| /* |
| * Copyright (c) 2013 Eugene Krasnikov <k.eugene.e@gmail.com> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _HAL_H_ |
| #define _HAL_H_ |
| |
| /*--------------------------------------------------------------------------- |
| API VERSIONING INFORMATION |
| |
| The RIVA API is versioned as MAJOR.MINOR.VERSION.REVISION |
| The MAJOR is incremented for major product/architecture changes |
| (and then MINOR/VERSION/REVISION are zeroed) |
| The MINOR is incremented for minor product/architecture changes |
| (and then VERSION/REVISION are zeroed) |
| The VERSION is incremented if a significant API change occurs |
| (and then REVISION is zeroed) |
| The REVISION is incremented if an insignificant API change occurs |
| or if a new API is added |
| All values are in the range 0..255 (ie they are 8-bit values) |
| ---------------------------------------------------------------------------*/ |
| #define WCN36XX_HAL_VER_MAJOR 1 |
| #define WCN36XX_HAL_VER_MINOR 4 |
| #define WCN36XX_HAL_VER_VERSION 1 |
| #define WCN36XX_HAL_VER_REVISION 2 |
| |
| /* This is to force compiler to use the maximum of an int ( 4 bytes ) */ |
| #define WCN36XX_HAL_MAX_ENUM_SIZE 0x7FFFFFFF |
| #define WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF |
| |
| /* Max no. of transmit categories */ |
| #define STACFG_MAX_TC 8 |
| |
| /* The maximum value of access category */ |
| #define WCN36XX_HAL_MAX_AC 4 |
| |
| #define WCN36XX_HAL_IPV4_ADDR_LEN 4 |
| |
| #define WALN_HAL_STA_INVALID_IDX 0xFF |
| #define WCN36XX_HAL_BSS_INVALID_IDX 0xFF |
| |
| /* Default Beacon template size */ |
| #define BEACON_TEMPLATE_SIZE 0x180 |
| |
| /* Param Change Bitmap sent to HAL */ |
| #define PARAM_BCN_INTERVAL_CHANGED (1 << 0) |
| #define PARAM_SHORT_PREAMBLE_CHANGED (1 << 1) |
| #define PARAM_SHORT_SLOT_TIME_CHANGED (1 << 2) |
| #define PARAM_llACOEXIST_CHANGED (1 << 3) |
| #define PARAM_llBCOEXIST_CHANGED (1 << 4) |
| #define PARAM_llGCOEXIST_CHANGED (1 << 5) |
| #define PARAM_HT20MHZCOEXIST_CHANGED (1<<6) |
| #define PARAM_NON_GF_DEVICES_PRESENT_CHANGED (1<<7) |
| #define PARAM_RIFS_MODE_CHANGED (1<<8) |
| #define PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED (1<<9) |
| #define PARAM_OBSS_MODE_CHANGED (1<<10) |
| #define PARAM_BEACON_UPDATE_MASK \ |
| (PARAM_BCN_INTERVAL_CHANGED | \ |
| PARAM_SHORT_PREAMBLE_CHANGED | \ |
| PARAM_SHORT_SLOT_TIME_CHANGED | \ |
| PARAM_llACOEXIST_CHANGED | \ |
| PARAM_llBCOEXIST_CHANGED | \ |
| PARAM_llGCOEXIST_CHANGED | \ |
| PARAM_HT20MHZCOEXIST_CHANGED | \ |
| PARAM_NON_GF_DEVICES_PRESENT_CHANGED | \ |
| PARAM_RIFS_MODE_CHANGED | \ |
| PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED | \ |
| PARAM_OBSS_MODE_CHANGED) |
| |
| /* dump command response Buffer size */ |
| #define DUMPCMD_RSP_BUFFER 100 |
| |
| /* version string max length (including NULL) */ |
| #define WCN36XX_HAL_VERSION_LENGTH 64 |
| |
| /* message types for messages exchanged between WDI and HAL */ |
| enum wcn36xx_hal_host_msg_type { |
| /* Init/De-Init */ |
| WCN36XX_HAL_START_REQ = 0, |
| WCN36XX_HAL_START_RSP = 1, |
| WCN36XX_HAL_STOP_REQ = 2, |
| WCN36XX_HAL_STOP_RSP = 3, |
| |
| /* Scan */ |
| WCN36XX_HAL_INIT_SCAN_REQ = 4, |
| WCN36XX_HAL_INIT_SCAN_RSP = 5, |
| WCN36XX_HAL_START_SCAN_REQ = 6, |
| WCN36XX_HAL_START_SCAN_RSP = 7, |
| WCN36XX_HAL_END_SCAN_REQ = 8, |
| WCN36XX_HAL_END_SCAN_RSP = 9, |
| WCN36XX_HAL_FINISH_SCAN_REQ = 10, |
| WCN36XX_HAL_FINISH_SCAN_RSP = 11, |
| |
| /* HW STA configuration/deconfiguration */ |
| WCN36XX_HAL_CONFIG_STA_REQ = 12, |
| WCN36XX_HAL_CONFIG_STA_RSP = 13, |
| WCN36XX_HAL_DELETE_STA_REQ = 14, |
| WCN36XX_HAL_DELETE_STA_RSP = 15, |
| WCN36XX_HAL_CONFIG_BSS_REQ = 16, |
| WCN36XX_HAL_CONFIG_BSS_RSP = 17, |
| WCN36XX_HAL_DELETE_BSS_REQ = 18, |
| WCN36XX_HAL_DELETE_BSS_RSP = 19, |
| |
| /* Infra STA asscoiation */ |
| WCN36XX_HAL_JOIN_REQ = 20, |
| WCN36XX_HAL_JOIN_RSP = 21, |
| WCN36XX_HAL_POST_ASSOC_REQ = 22, |
| WCN36XX_HAL_POST_ASSOC_RSP = 23, |
| |
| /* Security */ |
| WCN36XX_HAL_SET_BSSKEY_REQ = 24, |
| WCN36XX_HAL_SET_BSSKEY_RSP = 25, |
| WCN36XX_HAL_SET_STAKEY_REQ = 26, |
| WCN36XX_HAL_SET_STAKEY_RSP = 27, |
| WCN36XX_HAL_RMV_BSSKEY_REQ = 28, |
| WCN36XX_HAL_RMV_BSSKEY_RSP = 29, |
| WCN36XX_HAL_RMV_STAKEY_REQ = 30, |
| WCN36XX_HAL_RMV_STAKEY_RSP = 31, |
| |
| /* Qos Related */ |
| WCN36XX_HAL_ADD_TS_REQ = 32, |
| WCN36XX_HAL_ADD_TS_RSP = 33, |
| WCN36XX_HAL_DEL_TS_REQ = 34, |
| WCN36XX_HAL_DEL_TS_RSP = 35, |
| WCN36XX_HAL_UPD_EDCA_PARAMS_REQ = 36, |
| WCN36XX_HAL_UPD_EDCA_PARAMS_RSP = 37, |
| WCN36XX_HAL_ADD_BA_REQ = 38, |
| WCN36XX_HAL_ADD_BA_RSP = 39, |
| WCN36XX_HAL_DEL_BA_REQ = 40, |
| WCN36XX_HAL_DEL_BA_RSP = 41, |
| |
| WCN36XX_HAL_CH_SWITCH_REQ = 42, |
| WCN36XX_HAL_CH_SWITCH_RSP = 43, |
| WCN36XX_HAL_SET_LINK_ST_REQ = 44, |
| WCN36XX_HAL_SET_LINK_ST_RSP = 45, |
| WCN36XX_HAL_GET_STATS_REQ = 46, |
| WCN36XX_HAL_GET_STATS_RSP = 47, |
| WCN36XX_HAL_UPDATE_CFG_REQ = 48, |
| WCN36XX_HAL_UPDATE_CFG_RSP = 49, |
| |
| WCN36XX_HAL_MISSED_BEACON_IND = 50, |
| WCN36XX_HAL_UNKNOWN_ADDR2_FRAME_RX_IND = 51, |
| WCN36XX_HAL_MIC_FAILURE_IND = 52, |
| WCN36XX_HAL_FATAL_ERROR_IND = 53, |
| WCN36XX_HAL_SET_KEYDONE_MSG = 54, |
| |
| /* NV Interface */ |
| WCN36XX_HAL_DOWNLOAD_NV_REQ = 55, |
| WCN36XX_HAL_DOWNLOAD_NV_RSP = 56, |
| |
| WCN36XX_HAL_ADD_BA_SESSION_REQ = 57, |
| WCN36XX_HAL_ADD_BA_SESSION_RSP = 58, |
| WCN36XX_HAL_TRIGGER_BA_REQ = 59, |
| WCN36XX_HAL_TRIGGER_BA_RSP = 60, |
| WCN36XX_HAL_UPDATE_BEACON_REQ = 61, |
| WCN36XX_HAL_UPDATE_BEACON_RSP = 62, |
| WCN36XX_HAL_SEND_BEACON_REQ = 63, |
| WCN36XX_HAL_SEND_BEACON_RSP = 64, |
| |
| WCN36XX_HAL_SET_BCASTKEY_REQ = 65, |
| WCN36XX_HAL_SET_BCASTKEY_RSP = 66, |
| WCN36XX_HAL_DELETE_STA_CONTEXT_IND = 67, |
| WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ = 68, |
| WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP = 69, |
| |
| /* PTT interface support */ |
| WCN36XX_HAL_PROCESS_PTT_REQ = 70, |
| WCN36XX_HAL_PROCESS_PTT_RSP = 71, |
| |
| /* BTAMP related events */ |
| WCN36XX_HAL_SIGNAL_BTAMP_EVENT_REQ = 72, |
| WCN36XX_HAL_SIGNAL_BTAMP_EVENT_RSP = 73, |
| WCN36XX_HAL_TL_HAL_FLUSH_AC_REQ = 74, |
| WCN36XX_HAL_TL_HAL_FLUSH_AC_RSP = 75, |
| |
| WCN36XX_HAL_ENTER_IMPS_REQ = 76, |
| WCN36XX_HAL_EXIT_IMPS_REQ = 77, |
| WCN36XX_HAL_ENTER_BMPS_REQ = 78, |
| WCN36XX_HAL_EXIT_BMPS_REQ = 79, |
| WCN36XX_HAL_ENTER_UAPSD_REQ = 80, |
| WCN36XX_HAL_EXIT_UAPSD_REQ = 81, |
| WCN36XX_HAL_UPDATE_UAPSD_PARAM_REQ = 82, |
| WCN36XX_HAL_CONFIGURE_RXP_FILTER_REQ = 83, |
| WCN36XX_HAL_ADD_BCN_FILTER_REQ = 84, |
| WCN36XX_HAL_REM_BCN_FILTER_REQ = 85, |
| WCN36XX_HAL_ADD_WOWL_BCAST_PTRN = 86, |
| WCN36XX_HAL_DEL_WOWL_BCAST_PTRN = 87, |
| WCN36XX_HAL_ENTER_WOWL_REQ = 88, |
| WCN36XX_HAL_EXIT_WOWL_REQ = 89, |
| WCN36XX_HAL_HOST_OFFLOAD_REQ = 90, |
| WCN36XX_HAL_SET_RSSI_THRESH_REQ = 91, |
| WCN36XX_HAL_GET_RSSI_REQ = 92, |
| WCN36XX_HAL_SET_UAPSD_AC_PARAMS_REQ = 93, |
| WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_REQ = 94, |
| |
| WCN36XX_HAL_ENTER_IMPS_RSP = 95, |
| WCN36XX_HAL_EXIT_IMPS_RSP = 96, |
| WCN36XX_HAL_ENTER_BMPS_RSP = 97, |
| WCN36XX_HAL_EXIT_BMPS_RSP = 98, |
| WCN36XX_HAL_ENTER_UAPSD_RSP = 99, |
| WCN36XX_HAL_EXIT_UAPSD_RSP = 100, |
| WCN36XX_HAL_SET_UAPSD_AC_PARAMS_RSP = 101, |
| WCN36XX_HAL_UPDATE_UAPSD_PARAM_RSP = 102, |
| WCN36XX_HAL_CONFIGURE_RXP_FILTER_RSP = 103, |
| WCN36XX_HAL_ADD_BCN_FILTER_RSP = 104, |
| WCN36XX_HAL_REM_BCN_FILTER_RSP = 105, |
| WCN36XX_HAL_SET_RSSI_THRESH_RSP = 106, |
| WCN36XX_HAL_HOST_OFFLOAD_RSP = 107, |
| WCN36XX_HAL_ADD_WOWL_BCAST_PTRN_RSP = 108, |
| WCN36XX_HAL_DEL_WOWL_BCAST_PTRN_RSP = 109, |
| WCN36XX_HAL_ENTER_WOWL_RSP = 110, |
| WCN36XX_HAL_EXIT_WOWL_RSP = 111, |
| WCN36XX_HAL_RSSI_NOTIFICATION_IND = 112, |
| WCN36XX_HAL_GET_RSSI_RSP = 113, |
| WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_RSP = 114, |
| |
| /* 11k related events */ |
| WCN36XX_HAL_SET_MAX_TX_POWER_REQ = 115, |
| WCN36XX_HAL_SET_MAX_TX_POWER_RSP = 116, |
| |
| /* 11R related msgs */ |
| WCN36XX_HAL_AGGR_ADD_TS_REQ = 117, |
| WCN36XX_HAL_AGGR_ADD_TS_RSP = 118, |
| |
| /* P2P WLAN_FEATURE_P2P */ |
| WCN36XX_HAL_SET_P2P_GONOA_REQ = 119, |
| WCN36XX_HAL_SET_P2P_GONOA_RSP = 120, |
| |
| /* WLAN Dump commands */ |
| WCN36XX_HAL_DUMP_COMMAND_REQ = 121, |
| WCN36XX_HAL_DUMP_COMMAND_RSP = 122, |
| |
| /* OEM_DATA FEATURE SUPPORT */ |
| WCN36XX_HAL_START_OEM_DATA_REQ = 123, |
| WCN36XX_HAL_START_OEM_DATA_RSP = 124, |
| |
| /* ADD SELF STA REQ and RSP */ |
| WCN36XX_HAL_ADD_STA_SELF_REQ = 125, |
| WCN36XX_HAL_ADD_STA_SELF_RSP = 126, |
| |
| /* DEL SELF STA SUPPORT */ |
| WCN36XX_HAL_DEL_STA_SELF_REQ = 127, |
| WCN36XX_HAL_DEL_STA_SELF_RSP = 128, |
| |
| /* Coex Indication */ |
| WCN36XX_HAL_COEX_IND = 129, |
| |
| /* Tx Complete Indication */ |
| WCN36XX_HAL_OTA_TX_COMPL_IND = 130, |
| |
| /* Host Suspend/resume messages */ |
| WCN36XX_HAL_HOST_SUSPEND_IND = 131, |
| WCN36XX_HAL_HOST_RESUME_REQ = 132, |
| WCN36XX_HAL_HOST_RESUME_RSP = 133, |
| |
| WCN36XX_HAL_SET_TX_POWER_REQ = 134, |
| WCN36XX_HAL_SET_TX_POWER_RSP = 135, |
| WCN36XX_HAL_GET_TX_POWER_REQ = 136, |
| WCN36XX_HAL_GET_TX_POWER_RSP = 137, |
| |
| WCN36XX_HAL_P2P_NOA_ATTR_IND = 138, |
| |
| WCN36XX_HAL_ENABLE_RADAR_DETECT_REQ = 139, |
| WCN36XX_HAL_ENABLE_RADAR_DETECT_RSP = 140, |
| WCN36XX_HAL_GET_TPC_REPORT_REQ = 141, |
| WCN36XX_HAL_GET_TPC_REPORT_RSP = 142, |
| WCN36XX_HAL_RADAR_DETECT_IND = 143, |
| WCN36XX_HAL_RADAR_DETECT_INTR_IND = 144, |
| WCN36XX_HAL_KEEP_ALIVE_REQ = 145, |
| WCN36XX_HAL_KEEP_ALIVE_RSP = 146, |
| |
| /* PNO messages */ |
| WCN36XX_HAL_SET_PREF_NETWORK_REQ = 147, |
| WCN36XX_HAL_SET_PREF_NETWORK_RSP = 148, |
| WCN36XX_HAL_SET_RSSI_FILTER_REQ = 149, |
| WCN36XX_HAL_SET_RSSI_FILTER_RSP = 150, |
| WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ = 151, |
| WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP = 152, |
| WCN36XX_HAL_PREF_NETW_FOUND_IND = 153, |
| |
| WCN36XX_HAL_SET_TX_PER_TRACKING_REQ = 154, |
| WCN36XX_HAL_SET_TX_PER_TRACKING_RSP = 155, |
| WCN36XX_HAL_TX_PER_HIT_IND = 156, |
| |
| WCN36XX_HAL_8023_MULTICAST_LIST_REQ = 157, |
| WCN36XX_HAL_8023_MULTICAST_LIST_RSP = 158, |
| |
| WCN36XX_HAL_SET_PACKET_FILTER_REQ = 159, |
| WCN36XX_HAL_SET_PACKET_FILTER_RSP = 160, |
| WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_REQ = 161, |
| WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_RSP = 162, |
| WCN36XX_HAL_CLEAR_PACKET_FILTER_REQ = 163, |
| WCN36XX_HAL_CLEAR_PACKET_FILTER_RSP = 164, |
| |
| /* |
| * This is temp fix. Should be removed once Host and Riva code is |
| * in sync. |
| */ |
| WCN36XX_HAL_INIT_SCAN_CON_REQ = 165, |
| |
| WCN36XX_HAL_SET_POWER_PARAMS_REQ = 166, |
| WCN36XX_HAL_SET_POWER_PARAMS_RSP = 167, |
| |
| WCN36XX_HAL_TSM_STATS_REQ = 168, |
| WCN36XX_HAL_TSM_STATS_RSP = 169, |
| |
| /* wake reason indication (WOW) */ |
| WCN36XX_HAL_WAKE_REASON_IND = 170, |
| |
| /* GTK offload support */ |
| WCN36XX_HAL_GTK_OFFLOAD_REQ = 171, |
| WCN36XX_HAL_GTK_OFFLOAD_RSP = 172, |
| WCN36XX_HAL_GTK_OFFLOAD_GETINFO_REQ = 173, |
| WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP = 174, |
| |
| WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ = 175, |
| WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP = 176, |
| WCN36XX_HAL_EXCLUDE_UNENCRYPTED_IND = 177, |
| |
| WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ = 178, |
| WCN36XX_HAL_SET_THERMAL_MITIGATION_RSP = 179, |
| |
| WCN36XX_HAL_UPDATE_VHT_OP_MODE_REQ = 182, |
| WCN36XX_HAL_UPDATE_VHT_OP_MODE_RSP = 183, |
| |
| WCN36XX_HAL_P2P_NOA_START_IND = 184, |
| |
| WCN36XX_HAL_GET_ROAM_RSSI_REQ = 185, |
| WCN36XX_HAL_GET_ROAM_RSSI_RSP = 186, |
| |
| WCN36XX_HAL_CLASS_B_STATS_IND = 187, |
| WCN36XX_HAL_DEL_BA_IND = 188, |
| WCN36XX_HAL_DHCP_START_IND = 189, |
| WCN36XX_HAL_DHCP_STOP_IND = 190, |
| |
| WCN36XX_HAL_AVOID_FREQ_RANGE_IND = 233, |
| |
| WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE |
| }; |
| |
| /* Enumeration for Version */ |
| enum wcn36xx_hal_host_msg_version { |
| WCN36XX_HAL_MSG_VERSION0 = 0, |
| WCN36XX_HAL_MSG_VERSION1 = 1, |
| /* define as 2 bytes data */ |
| WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF, |
| WCN36XX_HAL_MSG_VERSION_MAX_FIELD = WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION |
| }; |
| |
| enum driver_type { |
| DRIVER_TYPE_PRODUCTION = 0, |
| DRIVER_TYPE_MFG = 1, |
| DRIVER_TYPE_DVT = 2, |
| DRIVER_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum wcn36xx_hal_stop_type { |
| HAL_STOP_TYPE_SYS_RESET, |
| HAL_STOP_TYPE_SYS_DEEP_SLEEP, |
| HAL_STOP_TYPE_RF_KILL, |
| HAL_STOP_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum wcn36xx_hal_sys_mode { |
| HAL_SYS_MODE_NORMAL, |
| HAL_SYS_MODE_LEARN, |
| HAL_SYS_MODE_SCAN, |
| HAL_SYS_MODE_PROMISC, |
| HAL_SYS_MODE_SUSPEND_LINK, |
| HAL_SYS_MODE_ROAM_SCAN, |
| HAL_SYS_MODE_ROAM_SUSPEND_LINK, |
| HAL_SYS_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum phy_chan_bond_state { |
| /* 20MHz IF bandwidth centered on IF carrier */ |
| PHY_SINGLE_CHANNEL_CENTERED = 0, |
| |
| /* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */ |
| PHY_DOUBLE_CHANNEL_LOW_PRIMARY = 1, |
| |
| /* 40MHz IF bandwidth centered on IF carrier */ |
| PHY_DOUBLE_CHANNEL_CENTERED = 2, |
| |
| /* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */ |
| PHY_DOUBLE_CHANNEL_HIGH_PRIMARY = 3, |
| |
