| // Copyright (c) 2006, Google Inc. |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following disclaimer |
| // in the documentation and/or other materials provided with the |
| // distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| // --- |
| // Author: Ray Sidney |
| // Revamped and reorganized by Craig Silverstein |
| // |
| // This file contains code for handling the 'reporting' flags. These |
| // are flags that, when present, cause the program to report some |
| // information and then exit. --help and --version are the canonical |
| // reporting flags, but we also have flags like --helpxml, etc. |
| // |
| // There's only one function that's meant to be called externally: |
| // HandleCommandLineHelpFlags(). (Well, actually, ShowUsageWithFlags(), |
| // ShowUsageWithFlagsRestrict(), and DescribeOneFlag() can be called |
| // externally too, but there's little need for it.) These are all |
| // declared in the main commandlineflags.h header file. |
| // |
| // HandleCommandLineHelpFlags() will check what 'reporting' flags have |
| // been defined, if any -- the "help" part of the function name is a |
| // bit misleading -- and do the relevant reporting. It should be |
| // called after all flag-values have been assigned, that is, after |
| // parsing the command-line. |
| |
| #include "config.h" |
| #include <stdio.h> |
| #include <string.h> |
| #include <ctype.h> |
| #include <assert.h> |
| #include <string> |
| #include <vector> |
| #include <gflags/gflags.h> |
| #include <gflags/gflags_completions.h> |
| |
| #ifndef PATH_SEPARATOR |
| #define PATH_SEPARATOR '/' |
| #endif |
| |
| // The 'reporting' flags. They all call exit(). |
| DEFINE_bool(help, false, |
| "show help on all flags [tip: all flags can have two dashes]"); |
| DEFINE_bool(helpfull, false, |
| "show help on all flags -- same as -help"); |
| DEFINE_bool(helpshort, false, |
| "show help on only the main module for this program"); |
| DEFINE_string(helpon, "", |
| "show help on the modules named by this flag value"); |
| DEFINE_string(helpmatch, "", |
| "show help on modules whose name contains the specified substr"); |
| DEFINE_bool(helppackage, false, |
| "show help on all modules in the main package"); |
| DEFINE_bool(helpxml, false, |
| "produce an xml version of help"); |
| DEFINE_bool(version, false, |
| "show version and build info and exit"); |
| |
| _START_GOOGLE_NAMESPACE_ |
| |
| using std::string; |
| using std::vector; |
| |
| // -------------------------------------------------------------------- |
| // DescribeOneFlag() |
| // DescribeOneFlagInXML() |
| // Routines that pretty-print info about a flag. These use |
| // a CommandLineFlagInfo, which is the way the commandlineflags |
| // API exposes static info about a flag. |
| // -------------------------------------------------------------------- |
| |
| static const int kLineLength = 80; |
| |
| static void AddString(const string& s, |
| string* final_string, int* chars_in_line) { |
| const int slen = static_cast<int>(s.length()); |
| if (*chars_in_line + 1 + slen >= kLineLength) { // < 80 chars/line |
| *final_string += "\n "; |
| *chars_in_line = 6; |
| } else { |
| *final_string += " "; |
| *chars_in_line += 1; |
| } |
| *final_string += s; |
| *chars_in_line += slen; |
| } |
| |
| static string PrintStringFlagsWithQuotes(const CommandLineFlagInfo& flag, |
| const string& text, bool current) { |
| const char* c_string = (current ? flag.current_value.c_str() : |
| flag.default_value.c_str()); |
| if (strcmp(flag.type.c_str(), "string") == 0) { // add quotes for strings |
| return text + ": \"" + c_string + "\""; |
| } else { |
| return text + ": " + c_string; |
| } |
| } |
| |
| // Create a descriptive string for a flag. |
| // Goes to some trouble to make pretty line breaks. |
| string DescribeOneFlag(const CommandLineFlagInfo& flag) { |
| string main_part = (string(" -") + flag.name + |
| " (" + flag.description + ')'); |
| const char* c_string = main_part.c_str(); |
| int chars_left = static_cast<int>(main_part.length()); |
