process groups simply fail with
the error code `ENOSYS'.
The macros naming the various job control signals (*note Job Control
Signals::) are defined even if job control is not supported. However,
the system never generates these signals, and attempts to send a job
control signal or examine or specify their actions report errors or do
nothing.

File: libc.info, Node: Controlling Terminal, Next: Access to the Terminal, Prev: Job Control is Optional, Up: Job Control
27.3 Controlling Terminal of a Process
======================================
One of the attributes of a process is its controlling terminal. Child
processes created with `fork' inherit the controlling terminal from
their parent process. In this way, all the processes in a session
inherit the controlling terminal from the session leader. A session
leader that has control of a terminal is called the "controlling
process" of that terminal.
You generally do not need to worry about the exact mechanism used to
allocate a controlling terminal to a session, since it is done for you
by the system when you log in.
An individual process disconnects from its controlling terminal when
it calls `setsid' to become the leader of a new session. *Note Process
Group Functions::.

File: libc.info, Node: Access to the Terminal, Next: Orphaned Process Groups, Prev: Controlling Terminal, Up: Job Control
27.4 Access to the Controlling Terminal
=======================================
Processes in the foreground job of a controlling terminal have
unrestricted access to that terminal; background processes do not. This
section describes in more detail what happens when a process in a
background job tries to access its controlling terminal.
When a process in a background job tries to read from its controlling
terminal, the process group is usually sent a `SIGTTIN' signal. This
normally causes all of the processes in that group to stop (unless they
handle the signal and don't stop themselves). However, if the reading
process is ignoring or blocking this signal, then `read' fails with an
`EIO' error instead.
Similarly, when a process in a background job tries to write to its
controlling terminal, the default behavior is to send a `SIGTTOU'
signal to the process group. However, the behavior is modified by the
`TOSTOP' bit of the local modes flags (*note Local Modes::). If this
bit is not set (which is the default), then writing to the controlling
terminal is always permitted without sending a signal. Writing is also
permitted if the `SIGTTOU' signal is being ignored or blocked by the
writing process.
Most other terminal operations that a program can do are treated as
reading or as writing. (The description of each operation should say
which.)
For more information about the primitive `read' and `write'
functions, see *note I/O Primitives::.

File: libc.info, Node: Orphaned Process Groups, Next: Implementing a Shell, Prev: Access to the Terminal, Up: Job Control
27.5 Orphaned Process Groups
============================
When a controlling process terminates, its terminal becomes free and a
new session can be established on it. (In fact, another user could log
in on the terminal.) This could cause a problem if any processes from
the old session are still trying to use that terminal.
To prevent problems, process groups that continue running even after
the session leader has terminated are marked as "orphaned process
groups".
When a process group becomes an orphan, its processes are sent a
`SIGHUP' signal. Ordinarily, this causes the processes to terminate.
However, if a program ignores this signal or establishes a handler for
it (*note Signal Handling::), it can continue running as in the orphan
process group even after its controlling process terminates; but it
still cannot access the terminal any more.

File: libc.info, Node: Implementing a Shell, Next: Functions for Job Control, Prev: Orphaned Process Groups, Up: Job Control
27.6 Implementing a Job Control Shell
=====================================
This section describes what a shell must do to implement job control, by
presenting an extensive sample program to illustrate the concepts
involved.
* Menu:
* Data Structures:: Introduction to the sample shell.
* Initializing the Shell:: What the shell must do to take
responsibility for job control.
* Launching Jobs:: Creating jobs to execute commands.
* Foreground and Background:: Putting a job in foreground of background.
* Stopped and Terminated Jobs:: Reporting job status.
* Continuing Stopped Jobs:: How to continue a stopped job in
the foreground or background.
* Missing Pieces:: Other parts of the shell.

File: libc.info, Node: Data Structures, Next: Initializing the Shell, Up: Implementing a Shell
27.6.1 Data Structures for the Shell
------------------------------------
All of the program examples included in this chapter are part of a
simple shell program. This section presents data structures and
utility functions which are used throughout the example.
The sample shell deals mainly with two data structures. The `job'
type contains information about a job, which is a set of subprocesses
linked together with pipes. The `process' type holds information about
a single subprocess. Here are the relevant data structure declarations:
/* A process is a single process. */
typedef struct process
{
struct process *next; /* next process in pipeline */
char **argv; /* for exec */
pid_t pid; /* process ID */
char completed; /* true if process has completed */
char stopped; /* true if process has stopped */
int status; /* reported status value */
} process;
/* A job is a pipeline of processes. */
typedef struct job
{
struct job *next; /* next active job */
char *command; /* command line, used for messages */
process *first_process; /* list of processes in this job */
pid_t pgid; /* process group ID */
char notified; /* true if user told about stopped job */
struct termios tmodes; /* saved terminal modes */
int stdin, stdout, stderr; /* standard i/o channels */
} job;
/* The active jobs are linked into a list. This is its head. */
job *first_job = NULL;
Here are some utility functions that are used for operating on `job'
objects.
/* Find the active job with the indicated PGID. */
job *
find_job (pid_t pgid)
{
job *j;
for (j = first_job; j; j = j->next)
if (j->pgid == pgid)
return j;
return NULL;
}
/* Return true if all processes in the job have stopped or completed. */
int
job_is_stopped (job *j)
{
process *p;
for (p = j->first_process; p; p = p->next)
if (!p->completed && !p->stopped)
return 0;
return 1;
}
/* Return true if all processes in the job have completed. */
int
job_is_completed (job *j)
{
process *p;
for (p = j->first_process; p; p = p->next)
if (!p->completed)
return 0;
return 1;
}

File: libc.info, Node: Initializing the Shell, Next: Launching Jobs, Prev: Data Structures, Up: Implementing a Shell
27.6.2 Initializing the Shell
-----------------------------
When a shell program that normally performs job control is started, it
has to be careful in case it has been invoked from another shell that is
already doing its own job control.
A subshell that runs interactively has to ensure that it has been
placed in the foreground by its parent shell before it can enable job
control itself. It does this by getting its initial process group ID
with the `getpgrp' function, and comparing it to the process group ID
of the current foreground job associated with its controlling terminal
(which can be retrieved using the `tcgetpgrp' function).
If the subshell is not running as a foreground job, it must stop
itself by sending a `SIGTTIN' signal to its own process group. It may
not arbitrarily put itself into the foreground; it must wait for the
user to tell the parent shell to do this. If the subshell is continued
again, it should repeat the check and stop itself again if it is still
not in the foreground.
Once the subshell has been placed into the foreground by its parent
shell, it can enable its own job control. It does this by calling
`setpgid' to put itself into its own process group, and then calling
`tcsetpgrp' to place this process group into the foreground.
When a shell enables job control, it should set itself to ignore all
the job control stop signals so that it doesn't accidentally stop
itself. You can do this by setting the action for all the stop signals
to `SIG_IGN'.
A subshell that runs non-interactively cannot and should not support
job control. It must leave all processes it creates in the same process
group as the shell itself; this allows the non-interactive shell and its
child processes to be treated as a single job by the parent shell. This
is easy to do--just don't use any of the job control primitives--but
you must remember to make the shell do it.
Here is the initialization code for the sample shell that shows how
to do all of this.
/* Keep track of attributes of the shell. */
#include <sys/types.h>
#include <termios.h>
#include <unistd.h>
pid_t shell_pgid;
struct termios shell_tmodes;
int shell_terminal;
int shell_is_interactive;
/* Make sure the shell is running interactively as the foreground job
before proceeding. */
void
init_shell ()
{
/* See if we are running interactively. */
shell_terminal = STDIN_FILENO;
shell_is_interactive = isatty (shell_terminal);
if (shell_is_interactive)
{
/* Loop until we are in the foreground. */
while (tcgetpgrp (shell_terminal) != (shell_pgid = getpgrp ()))
kill (- shell_pgid, SIGTTIN);
/* Ignore interactive and job-control signals. */
signal (SIGINT, SIG_IGN);
signal (SIGQUIT, SIG_IGN);
signal (SIGTSTP, SIG_IGN);
signal (SIGTTIN, SIG_IGN);
signal (SIGTTOU, SIG_IGN);
signal (SIGCHLD, SIG_IGN);
/* Put ourselves in our own process group. */
shell_pgid = getpid ();
if (setpgid (shell_pgid, shell_pgid) < 0)
{
perror ("Couldn't put the shell in its own process group");
exit (1);
}
/* Grab control of the terminal. */
tcsetpgrp (shell_terminal, shell_pgid);
/* Save default terminal attributes for shell. */
tcgetattr (shell_terminal, &shell_tmodes);
}
}

File: libc.info, Node: Launching Jobs, Next: Foreground and Background, Prev: Initializing the Shell, Up: Implementing a Shell
27.6.3 Launching Jobs
---------------------
Once the shell has taken responsibility for performing job control on
its controlling terminal, it can launch jobs in response to commands
typed by the user.
To create the processes in a process group, you use the same `fork'
and `exec' functions described in *note Process Creation Concepts::.
Since there are multiple child processes involved, though, things are a
little more complicated and you must be careful to do things in the
right order. Otherwise, nasty race conditions can result.
You have two choices for how to structure the tree of parent-child
relationships among the processes. You can either make all the
processes in the process group be children of the shell process, or you
can make one process in group be the ancestor of all the other processes
in that group. The sample shell program presented in this chapter uses
the first approach because it makes bookkeeping somewhat simpler.
As each process is forked, it should put itself in the new process
group by calling `setpgid'; see *note Process Group Functions::. The
first process in the new group becomes its "process group leader", and
its process ID becomes the "process group ID" for the group.
The shell should also call `setpgid' to put each of its child
processes into the new process group. This is because there is a
potential timing problem: each child process must be put in the process
group before it begins executing a new program, and the shell depends on
having all the child processes in the group before it continues
executing. If both the child processes and the shell call `setpgid',
this ensures that the right things happen no matter which process gets
to it first.
If the job is being launched as a foreground job, the new process
group also needs to be put into the foreground on the controlling
terminal using `tcsetpgrp'. Again, this should be done by the shell as
well as by each of its child processes, to avoid race conditions.
The next thing each child process should do is to reset its signal
actions.
During initialization, the shell process set itself to ignore job
control signals; see *note Initializing the Shell::. As a result, any
child processes it creates also ignore these signals by inheritance.
This is definitely undesirable, so each child process should explicitly
set the actions for these signals back to `SIG_DFL' just after it is
forked.
Since shells follow this convention, applications can assume that
they inherit the correct handling of these signals from the parent
process. But every application has a responsibility not to mess up the
handling of stop signals. Applications that disable the normal
interpretation of the SUSP character should provide some other
mechanism for the user to stop the job. When the user invokes this
mechanism, the program should send a `SIGTSTP' signal to the process
group of the process, not just to the process itself. *Note Signaling
Another Process::.
Finally, each child process should call `exec' in the normal way.
This is also the point at which redirection of the standard input and
output channels should be handled. *Note Duplicating Descriptors::,
for an explanation of how to do this.
Here is the function from the sample shell program that is
responsible for launching a program. The function is executed by each
child process immediately after it has been forked by the shell, and
never returns.
void
launch_process (process *p, pid_t pgid,
int infile, int outfile, int errfile,
int foreground)
{
pid_t pid;
if (shell_is_interactive)
{
/* Put the process into the process group and give the process group
the terminal, if appropriate.
This has to be done both by the shell and in the individual
child processes because of potential race conditions. */
pid = getpid ();
if (pgid == 0) pgid = pid;
setpgid (pid, pgid);
if (foreground)
tcsetpgrp (shell_terminal, pgid);
/* Set the handling for job control signals back to the default. */
signal (SIGINT, SIG_DFL);
signal (SIGQUIT, SIG_DFL);
signal (SIGTSTP, SIG_DFL);
signal (SIGTTIN, SIG_DFL);
signal (SIGTTOU, SIG_DFL);
signal (SIGCHLD, SIG_DFL);
}
/* Set the standard input/output channels of the new process. */
if (infile != STDIN_FILENO)
{
dup2 (infile, STDIN_FILENO);
close (infile);
}
if (outfile != STDOUT_FILENO)
{
dup2 (outfile, STDOUT_FILENO);
close (outfile);
}
if (errfile != STDERR_FILENO)
{
dup2 (errfile, STDERR_FILENO);
close (errfile);
}
/* Exec the new process. Make sure we exit. */
execvp (p->argv[0], p->argv);
perror ("execvp");
exit (1);
}
If the shell is not running interactively, this function does not do
anything with process groups or signals. Remember that a shell not
performing job control must keep all of its subprocesses in the same
process group as the shell itself.
Next, here is the function that actually launches a complete job.
After creating the child processes, this function calls some other
functions to put the newly created job into the foreground or
background; these are discussed in *note Foreground and Background::.
void
launch_job (job *j, int foreground)
{
process *p;
pid_t pid;
int mypipe[2], infile, outfile;
infile = j->stdin;
for (p = j->first_process; p; p = p->next)
{
/* Set up pipes, if necessary. */
if (p->next)
{
if (pipe (mypipe) < 0)
{
perror ("pipe");
exit (1);
}
outfile = mypipe[1];
}
else
outfile = j->stdout;
/* Fork the child processes. */
pid = fork ();
if (pid == 0)
/* This is the child process. */
launch_process (p, j->pgid, infile,
outfile, j->stderr, foreground);
else if (pid < 0)
{
/* The fork failed. */
perror ("fork");
exit (1);
}
else
{
/* This is the parent process. */
p->pid = pid;
if (shell_is_interactive)
{
if (!j->pgid)
j->pgid = pid;
setpgid (pid, j->pgid);
}
}
/* Clean up after pipes. */
if (infile != j->stdin)
close (infile);
if (outfile != j->stdout)
close (outfile);
infile = mypipe[0];
}
format_job_info (j, "launched");
if (!shell_is_interactive)
wait_for_job (j);
else if (foreground)
put_job_in_foreground (j, 0);
else
put_job_in_background (j, 0);
}

File: libc.info, Node: Foreground and Background, Next: Stopped and Terminated Jobs, Prev: Launching Jobs, Up: Implementing a Shell
27.6.4 Foreground and Background
--------------------------------
Now let's consider what actions must be taken by the shell when it
launches a job into the foreground, and how this differs from what must
be done when a background job is launched.
When a foreground job is launched, the shell must first give it
access to the controlling terminal by calling `tcsetpgrp'. Then, the
shell should wait for processes in that process group to terminate or
stop. This is discussed in more detail in *note Stopped and Terminated
Jobs::.
When all of the processes in the group have either completed or
stopped, the shell should regain control of the terminal for its own
process group by calling `tcsetpgrp' again. Since stop signals caused
by I/O from a background process or a SUSP character typed by the user
are sent to the process group, normally all the processes in the job
stop together.
The foreground job may have left the terminal in a strange state, so
the shell should restore its own saved terminal modes before
continuing. In case the job is merely stopped, the shell should first
save the current terminal modes so that it can restore them later if
the job is continued. The functions for dealing with terminal modes are
`tcgetattr' and `tcsetattr'; these are described in *note Terminal
Modes::.
Here is the sample shell's function for doing all of this.
/* Put job J in the foreground. If CONT is nonzero,
restore the saved terminal modes and send the process group a
`SIGCONT' signal to wake it up before we block. */
void
put_job_in_foreground (job *j, int cont)
{
/* Put the job into the foreground. */
tcsetpgrp (shell_terminal, j->pgid);
/* Send the job a continue signal, if necessary. */
if (cont)
{
tcsetattr (shell_terminal, TCSADRAIN, &j->tmodes);
if (kill (- j->pgid, SIGCONT) < 0)
perror ("kill (SIGCONT)");
}
/* Wait for it to report. */
wait_for_job (j);
/* Put the shell back in the foreground. */
tcsetpgrp (shell_terminal, shell_pgid);
/* Restore the shell's terminal modes. */
tcgetattr (shell_terminal, &j->tmodes);
tcsetattr (shell_terminal, TCSADRAIN, &shell_tmodes);
}
If the process group is launched as a background job, the shell
should remain in the foreground itself and continue to read commands
from the terminal.
In the sample shell, there is not much that needs to be done to put
a job into the background. Here is the function it uses:
/* Put a job in the background. If the cont argument is true, send
the process group a `SIGCONT' signal to wake it up. */
void
put_job_in_background (job *j, int cont)
{
/* Send the job a continue signal, if necessary. */
if (cont)
if (kill (-j->pgid, SIGCONT) < 0)
perror ("kill (SIGCONT)");
}

File: libc.info, Node: Stopped and Terminated Jobs, Next: Continuing Stopped Jobs, Prev: Foreground and Background, Up: Implementing a Shell
27.6.5 Stopped and Terminated Jobs
----------------------------------
When a foreground process is launched, the shell must block until all of
the processes in that job have either terminated or stopped. It can do
this by calling the `waitpid' function; see *note Process Completion::.
Use the `WUNTRACED' option so that status is reported for processes
that stop as well as processes that terminate.
The shell must also check on the status of background jobs so that it
can report terminated and stopped jobs to the user; this can be done by
calling `waitpid' with the `WNOHANG' option. A good place to put a
such a check for terminated and stopped jobs is just before prompting
for a new command.
The shell can also receive asynchronous notification that there is
status information available for a child process by establishing a
handler for `SIGCHLD' signals. *Note Signal Handling::.
In the sample shell program, the `SIGCHLD' signal is normally
ignored. This is to avoid reentrancy problems involving the global data
structures the shell manipulates. But at specific times when the shell
is not using these data structures--such as when it is waiting for
input on the terminal--it makes sense to enable a handler for
`SIGCHLD'. The same function that is used to do the synchronous status
checks (`do_job_notification', in this case) can also be called from
within this handler.
Here are the parts of the sample shell program that deal with
checking the status of jobs and reporting the information to the user.
/* Store the status of the process PID that was returned by waitpid.
Return 0 if all went well, nonzero otherwise. */
int
mark_process_status (pid_t pid, int status)
{
job *j;
process *p;
if (pid > 0)
{
/* Update the record for the process. */
for (j = first_job; j; j = j->next)
for (p = j->first_process; p; p = p->next)
if (p->pid == pid)
{
p->status = status;
if (WIFSTOPPED (status))
p->stopped = 1;
else
{
p->completed = 1;
if (WIFSIGNALED (status))
fprintf (stderr, "%d: Terminated by signal %d.\n",
(int) pid, WTERMSIG (p->status));
}
return 0;
}
fprintf (stderr, "No child process %d.\n", pid);
return -1;
}
else if (pid == 0 || errno == ECHILD)
/* No processes ready to report. */
return -1;
else {
/* Other weird errors. */
perror ("waitpid");
return -1;
}
}
/* Check for processes that have status information available,
without blocking. */
void
update_status (void)
{
int status;
pid_t pid;
do
pid = waitpid (WAIT_ANY, &status, WUNTRACED|WNOHANG);
while (!mark_process_status (pid, status));
}
/* Check for processes that have status information available,
blocking until all processes in the given job have reported. */
void
wait_for_job (job *j)
{
int status;
pid_t pid;
do
pid = waitpid (WAIT_ANY, &status, WUNTRACED);
while (!mark_process_status (pid, status)
&& !job_is_stopped (j)
&& !job_is_completed (j));
}
/* Format information about job status for the user to look at. */
void
format_job_info (job *j, const char *status)
{
fprintf (stderr, "%ld (%s): %s\n", (long)j->pgid, status, j->command);
}
/* Notify the user about stopped or terminated jobs.
Delete terminated jobs from the active job list. */
void
do_job_notification (void)
{
job *j, *jlast, *jnext;
process *p;
/* Update status information for child processes. */
update_status ();
jlast = NULL;
for (j = first_job; j; j = jnext)
{
jnext = j->next;
/* If all processes have completed, tell the user the job has
completed and delete it from the list of active jobs. */
if (job_is_completed (j)) {
format_job_info (j, "completed");
if (jlast)
jlast->next = jnext;
else
first_job = jnext;
free_job (j);
}
/* Notify the user about stopped jobs,
marking them so that we won't do this more than once. */
else if (job_is_stopped (j) && !j->notified) {
format_job_info (j, "stopped");
j->notified = 1;
jlast = j;
}
/* Don't say anything about jobs that are still running. */
else
jlast = j;
}
}

File: libc.info, Node: Continuing Stopped Jobs, Next: Missing Pieces, Prev: Stopped and Terminated Jobs, Up: Implementing a Shell
27.6.6 Continuing Stopped Jobs
------------------------------
The shell can continue a stopped job by sending a `SIGCONT' signal to
its process group. If the job is being continued in the foreground,
the shell should first invoke `tcsetpgrp' to give the job access to the
terminal, and restore the saved terminal settings. After continuing a
job in the foreground, the shell should wait for the job to stop or
complete, as if the job had just been launched in the foreground.
The sample shell program handles both newly created and continued
jobs with the same pair of functions, `put_job_in_foreground' and
`put_job_in_background'. The definitions of these functions were given
in *note Foreground and Background::. When continuing a stopped job, a
nonzero value is passed as the CONT argument to ensure that the
`SIGCONT' signal is sent and the terminal modes reset, as appropriate.
This leaves only a function for updating the shell's internal
bookkeeping about the job being continued:
/* Mark a stopped job J as being running again. */
void
mark_job_as_running (job *j)
{
Process *p;
for (p = j->first_process; p; p = p->next)
p->stopped = 0;
j->notified = 0;
}
/* Continue the job J. */
void
continue_job (job *j, int foreground)
{
mark_job_as_running (j);
if (foreground)
put_job_in_foreground (j, 1);
else
put_job_in_background (j, 1);
}

File: libc.info, Node: Missing Pieces, Prev: Continuing Stopped Jobs, Up: Implementing a Shell
27.6.7 The Missing Pieces
-------------------------
The code extracts for the sample shell included in this chapter are only
a part of the entire shell program. In particular, nothing at all has
been said about how `job' and `program' data structures are allocated
and initialized.
Most real shells provide a complex user interface that has support
for a command language; variables; abbreviations, substitutions, and
pattern matching on file names; and the like. All of this is far too
complicated to explain here! Instead, we have concentrated on showing
how to implement the core process creation and job control functions
that can be called from such a shell.
Here is a table summarizing the major entry points we have presented:
`void init_shell (void)'
Initialize the shell's internal state. *Note Initializing the
Shell::.
`void launch_job (job *J, int FOREGROUND)'
Launch the job J as either a foreground or background job. *Note
Launching Jobs::.
`void do_job_notification (void)'
Check for and report any jobs that have terminated or stopped.
Can be called synchronously or within a handler for `SIGCHLD'
signals. *Note Stopped and Terminated Jobs::.
`void continue_job (job *J, int FOREGROUND)'
Continue the job J. *Note Continuing Stopped Jobs::.
Of course, a real shell would also want to provide other functions
for managing jobs. For example, it would be useful to have commands to
list all active jobs or to send a signal (such as `SIGKILL') to a job.

File: libc.info, Node: Functions for Job Control, Prev: Implementing a Shell, Up: Job Control
27.7 Functions for Job Control
==============================
This section contains detailed descriptions of the functions relating
to job control.
* Menu:
* Identifying the Terminal:: Determining the controlling terminal's name.
* Process Group Functions:: Functions for manipulating process groups.
* Terminal Access Functions:: Functions for controlling terminal access.

