drivers/net/wireless/wl12xx/wl1271_boot.c - kernel/skids - Git at Google

 /*
  * This file is part of wl1271
  *
  * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  * 02110-1301 USA
  *
  */

 #include <linux/gpio.h>
 #include <linux/slab.h>

 #include "wl1271_acx.h"
 #include "wl1271_reg.h"
 #include "wl1271_boot.h"
 #include "wl1271_io.h"
 #include "wl1271_event.h"

 static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
 	[PART_DOWN] = {
 		.mem = {
 			.start = 0x00000000,
 			.size  = 0x000177c0
 		},
 		.reg = {
 			.start = REGISTERS_BASE,
 			.size  = 0x00008800
 		},
 		.mem2 = {
 			.start = 0x00000000,
 			.size  = 0x00000000
 		},
 		.mem3 = {
 			.start = 0x00000000,
 			.size  = 0x00000000
 		},
 	},

 	[PART_WORK] = {
 		.mem = {
 			.start = 0x00040000,
 			.size  = 0x00014fc0
 		},
 		.reg = {
 			.start = REGISTERS_BASE,
 			.size  = 0x0000a000
 		},
 		.mem2 = {
 			.start = 0x003004f8,
 			.size  = 0x00000004
 		},
 		.mem3 = {
 			.start = 0x00040404,
 			.size  = 0x00000000
 		},
 	},

 	[PART_DRPW] = {
 		.mem = {
 			.start = 0x00040000,
 			.size  = 0x00014fc0
 		},
 		.reg = {
 			.start = DRPW_BASE,
 			.size  = 0x00006000
 		},
 		.mem2 = {
 			.start = 0x00000000,
 			.size  = 0x00000000
 		},
 		.mem3 = {
 			.start = 0x00000000,
 			.size  = 0x00000000
 		}
 	}
 };

 static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 {
 	u32 cpu_ctrl;

 	/* 10.5.0 run the firmware (I) */
 	cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);

 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
 	wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
 }

 static void wl1271_boot_fw_version(struct wl1271 *wl)
 {
 	struct wl1271_static_data static_data;

 	wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
 		    false);

 	strncpy(wl->chip.fw_ver, static_data.fw_version,
 		sizeof(wl->chip.fw_ver));

 	/* make sure the string is NULL-terminated */
 	wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0';
 }

 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 					     size_t fw_data_len, u32 dest)
 {
 	struct wl1271_partition_set partition;
 	int addr, chunk_num, partition_limit;
 	u8 *p, *chunk;

 	/* whal_FwCtrl_LoadFwImageSm() */

 	wl1271_debug(DEBUG_BOOT, "starting firmware upload");

 	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
 		     fw_data_len, CHUNK_SIZE);

 	if ((fw_data_len % 4) != 0) {
 		wl1271_error("firmware length not multiple of four");
 		return -EIO;
 	}

 	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
 	if (!chunk) {
 		wl1271_error("allocation for firmware upload chunk failed");
 		return -ENOMEM;
 	}

 	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
 	partition.mem.start = dest;
 	wl1271_set_partition(wl, &partition);

 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
 	partition_limit = part_table[PART_DOWN].mem.size;

 	while (chunk_num < fw_data_len / CHUNK_SIZE) {
 		/* 10.2 update partition, if needed */
 		addr = dest + (chunk_num + 2) * CHUNK_SIZE;
 		if (addr > partition_limit) {
 			addr = dest + chunk_num * CHUNK_SIZE;
 			partition_limit = chunk_num * CHUNK_SIZE +
 				part_table[PART_DOWN].mem.size;
 			partition.mem.start = addr;
 			wl1271_set_partition(wl, &partition);
 		}

