blob: 19ac4ec59e6183795fe38584cc0d80f713946da0 [file] [log] [blame]
/*
* copyright (c) 2001 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef AVCODEC_AVCODEC_H
#define AVCODEC_AVCODEC_H
/**
* @file libavcodec/avcodec.h
* external API header
*/
#include <errno.h>
#include "libavutil/avutil.h"
#define LIBAVCODEC_VERSION_MAJOR 52
#define LIBAVCODEC_VERSION_MINOR 20
#define LIBAVCODEC_VERSION_MICRO 1
#define LIBAVCODEC_VERSION_INT AV_VERSION_INT(LIBAVCODEC_VERSION_MAJOR, \
LIBAVCODEC_VERSION_MINOR, \
LIBAVCODEC_VERSION_MICRO)
#define LIBAVCODEC_VERSION AV_VERSION(LIBAVCODEC_VERSION_MAJOR, \
LIBAVCODEC_VERSION_MINOR, \
LIBAVCODEC_VERSION_MICRO)
#define LIBAVCODEC_BUILD LIBAVCODEC_VERSION_INT
#define LIBAVCODEC_IDENT "Lavc" AV_STRINGIFY(LIBAVCODEC_VERSION)
#define AV_NOPTS_VALUE INT64_C(0x8000000000000000)
#define AV_TIME_BASE 1000000
#define AV_TIME_BASE_Q (AVRational){1, AV_TIME_BASE}
/**
* Identifies the syntax and semantics of the bitstream.
* The principle is roughly:
* Two decoders with the same ID can decode the same streams.
* Two encoders with the same ID can encode compatible streams.
* There may be slight deviations from the principle due to implementation
* details.
*
* If you add a codec ID to this list, add it so that
* 1. no value of a existing codec ID changes (that would break ABI),
* 2. it is as close as possible to similar codecs.
*/
enum CodecID {
CODEC_ID_NONE,
/* video codecs */
CODEC_ID_MPEG1VIDEO,
CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
CODEC_ID_MPEG2VIDEO_XVMC,
CODEC_ID_H261,
CODEC_ID_H263,
CODEC_ID_RV10,
CODEC_ID_RV20,
CODEC_ID_MJPEG,
CODEC_ID_MJPEGB,
CODEC_ID_LJPEG,
CODEC_ID_SP5X,
CODEC_ID_JPEGLS,
CODEC_ID_MPEG4,
CODEC_ID_RAWVIDEO,
CODEC_ID_MSMPEG4V1,
CODEC_ID_MSMPEG4V2,
CODEC_ID_MSMPEG4V3,
CODEC_ID_WMV1,
CODEC_ID_WMV2,
CODEC_ID_H263P,
CODEC_ID_H263I,
CODEC_ID_FLV1,
CODEC_ID_SVQ1,
CODEC_ID_SVQ3,
CODEC_ID_DVVIDEO,
CODEC_ID_HUFFYUV,
CODEC_ID_CYUV,
CODEC_ID_H264,
CODEC_ID_INDEO3,
CODEC_ID_VP3,
CODEC_ID_THEORA,
CODEC_ID_ASV1,
CODEC_ID_ASV2,
CODEC_ID_FFV1,
CODEC_ID_4XM,
CODEC_ID_VCR1,
CODEC_ID_CLJR,
CODEC_ID_MDEC,
CODEC_ID_ROQ,
CODEC_ID_INTERPLAY_VIDEO,
CODEC_ID_XAN_WC3,
CODEC_ID_XAN_WC4,
CODEC_ID_RPZA,
CODEC_ID_CINEPAK,
CODEC_ID_WS_VQA,
CODEC_ID_MSRLE,
CODEC_ID_MSVIDEO1,
CODEC_ID_IDCIN,
CODEC_ID_8BPS,
CODEC_ID_SMC,
CODEC_ID_FLIC,
CODEC_ID_TRUEMOTION1,
CODEC_ID_VMDVIDEO,
CODEC_ID_MSZH,
CODEC_ID_ZLIB,
CODEC_ID_QTRLE,
CODEC_ID_SNOW,
CODEC_ID_TSCC,
CODEC_ID_ULTI,
CODEC_ID_QDRAW,
CODEC_ID_VIXL,
CODEC_ID_QPEG,
CODEC_ID_XVID,
CODEC_ID_PNG,
CODEC_ID_PPM,
CODEC_ID_PBM,
CODEC_ID_PGM,
CODEC_ID_PGMYUV,
CODEC_ID_PAM,
CODEC_ID_FFVHUFF,
CODEC_ID_RV30,
CODEC_ID_RV40,
CODEC_ID_VC1,
CODEC_ID_WMV3,
CODEC_ID_LOCO,
CODEC_ID_WNV1,
CODEC_ID_AASC,
CODEC_ID_INDEO2,
CODEC_ID_FRAPS,
CODEC_ID_TRUEMOTION2,
CODEC_ID_BMP,
CODEC_ID_CSCD,
CODEC_ID_MMVIDEO,
CODEC_ID_ZMBV,
CODEC_ID_AVS,
CODEC_ID_SMACKVIDEO,
CODEC_ID_NUV,
CODEC_ID_KMVC,
CODEC_ID_FLASHSV,
CODEC_ID_CAVS,
CODEC_ID_JPEG2000,
CODEC_ID_VMNC,
CODEC_ID_VP5,
CODEC_ID_VP6,
CODEC_ID_VP6F,
CODEC_ID_TARGA,
CODEC_ID_DSICINVIDEO,
CODEC_ID_TIERTEXSEQVIDEO,
CODEC_ID_TIFF,
CODEC_ID_GIF,
CODEC_ID_FFH264,
CODEC_ID_DXA,
CODEC_ID_DNXHD,
CODEC_ID_THP,
CODEC_ID_SGI,
CODEC_ID_C93,
CODEC_ID_BETHSOFTVID,
CODEC_ID_PTX,
CODEC_ID_TXD,
CODEC_ID_VP6A,
CODEC_ID_AMV,
CODEC_ID_VB,
CODEC_ID_PCX,
CODEC_ID_SUNRAST,
CODEC_ID_INDEO4,
CODEC_ID_INDEO5,
CODEC_ID_MIMIC,
CODEC_ID_RL2,
CODEC_ID_8SVX_EXP,
CODEC_ID_8SVX_FIB,
CODEC_ID_ESCAPE124,
CODEC_ID_DIRAC,
CODEC_ID_BFI,
CODEC_ID_CMV,
CODEC_ID_MOTIONPIXELS,
CODEC_ID_TGV,
CODEC_ID_TGQ,
CODEC_ID_TQI,
/* various PCM "codecs" */
CODEC_ID_PCM_S16LE= 0x10000,
CODEC_ID_PCM_S16BE,
CODEC_ID_PCM_U16LE,
CODEC_ID_PCM_U16BE,
CODEC_ID_PCM_S8,
CODEC_ID_PCM_U8,
CODEC_ID_PCM_MULAW,
CODEC_ID_PCM_ALAW,
CODEC_ID_PCM_S32LE,
CODEC_ID_PCM_S32BE,
CODEC_ID_PCM_U32LE,
CODEC_ID_PCM_U32BE,
CODEC_ID_PCM_S24LE,
CODEC_ID_PCM_S24BE,
CODEC_ID_PCM_U24LE,
CODEC_ID_PCM_U24BE,
CODEC_ID_PCM_S24DAUD,
CODEC_ID_PCM_ZORK,
CODEC_ID_PCM_S16LE_PLANAR,
CODEC_ID_PCM_DVD,
CODEC_ID_PCM_F32BE,
CODEC_ID_PCM_F32LE,
CODEC_ID_PCM_F64BE,
CODEC_ID_PCM_F64LE,
/* various ADPCM codecs */
CODEC_ID_ADPCM_IMA_QT= 0x11000,
CODEC_ID_ADPCM_IMA_WAV,
CODEC_ID_ADPCM_IMA_DK3,
CODEC_ID_ADPCM_IMA_DK4,
CODEC_ID_ADPCM_IMA_WS,
CODEC_ID_ADPCM_IMA_SMJPEG,
CODEC_ID_ADPCM_MS,
CODEC_ID_ADPCM_4XM,
CODEC_ID_ADPCM_XA,
CODEC_ID_ADPCM_ADX,
CODEC_ID_ADPCM_EA,
CODEC_ID_ADPCM_G726,
CODEC_ID_ADPCM_CT,
CODEC_ID_ADPCM_SWF,
CODEC_ID_ADPCM_YAMAHA,
CODEC_ID_ADPCM_SBPRO_4,
CODEC_ID_ADPCM_SBPRO_3,
CODEC_ID_ADPCM_SBPRO_2,
CODEC_ID_ADPCM_THP,
CODEC_ID_ADPCM_IMA_AMV,
CODEC_ID_ADPCM_EA_R1,
CODEC_ID_ADPCM_EA_R3,
CODEC_ID_ADPCM_EA_R2,
CODEC_ID_ADPCM_IMA_EA_SEAD,
CODEC_ID_ADPCM_IMA_EA_EACS,
CODEC_ID_ADPCM_EA_XAS,
CODEC_ID_ADPCM_EA_MAXIS_XA,
CODEC_ID_ADPCM_IMA_ISS,
/* AMR */
CODEC_ID_AMR_NB= 0x12000,
CODEC_ID_AMR_WB,
/* RealAudio codecs*/
CODEC_ID_RA_144= 0x13000,
CODEC_ID_RA_288,
/* various DPCM codecs */
CODEC_ID_ROQ_DPCM= 0x14000,
CODEC_ID_INTERPLAY_DPCM,
CODEC_ID_XAN_DPCM,
CODEC_ID_SOL_DPCM,
/* audio codecs */
CODEC_ID_MP2= 0x15000,
CODEC_ID_MP3, ///< preferred ID for decoding MPEG audio layer 1, 2 or 3
CODEC_ID_AAC,
CODEC_ID_AC3,
CODEC_ID_DTS,
CODEC_ID_VORBIS,
CODEC_ID_DVAUDIO,
CODEC_ID_WMAV1,
CODEC_ID_WMAV2,
CODEC_ID_MACE3,
CODEC_ID_MACE6,
CODEC_ID_VMDAUDIO,
CODEC_ID_SONIC,
CODEC_ID_SONIC_LS,
CODEC_ID_FLAC,
CODEC_ID_MP3ADU,
CODEC_ID_MP3ON4,
CODEC_ID_SHORTEN,
CODEC_ID_ALAC,
CODEC_ID_WESTWOOD_SND1,
CODEC_ID_GSM, ///< as in Berlin toast format
CODEC_ID_QDM2,
CODEC_ID_COOK,
CODEC_ID_TRUESPEECH,
CODEC_ID_TTA,
CODEC_ID_SMACKAUDIO,
CODEC_ID_QCELP,
CODEC_ID_WAVPACK,
CODEC_ID_DSICINAUDIO,
CODEC_ID_IMC,
CODEC_ID_MUSEPACK7,
CODEC_ID_MLP,
CODEC_ID_GSM_MS, /* as found in WAV */
CODEC_ID_ATRAC3,
CODEC_ID_VOXWARE,
CODEC_ID_APE,
CODEC_ID_NELLYMOSER,
CODEC_ID_MUSEPACK8,
CODEC_ID_SPEEX,
CODEC_ID_WMAVOICE,
CODEC_ID_WMAPRO,
CODEC_ID_WMALOSSLESS,
CODEC_ID_ATRAC3P,
CODEC_ID_EAC3,
CODEC_ID_SIPR,
CODEC_ID_MP1,
/* subtitle codecs */
CODEC_ID_DVD_SUBTITLE= 0x17000,
CODEC_ID_DVB_SUBTITLE,
CODEC_ID_TEXT, ///< raw UTF-8 text
CODEC_ID_XSUB,
CODEC_ID_SSA,
CODEC_ID_MOV_TEXT,
/* other specific kind of codecs (generally used for attachments) */
CODEC_ID_TTF= 0x18000,
CODEC_ID_PROBE= 0x19000, ///< codec_id is not known (like CODEC_ID_NONE) but lavf should attempt to identify it
CODEC_ID_MPEG2TS= 0x20000, /**< _FAKE_ codec to indicate a raw MPEG-2 TS
* stream (only used by libavformat) */
};
enum CodecType {
CODEC_TYPE_UNKNOWN = -1,
CODEC_TYPE_VIDEO,
CODEC_TYPE_AUDIO,
CODEC_TYPE_DATA,
CODEC_TYPE_SUBTITLE,
CODEC_TYPE_ATTACHMENT,
CODEC_TYPE_NB
};
/**
* all in native-endian format
*/
enum SampleFormat {
SAMPLE_FMT_NONE = -1,
SAMPLE_FMT_U8, ///< unsigned 8 bits
SAMPLE_FMT_S16, ///< signed 16 bits
SAMPLE_FMT_S32, ///< signed 32 bits
SAMPLE_FMT_FLT, ///< float
SAMPLE_FMT_DBL, ///< double
SAMPLE_FMT_NB ///< Number of sample formats. DO NOT USE if dynamically linking to libavcodec
};
/* Audio channel masks */
#define CH_FRONT_LEFT 0x00000001
#define CH_FRONT_RIGHT 0x00000002
#define CH_FRONT_CENTER 0x00000004
#define CH_LOW_FREQUENCY 0x00000008
#define CH_BACK_LEFT 0x00000010
#define CH_BACK_RIGHT 0x00000020
