| /***************************************************************************/ |
| /* */ |
| /* ftstroke.h */ |
| /* */ |
| /* FreeType path stroker (specification). */ |
| /* */ |
| /* Copyright 2002, 2003, 2004, 2005, 2006 by */ |
| /* David Turner, Robert Wilhelm, and Werner Lemberg. */ |
| /* */ |
| /* This file is part of the FreeType project, and may only be used, */ |
| /* modified, and distributed under the terms of the FreeType project */ |
| /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ |
| /* this file you indicate that you have read the license and */ |
| /* understand and accept it fully. */ |
| /* */ |
| /***************************************************************************/ |
| |
| |
| #ifndef __FT_STROKE_H__ |
| #define __FT_STROKE_H__ |
| |
| #include <ft2build.h> |
| #include FT_OUTLINE_H |
| #include FT_GLYPH_H |
| |
| |
| FT_BEGIN_HEADER |
| |
| |
| /************************************************************************ |
| * |
| * @section: |
| * glyph_stroker |
| * |
| * @title: |
| * Glyph Stroker |
| * |
| * @abstract: |
| * Generating bordered and stroked glyphs. |
| * |
| * @description: |
| * This component generates stroked outlines of a given vectorial |
| * glyph. It also allows you to retrieve the `outside' and/or the |
| * `inside' borders of the stroke. |
| * |
| * This can be useful to generate `bordered' glyph, i.e., glyphs |
| * displayed with a coloured (and anti-aliased) border around their |
| * shape. |
| */ |
| |
| |
| /************************************************************** |
| * |
| * @type: |
| * FT_Stroker |
| * |
| * @description: |
| * Opaque handler to a path stroker object. |
| */ |
| typedef struct FT_StrokerRec_* FT_Stroker; |
| |
| |
| /************************************************************** |
| * |
| * @enum: |
| * FT_Stroker_LineJoin |
| * |
| * @description: |
| * These values determine how two joining lines are rendered |
| * in a stroker. |
| * |
| * @values: |
| * FT_STROKER_LINEJOIN_ROUND :: |
| * Used to render rounded line joins. Circular arcs are used |
| * to join two lines smoothly. |
| * |
| * FT_STROKER_LINEJOIN_BEVEL :: |
| * Used to render beveled line joins; i.e., the two joining lines |
| * are extended until they intersect. |
| * |
| * FT_STROKER_LINEJOIN_MITER :: |
| * Same as beveled rendering, except that an additional line |
| * break is added if the angle between the two joining lines |
| * is too closed (this is useful to avoid unpleasant spikes |
| * in beveled rendering). |
| */ |
| typedef enum |
| { |
| FT_STROKER_LINEJOIN_ROUND = 0, |
| FT_STROKER_LINEJOIN_BEVEL, |
| FT_STROKER_LINEJOIN_MITER |
| |
| } FT_Stroker_LineJoin; |
| |
| |
| /************************************************************** |
| * |
| * @enum: |
| * FT_Stroker_LineCap |
| * |
| * @description: |
| * These values determine how the end of opened sub-paths are |
| * rendered in a stroke. |
| * |
| * @values: |
| * FT_STROKER_LINECAP_BUTT :: |
| * The end of lines is rendered as a full stop on the last |
| * point itself. |
| * |
| * FT_STROKER_LINECAP_ROUND :: |
| * The end of lines is rendered as a half-circle around the |
| * last point. |
| * |
| * FT_STROKER_LINECAP_SQUARE :: |
| * The end of lines is rendered as a square around the |
| * last point. |
| */ |
| typedef enum |
| { |
| FT_STROKER_LINECAP_BUTT = 0, |
| FT_STROKER_LINECAP_ROUND, |
| FT_STROKER_LINECAP_SQUARE |
| |
| } FT_Stroker_LineCap; |
| |
| |
| /************************************************************** |
| * |
| * @enum: |
| * FT_StrokerBorder |
| * |
| * @description: |
| * These values are used to select a given stroke border |
| * in @FT_Stroker_GetBorderCounts and @FT_Stroker_ExportBorder. |
| * |
| * @values: |
| * FT_STROKER_BORDER_LEFT :: |
| * Select the left border, relative to the drawing direction. |
| * |
| * FT_STROKER_BORDER_RIGHT :: |
| * Select the right border, relative to the drawing direction. |
| * |
| * @note: |
| * Applications are generally interested in the `inside' and `outside' |
| * borders. However, there is no direct mapping between these and the |
| * `left' and `right' ones, since this really depends on the glyph's |