| string final_string = ""; |
| int chars_in_line = 0; // how many chars in current line so far? |
| while (1) { |
| assert(chars_left == strlen(c_string)); // Unless there's a \0 in there? |
| const char* newline = strchr(c_string, '\n'); |
| if (newline == NULL && chars_in_line+chars_left < kLineLength) { |
| // The whole remainder of the string fits on this line |
| final_string += c_string; |
| chars_in_line += chars_left; |
| break; |
| } |
| if (newline != NULL && newline - c_string < kLineLength - chars_in_line) { |
| int n = static_cast<int>(newline - c_string); |
| final_string.append(c_string, n); |
| chars_left -= n + 1; |
| c_string += n + 1; |
| } else { |
| // Find the last whitespace on this 80-char line |
| int whitespace = kLineLength-chars_in_line-1; // < 80 chars/line |
| while ( whitespace > 0 && !isspace(c_string[whitespace]) ) { |
| --whitespace; |
| } |
| if (whitespace <= 0) { |
| // Couldn't find any whitespace to make a line break. Just dump the |
| // rest out! |
| final_string += c_string; |
| chars_in_line = kLineLength; // next part gets its own line for sure! |
| break; |
| } |
| final_string += string(c_string, whitespace); |
| chars_in_line += whitespace; |
| while (isspace(c_string[whitespace])) ++whitespace; |
| c_string += whitespace; |
| chars_left -= whitespace; |
| } |
| if (*c_string == '\0') |
| break; |
| final_string += "\n "; |
| chars_in_line = 6; |
| } |
| |
| // Append data type |
| AddString(string("type: ") + flag.type, &final_string, &chars_in_line); |
| // The listed default value will be the actual default from the flag |
| // definition in the originating source file, unless the value has |
| // subsequently been modified using SetCommandLineOptionWithMode() with mode |
| // SET_FLAGS_DEFAULT, or by setting FLAGS_foo = bar before initializing. |
| AddString(PrintStringFlagsWithQuotes(flag, "default", false), &final_string, |
| &chars_in_line); |
| if (!flag.is_default) { |
| AddString(PrintStringFlagsWithQuotes(flag, "currently", true), |
| &final_string, &chars_in_line); |
| } |
| |
| final_string += '\n'; |
| return final_string; |
| } |
| |
| // Simple routine to xml-escape a string: escape & and < only. |
| static string XMLText(const string& txt) { |
| string ans = txt; |
| for (string::size_type pos = 0; (pos = ans.find("&", pos)) != string::npos; ) |
| ans.replace(pos++, 1, "&"); |
| for (string::size_type pos = 0; (pos = ans.find("<", pos)) != string::npos; ) |
| ans.replace(pos++, 1, "<"); |
| return ans; |
| } |
| |
| static void AddXMLTag(string* r, const char* tag, const string& txt) { |
| *r += ('<'); |
| *r += (tag); |
| *r += ('>'); |
| *r += (XMLText(txt)); |
| *r += ("</"); |
| *r += (tag); |
| *r += ('>'); |
| } |
| |
| static string DescribeOneFlagInXML(const CommandLineFlagInfo& flag) { |
| // The file and flagname could have been attributes, but default |
| // and meaning need to avoid attribute normalization. This way it |
| // can be parsed by simple programs, in addition to xml parsers. |
| string r("<flag>"); |
| AddXMLTag(&r, "file", flag.filename); |
| AddXMLTag(&r, "name", flag.name); |
| AddXMLTag(&r, "meaning", flag.description); |
| AddXMLTag(&r, "default", flag.default_value); |
| AddXMLTag(&r, "current", flag.current_value); |
| AddXMLTag(&r, "type", flag.type); |
| r += "</flag>"; |
| return r; |
| } |
| |
| // -------------------------------------------------------------------- |
| // ShowUsageWithFlags() |
| // ShowUsageWithFlagsRestrict() |
| // ShowXMLOfFlags() |
| // These routines variously expose the registry's list of flag |
| // values. ShowUsage*() prints the flag-value information |
| // to stdout in a user-readable format (that's what --help uses). |
| // The Restrict() version limits what flags are shown. |
| // ShowXMLOfFlags() prints the flag-value information to stdout |
| // in a machine-readable format. In all cases, the flags are |
| // sorted: first by filename they are defined in, then by flagname. |
