drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h

/*
 * Copyright (c) 2010 Broadcom Corporation
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef _BRCM_MAIN_H_
#define _BRCM_MAIN_H_

#include <linux/etherdevice.h>

#include <brcmu_utils.h>
#include "types.h"
#include "d11.h"
#include "scb.h"

#define	INVCHANNEL		255	/* invalid channel */

/* max # brcms_c_module_register() calls */
#define BRCMS_MAXMODULES	22

#define SEQNUM_SHIFT		4
#define SEQNUM_MAX		0x1000

#define NTXRATE			64	/* # tx MPDUs rate is reported for */

/* Maximum wait time for a MAC suspend */
/* uS: 83mS is max packet time (64KB ampdu @ 6Mbps) */
#define	BRCMS_MAX_MAC_SUSPEND	83000

/* responses for probe requests older that this are tossed, zero to disable */
#define BRCMS_PRB_RESP_TIMEOUT	0	/* Disable probe response timeout */

/* transmit buffer max headroom for protocol headers */
#define TXOFF (D11_TXH_LEN + D11_PHY_HDR_LEN)

/* Macros for doing definition and get/set of bitfields
 * Usage example, e.g. a three-bit field (bits 4-6):
 *    #define <NAME>_M	BITFIELD_MASK(3)
 *    #define <NAME>_S	4
 * ...
 *    regval = R_REG(osh, &regs->regfoo);
 *    field = GFIELD(regval, <NAME>);
 *    regval = SFIELD(regval, <NAME>, 1);
 *    W_REG(osh, &regs->regfoo, regval);
 */
#define BITFIELD_MASK(width) \
		(((unsigned)1 << (width)) - 1)
#define GFIELD(val, field) \
		(((val) >> field ## _S) & field ## _M)
#define SFIELD(val, field, bits) \
		(((val) & (~(field ## _M << field ## _S))) | \
		 ((unsigned)(bits) << field ## _S))

#define	SW_TIMER_MAC_STAT_UPD		30	/* periodic MAC stats update */

/* max # supported core revisions (0 .. MAXCOREREV - 1) */
#define	MAXCOREREV		28

/* Double check that unsupported cores are not enabled */
#if CONF_MSK(D11CONF, 0x4f) || CONF_GE(D11CONF, MAXCOREREV)
#error "Configuration for D11CONF includes unsupported versions."
#endif				/* Bad versions */

/* values for shortslot_override */
#define BRCMS_SHORTSLOT_AUTO	-1 /* Driver will manage Shortslot setting */
#define BRCMS_SHORTSLOT_OFF	0  /* Turn off short slot */
#define BRCMS_SHORTSLOT_ON	1  /* Turn on short slot */

/* value for short/long and mixmode/greenfield preamble */
#define BRCMS_LONG_PREAMBLE	(0)
#define BRCMS_SHORT_PREAMBLE	(1 << 0)
#define BRCMS_GF_PREAMBLE		(1 << 1)
#define BRCMS_MM_PREAMBLE		(1 << 2)
#define BRCMS_IS_MIMO_PREAMBLE(_pre) (((_pre) == BRCMS_GF_PREAMBLE) || \
				      ((_pre) == BRCMS_MM_PREAMBLE))

/* TxFrameID */
/* seq and frag bits: SEQNUM_SHIFT, FRAGNUM_MASK (802.11.h) */
/* rate epoch bits: TXFID_RATE_SHIFT, TXFID_RATE_MASK ((wlc_rate.c) */
#define TXFID_QUEUE_MASK	0x0007	/* Bits 0-2 */
#define TXFID_SEQ_MASK		0x7FE0	/* Bits 5-15 */
#define TXFID_SEQ_SHIFT		5	/* Number of bit shifts */
#define	TXFID_RATE_PROBE_MASK	0x8000	/* Bit 15 for rate probe */
#define TXFID_RATE_MASK		0x0018	/* Mask for bits 3 and 4 */
#define TXFID_RATE_SHIFT	3	/* Shift 3 bits for rate mask */

