board/xilinx/xilinx_iic/xiic_l.h - uboot/windcharger - Git at Google

 /* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
 /*****************************************************************************
 *
 *	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
 *	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
 *	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
 *	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
 *	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
 *	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
 *	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
 *	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
 *	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
 *	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
 *	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
 *	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *	FOR A PARTICULAR PURPOSE.
 *
 *	(c) Copyright 2002 Xilinx Inc.
 *	All rights reserved.
 *
 *****************************************************************************/
 /****************************************************************************/
 /**
 *
 * @file xiic_l.h
 *
 * This header file contains identifiers and low-level driver functions (or
 * macros) that can be used to access the device.  High-level driver functions
 * are defined in xiic.h.
 *
 * <pre>
 * MODIFICATION HISTORY:
 *
 * Ver	Who  Date     Changes
 * ----- ---- -------- -----------------------------------------------
 * 1.00b jhl  05/07/02 First release
 * 1.01c ecm  12/05/02 new rev
 * </pre>
 *
 *****************************************************************************/

 #ifndef XIIC_L_H /* prevent circular inclusions */
 #define XIIC_L_H /* by using protection macros */

 /***************************** Include Files ********************************/

 #include "xbasic_types.h"

 /************************** Constant Definitions ****************************/

 #define XIIC_MSB_OFFSET		       3

 #define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET

 /*
  * Register offsets in bytes from RegisterBase. Three is added to the
  * base offset to access LSB (IBM style) of the word
  */
 #define XIIC_CR_REG_OFFSET   0x00+XIIC_REG_OFFSET   /* Control Register	  */
 #define XIIC_SR_REG_OFFSET   0x04+XIIC_REG_OFFSET   /* Status Register	  */
 #define XIIC_DTR_REG_OFFSET  0x08+XIIC_REG_OFFSET   /* Data Tx Register	  */
 #define XIIC_DRR_REG_OFFSET  0x0C+XIIC_REG_OFFSET   /* Data Rx Register	  */
 #define XIIC_ADR_REG_OFFSET  0x10+XIIC_REG_OFFSET   /* Address Register	  */
 #define XIIC_TFO_REG_OFFSET  0x14+XIIC_REG_OFFSET   /* Tx FIFO Occupancy  */
 #define XIIC_RFO_REG_OFFSET  0x18+XIIC_REG_OFFSET   /* Rx FIFO Occupancy  */
 #define XIIC_TBA_REG_OFFSET  0x1C+XIIC_REG_OFFSET   /* 10 Bit Address reg */
 #define XIIC_RFD_REG_OFFSET  0x20+XIIC_REG_OFFSET   /* Rx FIFO Depth reg  */

 /* Control Register masks */

 #define XIIC_CR_ENABLE_DEVICE_MASK	  0x01	/* Device enable = 1	  */
 #define XIIC_CR_TX_FIFO_RESET_MASK	  0x02	/* Transmit FIFO reset=1  */
 #define XIIC_CR_MSMS_MASK		  0x04	/* Master starts Txing=1  */
 #define XIIC_CR_DIR_IS_TX_MASK		  0x08	/* Dir of tx. Txing=1	  */
 #define XIIC_CR_NO_ACK_MASK		  0x10	/* Tx Ack. NO ack = 1	  */
 #define XIIC_CR_REPEATED_START_MASK	  0x20	/* Repeated start = 1	  */
 #define XIIC_CR_GENERAL_CALL_MASK	  0x40	/* Gen Call enabled = 1	  */

 /* Status Register masks */

 #define XIIC_SR_GEN_CALL_MASK		  0x01	/* 1=a mstr issued a GC	  */
 #define XIIC_SR_ADDR_AS_SLAVE_MASK	  0x02	/* 1=when addr as slave	  */
 #define XIIC_SR_BUS_BUSY_MASK		  0x04	/* 1 = bus is busy	  */
 #define XIIC_SR_MSTR_RDING_SLAVE_MASK	  0x08	/* 1=Dir: mstr <-- slave  */
 #define XIIC_SR_TX_FIFO_FULL_MASK	  0x10	/* 1 = Tx FIFO full	  */
 #define XIIC_SR_RX_FIFO_FULL_MASK	  0x20	/* 1 = Rx FIFO full	  */
 #define XIIC_SR_RX_FIFO_EMPTY_MASK	  0x40	/* 1 = Rx FIFO empty	  */