| // -------------------------------------------------------------------- |
| |
| static const char* Basename(const char* filename) { |
| const char* sep = strrchr(filename, PATH_SEPARATOR); |
| return sep ? sep + 1 : filename; |
| } |
| |
| static string Dirname(const string& filename) { |
| string::size_type sep = filename.rfind(PATH_SEPARATOR); |
| return filename.substr(0, (sep == string::npos) ? 0 : sep); |
| } |
| |
| // Test whether a filename contains at least one of the substrings. |
| static bool FileMatchesSubstring(const string& filename, |
| const vector<string>& substrings) { |
| for (vector<string>::const_iterator target = substrings.begin(); |
| target != substrings.end(); |
| ++target) { |
| if (strstr(filename.c_str(), target->c_str()) != NULL) |
| return true; |
| // If the substring starts with a '/', that means that we want |
| // the string to be at the beginning of a directory component. |
| // That should match the first directory component as well, so |
| // we allow '/foo' to match a filename of 'foo'. |
| if (!target->empty() && (*target)[0] == '/' && |
| strncmp(filename.c_str(), target->c_str() + 1, |
| strlen(target->c_str() + 1)) == 0) |
| return true; |
| } |
| return false; |
| } |
| |
| // Show help for every filename which matches any of the target substrings. |
| // If substrings is empty, shows help for every file. If a flag's help message |
| // has been stripped (e.g. by adding '#define STRIP_FLAG_HELP 1' before |
| // including gflags/gflags.h), then this flag will not be displayed by |
| // '--help' and its variants. |
| static void ShowUsageWithFlagsMatching(const char *argv0, |
| const vector<string> &substrings) { |
| fprintf(stdout, "%s: %s\n", Basename(argv0), ProgramUsage()); |
| |
| vector<CommandLineFlagInfo> flags; |
| GetAllFlags(&flags); // flags are sorted by filename, then flagname |
| |
| string last_filename; // so we know when we're at a new file |
| bool first_directory = true; // controls blank lines between dirs |
| bool found_match = false; // stays false iff no dir matches restrict |
| for (vector<CommandLineFlagInfo>::const_iterator flag = flags.begin(); |
| flag != flags.end(); |
| ++flag) { |
| if (substrings.empty() || |
| FileMatchesSubstring(flag->filename, substrings)) { |
| // If the flag has been stripped, pretend that it doesn't exist. |
| if (flag->description == kStrippedFlagHelp) continue; |
| found_match = true; // this flag passed the match! |
| if (flag->filename != last_filename) { // new file |
| if (Dirname(flag->filename) != Dirname(last_filename)) { // new dir! |
| if (!first_directory) |
| fprintf(stdout, "\n\n"); // put blank lines between directories |
| first_directory = false; |
| } |
| fprintf(stdout, "\n Flags from %s:\n", flag->filename.c_str()); |
| last_filename = flag->filename; |
| } |
| // Now print this flag |
| fprintf(stdout, "%s", DescribeOneFlag(*flag).c_str()); |
| } |
| } |
| if (!found_match && !substrings.empty()) { |
| fprintf(stdout, "\n No modules matched: use -help\n"); |
| } |
| } |
| |
| void ShowUsageWithFlagsRestrict(const char *argv0, const char *restrict) { |
| vector<string> substrings; |
| if (restrict != NULL && *restrict != '\0') { |
| substrings.push_back(restrict); |
| } |
| ShowUsageWithFlagsMatching(argv0, substrings); |
| } |
| |
| void ShowUsageWithFlags(const char *argv0) { |
| ShowUsageWithFlagsRestrict(argv0, ""); |
| } |
| |
| // Convert the help, program, and usage to xml. |
| static void ShowXMLOfFlags(const char *prog_name) { |
| vector<CommandLineFlagInfo> flags; |
| GetAllFlags(&flags); // flags are sorted: by filename, then flagname |
| |
| // XML. There is no corresponding schema yet |
| fprintf(stdout, "<?xml version=\"1.0\"?>\n"); |
| // The document |
| fprintf(stdout, "<AllFlags>\n"); |
| // the program name and usage |
| fprintf(stdout, "<program>%s</program>\n", |
| XMLText(Basename(prog_name)).c_str()); |
| fprintf(stdout, "<usage>%s</usage>\n", |
| XMLText(ProgramUsage()).c_str()); |
| // All the flags |
| for (vector<CommandLineFlagInfo>::const_iterator flag = flags.begin(); |
