#include "nexus_platform.h"
#include "nexus_video_decoder.h"
#include "nexus_stc_channel.h"
#include "nexus_display.h"
#include "nexus_video_window.h"
#include "nexus_video_input.h"
#include "nexus_video_adj.h"
#include "nexus_spdif_output.h"
#include "nexus_component_output.h"
#if NEXUS_HAS_HDMI_OUTPUT
#include "nexus_hdmi_output.h"
#endif
#if NEXUS_HAS_PLAYBACK && NEXUS_HAS_STREAM_MUX
#include "nexus_playback.h"
#include "nexus_record.h"
#include "nexus_file.h"
#include "nexus_video_encoder.h"
#include "nexus_audio_encoder.h"
#include "nexus_audio_mixer.h"
#include "nexus_stream_mux.h"
#include "nexus_recpump.h"
#include "nexus_record.h"
#endif
#if NEXUS_HAS_SYNC_CHANNEL
#include "nexus_sync_channel.h"
#endif

#include <stdio.h>
#include <assert.h>
#include "bstd.h"
#include "bkni.h"
#include "bdbg.h"

#include <pthread.h>
#include <malloc.h>
#include <sys/time.h>
#include <signal.h>
#include <errno.h>
#include <time.h>

////////////////////////////////////////////////////////////////////////////////
/* Hard-Coded For Now */
#define TRANSPORT_TYPE NEXUS_TransportType_eTs
#define VIDEO_PID 0x1e1
#define VIDEO_CODEC NEXUS_VideoCodec_eH264
#define AUDIO_PID 0x1e2
#define AUDIO_CODEC NEXUS_AudioCodec_eAc3

#define FORMAT NEXUS_VideoFormat_e720p
#define FRAME_RATE NEXUS_VideoFrameRate_e30
#define VIDEO_CODEC_PROFILE NEXUS_VideoCodecProfile_eBaseline
#define VIDEO_CODEC_LEVEL NEXUS_VideoCodecLevel_e31

////////////////////////////////////////////////////////////////////////////////

#define MAX_DSP_ENCODER_WIDTH   416
#define MAX_DSP_ENCODER_HEIGHT  224

BDBG_MODULE(BVP);

/* ============= utilities ==============*/

void ACL_Delay(unsigned int delay)
{
    struct timeval tv;
    int rv = 1;
    tv.tv_sec = delay/1000000;
    tv.tv_usec = (delay%1000000);
    errno = EINTR;
    while(rv!=0 && (errno == EINTR))
    {
        errno = 0;
        rv = select(0, NULL, NULL, NULL, &tv);
    }
    //usleep(delay*1000);
}

/* Generate a CRC for the specified data/length */
/* Initialize crc to 0 for new calculation.  Use an old result for subsequent calls. */
static uint32_t CRC32_mpeg(uint32_t crc, uint8_t *data, int length)
{
  int j;
  crc = ~crc;
  while (length--)
  {
    for (j=0; j<8; j++)
      crc = (crc<<1) ^ ((((*data >> (7-j)) ^ (crc >> 31)) & 1) ? 0x04c11db7 : 0);
    data++;
  }
  return crc;
}

#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
static void message_callback(void *context, int param)
{
    BSTD_UNUSED(context);
    BDBG_ERR(("message buffer %d overflows!", param));;
}
#endif

static void transcoderFinishCallback(void *context, int param)
{
    BKNI_EventHandle finishEvent = (BKNI_EventHandle)context;

    BSTD_UNUSED(param);
    BDBG_WRN(("Transcoding Complete!"));
    BKNI_SetEvent(finishEvent);
}

struct cmdSettings {
    NEXUS_VideoFormat displayFormat;
    NEXUS_VideoFrameRate encoderFrameRate;
    unsigned encoderBitrate;
    unsigned encoderGopStructureFramesP;
    unsigned encoderGopStructureFramesB;
    unsigned encoderGopStructureDuration;
    NEXUS_VideoCodec encoderVideoCodec;
    NEXUS_VideoCodecProfile encoderProfile;
    NEXUS_VideoCodecLevel encoderLevel;
} cmdSettings[] = {
    {FORMAT, FRAME_RATE, 2*1000*1000, 29, 0, 1000, VIDEO_CODEC, VIDEO_CODEC_PROFILE, VIDEO_CODEC_LEVEL}
};

struct streamSettings {
    const char *fname;
    uint16_t   videoPid;
    NEXUS_VideoCodec videoCodec;
    uint16_t   audioPid;
    NEXUS_AudioCodec audioCodec;
} streamSettings = { "raw.ts", VIDEO_PID, VIDEO_CODEC, AUDIO_PID, AUDIO_CODEC };


int main(int argc, char *argv[])
{
    char* inputFilename;
    char* outputFilename;

    if (argc == 3)
    {
        inputFilename = argv[1];
        outputFilename = argv[2];
    } else {
        fprintf(stderr, "Please specify both an input and output file!\n");
        return 1;
    }

    BDBG_WRN(("\n\n *** All your transcoders are belong to us. *** \n"));
    BDBG_WRN(("Reading from file %s and writing to file %s", inputFilename, outputFilename));