File: libc.info, Node: Identifying the Terminal, Next: Process Group Functions, Up: Functions for Job Control
27.7.1 Identifying the Controlling Terminal
-------------------------------------------
You can use the `ctermid' function to get a file name that you can use
to open the controlling terminal. In the GNU C Library, it returns the
same string all the time: `"/dev/tty"'. That is a special "magic" file
name that refers to the controlling terminal of the current process (if
it has one). To find the name of the specific terminal device, use
`ttyname'; *note Is It a Terminal::.
The function `ctermid' is declared in the header file `stdio.h'.
-- Function: char * ctermid (char *STRING)
The `ctermid' function returns a string containing the file name of
the controlling terminal for the current process. If STRING is
not a null pointer, it should be an array that can hold at least
`L_ctermid' characters; the string is returned in this array.
Otherwise, a pointer to a string in a static area is returned,
which might get overwritten on subsequent calls to this function.
An empty string is returned if the file name cannot be determined
for any reason. Even if a file name is returned, access to the
file it represents is not guaranteed.
-- Macro: int L_ctermid
The value of this macro is an integer constant expression that
represents the size of a string large enough to hold the file name
returned by `ctermid'.
See also the `isatty' and `ttyname' functions, in *note Is It a
Terminal::.

File: libc.info, Node: Process Group Functions, Next: Terminal Access Functions, Prev: Identifying the Terminal, Up: Functions for Job Control
27.7.2 Process Group Functions
------------------------------
Here are descriptions of the functions for manipulating process groups.
Your program should include the header files `sys/types.h' and
`unistd.h' to use these functions.
-- Function: pid_t setsid (void)
The `setsid' function creates a new session. The calling process
becomes the session leader, and is put in a new process group whose
process group ID is the same as the process ID of that process.
There are initially no other processes in the new process group,
and no other process groups in the new session.
This function also makes the calling process have no controlling
terminal.
The `setsid' function returns the new process group ID of the
calling process if successful. A return value of `-1' indicates an
error. The following `errno' error conditions are defined for this
function:
`EPERM'
The calling process is already a process group leader, or
there is already another process group around that has the
same process group ID.
-- Function: pid_t getsid (pid_t PID)
The `getsid' function returns the process group ID of the session
leader of the specified process. If a PID is `0', the process
group ID of the session leader of the current process is returned.
In case of error `-1' is returned and `errno' is set. The
following `errno' error conditions are defined for this function:
`ESRCH'
There is no process with the given process ID PID.
`EPERM'
The calling process and the process specified by PID are in
different sessions, and the implementation doesn't allow to
access the process group ID of the session leader of the
process with ID PID from the calling process.
The `getpgrp' function has two definitions: one derived from BSD
Unix, and one from the POSIX.1 standard. The feature test macros you
have selected (*note Feature Test Macros::) determine which definition
you get. Specifically, you get the BSD version if you define
`_BSD_SOURCE'; otherwise, you get the POSIX version if you define
`_POSIX_SOURCE' or `_GNU_SOURCE'. Programs written for old BSD systems
will not include `unistd.h', which defines `getpgrp' specially under
`_BSD_SOURCE'. You must link such programs with the `-lbsd-compat'
option to get the BSD definition.
-- POSIX.1 Function: pid_t getpgrp (void)
The POSIX.1 definition of `getpgrp' returns the process group ID of
the calling process.
-- BSD Function: pid_t getpgrp (pid_t PID)
The BSD definition of `getpgrp' returns the process group ID of the
process PID. You can supply a value of `0' for the PID argument
to get information about the calling process.
-- System V Function: int getpgid (pid_t PID)
`getpgid' is the same as the BSD function `getpgrp'. It returns
the process group ID of the process PID. You can supply a value
of `0' for the PID argument to get information about the calling
process.
In case of error `-1' is returned and `errno' is set. The
following `errno' error conditions are defined for this function:
`ESRCH'
There is no process with the given process ID PID. The
calling process and the process specified by PID are in
different sessions, and the implementation doesn't allow to
access the process group ID of the process with ID PID from
the calling process.
-- Function: int setpgid (pid_t PID, pid_t PGID)
The `setpgid' function puts the process PID into the process group
PGID. As a special case, either PID or PGID can be zero to
indicate the process ID of the calling process.
This function fails on a system that does not support job control.
*Note Job Control is Optional::, for more information.
If the operation is successful, `setpgid' returns zero. Otherwise
it returns `-1'. The following `errno' error conditions are
defined for this function:
`EACCES'
The child process named by PID has executed an `exec'
function since it was forked.
`EINVAL'
The value of the PGID is not valid.
`ENOSYS'
The system doesn't support job control.
`EPERM'
The process indicated by the PID argument is a session leader,
or is not in the same session as the calling process, or the
value of the PGID argument doesn't match a process group ID
in the same session as the calling process.
`ESRCH'
The process indicated by the PID argument is not the calling
process or a child of the calling process.
-- Function: int setpgrp (pid_t PID, pid_t PGID)
This is the BSD Unix name for `setpgid'. Both functions do exactly
the same thing.

File: libc.info, Node: Terminal Access Functions, Prev: Process Group Functions, Up: Functions for Job Control
27.7.3 Functions for Controlling Terminal Access
------------------------------------------------
These are the functions for reading or setting the foreground process
group of a terminal. You should include the header files `sys/types.h'
and `unistd.h' in your application to use these functions.
Although these functions take a file descriptor argument to specify
the terminal device, the foreground job is associated with the terminal
file itself and not a particular open file descriptor.
-- Function: pid_t tcgetpgrp (int FILEDES)
This function returns the process group ID of the foreground
process group associated with the terminal open on descriptor
FILEDES.
If there is no foreground process group, the return value is a
number greater than `1' that does not match the process group ID
of any existing process group. This can happen if all of the
processes in the job that was formerly the foreground job have
terminated, and no other job has yet been moved into the
foreground.
In case of an error, a value of `-1' is returned. The following
`errno' error conditions are defined for this function:
`EBADF'
The FILEDES argument is not a valid file descriptor.
`ENOSYS'
The system doesn't support job control.
`ENOTTY'
The terminal file associated with the FILEDES argument isn't
the controlling terminal of the calling process.
-- Function: int tcsetpgrp (int FILEDES, pid_t PGID)
This function is used to set a terminal's foreground process group
ID. The argument FILEDES is a descriptor which specifies the
terminal; PGID specifies the process group. The calling process
must be a member of the same session as PGID and must have the same
controlling terminal.
For terminal access purposes, this function is treated as output.
If it is called from a background process on its controlling
terminal, normally all processes in the process group are sent a
`SIGTTOU' signal. The exception is if the calling process itself
is ignoring or blocking `SIGTTOU' signals, in which case the
operation is performed and no signal is sent.
If successful, `tcsetpgrp' returns `0'. A return value of `-1'
indicates an error. The following `errno' error conditions are
defined for this function:
`EBADF'
The FILEDES argument is not a valid file descriptor.
`EINVAL'
The PGID argument is not valid.
`ENOSYS'
The system doesn't support job control.
`ENOTTY'
The FILEDES isn't the controlling terminal of the calling
process.
`EPERM'
The PGID isn't a process group in the same session as the
calling process.
-- Function: pid_t tcgetsid (int FILDES)
This function is used to obtain the process group ID of the session
for which the terminal specified by FILDES is the controlling
terminal. If the call is successful the group ID is returned.
Otherwise the return value is `(pid_t) -1' and the global variable
ERRNO is set to the following value:
`EBADF'
The FILEDES argument is not a valid file descriptor.
`ENOTTY'
The calling process does not have a controlling terminal, or
the file is not the controlling terminal.

File: libc.info, Node: Name Service Switch, Next: Users and Groups, Prev: Job Control, Up: Top
28 System Databases and Name Service Switch
*******************************************
Various functions in the C Library need to be configured to work
correctly in the local environment. Traditionally, this was done by
using files (e.g., `/etc/passwd'), but other nameservices (like the
Network Information Service (NIS) and the Domain Name Service (DNS))
became popular, and were hacked into the C library, usually with a fixed
search order.
The GNU C Library contains a cleaner solution of this problem. It is
designed after a method used by Sun Microsystems in the C library of
Solaris 2. The GNU C Library follows their name and calls this scheme
"Name Service Switch" (NSS).
Though the interface might be similar to Sun's version there is no
common code. We never saw any source code of Sun's implementation and
so the internal interface is incompatible. This also manifests in the
file names we use as we will see later.
* Menu:
* NSS Basics:: What is this NSS good for.
* NSS Configuration File:: Configuring NSS.
* NSS Module Internals:: How does it work internally.
* Extending NSS:: What to do to add services or databases.

File: libc.info, Node: NSS Basics, Next: NSS Configuration File, Prev: Name Service Switch, Up: Name Service Switch
28.1 NSS Basics
===============
The basic idea is to put the implementation of the different services
offered to access the databases in separate modules. This has some
advantages:
1. Contributors can add new services without adding them to the GNU C
Library.
2. The modules can be updated separately.
3. The C library image is smaller.
To fulfill the first goal above the ABI of the modules will be
described below. For getting the implementation of a new service right
it is important to understand how the functions in the modules get
called. They are in no way designed to be used by the programmer
directly. Instead the programmer should only use the documented and
standardized functions to access the databases.
The databases available in the NSS are
`aliases'
Mail aliases
`ethers'
Ethernet numbers,
`group'
Groups of users, *note Group Database::.
`hosts'
Host names and numbers, *note Host Names::.
`netgroup'
Network wide list of host and users, *note Netgroup Database::.
`networks'
Network names and numbers, *note Networks Database::.
`protocols'
Network protocols, *note Protocols Database::.
`passwd'
User passwords, *note User Database::.
`rpc'
Remote procedure call names and numbers,
`services'
Network services, *note Services Database::.
`shadow'
Shadow user passwords,
There will be some more added later (`automount', `bootparams',
`netmasks', and `publickey').

File: libc.info, Node: NSS Configuration File, Next: NSS Module Internals, Prev: NSS Basics, Up: Name Service Switch
28.2 The NSS Configuration File
===============================
Somehow the NSS code must be told about the wishes of the user. For
this reason there is the file `/etc/nsswitch.conf'. For each database
this file contain a specification how the lookup process should work.
The file could look like this:
# /etc/nsswitch.conf
#
# Name Service Switch configuration file.
#
passwd: db files nis
shadow: files
group: db files nis
hosts: files nisplus nis dns
networks: nisplus [NOTFOUND=return] files
ethers: nisplus [NOTFOUND=return] db files
protocols: nisplus [NOTFOUND=return] db files
rpc: nisplus [NOTFOUND=return] db files
services: nisplus [NOTFOUND=return] db files
The first column is the database as you can guess from the table
above. The rest of the line specifies how the lookup process works.
Please note that you specify the way it works for each database
individually. This cannot be done with the old way of a monolithic
implementation.
The configuration specification for each database can contain two
different items:
* the service specification like `files', `db', or `nis'.
* the reaction on lookup result like `[NOTFOUND=return]'.
* Menu:
* Services in the NSS configuration:: Service names in the NSS configuration.
* Actions in the NSS configuration:: React appropriately to the lookup result.
* Notes on NSS Configuration File:: Things to take care about while
configuring NSS.

File: libc.info, Node: Services in the NSS configuration, Next: Actions in the NSS configuration, Prev: NSS Configuration File, Up: NSS Configuration File
28.2.1 Services in the NSS configuration File
---------------------------------------------
The above example file mentions five different services: `files', `db',
`dns', `nis', and `nisplus'. This does not mean these services are
available on all sites and it does also not mean these are all the
services which will ever be available.
In fact, these names are simply strings which the NSS code uses to
find the implicitly addressed functions. The internal interface will be
described later. Visible to the user are the modules which implement an
individual service.
Assume the service NAME shall be used for a lookup. The code for
this service is implemented in a module called `libnss_NAME'. On a
system supporting shared libraries this is in fact a shared library
with the name (for example) `libnss_NAME.so.2'. The number at the end
is the currently used version of the interface which will not change
frequently. Normally the user should not have to be cognizant of these
files since they should be placed in a directory where they are found
automatically. Only the names of all available services are important.

File: libc.info, Node: Actions in the NSS configuration, Next: Notes on NSS Configuration File, Prev: Services in the NSS configuration, Up: NSS Configuration File
28.2.2 Actions in the NSS configuration
---------------------------------------
The second item in the specification gives the user much finer control
on the lookup process. Action items are placed between two service
names and are written within brackets. The general form is
`[' ( `!'? STATUS `=' ACTION )+ `]'
where
STATUS => success | notfound | unavail | tryagain
ACTION => return | continue
The case of the keywords is insignificant. The STATUS values are
the results of a call to a lookup function of a specific service. They
mean
`success'
No error occurred and the wanted entry is returned. The default
action for this is `return'.
`notfound'
The lookup process works ok but the needed value was not found.
The default action is `continue'.
`unavail'
The service is permanently unavailable. This can either mean the
needed file is not available, or, for DNS, the server is not
available or does not allow queries. The default action is
`continue'.
`tryagain'
The service is temporarily unavailable. This could mean a file is
locked or a server currently cannot accept more connections. The
default action is `continue'.
If we have a line like
ethers: nisplus [NOTFOUND=return] db files
this is equivalent to
ethers: nisplus [SUCCESS=return NOTFOUND=return UNAVAIL=continue
TRYAGAIN=continue]
db [SUCCESS=return NOTFOUND=continue UNAVAIL=continue
TRYAGAIN=continue]
files
(except that it would have to be written on one line). The default
value for the actions are normally what you want, and only need to be
changed in exceptional cases.
If the optional `!' is placed before the STATUS this means the
following action is used for all statuses but STATUS itself. I.e., `!'
is negation as in the C language (and others).
Before we explain the exception which makes this action item
necessary one more remark: obviously it makes no sense to add another
action item after the `files' service. Since there is no other service
following the action _always_ is `return'.
Now, why is this `[NOTFOUND=return]' action useful? To understand
this we should know that the `nisplus' service is often complete; i.e.,
if an entry is not available in the NIS+ tables it is not available
anywhere else. This is what is expressed by this action item: it is
useless to examine further services since they will not give us a
result.
The situation would be different if the NIS+ service is not available
because the machine is booting. In this case the return value of the
lookup function is not `notfound' but instead `unavail'. And as you
can see in the complete form above: in this situation the `db' and
`files' services are used. Neat, isn't it? The system administrator
need not pay special care for the time the system is not completely
ready to work (while booting or shutdown or network problems).

File: libc.info, Node: Notes on NSS Configuration File, Prev: Actions in the NSS configuration, Up: NSS Configuration File
28.2.3 Notes on the NSS Configuration File
------------------------------------------
Finally a few more hints. The NSS implementation is not completely
helpless if `/etc/nsswitch.conf' does not exist. For all supported
databases there is a default value so it should normally be possible to
get the system running even if the file is corrupted or missing.
For the `hosts' and `networks' databases the default value is `dns
[!UNAVAIL=return] files'. I.e., the system is prepared for the DNS
service not to be available but if it is available the answer it
returns is definitive.
The `passwd', `group', and `shadow' databases are traditionally
handled in a special way. The appropriate files in the `/etc'
directory are read but if an entry with a name starting with a `+'
character is found NIS is used. This kind of lookup remains possible
by using the special lookup service `compat' and the default value for
the three databases above is `compat [NOTFOUND=return] files'.
For all other databases the default value is `nis [NOTFOUND=return]
files'. This solution give the best chance to be correct since NIS and
file based lookup is used.
A second point is that the user should try to optimize the lookup
process. The different service have different response times. A
simple file look up on a local file could be fast, but if the file is
long and the needed entry is near the end of the file this may take
quite some time. In this case it might be better to use the `db'
service which allows fast local access to large data sets.
Often the situation is that some global information like NIS must be
used. So it is unavoidable to use service entries like `nis' etc. But
one should avoid slow services like this if possible.

File: libc.info, Node: NSS Module Internals, Next: Extending NSS, Prev: NSS Configuration File, Up: Name Service Switch
28.3 NSS Module Internals
=========================
Now it is time to describe what the modules look like. The functions
contained in a module are identified by their names. I.e., there is no
jump table or the like. How this is done is of no interest here; those
interested in this topic should read about Dynamic Linking.
* Menu:
* NSS Module Names:: Construction of the interface function of
the NSS modules.
* NSS Modules Interface:: Programming interface in the NSS module
functions.

File: libc.info, Node: NSS Module Names, Next: NSS Modules Interface, Prev: NSS Module Internals, Up: NSS Module Internals
28.3.1 The Naming Scheme of the NSS Modules
-------------------------------------------
The name of each function consist of various parts:
_nss_SERVICE_FUNCTION
SERVICE of course corresponds to the name of the module this
function is found in.(1) The FUNCTION part is derived from the
interface function in the C library itself. If the user calls the
function `gethostbyname' and the service used is `files' the function
_nss_files_gethostbyname_r
in the module
libnss_files.so.2
is used. You see, what is explained above in not the whole truth. In
fact the NSS modules only contain reentrant versions of the lookup
functions. I.e., if the user would call the `gethostbyname_r' function
this also would end in the above function. For all user interface
functions the C library maps this call to a call to the reentrant
function. For reentrant functions this is trivial since the interface
is (nearly) the same. For the non-reentrant version The library keeps
internal buffers which are used to replace the user supplied buffer.
I.e., the reentrant functions _can_ have counterparts. No service
module is forced to have functions for all databases and all kinds to
access them. If a function is not available it is simply treated as if
the function would return `unavail' (*note Actions in the NSS
configuration::).
The file name `libnss_files.so.2' would be on a Solaris 2 system
`nss_files.so.2'. This is the difference mentioned above. Sun's NSS
modules are usable as modules which get indirectly loaded only.
The NSS modules in the GNU C Library are prepared to be used as
normal libraries themselves. This is _not_ true at the moment, though.
However, the organization of the name space in the modules does not
make it impossible like it is for Solaris. Now you can see why the
modules are still libraries.(2)
---------- Footnotes ----------
(1) Now you might ask why this information is duplicated. The
answer is that we want to make it possible to link directly with these
shared objects.
(2) There is a second explanation: we were too lazy to change the
Makefiles to allow the generation of shared objects not starting with
`lib' but don't tell this to anybody.

File: libc.info, Node: NSS Modules Interface, Prev: NSS Module Names, Up: NSS Module Internals
28.3.2 The Interface of the Function in NSS Modules
---------------------------------------------------
Now we know about the functions contained in the modules. It is now
time to describe the types. When we mentioned the reentrant versions of
the functions above, this means there are some additional arguments
(compared with the standard, non-reentrant version). The prototypes for
the non-reentrant and reentrant versions of our function above are:
struct hostent *gethostbyname (const char *name)
int gethostbyname_r (const char *name, struct hostent *result_buf,
char *buf, size_t buflen, struct hostent **result,
int *h_errnop)
The actual prototype of the function in the NSS modules in this case is
enum nss_status _nss_files_gethostbyname_r (const char *name,
struct hostent *result_buf,
char *buf, size_t buflen,
int *errnop, int *h_errnop)
I.e., the interface function is in fact the reentrant function with
the change of the return value and the omission of the RESULT
parameter. While the user-level function returns a pointer to the
result the reentrant function return an `enum nss_status' value:
`NSS_STATUS_TRYAGAIN'
numeric value `-2'
`NSS_STATUS_UNAVAIL'
numeric value `-1'
`NSS_STATUS_NOTFOUND'
numeric value `0'
`NSS_STATUS_SUCCESS'
numeric value `1'
Now you see where the action items of the `/etc/nsswitch.conf' file are
used.
If you study the source code you will find there is a fifth value:
`NSS_STATUS_RETURN'. This is an internal use only value, used by a few
functions in places where none of the above value can be used. If
necessary the source code should be examined to learn about the details.
In case the interface function has to return an error it is important
that the correct error code is stored in `*ERRNOP'. Some return status
value have only one associated error code, others have more.
`NSS_STATUS_TRYAGAIN' `EAGAIN' One of the functions used ran
temporarily out of resources or a
service is currently not available.
`ERANGE' The provided buffer is not large
enough. The function should be
called again with a larger buffer.
`NSS_STATUS_UNAVAIL' `ENOENT' A necessary input file cannot be
found.
`NSS_STATUS_NOTFOUND' `ENOENT' The requested entry is not
available.
These are proposed values. There can be other error codes and the
described error codes can have different meaning. *With one
exception:* when returning `NSS_STATUS_TRYAGAIN' the error code
`ERANGE' _must_ mean that the user provided buffer is too small.
Everything is non-critical.
The above function has something special which is missing for almost
all the other module functions. There is an argument H_ERRNOP. This
points to a variable which will be filled with the error code in case
the execution of the function fails for some reason. The reentrant
function cannot use the global variable H_ERRNO; `gethostbyname' calls
`gethostbyname_r' with the last argument set to `&h_errno'.
The `getXXXbyYYY' functions are the most important functions in the
NSS modules. But there are others which implement the other ways to
access system databases (say for the password database, there are
`setpwent', `getpwent', and `endpwent'). These will be described in
more detail later. Here we give a general way to determine the
signature of the module function:
* the return value is `int';
* the name is as explained in *note NSS Module Names::;
* the first arguments are identical to the arguments of the
non-reentrant function;
* the next three arguments are:
`STRUCT_TYPE *result_buf'
pointer to buffer where the result is stored. `STRUCT_TYPE'
is normally a struct which corresponds to the database.
`char *buffer'
pointer to a buffer where the function can store additional
data for the result etc.
`size_t buflen'
length of the buffer pointed to by BUFFER.
* possibly a last argument H_ERRNOP, for the host name and network
name lookup functions.
This table is correct for all functions but the `set...ent' and
`end...ent' functions.

File: libc.info, Node: Extending NSS, Prev: NSS Module Internals, Up: Name Service Switch
28.4 Extending NSS
==================
One of the advantages of NSS mentioned above is that it can be extended
quite easily. There are two ways in which the extension can happen:
adding another database or adding another service. The former is
normally done only by the C library developers. It is here only
important to remember that adding another database is independent from
adding another service because a service need not support all databases
or lookup functions.
A designer/implementor of a new service is therefore free to choose
the databases s/he is interested in and leave the rest for later (or
completely aside).
* Menu:
* Adding another Service to NSS:: What is to do to add a new service.
* NSS Module Function Internals:: Guidelines for writing new NSS
service functions.

File: libc.info, Node: Adding another Service to NSS, Next: NSS Module Function Internals, Prev: Extending NSS, Up: Extending NSS
28.4.1 Adding another Service to NSS
------------------------------------
The sources for a new service need not (and should not) be part of the
GNU C Library itself. The developer retains complete control over the
sources and its development. The links between the C library and the
new service module consists solely of the interface functions.
Each module is designed following a specific interface specification.
For now the version is 2 (the interface in version 1 was not adequate)
and this manifests in the version number of the shared library object of
the NSS modules: they have the extension `.2'. If the interface
changes again in an incompatible way, this number will be increased.
Modules using the old interface will still be usable.
Developers of a new service will have to make sure that their module
is created using the correct interface number. This means the file
itself must have the correct name and on ELF systems the "soname"
(Shared Object Name) must also have this number. Building a module
from a bunch of object files on an ELF system using GNU CC could be
done like this:
gcc -shared -o libnss_NAME.so.2 -Wl,-soname,libnss_NAME.so.2 OBJECTS
*note Options for Linking: (gcc)Link Options, to learn more about this
command line.
To use the new module the library must be able to find it. This can
be achieved by using options for the dynamic linker so that it will
search the directory where the binary is placed. For an ELF system
this could be done by adding the wanted directory to the value of
`LD_LIBRARY_PATH'.
But this is not always possible since some programs (those which run
under IDs which do not belong to the user) ignore this variable.
Therefore the stable version of the module should be placed into a
directory which is searched by the dynamic linker. Normally this should
be the directory `$prefix/lib', where `$prefix' corresponds to the
value given to configure using the `--prefix' option. But be careful:
this should only be done if it is clear the module does not cause any
harm. System administrators should be careful.

