blob: 2785946f659a19efcbc2298126314b95dee721a7 [file] [log] [blame]
/*
* Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _ATH5K_H
#define _ATH5K_H
/* TODO: Clean up channel debuging -doesn't work anyway- and start
* working on reg. control code using all available eeprom information
* -rev. engineering needed- */
#define CHAN_DEBUG 0
#include <linux/io.h>
#include <linux/types.h>
#include <net/mac80211.h>
/* RX/TX descriptor hw structs
* TODO: Driver part should only see sw structs */
#include "desc.h"
/* EEPROM structs/offsets
* TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
* and clean up common bits, then introduce set/get functions in eeprom.c */
#include "eeprom.h"
#include "../ath.h"
/* PCI IDs */
#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
/****************************\
GENERIC DRIVER DEFINITIONS
\****************************/
#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
printk(_level "ath5k %s: " _fmt, \
((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
##__VA_ARGS__)
#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
if (net_ratelimit()) \
ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
} while (0)
#define ATH5K_INFO(_sc, _fmt, ...) \
ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
#define ATH5K_WARN(_sc, _fmt, ...) \
ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
#define ATH5K_ERR(_sc, _fmt, ...) \
ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
/*
* AR5K REGISTER ACCESS
*/
/* Some macros to read/write fields */
/* First shift, then mask */
#define AR5K_REG_SM(_val, _flags) \
(((_val) << _flags##_S) & (_flags))
/* First mask, then shift */
#define AR5K_REG_MS(_val, _flags) \
(((_val) & (_flags)) >> _flags##_S)
/* Some registers can hold multiple values of interest. For this
* reason when we want to write to these registers we must first
* retrieve the values which we do not want to clear (lets call this
* old_data) and then set the register with this and our new_value:
* ( old_data | new_value) */
#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
(((_val) << _flags##_S) & (_flags)), _reg)
#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
(_mask)) | (_flags), _reg)
#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
/* Access to PHY registers */
#define AR5K_PHY_READ(ah, _reg) \
ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
#define AR5K_PHY_WRITE(ah, _reg, _val) \
ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
/* Access QCU registers per queue */
#define AR5K_REG_READ_Q(ah, _reg, _queue) \
(ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
ath5k_hw_reg_write(ah, (1 << _queue), _reg)
#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
_reg |= 1 << _queue; \
} while (0)
#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
_reg &= ~(1 << _queue); \
} while (0)
/* Used while writing initvals */
#define AR5K_REG_WAIT(_i) do { \
if (_i % 64) \
udelay(1); \
} while (0)
/* Register dumps are done per operation mode */
#define AR5K_INI_RFGAIN_5GHZ 0
#define AR5K_INI_RFGAIN_2GHZ 1
/* TODO: Clean this up */
#define AR5K_INI_VAL_11A 0
#define AR5K_INI_VAL_11A_TURBO 1
#define AR5K_INI_VAL_11B 2
#define AR5K_INI_VAL_11G 3
#define AR5K_INI_VAL_11G_TURBO 4
#define AR5K_INI_VAL_XR 0
#define AR5K_INI_VAL_MAX 5
/*
* Some tuneable values (these should be changeable by the user)
* TODO: Make use of them and add more options OR use debug/configfs
*/
#define AR5K_TUNE_DMA_BEACON_RESP 2
#define AR5K_TUNE_SW_BEACON_RESP 10
#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
#define AR5K_TUNE_RADAR_ALERT false
#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
#define AR5K_TUNE_REGISTER_TIMEOUT 20000
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
* be the max value. */
#define AR5K_TUNE_RSSI_THRES 129
/* This must be set when setting the RSSI threshold otherwise it can
* prevent a reset. If AR5K_RSSI_THR is read after writing to it
* the BMISS_THRES will be seen as 0, seems harware doesn't keep
* track of it. Max value depends on harware. For AR5210 this is just 7.