 		/* 10.3 upload the chunk */
 		addr = dest + chunk_num * CHUNK_SIZE;
 		p = buf + chunk_num * CHUNK_SIZE;
 		memcpy(chunk, p, CHUNK_SIZE);
 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
 		wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);

 		chunk_num++;
 	}

 	/* 10.4 upload the last chunk */
 	addr = dest + chunk_num * CHUNK_SIZE;
 	p = buf + chunk_num * CHUNK_SIZE;
 	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
 		     fw_data_len % CHUNK_SIZE, p, addr);
 	wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);

 	kfree(chunk);
 	return 0;
 }

 static int wl1271_boot_upload_firmware(struct wl1271 *wl)
 {
 	u32 chunks, addr, len;
 	int ret = 0;
 	u8 *fw;

 	fw = wl->fw;
 	chunks = be32_to_cpup((__be32 *) fw);
 	fw += sizeof(u32);

 	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);

 	while (chunks--) {
 		addr = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);
 		len = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);

 		if (len > 300000) {
 			wl1271_info("firmware chunk too long: %u", len);
 			return -EINVAL;
 		}
 		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
 			     chunks, addr, len);
 		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
 		if (ret != 0)
 			break;
 		fw += len;
 	}

 	return ret;
 }

 static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 {
 	size_t nvs_len, burst_len;
 	int i;
 	u32 dest_addr, val;
 	u8 *nvs_ptr, *nvs_aligned;

 	if (wl->nvs == NULL)
 		return -ENODEV;

 	/* only the first part of the NVS needs to be uploaded */
 	nvs_len = sizeof(wl->nvs->nvs);
 	nvs_ptr = (u8 *)wl->nvs->nvs;

 	/* update current MAC address to NVS */
 	nvs_ptr[11] = wl->mac_addr[0];
 	nvs_ptr[10] = wl->mac_addr[1];
 	nvs_ptr[6] = wl->mac_addr[2];
 	nvs_ptr[5] = wl->mac_addr[3];
 	nvs_ptr[4] = wl->mac_addr[4];
 	nvs_ptr[3] = wl->mac_addr[5];

 	/*
 	 * Layout before the actual NVS tables:
 	 * 1 byte : burst length.
 	 * 2 bytes: destination address.
 	 * n bytes: data to burst copy.
 	 *
 	 * This is ended by a 0 length, then the NVS tables.
 	 */

 	/* FIXME: Do we need to check here whether the LSB is 1? */
 	while (nvs_ptr[0]) {
 		burst_len = nvs_ptr[0];
 		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));

 		/* FIXME: Due to our new wl1271_translate_reg_addr function,
 		   we need to add the REGISTER_BASE to the destination */
 		dest_addr += REGISTERS_BASE;

 		/* We move our pointer to the data */
 		nvs_ptr += 3;

 		for (i = 0; i < burst_len; i++) {
 			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
 			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));

 			wl1271_debug(DEBUG_BOOT,
 				     "nvs burst write 0x%x: 0x%x",
 				     dest_addr, val);
 			wl1271_write32(wl, dest_addr, val);

 			nvs_ptr += 4;
 			dest_addr += 4;
 		}
 	}

 	/*
 	 * We've reached the first zero length, the first NVS table
 	 * is 7 bytes further.
 	 */
 	nvs_ptr += 7;
 	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
 	nvs_len = ALIGN(nvs_len, 4);

 	/* FIXME: The driver sets the partition here, but this is not needed,
 	   since it sets to the same one as currently in use */
 	/* Now we must set the partition correctly */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);

 	/* Copy the NVS tables to a new block to ensure alignment */
 	/* FIXME: We jump 3 more bytes before uploading the NVS.  It seems
 	that our NVS files have three extra zeros here.  I'm not sure whether
 	the problem is in our NVS generation or we should really jumpt these
 	3 bytes here */
 	nvs_ptr += 3;

 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); if
 	(!nvs_aligned) return -ENOMEM;

 	/* And finally we upload the NVS tables */
 	/* FIXME: In wl1271, we upload everything at once.
 	   No endianness handling needed here?! The ref driver doesn't do
 	   anything about it at this point */
 	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);

 	kfree(nvs_aligned);
 	return 0;
 }

 static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
 {
 	wl1271_enable_interrupts(wl);
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
 		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
 	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
 }

 static int wl1271_boot_soft_reset(struct wl1271 *wl)
 {
 	unsigned long timeout;
 	u32 boot_data;

 	/* perform soft reset */
 	wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);

