cmds/alivemonitor.c - vendor/google/platform - Git at Google

 /*
  * Copyright 2012-2014 Google Inc. All rights reserved.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include <assert.h>
 #include <errno.h>
 #include <fcntl.h>
 #ifdef __ANDROID__
 #include <libgen.h>  // For basename() on Android.
 #endif
 #include <limits.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/stat.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <time.h>
 #include <unistd.h>


 static volatile sig_atomic_t got_signal = 0;
 const char *keepalive_file;
 pid_t p_pid;
 time_t old_time;


 void sighandler(int sig) {
   got_signal = sig;
 }

 static void usage(char *name) {
   fprintf(stderr,
           "Usage: %s [-S <prekill_signal> [-T <prekill_timeout>]]\n"
           "          <keepalive_file> <first_check> <incr_checks>\n"
           "          <timeout> <command> [args...]\n"
           "    -S <prekill_signal>  try this signal (numeric) before SIGKILL\n"
           "    -T <prekill_timeout> wait time (secs) after prekill_signal\n"
           "    <keepalive_file>     name of the stamp file to monitor\n"
           "    <first_check>        time (secs) before first check\n"
           "    <incr_checks>        time (secs) before subsequent checks\n"
           "    <timeout>            time (secs) before killing process\n"
           "    <command> [args...]  the command to kill upon timeout\n"
           "\n"
           "    The keepalive logic runs in cycles. A cycle begins and ends\n"
           "    with a successful check of the <keepalive_file>, i.e., it was\n"
           "    touched since the last cycle. The first check starts\n"
           "    <first_check> secs after the cycle begins. Incremental checks\n"
           "    are done at <incr_checks> intervals, until <keepalive_file>\n"
           "    was found to be updated or <timeout> is reached. In the\n"
           "    former case, the cycle restarts, while in the latter\n"
           "    (timeout) case, the process is restarted and the cycle starts\n"
           "    again.\n\n", name);
 }

 long long parse_to_msec(const char *str) {
   return atof(str) * 1000;
 }

 // return the current (monotonic) time in secs
 long long now() {
   struct timespec tp;

   if (clock_gettime(CLOCK_MONOTONIC, &tp)) {
     perror("alivemonitor: clock_gettime failed.");
     exit(1);
   }
   return tp.tv_sec * 1000 + (tp.tv_nsec / 1000000);
 }

 enum Aliveness {
   EXITED = 2,
   NO_CHANGE = 1,
   ALIVE = 0,
   ERROR = -1,
 };

 // Sleep a given amount of time, while continuously checking on the parent.
 // Return codes:
 //  EXITED: parent exited
 //  NO_CHANGE: no change in alive status
 //  ALIVE: alive!
 //  ERROR: system error, abort
 enum Aliveness sleep_check_alive(long long stime) {
   struct stat fst;
   long long n = now(), endtime = n + stime;

   while (n < endtime) {
     int s = endtime - n;
     usleep(s * 1000);

     if (got_signal)
       break;

     // check on the parent
     assert(p_pid > 0);
     if (kill(p_pid, 0) == -1) {
       if (errno == ESRCH) {
         fprintf(stderr, "alivemonitor: parent pid %d exited.\n", p_pid);
         return EXITED;
       } else {
         perror("alivemonitor: kill(p_pid, 0) failed");
         return ERROR;
       }
     }
     n = now();
   }

   memset(&fst, 0, sizeof(fst));
   if (stat(keepalive_file, &fst) != 0) {
     perror("alivemonitor: stat failed");
     return ERROR;
   }

   if (fst.st_mtime == old_time) {
     return NO_CHANGE;
   }

   // alive!
   old_time = fst.st_mtime;
   return ALIVE;
 }

 void die(const char *argv0, const char *msg) {
   fprintf(stderr, "%s: %s\n", argv0, msg);
   exit(99);
 }

 int main(int argc, char *const *argv) {
   int fd;
   long long timeout, first_check, incr_check, next_check;
   struct stat fst;
   mode_t old_mask;
   pid_t pid;
   long long start_time;
   char *keepalive_name;
   int prekill_signal = 0;
   long long prekill_timeout = 1000;

   if (argc < 6) {
     usage(basename(argv[0]));
     return 99;
   }

   signal(SIGTERM, sighandler);
   signal(SIGHUP, sighandler);

