| /* |
| * Copyright (C) 2010 Texas Instruments Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #ifndef _VPBE_TYPES_H |
| #define _VPBE_TYPES_H |
| |
| enum vpbe_version { |
| VPBE_VERSION_1 = 1, |
| VPBE_VERSION_2, |
| VPBE_VERSION_3, |
| }; |
| |
| /* vpbe_timing_type - Timing types used in vpbe device */ |
| enum vpbe_enc_timings_type { |
| VPBE_ENC_STD = 0x1, |
| VPBE_ENC_DV_TIMINGS = 0x4, |
| /* Used when set timings through FB device interface */ |
| VPBE_ENC_TIMINGS_INVALID = 0x8, |
| }; |
| |
| /* |
| * struct vpbe_enc_mode_info |
| * @name: ptr to name string of the standard, "NTSC", "PAL" etc |
| * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard |
| * @interlaced: 1 - interlaced, 0 - non interlaced/progressive |
| * @xres: x or horizontal resolution of the display |
| * @yres: y or vertical resolution of the display |
| * @fps: frame per second |
| * @left_margin: left margin of the display |
| * @right_margin: right margin of the display |
| * @upper_margin: upper margin of the display |
| * @lower_margin: lower margin of the display |
| * @hsync_len: h-sync length |
| * @vsync_len: v-sync length |
| * @flags: bit field: bit usage is documented below |
| * |
| * Description: |
| * Structure holding timing and resolution information of a standard. |
| * Used by vpbe_device to set required non-standard timing in the |
| * venc when lcd controller output is connected to a external encoder. |
| * A table of timings is maintained in vpbe device to set this in |
| * venc when external encoder is connected to lcd controller output. |
| * Encoder may provide a g_dv_timings() API to override these values |
| * as needed. |
| * |
| * Notes |
| * ------ |
| * if_type should be used only by encoder manager and encoder. |
| * flags usage |
| * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive |
| * b1 - vsync polarity, 0 - negative, 1 - positive |
| * b2 - field id polarity, 0 - negative, 1 - positive |
| */ |
| struct vpbe_enc_mode_info { |
| unsigned char *name; |
| enum vpbe_enc_timings_type timings_type; |
| v4l2_std_id std_id; |
| struct v4l2_dv_timings dv_timings; |
| unsigned int interlaced; |
| unsigned int xres; |
| unsigned int yres; |
| struct v4l2_fract aspect; |
| struct v4l2_fract fps; |
| unsigned int left_margin; |
| unsigned int right_margin; |
| unsigned int upper_margin; |
| unsigned int lower_margin; |
| unsigned int hsync_len; |
| unsigned int vsync_len; |
| unsigned int flags; |
| }; |
| |
| #endif |