    NEXUS_PlatformSettings platformSettings;
    NEXUS_PlatformConfiguration platformConfig;
    NEXUS_StcChannelHandle stcChannel;
    NEXUS_StcChannelSettings stcSettings;
    NEXUS_PidChannelHandle videoPidChannel;
    NEXUS_DisplayHandle display;
    NEXUS_DisplaySettings displaySettings;
    NEXUS_VideoWindowHandle window;
    NEXUS_VideoWindowMadSettings windowMadSettings;
#ifdef NEXUS_NUM_DSP_VIDEO_ENCODERS
    NEXUS_VideoWindowScalerSettings sclSettings;
    NEXUS_VideoWindowSettings windowSettings;
#endif
    NEXUS_VideoDecoderHandle videoDecoder;
    NEXUS_VideoDecoderStartSettings videoProgram;
#if NEXUS_NUM_HDMI_OUTPUTS
    NEXUS_HdmiOutputStatus hdmiStatus;
    NEXUS_Error rc;
#endif
    NEXUS_AudioMixerSettings audioMixerSettings;
    NEXUS_AudioMixerHandle audioMixer;
    NEXUS_AudioDecoderHandle audioDecoder;
    NEXUS_AudioDecoderStartSettings audioProgram;
    NEXUS_PidChannelHandle audioPidChannel;
    NEXUS_AudioMuxOutputHandle audioMuxOutput;
    NEXUS_AudioMuxOutputDelayStatus audioDelayStatus;
    NEXUS_AudioMuxOutputStartSettings audioMuxStartSettings;
    NEXUS_PlaypumpHandle playpumpTranscodeAudio;
    NEXUS_PidChannelHandle pidChannelTranscodeAudio;
    NEXUS_AudioEncoderSettings encoderSettings;
    NEXUS_AudioEncoderHandle audioEncoder;
    NEXUS_AudioCodec audioCodec;
    NEXUS_FilePlayHandle file;
    NEXUS_PlaypumpHandle playpump;
    NEXUS_PlaybackHandle playback;
    NEXUS_PlaybackSettings playbackSettings;
    NEXUS_PlaybackPidChannelSettings playbackPidSettings;
    NEXUS_DisplayHandle displayTranscode;
    NEXUS_VideoWindowHandle windowTranscode;
    NEXUS_VideoEncoderHandle videoEncoder;
    NEXUS_VideoEncoderSettings videoEncoderConfig;
    NEXUS_VideoEncoderStartSettings videoEncoderStartConfig;
    NEXUS_VideoEncoderDelayRange videoDelay;
    NEXUS_PlaypumpHandle playpumpTranscodeVideo;
    NEXUS_PidChannelHandle pidChannelTranscodeVideo;
    NEXUS_RecordPidChannelSettings recordPidSettings;
    NEXUS_StreamMuxHandle streamMux;
    NEXUS_StreamMuxCreateSettings muxCreateSettings;
    BKNI_EventHandle finishEvent;
    NEXUS_StreamMuxStartSettings muxConfig;
    NEXUS_StreamMuxOutput muxOutput;
    NEXUS_PlaypumpOpenSettings playpumpConfig;
    NEXUS_PlaypumpHandle playpumpTranscodePcr;
    NEXUS_FileRecordHandle fileTranscode;
    NEXUS_StcChannelHandle stcChannelTranscode;
#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
    NEXUS_MessageSettings messageSettings;
    NEXUS_MessageStartSettings messageStartSettings;
    NEXUS_PidChannelHandle pidChannelUserData[2], pidChannelTranscodeUserData[2];
#endif

#if NEXUS_HAS_SYNC_CHANNEL
    NEXUS_SyncChannelSettings syncChannelSettings;
    NEXUS_SyncChannelHandle syncChannel;
#endif
    NEXUS_RecpumpHandle recpump;
    NEXUS_RecordHandle record;
    NEXUS_RecordSettings recordSettings;
    NEXUS_PidChannelHandle pidChannelTranscodePcr;
    NEXUS_PidChannelHandle pidChannelTranscodePat;
    NEXUS_PidChannelHandle pidChannelTranscodePmt;
    void *pat;
    void *pmt;

    int i = 0;
    //int iteration = 1;
    //char key;

    NEXUS_Platform_GetDefaultSettings(&platformSettings);
    platformSettings.openFrontend = false;
    NEXUS_Platform_Init(&platformSettings);
    NEXUS_Platform_GetConfiguration(&platformConfig);

    BDBG_WRN(("Setting up transcode pipeline: format %d, fr %d, bitrate %u, duration %d, codec %d, NEXUS_HAS_SYNC_CHANNEL %x",
                cmdSettings[i].displayFormat,
                cmdSettings[i].encoderFrameRate,
                cmdSettings[i].encoderBitrate,
                cmdSettings[i].encoderGopStructureDuration,
                cmdSettings[i].encoderVideoCodec,
                NEXUS_HAS_SYNC_CHANNEL));
    playpump = NEXUS_Playpump_Open(0, NULL);
    assert(playpump);
    playback = NEXUS_Playback_Create();
    assert(playback);

    file = NEXUS_FilePlay_OpenPosix(inputFilename, NULL);
    if (!file) {
        fprintf(stderr, "can't open file: %s\n", inputFilename);
        return -1;
    }

#if NEXUS_HAS_SYNC_CHANNEL
    /* create a sync channel */
    NEXUS_SyncChannel_GetDefaultSettings(&syncChannelSettings);
    syncChannel = NEXUS_SyncChannel_Create(&syncChannelSettings);
#endif


    NEXUS_StcChannel_GetDefaultSettings(0, &stcSettings);
    stcSettings.timebase = NEXUS_Timebase_e0;
    stcSettings.mode = NEXUS_StcChannelMode_eAuto;
    stcChannel = NEXUS_StcChannel_Open(0, &stcSettings);

    /* encoders/mux require different STC broadcast mode from decoder */
    NEXUS_StcChannel_GetDefaultSettings(1, &stcSettings);
    stcSettings.timebase = NEXUS_Timebase_e0;/* should be the same timebase for end-to-end locking */
    stcSettings.mode = NEXUS_StcChannelMode_eAuto;
    stcSettings.pcrBits = NEXUS_StcChannel_PcrBits_eFull42;/* ViCE2 requires 42-bit STC broadcast */
    stcChannelTranscode = NEXUS_StcChannel_Open(1, &stcSettings);


    NEXUS_Playback_GetSettings(playback, &playbackSettings);
    playbackSettings.playpump = playpump;
    /* set a stream format, it could be any audio video transport type or file format, i.e NEXUS_TransportType_eMp4, NEXUS_TransportType_eAvi ... */
    playbackSettings.playpumpSettings.transportType = TRANSPORT_TYPE;
    playbackSettings.stcChannel = stcChannel;
    NEXUS_Playback_SetSettings(playback, &playbackSettings);


