| # cfg80211 connect command (SME in the driver/firmware) |
| # Copyright (c) 2013, Jouni Malinen <j@w1.fi> |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import logging |
| logger = logging.getLogger() |
| import time |
| |
| import hwsim_utils |
| import hostapd |
| from wpasupplicant import WpaSupplicant |
| from test_p2p_grpform import go_neg_pin_authorized |
| from test_p2p_grpform import check_grpform_results |
| from test_p2p_grpform import remove_group |
| |
| def test_connect_cmd_open(dev, apdev): |
| """Open connection using cfg80211 connect command""" |
| params = { "ssid": "sta-connect", |
| "manage_p2p": "1", |
| "allow_cross_connection": "1" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412", |
| bg_scan_period="1") |
| wpas.request("DISCONNECT") |
| |
| def test_connect_cmd_wep(dev, apdev): |
| """WEP Open System using cfg80211 connect command""" |
| params = { "ssid": "sta-connect-wep", "wep_key0": '"hello"' } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412", |
| wep_key0='"hello"') |
| hwsim_utils.test_connectivity(wpas, hapd) |
| wpas.request("DISCONNECT") |
| |
| def test_connect_cmd_wep_shared(dev, apdev): |
| """WEP Shared key using cfg80211 connect command""" |
| params = { "ssid": "sta-connect-wep", "wep_key0": '"hello"', |
| "auth_algs": "2" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| id = wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412", |
| auth_alg="SHARED", wep_key0='"hello"') |
| hwsim_utils.test_connectivity(wpas, hapd) |
| wpas.request("DISCONNECT") |
| wpas.remove_network(id) |
| wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412", |
| auth_alg="OPEN SHARED", wep_key0='"hello"') |
| hwsim_utils.test_connectivity(wpas, hapd) |
| wpas.request("DISCONNECT") |
| |
| def test_connect_cmd_p2p_management(dev, apdev): |
| """Open connection using cfg80211 connect command and AP using P2P management""" |
| params = { "ssid": "sta-connect", |
| "manage_p2p": "1", |
| "allow_cross_connection": "0" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412") |
| wpas.request("DISCONNECT") |
| |
| def test_connect_cmd_wpa2_psk(dev, apdev): |
| """WPA2-PSK connection using cfg80211 connect command""" |
| params = hostapd.wpa2_params(ssid="sta-connect", passphrase="12345678") |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect", psk="12345678", scan_freq="2412") |
| wpas.request("DISCONNECT") |
| |
| def test_connect_cmd_concurrent_grpform_while_connecting(dev, apdev): |
| """Concurrent P2P group formation while connecting to an AP using cfg80211 connect command""" |
| logger.info("Start connection to an infrastructure AP") |
| hapd = hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" }) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("test-open", key_mgmt="NONE", wait_connect=False) |
| |
| logger.info("Form a P2P group while connecting to an AP") |
| wpas.request("SET p2p_no_group_iface 0") |
| |
| [i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_freq=2412, |
| r_dev=wpas, r_freq=2412) |
| check_grpform_results(i_res, r_res) |
| remove_group(dev[0], wpas) |
| |
| logger.info("Confirm AP connection after P2P group removal") |
| hwsim_utils.test_connectivity(wpas, hapd) |
| |
| def test_connect_cmd_reject_assoc(dev, apdev): |
| """Connection using cfg80211 connect command getting rejected""" |
| params = { "ssid": "sta-connect", |
| "require_ht": "1" } |
| hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412", |
| disable_ht="1", wait_connect=False) |
| # Reject event gets reported twice since we force connect command to be used |
| # with a driver that supports auth+assoc for testing purposes. |
| for i in range(0, 2): |
| ev = wpas.wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=15) |
| if ev is None: |
| raise Exception("Association rejection timed out") |
| if "status_code=27" not in ev: |
| raise Exception("Unexpected rejection status code") |
| |
| def test_connect_cmd_disconnect_event(dev, apdev): |
| """Connection using cfg80211 connect command getting disconnected by the AP""" |
| params = { "ssid": "sta-connect" } |
| hapd = hostapd.add_ap(apdev[0]['ifname'], params) |
| |
| wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') |
| wpas.interface_add("wlan5", drv_params="force_connect_cmd=1") |
| wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412") |
| |
| if "OK" not in hapd.request("DEAUTHENTICATE " + wpas.p2p_interface_addr()): |
| raise Exception("DEAUTHENTICATE command failed") |
| ev = wpas.wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5) |
| if ev is None: |
| raise Exception("Disconnection event timed out") |
| # This event was actually based on deauthenticate event since we force |
| # connect command to be used with a driver that supports auth+assoc for |
| # testing purposes. Anyway, wait some time to allow the debug log to capture |
| # the following NL80211_CMD_DISCONNECT event. |
| time.sleep(0.1) |