* For AR5211+ this seems to be up to 255. */
#define AR5K_TUNE_BMISS_THRES 7
#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
#define AR5K_TUNE_BEACON_INTERVAL 100
#define AR5K_TUNE_AIFS 2
#define AR5K_TUNE_AIFS_11B 2
#define AR5K_TUNE_AIFS_XR 0
#define AR5K_TUNE_CWMIN 15
#define AR5K_TUNE_CWMIN_11B 31
#define AR5K_TUNE_CWMIN_XR 3
#define AR5K_TUNE_CWMAX 1023
#define AR5K_TUNE_CWMAX_11B 1023
#define AR5K_TUNE_CWMAX_XR 7
#define AR5K_TUNE_NOISE_FLOOR -72
#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95
#define AR5K_TUNE_MAX_TXPOWER 63
#define AR5K_TUNE_DEFAULT_TXPOWER 25
#define AR5K_TUNE_TPC_TXPOWER false
#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */
#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */
#define AR5K_INIT_CARR_SENSE_EN 1
/*Swap RX/TX Descriptor for big endian archs*/
#if defined(__BIG_ENDIAN)
#define AR5K_INIT_CFG ( \
AR5K_CFG_SWTD | AR5K_CFG_SWRD \
)
#else
#define AR5K_INIT_CFG 0x00000000
#endif
/* Initial values */
#define AR5K_INIT_CYCRSSI_THR1 2
#define AR5K_INIT_TX_LATENCY 502
#define AR5K_INIT_USEC 39
#define AR5K_INIT_USEC_TURBO 79
#define AR5K_INIT_USEC_32 31
#define AR5K_INIT_SLOT_TIME 396
#define AR5K_INIT_SLOT_TIME_TURBO 480
#define AR5K_INIT_ACK_CTS_TIMEOUT 1024
#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
#define AR5K_INIT_PROG_IFS 920
#define AR5K_INIT_PROG_IFS_TURBO 960
#define AR5K_INIT_EIFS 3440
#define AR5K_INIT_EIFS_TURBO 6880
#define AR5K_INIT_SIFS 560
#define AR5K_INIT_SIFS_TURBO 480
#define AR5K_INIT_SH_RETRY 10
#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY
#define AR5K_INIT_SSH_RETRY 32
#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
#define AR5K_INIT_TX_RETRY 10
#define AR5K_INIT_TRANSMIT_LATENCY ( \
(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
(AR5K_INIT_USEC) \
)
#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
(AR5K_INIT_USEC_TURBO) \
)
#define AR5K_INIT_PROTO_TIME_CNTRL ( \
(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
(AR5K_INIT_PROG_IFS) \
)
#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \
(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
(AR5K_INIT_PROG_IFS_TURBO) \
)
/* token to use for aifs, cwmin, cwmax in MadWiFi */
#define AR5K_TXQ_USEDEFAULT ((u32) -1)
/* GENERIC CHIPSET DEFINITIONS */
/* MAC Chips */
enum ath5k_version {
AR5K_AR5210 = 0,
AR5K_AR5211 = 1,
AR5K_AR5212 = 2,
};
/* PHY Chips */
enum ath5k_radio {
AR5K_RF5110 = 0,
AR5K_RF5111 = 1,
AR5K_RF5112 = 2,
AR5K_RF2413 = 3,
AR5K_RF5413 = 4,
AR5K_RF2316 = 5,
AR5K_RF2317 = 6,
AR5K_RF2425 = 7,
};
/*
* Common silicon revision/version values
*/
enum ath5k_srev_type {
AR5K_VERSION_MAC,
AR5K_VERSION_RAD,
};
struct ath5k_srev_name {
const char *sr_name;
enum ath5k_srev_type sr_type;
u_int sr_val;
};
#define AR5K_SREV_UNKNOWN 0xffff
#define AR5K_SREV_AR5210 0x00 /* Crete */
#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
#define AR5K_SREV_AR5311B 0x30 /* Spirit */
#define AR5K_SREV_AR5211 0x40 /* Oahu */
#define AR5K_SREV_AR5212 0x50 /* Venice */
#define AR5K_SREV_AR5212_V4 0x54 /* ??? */
#define AR5K_SREV_AR5213 0x55 /* ??? */
#define AR5K_SREV_AR5213A 0x59 /* Hainan */
#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
#define AR5K_SREV_AR2414 0x70 /* Griffin */
#define AR5K_SREV_AR5424 0x90 /* Condor */
#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
#define AR5K_SREV_AR5414 0xa0 /* Eagle */
#define AR5K_SREV_AR2415 0xb0 /* Talon */
#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
#define AR5K_SREV_AR5418 0xca /* PCI-E */
#define AR5K_SREV_AR2425 0xe0 /* Swan */
#define AR5K_SREV_AR2417 0xf0 /* Nala */
#define AR5K_SREV_RAD_5110 0x00
#define AR5K_SREV_RAD_5111 0x10
#define AR5K_SREV_RAD_5111A 0x15
#define AR5K_SREV_RAD_2111 0x20
#define AR5K_SREV_RAD_5112 0x30
#define AR5K_SREV_RAD_5112A 0x35
#define AR5K_SREV_RAD_5112B 0x36
#define AR5K_SREV_RAD_2112 0x40
#define AR5K_SREV_RAD_2112A 0x45
#define AR5K_SREV_RAD_2112B 0x46
#define AR5K_SREV_RAD_2413 0x50
#define AR5K_SREV_RAD_5413 0x60
#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */
#define AR5K_SREV_RAD_2317 0x80
#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