 /* IPIF Interrupt Status Register masks	   Interrupt occurs when...	  */

 #define XIIC_INTR_ARB_LOST_MASK		  0x01	/* 1 = arbitration lost	  */
 #define XIIC_INTR_TX_ERROR_MASK		  0x02	/* 1=Tx error/msg complete*/
 #define XIIC_INTR_TX_EMPTY_MASK		  0x04	/* 1 = Tx FIFO/reg empty  */
 #define XIIC_INTR_RX_FULL_MASK		  0x08	/* 1=Rx FIFO/reg=OCY level*/
 #define XIIC_INTR_BNB_MASK		  0x10	/* 1 = Bus not busy	  */
 #define XIIC_INTR_AAS_MASK		  0x20	/* 1 = when addr as slave */
 #define XIIC_INTR_NAAS_MASK		  0x40	/* 1 = not addr as slave  */
 #define XIIC_INTR_TX_HALF_MASK		  0x80	/* 1 = TX FIFO half empty */

 /* IPIF Device Interrupt Register masks */

 #define XIIC_IPIF_IIC_MASK	    0x00000004UL    /* 1=inter enabled */
 #define XIIC_IPIF_ERROR_MASK	    0x00000001UL    /* 1=inter enabled */
 #define XIIC_IPIF_INTER_ENABLE_MASK  (XIIC_IPIF_IIC_MASK |  \
 				      XIIC_IPIF_ERROR_MASK)

 #define XIIC_TX_ADDR_SENT	      0x00
 #define XIIC_TX_ADDR_MSTR_RECV_MASK   0x02

 /* The following constants specify the depth of the FIFOs */

 #define IIC_RX_FIFO_DEPTH	  16   /* Rx fifo capacity		 */
 #define IIC_TX_FIFO_DEPTH	  16   /* Tx fifo capacity		 */

 /* The following constants specify groups of interrupts that are typically
  * enabled or disables at the same time
  */
 #define XIIC_TX_INTERRUPTS					    \
 	    (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK |    \
 	     XIIC_INTR_TX_HALF_MASK)

 #define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)

 /* The following constants are used with the following macros to specify the
  * operation, a read or write operation.
  */
 #define XIIC_READ_OPERATION  1
 #define XIIC_WRITE_OPERATION 0

 /* The following constants are used with the transmit FIFO fill function to
  * specify the role which the IIC device is acting as, a master or a slave.
  */
 #define XIIC_MASTER_ROLE     1
 #define XIIC_SLAVE_ROLE	     0

 /**************************** Type Definitions ******************************/


 /***************** Macros (Inline Functions) Definitions ********************/


 /************************** Function Prototypes *****************************/

 unsigned XIic_Recv(u32 BaseAddress, u8 Address,
 		   u8 *BufferPtr, unsigned ByteCount);

 unsigned XIic_Send(u32 BaseAddress, u8 Address,
 		   u8 *BufferPtr, unsigned ByteCount);

 #endif		  /* end of protection macro */
	/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
	/*****************************************************************************
	*
	* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
	* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
	* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
	* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
	* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
	* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
	* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
	* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
	* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
	* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
	* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
	* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
	* FOR A PARTICULAR PURPOSE.
	*
	* (c) Copyright 2002 Xilinx Inc.
	* All rights reserved.
	*
	*****************************************************************************/
	/****************************************************************************/
	/**
	*
	* @file xiic_l.h
	*
	* This header file contains identifiers and low-level driver functions (or
	* macros) that can be used to access the device. High-level driver functions
	* are defined in xiic.h.
	*
	* <pre>
	* MODIFICATION HISTORY:
	*
	* Ver Who Date Changes
	* ----- ---- -------- -----------------------------------------------
	* 1.00b jhl 05/07/02 First release
	* 1.01c ecm 12/05/02 new rev
	* </pre>
	*
	*****************************************************************************/