    /* Bring up video display and outputs */
    NEXUS_Display_GetDefaultSettings(&displaySettings);
    displaySettings.format = NEXUS_VideoFormat_e480p;
    display = NEXUS_Display_Open(0, &displaySettings);
    window = NEXUS_VideoWindow_Open(display, 0);

#ifdef NEXUS_NUM_DSP_VIDEO_ENCODERS
    NEXUS_VideoWindow_GetMadSettings(window, &windowMadSettings);
    windowMadSettings.deinterlace = false;
    NEXUS_VideoWindow_SetMadSettings(window, &windowMadSettings);
#endif

#if NEXUS_NUM_COMPONENT_OUTPUTS
    NEXUS_Display_AddOutput(display, NEXUS_ComponentOutput_GetConnector(platformConfig.outputs.component[0]));
#endif
#if NEXUS_NUM_HDMI_OUTPUTS
    NEXUS_Display_AddOutput(display, NEXUS_HdmiOutput_GetVideoConnector(platformConfig.outputs.hdmi[0]));
    rc = NEXUS_HdmiOutput_GetStatus(platformConfig.outputs.hdmi[0], &hdmiStatus);
    if ( !rc && hdmiStatus.connected )
    {
        /* If current display format is not supported by monitor, switch to monitor's preferred format.
           If other connected outputs do not support the preferred format, a harmless error will occur. */
        NEXUS_Display_GetSettings(display, &displaySettings);
        if ( !hdmiStatus.videoFormatSupported[displaySettings.format] ) {
            displaySettings.format = hdmiStatus.preferredVideoFormat;
            NEXUS_Display_SetSettings(display, &displaySettings);
    }
    }
#endif

  /* app assumes that deinterlacer for main window is enabled by default */

    /* Open the audio decoder */
    audioDecoder = NEXUS_AudioDecoder_Open(0, NULL);

    /* Open the audio and pcr pid channel */
    NEXUS_Playback_GetDefaultPidChannelSettings(&playbackPidSettings);
    playbackPidSettings.pidSettings.pidType = NEXUS_PidType_eAudio;
    playbackPidSettings.pidTypeSettings.audio.primary = audioDecoder; /* must be told codec for correct handling */
    audioPidChannel = NEXUS_Playback_OpenPidChannel(playback, streamSettings.audioPid, &playbackPidSettings);

    /* Set up decoder Start structures now. We need to know the audio codec to properly set up
    the audio outputs. */
    NEXUS_AudioDecoder_GetDefaultStartSettings(&audioProgram);
    audioProgram.codec = streamSettings.audioCodec;
    audioProgram.pidChannel = audioPidChannel;
    audioProgram.stcChannel = stcChannel;

    /* Connect audio decoders to outputs */
    NEXUS_AudioOutput_AddInput(
        NEXUS_AudioDac_GetConnector(platformConfig.outputs.audioDacs[0]),
        NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo));
#if NEXUS_NUM_HDMI_OUTPUTS
    NEXUS_AudioOutput_AddInput(
        NEXUS_HdmiOutput_GetAudioConnector(platformConfig.outputs.hdmi[0]),
        NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo));
#endif

  /* Open audio mixer.  The mixer can be left running at all times to provide continuous audio output despite input discontinuities.  */
  NEXUS_AudioMixer_GetDefaultSettings(&audioMixerSettings);
  audioMixerSettings.mixUsingDsp = true;
  audioMixer = NEXUS_AudioMixer_Open(&audioMixerSettings);
  assert(audioMixer);

    /* Open audio mux output */
    audioMuxOutput = NEXUS_AudioMuxOutput_Create(NULL);
    assert(audioMuxOutput);
    /* Open audio encoder */
    NEXUS_AudioEncoder_GetDefaultSettings(&encoderSettings);
    encoderSettings.codec = NEXUS_AudioCodec_eAac;
    audioCodec = encoderSettings.codec;
    audioEncoder = NEXUS_AudioEncoder_Open(&encoderSettings);
    assert(audioEncoder);

  /* Connect decoder to mixer and set as master */
  NEXUS_AudioMixer_AddInput(audioMixer,
    NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo));
  audioMixerSettings.master = NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo);
  NEXUS_AudioMixer_SetSettings(audioMixer, &audioMixerSettings);
  /* Connect mixer to encoder */
  NEXUS_AudioEncoder_AddInput(audioEncoder, NEXUS_AudioMixer_GetConnector(audioMixer));
    /* Connect mux to encoder */
    NEXUS_AudioOutput_AddInput(
        NEXUS_AudioMuxOutput_GetConnector(audioMuxOutput), NEXUS_AudioEncoder_GetConnector(audioEncoder));
  NEXUS_AudioOutput_AddInput(
    NEXUS_AudioDummyOutput_GetConnector(platformConfig.outputs.audioDummy[0]),
    NEXUS_AudioMixer_GetConnector(audioMixer));

    /* bring up decoder and connect to local display */
    videoDecoder = NEXUS_VideoDecoder_Open(0, NULL); /* take default capabilities */

    /* NOTE: must open video encoder before display; otherwise open will init ViCE2 core
     * which might cause encoder display GISB error since encoder display would
     * trigger RDC to program mailbox registers in ViCE2;
     */
    videoEncoder = NEXUS_VideoEncoder_Open(0, NULL);
    assert(videoEncoder);

    /* Bring up video encoder display */
    NEXUS_Display_GetDefaultSettings(&displaySettings);
    displaySettings.displayType = NEXUS_DisplayType_eAuto;
    displaySettings.timingGenerator = NEXUS_DisplayTimingGenerator_eEncoder;
    displaySettings.format = cmdSettings[i].displayFormat;/* source is 60hz */
    displaySettings.frameRateMaster = NULL;/* disable frame rate tracking for now */
    displaySettings.format = cmdSettings[i].displayFormat;
    displayTranscode = NEXUS_Display_Open(NEXUS_ENCODER_DISPLAY_IDX, &displaySettings);/* cmp3 for transcoder */
    assert(displayTranscode);

    windowTranscode = NEXUS_VideoWindow_Open(displayTranscode, 0);
    assert(windowTranscode);