   // GNU getopt() will helpfully try to grab options from the [args...]
   // section unless we set this.  We want those options to be set aside
   // for the subprogram, not for us.
   int opt;
   while ((opt = getopt(argc, argv, "+?S:T:")) > 0) {
     switch (opt) {
     case 'S':
       prekill_signal = atoi(optarg);
       if (prekill_signal <= 0) die(argv[0], "invalid signal number provided");
       break;
     case 'T':
       prekill_timeout = parse_to_msec(optarg);
       if (prekill_timeout <= 0) die(argv[0], "prekill timeout must be > 0");
       break;
     case '?':
       usage(basename(argv[0]));
       return 99;
     }
   }

   // <keepalive_file> <first_check> <incr_checks> <timeout> <command>
   keepalive_file = argv[optind];
   keepalive_name = basename(keepalive_file);
   first_check = parse_to_msec(argv[optind + 1]);
   incr_check = parse_to_msec(argv[optind + 2]);
   timeout = parse_to_msec(argv[optind + 3]);

   if (first_check <= 0) die(argv[0], "first_check must be > 0");
   if (incr_check <= 0) die(argv[0], "incr_check must be > 0");
   if (timeout <= 0) die(argv[0], "timeout must be > 0");
   if (first_check > timeout) die(argv[0], "first_check must be <= timeout");

   // create the keepalive file if it doesn't already exist
   memset(&fst, 0, sizeof(fst));
   if (stat(keepalive_file, &fst) != 0) {
     old_mask = umask(0000);
     fd = creat(keepalive_file, 0666);
     if (fd < 0) {
       perror("alivemonitor: creat failed");
       return 99;
     }
     // Revert the umask to default so that the child doesn't
     // inherit the changed value.
     umask(old_mask);
     close(fd);
   }
   old_time = fst.st_mtime;

   fprintf(stderr, "alivemonitor: Start monitoring '%s' with timeout=%lldms, "
           "first_check=%lldms, incr_check=%lldms\n",
           keepalive_file, timeout, first_check, incr_check);

   // create a new process group with pgid=pid
   if (setpgid(0, 0)) {
     perror("alivemonitor: setpgid failed");
     return 99;
   }

   // spawn the child process
   p_pid = getpid();
   pid = fork();
   if (pid == -1) {
     perror("alivemonitor: fork failed");
     return 99;
   } else if (pid > 0) { // parent
     execvp(argv[optind + 4], argv + optind + 4);
     perror("alivemonitor: execv failed");
     return 99;
   }

   // from here: child

   while (1) {
     start_time = now();

     // sleep until first check
     switch (sleep_check_alive(first_check)) {
     case EXITED: return 0;
     case ERROR: goto kill_it;
     case ALIVE: goto not_dead;
     case NO_CHANGE: break;  // fall through and enter the inner loop
     }

     // no sign of life yet, run the increments
     long long time_passed = now() - start_time;
     int cnt = 1;
     while (1) {
       if (got_signal) {
         fprintf(stderr, "alivemonitor(%s): signal %d received, killing.\n",
                 keepalive_name, got_signal);
         goto kill_it;
       } else if (time_passed >= timeout) {
         fprintf(stderr, "alivemonitor(%s): Timeout!\n", keepalive_name);
         goto kill_it;
       }
       fprintf(stderr, "alivemonitor(%s): %d-No sign of life @ %lld/%lld ms\n",
               keepalive_name, cnt++, time_passed, timeout);
       next_check = timeout - time_passed;
       if (incr_check < next_check) next_check = incr_check;
       switch (sleep_check_alive(next_check)) {
       case EXITED: return 0;
       case ERROR: goto kill_it;
       case NO_CHANGE: break;  // do nothing
       case ALIVE:
         fprintf(stderr, "alivemonitor(%s): it's alive after all!\n",
                 keepalive_name);
         goto not_dead;
       }
       time_passed = now() - start_time;
     }
 not_dead:
     continue;
   }

 kill_it:
   fprintf(stderr, "alivemonitor(%s): kill parent process group %d\n",
           keepalive_name, p_pid);
   assert(p_pid > 0);
   if (prekill_signal) {
     // Send prekill signal only to the parent process (which might kill the
     // rest of its group politely)
     long long prekill_start = now();
     if (kill(p_pid, prekill_signal)) {
       if (errno != ESRCH) perror("alivemonitor: prekill failed");
     } else {
       do {
         if (kill(p_pid, 0)) {
           if (errno != ESRCH) perror("alivemonitor: prekill(0) failed");
           break;
         }
         usleep(100*1000);
       } while (now() - prekill_start < prekill_timeout);
     }
   }

   // Send kill signal to whole process group.
   if (kill(-p_pid, SIGKILL))
     perror("alivemonitor: killing parent process group failed");