| /* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED = 4, |
| |
| /* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED = 5, |
| |
| /* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED = 6, |
| |
| /* 20/40MHZ offset LOW 40/80MHZ offset LOW */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW = 7, |
| |
| /* 20/40MHZ offset HIGH 40/80MHZ offset LOW */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW = 8, |
| |
| /* 20/40MHZ offset LOW 40/80MHZ offset HIGH */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH = 9, |
| |
| /* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */ |
| PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH = 10, |
| |
| PHY_CHANNEL_BONDING_STATE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* Spatial Multiplexing(SM) Power Save mode */ |
| enum wcn36xx_hal_ht_mimo_state { |
| /* Static SM Power Save mode */ |
| WCN36XX_HAL_HT_MIMO_PS_STATIC = 0, |
| |
| /* Dynamic SM Power Save mode */ |
| WCN36XX_HAL_HT_MIMO_PS_DYNAMIC = 1, |
| |
| /* reserved */ |
| WCN36XX_HAL_HT_MIMO_PS_NA = 2, |
| |
| /* SM Power Save disabled */ |
| WCN36XX_HAL_HT_MIMO_PS_NO_LIMIT = 3, |
| |
| WCN36XX_HAL_HT_MIMO_PS_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* each station added has a rate mode which specifies the sta attributes */ |
| enum sta_rate_mode { |
| STA_TAURUS = 0, |
| STA_TITAN, |
| STA_POLARIS, |
| STA_11b, |
| STA_11bg, |
| STA_11a, |
| STA_11n, |
| STA_11ac, |
| STA_INVALID_RATE_MODE = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* 1,2,5.5,11 */ |
| #define WCN36XX_HAL_NUM_DSSS_RATES 4 |
| |
| /* 6,9,12,18,24,36,48,54 */ |
| #define WCN36XX_HAL_NUM_OFDM_RATES 8 |
| |
| /* 72,96,108 */ |
| #define WCN36XX_HAL_NUM_POLARIS_RATES 3 |
| |
| #define WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET 16 |
| |
| enum wcn36xx_hal_bss_type { |
| WCN36XX_HAL_INFRASTRUCTURE_MODE, |
| |
| /* Added for softAP support */ |
| WCN36XX_HAL_INFRA_AP_MODE, |
| |
| WCN36XX_HAL_IBSS_MODE, |
| |
| /* Added for BT-AMP support */ |
| WCN36XX_HAL_BTAMP_STA_MODE, |
| |
| /* Added for BT-AMP support */ |
| WCN36XX_HAL_BTAMP_AP_MODE, |
| |
| WCN36XX_HAL_AUTO_MODE, |
| |
| WCN36XX_HAL_DONOT_USE_BSS_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum wcn36xx_hal_nw_type { |
| WCN36XX_HAL_11A_NW_TYPE, |
| WCN36XX_HAL_11B_NW_TYPE, |
| WCN36XX_HAL_11G_NW_TYPE, |
| WCN36XX_HAL_11N_NW_TYPE, |
| WCN36XX_HAL_DONOT_USE_NW_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| #define WCN36XX_HAL_MAC_RATESET_EID_MAX 12 |
| |
| enum wcn36xx_hal_ht_operating_mode { |
| /* No Protection */ |
| WCN36XX_HAL_HT_OP_MODE_PURE, |
| |
| /* Overlap Legacy device present, protection is optional */ |
| WCN36XX_HAL_HT_OP_MODE_OVERLAP_LEGACY, |
| |
| /* No legacy device, but 20 MHz HT present */ |
| WCN36XX_HAL_HT_OP_MODE_NO_LEGACY_20MHZ_HT, |
| |
| /* Protection is required */ |
| WCN36XX_HAL_HT_OP_MODE_MIXED, |
| |
| WCN36XX_HAL_HT_OP_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* Encryption type enum used with peer */ |
| enum ani_ed_type { |
| WCN36XX_HAL_ED_NONE, |
| WCN36XX_HAL_ED_WEP40, |
| WCN36XX_HAL_ED_WEP104, |
| WCN36XX_HAL_ED_TKIP, |
| WCN36XX_HAL_ED_CCMP, |
| WCN36XX_HAL_ED_WPI, |
| WCN36XX_HAL_ED_AES_128_CMAC, |
| WCN36XX_HAL_ED_NOT_IMPLEMENTED = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| #define WLAN_MAX_KEY_RSC_LEN 16 |
| #define WLAN_WAPI_KEY_RSC_LEN 16 |
| |
| /* MAX key length when ULA is used */ |
| #define WCN36XX_HAL_MAC_MAX_KEY_LENGTH 32 |
| #define WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS 4 |
| |
| /* |
| * Enum to specify whether key is used for TX only, RX only or both. |
| */ |
| enum ani_key_direction { |
| WCN36XX_HAL_TX_ONLY, |
| WCN36XX_HAL_RX_ONLY, |
| WCN36XX_HAL_TX_RX, |
| WCN36XX_HAL_TX_DEFAULT, |
| WCN36XX_HAL_DONOT_USE_KEY_DIRECTION = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum ani_wep_type { |
| WCN36XX_HAL_WEP_STATIC, |
| WCN36XX_HAL_WEP_DYNAMIC, |
| WCN36XX_HAL_WEP_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum wcn36xx_hal_link_state { |
| |
| WCN36XX_HAL_LINK_IDLE_STATE = 0, |
| WCN36XX_HAL_LINK_PREASSOC_STATE = 1, |
| WCN36XX_HAL_LINK_POSTASSOC_STATE = 2, |
| WCN36XX_HAL_LINK_AP_STATE = 3, |
| WCN36XX_HAL_LINK_IBSS_STATE = 4, |
| |
| /* BT-AMP Case */ |
| WCN36XX_HAL_LINK_BTAMP_PREASSOC_STATE = 5, |
| WCN36XX_HAL_LINK_BTAMP_POSTASSOC_STATE = 6, |
| WCN36XX_HAL_LINK_BTAMP_AP_STATE = 7, |
| WCN36XX_HAL_LINK_BTAMP_STA_STATE = 8, |
| |
| /* Reserved for HAL Internal Use */ |
| WCN36XX_HAL_LINK_LEARN_STATE = 9, |
| WCN36XX_HAL_LINK_SCAN_STATE = 10, |
| WCN36XX_HAL_LINK_FINISH_SCAN_STATE = 11, |
| WCN36XX_HAL_LINK_INIT_CAL_STATE = 12, |
| WCN36XX_HAL_LINK_FINISH_CAL_STATE = 13, |
| WCN36XX_HAL_LINK_LISTEN_STATE = 14, |
| |
| WCN36XX_HAL_LINK_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| enum wcn36xx_hal_stats_mask { |
| HAL_SUMMARY_STATS_INFO = 0x00000001, |
| HAL_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, |
| HAL_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, |
| HAL_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, |
| HAL_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, |
| HAL_PER_STA_STATS_INFO = 0x00000020 |
| }; |
| |
| /* BT-AMP events type */ |
| enum bt_amp_event_type { |
| BTAMP_EVENT_CONNECTION_START, |
| BTAMP_EVENT_CONNECTION_STOP, |
| BTAMP_EVENT_CONNECTION_TERMINATED, |
| |
| /* This and beyond are invalid values */ |
| BTAMP_EVENT_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, |
| }; |
| |
| /* PE Statistics */ |
| enum pe_stats_mask { |
| PE_SUMMARY_STATS_INFO = 0x00000001, |
| PE_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, |
| PE_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, |
| PE_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, |
| PE_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, |
| PE_PER_STA_STATS_INFO = 0x00000020, |
| |
| /* This and beyond are invalid values */ |
| PE_STATS_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* |
| * Configuration Parameter IDs |
| */ |
| #define WCN36XX_HAL_CFG_STA_ID 0 |
| #define WCN36XX_HAL_CFG_CURRENT_TX_ANTENNA 1 |
| #define WCN36XX_HAL_CFG_CURRENT_RX_ANTENNA 2 |
| #define WCN36XX_HAL_CFG_LOW_GAIN_OVERRIDE 3 |
| #define WCN36XX_HAL_CFG_POWER_STATE_PER_CHAIN 4 |
| #define WCN36XX_HAL_CFG_CAL_PERIOD 5 |
| #define WCN36XX_HAL_CFG_CAL_CONTROL 6 |
| #define WCN36XX_HAL_CFG_PROXIMITY 7 |
| #define WCN36XX_HAL_CFG_NETWORK_DENSITY 8 |
| #define WCN36XX_HAL_CFG_MAX_MEDIUM_TIME 9 |
| #define WCN36XX_HAL_CFG_MAX_MPDUS_IN_AMPDU 10 |
| #define WCN36XX_HAL_CFG_RTS_THRESHOLD 11 |
| #define WCN36XX_HAL_CFG_SHORT_RETRY_LIMIT 12 |
| #define WCN36XX_HAL_CFG_LONG_RETRY_LIMIT 13 |
| #define WCN36XX_HAL_CFG_FRAGMENTATION_THRESHOLD 14 |
| #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ZERO 15 |
| #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ONE 16 |
| #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_TWO 17 |
| #define WCN36XX_HAL_CFG_FIXED_RATE 18 |
| #define WCN36XX_HAL_CFG_RETRYRATE_POLICY 19 |
| #define WCN36XX_HAL_CFG_RETRYRATE_SECONDARY 20 |
| #define WCN36XX_HAL_CFG_RETRYRATE_TERTIARY 21 |
| #define WCN36XX_HAL_CFG_FORCE_POLICY_PROTECTION 22 |
| #define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_24GHZ 23 |
| #define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_5GHZ 24 |
| #define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_24GHZ 25 |
| #define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_5GHZ 26 |
| #define WCN36XX_HAL_CFG_MAX_BA_SESSIONS 27 |
| #define WCN36XX_HAL_CFG_PS_DATA_INACTIVITY_TIMEOUT 28 |
| #define WCN36XX_HAL_CFG_PS_ENABLE_BCN_FILTER 29 |
| #define WCN36XX_HAL_CFG_PS_ENABLE_RSSI_MONITOR 30 |
| #define WCN36XX_HAL_CFG_NUM_BEACON_PER_RSSI_AVERAGE 31 |
| #define WCN36XX_HAL_CFG_STATS_PERIOD 32 |
| #define WCN36XX_HAL_CFG_CFP_MAX_DURATION 33 |
| #define WCN36XX_HAL_CFG_FRAME_TRANS_ENABLED 34 |
| #define WCN36XX_HAL_CFG_DTIM_PERIOD 35 |
| #define WCN36XX_HAL_CFG_EDCA_WMM_ACBK 36 |
| #define WCN36XX_HAL_CFG_EDCA_WMM_ACBE 37 |
| #define WCN36XX_HAL_CFG_EDCA_WMM_ACVO 38 |
| #define WCN36XX_HAL_CFG_EDCA_WMM_ACVI 39 |
| #define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH 40 |
| #define WCN36XX_HAL_CFG_MAX_BA_BUFFERS 41 |
| #define WCN36XX_HAL_CFG_RPE_POLLING_THRESHOLD 42 |
| #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG 43 |
| #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG 44 |
| #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG 45 |
| #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG 46 |
| #define WCN36XX_HAL_CFG_NO_OF_ONCHIP_REORDER_SESSIONS 47 |
| #define WCN36XX_HAL_CFG_PS_LISTEN_INTERVAL 48 |
| #define WCN36XX_HAL_CFG_PS_HEART_BEAT_THRESHOLD 49 |
| #define WCN36XX_HAL_CFG_PS_NTH_BEACON_FILTER 50 |
| #define WCN36XX_HAL_CFG_PS_MAX_PS_POLL 51 |
| #define WCN36XX_HAL_CFG_PS_MIN_RSSI_THRESHOLD 52 |
| #define WCN36XX_HAL_CFG_PS_RSSI_FILTER_PERIOD 53 |
| #define WCN36XX_HAL_CFG_PS_BROADCAST_FRAME_FILTER_ENABLE 54 |
| #define WCN36XX_HAL_CFG_PS_IGNORE_DTIM 55 |
| #define WCN36XX_HAL_CFG_PS_ENABLE_BCN_EARLY_TERM 56 |
| #define WCN36XX_HAL_CFG_DYNAMIC_PS_POLL_VALUE 57 |
| #define WCN36XX_HAL_CFG_PS_NULLDATA_AP_RESP_TIMEOUT 58 |
| #define WCN36XX_HAL_CFG_TELE_BCN_WAKEUP_EN 59 |
| #define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI 60 |
| #define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS 61 |
| #define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI 62 |
| #define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI_IDLE_BCNS 63 |
| #define WCN36XX_HAL_CFG_TX_PWR_CTRL_ENABLE 64 |
| #define WCN36XX_HAL_CFG_VALID_RADAR_CHANNEL_LIST 65 |
| #define WCN36XX_HAL_CFG_TX_POWER_24_20 66 |
| #define WCN36XX_HAL_CFG_TX_POWER_24_40 67 |
| #define WCN36XX_HAL_CFG_TX_POWER_50_20 68 |
| #define WCN36XX_HAL_CFG_TX_POWER_50_40 69 |
| #define WCN36XX_HAL_CFG_MCAST_BCAST_FILTER_SETTING 70 |
| #define WCN36XX_HAL_CFG_BCN_EARLY_TERM_WAKEUP_INTERVAL 71 |
| #define WCN36XX_HAL_CFG_MAX_TX_POWER_2_4 72 |
| #define WCN36XX_HAL_CFG_MAX_TX_POWER_5 73 |
| #define WCN36XX_HAL_CFG_INFRA_STA_KEEP_ALIVE_PERIOD 74 |
| #define WCN36XX_HAL_CFG_ENABLE_CLOSE_LOOP 75 |
| #define WCN36XX_HAL_CFG_BTC_EXECUTION_MODE 76 |
| #define WCN36XX_HAL_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK 77 |
| #define WCN36XX_HAL_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS 78 |
| #define WCN36XX_HAL_CFG_PS_TX_INACTIVITY_TIMEOUT 79 |
| #define WCN36XX_HAL_CFG_WCNSS_API_VERSION 80 |
| #define WCN36XX_HAL_CFG_AP_KEEPALIVE_TIMEOUT 81 |
| #define WCN36XX_HAL_CFG_GO_KEEPALIVE_TIMEOUT 82 |
| #define WCN36XX_HAL_CFG_ENABLE_MC_ADDR_LIST 83 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_BT 84 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_BT 85 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_BT 86 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_BT 87 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_WLAN 88 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_WLAN 89 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_WLAN 90 |
| #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_WLAN 91 |
| #define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_BT 92 |
| #define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_WLAN 93 |
| #define WCN36XX_HAL_CFG_BTC_MAX_SCO_BLOCK_PERC 94 |
| #define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_A2DP 95 |
| #define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_SCO 96 |
| #define WCN36XX_HAL_CFG_ENABLE_UNICAST_FILTER 97 |
| #define WCN36XX_HAL_CFG_MAX_ASSOC_LIMIT 98 |
| #define WCN36XX_HAL_CFG_ENABLE_LPWR_IMG_TRANSITION 99 |
| #define WCN36XX_HAL_CFG_ENABLE_MCC_ADAPTIVE_SCHEDULER 100 |
| #define WCN36XX_HAL_CFG_ENABLE_DETECT_PS_SUPPORT 101 |
| #define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102 |
| #define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103 |
| #define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104 |
| #define WCN36XX_HAL_CFG_MAX_PARAMS 105 |
| |
| /* Message definitons - All the messages below need to be packed */ |
| |
| /* Definition for HAL API Version. */ |
| struct wcnss_wlan_version { |
| u8 revision; |
| u8 version; |
| u8 minor; |
| u8 major; |
| } __packed; |
| |
| /* Definition for Encryption Keys */ |
| struct wcn36xx_hal_keys { |
| u8 id; |
| |
| /* 0 for multicast */ |
| u8 unicast; |
| |
| enum ani_key_direction direction; |
| |
| /* Usage is unknown */ |
| u8 rsc[WLAN_MAX_KEY_RSC_LEN]; |
| |
| /* =1 for authenticator,=0 for supplicant */ |
| u8 pae_role; |
| |
| u16 length; |
| u8 key[WCN36XX_HAL_MAC_MAX_KEY_LENGTH]; |
| } __packed; |
| |
| /* |
| * set_sta_key_params Moving here since it is shared by |
| * configbss/setstakey msgs |
| */ |
| struct wcn36xx_hal_set_sta_key_params { |
| /* STA Index */ |
| u16 sta_index; |
| |
| /* Encryption Type used with peer */ |
| enum ani_ed_type enc_type; |
| |
| /* STATIC/DYNAMIC - valid only for WEP */ |
| enum ani_wep_type wep_type; |
| |
| /* Default WEP key, valid only for static WEP, must between 0 and 3. */ |
| u8 def_wep_idx; |
| |
| /* valid only for non-static WEP encyrptions */ |
| struct wcn36xx_hal_keys key[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; |
| |
| /* |
| * Control for Replay Count, 1= Single TID based replay count on Tx |
| * 0 = Per TID based replay count on TX |
| */ |
| u8 single_tid_rc; |
