| /* |
| * Atheros CARL9170 driver |
| * |
| * USB - frontend |
| * |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, see |
| * http://www.gnu.org/licenses/. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * Copyright (c) 2007-2008 Atheros Communications, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/device.h> |
| #include <net/mac80211.h> |
| #include "carl9170.h" |
| #include "cmd.h" |
| #include "hw.h" |
| #include "fwcmd.h" |
| |
| MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); |
| MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); |
| MODULE_FIRMWARE(CARL9170FW_NAME); |
| MODULE_ALIAS("ar9170usb"); |
| MODULE_ALIAS("arusb_lnx"); |
| |
| /* |
| * Note: |
| * |
| * Always update our wiki's device list (located at: |
| * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ), |
| * whenever you add a new device. |
| */ |
| static struct usb_device_id carl9170_usb_ids[] = { |
| /* Atheros 9170 */ |
| { USB_DEVICE(0x0cf3, 0x9170) }, |
| /* Atheros TG121N */ |
| { USB_DEVICE(0x0cf3, 0x1001) }, |
| /* TP-Link TL-WN821N v2 */ |
| { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON | |
| CARL9170_ONE_LED }, |
| /* 3Com Dual Band 802.11n USB Adapter */ |
| { USB_DEVICE(0x0cf3, 0x1010) }, |
| /* H3C Dual Band 802.11n USB Adapter */ |
| { USB_DEVICE(0x0cf3, 0x1011) }, |
| /* Cace Airpcap NX */ |
| { USB_DEVICE(0xcace, 0x0300) }, |
| /* D-Link DWA 160 A1 */ |
| { USB_DEVICE(0x07d1, 0x3c10) }, |
| /* D-Link DWA 160 A2 */ |
| { USB_DEVICE(0x07d1, 0x3a09) }, |
| /* D-Link DWA 130 D */ |
| { USB_DEVICE(0x07d1, 0x3a0f) }, |
| /* Netgear WNA1000 */ |
| { USB_DEVICE(0x0846, 0x9040) }, |
| /* Netgear WNDA3100 (v1) */ |
| { USB_DEVICE(0x0846, 0x9010) }, |
| /* Netgear WN111 v2 */ |
| { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, |
| /* Zydas ZD1221 */ |
| { USB_DEVICE(0x0ace, 0x1221) }, |
| /* Proxim ORiNOCO 802.11n USB */ |
| { USB_DEVICE(0x1435, 0x0804) }, |
| /* WNC Generic 11n USB Dongle */ |
| { USB_DEVICE(0x1435, 0x0326) }, |
| /* ZyXEL NWD271N */ |
| { USB_DEVICE(0x0586, 0x3417) }, |
| /* Z-Com UB81 BG */ |
| { USB_DEVICE(0x0cde, 0x0023) }, |
| /* Z-Com UB82 ABG */ |
| { USB_DEVICE(0x0cde, 0x0026) }, |
| /* Sphairon Homelink 1202 */ |
| { USB_DEVICE(0x0cde, 0x0027) }, |
| /* Arcadyan WN7512 */ |
| { USB_DEVICE(0x083a, 0xf522) }, |
| /* Planex GWUS300 */ |
| { USB_DEVICE(0x2019, 0x5304) }, |
| /* IO-Data WNGDNUS2 */ |
| { USB_DEVICE(0x04bb, 0x093f) }, |
| /* NEC WL300NU-G */ |
| { USB_DEVICE(0x0409, 0x0249) }, |
| /* NEC WL300NU-AG */ |
| { USB_DEVICE(0x0409, 0x02b4) }, |
| /* AVM FRITZ!WLAN USB Stick N */ |
| { USB_DEVICE(0x057c, 0x8401) }, |
| /* AVM FRITZ!WLAN USB Stick N 2.4 */ |
| { USB_DEVICE(0x057c, 0x8402) }, |
| /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ |
| { USB_DEVICE(0x1668, 0x1200) }, |
| /* Airlive X.USB a/b/g/n */ |
| { USB_DEVICE(0x1b75, 0x9170) }, |
| |
| /* terminate */ |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, carl9170_usb_ids); |
| |
| static void carl9170_usb_submit_data_urb(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| int err; |
| |
| if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS) |
| goto err_acc; |
| |
| urb = usb_get_from_anchor(&ar->tx_wait); |
| if (!urb) |
| goto err_acc; |
| |
| usb_anchor_urb(urb, &ar->tx_anch); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (unlikely(err)) { |
| if (net_ratelimit()) { |
| dev_err(&ar->udev->dev, "tx submit failed (%d)\n", |
| urb->status); |
| } |
| |
| usb_unanchor_urb(urb); |
| usb_anchor_urb(urb, &ar->tx_err); |
| } |
| |