 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
 		boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
 		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;

 		if (time_after(jiffies, timeout)) {
 			/* 1.2 check pWhalBus->uSelfClearTime if the
 			 * timeout was reached */
 			wl1271_error("soft reset timeout");
 			return -1;
 		}

 		udelay(SOFT_RESET_STALL_TIME);
 	}

 	/* disable Rx/Tx */
 	wl1271_write32(wl, ENABLE, 0x0);

 	/* disable auto calibration on start*/
 	wl1271_write32(wl, SPARE_A2, 0xffff);

 	return 0;
 }

 static int wl1271_boot_run_firmware(struct wl1271 *wl)
 {
 	int loop, ret;
 	u32 chip_id, intr;

 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);

 	chip_id = wl1271_read32(wl, CHIP_ID_B);

 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);

 	if (chip_id != wl->chip.id) {
 		wl1271_error("chip id doesn't match after firmware boot");
 		return -EIO;
 	}

 	/* wait for init to complete */
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
 		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);

 		if (intr == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
 				     "init indication");
 			return -EIO;
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
 			wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
 				       WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
 		}
 	}

 	if (loop > INIT_LOOP) {
 		wl1271_error("timeout waiting for the hardware to "
 			     "complete initialization");
 		return -EIO;
 	}

 	/* get hardware config command mail box */
 	wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);

 	/* get hardware config event mail box */
 	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);

 	/* set the working partition to its "running" mode offset */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);

 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
 		     wl->cmd_box_addr, wl->event_box_addr);

 	wl1271_boot_fw_version(wl);

 	/*
 	 * in case of full asynchronous mode the firmware event must be
 	 * ready to receive event from the command mailbox
 	 */

 	/* unmask required mbox events  */
 	wl->event_mask = BSS_LOSE_EVENT_ID |
 		SCAN_COMPLETE_EVENT_ID |
 		PS_REPORT_EVENT_ID |
 		JOIN_EVENT_COMPLETE_ID |
 		DISCONNECT_EVENT_COMPLETE_ID |
 		RSSI_SNR_TRIGGER_0_EVENT_ID;

 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
 		wl1271_error("EVENT mask setting failed");
 		return ret;
 	}

 	wl1271_event_mbox_config(wl);

 	/* firmware startup completed */
 	return 0;
 }

 static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 {
 	u32 polarity;

 	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);

 	/* We use HIGH polarity, so unset the LOW bit */
 	polarity &= ~POLARITY_LOW;
 	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);

 	return 0;
 }

 static void wl1271_boot_hw_version(struct wl1271 *wl)
 {
 	u32 fuse;

 	fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
 	fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;

 	wl->hw_pg_ver = (s8)fuse;
 }

 int wl1271_boot(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk, pause;

 	wl1271_boot_hw_version(wl);

 	if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
 	else if (REF_CLOCK == 1 || REF_CLOCK == 3)
 		/* ref clk: 26/52 */
 		clk = 0x5;

 	if (REF_CLOCK != 0) {
 		u16 val;
 		/* Set clock type (open drain) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
 		val &= FREF_CLK_TYPE_BITS;
 		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);

 		/* Set clock pull mode (no pull) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
 		val |= NO_PULL;
 		wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
 	} else {
 		u16 val;
 		/* Set clock polarity */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
 		val &= FREF_CLK_POLARITY_BITS;
 		val |= CLK_REQ_OUTN_SEL;
 		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
 	}

 	wl1271_write32(wl, PLL_PARAMETERS, clk);

 	pause = wl1271_read32(wl, PLL_PARAMETERS);

 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);

 	pause &= ~(WU_COUNTER_PAUSE_VAL); /* FIXME: This should probably be
 					   * WU_COUNTER_PAUSE_VAL instead of
 					   * 0x3ff (magic number ).  How does
 					   * this work?! */
 	pause |= WU_COUNTER_PAUSE_VAL;
 	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);

 	/* Continue the ELP wake up sequence */
 	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);

 	wl1271_set_partition(wl, &part_table[PART_DRPW]);

 	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
 	   before taking DRPw out of reset */

 	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
 	clk = wl1271_read32(wl, DRPW_SCRATCH_START);