/* promote boardrev */
#define BOARDREV_PROMOTABLE	0xFF	/* from */
#define BOARDREV_PROMOTED	1	/* to */

#define DATA_BLOCK_TX_SUPR	(1 << 4)

/* Ucode MCTL_WAKE override bits */
#define BRCMS_WAKE_OVERRIDE_CLKCTL	0x01
#define BRCMS_WAKE_OVERRIDE_PHYREG	0x02
#define BRCMS_WAKE_OVERRIDE_MACSUSPEND	0x04
#define BRCMS_WAKE_OVERRIDE_TXFIFO	0x08
#define BRCMS_WAKE_OVERRIDE_FORCEFAST	0x10

/* stuff pulled in from wlc.c */

/* Interrupt bit error summary.  Don't include I_RU: we refill DMA at other
 * times; and if we run out, constant I_RU interrupts may cause lockup.  We
 * will still get error counts from rx0ovfl.
 */
#define	I_ERRORS	(I_PC | I_PD | I_DE | I_RO | I_XU)
/* default software intmasks */
#define	DEF_RXINTMASK	(I_RI)	/* enable rx int on rxfifo only */
#define	DEF_MACINTMASK	(MI_TXSTOP | MI_TBTT | MI_ATIMWINEND | MI_PMQ | \
			 MI_PHYTXERR | MI_DMAINT | MI_TFS | MI_BG_NOISE | \
			 MI_CCA | MI_TO | MI_GP0 | MI_RFDISABLE | MI_PWRUP)

#define	MAXTXPKTS		6	/* max # pkts pending */

/* frameburst */
#define	MAXTXFRAMEBURST		8 /* vanilla xpress mode: max frames/burst */
#define	MAXFRAMEBURST_TXOP	10000	/* Frameburst TXOP in usec */

#define	NFIFO			6	/* # tx/rx fifopairs */

/* PLL requests */

/* pll is shared on old chips */
#define BRCMS_PLLREQ_SHARED	0x1
/* hold pll for radio monitor register checking */
#define BRCMS_PLLREQ_RADIO_MON	0x2
/* hold/release pll for some short operation */
#define BRCMS_PLLREQ_FLIP		0x4

#define	CHANNEL_BANDUNIT(wlc, ch) \
	(((ch) <= CH_MAX_2G_CHANNEL) ? BAND_2G_INDEX : BAND_5G_INDEX)

#define	OTHERBANDUNIT(wlc) \
	((uint)((wlc)->band->bandunit ? BAND_2G_INDEX : BAND_5G_INDEX))

/*
 * 802.11 protection information
 *
 * _g: use g spec protection, driver internal.
 * g_override: override for use of g spec protection.
 * gmode_user: user config gmode, operating band->gmode is different.
 * overlap: Overlap BSS/IBSS protection for both 11g and 11n.
 * nmode_user: user config nmode, operating pub->nmode is different.
 * n_cfg: use OFDM protection on MIMO frames.
 * n_cfg_override: override for use of N protection.
 * nongf: non-GF present protection.
 * nongf_override: override for use of GF protection.
 * n_pam_override: override for preamble: MM or GF.
 * n_obss: indicated OBSS Non-HT STA present.
*/
struct brcms_protection {
	bool _g;
	s8 g_override;
	u8 gmode_user;
	s8 overlap;
	s8 nmode_user;
	s8 n_cfg;
	s8 n_cfg_override;
	bool nongf;
	s8 nongf_override;
	s8 n_pam_override;
	bool n_obss;
};