| |
| } __packed; |
| |
| /* 4-byte control message header used by HAL*/ |
| struct wcn36xx_hal_msg_header { |
| enum wcn36xx_hal_host_msg_type msg_type:16; |
| enum wcn36xx_hal_host_msg_version msg_version:16; |
| u32 len; |
| } __packed; |
| |
| /* Config format required by HAL for each CFG item*/ |
| struct wcn36xx_hal_cfg { |
| /* Cfg Id. The Id required by HAL is exported by HAL |
| * in shared header file between UMAC and HAL.*/ |
| u16 id; |
| |
| /* Length of the Cfg. This parameter is used to go to next cfg |
| * in the TLV format.*/ |
| u16 len; |
| |
| /* Padding bytes for unaligned address's */ |
| u16 pad_bytes; |
| |
| /* Reserve bytes for making cfgVal to align address */ |
| u16 reserve; |
| |
| /* Following the uCfgLen field there should be a 'uCfgLen' bytes |
| * containing the uCfgValue ; u8 uCfgValue[uCfgLen] */ |
| } __packed; |
| |
| struct wcn36xx_hal_mac_start_parameters { |
| /* Drive Type - Production or FTM etc */ |
| enum driver_type type; |
| |
| /* Length of the config buffer */ |
| u32 len; |
| |
| /* Following this there is a TLV formatted buffer of length |
| * "len" bytes containing all config values. |
| * The TLV is expected to be formatted like this: |
| * 0 15 31 31+CFG_LEN-1 length-1 |
| * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| |
| */ |
| } __packed; |
| |
| struct wcn36xx_hal_mac_start_req_msg { |
| /* config buffer must start in TLV format just here */ |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_mac_start_parameters params; |
| } __packed; |
| |
| struct wcn36xx_hal_mac_start_rsp_params { |
| /* success or failure */ |
| u16 status; |
| |
| /* Max number of STA supported by the device */ |
| u8 stations; |
| |
| /* Max number of BSS supported by the device */ |
| u8 bssids; |
| |
| /* API Version */ |
| struct wcnss_wlan_version version; |
| |
| /* CRM build information */ |
| u8 crm_version[WCN36XX_HAL_VERSION_LENGTH]; |
| |
| /* hardware/chipset/misc version information */ |
| u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH]; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_mac_start_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_mac_start_rsp_params start_rsp_params; |
| } __packed; |
| |
| struct wcn36xx_hal_mac_stop_req_params { |
| /* The reason for which the device is being stopped */ |
| enum wcn36xx_hal_stop_type reason; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_mac_stop_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_mac_stop_req_params stop_req_params; |
| } __packed; |
| |
| struct wcn36xx_hal_mac_stop_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| struct wcn36xx_hal_update_cfg_req_msg { |
| /* |
| * Note: The length specified in tHalUpdateCfgReqMsg messages should be |
| * header.msgLen = sizeof(tHalUpdateCfgReqMsg) + uConfigBufferLen |
| */ |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Length of the config buffer. Allows UMAC to update multiple CFGs */ |
| u32 len; |
| |
| /* |
| * Following this there is a TLV formatted buffer of length |
| * "uConfigBufferLen" bytes containing all config values. |
| * The TLV is expected to be formatted like this: |
| * 0 15 31 31+CFG_LEN-1 length-1 |
| * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| |
| */ |
| |
| } __packed; |
| |
| struct wcn36xx_hal_update_cfg_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| } __packed; |
| |
| /* Frame control field format (2 bytes) */ |
| struct wcn36xx_hal_mac_frame_ctl { |
| |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| |
| u8 subType:4; |
| u8 type:2; |
| u8 protVer:2; |
| |
| u8 order:1; |
| u8 wep:1; |
| u8 moreData:1; |
| u8 powerMgmt:1; |
| u8 retry:1; |
| u8 moreFrag:1; |
| u8 fromDS:1; |
| u8 toDS:1; |
| |
| #else |
| |
| u8 protVer:2; |
| u8 type:2; |
| u8 subType:4; |
| |
| u8 toDS:1; |
| u8 fromDS:1; |
| u8 moreFrag:1; |
| u8 retry:1; |
| u8 powerMgmt:1; |
| u8 moreData:1; |
| u8 wep:1; |
| u8 order:1; |
| |
| #endif |
| |
| }; |
| |
| /* Sequence control field */ |
| struct wcn36xx_hal_mac_seq_ctl { |
| u8 fragNum:4; |
| u8 seqNumLo:4; |
| u8 seqNumHi:8; |
| }; |
| |
| /* Management header format */ |
| struct wcn36xx_hal_mac_mgmt_hdr { |
| struct wcn36xx_hal_mac_frame_ctl fc; |
| u8 durationLo; |
| u8 durationHi; |
| u8 da[6]; |
| u8 sa[6]; |
| u8 bssId[6]; |
| struct wcn36xx_hal_mac_seq_ctl seqControl; |
| }; |
| |
| /* FIXME: pronto v1 apparently has 4 */ |
| #define WCN36XX_HAL_NUM_BSSID 2 |
| |
| /* Scan Entry to hold active BSS idx's */ |
| struct wcn36xx_hal_scan_entry { |
| u8 bss_index[WCN36XX_HAL_NUM_BSSID]; |
| u8 active_bss_count; |
| }; |
| |
| struct wcn36xx_hal_init_scan_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* LEARN - AP Role |
| SCAN - STA Role */ |
| enum wcn36xx_hal_sys_mode mode; |
| |
| /* BSSID of the BSS */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Whether BSS needs to be notified */ |
| u8 notify; |
| |
| /* Kind of frame to be used for notifying the BSS (Data Null, QoS |
| * Null, or CTS to Self). Must always be a valid frame type. */ |
| u8 frame_type; |
| |
| /* UMAC has the option of passing the MAC frame to be used for |
| * notifying the BSS. If non-zero, HAL will use the MAC frame |
| * buffer pointed to by macMgmtHdr. If zero, HAL will generate the |
| * appropriate MAC frame based on frameType. */ |
| u8 frame_len; |
| |
| /* Following the framelength there is a MAC frame buffer if |
| * frameLength is non-zero. */ |
| struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; |
| |
| /* Entry to hold number of active BSS idx's */ |
| struct wcn36xx_hal_scan_entry scan_entry; |
| }; |
| |
| struct wcn36xx_hal_init_scan_con_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* LEARN - AP Role |
| SCAN - STA Role */ |
| enum wcn36xx_hal_sys_mode mode; |
| |
| /* BSSID of the BSS */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Whether BSS needs to be notified */ |
| u8 notify; |
| |
| /* Kind of frame to be used for notifying the BSS (Data Null, QoS |
| * Null, or CTS to Self). Must always be a valid frame type. */ |
| u8 frame_type; |
| |
| /* UMAC has the option of passing the MAC frame to be used for |
| * notifying the BSS. If non-zero, HAL will use the MAC frame |
| * buffer pointed to by macMgmtHdr. If zero, HAL will generate the |
| * appropriate MAC frame based on frameType. */ |
| u8 frame_length; |
| |
| /* Following the framelength there is a MAC frame buffer if |
| * frameLength is non-zero. */ |
| struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; |
| |
| /* Entry to hold number of active BSS idx's */ |
| struct wcn36xx_hal_scan_entry scan_entry; |
| |
| /* Single NoA usage in Scanning */ |
| u8 use_noa; |
| |
| /* Indicates the scan duration (in ms) */ |
| u16 scan_duration; |
| |
| }; |
| |
| struct wcn36xx_hal_init_scan_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_start_scan_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Indicates the channel to scan */ |
| u8 scan_channel; |
| } __packed; |
| |
| struct wcn36xx_hal_start_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u32 start_tsf[2]; |
| u8 tx_mgmt_power; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_end_scan_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Indicates the channel to stop scanning. Not used really. But |
| * retained for symmetry with "start Scan" message. It can also |
| * help in error check if needed. */ |
| u8 scan_channel; |
| } __packed; |
| |
| struct wcn36xx_hal_end_scan_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| struct wcn36xx_hal_finish_scan_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Identifies the operational state of the AP/STA |
| * LEARN - AP Role SCAN - STA Role */ |
| enum wcn36xx_hal_sys_mode mode; |
| |
| /* Operating channel to tune to. */ |
| u8 oper_channel; |
| |
| /* Channel Bonding state If 20/40 MHz is operational, this will |
| * indicate the 40 MHz extension channel in combination with the |
| * control channel */ |
| enum phy_chan_bond_state cb_state; |
| |
| /* BSSID of the BSS */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Whether BSS needs to be notified */ |
| u8 notify; |
| |
| /* Kind of frame to be used for notifying the BSS (Data Null, QoS |
| * Null, or CTS to Self). Must always be a valid frame type. */ |
| u8 frame_type; |
| |
| /* UMAC has the option of passing the MAC frame to be used for |
| * notifying the BSS. If non-zero, HAL will use the MAC frame |
| * buffer pointed to by macMgmtHdr. If zero, HAL will generate the |
| * appropriate MAC frame based on frameType. */ |
| u8 frame_length; |
| |
| /* Following the framelength there is a MAC frame buffer if |
| * frameLength is non-zero. */ |
| struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; |
| |
| /* Entry to hold number of active BSS idx's */ |
| struct wcn36xx_hal_scan_entry scan_entry; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_finish_scan_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| } __packed; |
| |
| enum wcn36xx_hal_rate_index { |
| HW_RATE_INDEX_1MBPS = 0x82, |
| HW_RATE_INDEX_2MBPS = 0x84, |
| HW_RATE_INDEX_5_5MBPS = 0x8B, |
| HW_RATE_INDEX_6MBPS = 0x0C, |
| HW_RATE_INDEX_9MBPS = 0x12, |
| HW_RATE_INDEX_11MBPS = 0x96, |
| HW_RATE_INDEX_12MBPS = 0x18, |
| HW_RATE_INDEX_18MBPS = 0x24, |
| HW_RATE_INDEX_24MBPS = 0x30, |
| HW_RATE_INDEX_36MBPS = 0x48, |
| HW_RATE_INDEX_48MBPS = 0x60, |
| HW_RATE_INDEX_54MBPS = 0x6C |
| }; |
| |
| struct wcn36xx_hal_supported_rates { |
| /* |
| * For Self STA Entry: this represents Self Mode. |
| * For Peer Stations, this represents the mode of the peer. |
| * On Station: |
| * |
| * --this mode is updated when PE adds the Self Entry. |
| * |
| * -- OR when PE sends 'ADD_BSS' message and station context in BSS |
| * is used to indicate the mode of the AP. |
| * |
| * ON AP: |
| * |
| * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry |
| * for that BSS is used to indicate the self mode of the AP. |
| * |
| * -- OR when a station is associated, PE sends 'ADD_STA' message |
| * with this mode updated. |
| */ |
| |
| enum sta_rate_mode op_rate_mode; |
| |
| /* 11b, 11a and aniLegacyRates are IE rates which gives rate in |
| * unit of 500Kbps */ |
| u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; |
| u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; |
| u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; |
| u16 reserved; |
| |
| /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be |
| * supported) First 26 bits are reserved for those Titan rates and |
| * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are |
| * reserved. */ |
| /* Titan and Taurus Rates */ |
| u32 enhanced_rate_bitmap; |
| |
| /* |
| * 0-76 bits used, remaining reserved |
| * bits 0-15 and 32 should be set. |
| */ |
| u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; |
| |
| /* |
| * RX Highest Supported Data Rate defines the highest data |
| * rate that the STA is able to receive, in unites of 1Mbps. |
| * This value is derived from "Supported MCS Set field" inside |
| * the HT capability element. |
| */ |
| u16 rx_highest_data_rate; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_config_sta_params { |
| /* BSSID of STA */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* ASSOC ID, as assigned by UMAC */ |
| u16 aid; |
| |
| /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ |
| u8 type; |
| |
| /* Short Preamble Supported. */ |
| u8 short_preamble_supported; |
| |
| /* MAC Address of STA */ |
| u8 mac[ETH_ALEN]; |
| |
| /* Listen interval of the STA */ |
| u16 listen_interval; |
| |
| /* Support for 11e/WMM */ |
| u8 wmm_enabled; |
| |
| /* 11n HT capable STA */ |
| u8 ht_capable; |
| |
| /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ |
| u8 tx_channel_width_set; |
| |
| /* RIFS mode 0 - NA, 1 - Allowed */ |
| u8 rifs_mode; |
| |
| /* L-SIG TXOP Protection mechanism |
| 0 - No Support, 1 - Supported |
| SG - there is global field */ |
| u8 lsig_txop_protection; |
| |
| /* Max Ampdu Size supported by STA. TPE programming. |
| 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ |
| u8 max_ampdu_size; |
| |
| /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ |
| u8 max_ampdu_density; |
| |
| /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ |
| u8 max_amsdu_size; |
| |
| /* Short GI support for 40Mhz packets */ |
| u8 sgi_40mhz; |
| |
| /* Short GI support for 20Mhz packets */ |
| u8 sgi_20Mhz; |
| |
| /* TODO move this parameter to the end for 3680 */ |
| /* These rates are the intersection of peer and self capabilities. */ |
| struct wcn36xx_hal_supported_rates supported_rates; |
| |
| /* Robust Management Frame (RMF) enabled/disabled */ |
| u8 rmf; |
| |
| /* The unicast encryption type in the association */ |
| u32 encrypt_type; |
| |
| /* HAL should update the existing STA entry, if this flag is set. UMAC |
| will set this flag in case of RE-ASSOC, where we want to reuse the |
| old STA ID. 0 = Add, 1 = Update */ |
| u8 action; |
| |
| /* U-APSD Flags: 1b per AC. Encoded as follows: |
| b7 b6 b5 b4 b3 b2 b1 b0 = |
| X X X X BE BK VI VO */ |
| u8 uapsd; |
| |
| /* Max SP Length */ |
| u8 max_sp_len; |
| |
| /* 11n Green Field preamble support |
| 0 - Not supported, 1 - Supported */ |
| u8 green_field_capable; |
| |
| /* MIMO Power Save mode */ |