#define AR5K_SREV_RAD_2425 0xa2
#define AR5K_SREV_RAD_5133 0xc0
#define AR5K_SREV_PHY_5211 0x30
#define AR5K_SREV_PHY_5212 0x41
#define AR5K_SREV_PHY_5212A 0x42
#define AR5K_SREV_PHY_5212B 0x43
#define AR5K_SREV_PHY_2413 0x45
#define AR5K_SREV_PHY_5413 0x61
#define AR5K_SREV_PHY_2425 0x70
/* IEEE defs */
#define IEEE80211_MAX_LEN 2500
/* TODO add support to mac80211 for vendor-specific rates and modes */
/*
* Some of this information is based on Documentation from:
*
* http://madwifi.org/wiki/ChipsetFeatures/SuperAG
*
* Modulation for Atheros' eXtended Range - range enhancing extension that is
* supposed to double the distance an Atheros client device can keep a
* connection with an Atheros access point. This is achieved by increasing
* the receiver sensitivity up to, -105dBm, which is about 20dB above what
* the 802.11 specifications demand. In addition, new (proprietary) data rates
* are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
*
* Please note that can you either use XR or TURBO but you cannot use both,
* they are exclusive.
*
*/
#define MODULATION_XR 0x00000200
/*
* Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
* throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
* signaling rate achieved through the bonding of two 54Mbit/s 802.11g
* channels. To use this feature your Access Point must also suport it.
* There is also a distinction between "static" and "dynamic" turbo modes:
*
* - Static: is the dumb version: devices set to this mode stick to it until
* the mode is turned off.
* - Dynamic: is the intelligent version, the network decides itself if it
* is ok to use turbo. As soon as traffic is detected on adjacent channels
* (which would get used in turbo mode), or when a non-turbo station joins
* the network, turbo mode won't be used until the situation changes again.
* Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
* monitors the used radio band in order to decide whether turbo mode may
* be used or not.
*
* This article claims Super G sticks to bonding of channels 5 and 6 for
* USA:
*
* http://www.pcworld.com/article/id,113428-page,1/article.html
*
* The channel bonding seems to be driver specific though. In addition to
* deciding what channels will be used, these "Turbo" modes are accomplished
* by also enabling the following features:
*
* - Bursting: allows multiple frames to be sent at once, rather than pausing
* after each frame. Bursting is a standards-compliant feature that can be
* used with any Access Point.
* - Fast frames: increases the amount of information that can be sent per
* frame, also resulting in a reduction of transmission overhead. It is a
* proprietary feature that needs to be supported by the Access Point.
* - Compression: data frames are compressed in real time using a Lempel Ziv
* algorithm. This is done transparently. Once this feature is enabled,
* compression and decompression takes place inside the chipset, without
* putting additional load on the host CPU.
*
*/
#define MODULATION_TURBO 0x00000080
enum ath5k_driver_mode {
AR5K_MODE_11A = 0,
AR5K_MODE_11A_TURBO = 1,
AR5K_MODE_11B = 2,
AR5K_MODE_11G = 3,
AR5K_MODE_11G_TURBO = 4,
AR5K_MODE_XR = 0,
AR5K_MODE_MAX = 5
};
enum ath5k_ant_mode {
AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */
AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */
AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */
AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */
AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */
AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */
AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */
AR5K_ANTMODE_MAX,
};
/****************\
TX DEFINITIONS
\****************/
/*
* TX Status descriptor
*/
struct ath5k_tx_status {
u16 ts_seqnum;
u16 ts_tstamp;
u8 ts_status;
u8 ts_rate[4];
u8 ts_retry[4];
u8 ts_final_idx;
s8 ts_rssi;
u8 ts_shortretry;
u8 ts_longretry;
u8 ts_virtcol;
u8 ts_antenna;
};
#define AR5K_TXSTAT_ALTRATE 0x80
#define AR5K_TXERR_XRETRY 0x01
#define AR5K_TXERR_FILT 0x02
#define AR5K_TXERR_FIFO 0x04
/**
* enum ath5k_tx_queue - Queue types used to classify tx queues.
