drivers/net/wireless/ath/wil6210/pcie_bus.c - vendor/opensource/backports - Git at Google

 /*
  * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/moduleparam.h>
 #include <linux/interrupt.h>

 #include "wil6210.h"

 static bool use_msi = true;
 module_param(use_msi, bool, S_IRUGO);
 MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");

 static
 void wil_set_capabilities(struct wil6210_priv *wil)
 {
 	u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);

 	bitmap_zero(wil->hw_capabilities, hw_capability_last);

 	switch (rev_id) {
 	case JTAG_DEV_ID_SPARROW_B0:
 		wil->hw_name = "Sparrow B0";
 		wil->hw_version = HW_VER_SPARROW_B0;
 		break;
 	default:
 		wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id);
 		wil->hw_name = "Unknown";
 		wil->hw_version = HW_VER_UNKNOWN;
 	}

 	wil_info(wil, "Board hardware is %s\n", wil->hw_name);
 }

 void wil_disable_irq(struct wil6210_priv *wil)
 {
 	disable_irq(wil->pdev->irq);
 }

 void wil_enable_irq(struct wil6210_priv *wil)
 {
 	enable_irq(wil->pdev->irq);
 }

 /* Bus ops */
 static int wil_if_pcie_enable(struct wil6210_priv *wil)
 {
 	struct pci_dev *pdev = wil->pdev;
 	int rc;
 	/* on platforms with buggy ACPI, pdev->msi_enabled may be set to
 	 * allow pci_enable_device to work. This indicates INTx was not routed
 	 * and only MSI should be used
 	 */
 	int msi_only = pdev->msi_enabled;
 	bool _use_msi = use_msi;

 	wil_dbg_misc(wil, "%s()\n", __func__);

 	pdev->msi_enabled = 0;

 	pci_set_master(pdev);

 	wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");

 	if (use_msi && pci_enable_msi(pdev)) {
 		wil_err(wil, "pci_enable_msi failed, use INTx\n");
 		_use_msi = false;
 	}

 	if (!_use_msi && msi_only) {
 		wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
 		rc = -ENODEV;
 		goto stop_master;
 	}

 	rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
 	if (rc)
 		goto stop_master;

 	/* need reset here to obtain MAC */
 	mutex_lock(&wil->mutex);
 	rc = wil_reset(wil, false);
 	mutex_unlock(&wil->mutex);
 	if (rc)
 		goto release_irq;

 	return 0;

  release_irq:
 	wil6210_fini_irq(wil, pdev->irq);
 	/* safe to call if no MSI */
 	pci_disable_msi(pdev);
  stop_master:
 	pci_clear_master(pdev);
 	return rc;
 }

 static int wil_if_pcie_disable(struct wil6210_priv *wil)
 {
 	struct pci_dev *pdev = wil->pdev;

 	wil_dbg_misc(wil, "%s()\n", __func__);

 	pci_clear_master(pdev);
 	/* disable and release IRQ */
 	wil6210_fini_irq(wil, pdev->irq);
 	/* safe to call if no MSI */
 	pci_disable_msi(pdev);
 	/* TODO: disable HW */

 	return 0;
 }

 static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size)
 {
 	struct wil6210_priv *wil = wil_handle;

 	if (!wil)
 		return -EINVAL;

 	return wil_fw_copy_crash_dump(wil, buf, size);
 }

 static int wil_platform_rop_fw_recovery(void *wil_handle)
 {
 	struct wil6210_priv *wil = wil_handle;

 	if (!wil)
 		return -EINVAL;

 	wil_fw_error_recovery(wil);

 	return 0;
 }

 static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct wil6210_priv *wil;
 	struct device *dev = &pdev->dev;
 	int rc;
 	const struct wil_platform_rops rops = {
 		.ramdump = wil_platform_rop_ramdump,
 		.fw_recovery = wil_platform_rop_fw_recovery,
 	};