| enum wcn36xx_hal_ht_mimo_state mimo_ps; |
| |
| /* Delayed BA Support */ |
| u8 delayed_ba_support; |
| |
| /* Max AMPDU duration in 32us */ |
| u8 max_ampdu_duration; |
| |
| /* HT STA should set it to 1 if it is enabled in BSS. HT STA should |
| * set it to 0 if AP does not support it. This indication is sent |
| * to HAL and HAL uses this flag to pickup up appropriate 40Mhz |
| * rates. */ |
| u8 dsss_cck_mode_40mhz; |
| |
| /* Valid STA Idx when action=Update. Set to 0xFF when invalid! |
| * Retained for backward compalibity with existing HAL code */ |
| u8 sta_index; |
| |
| /* BSSID of BSS to which station is associated. Set to 0xFF when |
| * invalid. Retained for backward compalibity with existing HAL |
| * code */ |
| u8 bssid_index; |
| |
| u8 p2p; |
| |
| /* TODO add this parameter for 3680. */ |
| /* Reserved to align next field on a dword boundary */ |
| /* u8 reserved; */ |
| } __packed; |
| |
| struct wcn36xx_hal_config_sta_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_config_sta_params sta_params; |
| } __packed; |
| |
| struct wcn36xx_hal_config_sta_params_v1 { |
| /* BSSID of STA */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* ASSOC ID, as assigned by UMAC */ |
| u16 aid; |
| |
| /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ |
| u8 type; |
| |
| /* Short Preamble Supported. */ |
| u8 short_preamble_supported; |
| |
| /* MAC Address of STA */ |
| u8 mac[ETH_ALEN]; |
| |
| /* Listen interval of the STA */ |
| u16 listen_interval; |
| |
| /* Support for 11e/WMM */ |
| u8 wmm_enabled; |
| |
| /* 11n HT capable STA */ |
| u8 ht_capable; |
| |
| /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ |
| u8 tx_channel_width_set; |
| |
| /* RIFS mode 0 - NA, 1 - Allowed */ |
| u8 rifs_mode; |
| |
| /* L-SIG TXOP Protection mechanism |
| 0 - No Support, 1 - Supported |
| SG - there is global field */ |
| u8 lsig_txop_protection; |
| |
| /* Max Ampdu Size supported by STA. TPE programming. |
| 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ |
| u8 max_ampdu_size; |
| |
| /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ |
| u8 max_ampdu_density; |
| |
| /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ |
| u8 max_amsdu_size; |
| |
| /* Short GI support for 40Mhz packets */ |
| u8 sgi_40mhz; |
| |
| /* Short GI support for 20Mhz packets */ |
| u8 sgi_20Mhz; |
| |
| /* Robust Management Frame (RMF) enabled/disabled */ |
| u8 rmf; |
| |
| /* The unicast encryption type in the association */ |
| u32 encrypt_type; |
| |
| /* HAL should update the existing STA entry, if this flag is set. UMAC |
| will set this flag in case of RE-ASSOC, where we want to reuse the |
| old STA ID. 0 = Add, 1 = Update */ |
| u8 action; |
| |
| /* U-APSD Flags: 1b per AC. Encoded as follows: |
| b7 b6 b5 b4 b3 b2 b1 b0 = |
| X X X X BE BK VI VO */ |
| u8 uapsd; |
| |
| /* Max SP Length */ |
| u8 max_sp_len; |
| |
| /* 11n Green Field preamble support |
| 0 - Not supported, 1 - Supported */ |
| u8 green_field_capable; |
| |
| /* MIMO Power Save mode */ |
| enum wcn36xx_hal_ht_mimo_state mimo_ps; |
| |
| /* Delayed BA Support */ |
| u8 delayed_ba_support; |
| |
| /* Max AMPDU duration in 32us */ |
| u8 max_ampdu_duration; |
| |
| /* HT STA should set it to 1 if it is enabled in BSS. HT STA should |
| * set it to 0 if AP does not support it. This indication is sent |
| * to HAL and HAL uses this flag to pickup up appropriate 40Mhz |
| * rates. */ |
| u8 dsss_cck_mode_40mhz; |
| |
| /* Valid STA Idx when action=Update. Set to 0xFF when invalid! |
| * Retained for backward compalibity with existing HAL code */ |
| u8 sta_index; |
| |
| /* BSSID of BSS to which station is associated. Set to 0xFF when |
| * invalid. Retained for backward compalibity with existing HAL |
| * code */ |
| u8 bssid_index; |
| |
| u8 p2p; |
| |
| /* Reserved to align next field on a dword boundary */ |
| u8 reserved; |
| |
| /* These rates are the intersection of peer and self capabilities. */ |
| struct wcn36xx_hal_supported_rates supported_rates; |
| } __packed; |
| |
| struct wcn36xx_hal_config_sta_req_msg_v1 { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_config_sta_params_v1 sta_params; |
| } __packed; |
| |
| struct config_sta_rsp_params { |
| /* success or failure */ |
| u32 status; |
| |
| /* Station index; valid only when 'status' field value SUCCESS */ |
| u8 sta_index; |
| |
| /* BSSID Index of BSS to which the station is associated */ |
| u8 bssid_index; |
| |
| /* DPU Index for PTK */ |
| u8 dpu_index; |
| |
| /* DPU Index for GTK */ |
| u8 bcast_dpu_index; |
| |
| /* DPU Index for IGTK */ |
| u8 bcast_mgmt_dpu_idx; |
| |
| /* PTK DPU signature */ |
| u8 uc_ucast_sig; |
| |
| /* GTK DPU isignature */ |
| u8 uc_bcast_sig; |
| |
| /* IGTK DPU signature */ |
| u8 uc_mgmt_sig; |
| |
| u8 p2p; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_config_sta_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| struct config_sta_rsp_params params; |
| } __packed; |
| |
| /* Delete STA Request message */ |
| struct wcn36xx_hal_delete_sta_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Index of STA to delete */ |
| u8 sta_index; |
| |
| } __packed; |
| |
| /* Delete STA Response message */ |
| struct wcn36xx_hal_delete_sta_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* Index of STA deleted */ |
| u8 sta_id; |
| } __packed; |
| |
| /* 12 Bytes long because this structure can be used to represent rate and |
| * extended rate set IEs. The parser assume this to be at least 12 */ |
| struct wcn36xx_hal_rate_set { |
| u8 num_rates; |
| u8 rate[WCN36XX_HAL_MAC_RATESET_EID_MAX]; |
| } __packed; |
| |
| /* access category record */ |
| struct wcn36xx_hal_aci_aifsn { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| u8 rsvd:1; |
| u8 aci:2; |
| u8 acm:1; |
| u8 aifsn:4; |
| #else |
| u8 aifsn:4; |
| u8 acm:1; |
| u8 aci:2; |
| u8 rsvd:1; |
| #endif |
| } __packed; |
| |
| /* contention window size */ |
| struct wcn36xx_hal_mac_cw { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| u8 max:4; |
| u8 min:4; |
| #else |
| u8 min:4; |
| u8 max:4; |
| #endif |
| } __packed; |
| |
| struct wcn36xx_hal_edca_param_record { |
| struct wcn36xx_hal_aci_aifsn aci; |
| struct wcn36xx_hal_mac_cw cw; |
| u16 txop_limit; |
| } __packed; |
| |
| struct wcn36xx_hal_mac_ssid { |
| u8 length; |
| u8 ssid[32]; |
| } __packed; |
| |
| /* Concurrency role. These are generic IDs that identify the various roles |
| * in the software system. */ |
| enum wcn36xx_hal_con_mode { |
| WCN36XX_HAL_STA_MODE = 0, |
| |
| /* to support softAp mode . This is misleading. |
| It means AP MODE only. */ |
| WCN36XX_HAL_STA_SAP_MODE = 1, |
| |
| WCN36XX_HAL_P2P_CLIENT_MODE, |
| WCN36XX_HAL_P2P_GO_MODE, |
| WCN36XX_HAL_MONITOR_MODE, |
| }; |
| |
| /* This is a bit pattern to be set for each mode |
| * bit 0 - sta mode |
| * bit 1 - ap mode |
| * bit 2 - p2p client mode |
| * bit 3 - p2p go mode */ |
| enum wcn36xx_hal_concurrency_mode { |
| HAL_STA = 1, |
| HAL_SAP = 2, |
| |
| /* to support sta, softAp mode . This means STA+AP mode */ |
| HAL_STA_SAP = 3, |
| |
| HAL_P2P_CLIENT = 4, |
| HAL_P2P_GO = 8, |
| HAL_MAX_CONCURRENCY_PERSONA = 4 |
| }; |
| |
| struct wcn36xx_hal_config_bss_params { |
| /* BSSID */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Self Mac Address */ |
| u8 self_mac_addr[ETH_ALEN]; |
| |
| /* BSS type */ |
| enum wcn36xx_hal_bss_type bss_type; |
| |
| /* Operational Mode: AP =0, STA = 1 */ |
| u8 oper_mode; |
| |
| /* Network Type */ |
| enum wcn36xx_hal_nw_type nw_type; |
| |
| /* Used to classify PURE_11G/11G_MIXED to program MTU */ |
| u8 short_slot_time_supported; |
| |
| /* Co-exist with 11a STA */ |
| u8 lla_coexist; |
| |
| /* Co-exist with 11b STA */ |
| u8 llb_coexist; |
| |
| /* Co-exist with 11g STA */ |
| u8 llg_coexist; |
| |
| /* Coexistence with 11n STA */ |
| u8 ht20_coexist; |
| |
| /* Non GF coexist flag */ |
| u8 lln_non_gf_coexist; |
| |
| /* TXOP protection support */ |
| u8 lsig_tx_op_protection_full_support; |
| |
| /* RIFS mode */ |
| u8 rifs_mode; |
| |
| /* Beacon Interval in TU */ |
| u16 beacon_interval; |
| |
| /* DTIM period */ |
| u8 dtim_period; |
| |
| /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ |
| u8 tx_channel_width_set; |
| |
| /* Operating channel */ |
| u8 oper_channel; |
| |
| /* Extension channel for channel bonding */ |
| u8 ext_channel; |
| |
| /* Reserved to align next field on a dword boundary */ |
| u8 reserved; |
| |
| /* TODO move sta to the end for 3680 */ |
| /* Context of the station being added in HW |
| * Add a STA entry for "itself" - |
| * |
| * On AP - Add the AP itself in an "STA context" |
| * |
| * On STA - Add the AP to which this STA is joining in an |
| * "STA context" |
| */ |
| struct wcn36xx_hal_config_sta_params sta; |
| /* SSID of the BSS */ |
| struct wcn36xx_hal_mac_ssid ssid; |
| |
| /* HAL should update the existing BSS entry, if this flag is set. |
| * UMAC will set this flag in case of reassoc, where we want to |
| * resue the the old BSSID and still return success 0 = Add, 1 = |
| * Update */ |
| u8 action; |
| |
| /* MAC Rate Set */ |
| struct wcn36xx_hal_rate_set rateset; |
| |
| /* Enable/Disable HT capabilities of the BSS */ |
| u8 ht; |
| |
| /* Enable/Disable OBSS protection */ |
| u8 obss_prot_enabled; |
| |
| /* RMF enabled/disabled */ |
| u8 rmf; |
| |
| /* HT Operating Mode operating mode of the 802.11n STA */ |
| enum wcn36xx_hal_ht_operating_mode ht_oper_mode; |
| |
| /* Dual CTS Protection: 0 - Unused, 1 - Used */ |
| u8 dual_cts_protection; |
| |
| /* Probe Response Max retries */ |
| u8 max_probe_resp_retry_limit; |
| |
| /* To Enable Hidden ssid */ |
| u8 hidden_ssid; |
| |
| /* To Enable Disable FW Proxy Probe Resp */ |
| u8 proxy_probe_resp; |
| |
| /* Boolean to indicate if EDCA params are valid. UMAC might not |
| * have valid EDCA params or might not desire to apply EDCA params |
| * during config BSS. 0 implies Not Valid ; Non-Zero implies |
| * valid */ |
| u8 edca_params_valid; |
| |
| /* EDCA Parameters for Best Effort Access Category */ |
| struct wcn36xx_hal_edca_param_record acbe; |
| |
| /* EDCA Parameters forBackground Access Category */ |
| struct wcn36xx_hal_edca_param_record acbk; |
| |
| /* EDCA Parameters for Video Access Category */ |
| struct wcn36xx_hal_edca_param_record acvi; |
| |
| /* EDCA Parameters for Voice Access Category */ |
| struct wcn36xx_hal_edca_param_record acvo; |
| |
| /* Ext Bss Config Msg if set */ |
| u8 ext_set_sta_key_param_valid; |
| |
| /* SetStaKeyParams for ext bss msg */ |
| struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; |
| |
| /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum |
| * wcn36xx_hal_con_mode */ |
| u8 wcn36xx_hal_persona; |
| |
| u8 spectrum_mgt_enable; |
| |
| /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ |
| s8 tx_mgmt_power; |
| |
| /* maxTxPower has max power to be used after applying the power |
| * constraint if any */ |
| s8 max_tx_power; |
| } __packed; |
| |
| struct wcn36xx_hal_config_bss_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_config_bss_params bss_params; |
| } __packed; |
| |
| struct wcn36xx_hal_config_bss_params_v1 { |
| /* BSSID */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Self Mac Address */ |
| u8 self_mac_addr[ETH_ALEN]; |
| |
| /* BSS type */ |
| enum wcn36xx_hal_bss_type bss_type; |
| |
| /* Operational Mode: AP =0, STA = 1 */ |
| u8 oper_mode; |
| |
| /* Network Type */ |
| enum wcn36xx_hal_nw_type nw_type; |
| |
| /* Used to classify PURE_11G/11G_MIXED to program MTU */ |
| u8 short_slot_time_supported; |
| |
| /* Co-exist with 11a STA */ |
| u8 lla_coexist; |
| |
| /* Co-exist with 11b STA */ |
| u8 llb_coexist; |
| |
| /* Co-exist with 11g STA */ |
| u8 llg_coexist; |
| |
| /* Coexistence with 11n STA */ |
| u8 ht20_coexist; |
| |
| /* Non GF coexist flag */ |
| u8 lln_non_gf_coexist; |
| |
| /* TXOP protection support */ |
| u8 lsig_tx_op_protection_full_support; |
| |
| /* RIFS mode */ |
| u8 rifs_mode; |
| |
| /* Beacon Interval in TU */ |
| u16 beacon_interval; |
| |
| /* DTIM period */ |
| u8 dtim_period; |
| |
| /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ |
| u8 tx_channel_width_set; |
| |
| /* Operating channel */ |
| u8 oper_channel; |
| |
| /* Extension channel for channel bonding */ |
| u8 ext_channel; |
| |
| /* Reserved to align next field on a dword boundary */ |
| u8 reserved; |
| |
| /* SSID of the BSS */ |
| struct wcn36xx_hal_mac_ssid ssid; |
| |
| /* HAL should update the existing BSS entry, if this flag is set. |
| * UMAC will set this flag in case of reassoc, where we want to |
| * resue the the old BSSID and still return success 0 = Add, 1 = |
| * Update */ |
| u8 action; |
| |
| /* MAC Rate Set */ |
| struct wcn36xx_hal_rate_set rateset; |
| |
| /* Enable/Disable HT capabilities of the BSS */ |
| u8 ht; |
| |
| /* Enable/Disable OBSS protection */ |
| u8 obss_prot_enabled; |
| |
| /* RMF enabled/disabled */ |
| u8 rmf; |
| |
| /* HT Operating Mode operating mode of the 802.11n STA */ |
| enum wcn36xx_hal_ht_operating_mode ht_oper_mode; |
| |
| /* Dual CTS Protection: 0 - Unused, 1 - Used */ |
| u8 dual_cts_protection; |
| |
| /* Probe Response Max retries */ |
| u8 max_probe_resp_retry_limit; |
| |
| /* To Enable Hidden ssid */ |
