dnsmasq (2.73-1) unstable; urgency=low

   * New upstream.
   * Tweak field width in cache dump to avoid truncating IPv6
     addresses. (closes: #771557)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 03 Oct 2014 08:49:42 +0000

dnsmasq (2.72-2) unstable; urgency=low

   * Fix build in Debian-kFreeBSD. (closes: #763693)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 02 Oct 2014 22:34:12 +0000

dnsmasq (2.72-1) unstable; urgency=low

   * New upstream.
   * If dns-root-data package is installed, use it to set the DNSSEC
     trust anchor(s). Recommend dns-root-data. (closes: #760460)
   * Handle AD bit correctly in replies from cache. (closes: #761654)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 20 May 2014 21:01:11 +0000

dnsmasq (2.71-1) unstable; urgency=low

   * New upstream.
   * Fix 100% CPU-usage bug when dnsmasq started with cachesize
     set to zero. (LP: #1314697)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 16 May 2014 20:17:10 +0000

dnsmasq (2.70-3) unstable; urgency=medium

   * Write a pid-file, even when being started using systemd, since
     other components may wish to signal dnsmasq.
   * Enable dnsmasq systemd unit on install. Otherwise dnsmasq does not run on
     fresh installations (without administrator handholding) and even worse it
     is disabled on systems switching from sysv to systemd. Modify
     postinst/postrm exactly as dh_systemd would, add dependency on
     init-system-helpers. Closes: #724602

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 11 May 2014 17:45:21 +0000

dnsmasq (2.70-2) unstable; urgency=low

   * Ensure daemon not stared if dnsmasq package has been removed,
     even if dnsmasq-base is still installed. (closes: #746941)
   * Tidy cruft in initscript. (closes: #746940)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 04 May 2014 21:34:11 +0000

dnsmasq (2.70-1) unstable; urgency=low

   * New upstream.

 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 23 Apr 2014 15:14:42 +0000

dnsmasq (2.69-1) unstable; urgency=low

   * New upstream.
   * Set --local-service. (closes: #732610)
     This tells dnsmasq to ignore DNS requests that don't come
     from a local network. It's automatically ignored if
     --interface --except-interface, --listen-address or
     --auth-server exist in the configuration, so for most
     installations, it will have no effect, but for
     otherwise-unconfigured installations, it stops dnsmasq
     from being vulnerable to DNS-reflection attacks.

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 4 Feb 2014 16:28:12 +0000

dnsmasq (2.68-1) unstable; urgency=low

   * New upstream. (closes: #730553)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 8 Dec 2013 15:57:32 +0000

dnsmasq (2.67-1) unstable; urgency=low

   * New upstream.
   * Update resolvconf script. (closes: #720732)

 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 4 Aug 2013 14:53:22 +0000

dnsmasq (2.66-4) unstable; urgency=low

   * Update resolvconf script. (closes: #716908)

 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 4 Aug 2013 14:48:21 +0000

dnsmasq (2.66-3) unstable; urgency=low

   * Update resolvconf script for dnscrypt-proxy integration. (closes: #709179)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 28 May 2013 14:39:51 +0000

dnsmasq (2.66-2) unstable; urgency=low

   * Fix error on startup with some configs. (closes: #709010)

 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 20 May 2013 11:46:11 +0000

dnsmasq (2.66-1) unstable; urgency=low

   * New upstream.
   * Add support for noipset in DEB_BUILD_OPTIONS.

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 22 Feb 2013 21:52:13 +0000

dnsmasq (2.65-1) unstable; urgency=low

   * New upstream.

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 14 Dec 2012 11:34:12 +0000

dnsmasq (2.64-1) unstable; urgency=low

   * New upstream.

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 21 Sep 2012 17:17:22 +0000

dnsmasq (2.63-4) unstable; urgency=low

   * Make pid-file creation immune to symlink attacks. (closes: #686484)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 21 Sep 2012 17:16:34 +0000

dnsmasq (2.63-3) unstable; urgency=low

   * Move adduser dependency to dnsmasq-base. (closes: #686694)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 4 Sep 2012 21:44:15 +0000

dnsmasq (2.63-2) unstable; urgency=low

   * Fix version script to report correct version.
   * Unbotch move of dbus config file by using correct versions in
     Replaces: and Breaks: lines. (closes: #685204)
   * Create dnsmasq user in dnsmasq-base so that Dbus doesn't complain if
     only dnsmasq-base is installed. (closes: #685987)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 28 Aug 2012 16:18:35 +0000

dnsmasq (2.63-1) unstable; urgency=low

   * New upstream.
   * Move /etc/dbus-1/system.d/dnsmasq.conf from dnsmasq to dnsmasq-base.

 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 11 Jun 2012 21:55:35 +0000

dnsmasq (2.62-3) unstable; urgency=low

   * Do resolvconf and /etc/default startup logic when
     starting with systemd. (closes: #675854)

 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 11 Jun 2012 21:50:11 +0000

dnsmasq (2.62-2) unstable; urgency=low

   * Pass LDFLAGS to make to get hardening in linker.

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 7 Jun 2012 09:53:43 +0000

dnsmasq (2.62-1) unstable; urgency=low

   * New upstream.
   * Use dpkg-buildflags. (Enables hardening).