File: libc.info, Node: NSS Module Function Internals, Prev: Adding another Service to NSS, Up: Extending NSS
28.4.2 Internals of the NSS Module Functions
--------------------------------------------
Until now we only provided the syntactic interface for the functions in
the NSS module. In fact there is not much more we can say since the
implementation obviously is different for each function. But a few
general rules must be followed by all functions.
In fact there are four kinds of different functions which may appear
in the interface. All derive from the traditional ones for system
databases. DB in the following table is normally an abbreviation for
the database (e.g., it is `pw' for the password database).
`enum nss_status _nss_DATABASE_setDBent (void)'
This function prepares the service for following operations. For a
simple file based lookup this means files could be opened, for
other services this function simply is a noop.
One special case for this function is that it takes an additional
argument for some DATABASEs (i.e., the interface is `int setDBent
(int)'). *note Host Names::, which describes the `sethostent'
function.
The return value should be NSS_STATUS_SUCCESS or according to the
table above in case of an error (*note NSS Modules Interface::).
`enum nss_status _nss_DATABASE_endDBent (void)'
This function simply closes all files which are still open or
removes buffer caches. If there are no files or buffers to remove
this is again a simple noop.
There normally is no return value different to NSS_STATUS_SUCCESS.
`enum nss_status _nss_DATABASE_getDBent_r (STRUCTURE *result, char *buffer, size_t buflen, int *errnop)'
Since this function will be called several times in a row to
retrieve one entry after the other it must keep some kind of
state. But this also means the functions are not really
reentrant. They are reentrant only in that simultaneous calls to
this function will not try to write the retrieved data in the same
place (as it would be the case for the non-reentrant functions);
instead, it writes to the structure pointed to by the RESULT
parameter. But the calls share a common state and in the case of
a file access this means they return neighboring entries in the
file.
The buffer of length BUFLEN pointed to by BUFFER can be used for
storing some additional data for the result. It is _not_
guaranteed that the same buffer will be passed for the next call
of this function. Therefore one must not misuse this buffer to
save some state information from one call to another.
Before the function returns the implementation should store the
value of the local ERRNO variable in the variable pointed to be
ERRNOP. This is important to guarantee the module working in
statically linked programs.
As explained above this function could also have an additional last
argument. This depends on the database used; it happens only for
`host' and `networks'.
The function shall return `NSS_STATUS_SUCCESS' as long as there are
more entries. When the last entry was read it should return
`NSS_STATUS_NOTFOUND'. When the buffer given as an argument is too
small for the data to be returned `NSS_STATUS_TRYAGAIN' should be
returned. When the service was not formerly initialized by a call
to `_nss_DATABASE_setDBent' all return value allowed for this
function can also be returned here.
`enum nss_status _nss_DATABASE_getDBbyXX_r (PARAMS, STRUCTURE *result, char *buffer, size_t buflen, int *errnop)'
This function shall return the entry from the database which is
addressed by the PARAMS. The type and number of these arguments
vary. It must be individually determined by looking to the
user-level interface functions. All arguments given to the
non-reentrant version are here described by PARAMS.
The result must be stored in the structure pointed to by RESULT.
If there is additional data to return (say strings, where the
RESULT structure only contains pointers) the function must use the
BUFFER or length BUFLEN. There must not be any references to
non-constant global data.
The implementation of this function should honor the STAYOPEN flag
set by the `setDBent' function whenever this makes sense.
Before the function returns the implementation should store the
value of the local ERRNO variable in the variable pointed to be
ERRNOP. This is important to guarantee the module working in
statically linked programs.
Again, this function takes an additional last argument for the
`host' and `networks' database.
The return value should as always follow the rules given above
(*note NSS Modules Interface::).

File: libc.info, Node: Users and Groups, Next: System Management, Prev: Name Service Switch, Up: Top
29 Users and Groups
*******************
Every user who can log in on the system is identified by a unique number
called the "user ID". Each process has an effective user ID which says
which user's access permissions it has.
Users are classified into "groups" for access control purposes. Each
process has one or more "group ID values" which say which groups the
process can use for access to files.
The effective user and group IDs of a process collectively form its
"persona". This determines which files the process can access.
Normally, a process inherits its persona from the parent process, but
under special circumstances a process can change its persona and thus
change its access permissions.
Each file in the system also has a user ID and a group ID. Access
control works by comparing the user and group IDs of the file with those
of the running process.
The system keeps a database of all the registered users, and another
database of all the defined groups. There are library functions you
can use to examine these databases.
* Menu:
* User and Group IDs:: Each user has a unique numeric ID;
likewise for groups.
* Process Persona:: The user IDs and group IDs of a process.
* Why Change Persona:: Why a program might need to change
its user and/or group IDs.
* How Change Persona:: Changing the user and group IDs.
* Reading Persona:: How to examine the user and group IDs.
* Setting User ID:: Functions for setting the user ID.
* Setting Groups:: Functions for setting the group IDs.
* Enable/Disable Setuid:: Turning setuid access on and off.
* Setuid Program Example:: The pertinent parts of one sample program.
* Tips for Setuid:: How to avoid granting unlimited access.
* Who Logged In:: Getting the name of the user who logged in,
or of the real user ID of the current process.
* User Accounting Database:: Keeping information about users and various
actions in databases.
* User Database:: Functions and data structures for
accessing the user database.
* Group Database:: Functions and data structures for
accessing the group database.
* Database Example:: Example program showing the use of database
inquiry functions.
* Netgroup Database:: Functions for accessing the netgroup database.

File: libc.info, Node: User and Group IDs, Next: Process Persona, Up: Users and Groups
29.1 User and Group IDs
=======================
Each user account on a computer system is identified by a "user name"
(or "login name") and "user ID". Normally, each user name has a unique
user ID, but it is possible for several login names to have the same
user ID. The user names and corresponding user IDs are stored in a
data base which you can access as described in *note User Database::.
Users are classified in "groups". Each user name belongs to one
"default group" and may also belong to any number of "supplementary
groups". Users who are members of the same group can share resources
(such as files) that are not accessible to users who are not a member
of that group. Each group has a "group name" and "group ID". *Note
Group Database::, for how to find information about a group ID or group
name.

File: libc.info, Node: Process Persona, Next: Why Change Persona, Prev: User and Group IDs, Up: Users and Groups
29.2 The Persona of a Process
=============================
At any time, each process has an "effective user ID", a "effective
group ID", and a set of "supplementary group IDs". These IDs determine
the privileges of the process. They are collectively called the
"persona" of the process, because they determine "who it is" for
purposes of access control.
Your login shell starts out with a persona which consists of your
user ID, your default group ID, and your supplementary group IDs (if
you are in more than one group). In normal circumstances, all your
other processes inherit these values.
A process also has a "real user ID" which identifies the user who
created the process, and a "real group ID" which identifies that user's
default group. These values do not play a role in access control, so
we do not consider them part of the persona. But they are also
important.
Both the real and effective user ID can be changed during the
lifetime of a process. *Note Why Change Persona::.
For details on how a process's effective user ID and group IDs affect
its permission to access files, see *note Access Permission::.
The effective user ID of a process also controls permissions for
sending signals using the `kill' function. *Note Signaling Another
Process::.
Finally, there are many operations which can only be performed by a
process whose effective user ID is zero. A process with this user ID is
a "privileged process". Commonly the user name `root' is associated
with user ID 0, but there may be other user names with this ID.

File: libc.info, Node: Why Change Persona, Next: How Change Persona, Prev: Process Persona, Up: Users and Groups
29.3 Why Change the Persona of a Process?
=========================================
The most obvious situation where it is necessary for a process to change
its user and/or group IDs is the `login' program. When `login' starts
running, its user ID is `root'. Its job is to start a shell whose user
and group IDs are those of the user who is logging in. (To accomplish
this fully, `login' must set the real user and group IDs as well as its
persona. But this is a special case.)
The more common case of changing persona is when an ordinary user
program needs access to a resource that wouldn't ordinarily be
accessible to the user actually running it.
For example, you may have a file that is controlled by your program
but that shouldn't be read or modified directly by other users, either
because it implements some kind of locking protocol, or because you want
to preserve the integrity or privacy of the information it contains.
This kind of restricted access can be implemented by having the program
change its effective user or group ID to match that of the resource.
Thus, imagine a game program that saves scores in a file. The game
program itself needs to be able to update this file no matter who is
running it, but if users can write the file without going through the
game, they can give themselves any scores they like. Some people
consider this undesirable, or even reprehensible. It can be prevented
by creating a new user ID and login name (say, `games') to own the
scores file, and make the file writable only by this user. Then, when
the game program wants to update this file, it can change its effective
user ID to be that for `games'. In effect, the program must adopt the
persona of `games' so it can write the scores file.

File: libc.info, Node: How Change Persona, Next: Reading Persona, Prev: Why Change Persona, Up: Users and Groups
29.4 How an Application Can Change Persona
==========================================
The ability to change the persona of a process can be a source of
unintentional privacy violations, or even intentional abuse. Because of
the potential for problems, changing persona is restricted to special
circumstances.
You can't arbitrarily set your user ID or group ID to anything you
want; only privileged processes can do that. Instead, the normal way
for a program to change its persona is that it has been set up in
advance to change to a particular user or group. This is the function
of the setuid and setgid bits of a file's access mode. *Note
Permission Bits::.
When the setuid bit of an executable file is on, executing that file
gives the process a third user ID: the "file user ID". This ID is set
to the owner ID of the file. The system then changes the effective
user ID to the file user ID. The real user ID remains as it was.
Likewise, if the setgid bit is on, the process is given a "file group
ID" equal to the group ID of the file, and its effective group ID is
changed to the file group ID.
If a process has a file ID (user or group), then it can at any time
change its effective ID to its real ID and back to its file ID.
Programs use this feature to relinquish their special privileges except
when they actually need them. This makes it less likely that they can
be tricked into doing something inappropriate with their privileges.
*Portability Note:* Older systems do not have file IDs. To
determine if a system has this feature, you can test the compiler
define `_POSIX_SAVED_IDS'. (In the POSIX standard, file IDs are known
as saved IDs.)
*Note File Attributes::, for a more general discussion of file modes
and accessibility.

File: libc.info, Node: Reading Persona, Next: Setting User ID, Prev: How Change Persona, Up: Users and Groups
29.5 Reading the Persona of a Process
=====================================
Here are detailed descriptions of the functions for reading the user and
group IDs of a process, both real and effective. To use these
facilities, you must include the header files `sys/types.h' and
`unistd.h'.
-- Data Type: uid_t
This is an integer data type used to represent user IDs. In the
GNU C Library, this is an alias for `unsigned int'.
-- Data Type: gid_t
This is an integer data type used to represent group IDs. In the
GNU C Library, this is an alias for `unsigned int'.
-- Function: uid_t getuid (void)
The `getuid' function returns the real user ID of the process.
-- Function: gid_t getgid (void)
The `getgid' function returns the real group ID of the process.
-- Function: uid_t geteuid (void)
The `geteuid' function returns the effective user ID of the
process.
-- Function: gid_t getegid (void)
The `getegid' function returns the effective group ID of the
process.
-- Function: int getgroups (int COUNT, gid_t *GROUPS)
The `getgroups' function is used to inquire about the supplementary
group IDs of the process. Up to COUNT of these group IDs are
stored in the array GROUPS; the return value from the function is
the number of group IDs actually stored. If COUNT is smaller than
the total number of supplementary group IDs, then `getgroups'
returns a value of `-1' and `errno' is set to `EINVAL'.
If COUNT is zero, then `getgroups' just returns the total number
of supplementary group IDs. On systems that do not support
supplementary groups, this will always be zero.
Here's how to use `getgroups' to read all the supplementary group
IDs:
gid_t *
read_all_groups (void)
{
int ngroups = getgroups (0, NULL);
gid_t *groups
= (gid_t *) xmalloc (ngroups * sizeof (gid_t));
int val = getgroups (ngroups, groups);
if (val < 0)
{
free (groups);
return NULL;
}
return groups;
}

File: libc.info, Node: Setting User ID, Next: Setting Groups, Prev: Reading Persona, Up: Users and Groups
29.6 Setting the User ID
========================
This section describes the functions for altering the user ID (real
and/or effective) of a process. To use these facilities, you must
include the header files `sys/types.h' and `unistd.h'.
-- Function: int seteuid (uid_t NEWEUID)
This function sets the effective user ID of a process to NEWEUID,
provided that the process is allowed to change its effective user
ID. A privileged process (effective user ID zero) can change its
effective user ID to any legal value. An unprivileged process
with a file user ID can change its effective user ID to its real
user ID or to its file user ID. Otherwise, a process may not
change its effective user ID at all.
The `seteuid' function returns a value of `0' to indicate
successful completion, and a value of `-1' to indicate an error.
The following `errno' error conditions are defined for this
function:
`EINVAL'
The value of the NEWEUID argument is invalid.
`EPERM'
The process may not change to the specified ID.
Older systems (those without the `_POSIX_SAVED_IDS' feature) do not
have this function.
-- Function: int setuid (uid_t NEWUID)
If the calling process is privileged, this function sets both the
real and effective user ID of the process to NEWUID. It also
deletes the file user ID of the process, if any. NEWUID may be any
legal value. (Once this has been done, there is no way to recover
the old effective user ID.)
If the process is not privileged, and the system supports the
`_POSIX_SAVED_IDS' feature, then this function behaves like
`seteuid'.
The return values and error conditions are the same as for
`seteuid'.
-- Function: int setreuid (uid_t RUID, uid_t EUID)
This function sets the real user ID of the process to RUID and the
effective user ID to EUID. If RUID is `-1', it means not to
change the real user ID; likewise if EUID is `-1', it means not to
change the effective user ID.
The `setreuid' function exists for compatibility with 4.3 BSD Unix,
which does not support file IDs. You can use this function to
swap the effective and real user IDs of the process. (Privileged
processes are not limited to this particular usage.) If file IDs
are supported, you should use that feature instead of this
function. *Note Enable/Disable Setuid::.
The return value is `0' on success and `-1' on failure. The
following `errno' error conditions are defined for this function:
`EPERM'
The process does not have the appropriate privileges; you do
not have permission to change to the specified ID.

File: libc.info, Node: Setting Groups, Next: Enable/Disable Setuid, Prev: Setting User ID, Up: Users and Groups
29.7 Setting the Group IDs
==========================
This section describes the functions for altering the group IDs (real
and effective) of a process. To use these facilities, you must include
the header files `sys/types.h' and `unistd.h'.
-- Function: int setegid (gid_t NEWGID)
This function sets the effective group ID of the process to
NEWGID, provided that the process is allowed to change its group
ID. Just as with `seteuid', if the process is privileged it may
change its effective group ID to any value; if it isn't, but it
has a file group ID, then it may change to its real group ID or
file group ID; otherwise it may not change its effective group ID.
Note that a process is only privileged if its effective _user_ ID
is zero. The effective group ID only affects access permissions.
The return values and error conditions for `setegid' are the same
as those for `seteuid'.
This function is only present if `_POSIX_SAVED_IDS' is defined.
-- Function: int setgid (gid_t NEWGID)
This function sets both the real and effective group ID of the
process to NEWGID, provided that the process is privileged. It
also deletes the file group ID, if any.
If the process is not privileged, then `setgid' behaves like
`setegid'.
The return values and error conditions for `setgid' are the same
as those for `seteuid'.
-- Function: int setregid (gid_t RGID, gid_t EGID)
This function sets the real group ID of the process to RGID and
the effective group ID to EGID. If RGID is `-1', it means not to
change the real group ID; likewise if EGID is `-1', it means not
to change the effective group ID.
The `setregid' function is provided for compatibility with 4.3 BSD
Unix, which does not support file IDs. You can use this function
to swap the effective and real group IDs of the process.
(Privileged processes are not limited to this usage.) If file IDs
are supported, you should use that feature instead of using this
function. *Note Enable/Disable Setuid::.
The return values and error conditions for `setregid' are the same
as those for `setreuid'.
`setuid' and `setgid' behave differently depending on whether the
effective user ID at the time is zero. If it is not zero, they behave
like `seteuid' and `setegid'. If it is, they change both effective and
real IDs and delete the file ID. To avoid confusion, we recommend you
always use `seteuid' and `setegid' except when you know the effective
user ID is zero and your intent is to change the persona permanently.
This case is rare--most of the programs that need it, such as `login'
and `su', have already been written.
Note that if your program is setuid to some user other than `root',
there is no way to drop privileges permanently.
The system also lets privileged processes change their supplementary
group IDs. To use `setgroups' or `initgroups', your programs should
include the header file `grp.h'.
-- Function: int setgroups (size_t COUNT, const gid_t *GROUPS)
This function sets the process's supplementary group IDs. It can
only be called from privileged processes. The COUNT argument
specifies the number of group IDs in the array GROUPS.
This function returns `0' if successful and `-1' on error. The
following `errno' error conditions are defined for this function:
`EPERM'
The calling process is not privileged.
-- Function: int initgroups (const char *USER, gid_t GROUP)
The `initgroups' function sets the process's supplementary group
IDs to be the normal default for the user name USER. The group
GROUP is automatically included.
This function works by scanning the group database for all the
groups USER belongs to. It then calls `setgroups' with the list it
has constructed.
The return values and error conditions are the same as for
`setgroups'.
If you are interested in the groups a particular user belongs to,
but do not want to change the process's supplementary group IDs, you
can use `getgrouplist'. To use `getgrouplist', your programs should
include the header file `grp.h'.
-- Function: int getgrouplist (const char *USER, gid_t GROUP, gid_t
*GROUPS, int *NGROUPS)
The `getgrouplist' function scans the group database for all the
groups USER belongs to. Up to *NGROUPS group IDs corresponding to
these groups are stored in the array GROUPS; the return value from
the function is the number of group IDs actually stored. If
*NGROUPS is smaller than the total number of groups found, then
`getgrouplist' returns a value of `-1' and stores the actual
number of groups in *NGROUPS. The group GROUP is automatically
included in the list of groups returned by `getgrouplist'.
Here's how to use `getgrouplist' to read all supplementary groups
for USER:
gid_t *
supplementary_groups (char *user)
{
int ngroups = 16;
gid_t *groups
= (gid_t *) xmalloc (ngroups * sizeof (gid_t));
struct passwd *pw = getpwnam (user);
if (pw == NULL)
return NULL;
if (getgrouplist (pw->pw_name, pw->pw_gid, groups, &ngroups) < 0)
{
groups = xrealloc (ngroups * sizeof (gid_t));
getgrouplist (pw->pw_name, pw->pw_gid, groups, &ngroups);
}
return groups;
}

File: libc.info, Node: Enable/Disable Setuid, Next: Setuid Program Example, Prev: Setting Groups, Up: Users and Groups
29.8 Enabling and Disabling Setuid Access
=========================================
A typical setuid program does not need its special access all of the
time. It's a good idea to turn off this access when it isn't needed,
so it can't possibly give unintended access.
If the system supports the `_POSIX_SAVED_IDS' feature, you can
accomplish this with `seteuid'. When the game program starts, its real
user ID is `jdoe', its effective user ID is `games', and its saved user
ID is also `games'. The program should record both user ID values once
at the beginning, like this:
user_user_id = getuid ();
game_user_id = geteuid ();
Then it can turn off game file access with
seteuid (user_user_id);
and turn it on with
seteuid (game_user_id);
Throughout this process, the real user ID remains `jdoe' and the file
user ID remains `games', so the program can always set its effective
user ID to either one.
On other systems that don't support file user IDs, you can turn
setuid access on and off by using `setreuid' to swap the real and
effective user IDs of the process, as follows:
setreuid (geteuid (), getuid ());
This special case is always allowed--it cannot fail.
Why does this have the effect of toggling the setuid access?
Suppose a game program has just started, and its real user ID is `jdoe'
while its effective user ID is `games'. In this state, the game can
write the scores file. If it swaps the two uids, the real becomes
`games' and the effective becomes `jdoe'; now the program has only
`jdoe' access. Another swap brings `games' back to the effective user
ID and restores access to the scores file.
In order to handle both kinds of systems, test for the saved user ID
feature with a preprocessor conditional, like this:
#ifdef _POSIX_SAVED_IDS
seteuid (user_user_id);
#else
setreuid (geteuid (), getuid ());
#endif

File: libc.info, Node: Setuid Program Example, Next: Tips for Setuid, Prev: Enable/Disable Setuid, Up: Users and Groups
29.9 Setuid Program Example
===========================
Here's an example showing how to set up a program that changes its
effective user ID.
This is part of a game program called `caber-toss' that manipulates
a file `scores' that should be writable only by the game program
itself. The program assumes that its executable file will be installed
with the setuid bit set and owned by the same user as the `scores'
file. Typically, a system administrator will set up an account like
`games' for this purpose.
The executable file is given mode `4755', so that doing an `ls -l'
on it produces output like:
-rwsr-xr-x 1 games 184422 Jul 30 15:17 caber-toss
The setuid bit shows up in the file modes as the `s'.
The scores file is given mode `644', and doing an `ls -l' on it
shows:
-rw-r--r-- 1 games 0 Jul 31 15:33 scores
Here are the parts of the program that show how to set up the changed
user ID. This program is conditionalized so that it makes use of the
file IDs feature if it is supported, and otherwise uses `setreuid' to
swap the effective and real user IDs.
#include <stdio.h>
#include <sys/types.h>
#include <unistd.h>
#include <stdlib.h>
/* Remember the effective and real UIDs. */
static uid_t euid, ruid;
/* Restore the effective UID to its original value. */
void
do_setuid (void)
{
int status;
#ifdef _POSIX_SAVED_IDS
status = seteuid (euid);
#else
status = setreuid (ruid, euid);
#endif
if (status < 0) {
fprintf (stderr, "Couldn't set uid.\n");
exit (status);
}
}
/* Set the effective UID to the real UID. */
void
undo_setuid (void)
{
int status;
#ifdef _POSIX_SAVED_IDS
status = seteuid (ruid);
#else
status = setreuid (euid, ruid);
#endif
if (status < 0) {
fprintf (stderr, "Couldn't set uid.\n");
exit (status);
}
}
/* Main program. */
int
main (void)
{
/* Remember the real and effective user IDs. */
ruid = getuid ();
euid = geteuid ();
undo_setuid ();
/* Do the game and record the score. */
...
}
Notice how the first thing the `main' function does is to set the
effective user ID back to the real user ID. This is so that any other
file accesses that are performed while the user is playing the game use
the real user ID for determining permissions. Only when the program
needs to open the scores file does it switch back to the file user ID,
like this:
/* Record the score. */
int
record_score (int score)
{
FILE *stream;
char *myname;
/* Open the scores file. */
do_setuid ();
stream = fopen (SCORES_FILE, "a");
undo_setuid ();
/* Write the score to the file. */
if (stream)
{
myname = cuserid (NULL);
if (score < 0)
fprintf (stream, "%10s: Couldn't lift the caber.\n", myname);
else
fprintf (stream, "%10s: %d feet.\n", myname, score);
fclose (stream);
return 0;
}
else
return -1;
}

File: libc.info, Node: Tips for Setuid, Next: Who Logged In, Prev: Setuid Program Example, Up: Users and Groups
29.10 Tips for Writing Setuid Programs
======================================
It is easy for setuid programs to give the user access that isn't
intended--in fact, if you want to avoid this, you need to be careful.
Here are some guidelines for preventing unintended access and
minimizing its consequences when it does occur:
* Don't have `setuid' programs with privileged user IDs such as
`root' unless it is absolutely necessary. If the resource is
specific to your particular program, it's better to define a new,
nonprivileged user ID or group ID just to manage that resource.
It's better if you can write your program to use a special group
than a special user.
* Be cautious about using the `exec' functions in combination with
changing the effective user ID. Don't let users of your program
execute arbitrary programs under a changed user ID. Executing a
shell is especially bad news. Less obviously, the `execlp' and
`execvp' functions are a potential risk (since the program they
execute depends on the user's `PATH' environment variable).
If you must `exec' another program under a changed ID, specify an
absolute file name (*note File Name Resolution::) for the
executable, and make sure that the protections on that executable
and _all_ containing directories are such that ordinary users
cannot replace it with some other program.
You should also check the arguments passed to the program to make
sure they do not have unexpected effects. Likewise, you should
examine the environment variables. Decide which arguments and
variables are safe, and reject all others.
You should never use `system' in a privileged program, because it
invokes a shell.
* Only use the user ID controlling the resource in the part of the
program that actually uses that resource. When you're finished
with it, restore the effective user ID back to the actual user's
user ID. *Note Enable/Disable Setuid::.
* If the `setuid' part of your program needs to access other files
besides the controlled resource, it should verify that the real
user would ordinarily have permission to access those files. You
can use the `access' function (*note Access Permission::) to check
this; it uses the real user and group IDs, rather than the
effective IDs.