 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);

 	/* 2 */
 	clk |= (REF_CLOCK << 1) << 4;
 	wl1271_write32(wl, DRPW_SCRATCH_START, clk);

 	wl1271_set_partition(wl, &part_table[PART_WORK]);

 	/* Disable interrupts */
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);

 	ret = wl1271_boot_soft_reset(wl);
 	if (ret < 0)
 		goto out;

 	/* 2. start processing NVS file */
 	ret = wl1271_boot_upload_nvs(wl);
 	if (ret < 0)
 		goto out;

 	/* write firmware's last address (ie. it's length) to
 	 * ACX_EEPROMLESS_IND_REG */
 	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");

 	wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);

 	tmp = wl1271_read32(wl, CHIP_ID_B);

 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);

 	/* 6. read the EEPROM parameters */
 	tmp = wl1271_read32(wl, SCR_PAD2);

 	ret = wl1271_boot_write_irq_polarity(wl);
 	if (ret < 0)
 		goto out;

 	/* FIXME: Need to check whether this is really what we want */
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
 		       WL1271_ACX_ALL_EVENTS_VECTOR);

 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */

 	ret = wl1271_boot_upload_firmware(wl);
 	if (ret < 0)
 		goto out;

 	/* 10.5 start firmware */
 	ret = wl1271_boot_run_firmware(wl);
 	if (ret < 0)
 		goto out;

 	/* Enable firmware interrupts now */
 	wl1271_boot_enable_interrupts(wl);

 	/* set the wl1271 default filters */
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;

 	wl1271_event_mbox_config(wl);

 out:
 	return ret;
 }
	/*
	* This file is part of wl1271
	*
	* Copyright (C) 2008-2010 Nokia Corporation
	*
	* Contact: Luciano Coelho <luciano.coelho@nokia.com>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	* 02110-1301 USA
	*
	*/

	#include <linux/gpio.h>
	#include <linux/slab.h>

	#include "wl1271_acx.h"
	#include "wl1271_reg.h"
	#include "wl1271_boot.h"
	#include "wl1271_io.h"
	#include "wl1271_event.h"

	static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
	[PART_DOWN] = {
	.mem = {
	.start = 0x00000000,
	.size = 0x000177c0
	},
	.reg = {
	.start = REGISTERS_BASE,
	.size = 0x00008800
	},
	.mem2 = {
	.start = 0x00000000,
	.size = 0x00000000
	},
	.mem3 = {
	.start = 0x00000000,
	.size = 0x00000000
	},
	},

	[PART_WORK] = {
	.mem = {
	.start = 0x00040000,
	.size = 0x00014fc0
	},
	.reg = {
	.start = REGISTERS_BASE,
	.size = 0x0000a000
	},
	.mem2 = {
	.start = 0x003004f8,
	.size = 0x00000004
	},
	.mem3 = {
	.start = 0x00040404,
	.size = 0x00000000
	},
	},

	[PART_DRPW] = {
	.mem = {
	.start = 0x00040000,
	.size = 0x00014fc0
	},
	.reg = {
	.start = DRPW_BASE,
	.size = 0x00006000
	},
	.mem2 = {
	.start = 0x00000000,
	.size = 0x00000000
	},
	.mem3 = {
	.start = 0x00000000,
	.size = 0x00000000
	}
	}
	};

	static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
	{
	u32 cpu_ctrl;

	/* 10.5.0 run the firmware (I) */
	cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);

	/* 10.5.1 run the firmware (II) */
	cpu_ctrl \|= flag;
	wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
	}

	static void wl1271_boot_fw_version(struct wl1271 *wl)
	{
	struct wl1271_static_data static_data;

	wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
	false);

	strncpy(wl->chip.fw_ver, static_data.fw_version,
	sizeof(wl->chip.fw_ver));

	/* make sure the string is NULL-terminated */
	wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0';
	}

	static int wl1271_boot_upload_firmware_chunk(struct wl1271 wl, void buf,
	size_t fw_data_len, u32 dest)
	{
	struct wl1271_partition_set partition;
	int addr, chunk_num, partition_limit;
	u8 p, chunk;