 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 12 May 2012 15:25:23 +0000

dnsmasq (2.61-1) unstable; urgency=low

   * New upstream.
   * Provide "dump-stats" initscript method. (closes: #654656)
   * Add (empty) build-indep and build-arch rules targets.
   * Bump standards-version to 3.9.3
   * Add port option to example dnsmasq.conf (closes: #668386)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 6 Mar 2012 19:45:43 +0000

dnsmasq (2.60-2) unstable; urgency=high

   * Fix DHCPv4 segfault. (closes: #665008)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 23 Mar 2012 09:37:23 +0000

dnsmasq (2.60-1) unstable; urgency=low

   * New upstream.
   * Bump standards-version to 3.9.2
   * Fix typo in example config file. (closes: #654897)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 1 Dec 2011 15:49:33 +0000

dnsmasq (2.59-4) unstable; urgency=low

   * Supply /etc/insserv.conf.d/dnsmasq (closes: #650540)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 1 Dec 2011 11:35:13 +0000

dnsmasq (2.59-3) unstable; urgency=low

   * Stop daemon at runlevels 0, 1 and 6. (closes: #647726)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 26 Nov 2011 15:28:33 +0000

dnsmasq (2.59-2) unstable; urgency=low

   * Fix reported version number.

 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 19 Oct 2011 09:25:53 +0000

dnsmasq (2.59-1) unstable; urgency=low

   * New upstream.
   * Fix IPv6 bind problem (closes: #644345)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 8 Oct 2011 16:34:13 +0000

dnsmasq (2.58-3) unstable; urgency=low

   * Fix resolvconf script location. (closes: #641717)
   * Update systemd service file. (closes: #640095)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 15 Sep 2011 16:33:23 +0000

dnsmasq (2.58-2) unstable; urgency=low

   * Fix resolvconf script. (closes: #639963)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 1 Sep 2011 10:05:23 +0000

dnsmasq (2.58-1) unstable; urgency=low

   * New upstream.
   * Add noconntrack DEB_BUILD_OPTIONS flag.
   * Improve error message when tag:xxx appears
     in --dhcp-host (closes: #627986)
   * Add /usr/lib/resolvconf/packaging-event.d/dnsmasq (closes: #628003)
   * Update resolvconf hook script to sleep only
     when necessary. (closes: #627789)
   * Tweak behaviour of --domain-needed to avoid problems with recursive
     nameservers _downstream_ of dnsmasq. (closes: #630637)
   * Allow processes running as uid dnsmasq to send messages on the DBus,
     so that dnsmasq can return errors. (closes: #635017)
   * Add /lib/systemd/system/dnsmasq.service (closes: #635753)
   * New binary package, dnsmasq-utils, containing dhcp_release and
     dhcp_lease_time from contrib/wrt. Note that these are Linux-specific
     so this package is Architecture: linux-any (closes: #638136)

 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 22 Aug 2011 14:57:03 +0000

dnsmasq (2.57-1) unstable; urgency=low

   * New upstream.
   * Fix typos in example config file. (closes: #606615)
   * Bump standards-version to 3.9.1
   * Add noidn DEB_BUILD_OPTIONS flag.
   * Don't complain about extra command line arguments if
     they are empty, as this breaks libvirt. (closes: #613915)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 18 Feb 2011 09:54:13 +0000

dnsmasq (2.56-1) unstable; urgency=low

   * New upstream.
   * Die if non-option args present on the command-line. (closes: #589885)
   * Tighten up use of IGNORE_RESOLVCONF in initscript. (closes: #575345)
   * Update URL of ISC's explanation of dhcp-authoritative in the example
     configuration file. (closes: #604870)
   * Cosmetic changes to dnsmasq.conf.example. (closes: #598790)
   * More dnsmasq.conf.example fixes. (closes: #606615)
   * Add other resolv.conf locations to FILES section of the manual
     page. (closes: #603505)
   * Clarify configuration for static IP addresses in the absence of
     resolvconf in the Debian readme file. (closes: #604035)
   * Fix handling of obsolete DNSMASQ_INTERFACE and DNSMASQ_EXCEPT
     variables in /etc/default/dnsmasq. (LP: #691329)
   * Provide debian/source/format.

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 17 Dec 2010 13:17:33 +0000

dnsmasq (2.55-2) unstable; urgency=high

   * Fix crash on double free. (closes: #597205)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 19 Sep 2010 21:45:33 +0000

dnsmasq (2.55-1) unstable; urgency=low

   * New upstream.
   * Fix crash when /etc/ethers in use. (closes: #584754)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 6 Jun 2010 20:33:13 +0000

dnsmasq (2.53-1) unstable; urgency=low

   * New upstream.
   * Fix FTBFS on kFreeBSD. (closes: #566334)
   * Teach initscript to check the config file syntax before
     restarting dnsmasq. An error will leave the old dnsmasq still
     running, rather than killing the old daemon and then failing to start
     a new one.
   * Tweak DHCP behaviour when a physical interface has two addresses on
     the same subnet. (closes: #581064)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 20 May 2010 11:41:23 +0000

dnsmasq (2.52-1) unstable; urgency=low

   * New upstream.
   * Be more conservative with "A for A" processing. (closes: #553337)
   * Add README file in /etc/dnsmasq.d to explain what's going on.