| usb_free_urb(urb); |
| |
| if (likely(err == 0)) |
| return; |
| |
| err_acc: |
| atomic_dec(&ar->tx_anch_urbs); |
| } |
| |
| static void carl9170_usb_tx_data_complete(struct urb *urb) |
| { |
| struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); |
| |
| if (WARN_ON_ONCE(!ar)) { |
| dev_kfree_skb_irq(urb->context); |
| return; |
| } |
| |
| atomic_dec(&ar->tx_anch_urbs); |
| |
| switch (urb->status) { |
| /* everything is fine */ |
| case 0: |
| carl9170_tx_callback(ar, (void *)urb->context); |
| break; |
| |
| /* disconnect */ |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ENODEV: |
| case -ESHUTDOWN: |
| /* |
| * Defer the frame clean-up to the tasklet worker. |
| * This is necessary, because carl9170_tx_drop |
| * does not work in an irqsave context. |
| */ |
| usb_anchor_urb(urb, &ar->tx_err); |
| return; |
| |
| /* a random transmission error has occurred? */ |
| default: |
| if (net_ratelimit()) { |
| dev_err(&ar->udev->dev, "tx failed (%d)\n", |
| urb->status); |
| } |
| |
| usb_anchor_urb(urb, &ar->tx_err); |
| break; |
| } |
| |
| if (likely(IS_STARTED(ar))) |
| carl9170_usb_submit_data_urb(ar); |
| } |
| |
| static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| int err; |
| |
| if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) { |
| atomic_dec(&ar->tx_cmd_urbs); |
| return 0; |
| } |
| |
| urb = usb_get_from_anchor(&ar->tx_cmd); |
| if (!urb) { |
| atomic_dec(&ar->tx_cmd_urbs); |
| return 0; |
| } |
| |
| usb_anchor_urb(urb, &ar->tx_anch); |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (unlikely(err)) { |
| usb_unanchor_urb(urb); |
| atomic_dec(&ar->tx_cmd_urbs); |
| } |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| static void carl9170_usb_cmd_complete(struct urb *urb) |
| { |
| struct ar9170 *ar = urb->context; |
| int err = 0; |
| |
| if (WARN_ON_ONCE(!ar)) |
| return; |
| |
| atomic_dec(&ar->tx_cmd_urbs); |
| |
| switch (urb->status) { |
| /* everything is fine */ |
| case 0: |
| break; |
| |
| /* disconnect */ |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ENODEV: |
| case -ESHUTDOWN: |
| return; |
| |
| default: |
| err = urb->status; |
| break; |
| } |
| |
| if (!IS_INITIALIZED(ar)) |
| return; |
| |
| if (err) |
| dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err); |
| |
| err = carl9170_usb_submit_cmd_urb(ar); |
| if (err) |
| dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err); |
| } |
| |
| static void carl9170_usb_rx_irq_complete(struct urb *urb) |
| { |
| struct ar9170 *ar = urb->context; |
| |
| if (WARN_ON_ONCE(!ar)) |
| return; |
| |
| switch (urb->status) { |
| /* everything is fine */ |
| case 0: |
| break; |
| |
| /* disconnect */ |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ENODEV: |
| case -ESHUTDOWN: |
| return; |
| |
| default: |
| goto resubmit; |
| } |
| |
| /* |
| * While the carl9170 firmware does not use this EP, the |
| * firmware loader in the EEPROM unfortunately does. |
| * Therefore we need to be ready to handle out-of-band |
| * responses and traps in case the firmware crashed and |
| * the loader took over again. |
| */ |
| carl9170_handle_command_response(ar, urb->transfer_buffer, |
| urb->actual_length); |
| |
| resubmit: |
| usb_anchor_urb(urb, &ar->rx_anch); |
| if (unlikely(usb_submit_urb(urb, GFP_ATOMIC))) |
| usb_unanchor_urb(urb); |
| } |
| |
| static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp) |
| { |
| struct urb *urb; |
| int err = 0, runs = 0; |
| |
| while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) && |