| u8 hidden_ssid; |
| |
| /* To Enable Disable FW Proxy Probe Resp */ |
| u8 proxy_probe_resp; |
| |
| /* Boolean to indicate if EDCA params are valid. UMAC might not |
| * have valid EDCA params or might not desire to apply EDCA params |
| * during config BSS. 0 implies Not Valid ; Non-Zero implies |
| * valid */ |
| u8 edca_params_valid; |
| |
| /* EDCA Parameters for Best Effort Access Category */ |
| struct wcn36xx_hal_edca_param_record acbe; |
| |
| /* EDCA Parameters forBackground Access Category */ |
| struct wcn36xx_hal_edca_param_record acbk; |
| |
| /* EDCA Parameters for Video Access Category */ |
| struct wcn36xx_hal_edca_param_record acvi; |
| |
| /* EDCA Parameters for Voice Access Category */ |
| struct wcn36xx_hal_edca_param_record acvo; |
| |
| /* Ext Bss Config Msg if set */ |
| u8 ext_set_sta_key_param_valid; |
| |
| /* SetStaKeyParams for ext bss msg */ |
| struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; |
| |
| /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum |
| * wcn36xx_hal_con_mode */ |
| u8 wcn36xx_hal_persona; |
| |
| u8 spectrum_mgt_enable; |
| |
| /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ |
| s8 tx_mgmt_power; |
| |
| /* maxTxPower has max power to be used after applying the power |
| * constraint if any */ |
| s8 max_tx_power; |
| |
| /* Context of the station being added in HW |
| * Add a STA entry for "itself" - |
| * |
| * On AP - Add the AP itself in an "STA context" |
| * |
| * On STA - Add the AP to which this STA is joining in an |
| * "STA context" |
| */ |
| struct wcn36xx_hal_config_sta_params_v1 sta; |
| } __packed; |
| |
| struct wcn36xx_hal_config_bss_req_msg_v1 { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_config_bss_params_v1 bss_params; |
| } __packed; |
| |
| struct wcn36xx_hal_config_bss_rsp_params { |
| /* Success or Failure */ |
| u32 status; |
| |
| /* BSS index allocated by HAL */ |
| u8 bss_index; |
| |
| /* DPU descriptor index for PTK */ |
| u8 dpu_desc_index; |
| |
| /* PTK DPU signature */ |
| u8 ucast_dpu_signature; |
| |
| /* DPU descriptor index for GTK */ |
| u8 bcast_dpu_desc_indx; |
| |
| /* GTK DPU signature */ |
| u8 bcast_dpu_signature; |
| |
| /* DPU descriptor for IGTK */ |
| u8 mgmt_dpu_desc_index; |
| |
| /* IGTK DPU signature */ |
| u8 mgmt_dpu_signature; |
| |
| /* Station Index for BSS entry */ |
| u8 bss_sta_index; |
| |
| /* Self station index for this BSS */ |
| u8 bss_self_sta_index; |
| |
| /* Bcast station for buffering bcast frames in AP role */ |
| u8 bss_bcast_sta_idx; |
| |
| /* MAC Address of STA(PEER/SELF) in staContext of configBSSReq */ |
| u8 mac[ETH_ALEN]; |
| |
| /* HAL fills in the tx power used for mgmt frames in this field. */ |
| s8 tx_mgmt_power; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_config_bss_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; |
| } __packed; |
| |
| struct wcn36xx_hal_delete_bss_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* BSS index to be deleted */ |
| u8 bss_index; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_delete_bss_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Success or Failure */ |
| u32 status; |
| |
| /* BSS index that has been deleted */ |
| u8 bss_index; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_join_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Indicates the BSSID to which STA is going to associate */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* Indicates the channel to switch to. */ |
| u8 channel; |
| |
| /* Self STA MAC */ |
| u8 self_sta_mac_addr[ETH_ALEN]; |
| |
| /* Local power constraint */ |
| u8 local_power_constraint; |
| |
| /* Secondary channel offset */ |
| enum phy_chan_bond_state secondary_channel_offset; |
| |
| /* link State */ |
| enum wcn36xx_hal_link_state link_state; |
| |
| /* Max TX power */ |
| s8 max_tx_power; |
| } __packed; |
| |
| struct wcn36xx_hal_join_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* HAL fills in the tx power used for mgmt frames in this field */ |
| u8 tx_mgmt_power; |
| } __packed; |
| |
| struct post_assoc_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| struct wcn36xx_hal_config_sta_params sta_params; |
| struct wcn36xx_hal_config_bss_params bss_params; |
| }; |
| |
| struct post_assoc_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct config_sta_rsp_params sta_rsp_params; |
| struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; |
| }; |
| |
| /* This is used to create a set of WEP keys for a given BSS. */ |
| struct wcn36xx_hal_set_bss_key_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* BSS Index of the BSS */ |
| u8 bss_idx; |
| |
| /* Encryption Type used with peer */ |
| enum ani_ed_type enc_type; |
| |
| /* Number of keys */ |
| u8 num_keys; |
| |
| /* Array of keys. */ |
| struct wcn36xx_hal_keys keys[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; |
| |
| /* Control for Replay Count, 1= Single TID based replay count on Tx |
| * 0 = Per TID based replay count on TX */ |
| u8 single_tid_rc; |
| } __packed; |
| |
| /* tagged version of set bss key */ |
| struct wcn36xx_hal_set_bss_key_req_msg_tagged { |
| struct wcn36xx_hal_set_bss_key_req_msg Msg; |
| u32 tag; |
| } __packed; |
| |
| struct wcn36xx_hal_set_bss_key_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| /* |
| * This is used configure the key information on a given station. |
| * When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate |
| * a preconfigured key from a BSS the station assoicated with; otherwise |
| * a new key descriptor is created based on the key field. |
| */ |
| struct wcn36xx_hal_set_sta_key_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_set_sta_key_params set_sta_key_params; |
| } __packed; |
| |
| struct wcn36xx_hal_set_sta_key_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| struct wcn36xx_hal_remove_bss_key_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* BSS Index of the BSS */ |
| u8 bss_idx; |
| |
| /* Encryption Type used with peer */ |
| enum ani_ed_type enc_type; |
| |
| /* Key Id */ |
| u8 key_id; |
| |
| /* STATIC/DYNAMIC. Used in Nullifying in Key Descriptors for |
| * Static/Dynamic keys */ |
| enum ani_wep_type wep_type; |
| } __packed; |
| |
| struct wcn36xx_hal_remove_bss_key_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| /* |
| * This is used by PE to Remove the key information on a given station. |
| */ |
| struct wcn36xx_hal_remove_sta_key_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* STA Index */ |
| u16 sta_idx; |
| |
| /* Encryption Type used with peer */ |
| enum ani_ed_type enc_type; |
| |
| /* Key Id */ |
| u8 key_id; |
| |
| /* Whether to invalidate the Broadcast key or Unicast key. In case |
| * of WEP, the same key is used for both broadcast and unicast. */ |
| u8 unicast; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_remove_sta_key_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /*success or failure */ |
| u32 status; |
| |
| } __packed; |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| |
| #ifndef OEM_DATA_REQ_SIZE |
| #define OEM_DATA_REQ_SIZE 134 |
| #endif |
| |
| #ifndef OEM_DATA_RSP_SIZE |
| #define OEM_DATA_RSP_SIZE 1968 |
| #endif |
| |
| struct start_oem_data_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 status; |
| tSirMacAddr self_mac_addr; |
| u8 oem_data_req[OEM_DATA_REQ_SIZE]; |
| |
| }; |
| |
| struct start_oem_data_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 oem_data_rsp[OEM_DATA_RSP_SIZE]; |
| }; |
| |
| #endif |
| |
| struct wcn36xx_hal_switch_channel_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Channel number */ |
| u8 channel_number; |
| |
| /* Local power constraint */ |
| u8 local_power_constraint; |
| |
| /* Secondary channel offset */ |
| enum phy_chan_bond_state secondary_channel_offset; |
| |
| /* HAL fills in the tx power used for mgmt frames in this field. */ |
| u8 tx_mgmt_power; |
| |
| /* Max TX power */ |
| u8 max_tx_power; |
| |
| /* Self STA MAC */ |
| u8 self_sta_mac_addr[ETH_ALEN]; |
| |
| /* VO WIFI comment: BSSID needed to identify session. As the |
| * request has power constraints, this should be applied only to |
| * that session Since MTU timing and EDCA are sessionized, this |
| * struct needs to be sessionized and bssid needs to be out of the |
| * VOWifi feature flag V IMP: Keep bssId field at the end of this |
| * msg. It is used to mantain backward compatbility by way of |
| * ignoring if using new host/old FW or old host/new FW since it is |
| * at the end of this struct |
| */ |
| u8 bssid[ETH_ALEN]; |
| } __packed; |
| |
| struct wcn36xx_hal_switch_channel_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Status */ |
| u32 status; |
| |
| /* Channel number - same as in request */ |
| u8 channel_number; |
| |
| /* HAL fills in the tx power used for mgmt frames in this field */ |
| u8 tx_mgmt_power; |
| |
| /* BSSID needed to identify session - same as in request */ |
| u8 bssid[ETH_ALEN]; |
| |
| } __packed; |
| |
| struct update_edca_params_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /*BSS Index */ |
| u16 bss_index; |
| |
| /* Best Effort */ |
| struct wcn36xx_hal_edca_param_record acbe; |
| |
| /* Background */ |
| struct wcn36xx_hal_edca_param_record acbk; |
| |
| /* Video */ |
| struct wcn36xx_hal_edca_param_record acvi; |
| |
| /* Voice */ |
| struct wcn36xx_hal_edca_param_record acvo; |
| }; |
| |
| struct update_edca_params_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct dpu_stats_params { |
| /* Index of STA to which the statistics */ |
| u16 sta_index; |
| |
| /* Encryption mode */ |
| u8 enc_mode; |
| |
| /* status */ |
| u32 status; |
| |
| /* Statistics */ |
| u32 send_blocks; |
| u32 recv_blocks; |
| u32 replays; |
| u8 mic_error_cnt; |
| u32 prot_excl_cnt; |
| u16 format_err_cnt; |
| u16 un_decryptable_cnt; |
| u32 decrypt_err_cnt; |
| u32 decrypt_ok_cnt; |
| }; |
| |
| struct wcn36xx_hal_stats_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Valid STA Idx for per STA stats request */ |
| u32 sta_id; |
| |
| /* Categories of stats requested as specified in eHalStatsMask */ |
| u32 stats_mask; |
| }; |
| |
| struct ani_summary_stats_info { |
| /* Total number of packets(per AC) that were successfully |
| * transmitted with retries */ |
| u32 retry_cnt[4]; |
| |
| /* The number of MSDU packets and MMPDU frames per AC that the |
| * 802.11 station successfully transmitted after more than one |
| * retransmission attempt */ |
| u32 multiple_retry_cnt[4]; |
| |
| /* Total number of packets(per AC) that were successfully |
| * transmitted (with and without retries, including multi-cast, |
| * broadcast) */ |
| u32 tx_frm_cnt[4]; |
| |
| /* Total number of packets that were successfully received (after |
| * appropriate filter rules including multi-cast, broadcast) */ |
| u32 rx_frm_cnt; |
| |
| /* Total number of duplicate frames received successfully */ |
| u32 frm_dup_cnt; |
| |
| /* Total number packets(per AC) failed to transmit */ |
| u32 fail_cnt[4]; |
| |
| /* Total number of RTS/CTS sequence failures for transmission of a |
| * packet */ |
| u32 rts_fail_cnt; |
| |
| /* Total number packets failed transmit because of no ACK from the |
| * remote entity */ |
| u32 ack_fail_cnt; |
| |
| /* Total number of RTS/CTS sequence success for transmission of a |
| * packet */ |
| u32 rts_succ_cnt; |
| |
| /* The sum of the receive error count and dropped-receive-buffer |
| * error count. HAL will provide this as a sum of (FCS error) + |
| * (Fail get BD/PDU in HW) */ |
| u32 rx_discard_cnt; |
| |
| /* |
| * The receive error count. HAL will provide the RxP FCS error |
| * global counter. */ |
| u32 rx_error_cnt; |
| |
| /* The sum of the transmit-directed byte count, transmit-multicast |
| * byte count and transmit-broadcast byte count. HAL will sum TPE |
| * UC/MC/BCAST global counters to provide this. */ |
| u32 tx_byte_cnt; |
| }; |
| |
| /* defines tx_rate_flags */ |
| enum tx_rate_info { |
| /* Legacy rates */ |
| HAL_TX_RATE_LEGACY = 0x1, |
| |
| /* HT20 rates */ |
| HAL_TX_RATE_HT20 = 0x2, |
| |
| /* HT40 rates */ |
| HAL_TX_RATE_HT40 = 0x4, |
| |
| /* Rate with Short guard interval */ |
| HAL_TX_RATE_SGI = 0x8, |
| |
| /* Rate with Long guard interval */ |
| HAL_TX_RATE_LGI = 0x10 |
| }; |
| |
| struct ani_global_class_a_stats_info { |
| /* The number of MPDU frames received by the 802.11 station for |
| * MSDU packets or MMPDU frames */ |
| u32 rx_frag_cnt; |
| |
| /* The number of MPDU frames received by the 802.11 station for |
| * MSDU packets or MMPDU frames when a promiscuous packet filter |
| * was enabled */ |
| u32 promiscuous_rx_frag_cnt; |
| |
| /* The receiver input sensitivity referenced to a FER of 8% at an |
| * MPDU length of 1024 bytes at the antenna connector. Each element |
| * of the array shall correspond to a supported rate and the order |
| * shall be the same as the supporteRates parameter. */ |
| u32 rx_input_sensitivity; |
| |
| /* The maximum transmit power in dBm upto one decimal. for eg: if |
| * it is 10.5dBm, the value would be 105 */ |
| u32 max_pwr; |
| |
| /* Number of times the receiver failed to synchronize with the |
| * incoming signal after detecting the sync in the preamble of the |
| * transmitted PLCP protocol data unit. */ |
| u32 sync_fail_cnt; |
| |