   // NOTE: Code after this point will not run since we just killed ourselves

   return 98;
 }
	/*
	* Copyright 2012-2014 Google Inc. All rights reserved.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include <assert.h>
	#include <errno.h>
	#include <fcntl.h>
	#ifdef __ANDROID__
	#include <libgen.h> // For basename() on Android.
	#endif
	#include <limits.h>
	#include <signal.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <sys/stat.h>
	#include <sys/types.h>
	#include <sys/wait.h>
	#include <time.h>
	#include <unistd.h>


	static volatile sig_atomic_t got_signal = 0;
	const char *keepalive_file;
	pid_t p_pid;
	time_t old_time;


	void sighandler(int sig) {
	got_signal = sig;
	}

	static void usage(char *name) {
	fprintf(stderr,
	"Usage: %s [-S <prekill_signal> [-T <prekill_timeout>]]\n"
	" <keepalive_file> <first_check> <incr_checks>\n"
	" <timeout> <command> [args...]\n"
	" -S <prekill_signal> try this signal (numeric) before SIGKILL\n"
	" -T <prekill_timeout> wait time (secs) after prekill_signal\n"
	" <keepalive_file> name of the stamp file to monitor\n"
	" <first_check> time (secs) before first check\n"
	" <incr_checks> time (secs) before subsequent checks\n"
	" <timeout> time (secs) before killing process\n"
	" <command> [args...] the command to kill upon timeout\n"
	"\n"
	" The keepalive logic runs in cycles. A cycle begins and ends\n"
	" with a successful check of the <keepalive_file>, i.e., it was\n"
	" touched since the last cycle. The first check starts\n"
	" <first_check> secs after the cycle begins. Incremental checks\n"
	" are done at <incr_checks> intervals, until <keepalive_file>\n"
	" was found to be updated or <timeout> is reached. In the\n"
	" former case, the cycle restarts, while in the latter\n"
	" (timeout) case, the process is restarted and the cycle starts\n"
	" again.\n\n", name);
	}

	long long parse_to_msec(const char *str) {
	return atof(str) * 1000;
	}

	// return the current (monotonic) time in secs
	long long now() {
	struct timespec tp;

	if (clock_gettime(CLOCK_MONOTONIC, &tp)) {
	perror("alivemonitor: clock_gettime failed.");
	exit(1);
	}
	return tp.tv_sec * 1000 + (tp.tv_nsec / 1000000);
	}

	enum Aliveness {
	EXITED = 2,
	NO_CHANGE = 1,
	ALIVE = 0,
	ERROR = -1,
	};

	// Sleep a given amount of time, while continuously checking on the parent.
	// Return codes:
	// EXITED: parent exited
	// NO_CHANGE: no change in alive status
	// ALIVE: alive!
	// ERROR: system error, abort
	enum Aliveness sleep_check_alive(long long stime) {
	struct stat fst;
	long long n = now(), endtime = n + stime;

	while (n < endtime) {
	int s = endtime - n;
	usleep(s * 1000);

	if (got_signal)
	break;

	// check on the parent
	assert(p_pid > 0);
	if (kill(p_pid, 0) == -1) {
	if (errno == ESRCH) {
	fprintf(stderr, "alivemonitor: parent pid %d exited.\n", p_pid);
	return EXITED;
	} else {
	perror("alivemonitor: kill(p_pid, 0) failed");
	return ERROR;
	}
	}
	n = now();
	}

	memset(&fst, 0, sizeof(fst));
	if (stat(keepalive_file, &fst) != 0) {
	perror("alivemonitor: stat failed");
	return ERROR;
	}

	if (fst.st_mtime == old_time) {
	return NO_CHANGE;
	}

	// alive!
	old_time = fst.st_mtime;
	return ALIVE;
	}

	void die(const char argv0, const char msg) {
	fprintf(stderr, "%s: %s\n", argv0, msg);
	exit(99);
	}

	int main(int argc, char const argv) {
	int fd;
	long long timeout, first_check, incr_check, next_check;
	struct stat fst;
	mode_t old_mask;
	pid_t pid;
	long long start_time;
	char *keepalive_name;
	int prekill_signal = 0;
	long long prekill_timeout = 1000;

	if (argc < 6) {
	usage(basename(argv[0]));
	return 99;
	}

	signal(SIGTERM, sighandler);
	signal(SIGHUP, sighandler);