#define CH_FRONT_LEFT_OF_CENTER 0x00000040
#define CH_FRONT_RIGHT_OF_CENTER 0x00000080
#define CH_BACK_CENTER 0x00000100
#define CH_SIDE_LEFT 0x00000200
#define CH_SIDE_RIGHT 0x00000400
#define CH_TOP_CENTER 0x00000800
#define CH_TOP_FRONT_LEFT 0x00001000
#define CH_TOP_FRONT_CENTER 0x00002000
#define CH_TOP_FRONT_RIGHT 0x00004000
#define CH_TOP_BACK_LEFT 0x00008000
#define CH_TOP_BACK_CENTER 0x00010000
#define CH_TOP_BACK_RIGHT 0x00020000
#define CH_STEREO_LEFT 0x20000000 ///< Stereo downmix.
#define CH_STEREO_RIGHT 0x40000000 ///< See CH_STEREO_LEFT.
/* Audio channel convenience macros */
#define CH_LAYOUT_MONO (CH_FRONT_CENTER)
#define CH_LAYOUT_STEREO (CH_FRONT_LEFT|CH_FRONT_RIGHT)
#define CH_LAYOUT_SURROUND (CH_LAYOUT_STEREO|CH_FRONT_CENTER)
#define CH_LAYOUT_QUAD (CH_LAYOUT_STEREO|CH_BACK_LEFT|CH_BACK_RIGHT)
#define CH_LAYOUT_5POINT0 (CH_LAYOUT_SURROUND|CH_SIDE_LEFT|CH_SIDE_RIGHT)
#define CH_LAYOUT_5POINT1 (CH_LAYOUT_5POINT0|CH_LOW_FREQUENCY)
#define CH_LAYOUT_7POINT1 (CH_LAYOUT_5POINT1|CH_BACK_LEFT|CH_BACK_RIGHT)
#define CH_LAYOUT_7POINT1_WIDE (CH_LAYOUT_SURROUND|CH_LOW_FREQUENCY|\
CH_BACK_LEFT|CH_BACK_RIGHT|\
CH_FRONT_LEFT_OF_CENTER|CH_FRONT_RIGHT_OF_CENTER)
#define CH_LAYOUT_STEREO_DOWNMIX (CH_STEREO_LEFT|CH_STEREO_RIGHT)
/* in bytes */
#define AVCODEC_MAX_AUDIO_FRAME_SIZE 192000 // 1 second of 48khz 32bit audio
/**
* Required number of additionally allocated bytes at the end of the input bitstream for decoding.
* This is mainly needed because some optimized bitstream readers read
* 32 or 64 bit at once and could read over the end.<br>
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
#define FF_INPUT_BUFFER_PADDING_SIZE 8
/**
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
#define FF_MIN_BUFFER_SIZE 16384
/**
* motion estimation type.
*/
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_LOG,
ME_PHODS,
ME_EPZS, ///< enhanced predictive zonal search
ME_X1, ///< reserved for experiments
ME_HEX, ///< hexagon based search
ME_UMH, ///< uneven multi-hexagon search
ME_ITER, ///< iterative search
ME_TESA, ///< transformed exhaustive search algorithm
};
enum AVDiscard{
/* We leave some space between them for extensions (drop some
* keyframes for intra-only or drop just some bidir frames). */
AVDISCARD_NONE =-16, ///< discard nothing
AVDISCARD_DEFAULT= 0, ///< discard useless packets like 0 size packets in avi
AVDISCARD_NONREF = 8, ///< discard all non reference
AVDISCARD_BIDIR = 16, ///< discard all bidirectional frames
AVDISCARD_NONKEY = 32, ///< discard all frames except keyframes
AVDISCARD_ALL = 48, ///< discard all
};
typedef struct RcOverride{
int start_frame;
int end_frame;
int qscale; // If this is 0 then quality_factor will be used instead.
float quality_factor;
} RcOverride;
#define FF_MAX_B_FRAMES 16
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
*/
#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
#define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
#define CODEC_FLAG_MV0 0x0040 ///< Always try a MB with MV=<0,0>.
#define CODEC_FLAG_PART 0x0080 ///< Use data partitioning.
/**
* The parent program guarantees that the input for B-frames containing
* streams is not written to for at least s->max_b_frames+1 frames, if
* this is not set the input will be copied.
*/
#define CODEC_FLAG_INPUT_PRESERVED 0x0100
#define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
#define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
#define CODEC_FLAG_EXTERN_HUFF 0x1000 ///< Use external Huffman table (for MJPEG).
#define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
#define CODEC_FLAG_EMU_EDGE 0x4000 ///< Don't draw edges.
#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
#define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
location instead of only at frame boundaries. */
#define CODEC_FLAG_NORMALIZE_AQP 0x00020000 ///< Normalize adaptive quantization.
#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
#define CODEC_FLAG_ALT_SCAN 0x00100000 ///< Use alternate scan.
#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
/* Fx : Flag for h263+ extra options */
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
#define CODEC_FLAG_H263P_UMV 0x02000000 ///< unlimited motion vector
#define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
#define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
#define CODEC_FLAG_H263P_AIV 0x00000008 ///< H.263 alternative inter VLC
#define CODEC_FLAG_OBMC 0x00000001 ///< OBMC
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_H263P_SLICE_STRUCT 0x10000000
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
#define CODEC_FLAG_SVCD_SCAN_OFFSET 0x40000000 ///< Will reserve space for SVCD scan offset user data.
#define CODEC_FLAG_CLOSED_GOP 0x80000000
#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
#define CODEC_FLAG2_BPYRAMID 0x00000010 ///< H.264 allow B-frames to be used as references.
#define CODEC_FLAG2_WPRED 0x00000020 ///< H.264 weighted biprediction for B-frames
#define CODEC_FLAG2_MIXED_REFS 0x00000040 ///< H.264 one reference per partition, as opposed to one reference per macroblock
#define CODEC_FLAG2_8X8DCT 0x00000080 ///< H.264 high profile 8x8 transform
#define CODEC_FLAG2_FASTPSKIP 0x00000100 ///< H.264 fast pskip
#define CODEC_FLAG2_AUD 0x00000200 ///< H.264 access unit delimiters
#define CODEC_FLAG2_BRDO 0x00000400 ///< B-frame rate-distortion optimization
#define CODEC_FLAG2_INTRA_VLC 0x00000800 ///< Use MPEG-2 intra VLC table.
#define CODEC_FLAG2_MEMC_ONLY 0x00001000 ///< Only do ME/MC (I frames -> ref, P frame -> ME+MC).
#define CODEC_FLAG2_DROP_FRAME_TIMECODE 0x00002000 ///< timecode is in drop frame format.
#define CODEC_FLAG2_SKIP_RD 0x00004000 ///< RD optimal MB level residual skipping
#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
#define CODEC_FLAG2_NON_LINEAR_QUANT 0x00010000 ///< Use MPEG-2 nonlinear quantizer.
#define CODEC_FLAG2_BIT_RESERVOIR 0x00020000 ///< Use a bit reservoir when encoding if possible
#define CODEC_FLAG2_MBTREE 0x00040000 ///< Use macroblock tree ratecontrol (x264 only)
/* Unsupported options :
* Syntax Arithmetic coding (SAC)
* Reference Picture Selection
* Independent Segment Decoding */
/* /Fx */
/* codec capabilities */
#define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< Decoder can use draw_horiz_band callback.
/**
* Codec uses get_buffer() for allocating buffers.
* direct rendering method 1
*/
#define CODEC_CAP_DR1 0x0002
/* If 'parse_only' field is true, then avcodec_parse_frame() can be used. */
#define CODEC_CAP_PARSE_ONLY 0x0004
#define CODEC_CAP_TRUNCATED 0x0008
/* Codec can export data for HW decoding (XvMC). */
#define CODEC_CAP_HWACCEL 0x0010
/**
* Codec has a nonzero delay and needs to be fed with NULL at the end to get the delayed data.
* If this is not set, the codec is guaranteed to never be fed with NULL data.
*/
#define CODEC_CAP_DELAY 0x0020
/**
* Codec can be fed a final frame with a smaller size.
* This can be used to prevent truncation of the last audio samples.
*/
#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
/**
* Codec can export data for HW decoding (VDPAU).