File: libc.info, Node: Who Logged In, Next: User Accounting Database, Prev: Tips for Setuid, Up: Users and Groups
29.11 Identifying Who Logged In
===============================
You can use the functions listed in this section to determine the login
name of the user who is running a process, and the name of the user who
logged in the current session. See also the function `getuid' and
friends (*note Reading Persona::). How this information is collected by
the system and how to control/add/remove information from the background
storage is described in *note User Accounting Database::.
The `getlogin' function is declared in `unistd.h', while `cuserid'
and `L_cuserid' are declared in `stdio.h'.
-- Function: char * getlogin (void)
The `getlogin' function returns a pointer to a string containing
the name of the user logged in on the controlling terminal of the
process, or a null pointer if this information cannot be
determined. The string is statically allocated and might be
overwritten on subsequent calls to this function or to `cuserid'.
-- Function: char * cuserid (char *STRING)
The `cuserid' function returns a pointer to a string containing a
user name associated with the effective ID of the process. If
STRING is not a null pointer, it should be an array that can hold
at least `L_cuserid' characters; the string is returned in this
array. Otherwise, a pointer to a string in a static area is
returned. This string is statically allocated and might be
overwritten on subsequent calls to this function or to `getlogin'.
The use of this function is deprecated since it is marked to be
withdrawn in XPG4.2 and has already been removed from newer
revisions of POSIX.1.
-- Macro: int L_cuserid
An integer constant that indicates how long an array you might
need to store a user name.
These functions let your program identify positively the user who is
running or the user who logged in this session. (These can differ when
setuid programs are involved; see *note Process Persona::.) The user
cannot do anything to fool these functions.
For most purposes, it is more useful to use the environment variable
`LOGNAME' to find out who the user is. This is more flexible precisely
because the user can set `LOGNAME' arbitrarily. *Note Standard
Environment::.

File: libc.info, Node: User Accounting Database, Next: User Database, Prev: Who Logged In, Up: Users and Groups
29.12 The User Accounting Database
==================================
Most Unix-like operating systems keep track of logged in users by
maintaining a user accounting database. This user accounting database
stores for each terminal, who has logged on, at what time, the process
ID of the user's login shell, etc., etc., but also stores information
about the run level of the system, the time of the last system reboot,
and possibly more.
The user accounting database typically lives in `/etc/utmp',
`/var/adm/utmp' or `/var/run/utmp'. However, these files should
*never* be accessed directly. For reading information from and writing
information to the user accounting database, the functions described in
this section should be used.
* Menu:
* Manipulating the Database:: Scanning and modifying the user
accounting database.
* XPG Functions:: A standardized way for doing the same thing.
* Logging In and Out:: Functions from BSD that modify the user
accounting database.

File: libc.info, Node: Manipulating the Database, Next: XPG Functions, Up: User Accounting Database
29.12.1 Manipulating the User Accounting Database
-------------------------------------------------
These functions and the corresponding data structures are declared in
the header file `utmp.h'.
-- Data Type: struct exit_status
The `exit_status' data structure is used to hold information about
the exit status of processes marked as `DEAD_PROCESS' in the user
accounting database.
`short int e_termination'
The exit status of the process.
`short int e_exit'
The exit status of the process.
-- Data Type: struct utmp
The `utmp' data structure is used to hold information about entries
in the user accounting database. On GNU systems it has the
following members:
`short int ut_type'
Specifies the type of login; one of `EMPTY', `RUN_LVL',
`BOOT_TIME', `OLD_TIME', `NEW_TIME', `INIT_PROCESS',
`LOGIN_PROCESS', `USER_PROCESS', `DEAD_PROCESS' or
`ACCOUNTING'.
`pid_t ut_pid'
The process ID number of the login process.
`char ut_line[]'
The device name of the tty (without `/dev/').
`char ut_id[]'
The inittab ID of the process.
`char ut_user[]'
The user's login name.
`char ut_host[]'
The name of the host from which the user logged in.
`struct exit_status ut_exit'
The exit status of a process marked as `DEAD_PROCESS'.
`long ut_session'
The Session ID, used for windowing.
`struct timeval ut_tv'
Time the entry was made. For entries of type `OLD_TIME' this
is the time when the system clock changed, and for entries of
type `NEW_TIME' this is the time the system clock was set to.
`int32_t ut_addr_v6[4]'
The Internet address of a remote host.
The `ut_type', `ut_pid', `ut_id', `ut_tv', and `ut_host' fields are
not available on all systems. Portable applications therefore should
be prepared for these situations. To help doing this the `utmp.h'
header provides macros `_HAVE_UT_TYPE', `_HAVE_UT_PID', `_HAVE_UT_ID',
`_HAVE_UT_TV', and `_HAVE_UT_HOST' if the respective field is
available. The programmer can handle the situations by using `#ifdef'
in the program code.
The following macros are defined for use as values for the `ut_type'
member of the `utmp' structure. The values are integer constants.
`EMPTY'
This macro is used to indicate that the entry contains no valid
user accounting information.
`RUN_LVL'
This macro is used to identify the systems runlevel.
`BOOT_TIME'
This macro is used to identify the time of system boot.
`OLD_TIME'
This macro is used to identify the time when the system clock
changed.
`NEW_TIME'
This macro is used to identify the time after the system changed.
`INIT_PROCESS'
This macro is used to identify a process spawned by the init
process.
`LOGIN_PROCESS'
This macro is used to identify the session leader of a logged in
user.
`USER_PROCESS'
This macro is used to identify a user process.
`DEAD_PROCESS'
This macro is used to identify a terminated process.
`ACCOUNTING'
???
The size of the `ut_line', `ut_id', `ut_user' and `ut_host' arrays
can be found using the `sizeof' operator.
Many older systems have, instead of an `ut_tv' member, an `ut_time'
member, usually of type `time_t', for representing the time associated
with the entry. Therefore, for backwards compatibility only, `utmp.h'
defines `ut_time' as an alias for `ut_tv.tv_sec'.
-- Function: void setutent (void)
This function opens the user accounting database to begin scanning
it. You can then call `getutent', `getutid' or `getutline' to
read entries and `pututline' to write entries.
If the database is already open, it resets the input to the
beginning of the database.
-- Function: struct utmp * getutent (void)
The `getutent' function reads the next entry from the user
accounting database. It returns a pointer to the entry, which is
statically allocated and may be overwritten by subsequent calls to
`getutent'. You must copy the contents of the structure if you
wish to save the information or you can use the `getutent_r'
function which stores the data in a user-provided buffer.
A null pointer is returned in case no further entry is available.
-- Function: void endutent (void)
This function closes the user accounting database.
-- Function: struct utmp * getutid (const struct utmp *ID)
This function searches forward from the current point in the
database for an entry that matches ID. If the `ut_type' member of
the ID structure is one of `RUN_LVL', `BOOT_TIME', `OLD_TIME' or
`NEW_TIME' the entries match if the `ut_type' members are
identical. If the `ut_type' member of the ID structure is
`INIT_PROCESS', `LOGIN_PROCESS', `USER_PROCESS' or `DEAD_PROCESS',
the entries match if the `ut_type' member of the entry read from
the database is one of these four, and the `ut_id' members match.
However if the `ut_id' member of either the ID structure or the
entry read from the database is empty it checks if the `ut_line'
members match instead. If a matching entry is found, `getutid'
returns a pointer to the entry, which is statically allocated, and
may be overwritten by a subsequent call to `getutent', `getutid'
or `getutline'. You must copy the contents of the structure if
you wish to save the information.
A null pointer is returned in case the end of the database is
reached without a match.
The `getutid' function may cache the last read entry. Therefore,
if you are using `getutid' to search for multiple occurrences, it
is necessary to zero out the static data after each call.
Otherwise `getutid' could just return a pointer to the same entry
over and over again.
-- Function: struct utmp * getutline (const struct utmp *LINE)
This function searches forward from the current point in the
database until it finds an entry whose `ut_type' value is
`LOGIN_PROCESS' or `USER_PROCESS', and whose `ut_line' member
matches the `ut_line' member of the LINE structure. If it finds
such an entry, it returns a pointer to the entry which is
statically allocated, and may be overwritten by a subsequent call
to `getutent', `getutid' or `getutline'. You must copy the
contents of the structure if you wish to save the information.
A null pointer is returned in case the end of the database is
reached without a match.
The `getutline' function may cache the last read entry. Therefore
if you are using `getutline' to search for multiple occurrences, it
is necessary to zero out the static data after each call.
Otherwise `getutline' could just return a pointer to the same
entry over and over again.
-- Function: struct utmp * pututline (const struct utmp *UTMP)
The `pututline' function inserts the entry `*UTMP' at the
appropriate place in the user accounting database. If it finds
that it is not already at the correct place in the database, it
uses `getutid' to search for the position to insert the entry,
however this will not modify the static structure returned by
`getutent', `getutid' and `getutline'. If this search fails, the
entry is appended to the database.
The `pututline' function returns a pointer to a copy of the entry
inserted in the user accounting database, or a null pointer if the
entry could not be added. The following `errno' error conditions
are defined for this function:
`EPERM'
The process does not have the appropriate privileges; you
cannot modify the user accounting database.
All the `get*' functions mentioned before store the information they
return in a static buffer. This can be a problem in multi-threaded
programs since the data returned for the request is overwritten by the
return value data in another thread. Therefore the GNU C Library
provides as extensions three more functions which return the data in a
user-provided buffer.
-- Function: int getutent_r (struct utmp *BUFFER, struct utmp **RESULT)
The `getutent_r' is equivalent to the `getutent' function. It
returns the next entry from the database. But instead of storing
the information in a static buffer it stores it in the buffer
pointed to by the parameter BUFFER.
If the call was successful, the function returns `0' and the
pointer variable pointed to by the parameter RESULT contains a
pointer to the buffer which contains the result (this is most
probably the same value as BUFFER). If something went wrong
during the execution of `getutent_r' the function returns `-1'.
This function is a GNU extension.
-- Function: int getutid_r (const struct utmp *ID, struct utmp
*BUFFER, struct utmp **RESULT)
This function retrieves just like `getutid' the next entry matching
the information stored in ID. But the result is stored in the
buffer pointed to by the parameter BUFFER.
If successful the function returns `0' and the pointer variable
pointed to by the parameter RESULT contains a pointer to the
buffer with the result (probably the same as RESULT. If not
successful the function return `-1'.
This function is a GNU extension.
-- Function: int getutline_r (const struct utmp *LINE, struct utmp
*BUFFER, struct utmp **RESULT)
This function retrieves just like `getutline' the next entry
matching the information stored in LINE. But the result is stored
in the buffer pointed to by the parameter BUFFER.
If successful the function returns `0' and the pointer variable
pointed to by the parameter RESULT contains a pointer to the
buffer with the result (probably the same as RESULT. If not
successful the function return `-1'.
This function is a GNU extension.
In addition to the user accounting database, most systems keep a
number of similar databases. For example most systems keep a log file
with all previous logins (usually in `/etc/wtmp' or `/var/log/wtmp').
For specifying which database to examine, the following function
should be used.
-- Function: int utmpname (const char *FILE)
The `utmpname' function changes the name of the database to be
examined to FILE, and closes any previously opened database. By
default `getutent', `getutid', `getutline' and `pututline' read
from and write to the user accounting database.
The following macros are defined for use as the FILE argument:
-- Macro: char * _PATH_UTMP
This macro is used to specify the user accounting database.
-- Macro: char * _PATH_WTMP
This macro is used to specify the user accounting log file.
The `utmpname' function returns a value of `0' if the new name was
successfully stored, and a value of `-1' to indicate an error.
Note that `utmpname' does not try to open the database, and that
therefore the return value does not say anything about whether the
database can be successfully opened.
Specially for maintaining log-like databases the GNU C Library
provides the following function:
-- Function: void updwtmp (const char *WTMP_FILE, const struct utmp
*UTMP)
The `updwtmp' function appends the entry *UTMP to the database
specified by WTMP_FILE. For possible values for the WTMP_FILE
argument see the `utmpname' function.
*Portability Note:* Although many operating systems provide a subset
of these functions, they are not standardized. There are often subtle
differences in the return types, and there are considerable differences
between the various definitions of `struct utmp'. When programming for
the GNU C Library, it is probably best to stick with the functions
described in this section. If however, you want your program to be
portable, consider using the XPG functions described in *note XPG
Functions::, or take a look at the BSD compatible functions in *note
Logging In and Out::.

File: libc.info, Node: XPG Functions, Next: Logging In and Out, Prev: Manipulating the Database, Up: User Accounting Database
29.12.2 XPG User Accounting Database Functions
----------------------------------------------
These functions, described in the X/Open Portability Guide, are declared
in the header file `utmpx.h'.
-- Data Type: struct utmpx
The `utmpx' data structure contains at least the following members:
`short int ut_type'
Specifies the type of login; one of `EMPTY', `RUN_LVL',
`BOOT_TIME', `OLD_TIME', `NEW_TIME', `INIT_PROCESS',
`LOGIN_PROCESS', `USER_PROCESS' or `DEAD_PROCESS'.
`pid_t ut_pid'
The process ID number of the login process.
`char ut_line[]'
The device name of the tty (without `/dev/').
`char ut_id[]'
The inittab ID of the process.
`char ut_user[]'
The user's login name.
`struct timeval ut_tv'
Time the entry was made. For entries of type `OLD_TIME' this
is the time when the system clock changed, and for entries of
type `NEW_TIME' this is the time the system clock was set to.
In the GNU C Library, `struct utmpx' is identical to `struct utmp'
except for the fact that including `utmpx.h' does not make visible
the declaration of `struct exit_status'.
The following macros are defined for use as values for the `ut_type'
member of the `utmpx' structure. The values are integer constants and
are, in the GNU C Library, identical to the definitions in `utmp.h'.
`EMPTY'
This macro is used to indicate that the entry contains no valid
user accounting information.
`RUN_LVL'
This macro is used to identify the systems runlevel.
`BOOT_TIME'
This macro is used to identify the time of system boot.
`OLD_TIME'
This macro is used to identify the time when the system clock
changed.
`NEW_TIME'
This macro is used to identify the time after the system changed.
`INIT_PROCESS'
This macro is used to identify a process spawned by the init
process.
`LOGIN_PROCESS'
This macro is used to identify the session leader of a logged in
user.
`USER_PROCESS'
This macro is used to identify a user process.
`DEAD_PROCESS'
This macro is used to identify a terminated process.
The size of the `ut_line', `ut_id' and `ut_user' arrays can be found
using the `sizeof' operator.
-- Function: void setutxent (void)
This function is similar to `setutent'. In the GNU C Library it is
simply an alias for `setutent'.
-- Function: struct utmpx * getutxent (void)
The `getutxent' function is similar to `getutent', but returns a
pointer to a `struct utmpx' instead of `struct utmp'. In the GNU
C Library it simply is an alias for `getutent'.
-- Function: void endutxent (void)
This function is similar to `endutent'. In the GNU C Library it is
simply an alias for `endutent'.
-- Function: struct utmpx * getutxid (const struct utmpx *ID)
This function is similar to `getutid', but uses `struct utmpx'
instead of `struct utmp'. In the GNU C Library it is simply an
alias for `getutid'.
-- Function: struct utmpx * getutxline (const struct utmpx *LINE)
This function is similar to `getutid', but uses `struct utmpx'
instead of `struct utmp'. In the GNU C Library it is simply an
alias for `getutline'.
-- Function: struct utmpx * pututxline (const struct utmpx *UTMP)
The `pututxline' function is functionally identical to
`pututline', but uses `struct utmpx' instead of `struct utmp'. In
the GNU C Library, `pututxline' is simply an alias for `pututline'.
-- Function: int utmpxname (const char *FILE)
The `utmpxname' function is functionally identical to `utmpname'.
In the GNU C Library, `utmpxname' is simply an alias for
`utmpname'.
You can translate between a traditional `struct utmp' and an XPG
`struct utmpx' with the following functions. In the GNU C Library,
these functions are merely copies, since the two structures are
identical.
-- Function: int getutmp (const struct utmpx *UTMPX, struct utmp *UTMP)
`getutmp' copies the information, insofar as the structures are
compatible, from UTMPX to UTMP.
-- Function: int getutmpx (const struct utmp *UTMP, struct utmpx
*UTMPX)
`getutmpx' copies the information, insofar as the structures are
compatible, from UTMP to UTMPX.

File: libc.info, Node: Logging In and Out, Prev: XPG Functions, Up: User Accounting Database
29.12.3 Logging In and Out
--------------------------
These functions, derived from BSD, are available in the separate
`libutil' library, and declared in `utmp.h'.
Note that the `ut_user' member of `struct utmp' is called `ut_name'
in BSD. Therefore, `ut_name' is defined as an alias for `ut_user' in
`utmp.h'.
-- Function: int login_tty (int FILEDES)
This function makes FILEDES the controlling terminal of the
current process, redirects standard input, standard output and
standard error output to this terminal, and closes FILEDES.
This function returns `0' on successful completion, and `-1' on
error.
-- Function: void login (const struct utmp *ENTRY)
The `login' functions inserts an entry into the user accounting
database. The `ut_line' member is set to the name of the terminal
on standard input. If standard input is not a terminal `login'
uses standard output or standard error output to determine the
name of the terminal. If `struct utmp' has a `ut_type' member,
`login' sets it to `USER_PROCESS', and if there is an `ut_pid'
member, it will be set to the process ID of the current process.
The remaining entries are copied from ENTRY.
A copy of the entry is written to the user accounting log file.
-- Function: int logout (const char *UT_LINE)
This function modifies the user accounting database to indicate
that the user on UT_LINE has logged out.
The `logout' function returns `1' if the entry was successfully
written to the database, or `0' on error.
-- Function: void logwtmp (const char *UT_LINE, const char *UT_NAME,
const char *UT_HOST)
The `logwtmp' function appends an entry to the user accounting log
file, for the current time and the information provided in the
UT_LINE, UT_NAME and UT_HOST arguments.
*Portability Note:* The BSD `struct utmp' only has the `ut_line',
`ut_name', `ut_host' and `ut_time' members. Older systems do not even
have the `ut_host' member.

File: libc.info, Node: User Database, Next: Group Database, Prev: User Accounting Database, Up: Users and Groups
29.13 User Database
===================
This section describes how to search and scan the database of registered
users. The database itself is kept in the file `/etc/passwd' on most
systems, but on some systems a special network server gives access to
it.
* Menu:
* User Data Structure:: What each user record contains.
* Lookup User:: How to look for a particular user.
* Scanning All Users:: Scanning the list of all users, one by one.
* Writing a User Entry:: How a program can rewrite a user's record.

File: libc.info, Node: User Data Structure, Next: Lookup User, Up: User Database
29.13.1 The Data Structure that Describes a User
------------------------------------------------
The functions and data structures for accessing the system user database
are declared in the header file `pwd.h'.
-- Data Type: struct passwd
The `passwd' data structure is used to hold information about
entries in the system user data base. It has at least the
following members:
`char *pw_name'
The user's login name.
`char *pw_passwd.'
The encrypted password string.
`uid_t pw_uid'
The user ID number.
`gid_t pw_gid'
The user's default group ID number.
`char *pw_gecos'
A string typically containing the user's real name, and
possibly other information such as a phone number.
`char *pw_dir'
The user's home directory, or initial working directory.
This might be a null pointer, in which case the
interpretation is system-dependent.
`char *pw_shell'
The user's default shell, or the initial program run when the
user logs in. This might be a null pointer, indicating that
the system default should be used.

File: libc.info, Node: Lookup User, Next: Scanning All Users, Prev: User Data Structure, Up: User Database
29.13.2 Looking Up One User
---------------------------
You can search the system user database for information about a
specific user using `getpwuid' or `getpwnam'. These functions are
declared in `pwd.h'.
-- Function: struct passwd * getpwuid (uid_t UID)
This function returns a pointer to a statically-allocated structure
containing information about the user whose user ID is UID. This
structure may be overwritten on subsequent calls to `getpwuid'.
A null pointer value indicates there is no user in the data base
with user ID UID.
-- Function: int getpwuid_r (uid_t UID, struct passwd *RESULT_BUF,
char *BUFFER, size_t BUFLEN, struct passwd **RESULT)
This function is similar to `getpwuid' in that it returns
information about the user whose user ID is UID. However, it
fills the user supplied structure pointed to by RESULT_BUF with
the information instead of using a static buffer. The first
BUFLEN bytes of the additional buffer pointed to by BUFFER are
used to contain additional information, normally strings which are
pointed to by the elements of the result structure.
If a user with ID UID is found, the pointer returned in RESULT
points to the record which contains the wanted data (i.e., RESULT
contains the value RESULT_BUF). If no user is found or if an
error occurred, the pointer returned in RESULT is a null pointer.
The function returns zero or an error code. If the buffer BUFFER
is too small to contain all the needed information, the error code
`ERANGE' is returned and ERRNO is set to `ERANGE'.
-- Function: struct passwd * getpwnam (const char *NAME)
This function returns a pointer to a statically-allocated structure
containing information about the user whose user name is NAME.
This structure may be overwritten on subsequent calls to
`getpwnam'.
A null pointer return indicates there is no user named NAME.
-- Function: int getpwnam_r (const char *NAME, struct passwd
*RESULT_BUF, char *BUFFER, size_t BUFLEN, struct passwd
**RESULT)
This function is similar to `getpwnam' in that is returns
information about the user whose user name is NAME. However, like
`getpwuid_r', it fills the user supplied buffers in RESULT_BUF and
BUFFER with the information instead of using a static buffer.
The return values are the same as for `getpwuid_r'.

File: libc.info, Node: Scanning All Users, Next: Writing a User Entry, Prev: Lookup User, Up: User Database
29.13.3 Scanning the List of All Users
--------------------------------------
This section explains how a program can read the list of all users in
the system, one user at a time. The functions described here are
declared in `pwd.h'.
You can use the `fgetpwent' function to read user entries from a
particular file.
-- Function: struct passwd * fgetpwent (FILE *STREAM)
This function reads the next user entry from STREAM and returns a
pointer to the entry. The structure is statically allocated and is
rewritten on subsequent calls to `fgetpwent'. You must copy the
contents of the structure if you wish to save the information.
The stream must correspond to a file in the same format as the
standard password database file.
-- Function: int fgetpwent_r (FILE *STREAM, struct passwd *RESULT_BUF,
char *BUFFER, size_t BUFLEN, struct passwd **RESULT)
This function is similar to `fgetpwent' in that it reads the next
user entry from STREAM. But the result is returned in the
structure pointed to by RESULT_BUF. The first BUFLEN bytes of the
additional buffer pointed to by BUFFER are used to contain
additional information, normally strings which are pointed to by
the elements of the result structure.
The stream must correspond to a file in the same format as the
standard password database file.
If the function returns zero RESULT points to the structure with
the wanted data (normally this is in RESULT_BUF). If errors
occurred the return value is nonzero and RESULT contains a null
pointer.
The way to scan all the entries in the user database is with
`setpwent', `getpwent', and `endpwent'.
-- Function: void setpwent (void)
This function initializes a stream which `getpwent' and
`getpwent_r' use to read the user database.
-- Function: struct passwd * getpwent (void)
The `getpwent' function reads the next entry from the stream
initialized by `setpwent'. It returns a pointer to the entry. The
structure is statically allocated and is rewritten on subsequent
calls to `getpwent'. You must copy the contents of the structure
if you wish to save the information.
A null pointer is returned when no more entries are available.
-- Function: int getpwent_r (struct passwd *RESULT_BUF, char *BUFFER,
size_t BUFLEN, struct passwd **RESULT)
This function is similar to `getpwent' in that it returns the next
entry from the stream initialized by `setpwent'. Like
`fgetpwent_r', it uses the user-supplied buffers in RESULT_BUF and
BUFFER to return the information requested.
The return values are the same as for `fgetpwent_r'.
-- Function: void endpwent (void)
This function closes the internal stream used by `getpwent' or
`getpwent_r'.