 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 14 Jan 2010 09:53:13 +0000

dnsmasq (2.51-1) unstable; urgency=low

   * New upstream.
   * Bump standards-version to 3.8.2 (no changes needed).
   * Ignore files named *.dpkg-old, *.dpkg-new and *.dpkg-dist 
     in /etc/dnsmasq.d
   * Provide a facility in /etc/default/dnsmasq to disable dnsmasq's
     interaction with the resolvconf package. This is needed because
     setting "resolv-file" in /etc/dnsmasq.conf won't override a
     file given on the command line from resolvconf. (closes: #528762)
   * Check for duplicate names/addresses in /etc/ethers. (closes: #523787)
   * Set the system locale in the environment before invoking dnsmasq,
     so that translated messages work, and IDN uses the correct charset.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 4 Oct 2009 14:01:14 +0000


dnsmasq (2.50-1) unstable; urgency=high
   
   * New upstream, fixes remote vulns in TFTP server.
     Bugtraq id: 36120,36121 CVE: 2009-2957,2009-2958	
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 21 Aug 2009 10:25:13 +0000

	
dnsmasq (2.49-1) unstable; urgency=low
   
   * New upstream.
   * Log TFTP "file not found" errors. (closes: #532201)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 8 Jun 2009 22:03:23 +0000
	
dnsmasq (2.48-2) unstable; urgency=low
   
   * Change dnsmasq -> dnsmasq-base dependency to >= to allow binNMU,
     fixes Lintian error.
   * Bump standards-version to 3.8.1
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 5 Jun 2009 10:58:33 +0000

dnsmasq (2.48-1) unstable; urgency=low

   * New upstream.
   * Detect and ignore duplicate configuration files. (closes: #516234)
   * Add 2 second sleep between stop and start during initscript restart.
   * Make dependency on dnsmasq-base in dnsmasq package versioned, so that
     installing the latest dnsmasq will install the latest dnsmasq-base
     too. (closes: #523955)
   * Add nodhcp DEB_BUILD_OPTIONS option.
		
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 29 May 2009 10:20:23 +0000

dnsmasq (2.47-3) unstable; urgency=low

   * Fix bashism in init script. (closes: #514397)
   * Tweak logging in init script.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 7 Feb 2009 19:25:23 +0000

dnsmasq (2.47-2) unstable; urgency=low

   * Check that /etc/init.d/dnsmasq is executable in postinst in case
     the daemon has been  disabled that way. (closes: #514314)
   * Ensure that /var/run/dnsmasq exists and has the right permissions
     before running dnsmasq. On some systems /var/run is cleared over 
     reboot. (closes: #514317)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 6 Feb 2009 09:38:21 +0000
	
dnsmasq (2.47-1) unstable; urgency=low

   * New upstream.
   * Handle the "ENABLED" flag in the init script a bit more 
     intelligently. The "stop" and "status" functions continue
     to work even when disabled, but a failed "stop" becomes 
     silent and returns zero exit code.
   * Don't explicitly kill dnsmasq at system shutdown, rely on the 
     sendsigs script instead which is quicker. (closes: #506734)
   * Store the PID-file in /var/run/dnsmasq. This directory is owned by
     user "dnsmasq", so that dnsmasq can delete the PID-file on
     shutdown. This ensures that the the PID-file goes even when dnsmasq 
     is stopped by sendsigs. (closes: #508560) 
   * Bump standards-version to 3.8.0 (no changes required.)
   * /usr/sbin/adduser -> adduser in postinst. Lintian fix.
   * Handle IPv6 addresses in "tentative" state better. (closes: #507646) 
   * Add DBus introspection support. (closes: #508774)
   * Fix Dbus configuration. (closes: #510649)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 2 Feb 2009 13:39:11 +0000

dnsmasq (2.46-1) unstable; urgency=low

   * New upstream. (closes: #499162) (closes: #499007)
   * Remove from init script start-stop-daemon call to kill
     child processes. This is not needed since dnsmasq is 
     carefully written to kill child processes, and it interacts
     badly with "private" instances of dnsmasq. (closes: #505523)
   * Provide /etc/dnsmasq.d and alter the installed /etc/default/dnsmasq
     so that /etc/dnsmasq.d is read. This provides a drop-directory where
     libvirt can add options to make the system dnsmasq automatically 
     play nice with libvirt's private instances. (closes: #505522)
	        
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 13 Nov 2008 20:15:31 +0000

dnsmasq (2.45-1) unstable; urgency=high

   * New upstream - fixes regression when min-port not set.
	        