/*
 * anything affecting the single/dual streams/antenna operation
 *
 * hw_txchain: HW txchain bitmap cfg.
 * txchain: txchain bitmap being used.
 * txstreams: number of txchains being used.
 * hw_rxchain: HW rxchain bitmap cfg.
 * rxchain: rxchain bitmap being used.
 * rxstreams: number of rxchains being used.
 * ant_rx_ovr: rx antenna override.
 * txant: userTx antenna setting.
 * phytxant: phyTx antenna setting in txheader.
 * ss_opmode: singlestream Operational mode, 0:siso; 1:cdd.
 * ss_algosel_auto: if true, use wlc->stf->ss_algo_channel;
 *			else use wlc->band->stf->ss_mode_band.
 * ss_algo_channel: ss based on per-channel algo: 0: SISO, 1: CDD 2: STBC.
 * rxchain_restore_delay: delay time to restore default rxchain.
 * ldpc: AUTO/ON/OFF ldpc cap supported.
 * txcore[MAX_STREAMS_SUPPORTED + 1]: bitmap of selected core for each Nsts.
 * spatial_policy:
 */
struct brcms_stf {
	u8 hw_txchain;
	u8 txchain;
	u8 txstreams;
	u8 hw_rxchain;
	u8 rxchain;
	u8 rxstreams;
	u8 ant_rx_ovr;
	s8 txant;
	u16 phytxant;
	u8 ss_opmode;
	bool ss_algosel_auto;
	u16 ss_algo_channel;
	u8 rxchain_restore_delay;
	s8 ldpc;
	u8 txcore[MAX_STREAMS_SUPPORTED + 1];
	s8 spatial_policy;
};

#define BRCMS_STF_SS_STBC_TX(wlc, scb) \
	(((wlc)->stf->txstreams > 1) && (((wlc)->band->band_stf_stbc_tx == ON) \
	 || (((scb)->flags & SCB_STBCCAP) && \
	     (wlc)->band->band_stf_stbc_tx == AUTO && \
	     isset(&((wlc)->stf->ss_algo_channel), PHY_TXC1_MODE_STBC))))

#define BRCMS_STBC_CAP_PHY(wlc) (BRCMS_ISNPHY(wlc->band) && \
				 NREV_GE(wlc->band->phyrev, 3))

#define BRCMS_SGI_CAP_PHY(wlc) ((BRCMS_ISNPHY(wlc->band) && \
				 NREV_GE(wlc->band->phyrev, 3)) || \
				BRCMS_ISLCNPHY(wlc->band))

#define BRCMS_CHAN_PHYTYPE(x)     (((x) & RXS_CHAN_PHYTYPE_MASK) \
				   >> RXS_CHAN_PHYTYPE_SHIFT)
#define BRCMS_CHAN_CHANNEL(x)     (((x) & RXS_CHAN_ID_MASK) \
				   >> RXS_CHAN_ID_SHIFT)

/*
 * core state (mac)
 */
struct brcms_core {
	uint coreidx;		/* # sb enumerated core */

	/* fifo */
	uint *txavail[NFIFO];	/* # tx descriptors available */

	struct macstat *macstat_snapshot;	/* mac hw prev read values */
};

/*
 * band state (phy+ana+radio)
 */
struct brcms_band {
	int bandtype;		/* BRCM_BAND_2G, BRCM_BAND_5G */
	uint bandunit;		/* bandstate[] index */

	u16 phytype;		/* phytype */
	u16 phyrev;
	u16 radioid;
	u16 radiorev;
	struct brcms_phy_pub *pi; /* pointer to phy specific information */
	bool abgphy_encore;

	u8 gmode;		/* currently active gmode */

	struct scb *hwrs_scb;	/* permanent scb for hw rateset */

	/* band-specific copy of default_bss.rateset */
	struct brcms_c_rateset defrateset;

	u8 band_stf_ss_mode;	/* Configured STF type, 0:siso; 1:cdd */
	s8 band_stf_stbc_tx;	/* STBC TX 0:off; 1:force on; -1:auto */
	/* rates supported by chip (phy-specific) */
	struct brcms_c_rateset hw_rateset;
	u8 basic_rate[BRCM_MAXRATE + 1]; /* basic rates indexed by rate */
	bool mimo_cap_40;	/* 40 MHz cap enabled on this band */
	s8 antgain;		/* antenna gain from srom */

	u16 CWmin; /* minimum size of contention window, in unit of aSlotTime */
	u16 CWmax; /* maximum size of contention window, in unit of aSlotTime */
	struct ieee80211_supported_band band;
};