| flag != flags.end(); |
| ++flag) { |
| if (flag->description != kStrippedFlagHelp) |
| fprintf(stdout, "%s\n", DescribeOneFlagInXML(*flag).c_str()); |
| } |
| // The end of the document |
| fprintf(stdout, "</AllFlags>\n"); |
| } |
| |
| // -------------------------------------------------------------------- |
| // ShowVersion() |
| // Called upon --version. Prints build-related info. |
| // -------------------------------------------------------------------- |
| |
| static void ShowVersion() { |
| fprintf(stdout, "%s\n", ProgramInvocationShortName()); |
| // TODO: add other stuff, like a timestamp, who built it, what |
| // target they built, etc. |
| |
| # if !defined(NDEBUG) |
| fprintf(stdout, "Debug build (NDEBUG not #defined)\n"); |
| # endif |
| } |
| |
| static void AppendPrognameStrings(vector<string>* substrings, |
| const char* progname) { |
| string r("/"); |
| r += progname; |
| substrings->push_back(r + "."); |
| substrings->push_back(r + "-main."); |
| substrings->push_back(r + "_main."); |
| } |
| |
| // -------------------------------------------------------------------- |
| // HandleCommandLineHelpFlags() |
| // Checks all the 'reporting' commandline flags to see if any |
| // have been set. If so, handles them appropriately. Note |
| // that all of them, by definition, cause the program to exit |
| // if they trigger. |
| // -------------------------------------------------------------------- |
| |
| void HandleCommandLineHelpFlags() { |
| const char* progname = ProgramInvocationShortName(); |
| extern void (*commandlineflags_exitfunc)(int); // in gflags.cc |
| |
| HandleCommandLineCompletions(); |
| |
| vector<string> substrings; |
| AppendPrognameStrings(&substrings, progname); |
| |
| if (FLAGS_helpshort) { |
| // show only flags related to this binary: |
| // E.g. for fileutil.cc, want flags containing ... "/fileutil." cc |
| ShowUsageWithFlagsMatching(progname, substrings); |
| commandlineflags_exitfunc(1); // almost certainly exit() |
| |
| } else if (FLAGS_help || FLAGS_helpfull) { |
| // show all options |
| ShowUsageWithFlagsRestrict(progname, ""); // empty restrict |
| commandlineflags_exitfunc(1); |
| |
| } else if (!FLAGS_helpon.empty()) { |
| string restrict = "/" + FLAGS_helpon + "."; |
| ShowUsageWithFlagsRestrict(progname, restrict.c_str()); |
| commandlineflags_exitfunc(1); |
| |
| } else if (!FLAGS_helpmatch.empty()) { |
| ShowUsageWithFlagsRestrict(progname, FLAGS_helpmatch.c_str()); |
| commandlineflags_exitfunc(1); |
| |
| } else if (FLAGS_helppackage) { |
| // Shows help for all files in the same directory as main(). We |
| // don't want to resort to looking at dirname(progname), because |
| // the user can pick progname, and it may not relate to the file |
| // where main() resides. So instead, we search the flags for a |
| // filename like "/progname.cc", and take the dirname of that. |
| vector<CommandLineFlagInfo> flags; |
| GetAllFlags(&flags); |
| string last_package; |
| for (vector<CommandLineFlagInfo>::const_iterator flag = flags.begin(); |
| flag != flags.end(); |
| ++flag) { |
| if (!FileMatchesSubstring(flag->filename, substrings)) |
| continue; |
| const string package = Dirname(flag->filename) + "/"; |
| if (package != last_package) { |
| ShowUsageWithFlagsRestrict(progname, package.c_str()); |
| if (!last_package.empty()) { // means this isn't our first pkg |
| fprintf(stderr, "WARNING: Multiple packages contain a file=%s\n", |
| progname); |
| } |
| last_package = package; |
| } |
| } |
| if (last_package.empty()) { // never found a package to print |
| fprintf(stderr, "WARNING: Unable to find a package for file=%s\n", |
| progname); |
| } |
| commandlineflags_exitfunc(1); |
| |
| } else if (FLAGS_helpxml) { |
| ShowXMLOfFlags(progname); |
| commandlineflags_exitfunc(1); |
| |
| } else if (FLAGS_version) { |
| ShowVersion(); |
| // Unlike help, we may be asking for version in a script, so return 0 |
| commandlineflags_exitfunc(0); |
| } |
| } |
| |
| _END_GOOGLE_NAMESPACE_ |