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 20 Jul 2008 19:27:11 +0000
	
dnsmasq (2.44-1) unstable; urgency=high

   * New upstream - bugfix release for 2.43.
   * Fix crash in netlink code. (closes: #491289)
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 11 Jul 2008 19:39:10 +0000

dnsmasq (2.43-1) unstable; urgency=high

   * New upstream.
   * Implement source-port randomisation and better random
     number generator as defence against CVE-2008-1447 (closes: #490123)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 17 Jun 2008 11:55:38 +0000

dnsmasq (2.42-4) unstable; urgency=low

   * Fix botch in postinst introduced in 2.42-2. (closes: #486616)
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 17 Jun 2008 11:39:10 +0000

dnsmasq (2.42-3) unstable; urgency=low

   * Fix thinko in init script, breaks status command. (closes: #486455)
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 16 Jun 2008 11:26:20 +0000

dnsmasq (2.42-2) unstable; urgency=low

   * Error check in postinst file (closes: #485645)
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 10 Jun 2008 20:25:10 +0000

dnsmasq (2.42-1) unstable; urgency=low

   * New upstream.
   * Fix manpage typos. (closes: #468762)
   * Use LSB log_*_msg rather than echo in init script. (closes: #473117)
   * Fix agent-id echo problem. (closes: #473015)
   * Fixup changing /usr/share/doc/dnsmasq to symlink. (closes: #468763)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 27 Feb 2008 21:15:28 +0000

dnsmasq (2.41-2) unstable; urgency=low

   * Fix rules to build binary-arch and binary-indep correctly.
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 27 Feb 2008 19:57:10 +0000

dnsmasq (2.41-1) unstable; urgency=low

   * New upstream.
   * Fix typo. (closes: #448038)
   * Fix DHCP problem interoperating with Sony Ericsson K610i (closes: #451871)
   * Split binary packages into dnsmasq and dnsmasq-base (closes: #463407)
   * Add warnings about bad effects of --filterwin2k to default config
     file. (closes: #464357) 
   * Don't declare Provides: $named in LSB header. (closes: #464512)
   * Remove conflict with pdnsd. (closes: #464691)
   * Add ability to disable dnsmasq in /etc/default/dnsmasq. (closes: #465062)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 31 Jan 2008 20:25:28 +0000

dnsmasq (2.40-1) unstable; urgency=low

   * New upstream.
   * Fix manpage typo. (closes: #429412)
   * Fix dnsmasq.conf typos (closes: #429929)
   * Handle DEB_BUILD_OPTIONS nostrip and noopt (closes: #436784)
   * Add DEB_BUILD_OPTIONS for nodocs, notftp, noipv6, 
     nodbus, noi18n and nortc.
   * Create DEBIAN/md5sums file in package.
   * Add status function to init script. (closes: #439316)
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 9 Aug 2007 10:24:18 +0000

dnsmasq (2.39-1) unstable; urgency=low

   * New upstream.
   * Provide example config file in /usr/share/doc/dnsmasq/examples
     as well as /etc/dnsmasq.conf, so it's available for reference.
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 13 Feb 2007 10:02:38 +0000

dnsmasq (2.38-1) unstable; urgency=low

   * New upstream (closes: #410185)
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 6 Feb 2007 21:14:58 +0000

dnsmasq (2.37-1) unstable; urgency=low

   * New upstream.
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 25 Jan 2007 10:44:18 +0000

dnsmasq (2.36-1) unstable; urgency=low

   * New upstream. (closes: #400037)
   * Don't fail to purge if deluser command is not available.
   * Add one second sleep to resolvconf script. (closes: #398961)
   * Fix dnsmasq.conf typo (closes: #405314) 
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 31 Oct 2006 10:24:58 +0000

dnsmasq (2.35-1) unstable; urgency=low

   * New upstream.
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 18 Oct 2006 09:23:28 +0000

dnsmasq (2.34-1) unstable; urgency=low

   * New upstream.
   * Includes --clear-on-reload flag. (loses: #391654)
   * Don't any longer set the "domain-needed" and "bogus-priv" flags in the
   * the default-installed dnsmasq.conf. These can generate puzzling 
   * behaviour for people who get them without asking.
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 9 Aug 2006 09:23:28 +0000

dnsmasq (2.33-1) unstable; urgency=low

   * New upstream.
   * Remove bashism from Makefile (closes: #375409)
   * Added Provides: $named to LSB header in init script.
   * Add --dns-forward-max flag. (closes: #377506)
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 25 June 2006 18:03:13 +0000

dnsmasq (2.32-2) unstable; urgency=low

   * Added LSB tags to init.d startup script. (closes: #374650)
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 25 June 2006 17:55:11 +0000

dnsmasq (2.32-1) unstable; urgency=low

   * New upstream.
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 8 May 2006 09:23:28 +0000

dnsmasq (2.31-1) unstable; urgency=high

   * New upstream. (closes: #364800)
   * Compile in Dbus support now that suitable Dbus packages exist.
   * Don't stop an old dnsmasq process, until a new one is ready, 
     when upgrading. (closes: #366224)
   * Move to standards-version 3.7.2 (no changes needed).
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 6 May 2006 11:58:22 +0000

dnsmasq (2.30-1) unstable; urgency=low

   * New upstream, fixes crash with DHCP broadcast replies.
				