/* module control blocks */
struct modulecb {
	/* module name : NULL indicates empty array member */
	char name[32];
	/* handle passed when handler 'doiovar' is called */
	struct brcms_info *hdl;

	int (*down_fn)(void *handle); /* down handler. Note: the int returned
				       * by the down function is a count of the
				       * number of timers that could not be
				       * freed.
				       */

};

struct brcms_hw_band {
	int bandtype;		/* BRCM_BAND_2G, BRCM_BAND_5G */
	uint bandunit;		/* bandstate[] index */
	u16 mhfs[MHFMAX];	/* MHF array shadow */
	u8 bandhw_stf_ss_mode;	/* HW configured STF type, 0:siso; 1:cdd */
	u16 CWmin;
	u16 CWmax;
	u32 core_flags;

	u16 phytype;		/* phytype */
	u16 phyrev;
	u16 radioid;
	u16 radiorev;
	struct brcms_phy_pub *pi; /* pointer to phy specific information */
	bool abgphy_encore;
};

struct brcms_hardware {
	bool _piomode;		/* true if pio mode */
	struct brcms_c_info *wlc;

	/* fifo */
	struct dma_pub *di[NFIFO];	/* dma handles, per fifo */

	uint unit;		/* device instance number */

	/* version info */
	u16 vendorid;	/* PCI vendor id */
	u16 deviceid;	/* PCI device id */
	uint corerev;		/* core revision */
	u8 sromrev;		/* version # of the srom */
	u16 boardrev;	/* version # of particular board */
	u32 boardflags;	/* Board specific flags from srom */
	u32 boardflags2;	/* More board flags if sromrev >= 4 */
	u32 machwcap;	/* MAC capabilities */
	u32 machwcap_backup;	/* backup of machwcap */

	struct si_pub *sih;	/* SI handle (cookie for siutils calls) */
	struct bcma_device *d11core;	/* pointer to 802.11 core */
	struct phy_shim_info *physhim; /* phy shim layer handler */
	struct shared_phy *phy_sh;	/* pointer to shared phy state */
	struct brcms_hw_band *band;/* pointer to active per-band state */
	/* band state per phy/radio */
	struct brcms_hw_band *bandstate[MAXBANDS];
	u16 bmac_phytxant;	/* cache of high phytxant state */
	bool shortslot;		/* currently using 11g ShortSlot timing */
	u16 SRL;		/* 802.11 dot11ShortRetryLimit */
	u16 LRL;		/* 802.11 dot11LongRetryLimit */
	u16 SFBL;		/* Short Frame Rate Fallback Limit */
	u16 LFBL;		/* Long Frame Rate Fallback Limit */

	bool up;		/* d11 hardware up and running */
	uint now;		/* # elapsed seconds */
	uint _nbands;		/* # bands supported */
	u16 chanspec;	/* bmac chanspec shadow */

	uint *txavail[NFIFO];	/* # tx descriptors available */
	const u16 *xmtfifo_sz;	/* fifo size in 256B for each xmt fifo */

	u32 pllreq;		/* pll requests to keep PLL on */

	u8 suspended_fifos;	/* Which TX fifo to remain awake for */
	u32 maccontrol;	/* Cached value of maccontrol */
	uint mac_suspend_depth;	/* current depth of mac_suspend levels */
	u32 wake_override;	/* bit flags to force MAC to WAKE mode */
	u32 mute_override;	/* Prevent ucode from sending beacons */
	u8 etheraddr[ETH_ALEN];	/* currently configured ethernet address */
	bool noreset;		/* true= do not reset hw, used by WLC_OUT */
	bool forcefastclk;	/* true if h/w is forcing to use fast clk */
	bool clk;		/* core is out of reset and has clock */
	bool sbclk;		/* sb has clock */
	bool phyclk;		/* phy is out of reset and has clock */

	bool ucode_loaded;	/* true after ucode downloaded */


	u8 hw_stf_ss_opmode;	/* STF single stream operation mode */
	u8 antsel_type;	/* Type of boardlevel mimo antenna switch-logic
				 * 0 = N/A, 1 = 2x4 board, 2 = 2x3 CB2 board
				 */
	u32 antsel_avail;	/*
				 * put struct antsel_info here if more info is
				 * needed
				 */
};