| (runs++ < AR9170_NUM_RX_URBS)) { |
| err = -ENOSPC; |
| urb = usb_get_from_anchor(&ar->rx_pool); |
| if (urb) { |
| usb_anchor_urb(urb, &ar->rx_anch); |
| err = usb_submit_urb(urb, gfp); |
| if (unlikely(err)) { |
| usb_unanchor_urb(urb); |
| usb_anchor_urb(urb, &ar->rx_pool); |
| } else { |
| atomic_dec(&ar->rx_pool_urbs); |
| atomic_inc(&ar->rx_anch_urbs); |
| } |
| usb_free_urb(urb); |
| } |
| } |
| |
| return err; |
| } |
| |
| static void carl9170_usb_rx_work(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| int i; |
| |
| for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { |
| urb = usb_get_from_anchor(&ar->rx_work); |
| if (!urb) |
| break; |
| |
| atomic_dec(&ar->rx_work_urbs); |
| if (IS_INITIALIZED(ar)) { |
| carl9170_rx(ar, urb->transfer_buffer, |
| urb->actual_length); |
| } |
| |
| usb_anchor_urb(urb, &ar->rx_pool); |
| atomic_inc(&ar->rx_pool_urbs); |
| |
| usb_free_urb(urb); |
| |
| carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); |
| } |
| } |
| |
| void carl9170_usb_handle_tx_err(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| |
| while ((urb = usb_get_from_anchor(&ar->tx_err))) { |
| struct sk_buff *skb = (void *)urb->context; |
| |
| carl9170_tx_drop(ar, skb); |
| carl9170_tx_callback(ar, skb); |
| usb_free_urb(urb); |
| } |
| } |
| |
| static void carl9170_usb_tasklet(unsigned long data) |
| { |
| struct ar9170 *ar = (struct ar9170 *) data; |
| |
| if (!IS_INITIALIZED(ar)) |
| return; |
| |
| carl9170_usb_rx_work(ar); |
| |
| /* |
| * Strictly speaking: The tx scheduler is not part of the USB system. |
| * But the rx worker returns frames back to the mac80211-stack and |
| * this is the _perfect_ place to generate the next transmissions. |
| */ |
| if (IS_STARTED(ar)) |
| carl9170_tx_scheduler(ar); |
| } |
| |
| static void carl9170_usb_rx_complete(struct urb *urb) |
| { |
| struct ar9170 *ar = (struct ar9170 *)urb->context; |
| int err; |
| |
| if (WARN_ON_ONCE(!ar)) |
| return; |
| |
| atomic_dec(&ar->rx_anch_urbs); |
| |
| switch (urb->status) { |
| case 0: |
| /* rx path */ |
| usb_anchor_urb(urb, &ar->rx_work); |
| atomic_inc(&ar->rx_work_urbs); |
| break; |
| |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ENODEV: |
| case -ESHUTDOWN: |
| /* handle disconnect events*/ |
| return; |
| |
| default: |
| /* handle all other errors */ |
| usb_anchor_urb(urb, &ar->rx_pool); |
| atomic_inc(&ar->rx_pool_urbs); |
| break; |
| } |
| |
| err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); |
| if (unlikely(err)) { |
| /* |
| * usb_submit_rx_urb reported a problem. |
| * In case this is due to a rx buffer shortage, |
| * elevate the tasklet worker priority to |
| * the highest available level. |
| */ |
| tasklet_hi_schedule(&ar->usb_tasklet); |
| |
| if (atomic_read(&ar->rx_anch_urbs) == 0) { |
| /* |
| * The system is too slow to cope with |
| * the enormous workload. We have simply |
| * run out of active rx urbs and this |
| * unfortunately leads to an unpredictable |
| * device. |
| */ |
| |
| ieee80211_queue_work(ar->hw, &ar->ping_work); |
| } |
| } else { |
| /* |
| * Using anything less than _high_ priority absolutely |
| * kills the rx performance my UP-System... |
| */ |
| tasklet_hi_schedule(&ar->usb_tasklet); |
| } |
| } |
| |
| static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp) |
| { |
| struct urb *urb; |
| void *buf; |
| |
| buf = kmalloc(ar->fw.rx_size, gfp); |
| if (!buf) |
| return NULL; |
| |
| urb = usb_alloc_urb(0, gfp); |
| if (!urb) { |
| kfree(buf); |
| return NULL; |
| } |
| |
| usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev, |
| AR9170_USB_EP_RX), buf, ar->fw.rx_size, |
| carl9170_usb_rx_complete, ar); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| return urb; |
| } |
| |
| static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar) |
| { |
| struct urb *urb = NULL; |
| void *ibuf; |
| int err = -ENOMEM; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| goto out; |
| |
| ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL); |
| if (!ibuf) |
| goto out; |
| |
| usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev, |
| AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX, |
| carl9170_usb_rx_irq_complete, ar, 1); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, &ar->rx_anch); |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err) |
| usb_unanchor_urb(urb); |
| |
| out: |
| usb_free_urb(urb); |
| return err; |
| } |
| |
| static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| int i, err = -EINVAL; |
| |
| /* |
| * The driver actively maintains a second shadow |
| * pool for inactive, but fully-prepared rx urbs. |
| * |
| * The pool should help the driver to master huge |
| * workload spikes without running the risk of |
| * undersupplying the hardware or wasting time by |
| * processing rx data (streams) inside the urb |
| * completion (hardirq context). |
| */ |
| for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { |
| urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL); |
| if (!urb) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| |
| usb_anchor_urb(urb, &ar->rx_pool); |
| atomic_inc(&ar->rx_pool_urbs); |
| usb_free_urb(urb); |
| } |
| |
| err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL); |
| if (err) |
| goto err_out; |
| |
| /* the device now waiting for the firmware. */ |
| carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); |
| return 0; |
| |
| err_out: |
| |
| usb_scuttle_anchored_urbs(&ar->rx_pool); |
| usb_scuttle_anchored_urbs(&ar->rx_work); |
| usb_kill_anchored_urbs(&ar->rx_anch); |
| return err; |
| } |
| |
| static int carl9170_usb_flush(struct ar9170 *ar) |
| { |
| struct urb *urb; |
| int ret, err = 0; |
| |
| while ((urb = usb_get_from_anchor(&ar->tx_wait))) { |
| struct sk_buff *skb = (void *)urb->context; |
| carl9170_tx_drop(ar, skb); |
| carl9170_tx_callback(ar, skb); |
| usb_free_urb(urb); |
| } |
| |
| ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); |
| if (ret == 0) |
| err = -ETIMEDOUT; |
| |
| /* lets wait a while until the tx - queues are dried out */ |
| ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); |
| if (ret == 0) |
| err = -ETIMEDOUT; |
| |
| usb_kill_anchored_urbs(&ar->tx_anch); |
| carl9170_usb_handle_tx_err(ar); |
| |
| return err; |
| } |
| |
| static void carl9170_usb_cancel_urbs(struct ar9170 *ar) |
| { |
| int err; |
| |
| carl9170_set_state(ar, CARL9170_UNKNOWN_STATE); |
| |
| err = carl9170_usb_flush(ar); |
| if (err) |
| dev_err(&ar->udev->dev, "stuck tx urbs!\n"); |
| |
| usb_poison_anchored_urbs(&ar->tx_anch); |
| carl9170_usb_handle_tx_err(ar); |
| usb_poison_anchored_urbs(&ar->rx_anch); |
| |
| tasklet_kill(&ar->usb_tasklet); |
| |
| usb_scuttle_anchored_urbs(&ar->rx_work); |
| usb_scuttle_anchored_urbs(&ar->rx_pool); |
| usb_scuttle_anchored_urbs(&ar->tx_cmd); |
| } |
| |
| int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd, |
| const bool free_buf) |
| { |
| struct urb *urb; |
| int err = 0; |
| |
| if (!IS_INITIALIZED(ar)) { |
| err = -EPERM; |
| goto err_free; |
| } |
| |
| if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| err = -ENOMEM; |