*/
#define CODEC_CAP_HWACCEL_VDPAU 0x0080
//The following defines may change, don't expect compatibility if you use them.
#define MB_TYPE_INTRA4x4 0x0001
#define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
#define MB_TYPE_INTRA_PCM 0x0004 //FIXME H.264-specific
#define MB_TYPE_16x16 0x0008
#define MB_TYPE_16x8 0x0010
#define MB_TYPE_8x16 0x0020
#define MB_TYPE_8x8 0x0040
#define MB_TYPE_INTERLACED 0x0080
#define MB_TYPE_DIRECT2 0x0100 //FIXME
#define MB_TYPE_ACPRED 0x0200
#define MB_TYPE_GMC 0x0400
#define MB_TYPE_SKIP 0x0800
#define MB_TYPE_P0L0 0x1000
#define MB_TYPE_P1L0 0x2000
#define MB_TYPE_P0L1 0x4000
#define MB_TYPE_P1L1 0x8000
#define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
#define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
/**
* Pan Scan area.
* This specifies the area which should be displayed.
* Note there may be multiple such areas for one frame.
*/
typedef struct AVPanScan{
/**
* id
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int id;
/**
* width and height in 1/16 pel
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int width;
int height;
/**
* position of the top left corner in 1/16 pel for up to 3 fields/frames
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int16_t position[3][2];
}AVPanScan;
#define FF_COMMON_FRAME \
/**\
* pointer to the picture planes.\
* This might be different from the first allocated byte\
* - encoding: \
* - decoding: \
*/\
uint8_t *data[4];\
int linesize[4];\
/**\
* pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.\
* This isn't used by libavcodec unless the default get/release_buffer() is used.\
* - encoding: \
* - decoding: \
*/\
uint8_t *base[4];\
/**\
* 1 -> keyframe, 0-> not\
* - encoding: Set by libavcodec.\
* - decoding: Set by libavcodec.\
*/\
int key_frame;\
\
/**\
* Picture type of the frame, see ?_TYPE below.\
* - encoding: Set by libavcodec. for coded_picture (and set by user for input).\
* - decoding: Set by libavcodec.\
*/\
int pict_type;\
\
/**\
* presentation timestamp in time_base units (time when frame should be shown to user)\
* If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed.\
* - encoding: MUST be set by user.\
* - decoding: Set by libavcodec.\
*/\
int64_t pts;\
\
/**\
* picture number in bitstream order\
* - encoding: set by\
* - decoding: Set by libavcodec.\
*/\
int coded_picture_number;\
/**\
* picture number in display order\
* - encoding: set by\
* - decoding: Set by libavcodec.\
*/\
int display_picture_number;\
\
/**\
* quality (between 1 (good) and FF_LAMBDA_MAX (bad)) \
* - encoding: Set by libavcodec. for coded_picture (and set by user for input).\
* - decoding: Set by libavcodec.\
*/\
int quality; \
\
/**\
* buffer age (1->was last buffer and dint change, 2->..., ...).\
* Set to INT_MAX if the buffer has not been used yet.\
* - encoding: unused\
* - decoding: MUST be set by get_buffer().\
*/\
int age;\
\
/**\
* is this picture used as reference\
* The values for this are the same as the MpegEncContext.picture_structure\
* variable, that is 1->top field, 2->bottom field, 3->frame/both fields.\
* Set to 4 for delayed, non-reference frames.\
* - encoding: unused\
* - decoding: Set by libavcodec. (before get_buffer() call)).\
*/\
int reference;\
\
/**\
* QP table\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
int8_t *qscale_table;\
/**\
* QP store stride\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
int qstride;\
\
/**\
* mbskip_table[mb]>=1 if MB didn't change\
* stride= mb_width = (width+15)>>4\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
uint8_t *mbskip_table;\
\
/**\
* motion vector table\
* @code\
* example:\
* int mv_sample_log2= 4 - motion_subsample_log2;\
* int mb_width= (width+15)>>4;\
* int mv_stride= (mb_width << mv_sample_log2) + 1;\
* motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y];\
* @endcode\
* - encoding: Set by user.\
* - decoding: Set by libavcodec.\
*/\
int16_t (*motion_val[2])[2];\
\
/**\
* macroblock type table\
* mb_type_base + mb_width + 2\
* - encoding: Set by user.\
* - decoding: Set by libavcodec.\
*/\
uint32_t *mb_type;\
\
/**\
* log2 of the size of the block which a single vector in motion_val represents: \
* (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
uint8_t motion_subsample_log2;\
\
/**\
* for some private data of the user\
* - encoding: unused\
* - decoding: Set by user.\
*/\
void *opaque;\
\
/**\
* error\
* - encoding: Set by libavcodec. if flags&CODEC_FLAG_PSNR.\
* - decoding: unused\
*/\
uint64_t error[4];\
\
/**\
* type of the buffer (to keep track of who has to deallocate data[*])\
* - encoding: Set by the one who allocates it.\
* - decoding: Set by the one who allocates it.\
* Note: User allocated (direct rendering) & internal buffers cannot coexist currently.\
*/\
int type;\
\
/**\
* When decoding, this signals how much the picture must be delayed.\
* extra_delay = repeat_pict / (2*fps)\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
int repeat_pict;\
\
/**\
* \
*/\
int qscale_type;\
\
/**\
* The content of the picture is interlaced.\
* - encoding: Set by user.\
* - decoding: Set by libavcodec. (default 0)\
*/\
int interlaced_frame;\
\
/**\
* If the content is interlaced, is top field displayed first.\
* - encoding: Set by user.\
* - decoding: Set by libavcodec.\
*/\
int top_field_first;\
\
/**\
* Pan scan.\
* - encoding: Set by user.\
* - decoding: Set by libavcodec.\
*/\
AVPanScan *pan_scan;\
\
/**\
* Tell user application that palette has changed from previous frame.\
* - encoding: ??? (no palette-enabled encoder yet)\
* - decoding: Set by libavcodec. (default 0).\
*/\
int palette_has_changed;\
\
/**\
* codec suggestion on buffer type if != 0\
* - encoding: unused\
* - decoding: Set by libavcodec. (before get_buffer() call)).\
*/\
int buffer_hints;\
\
/**\
* DCT coefficients\
* - encoding: unused\
* - decoding: Set by libavcodec.\
*/\
short *dct_coeff;\
\
/**\
* motion referece frame index\
* - encoding: Set by user.\
* - decoding: Set by libavcodec.\
*/\
int8_t *ref_index[2];\
\
/**\
* reordered opaque 64bit number (generally a PTS) from AVCodecContext.reordered_opaque\
* output in AVFrame.reordered_opaque\
* - encoding: unused\
* - decoding: Read by user.\
*/\
int64_t reordered_opaque;\
#define FF_QSCALE_TYPE_MPEG1 0
#define FF_QSCALE_TYPE_MPEG2 1
#define FF_QSCALE_TYPE_H264 2
#define FF_BUFFER_TYPE_INTERNAL 1
#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
#define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
#define FF_I_TYPE 1 ///< Intra
#define FF_P_TYPE 2 ///< Predicted
#define FF_B_TYPE 3 ///< Bi-dir predicted
#define FF_S_TYPE 4 ///< S(GMC)-VOP MPEG4
#define FF_SI_TYPE 5 ///< Switching Intra
#define FF_SP_TYPE 6 ///< Switching Predicted
#define FF_BI_TYPE 7
#define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
/**
* Audio Video Frame.
* New fields can be added to the end of FF_COMMON_FRAME with minor version
* bumps.
* Removal, reordering and changes to existing fields require a major
* version bump. No fields should be added into AVFrame before or after
* FF_COMMON_FRAME!
* sizeof(AVFrame) must not be used outside libav*.
*/
typedef struct AVFrame {
FF_COMMON_FRAME
} AVFrame;
/**
* main external API structure.
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* sizeof(AVCodecContext) must not be used outside libav*.
*/
typedef struct AVCodecContext {
/**
* information on struct for av_log
* - set by avcodec_alloc_context
*/
const AVClass *av_class;
/**
* the average bitrate
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: Set by libavcodec. 0 or some bitrate if this info is available in the stream.
*/
int bit_rate;
/**
* number of bits the bitstream is allowed to diverge from the reference.
* the reference can be CBR (for CBR pass1) or VBR (for pass2)
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: unused
*/
int bit_rate_tolerance;
/**
* CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
* Some codecs need additional format info. It is stored here.
* If any muxer uses this then ALL demuxers/parsers AND encoders for the
* specific codec MUST set it correctly otherwise stream copy breaks.
* In general use of this field by muxers is not recommanded.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec. (FIXME: Is this OK?)
*/
int sub_id;
/**
* Motion estimation algorithm used for video coding.
* 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
* 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
* - encoding: MUST be set by user.
* - decoding: unused
*/
int me_method;
/**
* some codecs need / can use extradata like Huffman tables.
* mjpeg: Huffman tables
* rv10: additional flags
* mpeg4: global headers (they can be in the bitstream or here)
* The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid prolems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
*/
uint8_t *extradata;
int extradata_size;
/**
* This is the fundamental unit of time (in seconds) in terms
* of which frame timestamps are represented. For fixed-fps content,
* timebase should be 1/framerate and timestamp increments should be
* identically 1.
* - encoding: MUST be set by user.
* - decoding: Set by libavcodec.
*/
AVRational time_base;
/* video only */
/**
* picture width / height.
* - encoding: MUST be set by user.
* - decoding: Set by libavcodec.
* Note: For compatibility it is possible to set this instead of
* coded_width/height before decoding.
*/
int width, height;
#define FF_ASPECT_EXTENDED 15
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
* - decoding: unused
*/
int gop_size;
/**
* Pixel format, see PIX_FMT_xxx.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum PixelFormat pix_fmt;
/**
* Frame rate emulation. If not zero, the lower layer (i.e. format handler)
* has to read frames at native frame rate.
* - encoding: Set by user.
* - decoding: unused
*/
int rate_emu;
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
* all codecs can do that. You must check the codec capabilities
* beforehand.
* The function is also used by hardware acceleration APIs.
* It is called at least once during frame decoding to pass
* the data needed for hardware render.
* In that mode instead of pixel data, AVFrame points to
* a structure specific to the acceleration API. The application
* reads the structure and can change some fields to indicate progress
* or mark state.
* - encoding: unused
* - decoding: Set by user.
* @param height the height of the slice
* @param y the y position of the slice
* @param type 1->top field, 2->bottom field, 3->frame
* @param offset offset into the AVFrame.data from which the slice should be read
*/
void (*draw_horiz_band)(struct AVCodecContext *s,
const AVFrame *src, int offset[4],
int y, int type, int height);
/* audio only */
int sample_rate; ///< samples per second
int channels; ///< number of audio channels
/**
* audio sample format
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum SampleFormat sample_fmt; ///< sample format, currently unused
/* The following data should not be initialized. */
/**
* Samples per packet, initialized when calling 'init'.