 	/* check HW */
 	dev_info(&pdev->dev, WIL_NAME
 		 " device found [%04x:%04x] (rev %x)\n",
 		 (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);

 	if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
 		dev_err(&pdev->dev, "Not " WIL_NAME "? "
 			"BAR0 size is %lu while expecting %lu\n",
 			(ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
 		return -ENODEV;
 	}

 	wil = wil_if_alloc(dev);
 	if (IS_ERR(wil)) {
 		rc = (int)PTR_ERR(wil);
 		dev_err(dev, "wil_if_alloc failed: %d\n", rc);
 		return rc;
 	}
 	wil->pdev = pdev;
 	pci_set_drvdata(pdev, wil);
 	/* rollback to if_free */

 	wil->platform_handle =
 		wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
 	if (!wil->platform_handle) {
 		rc = -ENODEV;
 		wil_err(wil, "wil_platform_init failed\n");
 		goto if_free;
 	}
 	/* rollback to err_plat */

 	rc = pci_enable_device(pdev);
 	if (rc) {
 		wil_err(wil,
 			"pci_enable_device failed, retry with MSI only\n");
 		/* Work around for platforms that can't allocate IRQ:
 		 * retry with MSI only
 		 */
 		pdev->msi_enabled = 1;
 		rc = pci_enable_device(pdev);
 	}
 	if (rc) {
 		wil_err(wil,
 			"pci_enable_device failed, even with MSI only\n");
 		goto err_plat;
 	}
 	/* rollback to err_disable_pdev */

 	rc = pci_request_region(pdev, 0, WIL_NAME);
 	if (rc) {
 		wil_err(wil, "pci_request_region failed\n");
 		goto err_disable_pdev;
 	}
 	/* rollback to err_release_reg */

 	wil->csr = pci_ioremap_bar(pdev, 0);
 	if (!wil->csr) {
 		wil_err(wil, "pci_ioremap_bar failed\n");
 		rc = -ENODEV;
 		goto err_release_reg;
 	}
 	/* rollback to err_iounmap */
 	wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);

 	wil_set_capabilities(wil);
 	wil6210_clear_irq(wil);

 	/* FW should raise IRQ when ready */
 	rc = wil_if_pcie_enable(wil);
 	if (rc) {
 		wil_err(wil, "Enable device failed\n");
 		goto err_iounmap;
 	}
 	/* rollback to bus_disable */

 	rc = wil_if_add(wil);
 	if (rc) {
 		wil_err(wil, "wil_if_add failed: %d\n", rc);
 		goto bus_disable;
 	}

 	wil6210_debugfs_init(wil);


 	return 0;

 bus_disable:
 	wil_if_pcie_disable(wil);
 err_iounmap:
 	pci_iounmap(pdev, wil->csr);
 err_release_reg:
 	pci_release_region(pdev, 0);
 err_disable_pdev:
 	pci_disable_device(pdev);
 err_plat:
 	if (wil->platform_ops.uninit)
 		wil->platform_ops.uninit(wil->platform_handle);
 if_free:
 	wil_if_free(wil);

 	return rc;
 }

 static void wil_pcie_remove(struct pci_dev *pdev)
 {
 	struct wil6210_priv *wil = pci_get_drvdata(pdev);
 	void __iomem *csr = wil->csr;

 	wil_dbg_misc(wil, "%s()\n", __func__);

 	wil6210_debugfs_remove(wil);
 	wil_if_remove(wil);
 	wil_if_pcie_disable(wil);
 	pci_iounmap(pdev, csr);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
 	if (wil->platform_ops.uninit)
 		wil->platform_ops.uninit(wil->platform_handle);
 	wil_if_free(wil);
 }

 static const struct pci_device_id wil6210_pcie_ids[] = {
 	{ PCI_DEVICE(0x1ae9, 0x0310) },
 	{ PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
 	{ /* end: all zeroes */	},
 };
 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);

 #ifdef CONFIG_PM
 #ifdef CONFIG_PM_SLEEP

 static int wil6210_suspend(struct device *dev, bool is_runtime)
 {
 	int rc = 0;
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct wil6210_priv *wil = pci_get_drvdata(pdev);

 	wil_dbg_pm(wil, "%s(%s)\n", __func__,
 		   is_runtime ? "runtime" : "system");

 	rc = wil_can_suspend(wil, is_runtime);
 	if (rc)
 		goto out;

 	rc = wil_suspend(wil, is_runtime);
 	if (rc)
 		goto out;