| goto err_free; |
| } |
| |
| if (ar->usb_ep_cmd_is_bulk) |
| usb_fill_bulk_urb(urb, ar->udev, |
| usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD), |
| cmd, cmd->hdr.len + 4, |
| carl9170_usb_cmd_complete, ar); |
| else |
| usb_fill_int_urb(urb, ar->udev, |
| usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD), |
| cmd, cmd->hdr.len + 4, |
| carl9170_usb_cmd_complete, ar, 1); |
| |
| if (free_buf) |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, &ar->tx_cmd); |
| usb_free_urb(urb); |
| |
| return carl9170_usb_submit_cmd_urb(ar); |
| |
| err_free: |
| if (free_buf) |
| kfree(cmd); |
| |
| return err; |
| } |
| |
| int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd, |
| unsigned int plen, void *payload, unsigned int outlen, void *out) |
| { |
| int err = -ENOMEM; |
| unsigned long time_left; |
| |
| if (!IS_ACCEPTING_CMD(ar)) |
| return -EIO; |
| |
| if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) |
| might_sleep(); |
| |
| ar->cmd.hdr.len = plen; |
| ar->cmd.hdr.cmd = cmd; |
| /* writing multiple regs fills this buffer already */ |
| if (plen && payload != (u8 *)(ar->cmd.data)) |
| memcpy(ar->cmd.data, payload, plen); |
| |
| spin_lock_bh(&ar->cmd_lock); |
| ar->readbuf = (u8 *)out; |
| ar->readlen = outlen; |
| spin_unlock_bh(&ar->cmd_lock); |
| |
| err = __carl9170_exec_cmd(ar, &ar->cmd, false); |
| |
| if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) { |
| time_left = wait_for_completion_timeout(&ar->cmd_wait, HZ); |
| if (time_left == 0) { |
| err = -ETIMEDOUT; |
| goto err_unbuf; |
| } |
| |
| if (ar->readlen != outlen) { |
| err = -EMSGSIZE; |
| goto err_unbuf; |
| } |
| } |
| |
| return 0; |
| |
| err_unbuf: |
| /* Maybe the device was removed in the moment we were waiting? */ |
| if (IS_STARTED(ar)) { |
| dev_err(&ar->udev->dev, "no command feedback " |
| "received (%d).\n", err); |
| |
| /* provide some maybe useful debug information */ |
| print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE, |
| &ar->cmd, plen + 4); |
| |
| carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT); |
| } |
| |
| /* invalidate to avoid completing the next command prematurely */ |
| spin_lock_bh(&ar->cmd_lock); |
| ar->readbuf = NULL; |
| ar->readlen = 0; |
| spin_unlock_bh(&ar->cmd_lock); |
| |
| return err; |
| } |
| |
| void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| struct urb *urb; |
| struct ar9170_stream *tx_stream; |
| void *data; |
| unsigned int len; |
| |
| if (!IS_STARTED(ar)) |
| goto err_drop; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| goto err_drop; |
| |
| if (ar->fw.tx_stream) { |
| tx_stream = (void *) (skb->data - sizeof(*tx_stream)); |
| |
| len = skb->len + sizeof(*tx_stream); |
| tx_stream->length = cpu_to_le16(len); |
| tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG); |
| data = tx_stream; |
| } else { |
| data = skb->data; |
| len = skb->len; |
| } |
| |
| usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev, |
| AR9170_USB_EP_TX), data, len, |
| carl9170_usb_tx_data_complete, skb); |
| |
| urb->transfer_flags |= URB_ZERO_PACKET; |
| |
| usb_anchor_urb(urb, &ar->tx_wait); |
| |
| usb_free_urb(urb); |
| |
| carl9170_usb_submit_data_urb(ar); |
| return; |
| |
| err_drop: |
| carl9170_tx_drop(ar, skb); |
| carl9170_tx_callback(ar, skb); |
| } |
| |
| static void carl9170_release_firmware(struct ar9170 *ar) |
| { |
| if (ar->fw.fw) { |
| release_firmware(ar->fw.fw); |
| memset(&ar->fw, 0, sizeof(ar->fw)); |
| } |
| } |
| |