File: libc.info, Node: Writing a User Entry, Prev: Scanning All Users, Up: User Database
29.13.4 Writing a User Entry
----------------------------
-- Function: int putpwent (const struct passwd *P, FILE *STREAM)
This function writes the user entry `*P' to the stream STREAM, in
the format used for the standard user database file. The return
value is zero on success and nonzero on failure.
This function exists for compatibility with SVID. We recommend
that you avoid using it, because it makes sense only on the
assumption that the `struct passwd' structure has no members
except the standard ones; on a system which merges the traditional
Unix data base with other extended information about users, adding
an entry using this function would inevitably leave out much of
the important information.
The group and user ID fields are left empty if the group or user
name starts with a - or +.
The function `putpwent' is declared in `pwd.h'.

File: libc.info, Node: Group Database, Next: Database Example, Prev: User Database, Up: Users and Groups
29.14 Group Database
====================
This section describes how to search and scan the database of
registered groups. The database itself is kept in the file
`/etc/group' on most systems, but on some systems a special network
service provides access to it.
* Menu:
* Group Data Structure:: What each group record contains.
* Lookup Group:: How to look for a particular group.
* Scanning All Groups:: Scanning the list of all groups.

File: libc.info, Node: Group Data Structure, Next: Lookup Group, Up: Group Database
29.14.1 The Data Structure for a Group
--------------------------------------
The functions and data structures for accessing the system group
database are declared in the header file `grp.h'.
-- Data Type: struct group
The `group' structure is used to hold information about an entry in
the system group database. It has at least the following members:
`char *gr_name'
The name of the group.
`gid_t gr_gid'
The group ID of the group.
`char **gr_mem'
A vector of pointers to the names of users in the group.
Each user name is a null-terminated string, and the vector
itself is terminated by a null pointer.

File: libc.info, Node: Lookup Group, Next: Scanning All Groups, Prev: Group Data Structure, Up: Group Database
29.14.2 Looking Up One Group
----------------------------
You can search the group database for information about a specific
group using `getgrgid' or `getgrnam'. These functions are declared in
`grp.h'.
-- Function: struct group * getgrgid (gid_t GID)
This function returns a pointer to a statically-allocated structure
containing information about the group whose group ID is GID.
This structure may be overwritten by subsequent calls to
`getgrgid'.
A null pointer indicates there is no group with ID GID.
-- Function: int getgrgid_r (gid_t GID, struct group *RESULT_BUF, char
*BUFFER, size_t BUFLEN, struct group **RESULT)
This function is similar to `getgrgid' in that it returns
information about the group whose group ID is GID. However, it
fills the user supplied structure pointed to by RESULT_BUF with
the information instead of using a static buffer. The first
BUFLEN bytes of the additional buffer pointed to by BUFFER are
used to contain additional information, normally strings which are
pointed to by the elements of the result structure.
If a group with ID GID is found, the pointer returned in RESULT
points to the record which contains the wanted data (i.e., RESULT
contains the value RESULT_BUF). If no group is found or if an
error occurred, the pointer returned in RESULT is a null pointer.
The function returns zero or an error code. If the buffer BUFFER
is too small to contain all the needed information, the error code
`ERANGE' is returned and ERRNO is set to `ERANGE'.
-- Function: struct group * getgrnam (const char *NAME)
This function returns a pointer to a statically-allocated structure
containing information about the group whose group name is NAME.
This structure may be overwritten by subsequent calls to
`getgrnam'.
A null pointer indicates there is no group named NAME.
-- Function: int getgrnam_r (const char *NAME, struct group
*RESULT_BUF, char *BUFFER, size_t BUFLEN, struct group
**RESULT)
This function is similar to `getgrnam' in that is returns
information about the group whose group name is NAME. Like
`getgrgid_r', it uses the user supplied buffers in RESULT_BUF and
BUFFER, not a static buffer.
The return values are the same as for `getgrgid_r' `ERANGE'.

File: libc.info, Node: Scanning All Groups, Prev: Lookup Group, Up: Group Database
29.14.3 Scanning the List of All Groups
---------------------------------------
This section explains how a program can read the list of all groups in
the system, one group at a time. The functions described here are
declared in `grp.h'.
You can use the `fgetgrent' function to read group entries from a
particular file.
-- Function: struct group * fgetgrent (FILE *STREAM)
The `fgetgrent' function reads the next entry from STREAM. It
returns a pointer to the entry. The structure is statically
allocated and is overwritten on subsequent calls to `fgetgrent'.
You must copy the contents of the structure if you wish to save the
information.
The stream must correspond to a file in the same format as the
standard group database file.
-- Function: int fgetgrent_r (FILE *STREAM, struct group *RESULT_BUF,
char *BUFFER, size_t BUFLEN, struct group **RESULT)
This function is similar to `fgetgrent' in that it reads the next
user entry from STREAM. But the result is returned in the
structure pointed to by RESULT_BUF. The first BUFLEN bytes of the
additional buffer pointed to by BUFFER are used to contain
additional information, normally strings which are pointed to by
the elements of the result structure.
This stream must correspond to a file in the same format as the
standard group database file.
If the function returns zero RESULT points to the structure with
the wanted data (normally this is in RESULT_BUF). If errors
occurred the return value is non-zero and RESULT contains a null
pointer.
The way to scan all the entries in the group database is with
`setgrent', `getgrent', and `endgrent'.
-- Function: void setgrent (void)
This function initializes a stream for reading from the group data
base. You use this stream by calling `getgrent' or `getgrent_r'.
-- Function: struct group * getgrent (void)
The `getgrent' function reads the next entry from the stream
initialized by `setgrent'. It returns a pointer to the entry. The
structure is statically allocated and is overwritten on subsequent
calls to `getgrent'. You must copy the contents of the structure
if you wish to save the information.
-- Function: int getgrent_r (struct group *RESULT_BUF, char *BUFFER,
size_t BUFLEN, struct group **RESULT)
This function is similar to `getgrent' in that it returns the next
entry from the stream initialized by `setgrent'. Like
`fgetgrent_r', it places the result in user-supplied buffers
pointed to RESULT_BUF and BUFFER.
If the function returns zero RESULT contains a pointer to the data
(normally equal to RESULT_BUF). If errors occurred the return
value is non-zero and RESULT contains a null pointer.
-- Function: void endgrent (void)
This function closes the internal stream used by `getgrent' or
`getgrent_r'.

File: libc.info, Node: Database Example, Next: Netgroup Database, Prev: Group Database, Up: Users and Groups
29.15 User and Group Database Example
=====================================
Here is an example program showing the use of the system database
inquiry functions. The program prints some information about the user
running the program.
#include <grp.h>
#include <pwd.h>
#include <sys/types.h>
#include <unistd.h>
#include <stdlib.h>
int
main (void)
{
uid_t me;
struct passwd *my_passwd;
struct group *my_group;
char **members;
/* Get information about the user ID. */
me = getuid ();
my_passwd = getpwuid (me);
if (!my_passwd)
{
printf ("Couldn't find out about user %d.\n", (int) me);
exit (EXIT_FAILURE);
}
/* Print the information. */
printf ("I am %s.\n", my_passwd->pw_gecos);
printf ("My login name is %s.\n", my_passwd->pw_name);
printf ("My uid is %d.\n", (int) (my_passwd->pw_uid));
printf ("My home directory is %s.\n", my_passwd->pw_dir);
printf ("My default shell is %s.\n", my_passwd->pw_shell);
/* Get information about the default group ID. */
my_group = getgrgid (my_passwd->pw_gid);
if (!my_group)
{
printf ("Couldn't find out about group %d.\n",
(int) my_passwd->pw_gid);
exit (EXIT_FAILURE);
}
/* Print the information. */
printf ("My default group is %s (%d).\n",
my_group->gr_name, (int) (my_passwd->pw_gid));
printf ("The members of this group are:\n");
members = my_group->gr_mem;
while (*members)
{
printf (" %s\n", *(members));
members++;
}
return EXIT_SUCCESS;
}
Here is some output from this program:
I am Throckmorton Snurd.
My login name is snurd.
My uid is 31093.
My home directory is /home/fsg/snurd.
My default shell is /bin/sh.
My default group is guest (12).
The members of this group are:
friedman
tami

File: libc.info, Node: Netgroup Database, Prev: Database Example, Up: Users and Groups
29.16 Netgroup Database
=======================
* Menu:
* Netgroup Data:: Data in the Netgroup database and where
it comes from.
* Lookup Netgroup:: How to look for a particular netgroup.
* Netgroup Membership:: How to test for netgroup membership.

File: libc.info, Node: Netgroup Data, Next: Lookup Netgroup, Up: Netgroup Database
29.16.1 Netgroup Data
---------------------
Sometimes it is useful to group users according to other criteria
(*note Group Database::). E.g., it is useful to associate a certain
group of users with a certain machine. On the other hand grouping of
host names is not supported so far.
In Sun Microsystems SunOS appeared a new kind of database, the
netgroup database. It allows grouping hosts, users, and domains
freely, giving them individual names. To be more concrete, a netgroup
is a list of triples consisting of a host name, a user name, and a
domain name where any of the entries can be a wildcard entry matching
all inputs. A last possibility is that names of other netgroups can
also be given in the list specifying a netgroup. So one can construct
arbitrary hierarchies without loops.
Sun's implementation allows netgroups only for the `nis' or
`nisplus' service, *note Services in the NSS configuration::. The
implementation in the GNU C Library has no such restriction. An entry
in either of the input services must have the following form:
GROUPNAME ( GROUPNAME | `('HOSTNAME`,'USERNAME`,'`domainname'`)' )+
Any of the fields in the triple can be empty which means anything
matches. While describing the functions we will see that the opposite
case is useful as well. I.e., there may be entries which will not
match any input. For entries like this, a name consisting of the single
character `-' shall be used.

File: libc.info, Node: Lookup Netgroup, Next: Netgroup Membership, Prev: Netgroup Data, Up: Netgroup Database
29.16.2 Looking up one Netgroup
-------------------------------
The lookup functions for netgroups are a bit different to all other
system database handling functions. Since a single netgroup can contain
many entries a two-step process is needed. First a single netgroup is
selected and then one can iterate over all entries in this netgroup.
These functions are declared in `netdb.h'.
-- Function: int setnetgrent (const char *NETGROUP)
A call to this function initializes the internal state of the
library to allow following calls of the `getnetgrent' to iterate
over all entries in the netgroup with name NETGROUP.
When the call is successful (i.e., when a netgroup with this name
exists) the return value is `1'. When the return value is `0' no
netgroup of this name is known or some other error occurred.
It is important to remember that there is only one single state for
iterating the netgroups. Even if the programmer uses the
`getnetgrent_r' function the result is not really reentrant since
always only one single netgroup at a time can be processed. If the
program needs to process more than one netgroup simultaneously she must
protect this by using external locking. This problem was introduced in
the original netgroups implementation in SunOS and since we must stay
compatible it is not possible to change this.
Some other functions also use the netgroups state. Currently these
are the `innetgr' function and parts of the implementation of the
`compat' service part of the NSS implementation.
-- Function: int getnetgrent (char **HOSTP, char **USERP, char
**DOMAINP)
This function returns the next unprocessed entry of the currently
selected netgroup. The string pointers, in which addresses are
passed in the arguments HOSTP, USERP, and DOMAINP, will contain
after a successful call pointers to appropriate strings. If the
string in the next entry is empty the pointer has the value `NULL'.
The returned string pointers are only valid if none of the netgroup
related functions are called.
The return value is `1' if the next entry was successfully read. A
value of `0' means no further entries exist or internal errors
occurred.
-- Function: int getnetgrent_r (char **HOSTP, char **USERP, char
**DOMAINP, char *BUFFER, size_t BUFLEN)
This function is similar to `getnetgrent' with only one exception:
the strings the three string pointers HOSTP, USERP, and DOMAINP
point to, are placed in the buffer of BUFLEN bytes starting at
BUFFER. This means the returned values are valid even after other
netgroup related functions are called.
The return value is `1' if the next entry was successfully read and
the buffer contains enough room to place the strings in it. `0' is
returned in case no more entries are found, the buffer is too
small, or internal errors occurred.
This function is a GNU extension. The original implementation in
the SunOS libc does not provide this function.
-- Function: void endnetgrent (void)
This function frees all buffers which were allocated to process
the last selected netgroup. As a result all string pointers
returned by calls to `getnetgrent' are invalid afterwards.

File: libc.info, Node: Netgroup Membership, Prev: Lookup Netgroup, Up: Netgroup Database
29.16.3 Testing for Netgroup Membership
---------------------------------------
It is often not necessary to scan the whole netgroup since often the
only interesting question is whether a given entry is part of the
selected netgroup.
-- Function: int innetgr (const char *NETGROUP, const char *HOST,
const char *USER, const char *DOMAIN)
This function tests whether the triple specified by the parameters
HOSTP, USERP, and DOMAINP is part of the netgroup NETGROUP. Using
this function has the advantage that
1. no other netgroup function can use the global netgroup state
since internal locking is used and
2. the function is implemented more efficiently than successive
calls to the other `set'/`get'/`endnetgrent' functions.
Any of the pointers HOSTP, USERP, and DOMAINP can be `NULL' which
means any value is accepted in this position. This is also true
for the name `-' which should not match any other string otherwise.
The return value is `1' if an entry matching the given triple is
found in the netgroup. The return value is `0' if the netgroup
itself is not found, the netgroup does not contain the triple or
internal errors occurred.

File: libc.info, Node: System Management, Next: System Configuration, Prev: Users and Groups, Up: Top
30 System Management
********************
This chapter describes facilities for controlling the system that
underlies a process (including the operating system and hardware) and
for getting information about it. Anyone can generally use the
informational facilities, but usually only a properly privileged process
can make changes.
* Menu:
* Host Identification:: Determining the name of the machine.
* Platform Type:: Determining operating system and basic
machine type
* Filesystem Handling:: Controlling/querying mounts
* System Parameters:: Getting and setting various system parameters
To get information on parameters of the system that are built into
the system, such as the maximum length of a filename, *note System
Configuration::.

File: libc.info, Node: Host Identification, Next: Platform Type, Up: System Management
30.1 Host Identification
========================
This section explains how to identify the particular system on which
your program is running. First, let's review the various ways computer
systems are named, which is a little complicated because of the history
of the development of the Internet.
Every Unix system (also known as a host) has a host name, whether
it's connected to a network or not. In its simplest form, as used
before computer networks were an issue, it's just a word like `chicken'.
But any system attached to the Internet or any network like it
conforms to a more rigorous naming convention as part of the Domain
Name System (DNS). In DNS, every host name is composed of two parts:
1. hostname
2. domain name
You will note that "hostname" looks a lot like "host name", but is
not the same thing, and that people often incorrectly refer to entire
host names as "domain names."
In DNS, the full host name is properly called the FQDN (Fully
Qualified Domain Name) and consists of the hostname, then a period,
then the domain name. The domain name itself usually has multiple
components separated by periods. So for example, a system's hostname
may be `chicken' and its domain name might be `ai.mit.edu', so its FQDN
(which is its host name) is `chicken.ai.mit.edu'.
Adding to the confusion, though, is that DNS is not the only name
space in which a computer needs to be known. Another name space is the
NIS (aka YP) name space. For NIS purposes, there is another domain
name, which is called the NIS domain name or the YP domain name. It
need not have anything to do with the DNS domain name.
Confusing things even more is the fact that in DNS, it is possible
for multiple FQDNs to refer to the same system. However, there is
always exactly one of them that is the true host name, and it is called
the canonical FQDN.
In some contexts, the host name is called a "node name."
For more information on DNS host naming, see *note Host Names::.
Prototypes for these functions appear in `unistd.h'.
The programs `hostname', `hostid', and `domainname' work by calling
these functions.
-- Function: int gethostname (char *NAME, size_t SIZE)
This function returns the host name of the system on which it is
called, in the array NAME. The SIZE argument specifies the size of
this array, in bytes. Note that this is _not_ the DNS hostname.
If the system participates in DNS, this is the FQDN (see above).
The return value is `0' on success and `-1' on failure. In the
GNU C Library, `gethostname' fails if SIZE is not large enough;
then you can try again with a larger array. The following `errno'
error condition is defined for this function:
`ENAMETOOLONG'
The SIZE argument is less than the size of the host name plus
one.
On some systems, there is a symbol for the maximum possible host
name length: `MAXHOSTNAMELEN'. It is defined in `sys/param.h'.
But you can't count on this to exist, so it is cleaner to handle
failure and try again.
`gethostname' stores the beginning of the host name in NAME even
if the host name won't entirely fit. For some purposes, a
truncated host name is good enough. If it is, you can ignore the
error code.
-- Function: int sethostname (const char *NAME, size_t LENGTH)
The `sethostname' function sets the host name of the system that
calls it to NAME, a string with length LENGTH. Only privileged
processes are permitted to do this.
Usually `sethostname' gets called just once, at system boot time.
Often, the program that calls it sets it to the value it finds in
the file `/etc/hostname'.
Be sure to set the host name to the full host name, not just the
DNS hostname (see above).
The return value is `0' on success and `-1' on failure. The
following `errno' error condition is defined for this function:
`EPERM'
This process cannot set the host name because it is not
privileged.
-- Function: int getdomainnname (char *NAME, size_t LENGTH)
`getdomainname' returns the NIS (aka YP) domain name of the system
on which it is called. Note that this is not the more popular DNS
domain name. Get that with `gethostname'.
The specifics of this function are analogous to `gethostname',
above.
-- Function: int setdomainname (const char *NAME, size_t LENGTH)
`getdomainname' sets the NIS (aka YP) domain name of the system on
which it is called. Note that this is not the more popular DNS
domain name. Set that with `sethostname'.
The specifics of this function are analogous to `sethostname',
above.
-- Function: long int gethostid (void)
This function returns the "host ID" of the machine the program is
running on. By convention, this is usually the primary Internet
IP address of that machine, converted to a `long int'. However,
on some systems it is a meaningless but unique number which is
hard-coded for each machine.
This is not widely used. It arose in BSD 4.2, but was dropped in
BSD 4.4. It is not required by POSIX.
The proper way to query the IP address is to use `gethostbyname'
on the results of `gethostname'. For more information on IP
addresses, *Note Host Addresses::.
-- Function: int sethostid (long int ID)
The `sethostid' function sets the "host ID" of the host machine to
ID. Only privileged processes are permitted to do this. Usually
it happens just once, at system boot time.
The proper way to establish the primary IP address of a system is
to configure the IP address resolver to associate that IP address
with the system's host name as returned by `gethostname'. For
example, put a record for the system in `/etc/hosts'.
See `gethostid' above for more information on host ids.
The return value is `0' on success and `-1' on failure. The
following `errno' error conditions are defined for this function:
`EPERM'
This process cannot set the host name because it is not
privileged.
`ENOSYS'
The operating system does not support setting the host ID.
On some systems, the host ID is a meaningless but unique
number hard-coded for each machine.

File: libc.info, Node: Platform Type, Next: Filesystem Handling, Prev: Host Identification, Up: System Management
30.2 Platform Type Identification
=================================
You can use the `uname' function to find out some information about the
type of computer your program is running on. This function and the
associated data type are declared in the header file `sys/utsname.h'.
As a bonus, `uname' also gives some information identifying the
particular system your program is running on. This is the same
information which you can get with functions targetted to this purpose
described in *note Host Identification::.
-- Data Type: struct utsname
The `utsname' structure is used to hold information returned by
the `uname' function. It has the following members:
`char sysname[]'
This is the name of the operating system in use.
`char release[]'
This is the current release level of the operating system
implementation.
`char version[]'
This is the current version level within the release of the
operating system.
`char machine[]'
This is a description of the type of hardware that is in use.
Some systems provide a mechanism to interrogate the kernel
directly for this information. On systems without such a
mechanism, the GNU C Library fills in this field based on the
configuration name that was specified when building and
installing the library.
GNU uses a three-part name to describe a system
configuration; the three parts are CPU, MANUFACTURER and
SYSTEM-TYPE, and they are separated with dashes. Any
possible combination of three names is potentially
meaningful, but most such combinations are meaningless in
practice and even the meaningful ones are not necessarily
supported by any particular GNU program.
Since the value in `machine' is supposed to describe just the
hardware, it consists of the first two parts of the
configuration name: `CPU-MANUFACTURER'. For example, it
might be one of these:
`"sparc-sun"', `"i386-ANYTHING"', `"m68k-hp"',
`"m68k-sony"', `"m68k-sun"', `"mips-dec"'
`char nodename[]'
This is the host name of this particular computer. In the
GNU C Library, the value is the same as that returned by
`gethostname'; see *note Host Identification::.
gethostname() is implemented with a call to uname().
`char domainname[]'
This is the NIS or YP domain name. It is the same value
returned by `getdomainname'; see *note Host Identification::.
This element is a relatively recent invention and use of it
is not as portable as use of the rest of the structure.
-- Function: int uname (struct utsname *INFO)
The `uname' function fills in the structure pointed to by INFO
with information about the operating system and host machine. A
non-negative value indicates that the data was successfully stored.
`-1' as the value indicates an error. The only error possible is
`EFAULT', which we normally don't mention as it is always a
possibility.