 	/* TODO: how do I bring card in low power state? */

 	/* disable bus mastering */
 	pci_clear_master(pdev);
 	/* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */

 out:
 	return rc;
 }

 static int wil6210_resume(struct device *dev, bool is_runtime)
 {
 	int rc = 0;
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct wil6210_priv *wil = pci_get_drvdata(pdev);

 	wil_dbg_pm(wil, "%s(%s)\n", __func__,
 		   is_runtime ? "runtime" : "system");

 	/* allow master */
 	pci_set_master(pdev);

 	rc = wil_resume(wil, is_runtime);
 	if (rc)
 		pci_clear_master(pdev);

 	return rc;
 }

 static int wil6210_pm_suspend(struct device *dev)
 {
 	return wil6210_suspend(dev, false);
 }

 static int wil6210_pm_resume(struct device *dev)
 {
 	return wil6210_resume(dev, false);
 }
 #endif /* CONFIG_PM_SLEEP */

 #endif /* CONFIG_PM */

 static const struct dev_pm_ops wil6210_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
 };

 static struct pci_driver wil6210_driver = {
 	.probe		= wil_pcie_probe,
 	.remove		= wil_pcie_remove,
 	.id_table	= wil6210_pcie_ids,
 	.name		= WIL_NAME,
 	.driver		= {
 		.pm = &wil6210_pm_ops,
 	},
 };

 static int __init wil6210_driver_init(void)
 {
 	int rc;

 	rc = wil_platform_modinit();
 	if (rc)
 		return rc;

 	rc = pci_register_driver(&wil6210_driver);
 	if (rc)
 		wil_platform_modexit();
 	return rc;
 }
 module_init(wil6210_driver_init);

 static void __exit wil6210_driver_exit(void)
 {
 	pci_unregister_driver(&wil6210_driver);
 	wil_platform_modexit();
 }
 module_exit(wil6210_driver_exit);

 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");
	/*
	* Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/moduleparam.h>
	#include <linux/interrupt.h>

	#include "wil6210.h"

	static bool use_msi = true;
	module_param(use_msi, bool, S_IRUGO);
	MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");

	static
	void wil_set_capabilities(struct wil6210_priv *wil)
	{
	u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);

	bitmap_zero(wil->hw_capabilities, hw_capability_last);

	switch (rev_id) {
	case JTAG_DEV_ID_SPARROW_B0:
	wil->hw_name = "Sparrow B0";
	wil->hw_version = HW_VER_SPARROW_B0;
	break;
	default:
	wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id);
	wil->hw_name = "Unknown";
	wil->hw_version = HW_VER_UNKNOWN;
	}

	wil_info(wil, "Board hardware is %s\n", wil->hw_name);
	}

	void wil_disable_irq(struct wil6210_priv *wil)
	{
	disable_irq(wil->pdev->irq);
	}

	void wil_enable_irq(struct wil6210_priv *wil)
	{
	enable_irq(wil->pdev->irq);
	}

	/* Bus ops */
	static int wil_if_pcie_enable(struct wil6210_priv *wil)
	{
	struct pci_dev *pdev = wil->pdev;
	int rc;
	/* on platforms with buggy ACPI, pdev->msi_enabled may be set to
	* allow pci_enable_device to work. This indicates INTx was not routed
	* and only MSI should be used
	*/
	int msi_only = pdev->msi_enabled;
	bool _use_msi = use_msi;

	wil_dbg_misc(wil, "%s()\n", __func__);

	pdev->msi_enabled = 0;

	pci_set_master(pdev);

	wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");

	if (use_msi && pci_enable_msi(pdev)) {
	wil_err(wil, "pci_enable_msi failed, use INTx\n");
	_use_msi = false;
	}

	if (!_use_msi && msi_only) {
	wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
	rc = -ENODEV;
	goto stop_master;
	}

	rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
	if (rc)
	goto stop_master;