| void carl9170_usb_stop(struct ar9170 *ar) |
| { |
| int ret; |
| |
| carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED); |
| |
| ret = carl9170_usb_flush(ar); |
| if (ret) |
| dev_err(&ar->udev->dev, "kill pending tx urbs.\n"); |
| |
| usb_poison_anchored_urbs(&ar->tx_anch); |
| carl9170_usb_handle_tx_err(ar); |
| |
| /* kill any pending command */ |
| spin_lock_bh(&ar->cmd_lock); |
| ar->readlen = 0; |
| spin_unlock_bh(&ar->cmd_lock); |
| complete_all(&ar->cmd_wait); |
| |
| /* This is required to prevent an early completion on _start */ |
| reinit_completion(&ar->cmd_wait); |
| |
| /* |
| * Note: |
| * So far we freed all tx urbs, but we won't dare to touch any rx urbs. |
| * Else we would end up with a unresponsive device... |
| */ |
| } |
| |
| int carl9170_usb_open(struct ar9170 *ar) |
| { |
| usb_unpoison_anchored_urbs(&ar->tx_anch); |
| |
| carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); |
| return 0; |
| } |
| |
| static int carl9170_usb_load_firmware(struct ar9170 *ar) |
| { |
| const u8 *data; |
| u8 *buf; |
| unsigned int transfer; |
| size_t len; |
| u32 addr; |
| int err = 0; |
| |
| buf = kmalloc(4096, GFP_KERNEL); |
| if (!buf) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| |
| data = ar->fw.fw->data; |
| len = ar->fw.fw->size; |
| addr = ar->fw.address; |
| |
| /* this removes the miniboot image */ |
| data += ar->fw.offset; |
| len -= ar->fw.offset; |
| |
| while (len) { |
| transfer = min_t(unsigned int, len, 4096u); |
| memcpy(buf, data, transfer); |
| |
| err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), |
| 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, |
| addr >> 8, 0, buf, transfer, 100); |
| |
| if (err < 0) { |
| kfree(buf); |
| goto err_out; |
| } |
| |
| len -= transfer; |
| data += transfer; |
| addr += transfer; |
| } |
| kfree(buf); |
| |
| err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), |
| 0x31 /* FW DL COMPLETE */, |
| 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200); |
| |
| if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) { |
| err = -ETIMEDOUT; |
| goto err_out; |
| } |
| |
| err = carl9170_echo_test(ar, 0x4a110123); |
| if (err) |
| goto err_out; |
| |
| /* now, start the command response counter */ |
| ar->cmd_seq = -1; |
| |
| return 0; |
| |
| err_out: |
| dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err); |
| return err; |
| } |
| |
| int carl9170_usb_restart(struct ar9170 *ar) |
| { |
| int err = 0; |
| |
| if (ar->intf->condition != USB_INTERFACE_BOUND) |
| return 0; |
| |
| /* |
| * Disable the command response sequence counter check. |
| * We already know that the device/firmware is in a bad state. |
| * So, no extra points are awarded to anyone who reminds the |
| * driver about that. |
| */ |
| ar->cmd_seq = -2; |
| |
| err = carl9170_reboot(ar); |
| |
| carl9170_usb_stop(ar); |
| |
| if (err) |
| goto err_out; |
| |
| tasklet_schedule(&ar->usb_tasklet); |
| |
| /* The reboot procedure can take quite a while to complete. */ |
| msleep(1100); |
| |
| err = carl9170_usb_open(ar); |
| if (err) |
| goto err_out; |
| |
| err = carl9170_usb_load_firmware(ar); |
| if (err) |
| goto err_out; |
| |
| return 0; |
| |
| err_out: |
| carl9170_usb_cancel_urbs(ar); |
| return err; |
| } |
| |
| void carl9170_usb_reset(struct ar9170 *ar) |
| { |
| /* |
| * This is the last resort to get the device going again |
| * without any *user replugging action*. |
| * |
| * But there is a catch: usb_reset really is like a physical |
| * *reconnect*. The mac80211 state will be lost in the process. |