	// GNU getopt() will helpfully try to grab options from the [args...]
	// section unless we set this. We want those options to be set aside
	// for the subprogram, not for us.
	int opt;
	while ((opt = getopt(argc, argv, "+?S:T:")) > 0) {
	switch (opt) {
	case 'S':
	prekill_signal = atoi(optarg);
	if (prekill_signal <= 0) die(argv[0], "invalid signal number provided");
	break;
	case 'T':
	prekill_timeout = parse_to_msec(optarg);
	if (prekill_timeout <= 0) die(argv[0], "prekill timeout must be > 0");
	break;
	case '?':
	usage(basename(argv[0]));
	return 99;
	}
	}

	// <keepalive_file> <first_check> <incr_checks> <timeout> <command>
	keepalive_file = argv[optind];
	keepalive_name = basename(keepalive_file);
	first_check = parse_to_msec(argv[optind + 1]);
	incr_check = parse_to_msec(argv[optind + 2]);
	timeout = parse_to_msec(argv[optind + 3]);

	if (first_check <= 0) die(argv[0], "first_check must be > 0");
	if (incr_check <= 0) die(argv[0], "incr_check must be > 0");
	if (timeout <= 0) die(argv[0], "timeout must be > 0");
	if (first_check > timeout) die(argv[0], "first_check must be <= timeout");

	// create the keepalive file if it doesn't already exist
	memset(&fst, 0, sizeof(fst));
	if (stat(keepalive_file, &fst) != 0) {
	old_mask = umask(0000);
	fd = creat(keepalive_file, 0666);
	if (fd < 0) {
	perror("alivemonitor: creat failed");
	return 99;
	}
	// Revert the umask to default so that the child doesn't
	// inherit the changed value.
	umask(old_mask);
	close(fd);
	}
	old_time = fst.st_mtime;

	fprintf(stderr, "alivemonitor: Start monitoring '%s' with timeout=%lldms, "
	"first_check=%lldms, incr_check=%lldms\n",
	keepalive_file, timeout, first_check, incr_check);

	// create a new process group with pgid=pid
	if (setpgid(0, 0)) {
	perror("alivemonitor: setpgid failed");
	return 99;
	}

	// spawn the child process
	p_pid = getpid();
	pid = fork();
	if (pid == -1) {
	perror("alivemonitor: fork failed");
	return 99;
	} else if (pid > 0) { // parent
	execvp(argv[optind + 4], argv + optind + 4);
	perror("alivemonitor: execv failed");
	return 99;
	}

	// from here: child

	while (1) {
	start_time = now();

	// sleep until first check
	switch (sleep_check_alive(first_check)) {
	case EXITED: return 0;
	case ERROR: goto kill_it;
	case ALIVE: goto not_dead;
	case NO_CHANGE: break; // fall through and enter the inner loop
	}

	// no sign of life yet, run the increments
	long long time_passed = now() - start_time;
	int cnt = 1;
	while (1) {
	if (got_signal) {
	fprintf(stderr, "alivemonitor(%s): signal %d received, killing.\n",
	keepalive_name, got_signal);
	goto kill_it;
	} else if (time_passed >= timeout) {
	fprintf(stderr, "alivemonitor(%s): Timeout!\n", keepalive_name);
	goto kill_it;
	}
	fprintf(stderr, "alivemonitor(%s): %d-No sign of life @ %lld/%lld ms\n",
	keepalive_name, cnt++, time_passed, timeout);
	next_check = timeout - time_passed;
	if (incr_check < next_check) next_check = incr_check;
	switch (sleep_check_alive(next_check)) {
	case EXITED: return 0;
	case ERROR: goto kill_it;
	case NO_CHANGE: break; // do nothing
	case ALIVE:
	fprintf(stderr, "alivemonitor(%s): it's alive after all!\n",
	keepalive_name);
	goto not_dead;
	}
	time_passed = now() - start_time;
	}
	not_dead:
	continue;
	}

	kill_it:
	fprintf(stderr, "alivemonitor(%s): kill parent process group %d\n",
	keepalive_name, p_pid);
	assert(p_pid > 0);
	if (prekill_signal) {
	// Send prekill signal only to the parent process (which might kill the
	// rest of its group politely)
	long long prekill_start = now();
	if (kill(p_pid, prekill_signal)) {
	if (errno != ESRCH) perror("alivemonitor: prekill failed");
	} else {
	do {
	if (kill(p_pid, 0)) {
	if (errno != ESRCH) perror("alivemonitor: prekill(0) failed");
	break;
	}
	usleep(100*1000);
	} while (now() - prekill_start < prekill_timeout);
	}
	}

	// Send kill signal to whole process group.
	if (kill(-p_pid, SIGKILL))
	perror("alivemonitor: killing parent process group failed");

	// NOTE: Code after this point will not run since we just killed ourselves

	return 98;
	}