*/
int frame_size;
int frame_number; ///< audio or video frame number
int real_pict_num; ///< Returns the real picture number of previous encoded frame.
/**
* Number of frames the decoded output will be delayed relative to
* the encoded input.
* - encoding: Set by libavcodec.
* - decoding: unused
*/
int delay;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
/**
* minimum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmin;
/**
* maximum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmax;
/**
* maximum quantizer difference between frames
* - encoding: Set by user.
* - decoding: unused
*/
int max_qdiff;
/**
* maximum number of B-frames between non-B-frames
* Note: The output will be delayed by max_b_frames+1 relative to the input.
* - encoding: Set by user.
* - decoding: unused
*/
int max_b_frames;
/**
* qscale factor between IP and B-frames
* If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_factor;
/** obsolete FIXME remove */
int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
int b_frame_strategy;
/**
* hurry up amount
* - encoding: unused
* - decoding: Set by user. 1-> Skip B-frames, 2-> Skip IDCT/dequant too, 5-> Skip everything except header
* @deprecated Deprecated in favor of skip_idct and skip_frame.
*/
int hurry_up;
struct AVCodec *codec;
void *priv_data;
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
/* The RTP callback: This function is called */
/* every time the encoder has a packet to send. */
/* It depends on the encoder if the data starts */
/* with a Start Code (it should). H.263 does. */
/* mb_nb contains the number of macroblocks */
/* encoded in the RTP payload. */
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
/* statistics, used for 2-pass encoding */
int mv_bits;
int header_bits;
int i_tex_bits;
int p_tex_bits;
int i_count;
int p_count;
int skip_count;
int misc_bits;
/**
* number of bits used for the previously encoded frame
* - encoding: Set by libavcodec.
* - decoding: unused
*/
int frame_bits;
/**
* Private data of the user, can be used to carry app specific stuff.
* - encoding: Set by user.
* - decoding: Set by user.
*/
void *opaque;
char codec_name[32];
enum CodecType codec_type; /* see CODEC_TYPE_xxx */
enum CodecID codec_id; /* see CODEC_ID_xxx */
/**
* fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* This is used to work around some encoder bugs.
* A demuxer should set this to what is stored in the field used to identify the codec.
* If there are multiple such fields in a container then the demuxer should choose the one
* which maximizes the information about the used codec.
* If the codec tag field in a container is larger then 32 bits then the demuxer should
* remap the longer ID to 32 bits with a table or other structure. Alternatively a new
* extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
* first.
* - encoding: Set by user, if not then the default based on codec_id will be used.
* - decoding: Set by user, will be converted to uppercase by libavcodec during init.
*/
unsigned int codec_tag;
/**
* Work around bugs in encoders which sometimes cannot be detected automatically.
* - encoding: Set by user
* - decoding: Set by user
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
#define FF_BUG_OLD_MSMPEG4 2
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_BUG_DIRECT_BLOCKSIZE 512
#define FF_BUG_EDGE 1024
#define FF_BUG_HPEL_CHROMA 2048
#define FF_BUG_DC_CLIP 4096
#define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
//#define FF_BUG_FAKE_SCALABILITY 16 //Autodetection should work 100%.
/**
* luma single coefficient elimination threshold
* - encoding: Set by user.
* - decoding: unused
*/
int luma_elim_threshold;
/**
* chroma single coeff elimination threshold
* - encoding: Set by user.
* - decoding: unused
*/
int chroma_elim_threshold;
/**
* strictly follow the standard (MPEG4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
* generally do stupid things. While setting it to inofficial or lower
* will mean the encoder might use things that are not supported by all
* spec compliant decoders. Decoders make no difference between normal,
* inofficial and experimental, that is they always try to decode things
* when they can unless they are explicitly asked to behave stupid
* (=strictly conform to the specs)
*/
int strict_std_compliance;
#define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to a older more strict version of the spec or reference software.
#define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
#define FF_COMPLIANCE_NORMAL 0
#define FF_COMPLIANCE_INOFFICIAL -1 ///< Allow inofficial extensions.
#define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
/**
* qscale offset between IP and B-frames
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_offset;
/**
* Error recognization; higher values will detect more errors but may
* misdetect some more or less valid parts as errors.
* - encoding: unused
* - decoding: Set by user.
*/
int error_recognition;
#define FF_ER_CAREFUL 1
#define FF_ER_COMPLIANT 2
#define FF_ER_AGGRESSIVE 3
#define FF_ER_VERY_AGGRESSIVE 4
/**
* Called at the beginning of each frame to get a buffer for it.
* If pic.reference is set then the frame will be read later by libavcodec.
* avcodec_align_dimensions() should be used to find the required width and
* height, as they normally need to be rounded up to the next multiple of 16.
* - encoding: unused
* - decoding: Set by libavcodec., user can override.
*/
int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Called to release buffers which were allocated with get_buffer.
* A released buffer can be reused in get_buffer().
* pic.data[*] must be set to NULL.
* - encoding: unused
* - decoding: Set by libavcodec., user can override.
*/
void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Size of the frame reordering buffer in the decoder.
* For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int has_b_frames;
/**
* number of bytes per packet if constant and known or 0
* Used by some WAV based audio codecs.
*/
int block_align;
int parse_only; /* - decoding only: If true, only parsing is done
(function avcodec_parse_frame()). The frame
data is returned. Only MPEG codecs support this now. */
/**
* 0-> h263 quant 1-> mpeg quant
* - encoding: Set by user.
* - decoding: unused
*/
int mpeg_quant;
/**
* pass1 encoding statistics output buffer
* - encoding: Set by libavcodec.
* - decoding: unused
*/
char *stats_out;
/**
* pass2 encoding statistics input buffer
* Concatenated stuff from stats_out of pass1 should be placed here.
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
char *stats_in;
/**
* ratecontrol qmin qmax limiting method
* 0-> clipping, 1-> use a nice continous function to limit qscale wthin qmin/qmax.
* - encoding: Set by user.
* - decoding: unused
*/
float rc_qsquish;
float rc_qmod_amp;
int rc_qmod_freq;
/**
* ratecontrol override, see RcOverride
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
RcOverride *rc_override;
int rc_override_count;
/**
* rate control equation
* - encoding: Set by user
* - decoding: unused
*/
const char *rc_eq;
/**
* maximum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
int rc_max_rate;
/**
* minimum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
int rc_min_rate;
/**
* decoder bitstream buffer size
* - encoding: Set by user.
* - decoding: unused
*/
int rc_buffer_size;
float rc_buffer_aggressivity;
/**
* qscale factor between P and I-frames
* If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_factor;
/**
* qscale offset between P and I-frames
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_offset;
/**
* initial complexity for pass1 ratecontrol
* - encoding: Set by user.
* - decoding: unused
*/
float rc_initial_cplx;
/**
* DCT algorithm, see FF_DCT_* below
* - encoding: Set by user.
* - decoding: unused
*/
int dct_algo;
#define FF_DCT_AUTO 0
#define FF_DCT_FASTINT 1
#define FF_DCT_INT 2
#define FF_DCT_MMX 3
#define FF_DCT_MLIB 4
#define FF_DCT_ALTIVEC 5
#define FF_DCT_FAAN 6
/**
* luminance masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float lumi_masking;
/**
* temporary complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float temporal_cplx_masking;
/**
* spatial complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float spatial_cplx_masking;
/**
* p block masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float p_masking;
/**
* darkness masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float dark_masking;
/**
* IDCT algorithm, see FF_IDCT_* below.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int idct_algo;
#define FF_IDCT_AUTO 0
#define FF_IDCT_INT 1
#define FF_IDCT_SIMPLE 2
#define FF_IDCT_SIMPLEMMX 3
#define FF_IDCT_LIBMPEG2MMX 4
#define FF_IDCT_PS2 5
#define FF_IDCT_MLIB 6
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
#define FF_IDCT_SH4 9
#define FF_IDCT_SIMPLEARM 10
#define FF_IDCT_H264 11
#define FF_IDCT_VP3 12
#define FF_IDCT_IPP 13
#define FF_IDCT_XVIDMMX 14
#define FF_IDCT_CAVS 15
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#define FF_IDCT_SIMPLEVIS 18
#define FF_IDCT_WMV2 19
#define FF_IDCT_FAAN 20
#define FF_IDCT_EA 21
#define FF_IDCT_SIMPLENEON 22
#define FF_IDCT_SIMPLEALPHA 23
/**
* slice count
* - encoding: Set by libavcodec.
* - decoding: Set by user (or 0).
*/
int slice_count;
/**
* slice offsets in the frame in bytes
* - encoding: Set/allocated by libavcodec.
* - decoding: Set/allocated by user (or NULL).
*/
int *slice_offset;
/**
* error concealment flags
* - encoding: unused
* - decoding: Set by user.
*/
int error_concealment;
#define FF_EC_GUESS_MVS 1
#define FF_EC_DEBLOCK 2
/**
* dsp_mask could be add used to disable unwanted CPU features
* CPU features (i.e. MMX, SSE. ...)
*
* With the FORCE flag you may instead enable given CPU features.
* (Dangerous: Usable in case of misdetection, improper usage however will
* result into program crash.)
*/
unsigned dsp_mask;
#define FF_MM_FORCE 0x80000000 /* Force usage of selected flags (OR) */
/* lower 16 bits - CPU features */
#define FF_MM_MMX 0x0001 ///< standard MMX
#define FF_MM_3DNOW 0x0004 ///< AMD 3DNOW
#define FF_MM_MMXEXT 0x0002 ///< SSE integer functions or AMD MMX ext
#define FF_MM_SSE 0x0008 ///< SSE functions
#define FF_MM_SSE2 0x0010 ///< PIV SSE2 functions
#define FF_MM_3DNOWEXT 0x0020 ///< AMD 3DNowExt
#define FF_MM_SSE3 0x0040 ///< Prescott SSE3 functions
#define FF_MM_SSSE3 0x0080 ///< Conroe SSSE3 functions
#define FF_MM_IWMMXT 0x0100 ///< XScale IWMMXT
#define FF_MM_ALTIVEC 0x0001 ///< standard AltiVec
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
* - encoding: Set by libavcodec.
* - decoding: Set by user.
*/
int bits_per_coded_sample;
/**
* prediction method (needed for huffyuv)
* - encoding: Set by user.
* - decoding: unused
*/
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
/**
* sample aspect ratio (0 if unknown)
* That is the width of a pixel divided by the height of the pixel.
* Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
AVRational sample_aspect_ratio;
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
AVFrame *coded_frame;
/**
* debug
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug;
#define FF_DEBUG_PICT_INFO 1
#define FF_DEBUG_RC 2
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
#define FF_DEBUG_MV 32
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
#define FF_DEBUG_PTS 0x00000200
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
#define FF_DEBUG_VIS_QP 0x00002000
#define FF_DEBUG_VIS_MB_TYPE 0x00004000
#define FF_DEBUG_BUFFERS 0x00008000
/**
* debug
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
/**
* error
* - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[4];
/**
* minimum MB quantizer
* - encoding: unused
* - decoding: unused
*/
int mb_qmin;
/**
* maximum MB quantizer
* - encoding: unused
* - decoding: unused
*/
int mb_qmax;
/**
* motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_cmp;
/**
* subpixel motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_sub_cmp;
/**
* macroblock comparison function (not supported yet)
* - encoding: Set by user.
* - decoding: unused
*/
int mb_cmp;
/**
* interlaced DCT comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int ildct_cmp;
#define FF_CMP_SAD 0
#define FF_CMP_SSE 1
#define FF_CMP_SATD 2
#define FF_CMP_DCT 3
#define FF_CMP_PSNR 4
#define FF_CMP_BIT 5
#define FF_CMP_RD 6
#define FF_CMP_ZERO 7
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
#define FF_CMP_W53 11
#define FF_CMP_W97 12
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_CHROMA 256
/**
* ME diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int dia_size;
/**
* amount of previous MV predictors (2a+1 x 2a+1 square)
* - encoding: Set by user.
* - decoding: unused
*/
int last_predictor_count;
/**
* prepass for motion estimation
* - encoding: Set by user.
* - decoding: unused
*/
int pre_me;
/**
* motion estimation prepass comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_pre_cmp;
/**
* ME prepass diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int pre_dia_size;
/**
* subpel ME quality
* - encoding: Set by user.
* - decoding: unused
*/
int me_subpel_quality;
/**
* callback to negotiate the pixelFormat
* @param fmt is the list of formats which are supported by the codec,
* it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
* The first is always the native one.
* @return the chosen format
* - encoding: unused
* - decoding: Set by user, if not set the native format will be chosen.
*/
enum PixelFormat (*get_format)(struct AVCodecContext *s, const enum PixelFormat * fmt);
/**
* DTG active format information (additional aspect ratio
* information only used in DVB MPEG-2 transport streams)
* 0 if not set.
*
* - encoding: unused
* - decoding: Set by decoder.
*/
int dtg_active_format;
#define FF_DTG_AFD_SAME 8
#define FF_DTG_AFD_4_3 9
#define FF_DTG_AFD_16_9 10
#define FF_DTG_AFD_14_9 11
#define FF_DTG_AFD_4_3_SP_14_9 13
#define FF_DTG_AFD_16_9_SP_14_9 14
#define FF_DTG_AFD_SP_4_3 15
/**
* maximum motion estimation search range in subpel units
* If 0 then no limit.
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_range;
/**
* intra quantizer bias
* - encoding: Set by user.
* - decoding: unused
*/
int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
* inter quantizer bias
* - encoding: Set by user.
* - decoding: unused
*/
int inter_quant_bias;
/**
* color table ID
* - encoding: unused
* - decoding: Which clrtable should be used for 8bit RGB images.
* Tables have to be stored somewhere. FIXME
*/
int color_table_id;
/**
* internal_buffer count
* Don't touch, used by libavcodec default_get_buffer().
*/
int internal_buffer_count;
/**
* internal_buffers
* Don't touch, used by libavcodec default_get_buffer().
*/
void *internal_buffer;
#define FF_LAMBDA_SHIFT 7
#define FF_LAMBDA_SCALE (1<<FF_LAMBDA_SHIFT)
#define FF_QP2LAMBDA 118 ///< factor to convert from H.263 QP to lambda
#define FF_LAMBDA_MAX (256*128-1)
#define FF_QUALITY_SCALE FF_LAMBDA_SCALE //FIXME maybe remove
/**
* Global quality for codecs which cannot change it per frame.
* This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
* - decoding: unused
*/
int global_quality;
#define FF_CODER_TYPE_VLC 0
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
#define FF_CODER_TYPE_DEFLATE 4
/**
* coder type
* - encoding: Set by user.
* - decoding: unused
*/
int coder_type;
/**
* context model
* - encoding: Set by user.
* - decoding: unused
*/
int context_model;
#if 0
/**
*
* - encoding: unused
* - decoding: Set by user.
*/
uint8_t * (*realloc)(struct AVCodecContext *s, uint8_t *buf, int buf_size);
#endif
/**
* slice flags
* - encoding: unused
* - decoding: Set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
/**
* XVideo Motion Acceleration
* - encoding: forbidden
* - decoding: set by decoder
*/
int xvmc_acceleration;
/**
* macroblock decision mode
* - encoding: Set by user.
* - decoding: unused
*/
int mb_decision;
#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
#define FF_MB_DECISION_RD 2 ///< rate distortion
/**
* custom intra quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *intra_matrix;
/**
* custom inter quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *inter_matrix;
/**
* fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* This is used to work around some encoder bugs.
* - encoding: unused
* - decoding: Set by user, will be converted to uppercase by libavcodec during init.
*/
unsigned int stream_codec_tag;
/**
* scene change detection threshold
* 0 is default, larger means fewer detected scene changes.
* - encoding: Set by user.
* - decoding: unused
*/
int scenechange_threshold;
/**
* minimum Lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int lmin;
/**
* maximum Lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int lmax;
/**
* palette control structure
* - encoding: ??? (no palette-enabled encoder yet)
* - decoding: Set by user.
*/
struct AVPaletteControl *palctrl;
/**
* noise reduction strength
* - encoding: Set by user.
* - decoding: unused
*/
int noise_reduction;
/**
* Called at the beginning of a frame to get cr buffer for it.
* Buffer type (size, hints) must be the same. libavcodec won't check it.
* libavcodec will pass previous buffer in pic, function should return
* same buffer or new buffer with old frame "painted" into it.
* If pic.data[0] == NULL must behave like get_buffer().
* - encoding: unused
* - decoding: Set by libavcodec., user can override
*/
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Number of bits which should be loaded into the rc buffer before decoding starts.
* - encoding: Set by user.
* - decoding: unused
*/
int rc_initial_buffer_occupancy;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int inter_threshold;
/**
* CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags2;
/**
* Simulates errors in the bitstream to test error concealment.
* - encoding: Set by user.
* - decoding: unused
*/
int error_rate;
/**
* MP3 antialias algorithm, see FF_AA_* below.
* - encoding: unused
* - decoding: Set by user.
*/
int antialias_algo;
#define FF_AA_AUTO 0
#define FF_AA_FASTINT 1 //not implemented yet
#define FF_AA_INT 2
#define FF_AA_FLOAT 3
/**
* quantizer noise shaping
* - encoding: Set by user.
* - decoding: unused
*/
int quantizer_noise_shaping;
/**
* thread count
* is used to decide how many independent tasks should be passed to execute()
* - encoding: Set by user.
* - decoding: Set by user.
*/
int thread_count;
/**
* The codec may call this to execute several independent things.
* It will return only after finishing all tasks.
* The user may replace this with some multithreaded implementation,
* the default implementation will execute the parts serially.
* @param count the number of things to execute
* - encoding: Set by libavcodec, user can override.
* - decoding: Set by libavcodec, user can override.
*/
int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
/**
* thread opaque
* Can be used by execute() to store some per AVCodecContext stuff.
* - encoding: set by execute()
* - decoding: set by execute()
*/
void *thread_opaque;
/**
* Motion estimation threshold below which no motion estimation is
* performed, but instead the user specified motion vectors are used.
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_threshold;
/**
* Macroblock threshold below which the user specified macroblock types will be used.
* - encoding: Set by user.
* - decoding: unused
*/
int mb_threshold;
/**
* precision of the intra DC coefficient - 8
* - encoding: Set by user.
* - decoding: unused
*/
int intra_dc_precision;
/**
* noise vs. sse weight for the nsse comparsion function
* - encoding: Set by user.
* - decoding: unused
*/
int nsse_weight;
/**
* Number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_top;
/**
* Number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_bottom;
/**
* profile
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int profile;
#define FF_PROFILE_UNKNOWN -99
#define FF_PROFILE_AAC_MAIN 0
#define FF_PROFILE_AAC_LOW 1
#define FF_PROFILE_AAC_SSR 2
#define FF_PROFILE_AAC_LTP 3
/**
* level
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int level;
#define FF_LEVEL_UNKNOWN -99
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
*/
int lowres;
/**
* Bitstream width / height, may be different from width/height if lowres
* or other things are used.
* - encoding: unused
* - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
*/
int coded_width, coded_height;
/**
* frame skip threshold
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_threshold;
/**
* frame skip factor
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_factor;
/**
* frame skip exponent
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_exp;
/**
* frame skip comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_cmp;
/**
* Border processing masking, raises the quantizer for mbs on the borders
* of the picture.
* - encoding: Set by user.
* - decoding: unused
*/
float border_masking;
/**
* minimum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
* maximum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_penalty_compensation;
/**
*
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
*
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
*
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_frame;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int brd_scale;
/**
* constant rate factor - quality-based VBR - values ~correspond to qps
* - encoding: Set by user.
* - decoding: unused
*/
float crf;
/**
* constant quantization parameter rate control method
* - encoding: Set by user.
* - decoding: unused
*/
int cqp;
/**
* minimum GOP size
* - encoding: Set by user.
* - decoding: unused
*/
int keyint_min;
/**
* number of reference frames
* - encoding: Set by user.
* - decoding: Set by lavc.
*/
int refs;
/**
* chroma qp offset from luma
* - encoding: Set by user.
* - decoding: unused
*/
int chromaoffset;
/**
* Influences how often B-frames are used.
* - encoding: Set by user.
* - decoding: unused
*/
int bframebias;
/**
* trellis RD quantization
* - encoding: Set by user.
* - decoding: unused
*/
int trellis;
/**
* Reduce fluctuations in qp (before curve compression).
* - encoding: Set by user.
* - decoding: unused
*/
float complexityblur;
/**
* in-loop deblocking filter alphac0 parameter
* alpha is in the range -6...6
* - encoding: Set by user.
* - decoding: unused
*/
int deblockalpha;
/**
* in-loop deblocking filter beta parameter
* beta is in the range -6...6
* - encoding: Set by user.
* - decoding: unused
*/
int deblockbeta;
/**
* macroblock subpartition sizes to consider - p8x8, p4x4, b8x8, i8x8, i4x4
* - encoding: Set by user.
* - decoding: unused
*/
int partitions;
#define X264_PART_I4X4 0x001 /* Analyze i4x4 */
#define X264_PART_I8X8 0x002 /* Analyze i8x8 (requires 8x8 transform) */
#define X264_PART_P8X8 0x010 /* Analyze p16x8, p8x16 and p8x8 */
#define X264_PART_P4X4 0x020 /* Analyze p8x4, p4x8, p4x4 */
#define X264_PART_B8X8 0x100 /* Analyze b16x8, b8x16 and b8x8 */
/**
* direct MV prediction mode - 0 (none), 1 (spatial), 2 (temporal), 3 (auto)
* - encoding: Set by user.
