| HID PICS for the PTS tool. |
| |
| PTS version: 5.1 |
| |
| * - different than PTS defaults |
| # - not yet implemented/supported |
| |
| M - mandatory |
| O - optional |
| |
| Roles |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_1_1 True (*) Role: Host, Report protocol (O.1) |
| TSPC_HID_1_2 False Role: HID Role (O.1) |
| TSPC_HID_1_3 False Role: Host, Boot protocol (O.1) |
| ------------------------------------------------------------------------------- |
| O.1: It is Mandatory to support One of these roles. |
| ------------------------------------------------------------------------------- |
| |
| |
| Application Procedures |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_2_1 True Host: Establish HID connection (M.1) |
| TSPC_HID_2_2 True Host: Accept HID connection (M.1) |
| TSPC_HID_2_3 True Host: Terminate HID connection (M.1) |
| TSPC_HID_2_4 True Host: Accept termination of HID connection (M.1) |
| TSPC_HID_2_5 True Host: Support for virtual cables (M.1) |
| TSPC_HID_2_6 True Host: HID initiated connection (M.1) |
| TSPC_HID_2_7 True Host: Host initiated connection (M.1) |
| TSPC_HID_2_8 True Host: Host data transfer to HID (C.1) |
| TSPC_HID_2_9 True Host: HID data transfer to Host (C.1) |
| TSPC_HID_2_10 False Host: Boot mode data transfer to Host (C.2) |
| TSPC_HID_2_11 False Host : Boot mode data transfer to HID (C.2) |
| TSPC_HID_2_12 False Host : Support for Application to send |
| GET_Report (O) |
| TSPC_HID_2_13 False Host : Support for Application to send |
| SET_REPORT (O) |
| TSPC_HID_2_14 False Host : Support for sending HCI_CONTROL with |
| VIRTUAL_CABLE_UNPLUG (C.3) |
| TSPC_HID_2_15 False Host : Support for receiving HCI_CONTROL with |
| VIRTUAL_CABLE_UNPLUG (C.2) |
| ------------------------------------------------------------------------------- |
| M.1: Mandatory to support IF (TSPC_HID_1_1) supported. |
| C.1: Optional for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Mandatory |
| for Host Role (TSPC_HID_1_1). |
| C.2: Mandatory for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Optional. |
| C.3: Optional IF (TSPC_HID_2_5) supported, otherwise excluded. |
| ------------------------------------------------------------------------------- |
| |
| |
| Device to Host Transfers |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_3_1 False Host : Data reports larger than host MTU on |
| Control channel (O) |
| TSPC_HID_3_2 True (*) Host : Data reports larger than host MTU on |
| Interrupt channel (C.1) |
| TSPC_HID_3_3 True (*) Host : Data reports to host (C.1) |
| TSPC_HID_3_4 False Host : Boot mode reports to host (C.2) |
| ------------------------------------------------------------------------------- |
| C.1: Excluded for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Mandatory if |
| (TSPC_HID_2_12), otherwise Optional. |
| C.2: Mandatory for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Optional. |
| ------------------------------------------------------------------------------- |
| |
| |
| Host to Device Transfers |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_4_1 False Host : Data reports larger than device MTU on |
| Control channel (C.1) |
| TSPC_HID_4_2 False Host : Data reports larger than device MTU on |
| Interrupt channel (C.1) |
| TSPC_HID_4_3 True (*) Host : Data reports to device (C.2) |
| TSPC_HID_4_4 False Host : Boot mode reports to device (O) |
| ------------------------------------------------------------------------------- |
| C.1: Excluded for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Optional |
| C.2: Excluded for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Mandatory for |
| Host Role (TSPC_HID_1_1). |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Control Commands |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_5_1 False Host : Set_Protocol command (C.1) |
| TSPC_HID_5_2 False Host : Get_Protocol command (C.1) |
| TSPC_HID_5_3 False Host : Set_Idle command (O) |
| TSPC_HID_5_4 False Host : Get_Idle command (O) |
| TSPC_HID_5_5 False (*) Host : Set_Report command (M.1) |
| TSPC_HID_5_6 False (*) Host : Get_Report command (M.2) |
| ------------------------------------------------------------------------------- |
| M.1: Mandatory IF (TSPC_HID_1_1) supported AND (TSPC_HID_2_13) supported. |