/*
 * Principal common driver data structure.
 *
 * pub: pointer to driver public state.
 * wl: pointer to specific private state.
 * hw: HW related state.
 * clkreq_override: setting for clkreq for PCIE : Auto, 0, 1.
 * fastpwrup_dly: time in us needed to bring up d11 fast clock.
 * macintstatus: bit channel between isr and dpc.
 * macintmask: sw runtime master macintmask value.
 * defmacintmask: default "on" macintmask value.
 * clk: core is out of reset and has clock.
 * core: pointer to active io core.
 * band: pointer to active per-band state.
 * corestate: per-core state (one per hw core).
 * bandstate: per-band state (one per phy/radio).
 * qvalid: DirFrmQValid and BcMcFrmQValid.
 * ampdu: ampdu module handler.
 * asi: antsel module handler.
 * cmi: channel manager module handler.
 * vendorid: PCI vendor id.
 * deviceid: PCI device id.
 * ucode_rev: microcode revision.
 * machwcap: MAC capabilities, BMAC shadow.
 * perm_etheraddr: original sprom local ethernet address.
 * bandlocked: disable auto multi-band switching.
 * bandinit_pending: track band init in auto band.
 * radio_monitor: radio timer is running.
 * going_down: down path intermediate variable.
 * wdtimer: timer for watchdog routine.
 * radio_timer: timer for hw radio button monitor routine.
 * monitor: monitor (MPDU sniffing) mode.
 * bcnmisc_monitor: bcns promisc mode override for monitor.
 * _rifs: enable per-packet rifs.
 * bcn_li_bcn: beacon listen interval in # beacons.
 * bcn_li_dtim: beacon listen interval in # dtims.
 * WDarmed: watchdog timer is armed.
 * WDlast: last time wlc_watchdog() was called.
 * edcf_txop[IEEE80211_NUM_ACS]: current txop for each ac.
 * wme_retries: per-AC retry limits.
 * bsscfg: set of BSS configurations, idx 0 is default and always valid.
 * cfg: the primary bsscfg (can be AP or STA).
 * modulecb:
 * mimoft: SIGN or 11N.
 * cck_40txbw: 11N, cck tx b/w override when in 40MHZ mode.
 * ofdm_40txbw: 11N, ofdm tx b/w override when in 40MHZ mode.
 * mimo_40txbw: 11N, mimo tx b/w override when in 40MHZ mode.
 * default_bss: configured BSS parameters.
 * mc_fid_counter: BC/MC FIFO frame ID counter.
 * country_default: saved country for leaving 802.11d auto-country mode.
 * autocountry_default: initial country for 802.11d auto-country mode.
 * prb_resp_timeout: do not send prb resp if request older
 *		     than this, 0 = disable.
 * home_chanspec: shared home chanspec.
 * chanspec: target operational channel.
 * usr_fragthresh: user configured fragmentation threshold.
 * fragthresh[NFIFO]: per-fifo fragmentation thresholds.
 * RTSThresh: 802.11 dot11RTSThreshold.
 * SRL: 802.11 dot11ShortRetryLimit.
 * LRL: 802.11 dot11LongRetryLimit.
 * SFBL: Short Frame Rate Fallback Limit.
 * LFBL: Long Frame Rate Fallback Limit.
 * shortslot: currently using 11g ShortSlot timing.
 * shortslot_override: 11g ShortSlot override.
 * include_legacy_erp: include Legacy ERP info elt ID 47 as well as g ID 42.
 * PLCPHdr_override: 802.11b Preamble Type override.
 * stf:
 * bcn_rspec: save bcn ratespec purpose.
 * tempsense_lasttime;
 * tx_duty_cycle_ofdm: maximum allowed duty cycle for OFDM.
 * tx_duty_cycle_cck: maximum allowed duty cycle for CCK.
 * wiphy:
 * pri_scb: primary Station Control Block
 */
struct brcms_c_info {
	struct brcms_pub *pub;
	struct brcms_info *wl;
	struct brcms_hardware *hw;