* - decoding: unused
*/
int directpred;
/**
* Audio cutoff bandwidth (0 means "automatic")
* - encoding: Set by user.
* - decoding: unused
*/
int cutoff;
/**
* Multiplied by qscale for each frame and added to scene_change_score.
* - encoding: Set by user.
* - decoding: unused
*/
int scenechange_factor;
/**
*
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
/**
* Adjusts sensitivity of b_frame_strategy 1.
* - encoding: Set by user.
* - decoding: unused
*/
int b_sensitivity;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int compression_level;
#define FF_COMPRESSION_DEFAULT -1
/**
* Sets whether to use LPC mode - used by FLAC encoder.
* - encoding: Set by user.
* - decoding: unused
*/
int use_lpc;
/**
* LPC coefficient precision - used by FLAC encoder
* - encoding: Set by user.
* - decoding: unused
*/
int lpc_coeff_precision;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int min_prediction_order;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int max_prediction_order;
/**
* search method for selecting prediction order
* - encoding: Set by user.
* - decoding: unused
*/
int prediction_order_method;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int min_partition_order;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int max_partition_order;
/**
* GOP timecode frame start number, in non drop frame format
* - encoding: Set by user.
* - decoding: unused
*/
int64_t timecode_frame_start;
#if LIBAVCODEC_VERSION_MAJOR < 53
/**
* Decoder should decode to this many channels if it can (0 for default)
* - encoding: unused
* - decoding: Set by user.
* @deprecated Deprecated in favor of request_channel_layout.
*/
int request_channels;
#endif
/**
* Percentage of dynamic range compression to be applied by the decoder.
* The default value is 1.0, corresponding to full compression.
* - encoding: unused
* - decoding: Set by user.
*/
float drc_scale;
/**
* opaque 64bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* - encoding: unused
* - decoding: Set by user.
*/
int64_t reordered_opaque;
/**
* Bits per sample/pixel of internal libavcodec pixel/sample format.
* This field is applicable only when sample_fmt is SAMPLE_FMT_S32.
* - encoding: set by user.
* - decoding: set by libavcodec.
*/
int bits_per_raw_sample;
/**
* Audio channel layout.
* - encoding: set by user.
* - decoding: set by libavcodec.
*/
int64_t channel_layout;
/**
* Request decoder to use this channel layout if it can (0 for default)
* - encoding: unused
* - decoding: Set by user.
*/
int64_t request_channel_layout;
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_max_available_vbv_use;
/**
* Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_min_vbv_overflow_use;
/**
* Hardware accelerator in use
* - encoding: unused.
* - decoding: Set by libavcodec
*/
struct AVHWAccel *hwaccel;
/**
* For some codecs, the time base is closer to the field rate than the frame rate.
* Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
* if no telecine is used ...
*
* Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
*/
int ticks_per_frame;
/**
* explicit P-frame weighted prediction analysis method
* 0: off
* 1: fast blind weighting (one reference duplicate with -1 offset)
* 2: smart weighting (full fade detection analysis)
* - encoding: Set by user.
* - decoding: unused
*/
int weighted_p_pred;
} AVCodecContext;
/**
* AVCodec.
*/
typedef struct AVCodec {
/**
* Name of the codec implementation.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
* This is the primary way to find a codec from the user perspective.
*/
const char *name;
enum CodecType type;
enum CodecID id;
int priv_data_size;
int (*init)(AVCodecContext *);
int (*encode)(AVCodecContext *, uint8_t *buf, int buf_size, void *data);
int (*close)(AVCodecContext *);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size,
const uint8_t *buf, int buf_size);
/**
* Codec capabilities.
* see CODEC_CAP_*
*/
int capabilities;
struct AVCodec *next;
/**
* Flush buffers.
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
const enum PixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
/**
* Descriptive name for the codec, meant to be more human readable than \p name.
* You \e should use the NULL_IF_CONFIG_SMALL() macro to define it.
*/
const char *long_name;
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum SampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const int64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
} AVCodec;
/**
* AVHWAccel.
*/
typedef struct AVHWAccel {
/**
* Name of the hardware accelerated codec.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
*/
const char *name;
/**
* Type of codec implemented by the hardware accelerator.
*
* See CODEC_TYPE_xxx
*/
enum CodecType type;
/**
* Codec implemented by the hardware accelerator.
*
* See CODEC_ID_xxx
*/
enum CodecID id;
/**
* Supported pixel format.
*
* Only hardware accelerated formats are supported here.
*/
enum PixelFormat pix_fmt;
/**
* Hardware accelerated codec capabilities.
* see FF_HWACCEL_CODEC_CAP_*
*/
int capabilities;
struct AVHWAccel *next;
/**
* Called at the beginning of each frame or field picture.
*
* Meaningful frame information (codec specific) is guaranteed to
* be parsed at this point. This function is mandatory.
*
* Note that \p buf can be NULL along with \p buf_size set to 0.
* Otherwise, this means the whole frame is available at this point.
*
* @param avctx the codec context
* @param buf the frame data buffer base
* @param buf_size the size of the frame in bytes
* @return zero if successful, a negative value otherwise
*/
int (*start_frame)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
/**
* Callback for each slice.
*
* Meaningful slice information (codec specific) is guaranteed to
* be parsed at this point. This function is mandatory.
*
* @param avctx the codec context
* @param buf the slice data buffer base
* @param buf_size the size of the slice in bytes
* @return zero if successful, a negative value otherwise
*/
int (*decode_slice)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
/**
* Called at the end of each frame or field picture.
*
* The whole picture is parsed at this point and can now be sent
* to the hardware accelerator. This function is mandatory.
*
* @param avctx the codec context
* @return zero if successful, a negative value otherwise
*/
int (*end_frame)(AVCodecContext *avctx);
} AVHWAccel;
/**
* four components are given, that's all.
* the last component is alpha
*/
typedef struct AVPicture {
uint8_t *data[4];
int linesize[4]; ///< number of bytes per line
} AVPicture;
/**
* AVPaletteControl
* This structure defines a method for communicating palette changes
* between and demuxer and a decoder.
*
* @deprecated Use AVPacket to send palette changes instead.
* This is totally broken.
*/
#define AVPALETTE_SIZE 1024
#define AVPALETTE_COUNT 256
typedef struct AVPaletteControl {
/* Demuxer sets this to 1 to indicate the palette has changed;
* decoder resets to 0. */
int palette_changed;
/* 4-byte ARGB palette entries, stored in native byte order; note that
* the individual palette components should be on a 8-bit scale; if
* the palette data comes from an IBM VGA native format, the component
* data is probably 6 bits in size and needs to be scaled. */
unsigned int palette[AVPALETTE_COUNT];
} AVPaletteControl attribute_deprecated;
enum AVSubtitleType {
SUBTITLE_NONE,
SUBTITLE_BITMAP, ///< A bitmap, pict will be set
/**
* Plain text, the text field must be set by the decoder and is
* authoritative. ass and pict fields may contain approximations.
*/
SUBTITLE_TEXT,
/**
* Formatted text, the ass field must be set by the decoder and is
* authoritative. pict and text fields may contain approximations.
*/
SUBTITLE_ASS,
};
typedef struct AVSubtitleRect {
int x; ///< top left corner of pict, undefined when pict is not set
int y; ///< top left corner of pict, undefined when pict is not set
int w; ///< width of pict, undefined when pict is not set
int h; ///< height of pict, undefined when pict is not set
int nb_colors; ///< number of colors in pict, undefined when pict is not set
/**
* data+linesize for the bitmap of this subtitle.
* can be set for text/ass as well once they where rendered
*/
AVPicture pict;
enum AVSubtitleType type;
char *text; ///< 0 terminated plain UTF-8 text
/**
* 0 terminated ASS/SSA compatible event line.
* The pressentation of this is unaffected by the other values in this
* struct.
*/
char *ass;
} AVSubtitleRect;
typedef struct AVSubtitle {
uint16_t format; /* 0 = graphics */
uint32_t start_display_time; /* relative to packet pts, in ms */
uint32_t end_display_time; /* relative to packet pts, in ms */
unsigned num_rects;
AVSubtitleRect **rects;
} AVSubtitle;
/* resample.c */
struct ReSampleContext;
struct AVResampleContext;
typedef struct ReSampleContext ReSampleContext;
#if LIBAVCODEC_VERSION_MAJOR < 53
/**
* @deprecated Use av_audio_resample_init() instead.
*/
attribute_deprecated ReSampleContext *audio_resample_init(int output_channels, int input_channels,
int output_rate, int input_rate);
#endif
/**
* Initializes audio resampling context
*
* @param output_channels number of output channels
* @param input_channels number of input channels
* @param output_rate output sample rate
* @param input_rate input sample rate
* @param sample_fmt_out requested output sample format
* @param sample_fmt_in input sample format
* @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
* @param log2_phase_count log2 of the number of entries in the polyphase filterbank
* @param linear If 1 then the used FIR filter will be linearly interpolated
between the 2 closest, if 0 the closest will be used
* @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
* @return allocated ReSampleContext, NULL if error occured
*/
ReSampleContext *av_audio_resample_init(int output_channels, int input_channels,
int output_rate, int input_rate,
enum SampleFormat sample_fmt_out,
enum SampleFormat sample_fmt_in,
int filter_length, int log2_phase_count,
int linear, double cutoff);
int audio_resample(ReSampleContext *s, short *output, short *input, int nb_samples);
void audio_resample_close(ReSampleContext *s);
/**
* Initializes an audio resampler.
* Note, if either rate is not an integer then simply scale both rates up so they are.
* @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
* @param log2_phase_count log2 of the number of entries in the polyphase filterbank
* @param linear If 1 then the used FIR filter will be linearly interpolated
between the 2 closest, if 0 the closest will be used
* @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
*/
struct AVResampleContext *av_resample_init(int out_rate, int in_rate, int filter_length, int log2_phase_count, int linear, double cutoff);
/**
* resamples.
* @param src an array of unconsumed samples
* @param consumed the number of samples of src which have been consumed are returned here
* @param src_size the number of unconsumed samples available
* @param dst_size the amount of space in samples available in dst
* @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
* @return the number of samples written in dst or -1 if an error occurred
*/
int av_resample(struct AVResampleContext *c, short *dst, short *src, int *consumed, int src_size, int dst_size, int update_ctx);
/**
* Compensates samplerate/timestamp drift. The compensation is done by changing
* the resampler parameters, so no audible clicks or similar distortions occur
* @param compensation_distance distance in output samples over which the compensation should be performed
* @param sample_delta number of output samples which should be output less
*
* example: av_resample_compensate(c, 10, 500)
* here instead of 510 samples only 500 samples would be output
*
* note, due to rounding the actual compensation might be slightly different,
* especially if the compensation_distance is large and the in_rate used during init is small
*/
void av_resample_compensate(struct AVResampleContext *c, int sample_delta, int compensation_distance);
void av_resample_close(struct AVResampleContext *c);
/**
* Allocate memory for a picture. Call avpicture_free to free it.