	/* whal_FwCtrl_LoadFwImageSm() */

	wl1271_debug(DEBUG_BOOT, "starting firmware upload");

	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
	fw_data_len, CHUNK_SIZE);

	if ((fw_data_len % 4) != 0) {
	wl1271_error("firmware length not multiple of four");
	return -EIO;
	}

	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
	if (!chunk) {
	wl1271_error("allocation for firmware upload chunk failed");
	return -ENOMEM;
	}

	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
	partition.mem.start = dest;
	wl1271_set_partition(wl, &partition);

	/* 10.1 set partition limit and chunk num */
	chunk_num = 0;
	partition_limit = part_table[PART_DOWN].mem.size;

	while (chunk_num < fw_data_len / CHUNK_SIZE) {
	/* 10.2 update partition, if needed */
	addr = dest + (chunk_num + 2) * CHUNK_SIZE;
	if (addr > partition_limit) {
	addr = dest + chunk_num * CHUNK_SIZE;
	partition_limit = chunk_num * CHUNK_SIZE +
	part_table[PART_DOWN].mem.size;
	partition.mem.start = addr;
	wl1271_set_partition(wl, &partition);
	}

	/* 10.3 upload the chunk */
	addr = dest + chunk_num * CHUNK_SIZE;
	p = buf + chunk_num * CHUNK_SIZE;
	memcpy(chunk, p, CHUNK_SIZE);
	wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
	p, addr);
	wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);

	chunk_num++;
	}

	/* 10.4 upload the last chunk */
	addr = dest + chunk_num * CHUNK_SIZE;
	p = buf + chunk_num * CHUNK_SIZE;
	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
	fw_data_len % CHUNK_SIZE, p, addr);
	wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);

	kfree(chunk);
	return 0;
	}

	static int wl1271_boot_upload_firmware(struct wl1271 *wl)
	{
	u32 chunks, addr, len;
	int ret = 0;
	u8 *fw;

	fw = wl->fw;
	chunks = be32_to_cpup((__be32 *) fw);
	fw += sizeof(u32);

	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);

	while (chunks--) {
	addr = be32_to_cpup((__be32 *) fw);
	fw += sizeof(u32);
	len = be32_to_cpup((__be32 *) fw);
	fw += sizeof(u32);

	if (len > 300000) {
	wl1271_info("firmware chunk too long: %u", len);
	return -EINVAL;
	}
	wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
	chunks, addr, len);
	ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
	if (ret != 0)
	break;
	fw += len;
	}

	return ret;
	}

	static int wl1271_boot_upload_nvs(struct wl1271 *wl)
	{
	size_t nvs_len, burst_len;
	int i;
	u32 dest_addr, val;
	u8 nvs_ptr, nvs_aligned;

	if (wl->nvs == NULL)
	return -ENODEV;

	/* only the first part of the NVS needs to be uploaded */
	nvs_len = sizeof(wl->nvs->nvs);
	nvs_ptr = (u8 *)wl->nvs->nvs;

	/* update current MAC address to NVS */
	nvs_ptr[11] = wl->mac_addr[0];
	nvs_ptr[10] = wl->mac_addr[1];
	nvs_ptr[6] = wl->mac_addr[2];
	nvs_ptr[5] = wl->mac_addr[3];
	nvs_ptr[4] = wl->mac_addr[4];
	nvs_ptr[3] = wl->mac_addr[5];

	/*
	* Layout before the actual NVS tables:
	* 1 byte : burst length.
	* 2 bytes: destination address.
	* n bytes: data to burst copy.
	*
	* This is ended by a 0 length, then the NVS tables.
	*/

	/* FIXME: Do we need to check here whether the LSB is 1? */
	while (nvs_ptr[0]) {
	burst_len = nvs_ptr[0];
	dest_addr = (nvs_ptr[1] & 0xfe) \| ((u32)(nvs_ptr[2] << 8));

	/* FIXME: Due to our new wl1271_translate_reg_addr function,
	we need to add the REGISTER_BASE to the destination */
	dest_addr += REGISTERS_BASE;