| * drawing orientation, which varies between font formats. |
| * |
| * You can however use @FT_Outline_GetInsideBorder and |
| * @FT_Outline_GetOutsideBorder to get these. |
| */ |
| typedef enum |
| { |
| FT_STROKER_BORDER_LEFT = 0, |
| FT_STROKER_BORDER_RIGHT |
| |
| } FT_StrokerBorder; |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Outline_GetInsideBorder |
| * |
| * @description: |
| * Retrieve the @FT_StrokerBorder value corresponding to the |
| * `inside' borders of a given outline. |
| * |
| * @input: |
| * outline :: |
| * The source outline handle. |
| * |
| * @return: |
| * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid |
| * outlines. |
| */ |
| FT_EXPORT( FT_StrokerBorder ) |
| FT_Outline_GetInsideBorder( FT_Outline* outline ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Outline_GetOutsideBorder |
| * |
| * @description: |
| * Retrieve the @FT_StrokerBorder value corresponding to the |
| * `outside' borders of a given outline. |
| * |
| * @input: |
| * outline :: |
| * The source outline handle. |
| * |
| * @return: |
| * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid |
| * outlines. |
| */ |
| FT_EXPORT( FT_StrokerBorder ) |
| FT_Outline_GetOutsideBorder( FT_Outline* outline ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_New |
| * |
| * @description: |
| * Create a new stroker object. |
| * |
| * @input: |
| * library :: |
| * FreeType library handle. |
| * |
| * @output: |
| * astroker :: |
| * A new stroker object handle. NULL in case of error. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_New( FT_Library library, |
| FT_Stroker *astroker ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_Set |
| * |
| * @description: |
| * Reset a stroker object's attributes. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * radius :: |
| * The border radius. |
| * |
| * line_cap :: |
| * The line cap style. |
| * |
| * line_join :: |
| * The line join style. |
| * |
| * miter_limit :: |
| * The miter limit for the FT_STROKER_LINEJOIN_MITER style, |
| * expressed as 16.16 fixed point value. |
| * |
| * @note: |
| * The radius is expressed in the same units that the outline |
| * coordinates. |
| */ |
| FT_EXPORT( void ) |
| FT_Stroker_Set( FT_Stroker stroker, |
| FT_Fixed radius, |
| FT_Stroker_LineCap line_cap, |
| FT_Stroker_LineJoin line_join, |
| FT_Fixed miter_limit ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_Rewind |
| * |
| * @description: |
| * Reset a stroker object without changing its attributes. |
| * You should call this function before beginning a new |
| * series of calls to @FT_Stroker_BeginSubPath or |
| * @FT_Stroker_EndSubPath. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| */ |
| FT_EXPORT( void ) |
| FT_Stroker_Rewind( FT_Stroker stroker ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_ParseOutline |
| * |
| * @description: |
| * A convenience function used to parse a whole outline with |
| * the stroker. The resulting outline(s) can be retrieved |
| * later by functions like @FT_Stroker_GetCounts and @FT_Stroker_Export. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * outline :: |
| * The source outline. |
| * |
| * opened :: |
| * A boolean. If 1, the outline is treated as an open path instead |
| * of a closed one. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * If `opened' is 0 (the default), the outline is treated as a closed |
| * path, and the stroker will generate two distinct `border' outlines. |
| * |
| * If `opened' is 1, the outline is processed as an open path, and the |
| * stroker will generate a single `stroke' outline. |
| * |
| * This function calls @FT_Stroker_Rewind automatically. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_ParseOutline( FT_Stroker stroker, |
| FT_Outline* outline, |
| FT_Bool opened ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_BeginSubPath |
| * |
| * @description: |
| * Start a new sub-path in the stroker. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * to :: |
| * A pointer to the start vector. |
| * |
| * open :: |
| * A boolean. If 1, the sub-path is treated as an open one. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * This function is useful when you need to stroke a path that is |