| /* Legacy transmit rate, in units of 500 kbit/sec, for the most |
| * recently transmitted frame */ |
| u32 tx_rate; |
| |
| /* mcs index for HT20 and HT40 rates */ |
| u32 mcs_index; |
| |
| /* to differentiate between HT20 and HT40 rates; short and long |
| * guard interval */ |
| u32 tx_rate_flags; |
| }; |
| |
| struct ani_global_security_stats { |
| /* The number of unencrypted received MPDU frames that the MAC |
| * layer discarded when the IEEE 802.11 dot11ExcludeUnencrypted |
| * management information base (MIB) object is enabled */ |
| u32 rx_wep_unencrypted_frm_cnt; |
| |
| /* The number of received MSDU packets that that the 802.11 station |
| * discarded because of MIC failures */ |
| u32 rx_mic_fail_cnt; |
| |
| /* The number of encrypted MPDU frames that the 802.11 station |
| * failed to decrypt because of a TKIP ICV error */ |
| u32 tkip_icv_err; |
| |
| /* The number of received MPDU frames that the 802.11 discarded |
| * because of an invalid AES-CCMP format */ |
| u32 aes_ccmp_format_err; |
| |
| /* The number of received MPDU frames that the 802.11 station |
| * discarded because of the AES-CCMP replay protection procedure */ |
| u32 aes_ccmp_replay_cnt; |
| |
| /* The number of received MPDU frames that the 802.11 station |
| * discarded because of errors detected by the AES-CCMP decryption |
| * algorithm */ |
| u32 aes_ccmp_decrpt_err; |
| |
| /* The number of encrypted MPDU frames received for which a WEP |
| * decryption key was not available on the 802.11 station */ |
| u32 wep_undecryptable_cnt; |
| |
| /* The number of encrypted MPDU frames that the 802.11 station |
| * failed to decrypt because of a WEP ICV error */ |
| u32 wep_icv_err; |
| |
| /* The number of received encrypted packets that the 802.11 station |
| * successfully decrypted */ |
| u32 rx_decrypt_succ_cnt; |
| |
| /* The number of encrypted packets that the 802.11 station failed |
| * to decrypt */ |
| u32 rx_decrypt_fail_cnt; |
| }; |
| |
| struct ani_global_class_b_stats_info { |
| struct ani_global_security_stats uc_stats; |
| struct ani_global_security_stats mc_bc_stats; |
| }; |
| |
| struct ani_global_class_c_stats_info { |
| /* This counter shall be incremented for a received A-MSDU frame |
| * with the stations MAC address in the address 1 field or an |
| * A-MSDU frame with a group address in the address 1 field */ |
| u32 rx_amsdu_cnt; |
| |
| /* This counter shall be incremented when the MAC receives an AMPDU |
| * from the PHY */ |
| u32 rx_ampdu_cnt; |
| |
| /* This counter shall be incremented when a Frame is transmitted |
| * only on the primary channel */ |
| u32 tx_20_frm_cnt; |
| |
| /* This counter shall be incremented when a Frame is received only |
| * on the primary channel */ |
| u32 rx_20_frm_cnt; |
| |
| /* This counter shall be incremented by the number of MPDUs |
| * received in the A-MPDU when an A-MPDU is received */ |
| u32 rx_mpdu_in_ampdu_cnt; |
| |
| /* This counter shall be incremented when an MPDU delimiter has a |
| * CRC error when this is the first CRC error in the received AMPDU |
| * or when the previous delimiter has been decoded correctly */ |
| u32 ampdu_delimiter_crc_err; |
| }; |
| |
| struct ani_per_sta_stats_info { |
| /* The number of MPDU frames that the 802.11 station transmitted |
| * and acknowledged through a received 802.11 ACK frame */ |
| u32 tx_frag_cnt[4]; |
| |
| /* This counter shall be incremented when an A-MPDU is transmitted */ |
| u32 tx_ampdu_cnt; |
| |
| /* This counter shall increment by the number of MPDUs in the AMPDU |
| * when an A-MPDU is transmitted */ |
| u32 tx_mpdu_in_ampdu_cnt; |
| }; |
| |
| struct wcn36xx_hal_stats_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Success or Failure */ |
| u32 status; |
| |
| /* STA Idx */ |
| u32 sta_index; |
| |
| /* Categories of STATS being returned as per eHalStatsMask */ |
| u32 stats_mask; |
| |
| /* message type is same as the request type */ |
| u16 msg_type; |
| |
| /* length of the entire request, includes the pStatsBuf length too */ |
| u16 msg_len; |
| }; |
| |
| struct wcn36xx_hal_set_link_state_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bssid[ETH_ALEN]; |
| enum wcn36xx_hal_link_state state; |
| u8 self_mac_addr[ETH_ALEN]; |
| |
| } __packed; |
| |
| struct set_link_state_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| /* TSPEC Params */ |
| struct wcn36xx_hal_ts_info_tfc { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| u16 ackPolicy:2; |
| u16 userPrio:3; |
| u16 psb:1; |
| u16 aggregation:1; |
| u16 accessPolicy:2; |
| u16 direction:2; |
| u16 tsid:4; |
| u16 trafficType:1; |
| #else |
| u16 trafficType:1; |
| u16 tsid:4; |
| u16 direction:2; |
| u16 accessPolicy:2; |
| u16 aggregation:1; |
| u16 psb:1; |
| u16 userPrio:3; |
| u16 ackPolicy:2; |
| #endif |
| }; |
| |
| /* Flag to schedule the traffic type */ |
| struct wcn36xx_hal_ts_info_sch { |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| u8 rsvd:7; |
| u8 schedule:1; |
| #else |
| u8 schedule:1; |
| u8 rsvd:7; |
| #endif |
| }; |
| |
| /* Traffic and scheduling info */ |
| struct wcn36xx_hal_ts_info { |
| struct wcn36xx_hal_ts_info_tfc traffic; |
| struct wcn36xx_hal_ts_info_sch schedule; |
| }; |
| |
| /* Information elements */ |
| struct wcn36xx_hal_tspec_ie { |
| u8 type; |
| u8 length; |
| struct wcn36xx_hal_ts_info ts_info; |
| u16 nom_msdu_size; |
| u16 max_msdu_size; |
| u32 min_svc_interval; |
| u32 max_svc_interval; |
| u32 inact_interval; |
| u32 suspend_interval; |
| u32 svc_start_time; |
| u32 min_data_rate; |
| u32 mean_data_rate; |
| u32 peak_data_rate; |
| u32 max_burst_sz; |
| u32 delay_bound; |
| u32 min_phy_rate; |
| u16 surplus_bw; |
| u16 medium_time; |
| }; |
| |
| struct add_ts_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index */ |
| u16 sta_index; |
| |
| /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS */ |
| u16 tspec_index; |
| |
| /* To program TPE with required parameters */ |
| struct wcn36xx_hal_tspec_ie tspec; |
| |
| /* U-APSD Flags: 1b per AC. Encoded as follows: |
| b7 b6 b5 b4 b3 b2 b1 b0 = |
| X X X X BE BK VI VO */ |
| u8 uapsd; |
| |
| /* These parameters are for all the access categories */ |
| |
| /* Service Interval */ |
| u32 service_interval[WCN36XX_HAL_MAX_AC]; |
| |
| /* Suspend Interval */ |
| u32 suspend_interval[WCN36XX_HAL_MAX_AC]; |
| |
| /* Delay Interval */ |
| u32 delay_interval[WCN36XX_HAL_MAX_AC]; |
| }; |
| |
| struct add_rs_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct del_ts_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index */ |
| u16 sta_index; |
| |
| /* TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS */ |
| u16 tspec_index; |
| |
| /* To lookup station id using the mac address */ |
| u8 bssid[ETH_ALEN]; |
| }; |
| |
| struct del_ts_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| /* End of TSpec Parameters */ |
| |
| /* Start of BLOCK ACK related Parameters */ |
| |
| struct wcn36xx_hal_add_ba_session_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index */ |
| u16 sta_index; |
| |
| /* Peer MAC Address */ |
| u8 mac_addr[ETH_ALEN]; |
| |
| /* ADDBA Action Frame dialog token |
| HAL will not interpret this object */ |
| u8 dialog_token; |
| |
| /* TID for which the BA is being setup |
| This identifies the TC or TS of interest */ |
| u8 tid; |
| |
| /* 0 - Delayed BA (Not supported) |
| 1 - Immediate BA */ |
| u8 policy; |
| |
| /* Indicates the number of buffers for this TID (baTID) |
| NOTE - This is the requested buffer size. When this |
| is processed by HAL and subsequently by HDD, it is |
| possible that HDD may change this buffer size. Any |
| change in the buffer size should be noted by PE and |
| advertized appropriately in the ADDBA response */ |
| u16 buffer_size; |
| |
| /* BA timeout in TU's 0 means no timeout will occur */ |
| u16 timeout; |
| |
| /* b0..b3 - Fragment Number - Always set to 0 |
| b4..b15 - Starting Sequence Number of first MSDU |
| for which this BA is setup */ |
| u16 ssn; |
| |
| /* ADDBA direction |
| 1 - Originator |
| 0 - Recipient */ |
| u8 direction; |
| } __packed; |
| |
| struct wcn36xx_hal_add_ba_session_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* Dialog token */ |
| u8 dialog_token; |
| |
| /* TID for which the BA session has been setup */ |
| u8 ba_tid; |
| |
| /* BA Buffer Size allocated for the current BA session */ |
| u8 ba_buffer_size; |
| |
| u8 ba_session_id; |
| |
| /* Reordering Window buffer */ |
| u8 win_size; |
| |
| /* Station Index to id the sta */ |
| u8 sta_index; |
| |
| /* Starting Sequence Number */ |
| u16 ssn; |
| } __packed; |
| |
| struct wcn36xx_hal_add_ba_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Session Id */ |
| u8 session_id; |
| |
| /* Reorder Window Size */ |
| u8 win_size; |
| /* Old FW 1.2.2.4 does not support this*/ |
| #ifdef FEATURE_ON_CHIP_REORDERING |
| u8 reordering_done_on_chip; |
| #endif |
| } __packed; |
| |
| struct wcn36xx_hal_add_ba_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* Dialog token */ |
| u8 dialog_token; |
| } __packed; |
| |
| struct add_ba_info { |
| u16 ba_enable:1; |
| u16 starting_seq_num:12; |
| u16 reserved:3; |
| }; |
| |
| struct wcn36xx_hal_trigger_ba_rsp_candidate { |
| u8 sta_addr[ETH_ALEN]; |
| struct add_ba_info ba_info[STACFG_MAX_TC]; |
| } __packed; |
| |
| struct wcn36xx_hal_trigger_ba_req_candidate { |
| u8 sta_index; |
| u8 tid_bitmap; |
| } __packed; |
| |
| struct wcn36xx_hal_trigger_ba_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Session Id */ |
| u8 session_id; |
| |
| /* baCandidateCnt is followed by trigger BA |
| * Candidate List(tTriggerBaCandidate) |
| */ |
| u16 candidate_cnt; |
| |
| } __packed; |
| |
| struct wcn36xx_hal_trigger_ba_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* TO SUPPORT BT-AMP */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* baCandidateCnt is followed by trigger BA |
| * Rsp Candidate List(tTriggerRspBaCandidate) |
| */ |
| u16 candidate_cnt; |
| } __packed; |
| |
| struct wcn36xx_hal_del_ba_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index */ |
| u16 sta_index; |
| |
| /* TID for which the BA session is being deleted */ |
| u8 tid; |
| |
| /* DELBA direction |
| 1 - Originator |
| 0 - Recipient */ |
| u8 direction; |
| } __packed; |
| |
| struct wcn36xx_hal_del_ba_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| } __packed; |
| |
| struct tsm_stats_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Traffic Id */ |
| u8 tid; |
| |
| u8 bssid[ETH_ALEN]; |
| }; |
| |
| struct tsm_stats_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /*success or failure */ |
| u32 status; |
| |
| /* Uplink Packet Queue delay */ |
| u16 uplink_pkt_queue_delay; |
| |
| /* Uplink Packet Queue delay histogram */ |
| u16 uplink_pkt_queue_delay_hist[4]; |
| |
| /* Uplink Packet Transmit delay */ |
| u32 uplink_pkt_tx_delay; |
| |
| /* Uplink Packet loss */ |
| u16 uplink_pkt_loss; |
| |
| /* Uplink Packet count */ |
| u16 uplink_pkt_count; |
| |
| /* Roaming count */ |
| u8 roaming_count; |
| |
| /* Roaming Delay */ |
| u16 roaming_delay; |
| }; |
| |
| struct set_key_done_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /*bssid of the keys */ |
| u8 bssidx; |
| u8 enc_type; |
| }; |
| |
| struct wcn36xx_hal_nv_img_download_req_msg { |
| /* Note: The length specified in wcn36xx_hal_nv_img_download_req_msg |
| * messages should be |
| * header.len = sizeof(wcn36xx_hal_nv_img_download_req_msg) + |
| * nv_img_buffer_size */ |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Fragment sequence number of the NV Image. Note that NV Image |
| * might not fit into one message due to size limitation of the SMD |
| * channel FIFO. UMAC can hence choose to chop the NV blob into |
| * multiple fragments starting with seqeunce number 0, 1, 2 etc. |
| * The last fragment MUST be indicated by marking the |
| * isLastFragment field to 1. Note that all the NV blobs would be |
| * concatenated together by HAL without any padding bytes in |
| * between.*/ |
| u16 frag_number; |
| |
| /* Is this the last fragment? When set to 1 it indicates that no |
| * more fragments will be sent by UMAC and HAL can concatenate all |
| * the NV blobs rcvd & proceed with the parsing. HAL would generate |
| * a WCN36XX_HAL_DOWNLOAD_NV_RSP to the WCN36XX_HAL_DOWNLOAD_NV_REQ |
| * after it receives each fragment */ |
| u16 last_fragment; |
| |
| /* NV Image size (number of bytes) */ |
| u32 nv_img_buffer_size; |
| |
| /* Following the 'nv_img_buffer_size', there should be |
| * nv_img_buffer_size bytes of NV Image i.e. |
| * u8[nv_img_buffer_size] */ |
| } __packed; |
| |
| struct wcn36xx_hal_nv_img_download_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Success or Failure. HAL would generate a |
| * WCN36XX_HAL_DOWNLOAD_NV_RSP after each fragment */ |
| u32 status; |
| } __packed; |
| |
| struct wcn36xx_hal_nv_store_ind { |
| /* Note: The length specified in tHalNvStoreInd messages should be |
| * header.msgLen = sizeof(tHalNvStoreInd) + nvBlobSize */ |
| struct wcn36xx_hal_msg_header header; |
| |
| /* NV Item */ |
| u32 table_id; |
| |
| /* Size of NV Blob */ |
| u32 nv_blob_size; |
| |
| /* Following the 'nvBlobSize', there should be nvBlobSize bytes of |
| * NV blob i.e. u8[nvBlobSize] */ |
| }; |
| |