	/* We move our pointer to the data */
	nvs_ptr += 3;

	for (i = 0; i < burst_len; i++) {
	val = (nvs_ptr[0] \| (nvs_ptr[1] << 8)
	\| (nvs_ptr[2] << 16) \| (nvs_ptr[3] << 24));

	wl1271_debug(DEBUG_BOOT,
	"nvs burst write 0x%x: 0x%x",
	dest_addr, val);
	wl1271_write32(wl, dest_addr, val);

	nvs_ptr += 4;
	dest_addr += 4;
	}
	}

	/*
	* We've reached the first zero length, the first NVS table
	* is 7 bytes further.
	*/
	nvs_ptr += 7;
	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
	nvs_len = ALIGN(nvs_len, 4);

	/* FIXME: The driver sets the partition here, but this is not needed,
	since it sets to the same one as currently in use */
	/* Now we must set the partition correctly */
	wl1271_set_partition(wl, &part_table[PART_WORK]);

	/* Copy the NVS tables to a new block to ensure alignment */
	/* FIXME: We jump 3 more bytes before uploading the NVS. It seems
	that our NVS files have three extra zeros here. I'm not sure whether
	the problem is in our NVS generation or we should really jumpt these
	3 bytes here */
	nvs_ptr += 3;

	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); if
	(!nvs_aligned) return -ENOMEM;

	/* And finally we upload the NVS tables */
	/* FIXME: In wl1271, we upload everything at once.
	No endianness handling needed here?! The ref driver doesn't do
	anything about it at this point */
	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);

	kfree(nvs_aligned);
	return 0;
	}

	static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
	{
	wl1271_enable_interrupts(wl);
	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
	WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
	}

	static int wl1271_boot_soft_reset(struct wl1271 *wl)
	{
	unsigned long timeout;
	u32 boot_data;

	/* perform soft reset */
	wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);

	/* SOFT_RESET is self clearing */
	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
	while (1) {
	boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
	wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
	if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
	break;

	if (time_after(jiffies, timeout)) {
	/* 1.2 check pWhalBus->uSelfClearTime if the
	* timeout was reached */
	wl1271_error("soft reset timeout");
	return -1;
	}

	udelay(SOFT_RESET_STALL_TIME);
	}

	/* disable Rx/Tx */
	wl1271_write32(wl, ENABLE, 0x0);

	/* disable auto calibration on start*/
	wl1271_write32(wl, SPARE_A2, 0xffff);

	return 0;
	}

	static int wl1271_boot_run_firmware(struct wl1271 *wl)
	{
	int loop, ret;
	u32 chip_id, intr;

	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);

	chip_id = wl1271_read32(wl, CHIP_ID_B);

	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);

	if (chip_id != wl->chip.id) {
	wl1271_error("chip id doesn't match after firmware boot");
	return -EIO;
	}

	/* wait for init to complete */
	loop = 0;
	while (loop++ < INIT_LOOP) {
	udelay(INIT_LOOP_DELAY);
	intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);

	if (intr == 0xffffffff) {
	wl1271_error("error reading hardware complete "
	"init indication");
	return -EIO;
	}
	/* check that ACX_INTR_INIT_COMPLETE is enabled */
	else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
	wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
	WL1271_ACX_INTR_INIT_COMPLETE);
	break;
	}
	}

	if (loop > INIT_LOOP) {
	wl1271_error("timeout waiting for the hardware to "
	"complete initialization");
	return -EIO;
	}

	/* get hardware config command mail box */
	wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);

	/* get hardware config event mail box */
	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);

	/* set the working partition to its "running" mode offset */
	wl1271_set_partition(wl, &part_table[PART_WORK]);

	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
	wl->cmd_box_addr, wl->event_box_addr);

	wl1271_boot_fw_version(wl);

	/*
	* in case of full asynchronous mode the firmware event must be
	* ready to receive event from the command mailbox
	*/