| C.1: Mandatory for Boot Mode Only Hosts (TSPC_HID_1_3); otherwise Optional. |
| If either Set_Protocol or Get_Protocol supported, both are Mandatory. |
| M.2: Mandatory IF (TSPC_HID_1_1) Supported AND (TSPC_HID_2_12) Supported |
| ------------------------------------------------------------------------------- |
| |
| |
| Host Link Manager Procedures |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_6_1 False Host : Initiate Authentication before |
| connection completed (C.1) |
| TSPC_HID_6_2 False Host : Initiate Authentication after connection |
| completed (C.1) |
| TSPC_HID_6_3 False Host : Initiate pairing before connection |
| completed (C.2) |
| TSPC_HID_6_4 False Host : Initiate pairing after connection |
| completed (C.2) |
| TSPC_HID_6_5 False Host : Encryption (O) |
| TSPC_HID_6_6 False Host : Initiate encryption (C.3) |
| TSPC_HID_6_7 False Host : Accept encryption requests (C.3) |
| TSPC_HID_6_8 True Host : Role switch (Master/Slave) (M.1) |
| TSPC_HID_6_9 True Host : Request Master Slave switch (M.1) |
| TSPC_HID_6_10 True Host : Accept Master Slave switch requests (M.1) |
| TSPC_HID_6_11 False Host : Hold mode (O) |
| TSPC_HID_6_12 True Host : Sniff mode (M.1) |
| TSPC_HID_6_13 False Host : Park mode (O) |
| ------------------------------------------------------------------------------- |
| C.1: If Host Authentication supported, both (TSPC_HID_6_1) AND (TSPC_HID_6_2) |
| must be supported. |
| C.2: If Pairing supported both (TSPC_HID_6_3) AND (TSPC_HID_6_4) must |
| be supported. |
| M.1: Mandatory IF (TSPC_HID_1_1) supported. |
| C.3: Mandatory IF (TSPC_HID_6_5) encryption supported. |
| ------------------------------------------------------------------------------- |
| |
| |
| Host Link Control Requirements |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_7_1 True Host : Supports inquiry, 79 channel (M.1) |
| TSPC_HID_7_2 False (*) Host : Supports inquiry scan, 79 channel (X) |
| ------------------------------------------------------------------------------- |
| M.1: Mandatory to support IF (TSPC_HID_1_1) supported. |
| X: Feature should not be used by a Host, but can be supported in LM. |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Device Roles |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_8_1 False Hid : Pointing HID (O.1) |
| TSPC_HID_8_2 False Hid : Keyboard HID (O.1) |
| TSPC_HID_8_3 False Hid : Identification HID (O.1) |
| TSPC_HID_8_4 False Hid : Other HID (O.1) |
| ------------------------------------------------------------------------------- |
| O.1: It is Mandatory to support One of these roles IF (TSPC_HID_1_2) |
| is selected |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Application Procedures |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_9_1 False Hid : Establish HID connection (O) |
| TSPC_HID_9_2 False (*) Hid : Accept HID connection (M.1) |
| TSPC_HID_9_3 False Hid : Terminate HID connection (O) |
| TSPC_HID_9_4 False (*) Hid : Accept Termination of HID connection (M.1) |
| TSPC_HID_9_5 False Hid : Support for virtual cables (O) |
| TSPC_HID_9_6 False Hid : HID initiated reconnection (C.1) |
| TSPC_HID_9_7 False Hid : Host initiated reconnection (C.1) |
| TSPC_HID_9_8 False Hid : Host data transfer to HID (C.2) |
| TSPC_HID_9_9 False Hid : HID data transfer to Host (C.2) |
| TSPC_HID_9_10 False Hid : HID Boot mode data transfer to Host (C.3) |
| TSPC_HID_9_11 False Hid : Host Boot mode data transfer to HID (C.4) |
| TSPC_HID_9_12 False Hid : Output reports declared (C.4) |
| TSPC_HID_9_13 False Hid : Input reports declared (C.3) |
| TSPC_HID_9_14 False Hid : Feature reports declared (O) |
| TSPC_HID_9_15 False Hid : Support for sending HCI_CONTROL with |
| VIRTUAL_CABLE_UNPLUG (C.5) |
| TSPC_HID_9_16 False Hid : Support for receiving HCI_CONTROL with |
| VIRTUAL_CABLE_UNPLUG (C.5) |
| ------------------------------------------------------------------------------- |
| M.1: Mandatory IF (TSPC_HID_1_2) supported. |
| C.1: One of these is Mandatory IF (TSPC_HID_9_5) is supported |
| (SDP attribute 0x204=True) |
| C.2: One of these is Mandatory. |
| C.3: Mandatory IF (TSPC_HID_8_1) OR (TSPC_HID_8_2) is selected |
| C.4: Mandatory IF (TSPC_HID_8_2) is supported (for status indicators) |
| C.5: Optional IF (TSPC_HID_9_2) supported, otherwise excluded. |