#ifdef NEXUS_NUM_DSP_VIDEO_ENCODERS
    NEXUS_VideoWindow_GetSettings(windowTranscode, &windowSettings);
    windowSettings.position.width = MAX_DSP_ENCODER_WIDTH;
    windowSettings.position.height = MAX_DSP_ENCODER_HEIGHT;
    windowSettings.pixelFormat = NEXUS_PixelFormat_eCr8_Y18_Cb8_Y08;
    windowSettings.visible = false;
    NEXUS_VideoWindow_SetSettings(windowTranscode, &windowSettings);

    NEXUS_VideoWindow_GetScalerSettings(windowTranscode, &sclSettings);
    sclSettings.bandwidthEquationParams.bias = NEXUS_ScalerCaptureBias_eScalerBeforeCapture;
    sclSettings.bandwidthEquationParams.delta = 1000000;
    NEXUS_VideoWindow_SetScalerSettings(windowTranscode, &sclSettings);
#endif

    /* enable deinterlacer to improve quality */
    NEXUS_VideoWindow_GetMadSettings(windowTranscode, &windowMadSettings);
    windowMadSettings.deinterlace = true;
    windowMadSettings.enable22Pulldown = true; /* actually reverse 22 pulldown */
    windowMadSettings.enable32Pulldown = true; /* actually reverse 32 pulldown */
    NEXUS_VideoWindow_SetMadSettings(windowTranscode, &windowMadSettings);

    /* connect same decoder to the encoder display;
     * NOTE: simul display + transcode mode might have limitation in audio pathre;
     * here is for video transcode bringup purpose;
     */
    NEXUS_VideoWindow_AddInput(windowTranscode, NEXUS_VideoDecoder_GetConnector(videoDecoder));
    NEXUS_VideoWindow_AddInput(window, NEXUS_VideoDecoder_GetConnector(videoDecoder));

    /* Open the video pid channel */
    NEXUS_Playback_GetDefaultPidChannelSettings(&playbackPidSettings);
    playbackPidSettings.pidSettings.pidType = NEXUS_PidType_eVideo;
    playbackPidSettings.pidTypeSettings.video.codec = streamSettings.videoCodec; /* must be told codec for correct handling */
    playbackPidSettings.pidTypeSettings.video.index = true;
    playbackPidSettings.pidTypeSettings.video.decoder = videoDecoder;
    videoPidChannel = NEXUS_Playback_OpenPidChannel(playback, streamSettings.videoPid, &playbackPidSettings);

    /* Set up decoder Start structures now. We need to know the audio codec to properly set up
    the audio outputs. */
    NEXUS_VideoDecoder_GetDefaultStartSettings(&videoProgram);
    videoProgram.codec = streamSettings.videoCodec;
    videoProgram.pidChannel = videoPidChannel;
    videoProgram.stcChannel = stcChannel;

    NEXUS_VideoEncoder_GetSettings(videoEncoder, &videoEncoderConfig);
    videoEncoderConfig.variableFrameRate = true; /* encoder can detect film content and follow CET */
    videoEncoderConfig.frameRate = NEXUS_VideoFrameRate_e30;
    videoEncoderConfig.frameRate = cmdSettings[i].encoderFrameRate;
    videoEncoderConfig.bitrateMax = cmdSettings[i].encoderBitrate;
    videoEncoderConfig.streamStructure.framesP = cmdSettings[i].encoderGopStructureFramesP;
    videoEncoderConfig.streamStructure.framesB = cmdSettings[i].encoderGopStructureFramesB;
    videoEncoderConfig.streamStructure.duration = cmdSettings[i].encoderGopStructureDuration;

    NEXUS_VideoEncoder_GetDefaultStartSettings(&videoEncoderStartConfig);
    videoEncoderStartConfig.codec = cmdSettings[i].encoderVideoCodec;
    videoEncoderStartConfig.profile = cmdSettings[i].encoderProfile;
    videoEncoderStartConfig.level = cmdSettings[i].encoderLevel;
    videoEncoderStartConfig.input = displayTranscode;
    videoEncoderStartConfig.stcChannel = stcChannelTranscode;

#ifdef NEXUS_NUM_DSP_VIDEO_ENCODERS
    videoEncoderStartConfig.bounds.inputDimension.max.width = windowSettings.position.width;
    videoEncoderStartConfig.bounds.inputDimension.max.height = windowSettings.position.height;
#else

{   /* set proper encoder interlaced/progressive format. NOTE: fw currently doesn't support dynamic switch between interlaced and progressive. */
    #include "nexus_core_utils.h"
    NEXUS_VideoFormatInfo fmtInfo;
    NEXUS_VideoFormat_GetInfo(cmdSettings[i].displayFormat, &fmtInfo);
    videoEncoderStartConfig.interlaced = fmtInfo.interlaced;
}
    videoEncoderStartConfig.encodeUserData = true;

  /******************************************
   * add configurable delay to video path
   */
  /* NOTE: ITFP is encoder feature to detect and lock on 3:2/2:2 cadence in the video content to help
   * efficient coding for interlaced formats; disabling ITFP will impact the bit efficiency but reduce the encode delay. */
  videoEncoderConfig.enableFieldPairing = true;

  /* 0 to use default 750ms rate buffer delay; TODO: allow user to adjust it to lower encode delay at cost of quality reduction! */
  videoEncoderStartConfig.rateBufferDelay = 0;

  /* to allow 23.976p passthru; TODO: allow user to configure minimum framerate to achieve lower delay!
   * Note: lower minimum framerate means longer encode delay */
  videoEncoderStartConfig.bounds.inputFrameRate.min = NEXUS_VideoFrameRate_e23_976;

