include/linux/bcma/bcma_driver_pci.h - vendor/opensource/backports - Git at Google

 #ifndef LINUX_BCMA_DRIVER_PCI_H_
 #define LINUX_BCMA_DRIVER_PCI_H_

 #include <linux/types.h>

 struct pci_dev;

 /** PCI core registers. **/
 #define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
 #define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
 #define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
 #define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
 #define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
 #define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
 #define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
 #define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
 #define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
 #define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
 #define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
 #define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
 #define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
 #define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
 #define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
 #define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
 #define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
 #define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
 #define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
 #define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
 #define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
 #define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
 #define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
 #define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
 #define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
 #define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
 #define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
 #define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
 #define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
 #define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
 #define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
 #define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
 #define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
 #define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
 #define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
 #define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
 #define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
 #define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
 #define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
 #define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
 #define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
 #define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
 #define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
 #define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
 #define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
 #define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
 #define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
 #define BCMA_CORE_PCI_CONFIG_ADDR		0x0120	/* pcie config space access */
 #define BCMA_CORE_PCI_CONFIG_DATA		0x0124	/* pcie config space access */
 #define BCMA_CORE_PCI_MDIO_CONTROL		0x0128	/* controls the mdio access */
 #define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK	0x7f	/* clock to be used on MDIO */
 #define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL	0x2
 #define  BCMA_CORE_PCI_MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
 #define  BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE	0x100	/* Tranaction complete */
 #define BCMA_CORE_PCI_MDIO_DATA			0x012c	/* Data to the mdio access */
 #define  BCMA_CORE_PCI_MDIODATA_MASK		0x0000ffff /* data 2 bytes */
 #define  BCMA_CORE_PCI_MDIODATA_TA		0x00020000 /* Turnaround */
 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD	0x003c0000 /* Regaddr Mask (rev < 10) */
 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD	0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF	18	/* Regaddr shift */
 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK	0x007c0000 /* Regaddr Mask */
 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF	23	/* Physmedia devaddr shift */
 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK	0x0f800000 /* Physmedia devaddr Mask */
 #define  BCMA_CORE_PCI_MDIODATA_WRITE		0x10000000 /* write Transaction */
 #define  BCMA_CORE_PCI_MDIODATA_READ		0x20000000 /* Read Transaction */
 #define  BCMA_CORE_PCI_MDIODATA_START		0x40000000 /* start of Transaction */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_ADDR	0x0	/* dev address for serdes */
 #define  BCMA_CORE_PCI_MDIODATA_BLK_ADDR	0x1F	/* blk address for serdes */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_PLL		0x1d	/* SERDES PLL Dev */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
 #define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
 #define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
 #define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
 #define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
 #define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
 #define  BCMA_CORE_PCI_SPROM_PI_OFFSET		0	/* first word */
 #define   BCMA_CORE_PCI_SPROM_PI_MASK		0xf000	/* bit 15:12 */
 #define   BCMA_CORE_PCI_SPROM_PI_SHIFT		12	/* bit 15:12 */
 #define  BCMA_CORE_PCI_SPROM_MISC_CONFIG	5	/* word 5 */
 #define   BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
 #define   BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5	20	/* word 20 for srom rev <= 5 */
 #define   BCMA_CORE_PCI_SPROM_CLKREQ_ENB	0x0800	/* bit 11 */

 /* SBtoPCIx */
 #define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
 #define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
 #define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
 #define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
 #define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
 #define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
 #define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
 #define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
 #define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
 #define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
 #define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */

 /* PCIE protocol PHY diagnostic registers */
 #define BCMA_CORE_PCI_PLP_MODEREG		0x200	/* Mode */
 #define BCMA_CORE_PCI_PLP_STATUSREG		0x204	/* Status */
 #define  BCMA_CORE_PCI_PLP_POLARITYINV_STAT	0x10	/* Status reg PCIE_PLP_STATUSREG */
 #define BCMA_CORE_PCI_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
 #define BCMA_CORE_PCI_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
 #define BCMA_CORE_PCI_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
 #define BCMA_CORE_PCI_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
 #define BCMA_CORE_PCI_PLP_ATTNREG		0x218	/* Attention */
 #define BCMA_CORE_PCI_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
 #define BCMA_CORE_PCI_PLP_RXERRCTR		0x220	/* Rx Error */
 #define BCMA_CORE_PCI_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
 #define BCMA_CORE_PCI_PLP_RXERRTHRESHREG	0x228	/* Rx Error threshold */
 #define BCMA_CORE_PCI_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
 #define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
 #define BCMA_CORE_PCI_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
 #define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
 #define BCMA_CORE_PCI_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */

 /* PCIE protocol DLLP diagnostic registers */
 #define BCMA_CORE_PCI_DLLP_LCREG		0x100	/* Link Control */
 #define BCMA_CORE_PCI_DLLP_LSREG		0x104	/* Link Status */
 #define BCMA_CORE_PCI_DLLP_LAREG		0x108	/* Link Attention */
 #define  BCMA_CORE_PCI_DLLP_LSREG_LINKUP	(1 << 16)
 #define BCMA_CORE_PCI_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
 #define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
 #define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
 #define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
 #define BCMA_CORE_PCI_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
 #define BCMA_CORE_PCI_DLLP_LRREG		0x120	/* Link Replay */
 #define BCMA_CORE_PCI_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
 #define BCMA_CORE_PCI_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
 #define  BCMA_CORE_PCI_ASPMTIMER_EXTEND		0x01000000 /* > rev7: enable extend ASPM timer */
 #define BCMA_CORE_PCI_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
 #define BCMA_CORE_PCI_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
 #define BCMA_CORE_PCI_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
 #define BCMA_CORE_PCI_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
 #define BCMA_CORE_PCI_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
 #define BCMA_CORE_PCI_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
 #define BCMA_CORE_PCI_DLLP_ERRCTRREG		0x144	/* Error Counter */
 #define BCMA_CORE_PCI_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
 #define BCMA_CORE_PCI_DLLP_TESTREG		0x14C	/* Test */
 #define BCMA_CORE_PCI_DLLP_PKTBIST		0x150	/* Packet BIST */
 #define BCMA_CORE_PCI_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */

 /* SERDES RX registers */
 #define BCMA_CORE_PCI_SERDES_RX_CTRL		1	/* Rx cntrl */
 #define  BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE	0x80	/* rxpolarity_force */
 #define  BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY	0x40	/* rxpolarity_value */
 #define BCMA_CORE_PCI_SERDES_RX_TIMER1		2	/* Rx Timer1 */
 #define BCMA_CORE_PCI_SERDES_RX_CDR		6	/* CDR */
 #define BCMA_CORE_PCI_SERDES_RX_CDRBW		7	/* CDR BW */

 /* SERDES PLL registers */
 #define BCMA_CORE_PCI_SERDES_PLL_CTRL		1	/* PLL control reg */
 #define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN	0x4000	/* bit 14 is FREQDET on */

 /* PCIcore specific boardflags */
 #define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */

 /* PCIE Config space accessing MACROS */
 #define BCMA_CORE_PCI_CFG_BUS_SHIFT		24	/* Bus shift */
 #define BCMA_CORE_PCI_CFG_SLOT_SHIFT		19	/* Slot/Device shift */
 #define BCMA_CORE_PCI_CFG_FUN_SHIFT		16	/* Function shift */
 #define BCMA_CORE_PCI_CFG_OFF_SHIFT		0	/* Register shift */

 #define BCMA_CORE_PCI_CFG_BUS_MASK		0xff	/* Bus mask */
 #define BCMA_CORE_PCI_CFG_SLOT_MASK		0x1f	/* Slot/Device mask */
 #define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
 #define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */

 #define BCMA_CORE_PCI_CFG_DEVCTRL		0xd8

 #define BCMA_CORE_PCI_

 /* MDIO devices (SERDES modules) */
 #define BCMA_CORE_PCI_MDIO_IEEE0		0x000
 #define BCMA_CORE_PCI_MDIO_IEEE1		0x001
 #define BCMA_CORE_PCI_MDIO_BLK0			0x800
 #define BCMA_CORE_PCI_MDIO_BLK1			0x801
 #define  BCMA_CORE_PCI_MDIO_BLK1_MGMT0		0x16
 #define  BCMA_CORE_PCI_MDIO_BLK1_MGMT1		0x17
 #define  BCMA_CORE_PCI_MDIO_BLK1_MGMT2		0x18
 #define  BCMA_CORE_PCI_MDIO_BLK1_MGMT3		0x19
 #define  BCMA_CORE_PCI_MDIO_BLK1_MGMT4		0x1A
 #define BCMA_CORE_PCI_MDIO_BLK2			0x802
 #define BCMA_CORE_PCI_MDIO_BLK3			0x803
 #define BCMA_CORE_PCI_MDIO_BLK4			0x804
 #define BCMA_CORE_PCI_MDIO_TXPLL		0x808	/* TXPLL register block idx */
 #define BCMA_CORE_PCI_MDIO_TXCTRL0		0x820
 #define BCMA_CORE_PCI_MDIO_SERDESID		0x831
 #define BCMA_CORE_PCI_MDIO_RXCTRL0		0x840

 /* PCIE Root Capability Register bits (Host mode only) */
 #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001

 struct bcma_drv_pci;
 struct bcma_bus;

 #ifdef CPTCFG_BCMA_DRIVER_PCI_HOSTMODE
 struct bcma_drv_pci_host {
 	struct bcma_drv_pci *pdev;

 	u32 host_cfg_addr;
 	spinlock_t cfgspace_lock;

 	struct pci_controller pci_controller;
 	struct pci_ops pci_ops;
 	struct resource mem_resource;
 	struct resource io_resource;
 };
 #endif

 struct bcma_drv_pci {
 	struct bcma_device *core;
 	u8 early_setup_done:1;
 	u8 setup_done:1;
 	u8 hostmode:1;