* @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
* @AR5K_TX_QUEUE_DATA: A normal data queue
* @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
* @AR5K_TX_QUEUE_BEACON: The beacon queue
* @AR5K_TX_QUEUE_CAB: The after-beacon queue
* @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
*/
enum ath5k_tx_queue {
AR5K_TX_QUEUE_INACTIVE = 0,
AR5K_TX_QUEUE_DATA,
AR5K_TX_QUEUE_XR_DATA,
AR5K_TX_QUEUE_BEACON,
AR5K_TX_QUEUE_CAB,
AR5K_TX_QUEUE_UAPSD,
};
#define AR5K_NUM_TX_QUEUES 10
#define AR5K_NUM_TX_QUEUES_NOQCU 2
/*
* Queue syb-types to classify normal data queues.
* These are the 4 Access Categories as defined in
* WME spec. 0 is the lowest priority and 4 is the
* highest. Normal data that hasn't been classified
* goes to the Best Effort AC.
*/
enum ath5k_tx_queue_subtype {
AR5K_WME_AC_BK = 0, /*Background traffic*/
AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
AR5K_WME_AC_VI, /*Video traffic*/
AR5K_WME_AC_VO, /*Voice traffic*/
};
/*
* Queue ID numbers as returned by the hw functions, each number
* represents a hw queue. If hw does not support hw queues
* (eg 5210) all data goes in one queue. These match
* d80211 definitions (net80211/MadWiFi don't use them).
*/
enum ath5k_tx_queue_id {
AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/
AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
AR5K_TX_QUEUE_ID_UAPSD = 8,
AR5K_TX_QUEUE_ID_XR_DATA = 9,
};
/*
* Flags to set hw queue's parameters...
*/
#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */
#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */
#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */
#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */
#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */
#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/
#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */
#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */
#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/
/*
* A struct to hold tx queue's parameters
*/
struct ath5k_txq_info {
enum ath5k_tx_queue tqi_type;
enum ath5k_tx_queue_subtype tqi_subtype;
u16 tqi_flags; /* Tx queue flags (see above) */
u32 tqi_aifs; /* Arbitrated Interframe Space */
s32 tqi_cw_min; /* Minimum Contention Window */
s32 tqi_cw_max; /* Maximum Contention Window */
u32 tqi_cbr_period; /* Constant bit rate period */
u32 tqi_cbr_overflow_limit;
u32 tqi_burst_time;
u32 tqi_ready_time; /* Time queue waits after an event */
};
/*
* Transmit packet types.
* used on tx control descriptor
*/
enum ath5k_pkt_type {
AR5K_PKT_TYPE_NORMAL = 0,
AR5K_PKT_TYPE_ATIM = 1,
AR5K_PKT_TYPE_PSPOLL = 2,
AR5K_PKT_TYPE_BEACON = 3,
AR5K_PKT_TYPE_PROBE_RESP = 4,
AR5K_PKT_TYPE_PIFS = 5,
};
/*
* TX power and TPC settings
*/
#define AR5K_TXPOWER_OFDM(_r, _v) ( \
((0 & 1) << ((_v) + 6)) | \
(((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \
)
#define AR5K_TXPOWER_CCK(_r, _v) ( \
(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \
)
/*
* DMA size definitions (2^n+2)
*/
enum ath5k_dmasize {
AR5K_DMASIZE_4B = 0,
AR5K_DMASIZE_8B,
AR5K_DMASIZE_16B,
AR5K_DMASIZE_32B,
AR5K_DMASIZE_64B,
AR5K_DMASIZE_128B,
AR5K_DMASIZE_256B,
AR5K_DMASIZE_512B
};
/****************\
RX DEFINITIONS
\****************/
/*
* RX Status descriptor
*/
struct ath5k_rx_status {
u16 rs_datalen;
u16 rs_tstamp;
u8 rs_status;
u8 rs_phyerr;
s8 rs_rssi;
u8 rs_keyix;
u8 rs_rate;
u8 rs_antenna;
u8 rs_more;
};
#define AR5K_RXERR_CRC 0x01
#define AR5K_RXERR_PHY 0x02
#define AR5K_RXERR_FIFO 0x04
#define AR5K_RXERR_DECRYPT 0x08
#define AR5K_RXERR_MIC 0x10
#define AR5K_RXKEYIX_INVALID ((u8) - 1)
#define AR5K_TXKEYIX_INVALID ((u32) - 1)
/**************************\
BEACON TIMERS DEFINITIONS
\**************************/
#define AR5K_BEACON_PERIOD 0x0000ffff
#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
/*
* TSF to TU conversion:
*
* TSF is a 64bit value in usec (microseconds).
* TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
* time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
*/
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
/*******************************\
GAIN OPTIMIZATION DEFINITIONS
\*******************************/
enum ath5k_rfgain {
AR5K_RFGAIN_INACTIVE = 0,
AR5K_RFGAIN_ACTIVE,
AR5K_RFGAIN_READ_REQUESTED,
AR5K_RFGAIN_NEED_CHANGE,
};
struct ath5k_gain {
u8 g_step_idx;
u8 g_current;
u8 g_target;
u8 g_low;
u8 g_high;
u8 g_f_corr;
u8 g_state;
};
/********************\
COMMON DEFINITIONS
\********************/
#define AR5K_SLOT_TIME_9 396
#define AR5K_SLOT_TIME_20 880
#define AR5K_SLOT_TIME_MAX 0xffff
/* channel_flags */
#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */
#define CHANNEL_TURBO 0x0010 /* Turbo Channel */
#define CHANNEL_CCK 0x0020 /* CCK channel */
#define CHANNEL_OFDM 0x0040 /* OFDM channel */
#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */
#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
#define CHANNEL_XR 0x0800 /* XR channel */
#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
#define CHANNEL_108A CHANNEL_T
#define CHANNEL_108G CHANNEL_TG
#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
CHANNEL_TURBO)
#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO)
#define CHANNEL_MODES CHANNEL_ALL
/*
* Used internaly for reset_tx_queue).
* Also see struct struct ieee80211_channel.
*/
#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0)
#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0)
/*
* The following structure is used to map 2GHz channels to
* 5GHz Atheros channels.
* TODO: Clean up
*/
struct ath5k_athchan_2ghz {
u32 a2_flags;
u16 a2_athchan;
};
/******************\
RATE DEFINITIONS
\******************/
/**
* Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
*
* The rate code is used to get the RX rate or set the TX rate on the
* hardware descriptors. It is also used for internal modulation control
* and settings.
*
* This is the hardware rate map we are aware of:
*
* rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
* rate_kbps 3000 1000 ? ? ? 2000 500 48000
*
* rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
* rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
*
* rate_code 17 18 19 20 21 22 23 24
* rate_kbps ? ? ? ? ? ? ? 11000
*
* rate_code 25 26 27 28 29 30 31 32
* rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
*
* "S" indicates CCK rates with short preamble.
*
* AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
* lowest 4 bits, so they are the same as below with a 0xF mask.
* (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
* We handle this in ath5k_setup_bands().
*/
#define AR5K_MAX_RATES 32
/* B */
#define ATH5K_RATE_CODE_1M 0x1B
#define ATH5K_RATE_CODE_2M 0x1A
#define ATH5K_RATE_CODE_5_5M 0x19
#define ATH5K_RATE_CODE_11M 0x18
/* A and G */
#define ATH5K_RATE_CODE_6M 0x0B
#define ATH5K_RATE_CODE_9M 0x0F
#define ATH5K_RATE_CODE_12M 0x0A
#define ATH5K_RATE_CODE_18M 0x0E
#define ATH5K_RATE_CODE_24M 0x09
#define ATH5K_RATE_CODE_36M 0x0D
#define ATH5K_RATE_CODE_48M 0x08
#define ATH5K_RATE_CODE_54M 0x0C
/* XR */
#define ATH5K_RATE_CODE_XR_500K 0x07
#define ATH5K_RATE_CODE_XR_1M 0x02
#define ATH5K_RATE_CODE_XR_2M 0x06
#define ATH5K_RATE_CODE_XR_3M 0x01
/* adding this flag to rate_code enables short preamble */
#define AR5K_SET_SHORT_PREAMBLE 0x04
/*
* Crypto definitions
*/
#define AR5K_KEYCACHE_SIZE 8
/***********************\
HW RELATED DEFINITIONS
\***********************/
/*
* Misc definitions
*/
#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
#define AR5K_ASSERT_ENTRY(_e, _s) do { \
if (_e >= _s) \
return (false); \
} while (0)
/*
* Hardware interrupt abstraction
*/
/**
* enum ath5k_int - Hardware interrupt masks helpers
*
* @AR5K_INT_RX: mask to identify received frame interrupts, of type
* AR5K_ISR_RXOK or AR5K_ISR_RXERR
* @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
* @AR5K_INT_RXNOFRM: No frame received (?)
* @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
* Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
* LinkPtr is NULL. For more details, refer to:
* http://www.freepatentsonline.com/20030225739.html
* @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
* Note that Rx overrun is not always fatal, on some chips we can continue
* operation without reseting the card, that's why int_fatal is not
* common for all chips.
* @AR5K_INT_TX: mask to identify received frame interrupts, of type
* AR5K_ISR_TXOK or AR5K_ISR_TXERR
* @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
* @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
* We currently do increments on interrupt by
* (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
* @AR5K_INT_MIB: Indicates the either Management Information Base counters or
* one of the PHY error counters reached the maximum value and should be
* read and cleared.
