Add DATA_TEST_FRAME for testing Data frame processing on AP side
The new hostapd control interface command can be used in automated
testing to verify how AP processes Data frames with arbitrary contents.
This is enabled only in builds with CONFIG_TESTING_OPTIONS=y.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
diff --git a/hostapd/ctrl_iface.c b/hostapd/ctrl_iface.c
index 33cb8bc..14f128b 100644
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
@@ -1641,6 +1641,57 @@
return 0;
}
+
+static int hostapd_ctrl_iface_data_test_frame(struct hostapd_data *hapd,
+ char *cmd)
+{
+ u8 *buf;
+ struct ether_header *eth;
+ struct l2_packet_data *l2 = NULL;
+ size_t len;
+ u16 ethertype;
+ int res = -1;
+ const char *ifname = hapd->conf->iface;
+
+ if (os_strncmp(cmd, "ifname=", 7) == 0) {
+ cmd += 7;
+ ifname = cmd;
+ cmd = os_strchr(cmd, ' ');
+ if (cmd == NULL)
+ return -1;
+ *cmd++ = '\0';
+ }
+
+ len = os_strlen(cmd);
+ if (len & 1 || len < ETH_HLEN * 2)
+ return -1;
+ len /= 2;
+
+ buf = os_malloc(len);
+ if (buf == NULL)
+ return -1;
+
+ if (hexstr2bin(cmd, buf, len) < 0)
+ goto done;
+
+ eth = (struct ether_header *) buf;
+ ethertype = ntohs(eth->ether_type);
+
+ l2 = l2_packet_init(ifname, hapd->own_addr, ethertype,
+ hostapd_data_test_rx, hapd, 1);
+ if (l2 == NULL)
+ goto done;
+
+ res = l2_packet_send(l2, eth->ether_dhost, ethertype, buf, len);
+ wpa_dbg(hapd->msg_ctx, MSG_DEBUG, "test data: TX frame res=%d", res);
+done:
+ if (l2)
+ l2_packet_deinit(l2);
+ os_free(buf);
+
+ return res < 0 ? -1 : 0;
+}
+
#endif /* CONFIG_TESTING_OPTIONS */
@@ -1958,6 +2009,9 @@
} else if (os_strncmp(buf, "DATA_TEST_TX ", 13) == 0) {
if (hostapd_ctrl_iface_data_test_tx(hapd, buf + 13) < 0)
reply_len = -1;
+ } else if (os_strncmp(buf, "DATA_TEST_FRAME ", 16) == 0) {
+ if (hostapd_ctrl_iface_data_test_frame(hapd, buf + 16) < 0)
+ reply_len = -1;
#endif /* CONFIG_TESTING_OPTIONS */
} else if (os_strncmp(buf, "CHAN_SWITCH ", 12) == 0) {
if (hostapd_ctrl_iface_chan_switch(hapd->iface, buf + 12))