*
* @param picture the picture to be filled in
* @param pix_fmt the format of the picture
* @param width the width of the picture
* @param height the height of the picture
* @return zero if successful, a negative value if not
*/
int avpicture_alloc(AVPicture *picture, int pix_fmt, int width, int height);
/**
* Free a picture previously allocated by avpicture_alloc().
*
* @param picture the AVPicture to be freed
*/
void avpicture_free(AVPicture *picture);
/**
* Fill in the AVPicture fields.
* The fields of the given AVPicture are filled in by using the 'ptr' address
* which points to the image data buffer. Depending on the specified picture
* format, one or multiple image data pointers and line sizes will be set.
* If a planar format is specified, several pointers will be set pointing to
* the different picture planes and the line sizes of the different planes
* will be stored in the lines_sizes array.
*
* @param picture AVPicture whose fields are to be filled in
* @param ptr Buffer which will contain or contains the actual image data
* @param pix_fmt The format in which the picture data is stored.
* @param width the width of the image in pixels
* @param height the height of the image in pixels
* @return size of the image data in bytes
*/
int avpicture_fill(AVPicture *picture, uint8_t *ptr,
int pix_fmt, int width, int height);
int avpicture_layout(const AVPicture* src, int pix_fmt, int width, int height,
unsigned char *dest, int dest_size);
/**
* Calculate the size in bytes that a picture of the given width and height
* would occupy if stored in the given picture format.
*
* @param pix_fmt the given picture format
* @param width the width of the image
* @param height the height of the image
* @return Image data size in bytes
*/
int avpicture_get_size(int pix_fmt, int width, int height);
void avcodec_get_chroma_sub_sample(int pix_fmt, int *h_shift, int *v_shift);
const char *avcodec_get_pix_fmt_name(int pix_fmt);
void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
enum PixelFormat avcodec_get_pix_fmt(const char* name);
unsigned int avcodec_pix_fmt_to_codec_tag(enum PixelFormat p);
#define FF_LOSS_RESOLUTION 0x0001 /**< loss due to resolution change */
#define FF_LOSS_DEPTH 0x0002 /**< loss due to color depth change */
#define FF_LOSS_COLORSPACE 0x0004 /**< loss due to color space conversion */
#define FF_LOSS_ALPHA 0x0008 /**< loss of alpha bits */
#define FF_LOSS_COLORQUANT 0x0010 /**< loss due to color quantization */
#define FF_LOSS_CHROMA 0x0020 /**< loss of chroma (e.g. RGB to gray conversion) */
/**
* Computes what kind of losses will occur when converting from one specific
* pixel format to another.
* When converting from one pixel format to another, information loss may occur.
* For example, when converting from RGB24 to GRAY, the color information will
* be lost. Similarly, other losses occur when converting from some formats to
* other formats. These losses can involve loss of chroma, but also loss of
* resolution, loss of color depth, loss due to the color space conversion, loss
* of the alpha bits or loss due to color quantization.
* avcodec_get_fix_fmt_loss() informs you about the various types of losses
* which will occur when converting from one pixel format to another.
*
* @param[in] dst_pix_fmt destination pixel format
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @return Combination of flags informing you what kind of losses will occur.
*/
int avcodec_get_pix_fmt_loss(int dst_pix_fmt, int src_pix_fmt,
int has_alpha);
/**
* Finds the best pixel format to convert to given a certain source pixel
* format. When converting from one pixel format to another, information loss
* may occur. For example, when converting from RGB24 to GRAY, the color
* information will be lost. Similarly, other losses occur when converting from
* some formats to other formats. avcodec_find_best_pix_fmt() searches which of
* the given pixel formats should be used to suffer the least amount of loss.
* The pixel formats from which it chooses one, are determined by the
* \p pix_fmt_mask parameter.
*
* @code
* src_pix_fmt = PIX_FMT_YUV420P;
* pix_fmt_mask = (1 << PIX_FMT_YUV422P) || (1 << PIX_FMT_RGB24);
* dst_pix_fmt = avcodec_find_best_pix_fmt(pix_fmt_mask, src_pix_fmt, alpha, &loss);
* @endcode
*
* @param[in] pix_fmt_mask bitmask determining which pixel format to choose from
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
* @return The best pixel format to convert to or -1 if none was found.
*/
int avcodec_find_best_pix_fmt(int64_t pix_fmt_mask, int src_pix_fmt,
int has_alpha, int *loss_ptr);
/**
* Print in buf the string corresponding to the pixel format with
* number pix_fmt, or an header if pix_fmt is negative.
*
* @param[in] buf the buffer where to write the string
* @param[in] buf_size the size of buf
* @param[in] pix_fmt the number of the pixel format to print the corresponding info string, or
* a negative value to print the corresponding header.
* Meaningful values for obtaining a pixel format info vary from 0 to PIX_FMT_NB -1.
*/
void avcodec_pix_fmt_string (char *buf, int buf_size, int pix_fmt);
#define FF_ALPHA_TRANSP 0x0001 /* image has some totally transparent pixels */
#define FF_ALPHA_SEMI_TRANSP 0x0002 /* image has some transparent pixels */
/**
* Tell if an image really has transparent alpha values.
* @return ored mask of FF_ALPHA_xxx constants
*/
int img_get_alpha_info(const AVPicture *src,
int pix_fmt, int width, int height);
/* deinterlace a picture */
/* deinterlace - if not supported return -1 */
int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
int pix_fmt, int width, int height);
/* external high level API */
/**
* If c is NULL, returns the first registered codec,
* if c is non-NULL, returns the next registered codec after c,
* or NULL if c is the last one.
*/
AVCodec *av_codec_next(AVCodec *c);
/**
* Returns the LIBAVCODEC_VERSION_INT constant.
*/
unsigned avcodec_version(void);
/**
* Initializes libavcodec.
*
* @warning This function \e must be called before any other libavcodec
* function.
*/
void avcodec_init(void);
#if LIBAVCODEC_VERSION_MAJOR < 53
/**
* @deprecated Deprecated in favor of avcodec_register().
*/
attribute_deprecated void register_avcodec(AVCodec *codec);
#endif
/**
* Register the codec \p codec and initialize libavcodec.
*
* @see avcodec_init()
*/
void avcodec_register(AVCodec *codec);
/**
* Finds a registered encoder with a matching codec ID.
*
* @param id CodecID of the requested encoder
* @return An encoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_encoder(enum CodecID id);
/**
* Finds a registered encoder with the specified name.
*
* @param name name of the requested encoder
* @return An encoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_encoder_by_name(const char *name);
/**
* Finds a registered decoder with a matching codec ID.
*
* @param id CodecID of the requested decoder
* @return A decoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_decoder(enum CodecID id);
/**
* Finds a registered decoder with the specified name.
*
* @param name name of the requested decoder
* @return A decoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
void avcodec_string(char *buf, int buf_size, AVCodecContext *enc, int encode);
/**
* Sets the fields of the given AVCodecContext to default values.
*
* @param s The AVCodecContext of which the fields should be set to default values.
*/
void avcodec_get_context_defaults(AVCodecContext *s);
/** THIS FUNCTION IS NOT YET PART OF THE PUBLIC API!
* we WILL change its arguments and name a few times! */
void avcodec_get_context_defaults2(AVCodecContext *s, enum CodecType);
/**
* Allocates an AVCodecContext and sets its fields to default values. The
* resulting struct can be deallocated by simply calling av_free().
*
* @return An AVCodecContext filled with default values or NULL on failure.
* @see avcodec_get_context_defaults
*/
AVCodecContext *avcodec_alloc_context(void);
/** THIS FUNCTION IS NOT YET PART OF THE PUBLIC API!
* we WILL change its arguments and name a few times! */
AVCodecContext *avcodec_alloc_context2(enum CodecType);
/**
* Sets the fields of the given AVFrame to default values.
*
* @param pic The AVFrame of which the fields should be set to default values.
*/
void avcodec_get_frame_defaults(AVFrame *pic);
/**
* Allocates an AVFrame and sets its fields to default values. The resulting
* struct can be deallocated by simply calling av_free().
*
* @return An AVFrame filled with default values or NULL on failure.
* @see avcodec_get_frame_defaults
*/
AVFrame *avcodec_alloc_frame(void);
int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
/**
* Checks if the given dimension of a picture is valid, meaning that all
* bytes of the picture can be addressed with a signed int.
*
* @param[in] w Width of the picture.
* @param[in] h Height of the picture.
* @return Zero if valid, a negative value if invalid.
*/
int avcodec_check_dimensions(void *av_log_ctx, unsigned int w, unsigned int h);
enum PixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum PixelFormat * fmt);
int avcodec_thread_init(AVCodecContext *s, int thread_count);
void avcodec_thread_free(AVCodecContext *s);
int avcodec_thread_execute(AVCodecContext *s, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
//FIXME func typedef
/**
* Initializes the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated.
*
* The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
* avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
* retrieving a codec.
*
* @warning This function is not thread safe!
*
* @code
* avcodec_register_all();
* codec = avcodec_find_decoder(CODEC_ID_H264);
* if (!codec)
* exit(1);
*
* context = avcodec_alloc_context();
*
* if (avcodec_open(context, codec) < 0)
* exit(1);
* @endcode
*
* @param avctx The context which will be set up to use the given codec.
* @param codec The codec to use within the context.
* @return zero on success, a negative value on error
* @see avcodec_alloc_context, avcodec_find_decoder, avcodec_find_encoder
*/
int avcodec_open(AVCodecContext *avctx, AVCodec *codec);
/**
* Decodes an audio frame from \p buf into \p samples.
* The avcodec_decode_audio2() function decodes an audio frame from the input
* buffer \p buf of size \p buf_size. To decode it, it makes use of the
* audio codec which was coupled with \p avctx using avcodec_open(). The
* resulting decoded frame is stored in output buffer \p samples. If no frame
* could be decompressed, \p frame_size_ptr is zero. Otherwise, it is the
* decompressed frame size in \e bytes.
*
* @warning You \e must set \p frame_size_ptr to the allocated size of the
* output buffer before calling avcodec_decode_audio2().
*
* @warning The input buffer must be \c FF_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer \p buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
* @note You might have to align the input buffer \p buf and output buffer \p
* samples. The alignment requirements depend on the CPU: On some CPUs it isn't
* necessary at all, on others it won't work at all if not aligned and on others
* it will work but it will have an impact on performance. In practice, the
* bitstream should have 4 byte alignment at minimum and all sample data should
* be 16 byte aligned unless the CPU doesn't need it (AltiVec and SSE do). If
* the linesize is not a multiple of 16 then there's no sense in aligning the
* start of the buffer to 16.