* @AR5K_INT_RXPHY: RX PHY Error
* @AR5K_INT_RXKCM: RX Key cache miss
* @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
* beacon that must be handled in software. The alternative is if you
* have VEOL support, in that case you let the hardware deal with things.
* @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
* beacons from the AP have associated with, we should probably try to
* reassociate. When in IBSS mode this might mean we have not received
* any beacons from any local stations. Note that every station in an
* IBSS schedules to send beacons at the Target Beacon Transmission Time
* (TBTT) with a random backoff.
* @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
* @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
* until properly handled
* @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
* errors. These types of errors we can enable seem to be of type
* AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
* @AR5K_INT_GLOBAL: Used to clear and set the IER
* @AR5K_INT_NOCARD: signals the card has been removed
* @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
* bit value
*
* These are mapped to take advantage of some common bits
* between the MACs, to be able to set intr properties
* easier. Some of them are not used yet inside hw.c. Most map
* to the respective hw interrupt value as they are common amogst different
* MACs.
*/
enum ath5k_int {
AR5K_INT_RXOK = 0x00000001,
AR5K_INT_RXDESC = 0x00000002,
AR5K_INT_RXERR = 0x00000004,
AR5K_INT_RXNOFRM = 0x00000008,
AR5K_INT_RXEOL = 0x00000010,
AR5K_INT_RXORN = 0x00000020,
AR5K_INT_TXOK = 0x00000040,
AR5K_INT_TXDESC = 0x00000080,
AR5K_INT_TXERR = 0x00000100,
AR5K_INT_TXNOFRM = 0x00000200,
AR5K_INT_TXEOL = 0x00000400,
AR5K_INT_TXURN = 0x00000800,
AR5K_INT_MIB = 0x00001000,
AR5K_INT_SWI = 0x00002000,
AR5K_INT_RXPHY = 0x00004000,
AR5K_INT_RXKCM = 0x00008000,
AR5K_INT_SWBA = 0x00010000,
AR5K_INT_BRSSI = 0x00020000,
AR5K_INT_BMISS = 0x00040000,
AR5K_INT_FATAL = 0x00080000, /* Non common */
AR5K_INT_BNR = 0x00100000, /* Non common */
AR5K_INT_TIM = 0x00200000, /* Non common */
AR5K_INT_DTIM = 0x00400000, /* Non common */
AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */
AR5K_INT_GPIO = 0x01000000,
AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */
AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */
AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */
AR5K_INT_QCBRORN = 0x10000000, /* Non common */
AR5K_INT_QCBRURN = 0x20000000, /* Non common */
AR5K_INT_QTRIG = 0x40000000, /* Non common */
AR5K_INT_GLOBAL = 0x80000000,
AR5K_INT_COMMON = AR5K_INT_RXOK
| AR5K_INT_RXDESC
| AR5K_INT_RXERR
| AR5K_INT_RXNOFRM
| AR5K_INT_RXEOL
| AR5K_INT_RXORN
| AR5K_INT_TXOK
| AR5K_INT_TXDESC
| AR5K_INT_TXERR
| AR5K_INT_TXNOFRM
| AR5K_INT_TXEOL
| AR5K_INT_TXURN
| AR5K_INT_MIB
| AR5K_INT_SWI
| AR5K_INT_RXPHY
| AR5K_INT_RXKCM
| AR5K_INT_SWBA
| AR5K_INT_BRSSI
| AR5K_INT_BMISS
| AR5K_INT_GPIO
| AR5K_INT_GLOBAL,
AR5K_INT_NOCARD = 0xffffffff
};
/* mask which calibration is active at the moment */
enum ath5k_calibration_mask {
AR5K_CALIBRATION_FULL = 0x01,
AR5K_CALIBRATION_SHORT = 0x02,
AR5K_CALIBRATION_ANI = 0x04,
};
/*
* Power management
*/
enum ath5k_power_mode {
AR5K_PM_UNDEFINED = 0,
AR5K_PM_AUTO,
AR5K_PM_AWAKE,
AR5K_PM_FULL_SLEEP,
AR5K_PM_NETWORK_SLEEP,
};
/*
* These match net80211 definitions (not used in
* mac80211).
* TODO: Clean this up
*/
#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
/* GPIO-controlled software LED */
#define AR5K_SOFTLED_PIN 0
#define AR5K_SOFTLED_ON 0
#define AR5K_SOFTLED_OFF 1
/*
* Chipset capabilities -see ath5k_hw_get_capability-
* get_capability function is not yet fully implemented
* in ath5k so most of these don't work yet...