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 23 Apr 2006 14:58:22 +0000

dnsmasq (2.29-1) unstable; urgency=low

   * New upstream. (closes: #363244) (closes: #363340)
   * Made config options clearer in src/config.h and 
     clarify ISC integration status in Debian readme. (closes: #364250)
			
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 18 Apr 2006 10:26:12 +0000

dnsmasq (2.28-1) unstable; urgency=low

   * New upstream. (closes: #359956) (closes: #362499)
   * Added firestarter info to FAQ. (closes: #359139)
		
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 14 Mar 2006 19:20:12 +0000

dnsmasq (2.27-1) unstable; urgency=low

   * New upstream.
   * Workaround buggy Microsoft DHCP clients. (closes: #355008)
		
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 1 Feb 2006 17:05:12 +0000

dnsmasq (2.26-1) unstable; urgency=high

   * New upstream. (Fixes possible crash in 2.25, hence urgency).
		
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 22 Jan 2006 11:05:22 +0000

dnsmasq (2.25-1) unstable; urgency=low

   * Remove bashisms in postinst and prerm scripts.
   * Remove misconcieved dependency on locales.	
   * Depend on adduser.
		
 -- Simon Kelley <simon@thekelleys.org.uk>  Thu, 01 Dec 2005 21:02:12 +0000

dnsmasq (2.24-1) unstable; urgency=low

   * New upstream. (closes: #330422)
   * Fix typo and clean up dnsmasq.conf (closes: #326057) (closes: #304446)
   * Add build support for I18N and gettext.
   * Fixed manpage typos. (closes: #336413)
   * Create a dnsmasq-unique userid for the daemon to run as. (closes: #338353)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 03 Sep 2005 20:02:32 +0000

dnsmasq (2.23-1) unstable; urgency=low

   * New upstream. (closes: #302501) (closes: #315794)
   * Fix manpage typos. (closes: #304984)
   * Add support for DNSMASQ_EXCEPT in /etc/defaults/dnsmasq.
     putting "lo" in this also disables resolvconf support.
   * No longer delete pre-existing /etc/init.d symlinks. The 
     change in default runlevels which neccesitated this 
     is now ancient history and anyway the startup script now 
     behaves when called twice. (closes: #312111)
   * Tightened config-file parser. (closes: #317030)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 02 Aug 2005 13:17:22 +0000

dnsmasq (2.22-2) unstable; urgency=low

   * Make the resolv.conf polling code resistant to 
     backwards-moving system clocks. (closes: #306117) (closes: #300694)
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 04 May 2005 13:25:23 +0000

dnsmasq (2.22-1) unstable; urgency=low

   * New upstream.
   * Fixed broken-ness when read /etc/ethers. (closes: #301999)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Thur, 24 Mar 2005 17:10:13 +0000

dnsmasq (2.21-1) unstable; urgency=low

   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 29 Jan 2005 16:05:13 +0000

dnsmasq (2.20-1) unstable; urgency=low

   * New upstream.
   * Fix shadowed CNAME-target problem. (closes: #286654)
   * Add --localise-queries option. (closes: #291367)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 17 Dec 2004 17:35:23 +0000

dnsmasq (2.19-1) unstable; urgency=high

   * New upstream.
   * Fix another IPv6 interface enumeration problem. (closes: #285182)
   * Uploading at high priority since 285182 is really RC.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 11 Dec 2004 20:39:33 +0000

dnsmasq (2.18-2) unstable; urgency=low

   * Revert startup to not start from rcS. Starting in rcS
   * causes problems if interfaces are not available at that
   * point. Users who need this facility should  manually 
   * make rcS.d symlinks. (closes: #283239)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 27 Nov 2004 16:33:12 +0000
	
dnsmasq (2.18-1) unstable; urgency=low

   * New upstream.
   * Reset cache statistics when clearing the cache. (closes: #281817)
   * Fix problems with bind-interfaces and IPv6. (closes: #282192)
   * Fix problems upgrading when restarting dnsmasq fails.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 16 Nov 2004 17:33:32 +0000

dnsmasq (2.17-1) unstable; urgency=high

   * New upstream - fixes crash, hence high urgency. 
   * Clarified log message when a record in /etc/hosts 
     and a DHCP name clash. (closes: #275420)
   * Start dnsmasq just before portmap and nfs mounts from rcS.d
     DNS is required at this stage to use the net. (closes: #280434)
   * Make "bind-interfaces" apply to IPv6 interfaces. (closes: #278492)
   * Allow a list if interfaces as arg to the --interface and
     --except-interface options. (closes: #279063) 

 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 26 Oct 2004 20:39:33 +0000

dnsmasq (2.16-2) unstable; urgency=high

   * Rename variable in cache.c which clashes with C headers
     under gcc-3.4 (closes: #277893)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 25 Oct 2004 16:03:24 +0000

dnsmasq (2.16-1) unstable; urgency=high

   * New upstream.
   * Fixes interaction with Linux 2.4.x and 2.6.x not-quite-POSIX
     select behavior, which can cause hangs when receiving UDP
     packets with bad checksum.
   * Fix bad interaction with polipo. (closes: #275754)
   * Cache CNAMEs better. (closes: #276289)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 04 Oct 2004 15:25:44 +0000

dnsmasq (2.15-1) unstable; urgency=low

   * New upstream.
   * Fix NXDOMAIN/NODATA confusion for locally known names. (closes: #271564)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 15 Sep 2004 15:01:44 +0000