*
* @param avctx the codec context
* @param[out] samples the output buffer
* @param[in,out] frame_size_ptr the output buffer size in bytes
* @param[in] buf the input buffer
* @param[in] buf_size the input buffer size in bytes
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
*/
int avcodec_decode_audio2(AVCodecContext *avctx, int16_t *samples,
int *frame_size_ptr,
const uint8_t *buf, int buf_size);
/**
* Decodes a video frame from \p buf into \p picture.
* The avcodec_decode_video() function decodes a video frame from the input
* buffer \p buf of size \p buf_size. To decode it, it makes use of the
* video codec which was coupled with \p avctx using avcodec_open(). The
* resulting decoded frame is stored in \p picture.
*
* @warning The input buffer must be \c FF_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer \p buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
* @note You might have to align the input buffer \p buf and output buffer \p
* samples. The alignment requirements depend on the CPU: on some CPUs it isn't
* necessary at all, on others it won't work at all if not aligned and on others
* it will work but it will have an impact on performance. In practice, the
* bitstream should have 4 byte alignment at minimum and all sample data should
* be 16 byte aligned unless the CPU doesn't need it (AltiVec and SSE do). If
* the linesize is not a multiple of 16 then there's no sense in aligning the
* start of the buffer to 16.
*
* @note Some codecs have a delay between input and output, these need to be
* feeded with buf=NULL, buf_size=0 at the end to return the remaining frames.
*
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
* @param[in] buf the input buffer
* @param[in] buf_size the size of the input buffer in bytes
* @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
*/
int avcodec_decode_video(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
const uint8_t *buf, int buf_size);
/* Decode a subtitle message. Return -1 if error, otherwise return the
* number of bytes used. If no subtitle could be decompressed,
* got_sub_ptr is zero. Otherwise, the subtitle is stored in *sub. */
int avcodec_decode_subtitle(AVCodecContext *avctx, AVSubtitle *sub,
int *got_sub_ptr,
const uint8_t *buf, int buf_size);
int avcodec_parse_frame(AVCodecContext *avctx, uint8_t **pdata,
int *data_size_ptr,
uint8_t *buf, int buf_size);
/**
* Encodes an audio frame from \p samples into \p buf.
* The avcodec_encode_audio() function encodes an audio frame from the input
* buffer \p samples. To encode it, it makes use of the audio codec which was
* coupled with \p avctx using avcodec_open(). The resulting encoded frame is
* stored in output buffer \p buf.
*
* @note The output buffer should be at least \c FF_MIN_BUFFER_SIZE bytes large.
*
* @param avctx the codec context
* @param[out] buf the output buffer
* @param[in] buf_size the output buffer size
* @param[in] samples the input buffer containing the samples
* The number of samples read from this buffer is frame_size*channels,
* both of which are defined in \p avctx.
* For PCM audio the number of samples read from \p samples is equal to
* \p buf_size * input_sample_size / output_sample_size.
* @return On error a negative value is returned, on success zero or the number
* of bytes used to encode the data read from the input buffer.
*/
int avcodec_encode_audio(AVCodecContext *avctx, uint8_t *buf, int buf_size,
const short *samples);
/**
* Encodes a video frame from \p pict into \p buf.
* The avcodec_encode_video() function encodes a video frame from the input
* \p pict. To encode it, it makes use of the video codec which was coupled with
* \p avctx using avcodec_open(). The resulting encoded bytes representing the
* frame are stored in the output buffer \p buf. The input picture should be
* stored using a specific format, namely \c avctx.pix_fmt.
*
* @param avctx the codec context
* @param[out] buf the output buffer for the bitstream of encoded frame
* @param[in] buf_size the size of the output buffer in bytes
* @param[in] pict the input picture to encode
* @return On error a negative value is returned, on success zero or the number
* of bytes used from the output buffer.
*/
int avcodec_encode_video(AVCodecContext *avctx, uint8_t *buf, int buf_size,
const AVFrame *pict);
int avcodec_encode_subtitle(AVCodecContext *avctx, uint8_t *buf, int buf_size,
const AVSubtitle *sub);
int avcodec_close(AVCodecContext *avctx);
/**
* Register all the codecs, parsers and bitstream filters which were enabled at
* configuration time. If you do not call this function you can select exactly
* which formats you want to support, by using the individual registration
* functions.
*
* @see avcodec_register
* @see av_register_codec_parser
* @see av_register_bitstream_filter
*/
void avcodec_register_all(void);
/**
* Flush buffers, should be called when seeking or when switching to a different stream.
*/
void avcodec_flush_buffers(AVCodecContext *avctx);
void avcodec_default_free_buffers(AVCodecContext *s);
/* misc useful functions */
/**
* Returns a single letter to describe the given picture type \p pict_type.
*
* @param[in] pict_type the picture type
* @return A single character representing the picture type.
*/
char av_get_pict_type_char(int pict_type);
/**
* Returns codec bits per sample.
*
* @param[in] codec_id the codec
* @return Number of bits per sample or zero if unknown for the given codec.
*/
int av_get_bits_per_sample(enum CodecID codec_id);
/**
* Returns sample format bits per sample.
*
* @param[in] sample_fmt the sample format
* @return Number of bits per sample or zero if unknown for the given sample format.
*/
int av_get_bits_per_sample_format(enum SampleFormat sample_fmt);
/* frame parsing */
typedef struct AVCodecParserContext {
void *priv_data;
struct AVCodecParser *parser;
int64_t frame_offset; /* offset of the current frame */
int64_t cur_offset; /* current offset
(incremented by each av_parser_parse()) */
int64_t next_frame_offset; /* offset of the next frame */
/* video info */
int pict_type; /* XXX: Put it back in AVCodecContext. */
/**
* This field is used for proper frame duration computation in lavf.
* It signals, how much longer the frame duration of the current frame
* is compared to normal frame duration.
*
* frame_duration = (1 + repeat_pict) * time_base
*
* It is used by codecs like H.264 to display telecined material.
*/
int repeat_pict; /* XXX: Put it back in AVCodecContext. */
int64_t pts; /* pts of the current frame */
int64_t dts; /* dts of the current frame */
/* private data */
int64_t last_pts;
int64_t last_dts;
int fetch_timestamp;
#define AV_PARSER_PTS_NB 4
int cur_frame_start_index;
int64_t cur_frame_offset[AV_PARSER_PTS_NB];
int64_t cur_frame_pts[AV_PARSER_PTS_NB];
int64_t cur_frame_dts[AV_PARSER_PTS_NB];
int flags;
#define PARSER_FLAG_COMPLETE_FRAMES 0x0001
int64_t offset; ///< byte offset from starting packet start
int64_t cur_frame_end[AV_PARSER_PTS_NB];
/*!
* Set by parser to 1 for key frames and 0 for non-key frames.
* It is initialized to -1, so if the parser doesn't set this flag,
* old-style fallback using FF_I_TYPE picture type as key frames
* will be used.
*/
int key_frame;
/**
* Time difference in stream time base units from the pts of this
* packet to the point at which the output from the decoder has converged
* independent from the availability of previous frames. That is, the
* frames are virtually identical no matter if decoding started from
* the very first frame or from this keyframe.
* Is AV_NOPTS_VALUE if unknown.
* This field is not the display duration of the current frame.
*
* The purpose of this field is to allow seeking in streams that have no
* keyframes in the conventional sense. It corresponds to the
* recovery point SEI in H.264 and match_time_delta in NUT. It is also
* essential for some types of subtitle streams to ensure that all
* subtitles are correctly displayed after seeking.
*/
int64_t convergence_duration;
// Timestamp generation support:
/**
* Synchronization point for start of timestamp generation.
*
* Set to >0 for sync point, 0 for no sync point and <0 for undefined
* (default).
*
* For example, this corresponds to presence of H.264 buffering period
* SEI message.
*/
int dts_sync_point;
/**
* Offset of the current timestamp against last timestamp sync point in
* units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain a valid timestamp offset.
*
* Note that the timestamp of sync point has usually a nonzero
* dts_ref_dts_delta, which refers to the previous sync point. Offset of
* the next frame after timestamp sync point will be usually 1.
*
* For example, this corresponds to H.264 cpb_removal_delay.
*/
int dts_ref_dts_delta;
/**
* Presentation delay of current frame in units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain valid non-negative timestamp delta (presentation time of a frame
* must not lie in the past).
*
* This delay represents the difference between decoding and presentation
* time of the frame.
*
* For example, this corresponds to H.264 dpb_output_delay.
*/
int pts_dts_delta;
} AVCodecParserContext;
typedef struct AVCodecParser {
int codec_ids[5]; /* several codec IDs are permitted */
int priv_data_size;
int (*parser_init)(AVCodecParserContext *s);
int (*parser_parse)(AVCodecParserContext *s,
AVCodecContext *avctx,
const uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size);
void (*parser_close)(AVCodecParserContext *s);
int (*split)(AVCodecContext *avctx, const uint8_t *buf, int buf_size);
struct AVCodecParser *next;
} AVCodecParser;
AVCodecParser *av_parser_next(AVCodecParser *c);
void av_register_codec_parser(AVCodecParser *parser);
AVCodecParserContext *av_parser_init(int codec_id);
int av_parser_parse(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size,
int64_t pts, int64_t dts);
int av_parser_change(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
void av_parser_close(AVCodecParserContext *s);
typedef struct AVBitStreamFilterContext {
void *priv_data;
struct AVBitStreamFilter *filter;
AVCodecParserContext *parser;
struct AVBitStreamFilterContext *next;
} AVBitStreamFilterContext;
typedef struct AVBitStreamFilter {
const char *name;
int priv_data_size;
int (*filter)(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
void (*close)(AVBitStreamFilterContext *bsfc);
struct AVBitStreamFilter *next;
} AVBitStreamFilter;
void av_register_bitstream_filter(AVBitStreamFilter *bsf);
AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
AVBitStreamFilter *av_bitstream_filter_next(AVBitStreamFilter *f);
/* memory */
/**
* Reallocates the given block if it is not large enough, otherwise it
* does nothing.
*
* @see av_realloc
*/
void *av_fast_realloc(void *ptr, unsigned int *size, unsigned int min_size);
/**
* Copy image 'src' to 'dst'.
*/
void av_picture_copy(AVPicture *dst, const AVPicture *src,
int pix_fmt, int width, int height);
/**
* Crop image top and left side.
*/
int av_picture_crop(AVPicture *dst, const AVPicture *src,
int pix_fmt, int top_band, int left_band);
/**
* Pad image.
*/
int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, int pix_fmt,
int padtop, int padbottom, int padleft, int padright, int *color