File: libc.info, Node: Filesystem Handling, Next: System Parameters, Prev: Platform Type, Up: System Management
30.3 Controlling and Querying Mounts
====================================
All files are in filesystems, and before you can access any file, its
filesystem must be mounted. Because of Unix's concept of _Everything
is a file_, mounting of filesystems is central to doing almost
anything. This section explains how to find out what filesystems are
currently mounted and what filesystems are available for mounting, and
how to change what is mounted.
The classic filesystem is the contents of a disk drive. The concept
is considerably more abstract, though, and lots of things other than
disk drives can be mounted.
Some block devices don't correspond to traditional devices like disk
drives. For example, a loop device is a block device whose driver uses
a regular file in another filesystem as its medium. So if that regular
file contains appropriate data for a filesystem, you can by mounting the
loop device essentially mount a regular file.
Some filesystems aren't based on a device of any kind. The "proc"
filesystem, for example, contains files whose data is made up by the
filesystem driver on the fly whenever you ask for it. And when you
write to it, the data you write causes changes in the system. No data
gets stored.
* Menu:
* Mount Information:: What is or could be mounted?
* Mount-Unmount-Remount:: Controlling what is mounted and how

File: libc.info, Node: Mount Information, Next: Mount-Unmount-Remount, Up: Filesystem Handling
30.3.1 Mount Information
------------------------
For some programs it is desirable and necessary to access information
about whether a certain filesystem is mounted and, if it is, where, or
simply to get lists of all the available filesystems. The GNU C Library
provides some functions to retrieve this information portably.
Traditionally Unix systems have a file named `/etc/fstab' which
describes all possibly mounted filesystems. The `mount' program uses
this file to mount at startup time of the system all the necessary
filesystems. The information about all the filesystems actually
mounted is normally kept in a file named either `/var/run/mtab' or
`/etc/mtab'. Both files share the same syntax and it is crucial that
this syntax is followed all the time. Therefore it is best to never
directly write the files. The functions described in this section can
do this and they also provide the functionality to convert the external
textual representation to the internal representation.
Note that the `fstab' and `mtab' files are maintained on a system by
_convention_. It is possible for the files not to exist or not to be
consistent with what is really mounted or available to mount, if the
system's administration policy allows it. But programs that mount and
unmount filesystems typically maintain and use these files as described
herein.
The filenames given above should never be used directly. The
portable way to handle these file is to use the macro `_PATH_FSTAB',
defined in `fstab.h', or `_PATH_MNTTAB', defined in `mntent.h' and
`paths.h', for `fstab'; and the macro `_PATH_MOUNTED', also defined in
`mntent.h' and `paths.h', for `mtab'. There are also two alternate
macro names `FSTAB', `MNTTAB', and `MOUNTED' defined but these names
are deprecated and kept only for backward compatibility. The names
`_PATH_MNTTAB' and `_PATH_MOUNTED' should always be used.
* Menu:
* fstab:: The `fstab' file
* mtab:: The `mtab' file
* Other Mount Information:: Other (non-libc) sources of mount information

File: libc.info, Node: fstab, Next: mtab, Up: Mount Information
30.3.1.1 The `fstab' file
.........................
The internal representation for entries of the file is `struct fstab',
defined in `fstab.h'.
-- Data Type: struct fstab
This structure is used with the `getfsent', `getfsspec', and
`getfsfile' functions.
`char *fs_spec'
This element describes the device from which the filesystem
is mounted. Normally this is the name of a special device,
such as a hard disk partition, but it could also be a more or
less generic string. For "NFS" it would be a hostname and
directory name combination.
Even though the element is not declared `const' it shouldn't
be modified. The missing `const' has historic reasons, since
this function predates ISO C. The same is true for the other
string elements of this structure.
`char *fs_file'
This describes the mount point on the local system. I.e.,
accessing any file in this filesystem has implicitly or
explicitly this string as a prefix.
`char *fs_vfstype'
This is the type of the filesystem. Depending on what the
underlying kernel understands it can be any string.
`char *fs_mntops'
This is a string containing options passed to the kernel with
the `mount' call. Again, this can be almost anything. There
can be more than one option, separated from the others by a
comma. Each option consists of a name and an optional value
part, introduced by an `=' character.
If the value of this element must be processed it should
ideally be done using the `getsubopt' function; see *note
Suboptions::.
`const char *fs_type'
This name is poorly chosen. This element points to a string
(possibly in the `fs_mntops' string) which describes the
modes with which the filesystem is mounted. `fstab' defines
five macros to describe the possible values:
`FSTAB_RW'
The filesystems gets mounted with read and write enabled.
`FSTAB_RQ'
The filesystems gets mounted with read and write
enabled. Write access is restricted by quotas.
`FSTAB_RO'
The filesystem gets mounted read-only.
`FSTAB_SW'
This is not a real filesystem, it is a swap device.
`FSTAB_XX'
This entry from the `fstab' file is totally ignored.
Testing for equality with these value must happen using
`strcmp' since these are all strings. Comparing the pointer
will probably always fail.
`int fs_freq'
This element describes the dump frequency in days.
`int fs_passno'
This element describes the pass number on parallel dumps. It
is closely related to the `dump' utility used on Unix systems.
To read the entire content of the of the `fstab' file the GNU C
Library contains a set of three functions which are designed in the
usual way.
-- Function: int setfsent (void)
This function makes sure that the internal read pointer for the
`fstab' file is at the beginning of the file. This is done by
either opening the file or resetting the read pointer.
Since the file handle is internal to the libc this function is not
thread-safe.
This function returns a non-zero value if the operation was
successful and the `getfs*' functions can be used to read the
entries of the file.
-- Function: void endfsent (void)
This function makes sure that all resources acquired by a prior
call to `setfsent' (explicitly or implicitly by calling
`getfsent') are freed.
-- Function: struct fstab * getfsent (void)
This function returns the next entry of the `fstab' file. If this
is the first call to any of the functions handling `fstab' since
program start or the last call of `endfsent', the file will be
opened.
The function returns a pointer to a variable of type `struct
fstab'. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred `getfsent'
returns a `NULL' pointer.
-- Function: struct fstab * getfsspec (const char *NAME)
This function returns the next entry of the `fstab' file which has
a string equal to NAME pointed to by the `fs_spec' element. Since
there is normally exactly one entry for each special device it
makes no sense to call this function more than once for the same
argument. If this is the first call to any of the functions
handling `fstab' since program start or the last call of
`endfsent', the file will be opened.
The function returns a pointer to a variable of type `struct
fstab'. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred `getfsent'
returns a `NULL' pointer.
-- Function: struct fstab * getfsfile (const char *NAME)
This function returns the next entry of the `fstab' file which has
a string equal to NAME pointed to by the `fs_file' element. Since
there is normally exactly one entry for each mount point it makes
no sense to call this function more than once for the same
argument. If this is the first call to any of the functions
handling `fstab' since program start or the last call of
`endfsent', the file will be opened.
The function returns a pointer to a variable of type `struct
fstab'. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred `getfsent'
returns a `NULL' pointer.

File: libc.info, Node: mtab, Next: Other Mount Information, Prev: fstab, Up: Mount Information
30.3.1.2 The `mtab' file
........................
The following functions and data structure access the `mtab' file.
-- Data Type: struct mntent
This structure is used with the `getmntent', `getmntent_t',
`addmntent', and `hasmntopt' functions.
`char *mnt_fsname'
This element contains a pointer to a string describing the
name of the special device from which the filesystem is
mounted. It corresponds to the `fs_spec' element in `struct
fstab'.
`char *mnt_dir'
This element points to a string describing the mount point of
the filesystem. It corresponds to the `fs_file' element in
`struct fstab'.
`char *mnt_type'
`mnt_type' describes the filesystem type and is therefore
equivalent to `fs_vfstype' in `struct fstab'. `mntent.h'
defines a few symbolic names for some of the values this
string can have. But since the kernel can support arbitrary
filesystems it does not make much sense to give them symbolic
names. If one knows the symbol name one also knows the
filesystem name. Nevertheless here follows the list of the
symbols provided in `mntent.h'.
`MNTTYPE_IGNORE'
This symbol expands to `"ignore"'. The value is
sometime used in `fstab' files to make sure entries are
not used without removing them.
`MNTTYPE_NFS'
Expands to `"nfs"'. Using this macro sometimes could
make sense since it names the default NFS
implementation, in case both version 2 and 3 are
supported.
`MNTTYPE_SWAP'
This symbol expands to `"swap"'. It names the special
`fstab' entry which names one of the possibly multiple
swap partitions.
`char *mnt_opts'
The element contains a string describing the options used
while mounting the filesystem. As for the equivalent element
`fs_mntops' of `struct fstab' it is best to use the function
`getsubopt' (*note Suboptions::) to access the parts of this
string.
The `mntent.h' file defines a number of macros with string
values which correspond to some of the options understood by
the kernel. There might be many more options which are
possible so it doesn't make much sense to rely on these
macros but to be consistent here is the list:
`MNTOPT_DEFAULTS'
Expands to `"defaults"'. This option should be used
alone since it indicates all values for the customizable
values are chosen to be the default.
`MNTOPT_RO'
Expands to `"ro"'. See the `FSTAB_RO' value, it means
the filesystem is mounted read-only.
`MNTOPT_RW'
Expand to `"rw"'. See the `FSTAB_RW' value, it means the
filesystem is mounted with read and write permissions.
`MNTOPT_SUID'
Expands to `"suid"'. This means that the SUID bit
(*note How Change Persona::) is respected when a program
from the filesystem is started.
`MNTOPT_NOSUID'
Expands to `"nosuid"'. This is the opposite of
`MNTOPT_SUID', the SUID bit for all files from the
filesystem is ignored.
`MNTOPT_NOAUTO'
Expands to `"noauto"'. At startup time the `mount'
program will ignore this entry if it is started with the
`-a' option to mount all filesystems mentioned in the
`fstab' file.
As for the `FSTAB_*' entries introduced above it is important
to use `strcmp' to check for equality.
`mnt_freq'
This elements corresponds to `fs_freq' and also specifies the
frequency in days in which dumps are made.
`mnt_passno'
This element is equivalent to `fs_passno' with the same
meaning which is uninteresting for all programs beside `dump'.
For accessing the `mtab' file there is again a set of three
functions to access all entries in a row. Unlike the functions to
handle `fstab' these functions do not access a fixed file and there is
even a thread safe variant of the get function. Beside this the GNU C
Library contains functions to alter the file and test for specific
options.
-- Function: FILE * setmntent (const char *FILE, const char *MODE)
The `setmntent' function prepares the file named FILE which must
be in the format of a `fstab' and `mtab' file for the upcoming
processing through the other functions of the family. The MODE
parameter can be chosen in the way the OPENTYPE parameter for
`fopen' (*note Opening Streams::) can be chosen. If the file is
opened for writing the file is also allowed to be empty.
If the file was successfully opened `setmntent' returns a file
descriptor for future use. Otherwise the return value is `NULL'
and `errno' is set accordingly.
-- Function: int endmntent (FILE *STREAM)
This function takes for the STREAM parameter a file handle which
previously was returned from the `setmntent' call. `endmntent'
closes the stream and frees all resources.
The return value is 1 unless an error occurred in which case it is
0.
-- Function: struct mntent * getmntent (FILE *STREAM)
The `getmntent' function takes as the parameter a file handle
previously returned by successful call to `setmntent'. It returns
a pointer to a static variable of type `struct mntent' which is
filled with the information from the next entry from the file
currently read.
The file format used prescribes the use of spaces or tab
characters to separate the fields. This makes it harder to use
name containing one of these characters (e.g., mount points using
spaces). Therefore these characters are encoded in the files and
the `getmntent' function takes care of the decoding while reading
the entries back in. `'\040'' is used to encode a space
character, `'\011'' to encode a tab character, `'\012'' to encode
a newline character, and `'\\'' to encode a backslash.
If there was an error or the end of the file is reached the return
value is `NULL'.
This function is not thread-safe since all calls to this function
return a pointer to the same static variable. `getmntent_r'
should be used in situations where multiple threads access the
file.
-- Function: struct mntent * getmntent_r (FILE *STREAM, struct mntent
*RESULT, char *BUFFER, int BUFSIZE)
The `getmntent_r' function is the reentrant variant of
`getmntent'. It also returns the next entry from the file and
returns a pointer. The actual variable the values are stored in
is not static, though. Instead the function stores the values in
the variable pointed to by the RESULT parameter. Additional
information (e.g., the strings pointed to by the elements of the
result) are kept in the buffer of size BUFSIZE pointed to by
BUFFER.
Escaped characters (space, tab, backslash) are converted back in
the same way as it happens for `getmentent'.
The function returns a `NULL' pointer in error cases. Errors
could be:
* error while reading the file,
* end of file reached,
* BUFSIZE is too small for reading a complete new entry.
-- Function: int addmntent (FILE *STREAM, const struct mntent *MNT)
The `addmntent' function allows adding a new entry to the file
previously opened with `setmntent'. The new entries are always
appended. I.e., even if the position of the file descriptor is
not at the end of the file this function does not overwrite an
existing entry following the current position.
The implication of this is that to remove an entry from a file one
has to create a new file while leaving out the entry to be removed
and after closing the file remove the old one and rename the new
file to the chosen name.
This function takes care of spaces and tab characters in the names
to be written to the file. It converts them and the backslash
character into the format describe in the `getmntent' description
above.
This function returns 0 in case the operation was successful.
Otherwise the return value is 1 and `errno' is set appropriately.
-- Function: char * hasmntopt (const struct mntent *MNT, const char
*OPT)
This function can be used to check whether the string pointed to
by the `mnt_opts' element of the variable pointed to by MNT
contains the option OPT. If this is true a pointer to the
beginning of the option in the `mnt_opts' element is returned. If
no such option exists the function returns `NULL'.
This function is useful to test whether a specific option is
present but when all options have to be processed one is better
off with using the `getsubopt' function to iterate over all
options in the string.

File: libc.info, Node: Other Mount Information, Prev: mtab, Up: Mount Information
30.3.1.3 Other (Non-libc) Sources of Mount Information
......................................................
On a system with a Linux kernel and the `proc' filesystem, you can get
information on currently mounted filesystems from the file `mounts' in
the `proc' filesystem. Its format is similar to that of the `mtab'
file, but represents what is truly mounted without relying on
facilities outside the kernel to keep `mtab' up to date.

File: libc.info, Node: Mount-Unmount-Remount, Prev: Mount Information, Up: Filesystem Handling
30.3.2 Mount, Unmount, Remount
------------------------------
This section describes the functions for mounting, unmounting, and
remounting filesystems.
Only the superuser can mount, unmount, or remount a filesystem.
These functions do not access the `fstab' and `mtab' files. You
should maintain and use these separately. *Note Mount Information::.
The symbols in this section are declared in `sys/mount.h'.
-- Function: int mount (const char *SPECIAL_FILE, const char *DIR,
const char *FSTYPE, unsigned long int OPTIONS, const void
*DATA)
`mount' mounts or remounts a filesystem. The two operations are
quite different and are merged rather unnaturally into this one
function. The `MS_REMOUNT' option, explained below, determines
whether `mount' mounts or remounts.
For a mount, the filesystem on the block device represented by the
device special file named SPECIAL_FILE gets mounted over the mount
point DIR. This means that the directory DIR (along with any
files in it) is no longer visible; in its place (and still with
the name DIR) is the root directory of the filesystem on the
device.
As an exception, if the filesystem type (see below) is one which
is not based on a device (e.g. "proc"), `mount' instantiates a
filesystem and mounts it over DIR and ignores SPECIAL_FILE.
For a remount, DIR specifies the mount point where the filesystem
to be remounted is (and remains) mounted and SPECIAL_FILE is
ignored. Remounting a filesystem means changing the options that
control operations on the filesystem while it is mounted. It does
not mean unmounting and mounting again.
For a mount, you must identify the type of the filesystem as
FSTYPE. This type tells the kernel how to access the filesystem
and can be thought of as the name of a filesystem driver. The
acceptable values are system dependent. On a system with a Linux
kernel and the `proc' filesystem, the list of possible values is
in the file `filesystems' in the `proc' filesystem (e.g. type `cat
/proc/filesystems' to see the list). With a Linux kernel, the
types of filesystems that `mount' can mount, and their type names,
depends on what filesystem drivers are configured into the kernel
or loaded as loadable kernel modules. An example of a common
value for FSTYPE is `ext2'.
For a remount, `mount' ignores FSTYPE.
OPTIONS specifies a variety of options that apply until the
filesystem is unmounted or remounted. The precise meaning of an
option depends on the filesystem and with some filesystems, an
option may have no effect at all. Furthermore, for some
filesystems, some of these options (but never `MS_RDONLY') can be
overridden for individual file accesses via `ioctl'.
OPTIONS is a bit string with bit fields defined using the
following mask and masked value macros:
`MS_MGC_MASK'
This multibit field contains a magic number. If it does not
have the value `MS_MGC_VAL', `mount' assumes all the
following bits are zero and the DATA argument is a null
string, regardless of their actual values.
`MS_REMOUNT'
This bit on means to remount the filesystem. Off means to
mount it.
`MS_RDONLY'
This bit on specifies that no writing to the filesystem shall
be allowed while it is mounted. This cannot be overridden by
`ioctl'. This option is available on nearly all filesystems.
`S_IMMUTABLE'
This bit on specifies that no writing to the files in the
filesystem shall be allowed while it is mounted. This can be
overridden for a particular file access by a properly
privileged call to `ioctl'. This option is a relatively new
invention and is not available on many filesystems.
`S_APPEND'
This bit on specifies that the only file writing that shall
be allowed while the filesystem is mounted is appending.
Some filesystems allow this to be overridden for a particular
process by a properly privileged call to `ioctl'. This is a
relatively new invention and is not available on many
filesystems.
`MS_NOSUID'
This bit on specifies that Setuid and Setgid permissions on
files in the filesystem shall be ignored while it is mounted.
`MS_NOEXEC'
This bit on specifies that no files in the filesystem shall
be executed while the filesystem is mounted.
`MS_NODEV'
This bit on specifies that no device special files in the
filesystem shall be accessible while the filesystem is
mounted.
`MS_SYNCHRONOUS'
This bit on specifies that all writes to the filesystem while
it is mounted shall be synchronous; i.e., data shall be
synced before each write completes rather than held in the
buffer cache.
`MS_MANDLOCK'
This bit on specifies that mandatory locks on files shall be
permitted while the filesystem is mounted.
`MS_NOATIME'
This bit on specifies that access times of files shall not be
updated when the files are accessed while the filesystem is
mounted.
`MS_NODIRATIME'
This bit on specifies that access times of directories shall
not be updated when the directories are accessed while the
filesystem in mounted.
Any bits not covered by the above masks should be set off;
otherwise, results are undefined.
The meaning of DATA depends on the filesystem type and is
controlled entirely by the filesystem driver in the kernel.
Example:
#include <sys/mount.h>
mount("/dev/hdb", "/cdrom", MS_MGC_VAL | MS_RDONLY | MS_NOSUID, "");
mount("/dev/hda2", "/mnt", MS_MGC_VAL | MS_REMOUNT, "");
Appropriate arguments for `mount' are conventionally recorded in
the `fstab' table. *Note Mount Information::.
The return value is zero if the mount or remount is successful.
Otherwise, it is `-1' and `errno' is set appropriately. The
values of `errno' are filesystem dependent, but here is a general
list:
`EPERM'
The process is not superuser.
`ENODEV'
The file system type FSTYPE is not known to the kernel.
`ENOTBLK'
The file DEV is not a block device special file.
`EBUSY'
* The device is already mounted.
* The mount point is busy. (E.g. it is some process'
working directory or has a filesystem mounted on it
already).
* The request is to remount read-only, but there are files
open for write.
`EINVAL'
* A remount was attempted, but there is no filesystem
mounted over the specified mount point.
* The supposed filesystem has an invalid superblock.
`EACCES'
* The filesystem is inherently read-only (possibly due to
a switch on the device) and the process attempted to
mount it read/write (by setting the `MS_RDONLY' bit off).
* SPECIAL_FILE or DIR is not accessible due to file
permissions.
* SPECIAL_FILE is not accessible because it is in a
filesystem that is mounted with the `MS_NODEV' option.
`EM_FILE'
The table of dummy devices is full. `mount' needs to create a
dummy device (aka "unnamed" device) if the filesystem being
mounted is not one that uses a device.
-- Function: int umount2 (const char *FILE, int FLAGS)
`umount2' unmounts a filesystem.
You can identify the filesystem to unmount either by the device
special file that contains the filesystem or by the mount point.
The effect is the same. Specify either as the string FILE.
FLAGS contains the one-bit field identified by the following mask
macro:
`MNT_FORCE'
This bit on means to force the unmounting even if the
filesystem is busy, by making it unbusy first. If the bit is
off and the filesystem is busy, `umount2' fails with `errno'
= `EBUSY'. Depending on the filesystem, this may override
all, some, or no busy conditions.
All other bits in FLAGS should be set to zero; otherwise, the
result is undefined.
Example:
#include <sys/mount.h>
umount2("/mnt", MNT_FORCE);
umount2("/dev/hdd1", 0);
After the filesystem is unmounted, the directory that was the
mount point is visible, as are any files in it.
As part of unmounting, `umount2' syncs the filesystem.
If the unmounting is successful, the return value is zero.
Otherwise, it is `-1' and `errno' is set accordingly:
`EPERM'
The process is not superuser.
`EBUSY'
The filesystem cannot be unmounted because it is busy. E.g.
it contains a directory that is some process's working
directory or a file that some process has open. With some
filesystems in some cases, you can avoid this failure with
the `MNT_FORCE' option.
`EINVAL'
FILE validly refers to a file, but that file is neither a
mount point nor a device special file of a currently mounted
filesystem.
This function is not available on all systems.
-- Function: int umount (const char *FILE)
`umount' does the same thing as `umount2' with FLAGS set to
zeroes. It is more widely available than `umount2' but since it
lacks the possibility to forcefully unmount a filesystem is
deprecated when `umount2' is also available.

File: libc.info, Node: System Parameters, Prev: Filesystem Handling, Up: System Management
30.4 System Parameters
======================
This section describes the `sysctl' function, which gets and sets a
variety of system parameters.
The symbols used in this section are declared in the file
`sys/sysctl.h'.
-- Function: int sysctl (int *NAMES, int NLEN, void *OLDVAL, size_t
*OLDLENP, void *NEWVAL, size_t NEWLEN)
`sysctl' gets or sets a specified system parameter. There are so
many of these parameters that it is not practical to list them all
here, but here are some examples:
* network domain name
* paging parameters
* network Address Resolution Protocol timeout time
* maximum number of files that may be open
* root filesystem device
* when kernel was built
The set of available parameters depends on the kernel
configuration and can change while the system is running,
particularly when you load and unload loadable kernel modules.
The system parameters with which `syslog' is concerned are arranged
in a hierarchical structure like a hierarchical filesystem. To
identify a particular parameter, you specify a path through the
structure in a way analogous to specifying the pathname of a file.
Each component of the path is specified by an integer and each of
these integers has a macro defined for it by `sys/sysctl.h'.
NAMES is the path, in the form of an array of integers. Each
component of the path is one element of the array, in order. NLEN
is the number of components in the path.
For example, the first component of the path for all the paging
parameters is the value `CTL_VM'. For the free page thresholds,
the second component of the path is `VM_FREEPG'. So to get the
free page threshold values, make NAMES an array containing the two
elements `CTL_VM' and `VM_FREEPG' and make NLEN = 2.
The format of the value of a parameter depends on the parameter.
Sometimes it is an integer; sometimes it is an ASCII string;
sometimes it is an elaborate structure. In the case of the free
page thresholds used in the example above, the parameter value is
a structure containing several integers.
In any case, you identify a place to return the parameter's value
with OLDVAL and specify the amount of storage available at that
location as *OLDLENP. *OLDLENP does double duty because it is
also the output location that contains the actual length of the
returned value.
If you don't want the parameter value returned, specify a null
pointer for OLDVAL.
To set the parameter, specify the address and length of the new
value as NEWVAL and NEWLEN. If you don't want to set the
parameter, specify a null pointer as NEWVAL.
If you get and set a parameter in the same `sysctl' call, the value
returned is the value of the parameter before it was set.
Each system parameter has a set of permissions similar to the
permissions for a file (including the permissions on directories
in its path) that determine whether you may get or set it. For
the purposes of these permissions, every parameter is considered
to be owned by the superuser and Group 0 so processes with that
effective uid or gid may have more access to system parameters.
Unlike with files, the superuser does not invariably have full
permission to all system parameters, because some of them are
designed not to be changed ever.
`sysctl' returns a zero return value if it succeeds. Otherwise, it
returns `-1' and sets `errno' appropriately. Besides the failures
that apply to all system calls, the following are the `errno'
codes for all possible failures:
`EPERM'
The process is not permitted to access one of the components
of the path of the system parameter or is not permitted to
access the system parameter itself in the way (read or write)
that it requested.
`ENOTDIR'
There is no system parameter corresponding to NAME.
`EFAULT'
OLDVAL is not null, which means the process wanted to read
the parameter, but *OLDLENP is zero, so there is no place to
return it.
`EINVAL'
* The process attempted to set a system parameter to a
value that is not valid for that parameter.
* The space provided for the return of the system
parameter is not the right size for that parameter.
`ENOMEM'
This value may be returned instead of the more correct
`EINVAL' in some cases where the space provided for the
return of the system parameter is too small.
If you have a Linux kernel with the `proc' filesystem, you can get
and set most of the same parameters by reading and writing to files in
the `sys' directory of the `proc' filesystem. In the `sys' directory,
the directory structure represents the hierarchical structure of the
parameters. E.g. you can display the free page thresholds with
cat /proc/sys/vm/freepages
Some more traditional and more widely available, though less general,
GNU C Library functions for getting and setting some of the same system
parameters are:
* `getdomainname', `setdomainname'
* `gethostname', `sethostname' (*Note Host Identification::.)
* `uname' (*Note Platform Type::.)
* `bdflush'

File: libc.info, Node: System Configuration, Next: Cryptographic Functions, Prev: System Management, Up: Top
31 System Configuration Parameters
**********************************
The functions and macros listed in this chapter give information about
configuration parameters of the operating system--for example, capacity
limits, presence of optional POSIX features, and the default path for
executable files (*note String Parameters::).
* Menu:
* General Limits:: Constants and functions that describe
various process-related limits that have
one uniform value for any given machine.
* System Options:: Optional POSIX features.
* Version Supported:: Version numbers of POSIX.1 and POSIX.2.
* Sysconf:: Getting specific configuration values
of general limits and system options.
* Minimums:: Minimum values for general limits.
* Limits for Files:: Size limitations that pertain to individual files.
These can vary between file systems
or even from file to file.
* Options for Files:: Optional features that some files may support.
* File Minimums:: Minimum values for file limits.
* Pathconf:: Getting the limit values for a particular file.
* Utility Limits:: Capacity limits of some POSIX.2 utility programs.
* Utility Minimums:: Minimum allowable values of those limits.
* String Parameters:: Getting the default search path.