  /* to allow 24 ~ 60p dynamic frame rate coding TODO: allow user to config higher minimum frame rate for lower delay! */
  videoEncoderStartConfig.bounds.outputFrameRate.min = NEXUS_VideoFrameRate_e23_976;
  videoEncoderStartConfig.bounds.outputFrameRate.max = NEXUS_VideoFrameRate_e60;

  /* max encode size allows 1080p encode; TODO: allow user to choose lower max resolution for lower encode delay */
  videoEncoderStartConfig.bounds.inputDimension.max.width = 1920;
  videoEncoderStartConfig.bounds.inputDimension.max.height = 1088;

    /* encode setting and startSetting to be set after end-to-end delay is determined */

    /* get end-to-end delay (Dee) for audio and video encoders;
     * TODO: match AV delay! In other words,
     *   if (aDee > vDee) {
     *       vDee' = aDee' = aDee;
     *   }
     *   else {
     *       vDee' = aDee' = vDee;
     *   }
     */
    {
        unsigned Dee;

        /* NOTE: video encoder delay is in 27MHz ticks */
        NEXUS_VideoEncoder_GetDelayRange(videoEncoder, &videoEncoderConfig, &videoEncoderStartConfig, &videoDelay);
        printf("\n\tVideo encoder end-to-end delay = %u ms; maximum allowed: %u ms\n", videoDelay.min/27000, videoDelay.max/27000);

        NEXUS_AudioMuxOutput_GetDelayStatus(audioMuxOutput, audioCodec, &audioDelayStatus);
        printf("\tAudio codec %d end-to-end delay = %u ms\n", audioCodec, audioDelayStatus.endToEndDelay);

        Dee = audioDelayStatus.endToEndDelay * 27000; /* in 27MHz ticks */
        if(Dee > videoDelay.min)
        {
            if(Dee > videoDelay.max)
            {
                BDBG_ERR(("\tAudio Dee is way too big! Use video Dee max!"));
                Dee = videoDelay.max;
            }
            else
            {
                printf("\tUse audio Dee %u ms %u ticks@27Mhz!\n", Dee/27000, Dee);
            }
        }
        else
        {
            Dee = videoDelay.min;
            printf("\tUse video Dee %u ms or %u ticks@27Mhz!\n\n", Dee/27000, Dee);
        }
        videoEncoderConfig.encoderDelay = Dee;

        /* Start audio mux output */
        NEXUS_AudioMuxOutput_GetDefaultStartSettings(&audioMuxStartSettings);
        audioMuxStartSettings.stcChannel = stcChannelTranscode;
        audioMuxStartSettings.presentationDelay = Dee/27000;/* in ms */
        NEXUS_AudioMuxOutput_Start(audioMuxOutput, &audioMuxStartSettings);
    }
    /* Note: video encoder SetSettings needs to be called after the encoder delay is determined; */
    NEXUS_VideoEncoder_SetSettings(videoEncoder, &videoEncoderConfig);

    NEXUS_Playpump_GetDefaultOpenSettings(&playpumpConfig);
    playpumpConfig.fifoSize = 16384; /* reduce FIFO size allocated for playpump */
    playpumpConfig.numDescriptors = 64; /* set number of descriptors */
    playpumpConfig.streamMuxCompatible = true;
    playpumpTranscodeVideo = NEXUS_Playpump_Open(1, &playpumpConfig);
    assert(playpumpTranscodeVideo);
#endif

    NEXUS_Playpump_GetDefaultOpenSettings(&playpumpConfig);
    playpumpConfig.fifoSize = 16384; /* reduce FIFO size allocated for playpump */
    playpumpConfig.numDescriptors = 64; /* set number of descriptors */
    playpumpConfig.streamMuxCompatible = true;
    playpumpTranscodeAudio = NEXUS_Playpump_Open(2, &playpumpConfig);
    assert(playpumpTranscodeAudio);
    playpumpTranscodePcr = NEXUS_Playpump_Open(3, &playpumpConfig);
    assert(playpumpTranscodePcr);

    BKNI_CreateEvent(&finishEvent);
    NEXUS_StreamMux_GetDefaultCreateSettings(&muxCreateSettings);
    muxCreateSettings.finished.callback = transcoderFinishCallback;
    muxCreateSettings.finished.context = finishEvent;
    streamMux = NEXUS_StreamMux_Create(&muxCreateSettings);
    NEXUS_StreamMux_GetDefaultStartSettings(&muxConfig);
    muxConfig.transportType = NEXUS_TransportType_eTs;
    muxConfig.stcChannel = stcChannelTranscode;

    muxConfig.video[0].pid = 0x11;
    muxConfig.video[0].encoder = videoEncoder;
    muxConfig.video[0].playpump = playpumpTranscodeVideo;

    muxConfig.audio[0].pid = 0x12;
    muxConfig.audio[0].muxOutput = audioMuxOutput;
    muxConfig.audio[0].playpump = playpumpTranscodeAudio;
    muxConfig.pcr.pid = 0x13;
    muxConfig.pcr.playpump = playpumpTranscodePcr;
    muxConfig.pcr.interval = 50;

#if NEXUS_HAS_SYNC_CHANNEL
    /* connect sync channel */
    NEXUS_SyncChannel_GetSettings(syncChannel, &syncChannelSettings);
    syncChannelSettings.videoInput = NEXUS_VideoDecoder_GetConnector(videoDecoder);
    syncChannelSettings.audioInput[0] = NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo);
    NEXUS_SyncChannel_SetSettings(syncChannel, &syncChannelSettings);
#endif

    /* Start decoder */
    NEXUS_VideoDecoder_Start(videoDecoder, &videoProgram);
    NEXUS_AudioDecoder_Start(audioDecoder, &audioProgram);

    /* Start playback */
    NEXUS_Playback_Start(playback, file, NULL);

    recpump = NEXUS_Recpump_Open(0, NULL);
    assert(recpump);

    record = NEXUS_Record_Create();
    assert(record);