| /* End of Block Ack Related Parameters */ |
| |
| #define WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE 6 |
| |
| /* Definition for MIC failure indication MAC reports this each time a MIC |
| * failure occures on Rx TKIP packet |
| */ |
| struct mic_failure_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bssid[ETH_ALEN]; |
| |
| /* address used to compute MIC */ |
| u8 src_addr[ETH_ALEN]; |
| |
| /* transmitter address */ |
| u8 ta_addr[ETH_ALEN]; |
| |
| u8 dst_addr[ETH_ALEN]; |
| |
| u8 multicast; |
| |
| /* first byte of IV */ |
| u8 iv1; |
| |
| /* second byte of IV */ |
| u8 key_id; |
| |
| /* sequence number */ |
| u8 tsc[WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE]; |
| |
| /* receive address */ |
| u8 rx_addr[ETH_ALEN]; |
| }; |
| |
| struct update_vht_op_mode_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u16 op_mode; |
| u16 sta_id; |
| }; |
| |
| struct update_vht_op_mode_params_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 status; |
| }; |
| |
| struct update_beacon_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bss_index; |
| |
| /* shortPreamble mode. HAL should update all the STA rates when it |
| * receives this message */ |
| u8 short_preamble; |
| |
| /* short Slot time. */ |
| u8 short_slot_time; |
| |
| /* Beacon Interval */ |
| u16 beacon_interval; |
| |
| /* Protection related */ |
| u8 lla_coexist; |
| u8 llb_coexist; |
| u8 llg_coexist; |
| u8 ht20_coexist; |
| u8 lln_non_gf_coexist; |
| u8 lsig_tx_op_protection_full_support; |
| u8 rifs_mode; |
| |
| u16 param_change_bitmap; |
| }; |
| |
| struct update_beacon_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_send_beacon_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* length of the template. */ |
| u32 beacon_length; |
| |
| /* Beacon data. */ |
| u8 beacon[BEACON_TEMPLATE_SIZE]; |
| |
| u8 bssid[ETH_ALEN]; |
| |
| /* TIM IE offset from the beginning of the template. */ |
| u32 tim_ie_offset; |
| |
| /* P2P IE offset from the begining of the template */ |
| u16 p2p_ie_offset; |
| } __packed; |
| |
| struct send_beacon_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| u32 status; |
| } __packed; |
| |
| struct enable_radar_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bssid[ETH_ALEN]; |
| u8 channel; |
| }; |
| |
| struct enable_radar_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Link Parameters */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct radar_detect_intr_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 radar_det_channel; |
| }; |
| |
| struct radar_detect_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* channel number in which the RADAR detected */ |
| u8 channel_number; |
| |
| /* RADAR pulse width in usecond */ |
| u16 radar_pulse_width; |
| |
| /* Number of RADAR pulses */ |
| u16 num_radar_pulse; |
| }; |
| |
| struct wcn36xx_hal_get_tpc_report_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 sta[ETH_ALEN]; |
| u8 dialog_token; |
| u8 txpower; |
| }; |
| |
| struct wcn36xx_hal_get_tpc_report_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_send_probe_resp_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 probe_resp_template[BEACON_TEMPLATE_SIZE]; |
| u32 probe_resp_template_len; |
| u32 proxy_probe_req_valid_ie_bmap[8]; |
| u8 bssid[ETH_ALEN]; |
| }; |
| |
| struct send_probe_resp_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct send_unknown_frame_rx_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_delete_sta_context_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u16 aid; |
| u16 sta_id; |
| |
| /* TO SUPPORT BT-AMP */ |
| u8 bssid[ETH_ALEN]; |
| |
| /* HAL copies bssid from the sta table. */ |
| u8 addr2[ETH_ALEN]; |
| |
| /* To unify the keepalive / unknown A2 / tim-based disa */ |
| u16 reason_code; |
| } __packed; |
| |
| struct indicate_del_sta { |
| struct wcn36xx_hal_msg_header header; |
| u8 aid; |
| u8 sta_index; |
| u8 bss_index; |
| u8 reason_code; |
| u32 status; |
| }; |
| |
| struct bt_amp_event_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| enum bt_amp_event_type btAmpEventType; |
| }; |
| |
| struct bt_amp_event_rsp { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct tl_hal_flush_ac_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index. originates from HAL */ |
| u8 sta_id; |
| |
| /* TID for which the transmit queue is being flushed */ |
| u8 tid; |
| }; |
| |
| struct tl_hal_flush_ac_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index. originates from HAL */ |
| u8 sta_id; |
| |
| /* TID for which the transmit queue is being flushed */ |
| u8 tid; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_enter_imps_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| }; |
| |
| struct wcn36xx_hal_exit_imps_req { |
| struct wcn36xx_hal_msg_header header; |
| }; |
| |
| struct wcn36xx_hal_enter_bmps_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bss_index; |
| |
| /* TBTT value derived from the last beacon */ |
| #ifndef BUILD_QWPTTSTATIC |
| u64 tbtt; |
| #endif |
| u8 dtim_count; |
| |
| /* DTIM period given to HAL during association may not be valid, if |
| * association is based on ProbeRsp instead of beacon. */ |
| u8 dtim_period; |
| |
| /* For CCX and 11R Roaming */ |
| u32 rssi_filter_period; |
| |
| u32 num_beacon_per_rssi_average; |
| u8 rssi_filter_enable; |
| } __packed; |
| |
| struct wcn36xx_hal_exit_bmps_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 send_data_null; |
| u8 bss_index; |
| } __packed; |
| |
| struct wcn36xx_hal_missed_beacon_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bss_index; |
| } __packed; |
| |
| /* Beacon Filtering data structures */ |
| |
| /* The above structure would be followed by multiple of below mentioned |
| * structure |
| */ |
| struct beacon_filter_ie { |
| u8 element_id; |
| u8 check_ie_presence; |
| u8 offset; |
| u8 value; |
| u8 bitmask; |
| u8 ref; |
| }; |
| |
| struct wcn36xx_hal_add_bcn_filter_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u16 capability_info; |
| u16 capability_mask; |
| u16 beacon_interval; |
| u16 ie_num; |
| u8 bss_index; |
| u8 reserved; |
| }; |
| |
| struct wcn36xx_hal_rem_bcn_filter_req { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 ie_Count; |
| u8 rem_ie_id[1]; |
| }; |
| |
| #define WCN36XX_HAL_IPV4_ARP_REPLY_OFFLOAD 0 |
| #define WCN36XX_HAL_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1 |
| #define WCN36XX_HAL_IPV6_NS_OFFLOAD 2 |
| #define WCN36XX_HAL_IPV6_ADDR_LEN 16 |
| #define WCN36XX_HAL_OFFLOAD_DISABLE 0 |
| #define WCN36XX_HAL_OFFLOAD_ENABLE 1 |
| #define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE 0x2 |
| #define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE \ |
| (HAL_OFFLOAD_ENABLE|HAL_OFFLOAD_BCAST_FILTER_ENABLE) |
| |
| struct wcn36xx_hal_ns_offload_params { |
| u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; |
| u8 self_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; |
| |
| /* Only support 2 possible Network Advertisement IPv6 address */ |
| u8 target_ipv6_addr1[WCN36XX_HAL_IPV6_ADDR_LEN]; |
| u8 target_ipv6_addr2[WCN36XX_HAL_IPV6_ADDR_LEN]; |
| |
| u8 self_addr[ETH_ALEN]; |
| u8 src_ipv6_addr_valid:1; |
| u8 target_ipv6_addr1_valid:1; |
| u8 target_ipv6_addr2_valid:1; |
| u8 reserved1:5; |
| |
| /* make it DWORD aligned */ |
| u8 reserved2; |
| |
| /* slot index for this offload */ |
| u32 slot_index; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_host_offload_req { |
| u8 offload_Type; |
| |
| /* enable or disable */ |
| u8 enable; |
| |
| union { |
| u8 host_ipv4_addr[4]; |
| u8 host_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; |
| } u; |
| }; |
| |
| struct wcn36xx_hal_host_offload_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| struct wcn36xx_hal_host_offload_req host_offload_params; |
| struct wcn36xx_hal_ns_offload_params ns_offload_params; |
| }; |
| |
| /* Packet Types. */ |
| #define WCN36XX_HAL_KEEP_ALIVE_NULL_PKT 1 |
| #define WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 |
| |
| /* Enable or disable keep alive */ |
| #define WCN36XX_HAL_KEEP_ALIVE_DISABLE 0 |
| #define WCN36XX_HAL_KEEP_ALIVE_ENABLE 1 |
| #define WCN36XX_KEEP_ALIVE_TIME_PERIOD 30 /* unit: s */ |
| |
| /* Keep Alive request. */ |
| struct wcn36xx_hal_keep_alive_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 packet_type; |
| u32 time_period; |
| u8 host_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; |
| u8 dest_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; |
| u8 dest_addr[ETH_ALEN]; |
| u8 bss_index; |
| } __packed; |
| |
| struct wcn36xx_hal_rssi_threshold_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| s8 threshold1:8; |
| s8 threshold2:8; |
| s8 threshold3:8; |
| u8 thres1_pos_notify:1; |
| u8 thres1_neg_notify:1; |
| u8 thres2_pos_notify:1; |
| u8 thres2_neg_notify:1; |
| u8 thres3_pos_notify:1; |
| u8 thres3_neg_notify:1; |
| u8 reserved10:2; |
| }; |
| |
| struct wcn36xx_hal_enter_uapsd_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bk_delivery:1; |
| u8 be_delivery:1; |
| u8 vi_delivery:1; |
| u8 vo_delivery:1; |
| u8 bk_trigger:1; |
| u8 be_trigger:1; |
| u8 vi_trigger:1; |
| u8 vo_trigger:1; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_exit_uapsd_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| u8 bss_index; |
| }; |
| |
| #define WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE 128 |
| #define WCN36XX_HAL_WOWL_BCAST_MAX_NUM_PATTERNS 16 |
| |
| struct wcn36xx_hal_wowl_add_bcast_ptrn_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Pattern ID */ |
| u8 id; |
| |
| /* Pattern byte offset from beginning of the 802.11 packet to start |
| * of the wake-up pattern */ |
| u8 byte_Offset; |
| |
| /* Non-Zero Pattern size */ |
| u8 size; |
| |
| /* Pattern */ |
| u8 pattern[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; |
| |
| /* Non-zero pattern mask size */ |
| u8 mask_size; |
| |
| /* Pattern mask */ |
| u8 mask[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; |
| |
| /* Extra pattern */ |
| u8 extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; |
| |
| /* Extra pattern mask */ |
| u8 mask_extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; |
| |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_wow_del_bcast_ptrn_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Pattern ID of the wakeup pattern to be deleted */ |
| u8 id; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_wowl_enter_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Enables/disables magic packet filtering */ |
| u8 magic_packet_enable; |
| |
| /* Magic pattern */ |
| u8 magic_pattern[ETH_ALEN]; |
| |
| /* Enables/disables packet pattern filtering in firmware. Enabling |
| * this flag enables broadcast pattern matching in Firmware. If |
| * unicast pattern matching is also desired, |
| * ucUcastPatternFilteringEnable flag must be set tot true as well |
| */ |
| u8 pattern_filtering_enable; |
| |
| /* Enables/disables unicast packet pattern filtering. This flag |
| * specifies whether we want to do pattern match on unicast packets |
| * as well and not just broadcast packets. This flag has no effect |
| * if the ucPatternFilteringEnable (main controlling flag) is set |
| * to false |
| */ |
| u8 ucast_pattern_filtering_enable; |
| |
| /* This configuration is valid only when magicPktEnable=1. It |
| * requests hardware to wake up when it receives the Channel Switch |
| * Action Frame. |
| */ |
| u8 wow_channel_switch_receive; |
| |
| /* This configuration is valid only when magicPktEnable=1. It |
| * requests hardware to wake up when it receives the |
| * Deauthentication Frame. |
| */ |
| u8 wow_deauth_receive; |
| |
| /* This configuration is valid only when magicPktEnable=1. It |
| * requests hardware to wake up when it receives the Disassociation |
| * Frame. |
| */ |
| u8 wow_disassoc_receive; |
| |
| /* This configuration is valid only when magicPktEnable=1. It |
| * requests hardware to wake up when it has missed consecutive |
| * beacons. This is a hardware register configuration (NOT a |
| * firmware configuration). |
| */ |
| u8 wow_max_missed_beacons; |
| |
| /* This configuration is valid only when magicPktEnable=1. This is |
| * a timeout value in units of microsec. It requests hardware to |
| * unconditionally wake up after it has stayed in WoWLAN mode for |
| * some time. Set 0 to disable this feature. |
| */ |
| u8 wow_max_sleep; |
| |
| /* This configuration directs the WoW packet filtering to look for |
| * EAP-ID requests embedded in EAPOL frames and use this as a wake |
| * source. |
| */ |
| u8 wow_eap_id_request_enable; |
| |
| /* This configuration directs the WoW packet filtering to look for |
| * EAPOL-4WAY requests and use this as a wake source. |
| */ |
| u8 wow_eapol_4way_enable; |
| |
| /* This configuration allows a host wakeup on an network scan |
| * offload match. |
| */ |
| u8 wow_net_scan_offload_match; |
| |
| /* This configuration allows a host wakeup on any GTK rekeying |
| * error. |
| */ |
| u8 wow_gtk_rekey_error; |
| |
| /* This configuration allows a host wakeup on BSS connection loss. |
| */ |
| u8 wow_bss_connection_loss; |
| |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_wowl_exit_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_get_rssi_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| }; |