| * not stored as an @FT_Outline object. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_BeginSubPath( FT_Stroker stroker, |
| FT_Vector* to, |
| FT_Bool open ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_EndSubPath |
| * |
| * @description: |
| * Close the current sub-path in the stroker. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * You should call this function after @FT_Stroker_BeginSubPath. |
| * If the subpath was not `opened', this function will `draw' a |
| * single line segment to the start position when needed. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_EndSubPath( FT_Stroker stroker ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_LineTo |
| * |
| * @description: |
| * `Draw' a single line segment in the stroker's current sub-path, |
| * from the last position. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * to :: |
| * A pointer to the destination point. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * You should call this function between @FT_Stroker_BeginSubPath and |
| * @FT_Stroker_EndSubPath. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_LineTo( FT_Stroker stroker, |
| FT_Vector* to ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_ConicTo |
| * |
| * @description: |
| * `Draw' a single quadratic Bézier in the stroker's current sub-path, |
| * from the last position. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * control :: |
| * A pointer to a Bézier control point. |
| * |
| * to :: |
| * A pointer to the destination point. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * You should call this function between @FT_Stroker_BeginSubPath and |
| * @FT_Stroker_EndSubPath. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_ConicTo( FT_Stroker stroker, |
| FT_Vector* control, |
| FT_Vector* to ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_CubicTo |
| * |
| * @description: |
| * `Draw' a single cubic Bézier in the stroker's current sub-path, |
| * from the last position. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * control1 :: |
| * A pointer to the first Bézier control point. |
| * |
| * control2 :: |
| * A pointer to second Bézier control point. |
| * |
| * to :: |
| * A pointer to the destination point. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * You should call this function between @FT_Stroker_BeginSubPath and |
| * @FT_Stroker_EndSubPath. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_CubicTo( FT_Stroker stroker, |
| FT_Vector* control1, |
| FT_Vector* control2, |
| FT_Vector* to ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_GetBorderCounts |
| * |
| * @description: |
| * Call this function once you have finished parsing your paths |
| * with the stroker. It will return the number of points and |
| * contours necessary to export one of the `border' or `stroke' |
| * outlines generated by the stroker. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * border :: |
| * The border index. |
| * |
| * @output: |
| * anum_points :: |
| * The number of points. |
| * |
| * anum_contours :: |
| * The number of contours. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * When an outline, or a sub-path, is `closed', the stroker generates |
| * two independent `border' outlines, named `left' and `right'. |
| * |
| * When the outline, or a sub-path, is `opened', the stroker merges |
| * the `border' outlines with caps. The `left' border receives all |
| * points, while the `right' border becomes empty. |
| * |
| * Use the function @FT_Stroker_GetCounts instead if you want to |
| * retrieve the counts associated to both borders. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_GetBorderCounts( FT_Stroker stroker, |
| FT_StrokerBorder border, |
| FT_UInt *anum_points, |
| FT_UInt *anum_contours ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_ExportBorder |
| * |
| * @description: |
| * Call this function after @FT_Stroker_GetBorderCounts to |
| * export the corresponding border to your own @FT_Outline |
| * structure. |
| * |
| * Note that this function will append the border points and |