	/* need reset here to obtain MAC */
	mutex_lock(&wil->mutex);
	rc = wil_reset(wil, false);
	mutex_unlock(&wil->mutex);
	if (rc)
	goto release_irq;

	return 0;

	release_irq:
	wil6210_fini_irq(wil, pdev->irq);
	/* safe to call if no MSI */
	pci_disable_msi(pdev);
	stop_master:
	pci_clear_master(pdev);
	return rc;
	}

	static int wil_if_pcie_disable(struct wil6210_priv *wil)
	{
	struct pci_dev *pdev = wil->pdev;

	wil_dbg_misc(wil, "%s()\n", __func__);

	pci_clear_master(pdev);
	/* disable and release IRQ */
	wil6210_fini_irq(wil, pdev->irq);
	/* safe to call if no MSI */
	pci_disable_msi(pdev);
	/* TODO: disable HW */

	return 0;
	}

	static int wil_platform_rop_ramdump(void wil_handle, void buf, uint32_t size)
	{
	struct wil6210_priv *wil = wil_handle;

	if (!wil)
	return -EINVAL;

	return wil_fw_copy_crash_dump(wil, buf, size);
	}

	static int wil_platform_rop_fw_recovery(void *wil_handle)
	{
	struct wil6210_priv *wil = wil_handle;

	if (!wil)
	return -EINVAL;

	wil_fw_error_recovery(wil);

	return 0;
	}

	static int wil_pcie_probe(struct pci_dev pdev, const struct pci_device_id id)
	{
	struct wil6210_priv *wil;
	struct device *dev = &pdev->dev;
	int rc;
	const struct wil_platform_rops rops = {
	.ramdump = wil_platform_rop_ramdump,
	.fw_recovery = wil_platform_rop_fw_recovery,
	};

	/* check HW */
	dev_info(&pdev->dev, WIL_NAME
	" device found [%04x:%04x] (rev %x)\n",
	(int)pdev->vendor, (int)pdev->device, (int)pdev->revision);

	if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
	dev_err(&pdev->dev, "Not " WIL_NAME "? "
	"BAR0 size is %lu while expecting %lu\n",
	(ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
	return -ENODEV;
	}

	wil = wil_if_alloc(dev);
	if (IS_ERR(wil)) {
	rc = (int)PTR_ERR(wil);
	dev_err(dev, "wil_if_alloc failed: %d\n", rc);
	return rc;
	}
	wil->pdev = pdev;
	pci_set_drvdata(pdev, wil);
	/* rollback to if_free */

	wil->platform_handle =
	wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
	if (!wil->platform_handle) {
	rc = -ENODEV;
	wil_err(wil, "wil_platform_init failed\n");
	goto if_free;
	}
	/* rollback to err_plat */

	rc = pci_enable_device(pdev);
	if (rc) {
	wil_err(wil,
	"pci_enable_device failed, retry with MSI only\n");
	/* Work around for platforms that can't allocate IRQ:
	* retry with MSI only
	*/
	pdev->msi_enabled = 1;
	rc = pci_enable_device(pdev);
	}
	if (rc) {
	wil_err(wil,
	"pci_enable_device failed, even with MSI only\n");
	goto err_plat;
	}
	/* rollback to err_disable_pdev */

	rc = pci_request_region(pdev, 0, WIL_NAME);
	if (rc) {
	wil_err(wil, "pci_request_region failed\n");
	goto err_disable_pdev;
	}
	/* rollback to err_release_reg */

	wil->csr = pci_ioremap_bar(pdev, 0);
	if (!wil->csr) {
	wil_err(wil, "pci_ioremap_bar failed\n");
	rc = -ENODEV;
	goto err_release_reg;
	}
	/* rollback to err_iounmap */
	wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);

	wil_set_capabilities(wil);
	wil6210_clear_irq(wil);