| |
| struct wcn36xx_hal_get_roam_rssi_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Valid STA Idx for per STA stats request */ |
| u32 sta_id; |
| }; |
| |
| struct wcn36xx_hal_set_uapsd_ac_params_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* STA index */ |
| u8 sta_idx; |
| |
| /* Access Category */ |
| u8 ac; |
| |
| /* User Priority */ |
| u8 up; |
| |
| /* Service Interval */ |
| u32 service_interval; |
| |
| /* Suspend Interval */ |
| u32 suspend_interval; |
| |
| /* Delay Interval */ |
| u32 delay_interval; |
| }; |
| |
| struct wcn36xx_hal_configure_rxp_filter_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 set_mcst_bcst_filter_setting; |
| u8 set_mcst_bcst_filter; |
| }; |
| |
| struct wcn36xx_hal_enter_imps_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_exit_imps_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_enter_bmps_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u8 bss_index; |
| } __packed; |
| |
| struct wcn36xx_hal_exit_bmps_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u8 bss_index; |
| } __packed; |
| |
| struct wcn36xx_hal_enter_uapsd_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_exit_uapsd_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_rssi_notification_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 rssi_thres1_pos_cross:1; |
| u32 rssi_thres1_neg_cross:1; |
| u32 rssi_thres2_pos_cross:1; |
| u32 rssi_thres2_neg_cross:1; |
| u32 rssi_thres3_pos_cross:1; |
| u32 rssi_thres3_neg_cross:1; |
| u32 avg_rssi:8; |
| u32 reserved:18; |
| |
| }; |
| |
| struct wcn36xx_hal_get_rssio_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| s8 rssi; |
| |
| }; |
| |
| struct wcn36xx_hal_get_roam_rssi_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| u8 sta_id; |
| s8 rssi; |
| }; |
| |
| struct wcn36xx_hal_wowl_enter_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_wowl_exit_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_add_bcn_filter_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_rem_bcn_filter_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_add_wowl_bcast_ptrn_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_del_wowl_bcast_ptrn_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| u8 bss_index; |
| }; |
| |
| struct wcn36xx_hal_host_offload_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_keep_alive_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_set_rssi_thresh_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_set_uapsd_ac_params_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_configure_rxp_filter_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct set_max_tx_pwr_req { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* BSSID is needed to identify which session issued this request. |
| * As the request has power constraints, this should be applied |
| * only to that session */ |
| u8 bssid[ETH_ALEN]; |
| |
| u8 self_addr[ETH_ALEN]; |
| |
| /* In request, power == MaxTx power to be used. */ |
| u8 power; |
| }; |
| |
| struct set_max_tx_pwr_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* power == tx power used for management frames */ |
| u8 power; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct set_tx_pwr_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* TX Power in milli watts */ |
| u32 tx_power; |
| |
| u8 bss_index; |
| }; |
| |
| struct set_tx_pwr_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct get_tx_pwr_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 sta_id; |
| }; |
| |
| struct get_tx_pwr_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* TX Power in milli watts */ |
| u32 tx_power; |
| }; |
| |
| struct set_p2p_gonoa_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 opp_ps; |
| u32 ct_window; |
| u8 count; |
| u32 duration; |
| u32 interval; |
| u32 single_noa_duration; |
| u8 ps_selection; |
| }; |
| |
| struct set_p2p_gonoa_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_add_sta_self_req { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 self_addr[ETH_ALEN]; |
| u32 status; |
| } __packed; |
| |
| struct wcn36xx_hal_add_sta_self_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* Self STA Index */ |
| u8 self_sta_index; |
| |
| /* DPU Index (IGTK, PTK, GTK all same) */ |
| u8 dpu_index; |
| |
| /* DPU Signature */ |
| u8 dpu_signature; |
| } __packed; |
| |
| struct wcn36xx_hal_del_sta_self_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 self_addr[ETH_ALEN]; |
| } __packed; |
| |
| struct wcn36xx_hal_del_sta_self_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /*success or failure */ |
| u32 status; |
| |
| u8 self_addr[ETH_ALEN]; |
| } __packed; |
| |
| struct aggr_add_ts_req { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Station Index */ |
| u16 sta_idx; |
| |
| /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS. |
| * This will carry the bitmap with the bit positions representing |
| * different AC.s */ |
| u16 tspec_index; |
| |
| /* Tspec info per AC To program TPE with required parameters */ |
| struct wcn36xx_hal_tspec_ie tspec[WCN36XX_HAL_MAX_AC]; |
| |
| /* U-APSD Flags: 1b per AC. Encoded as follows: |
| b7 b6 b5 b4 b3 b2 b1 b0 = |
| X X X X BE BK VI VO */ |
| u8 uapsd; |
| |
| /* These parameters are for all the access categories */ |
| |
| /* Service Interval */ |
| u32 service_interval[WCN36XX_HAL_MAX_AC]; |
| |
| /* Suspend Interval */ |
| u32 suspend_interval[WCN36XX_HAL_MAX_AC]; |
| |
| /* Delay Interval */ |
| u32 delay_interval[WCN36XX_HAL_MAX_AC]; |
| }; |
| |
| struct aggr_add_ts_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status0; |
| |
| /* FIXME PRIMA for future use for 11R */ |
| u32 status1; |
| }; |
| |
| struct wcn36xx_hal_configure_apps_cpu_wakeup_state_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 is_apps_cpu_awake; |
| }; |
| |
| struct wcn36xx_hal_configure_apps_cpu_wakeup_state_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_dump_cmd_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 arg1; |
| u32 arg2; |
| u32 arg3; |
| u32 arg4; |
| u32 arg5; |
| } __packed; |
| |
| struct wcn36xx_hal_dump_cmd_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| |
| /* Length of the responce message */ |
| u32 rsp_length; |
| |
| /* FIXME: Currently considering the the responce will be less than |
| * 100bytes */ |
| u8 rsp_buffer[DUMPCMD_RSP_BUFFER]; |
| } __packed; |
| |
| #define WLAN_COEX_IND_DATA_SIZE (4) |
| #define WLAN_COEX_IND_TYPE_DISABLE_HB_MONITOR (0) |
| #define WLAN_COEX_IND_TYPE_ENABLE_HB_MONITOR (1) |
| |
| struct coex_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Coex Indication Type */ |
| u32 type; |
| |
| /* Coex Indication Data */ |
| u32 data[WLAN_COEX_IND_DATA_SIZE]; |
| }; |
| |
| struct wcn36xx_hal_tx_compl_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Tx Complete Indication Success or Failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_wlan_host_suspend_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 configured_mcst_bcst_filter_setting; |
| u32 active_session_count; |
| }; |
| |
| struct wcn36xx_hal_wlan_exclude_unencrpted_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 dot11_exclude_unencrypted; |
| u8 bssid[ETH_ALEN]; |
| }; |
| |
| struct noa_attr_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 index; |
| u8 opp_ps_flag; |
| u16 ctwin; |
| |
| u16 noa1_interval_count; |
| u16 bss_index; |
| u32 noa1_duration; |
| u32 noa1_interval; |
| u32 noa1_starttime; |
| |
| u16 noa2_interval_count; |
| u16 reserved2; |
| u32 noa2_duration; |
| u32 noa2_interval; |
| u32 noa2_start_time; |
| |
| u32 status; |
| }; |
| |
| struct noa_start_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u32 status; |
| u32 bss_index; |
| }; |
| |
| struct wcn36xx_hal_wlan_host_resume_req_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u8 configured_mcst_bcst_filter_setting; |
| }; |
| |
| struct wcn36xx_hal_host_resume_rsp_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* success or failure */ |
| u32 status; |
| }; |
| |
| struct wcn36xx_hal_del_ba_ind_msg { |
| struct wcn36xx_hal_msg_header header; |
| |
| u16 sta_idx; |
| |
| /* Peer MAC Address, whose BA session has timed out */ |
| u8 peer_addr[ETH_ALEN]; |
| |
| /* TID for which a BA session timeout is being triggered */ |
| u8 ba_tid; |
| |
| /* DELBA direction |
| * 1 - Originator |
| * 0 - Recipient |
| */ |
| u8 direction; |
| |
| u32 reason_code; |
| |
| /* TO SUPPORT BT-AMP */ |
| u8 bssid[ETH_ALEN]; |
| }; |
| |
| /* PNO Messages */ |
| |
| /* Max number of channels that a network can be found on */ |
| #define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS 26 |
| |
| /* Max number of channels that a network can be found on */ |
| #define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX 60 |
| |
| /* Maximum numbers of networks supported by PNO */ |
| #define WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS 16 |
| |
| /* The number of scan time intervals that can be programmed into PNO */ |
| #define WCN36XX_HAL_PNO_MAX_SCAN_TIMERS 10 |
| |
| /* Maximum size of the probe template */ |
| #define WCN36XX_HAL_PNO_MAX_PROBE_SIZE 450 |
| |
| /* Type of PNO enabling: |
| * |
| * Immediate - scanning will start immediately and PNO procedure will be |
| * repeated based on timer |
| * |
| * Suspend - scanning will start at suspend |
| * |
| * Resume - scanning will start on system resume |
| */ |
| enum pno_mode { |
| PNO_MODE_IMMEDIATE, |
| PNO_MODE_ON_SUSPEND, |
| PNO_MODE_ON_RESUME, |
| PNO_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* Authentication type */ |
| enum auth_type { |
| AUTH_TYPE_ANY = 0, |
| AUTH_TYPE_OPEN_SYSTEM = 1, |
| |
| /* Upper layer authentication types */ |
| AUTH_TYPE_WPA = 2, |
| AUTH_TYPE_WPA_PSK = 3, |
| |
| AUTH_TYPE_RSN = 4, |
| AUTH_TYPE_RSN_PSK = 5, |
| AUTH_TYPE_FT_RSN = 6, |
| AUTH_TYPE_FT_RSN_PSK = 7, |
| AUTH_TYPE_WAPI_WAI_CERTIFICATE = 8, |
| AUTH_TYPE_WAPI_WAI_PSK = 9, |
| |
| AUTH_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* Encryption type */ |
| enum ed_type { |
| ED_ANY = 0, |
| ED_NONE = 1, |
| ED_WEP = 2, |
| ED_TKIP = 3, |
| ED_CCMP = 4, |
| ED_WPI = 5, |
| |
| ED_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* SSID broadcast type */ |
| enum ssid_bcast_type { |
| BCAST_UNKNOWN = 0, |
| BCAST_NORMAL = 1, |
| BCAST_HIDDEN = 2, |
| |
| BCAST_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE |
| }; |
| |
| /* The network description for which PNO will have to look for */ |
| struct network_type { |
| /* SSID of the BSS */ |
| struct wcn36xx_hal_mac_ssid ssid; |
| |
| /* Authentication type for the network */ |
| enum auth_type authentication; |
| |
| /* Encryption type for the network */ |
| enum ed_type encryption; |
| |
| /* Indicate the channel on which the Network can be found 0 - if |
| * all channels */ |
| u8 channel_count; |
| u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; |
| |
| /* Indicates the RSSI threshold for the network to be considered */ |
| u8 rssi_threshold; |
| }; |
| |
| struct scan_timer { |
| /* How much it should wait */ |
| u32 value; |
| |
| /* How many times it should repeat that wait value 0 - keep using |
| * this timer until PNO is disabled */ |
| u32 repeat; |
| |
| /* e.g: 2 3 4 0 - it will wait 2s between consecutive scans for 3 |
| * times - after that it will wait 4s between consecutive scans |
| * until disabled */ |
| }; |
| |
| /* The network parameters to be sent to the PNO algorithm */ |
| struct scan_timers_type { |
| /* set to 0 if you wish for PNO to use its default telescopic timer */ |
| u8 count; |
| |
| /* A set value represents the amount of time that PNO will wait |
| * between two consecutive scan procedures If the desired is for a |
| * uniform timer that fires always at the exact same interval - one |
| * single value is to be set If there is a desire for a more |
| * complex - telescopic like timer multiple values can be set - |
| * once PNO reaches the end of the array it will continue scanning |
| * at intervals presented by the last value */ |
| struct scan_timer values[WCN36XX_HAL_PNO_MAX_SCAN_TIMERS]; |
| }; |
| |
| /* Preferred network list request */ |
| struct set_pref_netw_list_req { |
| struct wcn36xx_hal_msg_header header; |
| |
| /* Enable PNO */ |
| u32 enable; |
| |
| /* Immediate, On Suspend, On Resume */ |
| enum pno_mode mode; |
| |
| /* Number of networks sent for PNO */ |
| u32 networks_count; |
| |
| /* The networks that PNO needs to look for */ |
| struct network_type networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; |
| |
| /* The scan timers required for PNO */ |
| struct scan_timers_type scan_timers; |
| |
| /* Probe template for 2.4GHz band */ |
| u16 band_24g_probe_size; |
| u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; |
| |
| /* Probe template for 5GHz band */ |
| u16 band_5g_probe_size; |
| u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; |
| }; |
| |
| /* The network description for which PNO will have to look for */ |
| struct network_type_new { |
| /* SSID of the BSS */ |
| struct wcn36xx_hal_mac_ssid ssid; |
| |
| /* Authentication type for the network */ |
| enum auth_type authentication; |
| |
| /* Encryption type for the network */ |
| enum ed_type encryption; |
| |