| * Therefore a userspace application, which is monitoring |
| * the link must step in. |
| */ |
| carl9170_usb_cancel_urbs(ar); |
| |
| carl9170_usb_stop(ar); |
| |
| usb_queue_reset_device(ar->intf); |
| } |
| |
| static int carl9170_usb_init_device(struct ar9170 *ar) |
| { |
| int err; |
| |
| /* |
| * The carl9170 firmware let's the driver know when it's |
| * ready for action. But we have to be prepared to gracefully |
| * handle all spurious [flushed] messages after each (re-)boot. |
| * Thus the command response counter remains disabled until it |
| * can be safely synchronized. |
| */ |
| ar->cmd_seq = -2; |
| |
| err = carl9170_usb_send_rx_irq_urb(ar); |
| if (err) |
| goto err_out; |
| |
| err = carl9170_usb_init_rx_bulk_urbs(ar); |
| if (err) |
| goto err_unrx; |
| |
| err = carl9170_usb_open(ar); |
| if (err) |
| goto err_unrx; |
| |
| mutex_lock(&ar->mutex); |
| err = carl9170_usb_load_firmware(ar); |
| mutex_unlock(&ar->mutex); |
| if (err) |
| goto err_stop; |
| |
| return 0; |
| |
| err_stop: |
| carl9170_usb_stop(ar); |
| |
| err_unrx: |
| carl9170_usb_cancel_urbs(ar); |
| |
| err_out: |
| return err; |
| } |
| |
| static void carl9170_usb_firmware_failed(struct ar9170 *ar) |
| { |
| struct device *parent = ar->udev->dev.parent; |
| struct usb_device *udev; |
| |
| /* |
| * Store a copy of the usb_device pointer locally. |
| * This is because device_release_driver initiates |
| * carl9170_usb_disconnect, which in turn frees our |
| * driver context (ar). |
| */ |
| udev = ar->udev; |
| |
| complete(&ar->fw_load_wait); |
| |
| /* unbind anything failed */ |
| if (parent) |
| device_lock(parent); |
| |
| device_release_driver(&udev->dev); |
| if (parent) |
| device_unlock(parent); |
| |
| usb_put_dev(udev); |
| } |
| |
| static void carl9170_usb_firmware_finish(struct ar9170 *ar) |
| { |
| int err; |
| |
| err = carl9170_parse_firmware(ar); |
| if (err) |
| goto err_freefw; |
| |
| err = carl9170_usb_init_device(ar); |
| if (err) |
| goto err_freefw; |
| |
| err = carl9170_register(ar); |
| |
| carl9170_usb_stop(ar); |
| if (err) |
| goto err_unrx; |
| |
| complete(&ar->fw_load_wait); |
| usb_put_dev(ar->udev); |
| return; |
| |
| err_unrx: |
| carl9170_usb_cancel_urbs(ar); |
| |
| err_freefw: |
| carl9170_release_firmware(ar); |
| carl9170_usb_firmware_failed(ar); |
| } |
| |
| static void carl9170_usb_firmware_step2(const struct firmware *fw, |
| void *context) |
| { |
| struct ar9170 *ar = context; |
| |
| if (fw) { |
| ar->fw.fw = fw; |
| carl9170_usb_firmware_finish(ar); |
| return; |
| } |
| |
| dev_err(&ar->udev->dev, "firmware not found.\n"); |
| carl9170_usb_firmware_failed(ar); |
| } |
| |
| static int carl9170_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_endpoint_descriptor *ep; |
| struct ar9170 *ar; |
| struct usb_device *udev; |
| int i, err; |
| |
| err = usb_reset_device(interface_to_usbdev(intf)); |
| if (err) |
| return err; |
| |
| ar = carl9170_alloc(sizeof(*ar)); |
| if (IS_ERR(ar)) |
| return PTR_ERR(ar); |
| |
| udev = interface_to_usbdev(intf); |
| usb_get_dev(udev); |
| ar->udev = udev; |
| ar->intf = intf; |
| ar->features = id->driver_info; |
| |
| /* We need to remember the type of endpoint 4 because it differs |
| * between high- and full-speed configuration. The high-speed |
| * configuration specifies it as interrupt and the full-speed |
| * configuration as bulk endpoint. This information is required |
| * later when sending urbs to that endpoint. |
| */ |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) { |