	/* FW should raise IRQ when ready */
	rc = wil_if_pcie_enable(wil);
	if (rc) {
	wil_err(wil, "Enable device failed\n");
	goto err_iounmap;
	}
	/* rollback to bus_disable */

	rc = wil_if_add(wil);
	if (rc) {
	wil_err(wil, "wil_if_add failed: %d\n", rc);
	goto bus_disable;
	}

	wil6210_debugfs_init(wil);


	return 0;

	bus_disable:
	wil_if_pcie_disable(wil);
	err_iounmap:
	pci_iounmap(pdev, wil->csr);
	err_release_reg:
	pci_release_region(pdev, 0);
	err_disable_pdev:
	pci_disable_device(pdev);
	err_plat:
	if (wil->platform_ops.uninit)
	wil->platform_ops.uninit(wil->platform_handle);
	if_free:
	wil_if_free(wil);

	return rc;
	}

	static void wil_pcie_remove(struct pci_dev *pdev)
	{
	struct wil6210_priv *wil = pci_get_drvdata(pdev);
	void __iomem *csr = wil->csr;

	wil_dbg_misc(wil, "%s()\n", __func__);

	wil6210_debugfs_remove(wil);
	wil_if_remove(wil);
	wil_if_pcie_disable(wil);
	pci_iounmap(pdev, csr);
	pci_release_region(pdev, 0);
	pci_disable_device(pdev);
	if (wil->platform_ops.uninit)
	wil->platform_ops.uninit(wil->platform_handle);
	wil_if_free(wil);
	}

	static const struct pci_device_id wil6210_pcie_ids[] = {
	{ PCI_DEVICE(0x1ae9, 0x0310) },
	{ PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
	{ /* end: all zeroes */ },
	};
	MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);

	#ifdef CONFIG_PM
	#ifdef CONFIG_PM_SLEEP

	static int wil6210_suspend(struct device *dev, bool is_runtime)
	{
	int rc = 0;
	struct pci_dev *pdev = to_pci_dev(dev);
	struct wil6210_priv *wil = pci_get_drvdata(pdev);

	wil_dbg_pm(wil, "%s(%s)\n", __func__,
	is_runtime ? "runtime" : "system");

	rc = wil_can_suspend(wil, is_runtime);
	if (rc)
	goto out;

	rc = wil_suspend(wil, is_runtime);
	if (rc)
	goto out;

	/* TODO: how do I bring card in low power state? */

	/* disable bus mastering */
	pci_clear_master(pdev);
	/* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */

	out:
	return rc;
	}

	static int wil6210_resume(struct device *dev, bool is_runtime)
	{
	int rc = 0;
	struct pci_dev *pdev = to_pci_dev(dev);
	struct wil6210_priv *wil = pci_get_drvdata(pdev);

	wil_dbg_pm(wil, "%s(%s)\n", __func__,
	is_runtime ? "runtime" : "system");

	/* allow master */
	pci_set_master(pdev);

	rc = wil_resume(wil, is_runtime);
	if (rc)
	pci_clear_master(pdev);

	return rc;
	}

	static int wil6210_pm_suspend(struct device *dev)
	{
	return wil6210_suspend(dev, false);
	}

	static int wil6210_pm_resume(struct device *dev)
	{
	return wil6210_resume(dev, false);
	}
	#endif /* CONFIG_PM_SLEEP */

	#endif /* CONFIG_PM */

	static const struct dev_pm_ops wil6210_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
	};

	static struct pci_driver wil6210_driver = {
	.probe = wil_pcie_probe,
	.remove = wil_pcie_remove,
	.id_table = wil6210_pcie_ids,
	.name = WIL_NAME,
	.driver = {
	.pm = &wil6210_pm_ops,
	},
	};

	static int __init wil6210_driver_init(void)
	{
	int rc;

	rc = wil_platform_modinit();
	if (rc)
	return rc;

	rc = pci_register_driver(&wil6210_driver);
	if (rc)
	wil_platform_modexit();
	return rc;
	}
	module_init(wil6210_driver_init);

	static void __exit wil6210_driver_exit(void)
	{
	pci_unregister_driver(&wil6210_driver);
	wil_platform_modexit();
	}
	module_exit(wil6210_driver_exit);

	MODULE_LICENSE("Dual BSD/GPL");
	MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
	MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");