dnsmasq (2.14-1) unstable; urgency=low

   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 28 Aug 2004 20:39:33 +0000

dnsmasq (2.13-1) unstable; urgency=high

   * New upstream - fixes crash. (closes #265313)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Thur, 12 Aug 2004 12:45:23 +0000

dnsmasq (2.12-1) unstable; urgency=low

   * New upstream.
   * Log types of incoming queries (closes: #230123).
   * Don't set "filterwin2k" by default in the included
     config file - it breaks SRV lookups and Kerberos.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 8 Aug 2004 19:58:13 +0000

dnsmasq (2.11-1) unstable; urgency=low

   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 28 July 2004 21:59:33 +0000

dnsmasq (2.10-1) unstable; urgency=low

   * New upstream.
   * Allow query-port less than 1024 (closes: #236586)
   * Change behaviour of --bogus-priv (closes: #254711)
   * Match existing leases by MAC address when a client stops
     using client-id or they get suppressed by dnsmasq. (closes: #258519)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thur, 24 June 2004 20:55:42 +0000

dnsmasq (2.9-2) unstable; urgency=low

   * Fix typo in debian/control (closes: #255762)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 23 Jun 2004 20:40:13 +0000

dnsmasq (2.9-1) unstable; urgency=low

   * New upstream.
   * New version has improved server selection logic (closes: #251097)
   * Improved initscript (closes: #252229)
   * Conflict with old resolvconf versions to maintain compatibility.
   * Updated README.debian (closes: #253429)
   * Changed startup message to mention DHCP as well as DNS.
   * New resolvconf update script (closes: #254765)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Wed, 26 May 2004 12:35:23 +0000

dnsmasq (2.8-1) unstable; urgency=low

   * New upstream.
   * Fixes problem with zero-length hostnames which can lose
     DHCP leases over a restart. (closes: #248829)

 -- Simon Kelley <simon@thekelleys.org.uk>  Thur, 13 May 2004 18:40:12 +0000
	
dnsmasq (2.7-2) unstable; urgency=low

   * New version of resolvconf script from Thomas Hood with the 
     following changes: (closes: #247695)
   * Doesn't include nameservers listed in the lo.inet or lo.inet6 interface
     records created by "ifup lo"
   * Lists addresses in a specified order (by interface name)
   * Eliminates duplicate nameserver addresses
   * Updates /var/run/dnsmasq/resolv.conf atomically
   * Doesn't generate empty lines
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Tue, 11 May 2004 22:35:12 +0000

dnsmasq (2.7-1) unstable; urgency=low

   * New upstream.

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 18 Apr 2004 20:00:23 +0000

dnsmasq (2.6-3) unstable; urgency=low

   * Removed reload command from start script and moved force-reload
     to be equivalent to restart. This is needed to be policy compliant
     since SIHGUP doesn't cause dnsmasq to reload its configuration file,
     only the /etc/hosts, /etc/resolv.conf etc. (closes: #244208)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 18 Apr 2004 14:40:51 +0000

dnsmasq (2.6-2) unstable; urgency=low

   * Added Conflict with pdnsd (closes: #242731).
     Rationale: dnsmasq used to conflict with all the DNS servers
     in Debian, but that was removed because some people wished
     to run with dnsmasq listening on one interface and another DNS
     server listening on another interface. However AFAIK it is not
     possible to make pdnsd listen on a subset of a hosts interfaces,
     so there is no scenario where running pdnsd and dnsmasq on the same
     host would be useful, hence the conflict goes back.
   * Added note about the --bind-interfaces option to
     readme.Debian (closes: #241700)

 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 13 Apr 2004 18:37:55 +0000
      
dnsmasq (2.6-1) unstable; urgency=low

   * New upstream.
   * New version adds back ability to read ISC dhcpd lease files
     for backwards compatibility. (closes: #229684) (closes: #236421)
   * Fix parsing of # characters in options file. (closes: #241199)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 21 Mar 2004 19:59:25 +0000
      
dnsmasq (2.5-1) unstable; urgency=low

   * New upstream, includes fix for IP-alias related 
     problem. (closes: #238268)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 14 Mar 2004 08:32:43 +0000

dnsmasq (2.4-3) unstable; urgency=low

   * Fixed "bind-interfaces" option, even when
     an "interface" option is given also.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 12 Mar 2004 08:14:23 +0000

dnsmasq (2.4-2) unstable; urgency=low

   * Fixed "bind-interfaces" option (closes: #237543).
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 12 Mar 2004 07:30:25 +0000

dnsmasq (2.4-1) unstable; urgency=low

   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Thurs, 11 Mar 2004 07:59:55 +0000

dnsmasq (2.3-1) unstable; urgency=low

   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 03 Feb 2004 20:33:10 +0000

dnsmasq (2.2-1) unstable; urgency=low

   * New upstream. (fixes no DHCP with IPv6 problem)
   * Restart (old) daemon on abort-upgrade. (closes: #230286)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 30 Jan 2004 10:23:00 +0000

dnsmasq (2.1-1) unstable; urgency=low

   * New upstream.
   * Allow addresses in /etc/hosts to be used for 
     DHCP leases (closes: #229681)
   * Fix lease time processing. (closes: #229682) (closes: #229687)
   * Fix example conf file. (closes: #229683) (closes: #229701)
   * Allow address 0.0.0.0 to mean "self" in dhcp-option. (closes: #229685)
   * Cope with ENODEV return from bind of 
     IPv6 server socket (closes: #229607) 
   * Document the strict-order option in dnsmasq.conf (closes: #229272)
   * Fix local-only domain setting. (closes: #229846)
   * Updates Debian readme to mention resolvconf and point at the
     local copy of RFC2132.