* TODO: Implement these & merge with _TUNE_ stuff above
*/
enum ath5k_capability_type {
AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */
AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */
AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */
AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */
AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */
AR5K_CAP_VEOL = 7, /* Supports virtual EOL */
AR5K_CAP_COMPRESSION = 8, /* Supports compression */
AR5K_CAP_BURST = 9, /* Supports packet bursting */
AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */
AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */
AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */
AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */
AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */
AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */
AR5K_CAP_XR = 16, /* Supports XR mode */
AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */
AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */
AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */
AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */
};
/* XXX: we *may* move cap_range stuff to struct wiphy */
struct ath5k_capabilities {
/*
* Supported PHY modes
* (ie. CHANNEL_A, CHANNEL_B, ...)
*/
DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
/*
* Frequency range (without regulation restrictions)
*/
struct {
u16 range_2ghz_min;
u16 range_2ghz_max;
u16 range_5ghz_min;
u16 range_5ghz_max;
} cap_range;
/*
* Values stored in the EEPROM (some of them...)
*/
struct ath5k_eeprom_info cap_eeprom;
/*
* Queue information
*/
struct {
u8 q_tx_num;
} cap_queues;
bool cap_has_phyerr_counters;
};
/* size of noise floor history (keep it a power of two) */
#define ATH5K_NF_CAL_HIST_MAX 8
struct ath5k_nfcal_hist
{
s16 index; /* current index into nfval */
s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */
};
/**
* struct avg_val - Helper structure for average calculation
* @avg: contains the actual average value
* @avg_weight: is used internally during calculation to prevent rounding errors
*/
struct ath5k_avg_val {
int avg;
int avg_weight;
};
/***************************************\
HARDWARE ABSTRACTION LAYER STRUCTURE
\***************************************/
/*
* Misc defines
*/
#define AR5K_MAX_GPIO 10
#define AR5K_MAX_RF_BANKS 8
/* TODO: Clean up and merge with ath5k_softc */
struct ath5k_hw {
struct ath_common common;
struct ath5k_softc *ah_sc;
void __iomem *ah_iobase;
enum ath5k_int ah_imr;
struct ieee80211_channel *ah_current_channel;
bool ah_turbo;
bool ah_calibration;
bool ah_single_chip;
bool ah_aes_support;
bool ah_combined_mic;
enum ath5k_version ah_version;
enum ath5k_radio ah_radio;
u32 ah_phy;
u32 ah_mac_srev;
u16 ah_mac_version;
u16 ah_phy_revision;
u16 ah_radio_5ghz_revision;
u16 ah_radio_2ghz_revision;
#define ah_modes ah_capabilities.cap_mode
#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
u32 ah_atim_window;
u32 ah_aifs;
u32 ah_cw_min;
u32 ah_cw_max;
u32 ah_limit_tx_retries;
u8 ah_coverage_class;
/* Antenna Control */
u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
u8 ah_ant_mode;
u8 ah_tx_ant;
u8 ah_def_ant;
bool ah_software_retry;
struct ath5k_capabilities ah_capabilities;
struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
u32 ah_txq_status;
u32 ah_txq_imr_txok;
u32 ah_txq_imr_txerr;
u32 ah_txq_imr_txurn;
u32 ah_txq_imr_txdesc;
u32 ah_txq_imr_txeol;
u32 ah_txq_imr_cbrorn;
u32 ah_txq_imr_cbrurn;
u32 ah_txq_imr_qtrig;
u32 ah_txq_imr_nofrm;
u32 ah_txq_isr;
u32 *ah_rf_banks;
size_t ah_rf_banks_size;
size_t ah_rf_regs_count;
struct ath5k_gain ah_gain;
u8 ah_offset[AR5K_MAX_RF_BANKS];
struct {
/* Temporary tables used for interpolation */
u8 tmpL[AR5K_EEPROM_N_PD_GAINS]
[AR5K_EEPROM_POWER_TABLE_SIZE];
u8 tmpR[AR5K_EEPROM_N_PD_GAINS]
[AR5K_EEPROM_POWER_TABLE_SIZE];
u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
u16 txp_rates_power_table[AR5K_MAX_RATES];
u8 txp_min_idx;
bool txp_tpc;
/* Values in 0.25dB units */
s16 txp_min_pwr;
s16 txp_max_pwr;
/* Values in 0.5dB units */
s16 txp_offset;
s16 txp_ofdm;
s16 txp_cck_ofdm_gainf_delta;
/* Value in dB units */
s16 txp_cck_ofdm_pwr_delta;
} ah_txpower;
struct {
bool r_enabled;
int r_last_alert;
struct ieee80211_channel r_last_channel;
} ah_radar;
struct ath5k_nfcal_hist ah_nfcal_hist;
/* average beacon RSSI in our BSS (used by ANI) */
struct ath5k_avg_val ah_beacon_rssi_avg;
/* noise floor from last periodic calibration */
s32 ah_noise_floor;
/* Calibration timestamp */
unsigned long ah_cal_next_full;
unsigned long ah_cal_next_ani;
/* Calibration mask */
u8 ah_cal_mask;
/*
* Function pointers
*/
int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
u32 size, unsigned int flags);
int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, int, enum ath5k_pkt_type,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int);
int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int);
int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
struct ath5k_tx_status *);
int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
struct ath5k_rx_status *);
};
/*
* Prototypes
*/