File: libc.info, Node: General Limits, Next: System Options, Up: System Configuration
31.1 General Capacity Limits
============================
The POSIX.1 and POSIX.2 standards specify a number of parameters that
describe capacity limitations of the system. These limits can be fixed
constants for a given operating system, or they can vary from machine to
machine. For example, some limit values may be configurable by the
system administrator, either at run time or by rebuilding the kernel,
and this should not require recompiling application programs.
Each of the following limit parameters has a macro that is defined in
`limits.h' only if the system has a fixed, uniform limit for the
parameter in question. If the system allows different file systems or
files to have different limits, then the macro is undefined; use
`sysconf' to find out the limit that applies at a particular time on a
particular machine. *Note Sysconf::.
Each of these parameters also has another macro, with a name starting
with `_POSIX', which gives the lowest value that the limit is allowed
to have on _any_ POSIX system. *Note Minimums::.
-- Macro: int ARG_MAX
If defined, the unvarying maximum combined length of the ARGV and
ENVIRON arguments that can be passed to the `exec' functions.
-- Macro: int CHILD_MAX
If defined, the unvarying maximum number of processes that can
exist with the same real user ID at any one time. In BSD and GNU,
this is controlled by the `RLIMIT_NPROC' resource limit; *note
Limits on Resources::.
-- Macro: int OPEN_MAX
If defined, the unvarying maximum number of files that a single
process can have open simultaneously. In BSD and GNU, this is
controlled by the `RLIMIT_NOFILE' resource limit; *note Limits on
Resources::.
-- Macro: int STREAM_MAX
If defined, the unvarying maximum number of streams that a single
process can have open simultaneously. *Note Opening Streams::.
-- Macro: int TZNAME_MAX
If defined, the unvarying maximum length of a time zone name.
*Note Time Zone Functions::.
These limit macros are always defined in `limits.h'.
-- Macro: int NGROUPS_MAX
The maximum number of supplementary group IDs that one process can
have.
The value of this macro is actually a lower bound for the maximum.
That is, you can count on being able to have that many
supplementary group IDs, but a particular machine might let you
have even more. You can use `sysconf' to see whether a particular
machine will let you have more (*note Sysconf::).
-- Macro: ssize_t SSIZE_MAX
The largest value that can fit in an object of type `ssize_t'.
Effectively, this is the limit on the number of bytes that can be
read or written in a single operation.
This macro is defined in all POSIX systems because this limit is
never configurable.
-- Macro: int RE_DUP_MAX
The largest number of repetitions you are guaranteed is allowed in
the construct `\{MIN,MAX\}' in a regular expression.
The value of this macro is actually a lower bound for the maximum.
That is, you can count on being able to have that many
repetitions, but a particular machine might let you have even
more. You can use `sysconf' to see whether a particular machine
will let you have more (*note Sysconf::). And even the value that
`sysconf' tells you is just a lower bound--larger values might
work.
This macro is defined in all POSIX.2 systems, because POSIX.2 says
it should always be defined even if there is no specific imposed
limit.

File: libc.info, Node: System Options, Next: Version Supported, Prev: General Limits, Up: System Configuration
31.2 Overall System Options
===========================
POSIX defines certain system-specific options that not all POSIX systems
support. Since these options are provided in the kernel, not in the
library, simply using the GNU C Library does not guarantee any of these
features is supported; it depends on the system you are using.
You can test for the availability of a given option using the macros
in this section, together with the function `sysconf'. The macros are
defined only if you include `unistd.h'.
For the following macros, if the macro is defined in `unistd.h',
then the option is supported. Otherwise, the option may or may not be
supported; use `sysconf' to find out. *Note Sysconf::.
-- Macro: int _POSIX_JOB_CONTROL
If this symbol is defined, it indicates that the system supports
job control. Otherwise, the implementation behaves as if all
processes within a session belong to a single process group.
*Note Job Control::.
-- Macro: int _POSIX_SAVED_IDS
If this symbol is defined, it indicates that the system remembers
the effective user and group IDs of a process before it executes an
executable file with the set-user-ID or set-group-ID bits set, and
that explicitly changing the effective user or group IDs back to
these values is permitted. If this option is not defined, then if
a nonprivileged process changes its effective user or group ID to
the real user or group ID of the process, it can't change it back
again. *Note Enable/Disable Setuid::.
For the following macros, if the macro is defined in `unistd.h',
then its value indicates whether the option is supported. A value of
`-1' means no, and any other value means yes. If the macro is not
defined, then the option may or may not be supported; use `sysconf' to
find out. *Note Sysconf::.
-- Macro: int _POSIX2_C_DEV
If this symbol is defined, it indicates that the system has the
POSIX.2 C compiler command, `c89'. The GNU C Library always
defines this as `1', on the assumption that you would not have
installed it if you didn't have a C compiler.
-- Macro: int _POSIX2_FORT_DEV
If this symbol is defined, it indicates that the system has the
POSIX.2 Fortran compiler command, `fort77'. The GNU C Library
never defines this, because we don't know what the system has.
-- Macro: int _POSIX2_FORT_RUN
If this symbol is defined, it indicates that the system has the
POSIX.2 `asa' command to interpret Fortran carriage control. The
GNU C Library never defines this, because we don't know what the
system has.
-- Macro: int _POSIX2_LOCALEDEF
If this symbol is defined, it indicates that the system has the
POSIX.2 `localedef' command. The GNU C Library never defines
this, because we don't know what the system has.
-- Macro: int _POSIX2_SW_DEV
If this symbol is defined, it indicates that the system has the
POSIX.2 commands `ar', `make', and `strip'. The GNU C Library
always defines this as `1', on the assumption that you had to have
`ar' and `make' to install the library, and it's unlikely that
`strip' would be absent when those are present.

File: libc.info, Node: Version Supported, Next: Sysconf, Prev: System Options, Up: System Configuration
31.3 Which Version of POSIX is Supported
========================================
-- Macro: long int _POSIX_VERSION
This constant represents the version of the POSIX.1 standard to
which the implementation conforms. For an implementation
conforming to the 1995 POSIX.1 standard, the value is the integer
`199506L'.
`_POSIX_VERSION' is always defined (in `unistd.h') in any POSIX
system.
*Usage Note:* Don't try to test whether the system supports POSIX
by including `unistd.h' and then checking whether `_POSIX_VERSION'
is defined. On a non-POSIX system, this will probably fail
because there is no `unistd.h'. We do not know of _any_ way you
can reliably test at compilation time whether your target system
supports POSIX or whether `unistd.h' exists.
-- Macro: long int _POSIX2_C_VERSION
This constant represents the version of the POSIX.2 standard which
the library and system kernel support. We don't know what value
this will be for the first version of the POSIX.2 standard,
because the value is based on the year and month in which the
standard is officially adopted.
The value of this symbol says nothing about the utilities
installed on the system.
*Usage Note:* You can use this macro to tell whether a POSIX.1
system library supports POSIX.2 as well. Any POSIX.1 system
contains `unistd.h', so include that file and then test `defined
(_POSIX2_C_VERSION)'.

File: libc.info, Node: Sysconf, Next: Minimums, Prev: Version Supported, Up: System Configuration
31.4 Using `sysconf'
====================
When your system has configurable system limits, you can use the
`sysconf' function to find out the value that applies to any particular
machine. The function and the associated PARAMETER constants are
declared in the header file `unistd.h'.
* Menu:
* Sysconf Definition:: Detailed specifications of `sysconf'.
* Constants for Sysconf:: The list of parameters `sysconf' can read.
* Examples of Sysconf:: How to use `sysconf' and the parameter
macros properly together.

File: libc.info, Node: Sysconf Definition, Next: Constants for Sysconf, Up: Sysconf
31.4.1 Definition of `sysconf'
------------------------------
-- Function: long int sysconf (int PARAMETER)
This function is used to inquire about runtime system parameters.
The PARAMETER argument should be one of the `_SC_' symbols listed
below.
The normal return value from `sysconf' is the value you requested.
A value of `-1' is returned both if the implementation does not
impose a limit, and in case of an error.
The following `errno' error conditions are defined for this
function:
`EINVAL'
The value of the PARAMETER is invalid.

File: libc.info, Node: Constants for Sysconf, Next: Examples of Sysconf, Prev: Sysconf Definition, Up: Sysconf
31.4.2 Constants for `sysconf' Parameters
-----------------------------------------
Here are the symbolic constants for use as the PARAMETER argument to
`sysconf'. The values are all integer constants (more specifically,
enumeration type values).
`_SC_ARG_MAX'
Inquire about the parameter corresponding to `ARG_MAX'.
`_SC_CHILD_MAX'
Inquire about the parameter corresponding to `CHILD_MAX'.
`_SC_OPEN_MAX'
Inquire about the parameter corresponding to `OPEN_MAX'.
`_SC_STREAM_MAX'
Inquire about the parameter corresponding to `STREAM_MAX'.
`_SC_TZNAME_MAX'
Inquire about the parameter corresponding to `TZNAME_MAX'.
`_SC_NGROUPS_MAX'
Inquire about the parameter corresponding to `NGROUPS_MAX'.
`_SC_JOB_CONTROL'
Inquire about the parameter corresponding to `_POSIX_JOB_CONTROL'.
`_SC_SAVED_IDS'
Inquire about the parameter corresponding to `_POSIX_SAVED_IDS'.
`_SC_VERSION'
Inquire about the parameter corresponding to `_POSIX_VERSION'.
`_SC_CLK_TCK'
Inquire about the number of clock ticks per second; *note CPU
Time::. The corresponding parameter `CLK_TCK' is obsolete.
`_SC_CHARCLASS_NAME_MAX'
Inquire about the parameter corresponding to maximal length
allowed for a character class name in an extended locale
specification. These extensions are not yet standardized and so
this option is not standardized as well.
`_SC_REALTIME_SIGNALS'
Inquire about the parameter corresponding to
`_POSIX_REALTIME_SIGNALS'.
`_SC_PRIORITY_SCHEDULING'
Inquire about the parameter corresponding to
`_POSIX_PRIORITY_SCHEDULING'.
`_SC_TIMERS'
Inquire about the parameter corresponding to `_POSIX_TIMERS'.
`_SC_ASYNCHRONOUS_IO'
Inquire about the parameter corresponding to
`_POSIX_ASYNCHRONOUS_IO'.
`_SC_PRIORITIZED_IO'
Inquire about the parameter corresponding to
`_POSIX_PRIORITIZED_IO'.
`_SC_SYNCHRONIZED_IO'
Inquire about the parameter corresponding to
`_POSIX_SYNCHRONIZED_IO'.
`_SC_FSYNC'
Inquire about the parameter corresponding to `_POSIX_FSYNC'.
`_SC_MAPPED_FILES'
Inquire about the parameter corresponding to `_POSIX_MAPPED_FILES'.
`_SC_MEMLOCK'
Inquire about the parameter corresponding to `_POSIX_MEMLOCK'.
`_SC_MEMLOCK_RANGE'
Inquire about the parameter corresponding to
`_POSIX_MEMLOCK_RANGE'.
`_SC_MEMORY_PROTECTION'
Inquire about the parameter corresponding to
`_POSIX_MEMORY_PROTECTION'.
`_SC_MESSAGE_PASSING'
Inquire about the parameter corresponding to
`_POSIX_MESSAGE_PASSING'.
`_SC_SEMAPHORES'
Inquire about the parameter corresponding to `_POSIX_SEMAPHORES'.
`_SC_SHARED_MEMORY_OBJECTS'
Inquire about the parameter corresponding to
`_POSIX_SHARED_MEMORY_OBJECTS'.
`_SC_AIO_LISTIO_MAX'
Inquire about the parameter corresponding to
`_POSIX_AIO_LISTIO_MAX'.
`_SC_AIO_MAX'
Inquire about the parameter corresponding to `_POSIX_AIO_MAX'.
`_SC_AIO_PRIO_DELTA_MAX'
Inquire the value by which a process can decrease its asynchronous
I/O priority level from its own scheduling priority. This
corresponds to the run-time invariant value `AIO_PRIO_DELTA_MAX'.
`_SC_DELAYTIMER_MAX'
Inquire about the parameter corresponding to
`_POSIX_DELAYTIMER_MAX'.
`_SC_MQ_OPEN_MAX'
Inquire about the parameter corresponding to `_POSIX_MQ_OPEN_MAX'.
`_SC_MQ_PRIO_MAX'
Inquire about the parameter corresponding to `_POSIX_MQ_PRIO_MAX'.
`_SC_RTSIG_MAX'
Inquire about the parameter corresponding to `_POSIX_RTSIG_MAX'.
`_SC_SEM_NSEMS_MAX'
Inquire about the parameter corresponding to
`_POSIX_SEM_NSEMS_MAX'.
`_SC_SEM_VALUE_MAX'
Inquire about the parameter corresponding to
`_POSIX_SEM_VALUE_MAX'.
`_SC_SIGQUEUE_MAX'
Inquire about the parameter corresponding to `_POSIX_SIGQUEUE_MAX'.
`_SC_TIMER_MAX'
Inquire about the parameter corresponding to `_POSIX_TIMER_MAX'.
`_SC_PII'
Inquire about the parameter corresponding to `_POSIX_PII'.
`_SC_PII_XTI'
Inquire about the parameter corresponding to `_POSIX_PII_XTI'.
`_SC_PII_SOCKET'
Inquire about the parameter corresponding to `_POSIX_PII_SOCKET'.
`_SC_PII_INTERNET'
Inquire about the parameter corresponding to `_POSIX_PII_INTERNET'.
`_SC_PII_OSI'
Inquire about the parameter corresponding to `_POSIX_PII_OSI'.
`_SC_SELECT'
Inquire about the parameter corresponding to `_POSIX_SELECT'.
`_SC_UIO_MAXIOV'
Inquire about the parameter corresponding to `_POSIX_UIO_MAXIOV'.
`_SC_PII_INTERNET_STREAM'
Inquire about the parameter corresponding to
`_POSIX_PII_INTERNET_STREAM'.
`_SC_PII_INTERNET_DGRAM'
Inquire about the parameter corresponding to
`_POSIX_PII_INTERNET_DGRAM'.
`_SC_PII_OSI_COTS'
Inquire about the parameter corresponding to `_POSIX_PII_OSI_COTS'.
`_SC_PII_OSI_CLTS'
Inquire about the parameter corresponding to `_POSIX_PII_OSI_CLTS'.
`_SC_PII_OSI_M'
Inquire about the parameter corresponding to `_POSIX_PII_OSI_M'.
`_SC_T_IOV_MAX'
Inquire the value of the value associated with the `T_IOV_MAX'
variable.
`_SC_THREADS'
Inquire about the parameter corresponding to `_POSIX_THREADS'.
`_SC_THREAD_SAFE_FUNCTIONS'
Inquire about the parameter corresponding to
`_POSIX_THREAD_SAFE_FUNCTIONS'.
`_SC_GETGR_R_SIZE_MAX'
Inquire about the parameter corresponding to
`_POSIX_GETGR_R_SIZE_MAX'.
`_SC_GETPW_R_SIZE_MAX'
Inquire about the parameter corresponding to
`_POSIX_GETPW_R_SIZE_MAX'.
`_SC_LOGIN_NAME_MAX'
Inquire about the parameter corresponding to
`_POSIX_LOGIN_NAME_MAX'.
`_SC_TTY_NAME_MAX'
Inquire about the parameter corresponding to `_POSIX_TTY_NAME_MAX'.
`_SC_THREAD_DESTRUCTOR_ITERATIONS'
Inquire about the parameter corresponding to
`_POSIX_THREAD_DESTRUCTOR_ITERATIONS'.
`_SC_THREAD_KEYS_MAX'
Inquire about the parameter corresponding to
`_POSIX_THREAD_KEYS_MAX'.
`_SC_THREAD_STACK_MIN'
Inquire about the parameter corresponding to
`_POSIX_THREAD_STACK_MIN'.
`_SC_THREAD_THREADS_MAX'
Inquire about the parameter corresponding to
`_POSIX_THREAD_THREADS_MAX'.
`_SC_THREAD_ATTR_STACKADDR'
Inquire about the parameter corresponding to
a `_POSIX_THREAD_ATTR_STACKADDR'.
`_SC_THREAD_ATTR_STACKSIZE'
Inquire about the parameter corresponding to
`_POSIX_THREAD_ATTR_STACKSIZE'.
`_SC_THREAD_PRIORITY_SCHEDULING'
Inquire about the parameter corresponding to
`_POSIX_THREAD_PRIORITY_SCHEDULING'.
`_SC_THREAD_PRIO_INHERIT'
Inquire about the parameter corresponding to
`_POSIX_THREAD_PRIO_INHERIT'.
`_SC_THREAD_PRIO_PROTECT'
Inquire about the parameter corresponding to
`_POSIX_THREAD_PRIO_PROTECT'.
`_SC_THREAD_PROCESS_SHARED'
Inquire about the parameter corresponding to
`_POSIX_THREAD_PROCESS_SHARED'.
`_SC_2_C_DEV'
Inquire about whether the system has the POSIX.2 C compiler
command, `c89'.
`_SC_2_FORT_DEV'
Inquire about whether the system has the POSIX.2 Fortran compiler
command, `fort77'.
`_SC_2_FORT_RUN'
Inquire about whether the system has the POSIX.2 `asa' command to
interpret Fortran carriage control.
`_SC_2_LOCALEDEF'
Inquire about whether the system has the POSIX.2 `localedef'
command.
`_SC_2_SW_DEV'
Inquire about whether the system has the POSIX.2 commands `ar',
`make', and `strip'.
`_SC_BC_BASE_MAX'
Inquire about the maximum value of `obase' in the `bc' utility.
`_SC_BC_DIM_MAX'
Inquire about the maximum size of an array in the `bc' utility.
`_SC_BC_SCALE_MAX'
Inquire about the maximum value of `scale' in the `bc' utility.
`_SC_BC_STRING_MAX'
Inquire about the maximum size of a string constant in the `bc'
utility.
`_SC_COLL_WEIGHTS_MAX'
Inquire about the maximum number of weights that can necessarily
be used in defining the collating sequence for a locale.
`_SC_EXPR_NEST_MAX'
Inquire about the maximum number of expressions nested within
parentheses when using the `expr' utility.
`_SC_LINE_MAX'
Inquire about the maximum size of a text line that the POSIX.2 text
utilities can handle.
`_SC_EQUIV_CLASS_MAX'
Inquire about the maximum number of weights that can be assigned
to an entry of the `LC_COLLATE' category `order' keyword in a
locale definition. The GNU C Library does not presently support
locale definitions.
`_SC_VERSION'
Inquire about the version number of POSIX.1 that the library and
kernel support.
`_SC_2_VERSION'
Inquire about the version number of POSIX.2 that the system
utilities support.
`_SC_PAGESIZE'
Inquire about the virtual memory page size of the machine.
`getpagesize' returns the same value (*note Query Memory
Parameters::).
`_SC_NPROCESSORS_CONF'
Inquire about the number of configured processors.
`_SC_NPROCESSORS_ONLN'
Inquire about the number of processors online.
`_SC_PHYS_PAGES'
Inquire about the number of physical pages in the system.
`_SC_AVPHYS_PAGES'
Inquire about the number of available physical pages in the system.
`_SC_ATEXIT_MAX'
Inquire about the number of functions which can be registered as
termination functions for `atexit'; *note Cleanups on Exit::.
`_SC_XOPEN_VERSION'
Inquire about the parameter corresponding to `_XOPEN_VERSION'.
`_SC_XOPEN_XCU_VERSION'
Inquire about the parameter corresponding to `_XOPEN_XCU_VERSION'.
`_SC_XOPEN_UNIX'
Inquire about the parameter corresponding to `_XOPEN_UNIX'.
`_SC_XOPEN_REALTIME'
Inquire about the parameter corresponding to `_XOPEN_REALTIME'.
`_SC_XOPEN_REALTIME_THREADS'
Inquire about the parameter corresponding to
`_XOPEN_REALTIME_THREADS'.
`_SC_XOPEN_LEGACY'
Inquire about the parameter corresponding to `_XOPEN_LEGACY'.
`_SC_XOPEN_CRYPT'
Inquire about the parameter corresponding to `_XOPEN_CRYPT'.
`_SC_XOPEN_ENH_I18N'
Inquire about the parameter corresponding to `_XOPEN_ENH_I18N'.
`_SC_XOPEN_SHM'
Inquire about the parameter corresponding to `_XOPEN_SHM'.
`_SC_XOPEN_XPG2'
Inquire about the parameter corresponding to `_XOPEN_XPG2'.
`_SC_XOPEN_XPG3'
Inquire about the parameter corresponding to `_XOPEN_XPG3'.
`_SC_XOPEN_XPG4'
Inquire about the parameter corresponding to `_XOPEN_XPG4'.
`_SC_CHAR_BIT'
Inquire about the number of bits in a variable of type `char'.
`_SC_CHAR_MAX'
Inquire about the maximum value which can be stored in a variable
of type `char'.
`_SC_CHAR_MIN'
Inquire about the minimum value which can be stored in a variable
of type `char'.
`_SC_INT_MAX'
Inquire about the maximum value which can be stored in a variable
of type `int'.
`_SC_INT_MIN'
Inquire about the minimum value which can be stored in a variable
of type `int'.
`_SC_LONG_BIT'
Inquire about the number of bits in a variable of type `long int'.
`_SC_WORD_BIT'
Inquire about the number of bits in a variable of a register word.
`_SC_MB_LEN_MAX'
Inquire the maximum length of a multi-byte representation of a wide
character value.
`_SC_NZERO'
Inquire about the value used to internally represent the zero
priority level for the process execution.
`SC_SSIZE_MAX'
Inquire about the maximum value which can be stored in a variable
of type `ssize_t'.
`_SC_SCHAR_MAX'
Inquire about the maximum value which can be stored in a variable
of type `signed char'.
`_SC_SCHAR_MIN'
Inquire about the minimum value which can be stored in a variable
of type `signed char'.
`_SC_SHRT_MAX'
Inquire about the maximum value which can be stored in a variable
of type `short int'.
`_SC_SHRT_MIN'
Inquire about the minimum value which can be stored in a variable
of type `short int'.
`_SC_UCHAR_MAX'
Inquire about the maximum value which can be stored in a variable
of type `unsigned char'.
`_SC_UINT_MAX'
Inquire about the maximum value which can be stored in a variable
of type `unsigned int'.
`_SC_ULONG_MAX'
Inquire about the maximum value which can be stored in a variable
of type `unsigned long int'.
`_SC_USHRT_MAX'
Inquire about the maximum value which can be stored in a variable
of type `unsigned short int'.
`_SC_NL_ARGMAX'
Inquire about the parameter corresponding to `NL_ARGMAX'.
`_SC_NL_LANGMAX'
Inquire about the parameter corresponding to `NL_LANGMAX'.
`_SC_NL_MSGMAX'
Inquire about the parameter corresponding to `NL_MSGMAX'.
`_SC_NL_NMAX'
Inquire about the parameter corresponding to `NL_NMAX'.
`_SC_NL_SETMAX'
Inquire about the parameter corresponding to `NL_SETMAX'.
`_SC_NL_TEXTMAX'
Inquire about the parameter corresponding to `NL_TEXTMAX'.