	/* unmask required mbox events */
	wl->event_mask = BSS_LOSE_EVENT_ID \|
	SCAN_COMPLETE_EVENT_ID \|
	PS_REPORT_EVENT_ID \|
	JOIN_EVENT_COMPLETE_ID \|
	DISCONNECT_EVENT_COMPLETE_ID \|
	RSSI_SNR_TRIGGER_0_EVENT_ID;

	ret = wl1271_event_unmask(wl);
	if (ret < 0) {
	wl1271_error("EVENT mask setting failed");
	return ret;
	}

	wl1271_event_mbox_config(wl);

	/* firmware startup completed */
	return 0;
	}

	static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
	{
	u32 polarity;

	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);

	/* We use HIGH polarity, so unset the LOW bit */
	polarity &= ~POLARITY_LOW;
	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);

	return 0;
	}

	static void wl1271_boot_hw_version(struct wl1271 *wl)
	{
	u32 fuse;

	fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
	fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;

	wl->hw_pg_ver = (s8)fuse;
	}

	int wl1271_boot(struct wl1271 *wl)
	{
	int ret = 0;
	u32 tmp, clk, pause;

	wl1271_boot_hw_version(wl);

	if (REF_CLOCK == 0 \|\| REF_CLOCK == 2 \|\| REF_CLOCK == 4)
	/* ref clk: 19.2/38.4/38.4-XTAL */
	clk = 0x3;
	else if (REF_CLOCK == 1 \|\| REF_CLOCK == 3)
	/* ref clk: 26/52 */
	clk = 0x5;

	if (REF_CLOCK != 0) {
	u16 val;
	/* Set clock type (open drain) */
	val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
	val &= FREF_CLK_TYPE_BITS;
	wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);

	/* Set clock pull mode (no pull) */
	val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
	val \|= NO_PULL;
	wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
	} else {
	u16 val;
	/* Set clock polarity */
	val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
	val &= FREF_CLK_POLARITY_BITS;
	val \|= CLK_REQ_OUTN_SEL;
	wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
	}

	wl1271_write32(wl, PLL_PARAMETERS, clk);

	pause = wl1271_read32(wl, PLL_PARAMETERS);

	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);

	pause &= ~(WU_COUNTER_PAUSE_VAL); /* FIXME: This should probably be
	* WU_COUNTER_PAUSE_VAL instead of
	* 0x3ff (magic number ). How does
	* this work?! */
	pause \|= WU_COUNTER_PAUSE_VAL;
	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);

	/* Continue the ELP wake up sequence */
	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
	udelay(500);

	wl1271_set_partition(wl, &part_table[PART_DRPW]);

	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
	to be used by DRPw FW. The RTRIM value will be added by the FW
	before taking DRPw out of reset */

	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
	clk = wl1271_read32(wl, DRPW_SCRATCH_START);

	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);

	/* 2 */
	clk \|= (REF_CLOCK << 1) << 4;
	wl1271_write32(wl, DRPW_SCRATCH_START, clk);

	wl1271_set_partition(wl, &part_table[PART_WORK]);

	/* Disable interrupts */
	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);

	ret = wl1271_boot_soft_reset(wl);
	if (ret < 0)
	goto out;

	/* 2. start processing NVS file */
	ret = wl1271_boot_upload_nvs(wl);
	if (ret < 0)
	goto out;

	/* write firmware's last address (ie. it's length) to
	* ACX_EEPROMLESS_IND_REG */
	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");

	wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);

	tmp = wl1271_read32(wl, CHIP_ID_B);

	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);

	/* 6. read the EEPROM parameters */
	tmp = wl1271_read32(wl, SCR_PAD2);

	ret = wl1271_boot_write_irq_polarity(wl);
	if (ret < 0)
	goto out;

	/* FIXME: Need to check whether this is really what we want */
	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
	WL1271_ACX_ALL_EVENTS_VECTOR);

	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
	* to upload_fw) */

	ret = wl1271_boot_upload_firmware(wl);
	if (ret < 0)
	goto out;

	/* 10.5 start firmware */
	ret = wl1271_boot_run_firmware(wl);
	if (ret < 0)
	goto out;

	/* Enable firmware interrupts now */
	wl1271_boot_enable_interrupts(wl);

	/* set the wl1271 default filters */
	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;

	wl1271_event_mbox_config(wl);

	out:
	return ret;
	}