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri,  23 Jan 2004 14:38:29 +0000

dnsmasq (2.0-1) unstable; urgency=low

   * New upstream: This removes the ability to read the 
     the leases file of ISC DHCP and replaces it with a built-in 
     DHCP server. Apologies in advance for breaking backwards 
     compatibilty, but this replaces a bit of a hack (the ISC stuff)
     with a nicely engineered and much more apropriate solution.
     Wearing my upstream-maintainer hat, I want to lose the hack now,
     rather than have to support it into Sarge.
   * New upstream closes some bugs since they become 
     irrelevant. (closes: #197295)
   * Ensure that /var/run and /var/lib/misc exist.
   * Remove sed dependency, which was a mistake.
   * Remove extraneous "build" file. (closes: #226994)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun,  16 Jan 2004 19:35:49 +0000

dnsmasq (1.18-2) unstable; urgency=low
        
   * Fixed manpage typo (closes: #220961)
   * Added dependency for sed. (closes: #222401)
   * Check for complete resolvconf installation before 
     calling it. (closes: #223442)
   * Added Links section to doc.html
        
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 27 Dec 2003 20:21:15 +0000
   
dnsmasq (1.18-1) unstable; urgency=low

   * New upstream which does round-robin. (closes: #215460)
   * Removed conflicts with other dns servers since it is now
     possible to control exactly where dnsmasq listens on multi-homed 
     hosts, making co-existance with another nameserver 
     a viable proposition. (closes #176163)
   * New upstream allows _ in hostnames and check for illegal
     names in /etc/hosts. (closes: #218842)

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 17 Oct 2003 16:23:14 +0000

dnsmasq (1.17-1) unstable; urgency=high

   * New upstream (closes: #212680)

 -- Simon Kelley <simon@thekelleys.org.uk>  Wed,  8 Oct 2003 14:38:29 +0000

dnsmasq (1.16-1) unstable; urgency=low
  
   * New upstream.
   * Renamed Debian README to the standard README.Debian. (closes: #211577)
   * Updated the installed /etc/dnsmasq.conf to reflect new options.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 16 Sep 2003 23:18:59 +0000

dnsmasq (1.15-1) unstable; urgency=low
  
   * New upstream.
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 16 Sep 2003 21:48:49 +0000

dnsmasq (1.14-1) unstable; urgency=low
  
   * New upstream.
   * Use invoke-rc.d in postinst and prerm scripts when available.
   * Stop dnsmasq later (at priority 85). (closes: #200625)
   * Updated /etc/resolvconf/update.d/dnsmasq. (closes: #202609)
   * Suggest resolvconf. (closes: #208093)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues,  2 Sep 2003 16:43:29 +0000

dnsmasq (1.13-4) unstable; urgency=high
  
   * Ignore failures in stopping existing dnsmasq 
     processes. (closes: #204127) (closes: #204129)
   * Added download source to copyright. (closes: #206647)
	
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 2 Sep 2003 15:28:28 +0000

dnsmasq (1.13-3) unstable; urgency=low
  
   * Moved /etc/resolvconf/update.d/dnsmasq script into this package.
   * Don't call resolvconf from /etc/init.d/dnsmasq if dnsmasq fails
     to start. (Patch from Thomas Hood.)

 -- Simon Kelley <simon@thekelleys.org.uk>  Mon,  7 Jul 2003 20:55:29 +0000

dnsmasq (1.13-2) unstable; urgency=low
  
   * Added support for the resolvconf nameserver configuration package.

 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 22 Jun 2003 20:30:19 +0000

dnsmasq (1.13-1) unstable; urgency=low

   * New upstream.
   * Added new options to the default dnsmasq.conf.
   * Default config now reads /var/lib/dhcp/dhcp.leases (closes: #195185)
   * Added option to disable negative caching. (closes: #194274)
   * Added David Coe's query port patch. (closes: #196578)

 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 31 May 2003 18:10:29 +0000

dnsmasq (1.12-1) unstable; urgency=low

   * New upstream.
   * Added examples of "local" and "address" options to dnsmasq.conf.
   * Remove /usr/doc symlink code.
   * Remove period from end of description field.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 8 Mar 2003 12:16:09 +0000

dnsmasq (1.11-2) unstable; urgency=low

   * Fixed thinko in example dnsmasq.conf. (closes: #180410)
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 24 Feb 2003 20:06:19 +0000

dnsmasq (1.11-1) unstable; urgency=low

   * New uptream.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Tues, 12 Jan 2003 22:25:17 -0100

dnsmasq (1.10-1) unstable; urgency=low

   * New uptream.
   * Force service to stop in postinst before restarting. I don't
     understand the circumstances under which it would still be running at
     this point, but this is the correct fix anyway. (closes: #169718) 
   * Add /etc/dnsmasq.conf as a conffile and add a comment to 
     /etc/default/dnsmasq deprecating its use and recommending 
     /etc/dnsmasq.conf instead, since upstream now supports this.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 9 Oct 2002 19:05:34 -0100

dnsmasq (1.9-1) unstable; urgency=low

   * New uptream.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 23 Sept 2002 21:35:07 -0100

dnsmasq (1.8-1) unstable; urgency=low
  
   * New upstream.
    
