blob: 71be4af5e975bec078508d1ea920568edf11b289 [file] [log] [blame]
/*
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <soc/tegra/fuse.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include "flowctrl.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
#define PMC_SCRATCH41 0x140
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
#ifdef CONFIG_PM_SLEEP
/*
* tegra_resume
*
* CPU boot vector when restarting the a CPU following
* an LP2 transition. Also branched to by LP0 and LP1 resume after
* re-enabling sdram.
*
* r6: SoC ID
* r8: CPU part number
*/
ENTRY(tegra_resume)
check_cpu_part_num 0xc09, r8, r9
bleq v7_invalidate_l1
cpu_id r0
cmp r0, #0 @ CPU0?
THUMB( it ne )
bne cpu_resume @ no
tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
/* Are we on Tegra20? */
cmp r6, #TEGRA20
beq 1f @ Yes
/* Clear the flow controller flags for this CPU. */
cpu_to_csr_reg r1, r0
mov32 r2, TEGRA_FLOW_CTRL_BASE
ldr r1, [r2, r1]
/* Clear event & intr flag */
orr r1, r1, \
#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
movw r0, #0x3FFD @ enable, cluster_switch, immed, bitmaps
@ & ext flags for CPU power mgnt
bic r1, r1, r0
str r1, [r2]
1:
mov32 r9, 0xc09
cmp r8, r9
bne end_ca9_scu_l2_resume
#ifdef CONFIG_HAVE_ARM_SCU
/* enable SCU */
mov32 r0, TEGRA_ARM_PERIF_BASE
ldr r1, [r0]
orr r1, r1, #1
str r1, [r0]
#endif
#ifdef CONFIG_CACHE_L2X0
/* L2 cache resume & re-enable */
bl l2c310_early_resume
#endif
end_ca9_scu_l2_resume:
mov32 r9, 0xc0f
cmp r8, r9
bleq tegra_init_l2_for_a15
b cpu_resume
ENDPROC(tegra_resume)
#endif
.align L1_CACHE_SHIFT
ENTRY(__tegra_cpu_reset_handler_start)
/*
* __tegra_cpu_reset_handler:
*
* Common handler for all CPU reset events.
*
* Register usage within the reset handler:
*
* Others: scratch
* R6 = SoC ID
* R7 = CPU present (to the OS) mask
* R8 = CPU in LP1 state mask
* R9 = CPU in LP2 state mask
* R10 = CPU number
* R11 = CPU mask
* R12 = pointer to reset handler data
*
* NOTE: This code is copied to IRAM. All code and data accesses
* must be position-independent.
*/
.align L1_CACHE_SHIFT
ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
t20_check:
cmp r6, #TEGRA20
bne after_t20_check
t20_errata:
# Tegra20 is a Cortex-A9 r1p1
mrc p15, 0, r0, c1, c0, 0 @ read system control register
orr r0, r0, #1 << 14 @ erratum 716044
mcr p15, 0, r0, c1, c0, 0 @ write system control register
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
orr r0, r0, #1 << 4 @ erratum 742230
orr r0, r0, #1 << 11 @ erratum 751472
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
b after_errata
after_t20_check:
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
t30_check:
cmp r6, #TEGRA30
bne after_t30_check
t30_errata:
# Tegra30 is a Cortex-A9 r2p9
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
orr r0, r0, #1 << 6 @ erratum 743622
orr r0, r0, #1 << 11 @ erratum 751472
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
b after_errata
after_t30_check:
#endif
after_errata:
mrc p15, 0, r10, c0, c0, 5 @ MPIDR
and r10, r10, #0x3 @ R10 = CPU number
mov r11, #1
mov r11, r11, lsl r10 @ R11 = CPU mask
adr r12, __tegra_cpu_reset_handler_data
#ifdef CONFIG_SMP
/* Does the OS know about this CPU? */
ldr r7, [r12, #RESET_DATA(MASK_PRESENT)]
tst r7, r11 @ if !present
bleq __die @ CPU not present (to OS)
#endif
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
cmp r6, #TEGRA20
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
mov32 r5, TEGRA_PMC_BASE
mov r0, #0
cmp r10, #0
strne r0, [r5, #PMC_SCRATCH41]
1:
#endif
/* Waking up from LP1? */
ldr r8, [r12, #RESET_DATA(MASK_LP1)]
tst r8, r11 @ if in_lp1
beq __is_not_lp1
cmp r10, #0
bne __die @ only CPU0 can be here
ldr lr, [r12, #RESET_DATA(STARTUP_LP1)]
cmp lr, #0
bleq __die @ no LP1 startup handler
THUMB( add lr, lr, #1 ) @ switch to Thumb mode
bx lr
__is_not_lp1:
/* Waking up from LP2? */
ldr r9, [r12, #RESET_DATA(MASK_LP2)]
tst r9, r11 @ if in_lp2
beq __is_not_lp2
ldr lr, [r12, #RESET_DATA(STARTUP_LP2)]
cmp lr, #0
bleq __die @ no LP2 startup handler
bx lr
__is_not_lp2:
#ifdef CONFIG_SMP
/*
* Can only be secondary boot (initial or hotplug)
* CPU0 can't be here for Tegra20/30
*/
cmp r6, #TEGRA114
beq __no_cpu0_chk
cmp r10, #0
bleq __die @ CPU0 cannot be here
__no_cpu0_chk:
ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
cmp lr, #0
bleq __die @ no secondary startup handler
bx lr
#endif
/*
* We don't know why the CPU reset. Just kill it.
* The LR register will contain the address we died at + 4.
*/
__die:
sub lr, lr, #4
mov32 r7, TEGRA_PMC_BASE
str lr, [r7, #PMC_SCRATCH41]
mov32 r7, TEGRA_CLK_RESET_BASE
/* Are we on Tegra20? */
cmp r6, #TEGRA20
bne 1f
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
mov32 r0, 0x1111
mov r1, r0, lsl r10
str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET
#endif
1:
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
mov32 r6, TEGRA_FLOW_CTRL_BASE
cmp r10, #0
moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS
moveq r2, #FLOW_CTRL_CPU0_CSR
movne r1, r10, lsl #3
addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
/* Clear CPU "event" and "interrupt" flags and power gate
it when halting but not before it is in the "WFI" state. */
ldr r0, [r6, +r2]
orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
orr r0, r0, #FLOW_CTRL_CSR_ENABLE
str r0, [r6, +r2]
/* Unconditionally halt this CPU */
mov r0, #FLOW_CTRL_WAITEVENT
str r0, [r6, +r1]
ldr r0, [r6, +r1] @ memory barrier
dsb
isb
wfi @ CPU should be power gated here
/* If the CPU didn't power gate above just kill it's clock. */
mov r0, r11, lsl #8
str r0, [r7, #348] @ CLK_CPU_CMPLX_SET
#endif
/* If the CPU still isn't dead, just spin here. */
b .
ENDPROC(__tegra_cpu_reset_handler)
.align L1_CACHE_SHIFT
.type __tegra_cpu_reset_handler_data, %object
.globl __tegra_cpu_reset_handler_data
__tegra_cpu_reset_handler_data:
.rept TEGRA_RESET_DATA_SIZE
.long 0
.endr
.align L1_CACHE_SHIFT
ENTRY(__tegra_cpu_reset_handler_end)