	#ifndef XIIC_L_H /* prevent circular inclusions */
	#define XIIC_L_H /* by using protection macros */

	/*************************** Include Files ******************************/

	#include "xbasic_types.h"

	/************************ Constant Definitions **************************/

	#define XIIC_MSB_OFFSET 3

	#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET

	/*
	* Register offsets in bytes from RegisterBase. Three is added to the
	* base offset to access LSB (IBM style) of the word
	*/
	#define XIIC_CR_REG_OFFSET 0x00+XIIC_REG_OFFSET /* Control Register */
	#define XIIC_SR_REG_OFFSET 0x04+XIIC_REG_OFFSET /* Status Register */
	#define XIIC_DTR_REG_OFFSET 0x08+XIIC_REG_OFFSET /* Data Tx Register */
	#define XIIC_DRR_REG_OFFSET 0x0C+XIIC_REG_OFFSET /* Data Rx Register */
	#define XIIC_ADR_REG_OFFSET 0x10+XIIC_REG_OFFSET /* Address Register */
	#define XIIC_TFO_REG_OFFSET 0x14+XIIC_REG_OFFSET /* Tx FIFO Occupancy */
	#define XIIC_RFO_REG_OFFSET 0x18+XIIC_REG_OFFSET /* Rx FIFO Occupancy */
	#define XIIC_TBA_REG_OFFSET 0x1C+XIIC_REG_OFFSET /* 10 Bit Address reg */
	#define XIIC_RFD_REG_OFFSET 0x20+XIIC_REG_OFFSET /* Rx FIFO Depth reg */

	/* Control Register masks */

	#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
	#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
	#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
	#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
	#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
	#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
	#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */

	/* Status Register masks */

	#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
	#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
	#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
	#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
	#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
	#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
	#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */

	/* IPIF Interrupt Status Register masks Interrupt occurs when... */

	#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
	#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete*/
	#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
	#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level*/
	#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
	#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
	#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
	#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */

	/* IPIF Device Interrupt Register masks */

	#define XIIC_IPIF_IIC_MASK 0x00000004UL /* 1=inter enabled */
	#define XIIC_IPIF_ERROR_MASK 0x00000001UL /* 1=inter enabled */
	#define XIIC_IPIF_INTER_ENABLE_MASK (XIIC_IPIF_IIC_MASK \| \
	XIIC_IPIF_ERROR_MASK)

	#define XIIC_TX_ADDR_SENT 0x00
	#define XIIC_TX_ADDR_MSTR_RECV_MASK 0x02

	/* The following constants specify the depth of the FIFOs */

	#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
	#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */

	/* The following constants specify groups of interrupts that are typically
	* enabled or disables at the same time
	*/
	#define XIIC_TX_INTERRUPTS \
	(XIIC_INTR_TX_ERROR_MASK \| XIIC_INTR_TX_EMPTY_MASK \| \
	XIIC_INTR_TX_HALF_MASK)

	#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK \| XIIC_TX_INTERRUPTS)

	/* The following constants are used with the following macros to specify the
	* operation, a read or write operation.
	*/
	#define XIIC_READ_OPERATION 1
	#define XIIC_WRITE_OPERATION 0

	/* The following constants are used with the transmit FIFO fill function to
	* specify the role which the IIC device is acting as, a master or a slave.
	*/
	#define XIIC_MASTER_ROLE 1
	#define XIIC_SLAVE_ROLE 0

	/************************** Type Definitions ****************************/


	/*************** Macros (Inline Functions) Definitions ******************/


	/************************ Function Prototypes ***************************/

	unsigned XIic_Recv(u32 BaseAddress, u8 Address,
	u8 *BufferPtr, unsigned ByteCount);

	unsigned XIic_Send(u32 BaseAddress, u8 Address,
	u8 *BufferPtr, unsigned ByteCount);

	#endif /* end of protection macro */