    NEXUS_Record_GetSettings(record, &recordSettings);
    recordSettings.recpump = recpump;
    NEXUS_Record_SetSettings(record, &recordSettings);

#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
{
    unsigned userDataPid[2] = {2501, 2514};

    NEXUS_Message_GetDefaultSettings(&messageSettings);
    /* SCTE 270 spec max TS VBI user data bitrate=270Kbps, 256KB buffer can hold 7.5 seconds;
       worthy user data for video synchronization; TODO: may be reduced if unnecessary */
    messageSettings.bufferSize = 256*1024;
    messageSettings.overflow.callback = message_callback; /* report overflow error */
    messageSettings.overflow.param = 0;
    muxConfig.userdata[0].message = NEXUS_Message_Open(&messageSettings);
    BDBG_ASSERT(muxConfig.userdata[0].message);
    messageSettings.overflow.param = 1;
    muxConfig.userdata[1].message = NEXUS_Message_Open(&messageSettings);
    BDBG_ASSERT(muxConfig.userdata[1].message);

    /* open source user data PID channel */
    NEXUS_Playback_GetDefaultPidChannelSettings(&playbackPidSettings);
    playbackPidSettings.pidSettings.pidType = NEXUS_PidType_eOther; /* capture the TS packets with the user data PES */
    playbackPidSettings.pidSettings.pidSettings.pidChannelIndex = NEXUS_PID_CHANNEL_OPEN_MESSAGE_CAPABLE;
    playbackPidSettings.pidSettings.pidSettings.remap.enabled = true;
    playbackPidSettings.pidSettings.pidSettings.remap.pid     = 0x14;/* optional PID remap */

    pidChannelUserData[0] = NEXUS_Playback_OpenPidChannel(playback, userDataPid[0], &playbackPidSettings);
    assert(pidChannelUserData[0]);
    /* open second user data PID */
    playbackPidSettings.pidSettings.pidSettings.remap.pid     = 0x15;/* optional PID remap */
    pidChannelUserData[1] = NEXUS_Playback_OpenPidChannel(playback, userDataPid[1], &playbackPidSettings);
    assert(pidChannelUserData[1]);

    NEXUS_Message_GetDefaultStartSettings(muxConfig.userdata[0].message, &messageStartSettings);
    messageStartSettings.format = NEXUS_MessageFormat_eTs;
    messageStartSettings.pidChannel = pidChannelUserData[0];

    /* must start message before stream mux starts */
    NEXUS_Message_Start(muxConfig.userdata[0].message, &messageStartSettings);

    messageStartSettings.pidChannel = pidChannelUserData[1];
    NEXUS_Message_Start(muxConfig.userdata[1].message, &messageStartSettings);

    /* open transcode mux output user data PidChannels */
    pidChannelTranscodeUserData[0] = NEXUS_Playpump_OpenPidChannel(playpumpTranscodePcr, 0x14, NULL);
    assert(pidChannelTranscodeUserData[0]);
    pidChannelTranscodeUserData[1] = NEXUS_Playpump_OpenPidChannel(playpumpTranscodePcr, 0x15, NULL);
    assert(pidChannelTranscodeUserData[1]);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodeUserData[0], NULL);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodeUserData[1], NULL);
}
#endif

#define BTST_PMT_PID 0x0055
    /* open PidChannels */
    pidChannelTranscodePcr = NEXUS_Playpump_OpenPidChannel(playpumpTranscodePcr, muxConfig.pcr.pid, NULL);
    assert(pidChannelTranscodePcr);
    pidChannelTranscodePmt = NEXUS_Playpump_OpenPidChannel(playpumpTranscodePcr, BTST_PMT_PID, NULL);
    assert(pidChannelTranscodePmt);
    pidChannelTranscodePat = NEXUS_Playpump_OpenPidChannel(playpumpTranscodePcr, 0, NULL);
    assert(pidChannelTranscodePat);

    /* start mux */
    NEXUS_StreamMux_Start(streamMux,&muxConfig, &muxOutput);
    pidChannelTranscodeVideo = muxOutput.video[0];
    pidChannelTranscodeAudio = muxOutput.audio[0];

    /* configure the video pid for indexing */
    NEXUS_Record_GetDefaultPidChannelSettings(&recordPidSettings);
    recordPidSettings.recpumpSettings.pidType = NEXUS_PidType_eVideo;
    recordPidSettings.recpumpSettings.pidTypeSettings.video.index = true;
    recordPidSettings.recpumpSettings.pidTypeSettings.video.codec = cmdSettings[i].encoderVideoCodec;

    /* add multiplex data to the same record */
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodeVideo, &recordPidSettings);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodeAudio, NULL);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodePcr, NULL);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodePat, NULL);
    NEXUS_Record_AddPidChannel(record, pidChannelTranscodePmt, NULL);

    fileTranscode = NEXUS_FileRecord_OpenPosix(outputFilename, "/var/media/videos/transcoded.nav");
    assert(fileTranscode);

    /* Start record of stream mux output */
    NEXUS_Record_Start(record, fileTranscode);

    {
static const uint8_t s_auiTSPacket_PAT[188] =
{
   0x47,0x40,0x00,0x30,0xa6,0x40,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,'P', 'A', 'T',
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0x00,0x00,0xb0,0x0d,0x00,
   0x00,0x81,0x00,0x00,0x00,0x01,0xe0,0x55,
   0x65,0x80,0x5e,0xdc,
};

