| /******************************************************************************* |
| |
| Intel(R) Gigabit Ethernet Linux driver |
| Copyright(c) 2007-2012 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| |
| /* glue for the OS independent part of e1000 |
| * includes register access macros |
| */ |
| |
| #ifndef _E1000_OSDEP_H_ |
| #define _E1000_OSDEP_H_ |
| |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/if_ether.h> |
| #include <linux/sched.h> |
| #include "kcompat.h" |
| |
| #define usec_delay(x) udelay(x) |
| #ifndef msec_delay |
| #define msec_delay(x) do { \ |
| /* Don't mdelay in interrupt context! */ \ |
| if (in_interrupt()) \ |
| BUG(); \ |
| else \ |
| msleep(x); \ |
| } while (0) |
| |
| /* Some workarounds require millisecond delays and are run during interrupt |
| * context. Most notably, when establishing link, the phy may need tweaking |
| * but cannot process phy register reads/writes faster than millisecond |
| * intervals...and we establish link due to a "link status change" interrupt. |
| */ |
| #define msec_delay_irq(x) mdelay(x) |
| #endif |
| |
| #define PCI_COMMAND_REGISTER PCI_COMMAND |
| #define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE |
| #define ETH_ADDR_LEN ETH_ALEN |
| |
| #ifdef __BIG_ENDIAN |
| #define E1000_BIG_ENDIAN __BIG_ENDIAN |
| #endif |
| |
| |
| #ifdef DEBUG |
| #define DEBUGOUT(S) printk(KERN_DEBUG S) |
| #define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A) |
| #else |
| #define DEBUGOUT(S) |
| #define DEBUGOUT1(S, A...) |
| #endif |
| |
| #ifdef DEBUG_FUNC |
| #define DEBUGFUNC(F) DEBUGOUT(F "\n") |
| #else |
| #define DEBUGFUNC(F) |
| #endif |
| #define DEBUGOUT2 DEBUGOUT1 |
| #define DEBUGOUT3 DEBUGOUT2 |
| #define DEBUGOUT7 DEBUGOUT3 |
| |
| #define E1000_REGISTER(a, reg) reg |
| |
| #define E1000_WRITE_REG(a, reg, value) ( \ |
| writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg)))) |
| |
| #define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg))) |
| |
| #define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \ |
| writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))) |
| |
| #define E1000_READ_REG_ARRAY(a, reg, offset) ( \ |
| readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))) |
| |
| #define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY |
| #define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY |
| |
| #define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ |
| writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))) |
| |
| #define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ |
| readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))) |
| |
| #define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ |
| writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))) |
| |
| #define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ |
| readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))) |
| |
| #define E1000_WRITE_REG_IO(a, reg, offset) do { \ |
| outl(reg, ((a)->io_base)); \ |
| outl(offset, ((a)->io_base + 4)); } while (0) |
| |
| #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS) |
| |
| #define E1000_WRITE_FLASH_REG(a, reg, value) ( \ |
| writel((value), ((a)->flash_address + reg))) |
| |
| #define E1000_WRITE_FLASH_REG16(a, reg, value) ( \ |
| writew((value), ((a)->flash_address + reg))) |
| |
| #define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg)) |
| |
| #define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg)) |
| |
| #endif /* _E1000_OSDEP_H_ */ |