/* Attach/Detach Functions */
int ath5k_hw_attach(struct ath5k_softc *sc);
void ath5k_hw_detach(struct ath5k_hw *ah);
/* LED functions */
int ath5k_init_leds(struct ath5k_softc *sc);
void ath5k_led_enable(struct ath5k_softc *sc);
void ath5k_led_off(struct ath5k_softc *sc);
void ath5k_unregister_leds(struct ath5k_softc *sc);
/* Reset Functions */
int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
int ath5k_hw_on_hold(struct ath5k_hw *ah);
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ieee80211_channel *channel, bool change_channel);
int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
bool is_set);
/* Power management functions */
/* DMA Related Functions */
void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
u32 phys_addr);
int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
/* Interrupt handling */
bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask);
void ath5k_hw_update_mib_counters(struct ath5k_hw *ah);
/* EEPROM access functions */
int ath5k_eeprom_init(struct ath5k_hw *ah);
void ath5k_eeprom_detach(struct ath5k_hw *ah);
int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
/* Protocol Control Unit Functions */
extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
/* BSSID Functions */
int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
void ath5k_hw_set_associd(struct ath5k_hw *ah);
void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
/* RX Filter functions */
void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
/* Beacon control functions */
u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
/* ACK bit rate */
void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
/* Clock rate related functions */
unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah);
/* Key table (WEP) functions */
int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
const struct ieee80211_key_conf *key, const u8 *mac);
int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
/* Queue Control Unit, DFS Control Unit Functions */
int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
struct ath5k_txq_info *queue_info);
int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
const struct ath5k_txq_info *queue_info);
int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
enum ath5k_tx_queue queue_type,
struct ath5k_txq_info *queue_info);
u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
/* Hardware Descriptor Functions */
int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
/* GPIO Functions */
void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
u32 interrupt_level);
/* rfkill Functions */
void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
/* Misc functions */
int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
int ath5k_hw_get_capability(struct ath5k_hw *ah,
enum ath5k_capability_type cap_type, u32 capability,
u32 *result);
int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
/* Initial register settings functions */
int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
/* Initialize RF */
int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
struct ieee80211_channel *channel,
unsigned int mode);
int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
/* PHY/RF channel functions */
bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
/* PHY calibration */
void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel);
/* Spur mitigation */
bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
struct ieee80211_channel *channel);
void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
struct ieee80211_channel *channel);
/* Misc PHY functions */
u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
int ath5k_hw_phy_disable(struct ath5k_hw *ah);
/* Antenna control */
void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
/* TX power setup */
int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
u8 ee_mode, u8 txpower);
int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
/*
* Functions used internaly
*/
static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
{
return &ah->common;
}
static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
{
return &(ath5k_hw_common(ah)->regulatory);
}
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
return ioread32(ah->ah_iobase + reg);
}
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
{
iowrite32(val, ah->ah_iobase + reg);
}
static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
{
u32 retval = 0, bit, i;
for (i = 0; i < bits; i++) {
bit = (val >> i) & 1;
retval = (retval << 1) | bit;
}
return retval;
}
#define AVG_SAMPLES 8
#define AVG_FACTOR 1000
/**
* ath5k_moving_average - Exponentially weighted moving average
* @avg: average structure
* @val: current value
*
* This implementation make use of a struct ath5k_avg_val to prevent rounding
* errors.
*/
static inline struct ath5k_avg_val
ath5k_moving_average(const struct ath5k_avg_val avg, const int val)
{
struct ath5k_avg_val new;
new.avg_weight = avg.avg_weight ?
(((avg.avg_weight * ((AVG_SAMPLES) - 1)) +
(val * (AVG_FACTOR))) / (AVG_SAMPLES)) :
(val * (AVG_FACTOR));
new.avg = new.avg_weight / (AVG_FACTOR);
return new;
}
#endif