#define BTST_PMT_TRANSPORT_IDX BTST_SYSTEM_TRANSPORT_IDX
static const uint8_t s_auiTSPacket_PMT[188] =
{
   0x47,0x40,BTST_PMT_PID,0x30,
#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
   0x66,/* adaptation field length */
#else
   0x9c,/* adaptation field length */
#endif
   0x40,/* AF flags */
   0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,0xff,0xff,'P', 'M', 'T',
   0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
   0xff,0xff,0xff,
   /* placeholder for VBI user data PMT section and descriptors */
   0x00,/* pointer */
   0x02,0xb0,0x4d,0x00,0x01,0xc1,0x00,0x00,0xe0,0x13,0xf0,0x00,
   /* VBI user data PID */
   0x06,0xe0,0x14,0xf0,0x19,
   0x52,0x01,0x0e,0x56,0x14,0x64,0x75,0x74,
   0x10,0x88,0x6e,0x6f,0x72,0x17,0x77,0x64,
   0x75,0x74,0x08,0x88,0x73,0x77,0x65,0x16,
   0x91,
   /* VBI user data PID */
   0x06,0xe0,0x15,0xf0,0x13,
   0x0a,0x04,0x73,0x77,0x65,0x00,
#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
   0x52,0x01,
   0x12,0x59,0x08,0x73,0x77,0x65,0x10,0x00,
   0x02,0x00,0x02,
#else
   0x00,/* pointer */
   0x02,0xb0,0x17,0x00,0x01,0xc1,0x00,0x00,0xe0,0x13,0xf0,0x00,
#endif
   0x1b,0xe0,0x11,0xf0,0x00,/* video */
   0x81,0xe0,0x12,0xf0,0x00,/* audio */
   0x3d,0x19,0x07,0x2f
};

    NEXUS_StreamMuxSystemData psi[2];
    /* Get CRC right to be playable by VLCplayer etc 3rd party SW */
    uint32_t uiCRC = CRC32_mpeg(0, (uint8_t *) s_auiTSPacket_PAT + 184 - (8+4*1), 8+4*1);
    fprintf(stderr, "PAT crc=%x\n", uiCRC);
    NEXUS_Memory_Allocate(188, NULL, &pat);
    NEXUS_Memory_Allocate(188, NULL, &pmt);
    BKNI_Memcpy(pat, s_auiTSPacket_PAT, sizeof(s_auiTSPacket_PAT));
    BKNI_Memcpy(pmt, s_auiTSPacket_PMT, sizeof(s_auiTSPacket_PMT));
    ((uint8_t*)pat)[184] = (uiCRC >> 24) & 0xFF;
    ((uint8_t*)pat)[185] = (uiCRC >> 16) & 0xFF;
    ((uint8_t*)pat)[186] = (uiCRC >>  8) & 0xFF;
    ((uint8_t*)pat)[187] = (uiCRC >>  0) & 0xFF;

    /* video codec */
    switch(videoEncoderStartConfig.codec)
    {
      case NEXUS_VideoCodec_eMpeg2:         ((uint8_t *) pmt)[184-2*5] = 0x2; break;
      case NEXUS_VideoCodec_eMpeg4Part2:    ((uint8_t *) pmt)[184-2*5] = 0x10; break;
      case NEXUS_VideoCodec_eH264:          ((uint8_t *) pmt)[184-2*5] = 0x1b; break;
      case NEXUS_VideoCodec_eVc1SimpleMain: ((uint8_t *) pmt)[184-2*5] = 0xea; break;
      default:
        BDBG_ERR(("Video encoder codec %d is not supported!\n", videoEncoderStartConfig.codec));
        BDBG_ASSERT(0);
    }
    /* audio stream type */
    switch(audioCodec)
    {
      case NEXUS_AudioCodec_eMpeg:         ((uint8_t *) pmt)[184-5] = 0x4; break;
      case NEXUS_AudioCodec_eMp3:          ((uint8_t *) pmt)[184-5] = 0x4; break;
      case NEXUS_AudioCodec_eAac    :      ((uint8_t *) pmt)[184-5] = 0xf; break; /* ADTS */
      case NEXUS_AudioCodec_eAacPlus:      ((uint8_t *) pmt)[184-5] = 0x11; break;/* LOAS */
      /* MP2TS doesn't allow 14496-3 AAC+ADTS; here is placeholder to test AAC-HE before LOAS encode is supported; */
      case NEXUS_AudioCodec_eAacPlusAdts:  ((uint8_t *) pmt)[184-5] = 0x11; break;
      case NEXUS_AudioCodec_eAc3:          ((uint8_t *) pmt)[184-5] = 0x81; break;
      default:
        BDBG_ERR(("Audio encoder codec %d is not supported!\n", audioCodec));
    }
        /* A+V two ES */
#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU
        uiCRC = CRC32_mpeg(0, (uint8_t *) pmt + 184 - (12+5*2)-54, 12+5*2+54);
#else
        uiCRC = CRC32_mpeg(0, (uint8_t *) pmt + 184 - (12+5*2), 12+5*2);
#endif
        fprintf(stderr, "PMT crc=%x\n", uiCRC);

        ((uint8_t*)pmt)[184] = (uiCRC >> 24) & 0xFF;
        ((uint8_t*)pmt)[185] = (uiCRC >> 16) & 0xFF;
        ((uint8_t*)pmt)[186] = (uiCRC >>  8) & 0xFF;
        ((uint8_t*)pmt)[187] = (uiCRC >>  0) & 0xFF;
        NEXUS_Memory_FlushCache(pat, sizeof(s_auiTSPacket_PAT));
        NEXUS_Memory_FlushCache(pmt, sizeof(s_auiTSPacket_PMT));
        BKNI_Memset(psi, 0, sizeof(psi));
        psi[0].size = 188;
        psi[0].pData = pat;
        psi[0].timestampDelta = 100;
        psi[1].size = 188;
        psi[1].pData = pmt;
        psi[1].timestampDelta = 100;
        NEXUS_StreamMux_AddSystemDataBuffer(streamMux, &psi[0]);
        NEXUS_StreamMux_AddSystemDataBuffer(streamMux, &psi[1]);
}

    NEXUS_VideoEncoder_Start(videoEncoder, &videoEncoderStartConfig);

    BDBG_WRN(("\n\nTranscoding for 60 minutes, press any key to stop now...\n"));
    ACL_Delay(3600000000);

    /* Bring down system */
    NEXUS_Playback_Stop(playback);
    NEXUS_VideoDecoder_Stop(videoDecoder);