 #ifdef CPTCFG_BCMA_DRIVER_PCI_HOSTMODE
 	struct bcma_drv_pci_host *host_controller;
 #endif
 };

 /* Register access */
 #define pcicore_read16(pc, offset)		bcma_read16((pc)->core, offset)
 #define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
 #define pcicore_write16(pc, offset, val)	bcma_write16((pc)->core, offset, val)
 #define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)

 #ifdef CPTCFG_BCMA_DRIVER_PCI
 extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
 #else
 static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
 {
 }
 #endif

 extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
 extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);

 #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
	#ifndef LINUX_BCMA_DRIVER_PCI_H_
	#define LINUX_BCMA_DRIVER_PCI_H_

	#include <linux/types.h>

	struct pci_dev;

	/ PCI core registers. /
	#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
	#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
	#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
	#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
	#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
	#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
	#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
	#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
	#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
	#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
	#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
	#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
	#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
	#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
	#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
	#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
	#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
	#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
	#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
	#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
	#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
	#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
	#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
	#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
	#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
	#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
	#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
	#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
	#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
	#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
	#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
	#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
	#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
	#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
	#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
	#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
	#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
	#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
	#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
	#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
	#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
	#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
	#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
	#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
	#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
	#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
	#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
	#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */
	#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */
	#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */
	#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
	#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2
	#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
	#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
	#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */
	#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */
	#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */
	#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */
	#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */
	#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */
	#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
	#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
	#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */
	#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */
	#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */
	#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */
	#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */
	#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */
	#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */
	#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */
	#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
	#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
	#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
	#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */
	#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */
	#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */
	#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
	#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
	#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
	#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
	#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
	#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */
	#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */
	#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */
	#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */
	#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */
	#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */
	#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */

	/* SBtoPCIx */
	#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
	#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
	#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
	#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
	#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
	#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
	#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
	#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
	#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
	#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
	#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */

	/* PCIE protocol PHY diagnostic registers */
	#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */
	#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */
	#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */
	#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
	#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */
	#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */
	#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
	#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */
	#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */
	#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */
	#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */
	#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
	#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */
	#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
	#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
	#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */
	#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */

	/* PCIE protocol DLLP diagnostic registers */
	#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */
	#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */
	#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */
	#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16)
	#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
	#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */
	#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */
	#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */
	#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
	#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */
	#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
	#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
	#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */
	#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
	#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
	#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
	#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */
	#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
	#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
	#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */
	#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */
	#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */
	#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */
	#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */

	/* SERDES RX registers */
	#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */
	#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */
	#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */
	#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */
	#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */
	#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */

	/* SERDES PLL registers */
	#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */
	#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */

	/* PCIcore specific boardflags */
	#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */

	/* PCIE Config space accessing MACROS */
	#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */
	#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */
	#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */
	#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */

	#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */
	#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */
	#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
	#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */

	#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8

	#define BCMA_CORE_PCI_

	/* MDIO devices (SERDES modules) */
	#define BCMA_CORE_PCI_MDIO_IEEE0 0x000
	#define BCMA_CORE_PCI_MDIO_IEEE1 0x001
	#define BCMA_CORE_PCI_MDIO_BLK0 0x800
	#define BCMA_CORE_PCI_MDIO_BLK1 0x801
	#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16
	#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17
	#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18
	#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19
	#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A
	#define BCMA_CORE_PCI_MDIO_BLK2 0x802
	#define BCMA_CORE_PCI_MDIO_BLK3 0x803
	#define BCMA_CORE_PCI_MDIO_BLK4 0x804
	#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */
	#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820
	#define BCMA_CORE_PCI_MDIO_SERDESID 0x831
	#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840

	/* PCIE Root Capability Register bits (Host mode only) */
	#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001

	struct bcma_drv_pci;
	struct bcma_bus;

	#ifdef CPTCFG_BCMA_DRIVER_PCI_HOSTMODE
	struct bcma_drv_pci_host {
	struct bcma_drv_pci *pdev;

	u32 host_cfg_addr;
	spinlock_t cfgspace_lock;

	struct pci_controller pci_controller;
	struct pci_ops pci_ops;
	struct resource mem_resource;
	struct resource io_resource;
	};
	#endif

	struct bcma_drv_pci {
	struct bcma_device *core;
	u8 early_setup_done:1;
	u8 setup_done:1;
	u8 hostmode:1;

	#ifdef CPTCFG_BCMA_DRIVER_PCI_HOSTMODE
	struct bcma_drv_pci_host *host_controller;
	#endif
	};

	/* Register access */
	#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset)
	#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
	#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
	#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)

	#ifdef CPTCFG_BCMA_DRIVER_PCI
	extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
	#else
	static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
	{
	}
	#endif

	extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
	extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);

	#endif /* LINUX_BCMA_DRIVER_PCI_H_ */