| * contours to your outline, but will not try to resize its |
| * arrays. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * border :: |
| * The border index. |
| * |
| * outline :: |
| * The target outline handle. |
| * |
| * @note: |
| * Always call this function after @FT_Stroker_GetBorderCounts to |
| * get sure that there is enough room in your @FT_Outline object to |
| * receive all new data. |
| * |
| * When an outline, or a sub-path, is `closed', the stroker generates |
| * two independent `border' outlines, named `left' and `right' |
| * |
| * When the outline, or a sub-path, is `opened', the stroker merges |
| * the `border' outlines with caps. The `left' border receives all |
| * points, while the `right' border becomes empty. |
| * |
| * Use the function @FT_Stroker_Export instead if you want to |
| * retrieve all borders at once. |
| */ |
| FT_EXPORT( void ) |
| FT_Stroker_ExportBorder( FT_Stroker stroker, |
| FT_StrokerBorder border, |
| FT_Outline* outline ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_GetCounts |
| * |
| * @description: |
| * Call this function once you have finished parsing your paths |
| * with the stroker. It returns the number of points and |
| * contours necessary to export all points/borders from the stroked |
| * outline/path. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * @output: |
| * anum_points :: |
| * The number of points. |
| * |
| * anum_contours :: |
| * The number of contours. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Stroker_GetCounts( FT_Stroker stroker, |
| FT_UInt *anum_points, |
| FT_UInt *anum_contours ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_Export |
| * |
| * @description: |
| * Call this function after @FT_Stroker_GetBorderCounts to |
| * export the all borders to your own @FT_Outline structure. |
| * |
| * Note that this function will append the border points and |
| * contours to your outline, but will not try to resize its |
| * arrays. |
| * |
| * @input: |
| * stroker :: |
| * The target stroker handle. |
| * |
| * outline :: |
| * The target outline handle. |
| */ |
| FT_EXPORT( void ) |
| FT_Stroker_Export( FT_Stroker stroker, |
| FT_Outline* outline ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Stroker_Done |
| * |
| * @description: |
| * Destroy a stroker object. |
| * |
| * @input: |
| * stroker :: |
| * A stroker handle. Can be NULL. |
| */ |
| FT_EXPORT( void ) |
| FT_Stroker_Done( FT_Stroker stroker ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Glyph_Stroke |
| * |
| * @description: |
| * Stroke a given outline glyph object with a given stroker. |
| * |
| * @inout: |
| * pglyph :: |
| * Source glyph handle on input, new glyph handle on output. |
| * |
| * @input: |
| * stroker :: |
| * A stroker handle. |
| * |
| * destroy :: |
| * A Boolean. If 1, the source glyph object is destroyed |
| * on success. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * The source glyph is untouched in case of error. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Glyph_Stroke( FT_Glyph *pglyph, |
| FT_Stroker stroker, |
| FT_Bool destroy ); |
| |
| |
| /************************************************************** |
| * |
| * @function: |
| * FT_Glyph_StrokeBorder |
| * |
| * @description: |
| * Stroke a given outline glyph object with a given stroker, but |
| * only return either its inside or outside border. |
| * |
| * @inout: |
| * pglyph :: |
| * Source glyph handle on input, new glyph handle on output. |
| * |
| * @input: |
| * stroker :: |
| * A stroker handle. |
| * |
| * inside :: |
| * A Boolean. If 1, return the inside border, otherwise |
| * the outside border. |
| * |
| * destroy :: |
| * A Boolean. If 1, the source glyph object is destroyed |
| * on success. |
| * |
| * @return: |
| * FreeType error code. 0 means success. |
| * |
| * @note: |
| * The source glyph is untouched in case of error. |
| */ |
| FT_EXPORT( FT_Error ) |
| FT_Glyph_StrokeBorder( FT_Glyph *pglyph, |
| FT_Stroker stroker, |
| FT_Bool inside, |
| FT_Bool destroy ); |
| |
| /* */ |
| |
| FT_END_HEADER |
| |
| #endif /* __FT_STROKE_H__ */ |
| |
| |
| /* END */ |
| |
| |
| /* Local Variables: */ |
| /* coding: utf-8 */ |
| /* End: */ |