File: libc.info, Node: Examples of Sysconf, Prev: Constants for Sysconf, Up: Sysconf
31.4.3 Examples of `sysconf'
----------------------------
We recommend that you first test for a macro definition for the
parameter you are interested in, and call `sysconf' only if the macro
is not defined. For example, here is how to test whether job control
is supported:
int
have_job_control (void)
{
#ifdef _POSIX_JOB_CONTROL
return 1;
#else
int value = sysconf (_SC_JOB_CONTROL);
if (value < 0)
/* If the system is that badly wedged,
there's no use trying to go on. */
fatal (strerror (errno));
return value;
#endif
}
Here is how to get the value of a numeric limit:
int
get_child_max ()
{
#ifdef CHILD_MAX
return CHILD_MAX;
#else
int value = sysconf (_SC_CHILD_MAX);
if (value < 0)
fatal (strerror (errno));
return value;
#endif
}

File: libc.info, Node: Minimums, Next: Limits for Files, Prev: Sysconf, Up: System Configuration
31.5 Minimum Values for General Capacity Limits
===============================================
Here are the names for the POSIX minimum upper bounds for the system
limit parameters. The significance of these values is that you can
safely push to these limits without checking whether the particular
system you are using can go that far.
`_POSIX_AIO_LISTIO_MAX'
The most restrictive limit permitted by POSIX for the maximum
number of I/O operations that can be specified in a list I/O call.
The value of this constant is `2'; thus you can add up to two new
entries of the list of outstanding operations.
`_POSIX_AIO_MAX'
The most restrictive limit permitted by POSIX for the maximum
number of outstanding asynchronous I/O operations. The value of
this constant is `1'. So you cannot expect that you can issue
more than one operation and immediately continue with the normal
work, receiving the notifications asynchronously.
`_POSIX_ARG_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum combined length of the ARGV and ENVIRON
arguments that can be passed to the `exec' functions. Its value
is `4096'.
`_POSIX_CHILD_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum number of simultaneous processes per real
user ID. Its value is `6'.
`_POSIX_NGROUPS_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum number of supplementary group IDs per
process. Its value is `0'.
`_POSIX_OPEN_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum number of files that a single process can
have open simultaneously. Its value is `16'.
`_POSIX_SSIZE_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum value that can be stored in an object of type
`ssize_t'. Its value is `32767'.
`_POSIX_STREAM_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum number of streams that a single process can
have open simultaneously. Its value is `8'.
`_POSIX_TZNAME_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the maximum length of a time zone name. Its value is
`3'.
`_POSIX2_RE_DUP_MAX'
The value of this macro is the most restrictive limit permitted by
POSIX for the numbers used in the `\{MIN,MAX\}' construct in a
regular expression. Its value is `255'.

File: libc.info, Node: Limits for Files, Next: Options for Files, Prev: Minimums, Up: System Configuration
31.6 Limits on File System Capacity
===================================
The POSIX.1 standard specifies a number of parameters that describe the
limitations of the file system. It's possible for the system to have a
fixed, uniform limit for a parameter, but this isn't the usual case. On
most systems, it's possible for different file systems (and, for some
parameters, even different files) to have different maximum limits. For
example, this is very likely if you use NFS to mount some of the file
systems from other machines.
Each of the following macros is defined in `limits.h' only if the
system has a fixed, uniform limit for the parameter in question. If the
system allows different file systems or files to have different limits,
then the macro is undefined; use `pathconf' or `fpathconf' to find out
the limit that applies to a particular file. *Note Pathconf::.
Each parameter also has another macro, with a name starting with
`_POSIX', which gives the lowest value that the limit is allowed to
have on _any_ POSIX system. *Note File Minimums::.
-- Macro: int LINK_MAX
The uniform system limit (if any) for the number of names for a
given file. *Note Hard Links::.
-- Macro: int MAX_CANON
The uniform system limit (if any) for the amount of text in a line
of input when input editing is enabled. *Note Canonical or Not::.
-- Macro: int MAX_INPUT
The uniform system limit (if any) for the total number of
characters typed ahead as input. *Note I/O Queues::.
-- Macro: int NAME_MAX
The uniform system limit (if any) for the length of a file name
component, not including the terminating null character.
*Portability Note:* On some systems, the GNU C Library defines
`NAME_MAX', but does not actually enforce this limit.
-- Macro: int PATH_MAX
The uniform system limit (if any) for the length of an entire file
name (that is, the argument given to system calls such as `open'),
including the terminating null character.
*Portability Note:* The GNU C Library does not enforce this limit
even if `PATH_MAX' is defined.
-- Macro: int PIPE_BUF
The uniform system limit (if any) for the number of bytes that can
be written atomically to a pipe. If multiple processes are
writing to the same pipe simultaneously, output from different
processes might be interleaved in chunks of this size. *Note
Pipes and FIFOs::.
These are alternative macro names for some of the same information.
-- Macro: int MAXNAMLEN
This is the BSD name for `NAME_MAX'. It is defined in `dirent.h'.
-- Macro: int FILENAME_MAX
The value of this macro is an integer constant expression that
represents the maximum length of a file name string. It is
defined in `stdio.h'.
Unlike `PATH_MAX', this macro is defined even if there is no actual
limit imposed. In such a case, its value is typically a very large
number. *This is always the case on GNU/Hurd systems.*
*Usage Note:* Don't use `FILENAME_MAX' as the size of an array in
which to store a file name! You can't possibly make an array that
big! Use dynamic allocation (*note Memory Allocation::) instead.

File: libc.info, Node: Options for Files, Next: File Minimums, Prev: Limits for Files, Up: System Configuration
31.7 Optional Features in File Support
======================================
POSIX defines certain system-specific options in the system calls for
operating on files. Some systems support these options and others do
not. Since these options are provided in the kernel, not in the
library, simply using the GNU C Library does not guarantee that any of
these features is supported; it depends on the system you are using.
They can also vary between file systems on a single machine.
This section describes the macros you can test to determine whether a
particular option is supported on your machine. If a given macro is
defined in `unistd.h', then its value says whether the corresponding
feature is supported. (A value of `-1' indicates no; any other value
indicates yes.) If the macro is undefined, it means particular files
may or may not support the feature.
Since all the machines that support the GNU C Library also support
NFS, one can never make a general statement about whether all file
systems support the `_POSIX_CHOWN_RESTRICTED' and `_POSIX_NO_TRUNC'
features. So these names are never defined as macros in the GNU C
Library.
-- Macro: int _POSIX_CHOWN_RESTRICTED
If this option is in effect, the `chown' function is restricted so
that the only changes permitted to nonprivileged processes is to
change the group owner of a file to either be the effective group
ID of the process, or one of its supplementary group IDs. *Note
File Owner::.
-- Macro: int _POSIX_NO_TRUNC
If this option is in effect, file name components longer than
`NAME_MAX' generate an `ENAMETOOLONG' error. Otherwise, file name
components that are too long are silently truncated.
-- Macro: unsigned char _POSIX_VDISABLE
This option is only meaningful for files that are terminal devices.
If it is enabled, then handling for special control characters can
be disabled individually. *Note Special Characters::.
If one of these macros is undefined, that means that the option
might be in effect for some files and not for others. To inquire about
a particular file, call `pathconf' or `fpathconf'. *Note Pathconf::.

File: libc.info, Node: File Minimums, Next: Pathconf, Prev: Options for Files, Up: System Configuration
31.8 Minimum Values for File System Limits
==========================================
Here are the names for the POSIX minimum upper bounds for some of the
above parameters. The significance of these values is that you can
safely push to these limits without checking whether the particular
system you are using can go that far. In most cases GNU systems do not
have these strict limitations. The actual limit should be requested if
necessary.
`_POSIX_LINK_MAX'
The most restrictive limit permitted by POSIX for the maximum
value of a file's link count. The value of this constant is `8';
thus, you can always make up to eight names for a file without
running into a system limit.
`_POSIX_MAX_CANON'
The most restrictive limit permitted by POSIX for the maximum
number of bytes in a canonical input line from a terminal device.
The value of this constant is `255'.
`_POSIX_MAX_INPUT'
The most restrictive limit permitted by POSIX for the maximum
number of bytes in a terminal device input queue (or typeahead
buffer). *Note Input Modes::. The value of this constant is
`255'.
`_POSIX_NAME_MAX'
The most restrictive limit permitted by POSIX for the maximum
number of bytes in a file name component. The value of this
constant is `14'.
`_POSIX_PATH_MAX'
The most restrictive limit permitted by POSIX for the maximum
number of bytes in a file name. The value of this constant is
`256'.
`_POSIX_PIPE_BUF'
The most restrictive limit permitted by POSIX for the maximum
number of bytes that can be written atomically to a pipe. The
value of this constant is `512'.
`SYMLINK_MAX'
Maximum number of bytes in a symbolic link.
`POSIX_REC_INCR_XFER_SIZE'
Recommended increment for file transfer sizes between the
`POSIX_REC_MIN_XFER_SIZE' and `POSIX_REC_MAX_XFER_SIZE' values.
`POSIX_REC_MAX_XFER_SIZE'
Maximum recommended file transfer size.
`POSIX_REC_MIN_XFER_SIZE'
Minimum recommended file transfer size.
`POSIX_REC_XFER_ALIGN'
Recommended file transfer buffer alignment.

File: libc.info, Node: Pathconf, Next: Utility Limits, Prev: File Minimums, Up: System Configuration
31.9 Using `pathconf'
=====================
When your machine allows different files to have different values for a
file system parameter, you can use the functions in this section to find
out the value that applies to any particular file.
These functions and the associated constants for the PARAMETER
argument are declared in the header file `unistd.h'.
-- Function: long int pathconf (const char *FILENAME, int PARAMETER)
This function is used to inquire about the limits that apply to
the file named FILENAME.
The PARAMETER argument should be one of the `_PC_' constants
listed below.
The normal return value from `pathconf' is the value you requested.
A value of `-1' is returned both if the implementation does not
impose a limit, and in case of an error. In the former case,
`errno' is not set, while in the latter case, `errno' is set to
indicate the cause of the problem. So the only way to use this
function robustly is to store `0' into `errno' just before calling
it.
Besides the usual file name errors (*note File Name Errors::), the
following error condition is defined for this function:
`EINVAL'
The value of PARAMETER is invalid, or the implementation
doesn't support the PARAMETER for the specific file.
-- Function: long int fpathconf (int FILEDES, int PARAMETER)
This is just like `pathconf' except that an open file descriptor
is used to specify the file for which information is requested,
instead of a file name.
The following `errno' error conditions are defined for this
function:
`EBADF'
The FILEDES argument is not a valid file descriptor.
`EINVAL'
The value of PARAMETER is invalid, or the implementation
doesn't support the PARAMETER for the specific file.
Here are the symbolic constants that you can use as the PARAMETER
argument to `pathconf' and `fpathconf'. The values are all integer
constants.
`_PC_LINK_MAX'
Inquire about the value of `LINK_MAX'.
`_PC_MAX_CANON'
Inquire about the value of `MAX_CANON'.
`_PC_MAX_INPUT'
Inquire about the value of `MAX_INPUT'.
`_PC_NAME_MAX'
Inquire about the value of `NAME_MAX'.
`_PC_PATH_MAX'
Inquire about the value of `PATH_MAX'.
`_PC_PIPE_BUF'
Inquire about the value of `PIPE_BUF'.
`_PC_CHOWN_RESTRICTED'
Inquire about the value of `_POSIX_CHOWN_RESTRICTED'.
`_PC_NO_TRUNC'
Inquire about the value of `_POSIX_NO_TRUNC'.
`_PC_VDISABLE'
Inquire about the value of `_POSIX_VDISABLE'.
`_PC_SYNC_IO'
Inquire about the value of `_POSIX_SYNC_IO'.
`_PC_ASYNC_IO'
Inquire about the value of `_POSIX_ASYNC_IO'.
`_PC_PRIO_IO'
Inquire about the value of `_POSIX_PRIO_IO'.
`_PC_FILESIZEBITS'
Inquire about the availability of large files on the filesystem.
`_PC_REC_INCR_XFER_SIZE'
Inquire about the value of `POSIX_REC_INCR_XFER_SIZE'.
`_PC_REC_MAX_XFER_SIZE'
Inquire about the value of `POSIX_REC_MAX_XFER_SIZE'.
`_PC_REC_MIN_XFER_SIZE'
Inquire about the value of `POSIX_REC_MIN_XFER_SIZE'.
`_PC_REC_XFER_ALIGN'
Inquire about the value of `POSIX_REC_XFER_ALIGN'.
*Portability Note:* On some systems, the GNU C Library does not
enforce `_PC_NAME_MAX' or `_PC_PATH_MAX' limits.

File: libc.info, Node: Utility Limits, Next: Utility Minimums, Prev: Pathconf, Up: System Configuration
31.10 Utility Program Capacity Limits
=====================================
The POSIX.2 standard specifies certain system limits that you can access
through `sysconf' that apply to utility behavior rather than the
behavior of the library or the operating system.
The GNU C Library defines macros for these limits, and `sysconf'
returns values for them if you ask; but these values convey no
meaningful information. They are simply the smallest values that
POSIX.2 permits.
-- Macro: int BC_BASE_MAX
The largest value of `obase' that the `bc' utility is guaranteed
to support.
-- Macro: int BC_DIM_MAX
The largest number of elements in one array that the `bc' utility
is guaranteed to support.
-- Macro: int BC_SCALE_MAX
The largest value of `scale' that the `bc' utility is guaranteed
to support.
-- Macro: int BC_STRING_MAX
The largest number of characters in one string constant that the
`bc' utility is guaranteed to support.
-- Macro: int COLL_WEIGHTS_MAX
The largest number of weights that can necessarily be used in
defining the collating sequence for a locale.
-- Macro: int EXPR_NEST_MAX
The maximum number of expressions that can be nested within
parenthesis by the `expr' utility.
-- Macro: int LINE_MAX
The largest text line that the text-oriented POSIX.2 utilities can
support. (If you are using the GNU versions of these utilities,
then there is no actual limit except that imposed by the available
virtual memory, but there is no way that the library can tell you
this.)
-- Macro: int EQUIV_CLASS_MAX
The maximum number of weights that can be assigned to an entry of
the `LC_COLLATE' category `order' keyword in a locale definition.
The GNU C Library does not presently support locale definitions.

File: libc.info, Node: Utility Minimums, Next: String Parameters, Prev: Utility Limits, Up: System Configuration
31.11 Minimum Values for Utility Limits
=======================================
`_POSIX2_BC_BASE_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
value of `obase' in the `bc' utility. Its value is `99'.
`_POSIX2_BC_DIM_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
size of an array in the `bc' utility. Its value is `2048'.
`_POSIX2_BC_SCALE_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
value of `scale' in the `bc' utility. Its value is `99'.
`_POSIX2_BC_STRING_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
size of a string constant in the `bc' utility. Its value is
`1000'.
`_POSIX2_COLL_WEIGHTS_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
number of weights that can necessarily be used in defining the
collating sequence for a locale. Its value is `2'.
`_POSIX2_EXPR_NEST_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
number of expressions nested within parenthesis when using the
`expr' utility. Its value is `32'.
`_POSIX2_LINE_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
size of a text line that the text utilities can handle. Its value
is `2048'.
`_POSIX2_EQUIV_CLASS_MAX'
The most restrictive limit permitted by POSIX.2 for the maximum
number of weights that can be assigned to an entry of the
`LC_COLLATE' category `order' keyword in a locale definition. Its
value is `2'. The GNU C Library does not presently support locale
definitions.

File: libc.info, Node: String Parameters, Prev: Utility Minimums, Up: System Configuration
31.12 String-Valued Parameters
==============================
POSIX.2 defines a way to get string-valued parameters from the operating
system with the function `confstr':
-- Function: size_t confstr (int PARAMETER, char *BUF, size_t LEN)
This function reads the value of a string-valued system parameter,
storing the string into LEN bytes of memory space starting at BUF.
The PARAMETER argument should be one of the `_CS_' symbols listed
below.
The normal return value from `confstr' is the length of the string
value that you asked for. If you supply a null pointer for BUF,
then `confstr' does not try to store the string; it just returns
its length. A value of `0' indicates an error.
If the string you asked for is too long for the buffer (that is,
longer than `LEN - 1'), then `confstr' stores just that much
(leaving room for the terminating null character). You can tell
that this has happened because `confstr' returns a value greater
than or equal to LEN.
The following `errno' error conditions are defined for this
function:
`EINVAL'
The value of the PARAMETER is invalid.
Currently there is just one parameter you can read with `confstr':
`_CS_PATH'
This parameter's value is the recommended default path for
searching for executable files. This is the path that a user has
by default just after logging in.
`_CS_LFS_CFLAGS'
The returned string specifies which additional flags must be given
to the C compiler if a source is compiled using the
`_LARGEFILE_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS_LDFLAGS'
The returned string specifies which additional flags must be given
to the linker if a source is compiled using the
`_LARGEFILE_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS_LIBS'
The returned string specifies which additional libraries must be
linked to the application if a source is compiled using the
`_LARGEFILE_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS_LINTFLAGS'
The returned string specifies which additional flags must be given
to the lint tool if a source is compiled using the
`_LARGEFILE_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS64_CFLAGS'
The returned string specifies which additional flags must be given
to the C compiler if a source is compiled using the
`_LARGEFILE64_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS64_LDFLAGS'
The returned string specifies which additional flags must be given
to the linker if a source is compiled using the
`_LARGEFILE64_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS64_LIBS'
The returned string specifies which additional libraries must be
linked to the application if a source is compiled using the
`_LARGEFILE64_SOURCE' feature select macro; *note Feature Test
Macros::.
`_CS_LFS64_LINTFLAGS'
The returned string specifies which additional flags must be given
to the lint tool if a source is compiled using the
`_LARGEFILE64_SOURCE' feature select macro; *note Feature Test
Macros::.
The way to use `confstr' without any arbitrary limit on string size
is to call it twice: first call it to get the length, allocate the
buffer accordingly, and then call `confstr' again to fill the buffer,
like this:
char *
get_default_path (void)
{
size_t len = confstr (_CS_PATH, NULL, 0);
char *buffer = (char *) xmalloc (len);
if (confstr (_CS_PATH, buf, len + 1) == 0)
{
free (buffer);
return NULL;
}
return buffer;
}

File: libc.info, Node: Cryptographic Functions, Next: Debugging Support, Prev: System Configuration, Up: Top
32 DES Encryption and Password Handling
***************************************
On many systems, it is unnecessary to have any kind of user
authentication; for instance, a workstation which is not connected to a
network probably does not need any user authentication, because to use
the machine an intruder must have physical access.
Sometimes, however, it is necessary to be sure that a user is
authorized to use some service a machine provides--for instance, to log
in as a particular user id (*note Users and Groups::). One traditional
way of doing this is for each user to choose a secret "password"; then,
the system can ask someone claiming to be a user what the user's
password is, and if the person gives the correct password then the
system can grant the appropriate privileges.
If all the passwords are just stored in a file somewhere, then this
file has to be very carefully protected. To avoid this, passwords are
run through a "one-way function", a function which makes it difficult to
work out what its input was by looking at its output, before storing in
the file.
The GNU C Library provides a one-way function that is compatible with
the behavior of the `crypt' function introduced in FreeBSD 2.0. It
supports two one-way algorithms: one based on the MD5 message-digest
algorithm that is compatible with modern BSD systems, and the other
based on the Data Encryption Standard (DES) that is compatible with
Unix systems.
It also provides support for Secure RPC, and some library functions
that can be used to perform normal DES encryption.
* Menu:
* Legal Problems:: This software can get you locked up, or worse.
* getpass:: Prompting the user for a password.
* crypt:: A one-way function for passwords.
* DES Encryption:: Routines for DES encryption.

File: libc.info, Node: Legal Problems, Next: getpass, Up: Cryptographic Functions
32.1 Legal Problems
===================
Because of the continuously changing state of the law, it's not possible
to provide a definitive survey of the laws affecting cryptography.
Instead, this section warns you of some of the known trouble spots; this
may help you when you try to find out what the laws of your country are.
Some countries require that you have a licence to use, possess, or
import cryptography. These countries are believed to include
Byelorussia, Burma, India, Indonesia, Israel, Kazakhstan, Pakistan,
Russia, and Saudi Arabia.
Some countries restrict the transmission of encrypted messages by
radio; some telecommunications carriers restrict the transmission of
encrypted messages over their network.
Many countries have some form of export control for encryption
software. The Wassenaar Arrangement is a multilateral agreement
between 33 countries (Argentina, Australia, Austria, Belgium, Bulgaria,
Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Ireland, Italy, Japan, Luxembourg, the Netherlands, New
Zealand, Norway, Poland, Portugal, the Republic of Korea, Romania, the
Russian Federation, the Slovak Republic, Spain, Sweden, Switzerland,
Turkey, Ukraine, the United Kingdom and the United States) which
restricts some kinds of encryption exports. Different countries apply
the arrangement in different ways; some do not allow the exception for
certain kinds of "public domain" software (which would include this
library), some only restrict the export of software in tangible form,
and others impose significant additional restrictions.
The United States has additional rules. This software would
generally be exportable under 15 CFR 740.13(e), which permits exports of
"encryption source code" which is "publicly available" and which is
"not subject to an express agreement for the payment of a licensing fee
or royalty for commercial production or sale of any product developed
with the source code" to most countries.
The rules in this area are continuously changing. If you know of any
information in this manual that is out-of-date, please report it to the
bug database. *Note Reporting Bugs::.

File: libc.info, Node: getpass, Next: crypt, Prev: Legal Problems, Up: Cryptographic Functions
32.2 Reading Passwords
======================
When reading in a password, it is desirable to avoid displaying it on
the screen, to help keep it secret. The following function handles this
in a convenient way.
-- Function: char * getpass (const char *PROMPT)
`getpass' outputs PROMPT, then reads a string in from the terminal
without echoing it. It tries to connect to the real terminal,
`/dev/tty', if possible, to encourage users not to put plaintext
passwords in files; otherwise, it uses `stdin' and `stderr'.
`getpass' also disables the INTR, QUIT, and SUSP characters on the
terminal using the `ISIG' terminal attribute (*note Local Modes::).
The terminal is flushed before and after `getpass', so that
characters of a mistyped password are not accidentally visible.
In other C libraries, `getpass' may only return the first
`PASS_MAX' bytes of a password. The GNU C Library has no limit, so
`PASS_MAX' is undefined.
The prototype for this function is in `unistd.h'. `PASS_MAX'
would be defined in `limits.h'.
This precise set of operations may not suit all possible situations.
In this case, it is recommended that users write their own `getpass'
substitute. For instance, a very simple substitute is as follows:
#include <termios.h>
#include <stdio.h>
ssize_t
my_getpass (char **lineptr, size_t *n, FILE *stream)
{
struct termios old, new;
int nread;
/* Turn echoing off and fail if we can't. */
if (tcgetattr (fileno (stream), &old) != 0)
return -1;
new = old;
new.c_lflag &= ~ECHO;
if (tcsetattr (fileno (stream), TCSAFLUSH, &new) != 0)
return -1;
/* Read the password. */
nread = getline (lineptr, n, stream);
/* Restore terminal. */
(void) tcsetattr (fileno (stream), TCSAFLUSH, &old);
return nread;
}
The substitute takes the same parameters as `getline' (*note Line
Input::); the user must print any prompt desired.