| ep = &intf->cur_altsetting->endpoint[i].desc; |
| |
| if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD && |
| usb_endpoint_dir_out(ep) && |
| usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK) |
| ar->usb_ep_cmd_is_bulk = true; |
| } |
| |
| usb_set_intfdata(intf, ar); |
| SET_IEEE80211_DEV(ar->hw, &intf->dev); |
| |
| init_usb_anchor(&ar->rx_anch); |
| init_usb_anchor(&ar->rx_pool); |
| init_usb_anchor(&ar->rx_work); |
| init_usb_anchor(&ar->tx_wait); |
| init_usb_anchor(&ar->tx_anch); |
| init_usb_anchor(&ar->tx_cmd); |
| init_usb_anchor(&ar->tx_err); |
| init_completion(&ar->cmd_wait); |
| init_completion(&ar->fw_boot_wait); |
| init_completion(&ar->fw_load_wait); |
| tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet, |
| (unsigned long)ar); |
| |
| atomic_set(&ar->tx_cmd_urbs, 0); |
| atomic_set(&ar->tx_anch_urbs, 0); |
| atomic_set(&ar->rx_work_urbs, 0); |
| atomic_set(&ar->rx_anch_urbs, 0); |
| atomic_set(&ar->rx_pool_urbs, 0); |
| |
| usb_get_dev(ar->udev); |
| |
| carl9170_set_state(ar, CARL9170_STOPPED); |
| |
| err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, |
| &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); |
| if (err) { |
| usb_put_dev(udev); |
| usb_put_dev(udev); |
| carl9170_free(ar); |
| } |
| return err; |
| } |
| |
| static void carl9170_usb_disconnect(struct usb_interface *intf) |
| { |
| struct ar9170 *ar = usb_get_intfdata(intf); |
| struct usb_device *udev; |
| |
| if (WARN_ON(!ar)) |
| return; |
| |
| udev = ar->udev; |
| wait_for_completion(&ar->fw_load_wait); |
| |
| if (IS_INITIALIZED(ar)) { |
| carl9170_reboot(ar); |
| carl9170_usb_stop(ar); |
| } |
| |
| carl9170_usb_cancel_urbs(ar); |
| carl9170_unregister(ar); |
| |
| usb_set_intfdata(intf, NULL); |
| |
| carl9170_release_firmware(ar); |
| carl9170_free(ar); |
| usb_put_dev(udev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int carl9170_usb_suspend(struct usb_interface *intf, |
| pm_message_t message) |
| { |
| struct ar9170 *ar = usb_get_intfdata(intf); |
| |
| if (!ar) |
| return -ENODEV; |
| |
| carl9170_usb_cancel_urbs(ar); |
| |
| return 0; |
| } |
| |
| static int carl9170_usb_resume(struct usb_interface *intf) |
| { |
| struct ar9170 *ar = usb_get_intfdata(intf); |
| int err; |
| |
| if (!ar) |
| return -ENODEV; |
| |
| usb_unpoison_anchored_urbs(&ar->rx_anch); |
| carl9170_set_state(ar, CARL9170_STOPPED); |
| |
| /* |
| * The USB documentation demands that [for suspend] all traffic |
| * to and from the device has to stop. This would be fine, but |
| * there's a catch: the device[usb phy] does not come back. |
| * |
| * Upon resume the firmware will "kill" itself and the |
| * boot-code sorts out the magic voodoo. |
| * Not very nice, but there's not much what could go wrong. |
| */ |
| msleep(1100); |
| |
| err = carl9170_usb_init_device(ar); |
| if (err) |
| goto err_unrx; |
| |
| return 0; |
| |
| err_unrx: |
| carl9170_usb_cancel_urbs(ar); |
| |
| return err; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static struct usb_driver carl9170_driver = { |
| .name = KBUILD_MODNAME, |
| .probe = carl9170_usb_probe, |
| .disconnect = carl9170_usb_disconnect, |
| .id_table = carl9170_usb_ids, |
| .soft_unbind = 1, |
| #ifdef CONFIG_PM |
| .suspend = carl9170_usb_suspend, |
| .resume = carl9170_usb_resume, |
| .reset_resume = carl9170_usb_resume, |
| #endif /* CONFIG_PM */ |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,5,0)) |
| .disable_hub_initiated_lpm = 1, |
| #endif |
| }; |
| |
| module_usb_driver(carl9170_driver); |