    NEXUS_AudioDecoder_Stop(audioDecoder);
    NEXUS_AudioMixer_Stop(audioMixer);
    NEXUS_AudioMuxOutput_Stop(audioMuxOutput);
#if NEXUS_HAS_SYNC_CHANNEL
    /* disconnect sync channel */
    NEXUS_SyncChannel_GetSettings(syncChannel, &syncChannelSettings);
    syncChannelSettings.videoInput = NULL;
    syncChannelSettings.audioInput[0] = NULL;
    syncChannelSettings.audioInput[1] = NULL;
    NEXUS_SyncChannel_SetSettings(syncChannel, &syncChannelSettings);
#endif


    NEXUS_VideoEncoder_Stop(videoEncoder, NULL);
    NEXUS_StreamMux_Finish(streamMux);

    // wait for the encoder buffer model's data to be drained //
    if(BKNI_WaitForEvent(finishEvent, (videoEncoderConfig.encoderDelay/27000)*2)!=BERR_SUCCESS) {
        fprintf(stderr, "TIMEOUT\n");
    }

    BKNI_DestroyEvent(finishEvent);

    NEXUS_Record_Stop(record);
    /* Note: remove all record PID channels before stream mux stop since streammux would close the A/V PID channels */
    NEXUS_Record_RemoveAllPidChannels(record);
    NEXUS_StreamMux_Stop(streamMux);

#if BTST_ENABLE_TS_LAYER_USER_DATA_PASS_THRU /* stop message after stream mux stops */
    NEXUS_Message_Stop(muxConfig.userdata[0].message);
    NEXUS_Message_Close(muxConfig.userdata[0].message);
    NEXUS_Message_Stop(muxConfig.userdata[1].message);
    NEXUS_Message_Close(muxConfig.userdata[1].message);
#endif

    NEXUS_Record_Destroy(record);
    NEXUS_Recpump_Close(recpump);
    NEXUS_FileRecord_Close(fileTranscode);

    NEXUS_Playback_CloseAllPidChannels(playback);
    NEXUS_Playpump_CloseAllPidChannels(playpumpTranscodePcr);
    NEXUS_FilePlay_Close(file);
    NEXUS_Playback_Destroy(playback);
    NEXUS_Playpump_Close(playpump);

    NEXUS_VideoWindow_RemoveInput(window, NEXUS_VideoDecoder_GetConnector(videoDecoder));
    NEXUS_VideoWindow_RemoveInput(windowTranscode, NEXUS_VideoDecoder_GetConnector(videoDecoder));
    NEXUS_VideoInput_Shutdown(NEXUS_VideoDecoder_GetConnector(videoDecoder));
    NEXUS_VideoDecoder_Close(videoDecoder);
    NEXUS_VideoWindow_Close(window);
    NEXUS_VideoWindow_Close(windowTranscode);
    NEXUS_Display_Close(display);
    NEXUS_Display_Close(displayTranscode);

    NEXUS_StreamMux_Destroy(streamMux);

    NEXUS_Playpump_Close(playpumpTranscodePcr);

    NEXUS_Playpump_Close(playpumpTranscodeVideo);
    NEXUS_VideoEncoder_Close(videoEncoder);

    NEXUS_AudioOutput_RemoveAllInputs(NEXUS_AudioMuxOutput_GetConnector(audioMuxOutput));
    NEXUS_AudioEncoder_RemoveAllInputs(audioEncoder);
    NEXUS_AudioInput_Shutdown(NEXUS_AudioEncoder_GetConnector(audioEncoder));
    NEXUS_AudioEncoder_Close(audioEncoder);
    NEXUS_AudioMixer_RemoveAllInputs(audioMixer);
    NEXUS_AudioOutput_RemoveAllInputs(NEXUS_AudioDummyOutput_GetConnector(platformConfig.outputs.audioDummy[0]));
    NEXUS_AudioOutput_Shutdown(NEXUS_AudioDummyOutput_GetConnector(platformConfig.outputs.audioDummy[0]));
    NEXUS_AudioInput_Shutdown(NEXUS_AudioMixer_GetConnector(audioMixer));
    NEXUS_AudioMixer_Close(audioMixer);
    NEXUS_AudioOutput_RemoveAllInputs(NEXUS_AudioDac_GetConnector(platformConfig.outputs.audioDacs[0]));
    NEXUS_AudioOutput_RemoveAllInputs(NEXUS_SpdifOutput_GetConnector(platformConfig.outputs.spdif[0]));
#if NEXUS_NUM_HDMI_OUTPUTS
    NEXUS_AudioOutput_RemoveAllInputs(NEXUS_HdmiOutput_GetAudioConnector(platformConfig.outputs.hdmi[0]));
#endif

    NEXUS_Playpump_Close(playpumpTranscodeAudio);
    NEXUS_AudioOutput_Shutdown(NEXUS_AudioMuxOutput_GetConnector(audioMuxOutput));
    NEXUS_AudioMuxOutput_Destroy(audioMuxOutput);

    NEXUS_AudioInput_Shutdown(NEXUS_AudioDecoder_GetConnector(audioDecoder, NEXUS_AudioDecoderConnectorType_eStereo));
    NEXUS_AudioOutput_Shutdown(NEXUS_AudioDac_GetConnector(platformConfig.outputs.audioDacs[0]));
    NEXUS_AudioOutput_Shutdown(NEXUS_SpdifOutput_GetConnector(platformConfig.outputs.spdif[0]));

    NEXUS_AudioDecoder_Close(audioDecoder);

#if NEXUS_HAS_SYNC_CHANNEL
    NEXUS_SyncChannel_Destroy(syncChannel);
#endif

    NEXUS_StcChannel_Close(stcChannel);
    NEXUS_StcChannel_Close(stcChannelTranscode);
    NEXUS_Memory_Free(pat);
    NEXUS_Memory_Free(pmt);

    NEXUS_Platform_Uninit();

    return 0;
}

//#endif