	/* clock */
	u16 fastpwrup_dly;

	/* interrupt */
	u32 macintstatus;
	u32 macintmask;
	u32 defmacintmask;

	bool clk;

	/* multiband */
	struct brcms_core *core;
	struct brcms_band *band;
	struct brcms_core *corestate;
	struct brcms_band *bandstate[MAXBANDS];

	/* packet queue */
	uint qvalid;

	struct ampdu_info *ampdu;
	struct antsel_info *asi;
	struct brcms_cm_info *cmi;

	u16 vendorid;
	u16 deviceid;
	uint ucode_rev;

	u8 perm_etheraddr[ETH_ALEN];

	bool bandlocked;
	bool bandinit_pending;

	bool radio_monitor;
	bool going_down;

	bool beacon_template_virgin;

	struct brcms_timer *wdtimer;
	struct brcms_timer *radio_timer;

	/* promiscuous */
	uint filter_flags;

	/* driver feature */
	bool _rifs;

	/* AP-STA synchronization, power save */
	u8 bcn_li_bcn;
	u8 bcn_li_dtim;

	bool WDarmed;
	u32 WDlast;

	/* WME */
	u16 edcf_txop[IEEE80211_NUM_ACS];

	u16 wme_retries[IEEE80211_NUM_ACS];

	struct brcms_bss_cfg *bsscfg;

	struct modulecb *modulecb;

	u8 mimoft;
	s8 cck_40txbw;
	s8 ofdm_40txbw;
	s8 mimo_40txbw;

	struct brcms_bss_info *default_bss;

	u16 mc_fid_counter;

	char country_default[BRCM_CNTRY_BUF_SZ];
	char autocountry_default[BRCM_CNTRY_BUF_SZ];
	u16 prb_resp_timeout;

	u16 home_chanspec;

	/* PHY parameters */
	u16 chanspec;
	u16 usr_fragthresh;
	u16 fragthresh[NFIFO];
	u16 RTSThresh;
	u16 SRL;
	u16 LRL;
	u16 SFBL;
	u16 LFBL;

	/* network config */
	bool shortslot;
	s8 shortslot_override;
	bool include_legacy_erp;

	struct brcms_protection *protection;
	s8 PLCPHdr_override;

	struct brcms_stf *stf;

	u32 bcn_rspec;

	uint tempsense_lasttime;

	u16 tx_duty_cycle_ofdm;
	u16 tx_duty_cycle_cck;

	struct wiphy *wiphy;
	struct scb pri_scb;

	struct sk_buff *beacon;
	u16 beacon_tim_offset;
	u16 beacon_dtim_period;
	struct sk_buff *probe_resp;
};

/* antsel module specific state */
struct antsel_info {
	struct brcms_c_info *wlc;	/* pointer to main wlc structure */
	struct brcms_pub *pub;		/* pointer to public fn */
	u8 antsel_type;	/* Type of boardlevel mimo antenna switch-logic
				 * 0 = N/A, 1 = 2x4 board, 2 = 2x3 CB2 board
				 */
	u8 antsel_antswitch;	/* board level antenna switch type */
	bool antsel_avail;	/* Ant selection availability (SROM based) */
	struct brcms_antselcfg antcfg_11n; /* antenna configuration */
	struct brcms_antselcfg antcfg_cur; /* current antenna config (auto) */
};

enum brcms_bss_type {
	BRCMS_TYPE_STATION,
	BRCMS_TYPE_AP,
	BRCMS_TYPE_ADHOC,
};