| ------------------------------------------------------------------------------- |
| |
| |
| Device to Host Transfers |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_10_1 False Hid : Data reports larger than host MTU on |
| Control channel (O) |
| TSPC_HID_10_2 False Hid : Data reports larger than host MTU on |
| Interrupt channel (O) |
| TSPC_HID_10_3 False Hid : Data reports to host (O) |
| TSPC_HID_10_4 False Hid : Boot mode reports to host (C.1) |
| ------------------------------------------------------------------------------- |
| C.1: Mandatory IF (TSPC_HID_8_1) OR (TSPC_HID_8_2) is supported. |
| Optional for other HIDs. |
| ------------------------------------------------------------------------------- |
| |
| |
| Host to Device Transfers |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_11_1 False Hid : Data reports larger than device MTU on |
| Control channel (O) |
| TSPC_HID_11_2 False Hid : Data reports larger than device MTU on |
| Interrupt channel (O) |
| TSPC_HID_11_3 False Hid : Data reports to device (O) |
| TSPC_HID_11_4 False Hid : Boot mode reports to device (C.1) |
| ------------------------------------------------------------------------------- |
| C.1: Mandatory IF (TSPC_HID_8_2) is supported. Optional for other HIDs. |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Control Commands |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_12_1 False Hid : Set_Protocol command (C.1) |
| TSPC_HID_12_2 False Hid : Get_Protocol command (C.1) |
| TSPC_HID_12_3 False Hid : Set_Idle command (C.2) |
| TSPC_HID_12_4 False Hid : Get_Idle command (C.2) |
| TSPC_HID_12_5 False Hid : Set_Report command (C.3) |
| TSPC_HID_12_6 False Hid : Get_Report command (C.4) |
| ------------------------------------------------------------------------------- |
| C.1: Mandatory IF (TSPC_HID_8_1) OR (TSPC_HID_8_2) is supported. |
| Optional for other HIDs. If either Set_Protocol or Get_Protocol |
| supported, both are Mandatory. |
| C.2: Mandatory IF (TSPC_HID_8_2) Keyboard is selected. Optional for other HIDs. |
| C.3: Mandatory IF (TSPC_HID_9_12) or (TSPC_HID_9_14) supported. |
| C.4: Mandatory IF (TSPC_HID_9_13) or (TSPC_HID_9_14) supported |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Link Manager Procedures |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_13_1 False Hid : Host initiated Authentication before |
| connection completed (C.1) |
| TSPC_HID_13_2 False Hid : Host initiated Authentication after |
| connection completed (C.1) |
| TSPC_HID_13_3 False Hid : Initiate pairing before connection |
| completed (X) |
| TSPC_HID_13_4 False Hid : Initiate pairing after connection |
| completed (X) |
| TSPC_HID_13_5 False Hid : Encryption (C.1) |
| TSPC_HID_13_6 False Hid : Initiate encryption (O) |
| TSPC_HID_13_7 False Hid : Accept encryption requests (C.2) |
| TSPC_HID_13_8 False Hid : Role switch (Master/Slave) (C.3) |
| TSPC_HID_13_9 False Hid : Request Master Slave switch (O) |
| TSPC_HID_13_10 False Hid : Accept Master Slave switch requests (C.3) |
| TSPC_HID_13_11 False Hid : Hold mode (O) |
| TSPC_HID_13_12 False Hid : Sniff mode (O) |
| TSPC_HID_13_13 False Hid : Park mode (O) |
| ------------------------------------------------------------------------------- |
| C.1: Mandatory IF (TSPC_HID_8_2) OR (TSPC_HID_8_3) is selected. Optional |
| for other HIDs. |
| C.2: Mandatory IF (TSPC_HID_13_5) supported. |
| C.3: Mandatory IF (TSPC_HID_9_6) is supported. |
| X: Feature should not be used by a HID device, but can be supported in LM. |
| ------------------------------------------------------------------------------- |
| |
| |
| HID Link Control Requirements |
| ------------------------------------------------------------------------------- |
| Parameter Name Selected Description |
| ------------------------------------------------------------------------------- |
| TSPC_HID_14_1 False Hid : Supports inquiry, 79 channel (O) |
| TSPC_HID_14_2 False (*) Hid : Supports inquiry scan, 79 channel (M.1) |
| TSPC_ALL False Enables all test cases when set to true. |
| ------------------------------------------------------------------------------- |
| M.1: Mandatory IF (TSPC_HID_1_2) is supported. |
| ------------------------------------------------------------------------------- |