 -- Simon Kelley <simon@thekelleys.org.uk>  Mon, 12 Aug 2002 21:56:17 -0100

dnsmasq (1.7-1) unstable; urgency=low
  
   * New upstream including better group-id manipulation. (closes: #152212)
   * Conflict with bind9 (closes: #151812)
   * Added more options to startup script. (closes: #148535)
    
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 14 July 2002 20:23:14 -0100

dnsmasq (1.6-1) unstable; urgency=low
  
   * New upstream.
   * Fixed documentation typos. (closes: #144637)
   * Fixed failure to remove package if daemon not running. (closes: #147083)
   * Changed upload to tarball-and-diff. (closes: #144638)
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 19 May 2002 22:30:17 -0100

dnsmasq (1.5-1) unstable; urgency=medium
  
   * New upstream (includes hotmail.com fix).
   * Fixed DHCP lease file bug. (closes: #143778)
   * Fixed failure of "reload" command in startup script (closes: #141021)
   * Allow more than one interface name in the DNSMASQ_INTERFACE variable.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 14 Apr 2002 16:39:13 -0100
  
dnsmasq (1.4-2) unstable; urgency=low
  
    * Fixed snafu in startup script (closes: #139760)
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 24 Mar 2002 23:06:18 +0000
  
dnsmasq (1.4-1) unstable; urgency=low
  
  * New upstream
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Thurs, 7 Mar 2002 21:02:05 +0000
  
dnsmasq (1.3-1) unstable; urgency=low
  
  * New upstream

 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 15 Feb 2002 20:45:01 +0000
  
dnsmasq (1.2-4) unstable; urgency=low
  
  * Updated standards-version.
  * More aggressive strip of binaries.
  * Added depends: netbase.
  * distribution->unstable for upload.
  * Updated readme.Debian since config in /etc/default/dnsmasq now.
  * Updated readme.Debian to reflect fact that this package is official now!
 
 -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 15 Feb 2002 20:45:01 +0000
  
dnsmasq (1.2-3) stable; urgency=low
  
  * Added Suggests: and Conflicts: fields to control file.
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Thurs, 14 Feb 2002 20:33:47 +0000
  
dnsmasq (1.2-2) stable; urgency=low
 
  * Many packaging fixes, to please lintian
  * Added extended description.
  * Fixed copyright file.
  * Compressed everything in /usr/share/doc/dnsmasq.
  * Added code to remove /usr/doc/dnsmasq to prerm script.
  * Moved configuration from /etc/init.d/dnsmasq to /etc/default/dnsmasq
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 02 Feb 2002 18:54:37 +0000
  
dnsmasq (1.2-1) stable; urgency=low
 
  * New upstream
  * Added more options to startup script
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 20 Dec 2001 21:15:07 +0000

dnsmasq (1.1-2) stable; urgency=low
 
  * New upstream
  * Strip binary
  * Moved manpage from section 1 to section 8
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 21 Oct 2001 17:32:04 -0100

dnsmasq (1.0-1) unstable; urgency=low
 
  * New upstream
  
 -- Simon Kelley <simon@thekelleys.org.uk>  Sat, 10 Oct 2001 15:52:06 -0100
  
dnsmasq (0.996-1) unstable; urgency=low
  
  * New upstream
  
 -- Simon Kelley <simon@thkelleys.org.uk>  Fri, 26 Oct 2001 10:32:06 -0100

dnsmasq (0.995-1) unstable; urgency=low
  
  * New upstream
  
 -- Simon Kelley <simon@thkelleys.org.uk>  Tue, 09 Oct 2001 16:39:07 -0100

dnsmasq (0.994-1) unstable; urgency=low
  
  * New upstream
  
 -- Simon Kelley <simon@thkelleys.org.uk>  Sat, 07 Oct 2001 15:45:04 -0100

dnsmasq (0.992-1) unstable; urgency=low

  * New upstream

 -- Simon Kelley <simon@thkelleys.org.uk>  Fri, 31 Aug 2001 16:17:00 -0100

dnsmasq (0.98-1) unstable; urgency=low

  * New upstream

 -- Simon Kelley <simon@thkelleys.org.uk>  Wed, 11 Jul 2001 11:31:00 -0100

dnsmasq (0.96-1) unstable; urgency=low

  * Fixed thinko in cache code..

 -- Simon Kelley <simon@thkelleys.org.uk>  Sat, 07 Jul 2001 18:52:00 -0100

dnsmasq (0.95-1) unstable; urgency=low

  * Initial Release.

 -- Simon Kelley <simon@thkelleys.org.uk>  Sat, 29 Aug 1998 20:27:27 -0400