/*
 * BSS configuration state
 *
 * wlc: wlc to which this bsscfg belongs to.
 * type: interface type
 * SSID_len: the length of SSID
 * SSID: SSID string
 *
 *
 * BSSID: BSSID (associated)
 * cur_etheraddr: h/w address
 * flags: BSSCFG flags; see below
 *
 * current_bss: BSS parms in ASSOCIATED state
 *
 *
 * ID: 'unique' ID of this bsscfg, assigned at bsscfg allocation
 */
struct brcms_bss_cfg {
	struct brcms_c_info *wlc;
	enum brcms_bss_type type;
	u8 SSID_len;
	u8 SSID[IEEE80211_MAX_SSID_LEN];
	u8 BSSID[ETH_ALEN];
	struct brcms_bss_info *current_bss;
};

int brcms_c_txfifo(struct brcms_c_info *wlc, uint fifo, struct sk_buff *p);
int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo,
			   uint *blocks);

int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config);
void brcms_c_mac_promisc(struct brcms_c_info *wlc, uint filter_flags);
u16 brcms_c_calc_lsig_len(struct brcms_c_info *wlc, u32 ratespec, uint mac_len);
u32 brcms_c_rspec_to_rts_rspec(struct brcms_c_info *wlc, u32 rspec,
			       bool use_rspec, u16 mimo_ctlchbw);
u16 brcms_c_compute_rtscts_dur(struct brcms_c_info *wlc, bool cts_only,
			       u32 rts_rate, u32 frame_rate,
			       u8 rts_preamble_type, u8 frame_preamble_type,
			       uint frame_len, bool ba);
void brcms_c_inval_dma_pkts(struct brcms_hardware *hw,
			    struct ieee80211_sta *sta, void (*dma_callback_fn));
void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend);
int brcms_c_set_nmode(struct brcms_c_info *wlc);
void brcms_c_beacon_phytxctl_txant_upd(struct brcms_c_info *wlc, u32 bcn_rate);
void brcms_b_antsel_type_set(struct brcms_hardware *wlc_hw, u8 antsel_type);
void brcms_b_set_chanspec(struct brcms_hardware *wlc_hw, u16 chanspec,
			  bool mute, struct txpwr_limits *txpwr);
void brcms_b_write_shm(struct brcms_hardware *wlc_hw, uint offset, u16 v);
u16 brcms_b_read_shm(struct brcms_hardware *wlc_hw, uint offset);
void brcms_b_mhf(struct brcms_hardware *wlc_hw, u8 idx, u16 mask, u16 val,
		 int bands);
void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags);
void brcms_b_mctrl(struct brcms_hardware *wlc_hw, u32 mask, u32 val);
void brcms_b_phy_reset(struct brcms_hardware *wlc_hw);
void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw);
void brcms_b_core_phypll_reset(struct brcms_hardware *wlc_hw);
void brcms_c_ucode_wake_override_set(struct brcms_hardware *wlc_hw,
				     u32 override_bit);
void brcms_c_ucode_wake_override_clear(struct brcms_hardware *wlc_hw,
				       u32 override_bit);
void brcms_b_write_template_ram(struct brcms_hardware *wlc_hw, int offset,
				int len, void *buf);
u16 brcms_b_rate_shm_offset(struct brcms_hardware *wlc_hw, u8 rate);
void brcms_b_copyto_objmem(struct brcms_hardware *wlc_hw, uint offset,
			   const void *buf, int len, u32 sel);
void brcms_b_copyfrom_objmem(struct brcms_hardware *wlc_hw, uint offset,
			     void *buf, int len, u32 sel);
void brcms_b_switch_macfreq(struct brcms_hardware *wlc_hw, u8 spurmode);
u16 brcms_b_get_txant(struct brcms_hardware *wlc_hw);
void brcms_b_phyclk_fgc(struct brcms_hardware *wlc_hw, bool clk);
void brcms_b_macphyclk_set(struct brcms_hardware *wlc_hw, bool clk);
void brcms_b_core_phypll_ctl(struct brcms_hardware *wlc_hw, bool on);
void brcms_b_txant_set(struct brcms_hardware *wlc_hw, u16 phytxant);
void brcms_b_band_stf_ss_set(struct brcms_hardware *wlc_hw, u8 stf_mode);
void brcms_c_init_scb(struct scb *scb);

#endif				/* _BRCM_MAIN_H_ */