| # |
| # (C) Copyright 2000-2006 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # Copyright (c) 2013 Qualcomm Atheros, Inc. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundation; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| CFG_BOARD_TYPE = ap143 |
| export BUILD_TYPE=jffs2 |
| |
| include ./config.board953x |
| |
| VERSION = 1 |
| PATCHLEVEL = 1 |
| SUBLEVEL = 4 |
| EXTRAVERSION = |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| VERSION_FILE = include/version_autogenerated.h |
| EXT_ADDR_SUPPORT = 1 |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/i386/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/powerpc/ppc/ \ |
| -e s/macppc/ppc/) |
| |
| HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| export HOSTARCH HOSTOS |
| |
| # Deal with colliding definitions from tcsh etc. |
| VENDOR= |
| |
| ######################################################################### |
| |
| TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) |
| export TOPDIR |
| |
| ifndef COMPRESSED_UBOOT |
| COMPRESSED_UBOOT = 0 |
| endif |
| |
| ifeq (include/config.mk,$(wildcard include/config.mk)) |
| # load ARCH, BOARD, and CPU configuration |
| include include/config.mk |
| export ARCH CPU BOARD VENDOR SOC |
| ifndef CROSS_COMPILE |
| ifeq ($(HOSTARCH),ppc) |
| CROSS_COMPILE = |
| else |
| ifeq ($(ARCH),ppc) |
| CROSS_COMPILE = powerpc-linux- |
| endif |
| ifeq ($(ARCH),arm) |
| CROSS_COMPILE = arm-linux- |
| endif |
| ifeq ($(ARCH),i386) |
| ifeq ($(HOSTARCH),i386) |
| CROSS_COMPILE = |
| else |
| CROSS_COMPILE = i386-linux- |
| endif |
| endif |
| ifeq ($(ARCH),mips) |
| CROSS_COMPILE = mips-qca-linux-uclibc- |
| endif |
| ifeq ($(ARCH),nios) |
| CROSS_COMPILE = nios-elf- |
| endif |
| ifeq ($(ARCH),nios2) |
| CROSS_COMPILE = nios2-elf- |
| endif |
| ifeq ($(ARCH),m68k) |
| CROSS_COMPILE = m68k-elf- |
| endif |
| ifeq ($(ARCH),microblaze) |
| CROSS_COMPILE = mb- |
| endif |
| ifeq ($(ARCH),blackfin) |
| CROSS_COMPILE = bfin-elf- |
| endif |
| endif |
| endif |
| |
| export CROSS_COMPILE |
| |
| # load other configuration |
| include $(TOPDIR)/config.mk |
| |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| OBJS = cpu/$(CPU)/start.o |
| |
| ifeq ($(COMPRESSED_UBOOT),1) |
| OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o |
| endif |
| |
| ifeq ($(CPU),i386) |
| OBJS += cpu/$(CPU)/start16.o |
| OBJS += cpu/$(CPU)/reset.o |
| endif |
| ifeq ($(CPU),ppc4xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| ifeq ($(CPU),mpc83xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| ifeq ($(CPU),mpc85xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| ifeq ($(CPU),bf533) |
| OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o |
| OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o |
| endif |
| |
| LIBS = lib_generic/libgeneric.a |
| LIBS += common/libcommon.a |
| LIBS += board/$(BOARDDIR)/lib$(BOARD).a |
| LIBS += cpu/$(CPU)/lib$(CPU).a |
| ifdef SOC |
| LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a |
| endif |
| LIBS += lib_$(ARCH)/lib$(ARCH).a |
| |
| #ifeq ($(KERNELVER),2.6.31) |
| LIBS += drivers/libdrivers.a |
| #endif |
| #ifeq ($(COMPRESSED_UBOOT),0) |
| #LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ |
| # fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a |
| #LIBS += disk/libdisk.a |
| #LIBS += dtt/libdtt.a |
| #ifneq ($(KERNELVER),2.6.31) |
| #LIBS += drivers/libdrivers.a |
| #endif |
| #LIBS += drivers/sk98lin/libsk98lin.a |
| #endif |
| |
| LIBS += net/libnet.a |
| LIBS += rtc/librtc.a |
| #LIBS += post/libpost.a post/cpu/libcpu.a |
| LIBS += $(BOARDLIBS) |
| |
| ifeq ($(COMPRESSED_UBOOT),1) |
| LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a |
| #LIBS_BOOTSTRAP += lib_$(CPU)/lib$(CPU).a |
| LIBS_BOOTSTRAP += board/$(BOARDDIR)/lib$(BOARD).a |
| LIBS_BOOTSTRAP += cpu/$(CPU)/lib$(CPU).a |
| ifneq ($(SOC),) |
| LIBS_BOOTSTRAP += cpu/$(CPU)/$(SOC)/lib$(SOC).a |
| endif |
| endif |
| .PHONY : $(LIBS) |
| |
| ifeq ($(COMPRESSED_UBOOT),1) |
| .PHONY : $(LIBS_BOOTSTRAP) |
| endif |
| |
| # Add GCC lib |
| PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc |
| |
| |
| # The "tools" are needed early, so put this first |
| # Don't include stuff already done in $(LIBS) |
| SUBDIRS = tools \ |
| post \ |
| post/cpu |
| .PHONY : $(SUBDIRS) |
| |
| ######################################################################### |
| ######################################################################### |
| |
| ALL = u-boot.srec u-boot.bin System.map |
| |
| ifeq ($(COMPRESSED_UBOOT),1) |
| all: $(ALL) tuboot.bin |
| else |
| all: $(ALL) |
| endif |
| |
| u-boot.hex: u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ |
| |
| u-boot.srec: u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ |
| |
| u-boot.bin: u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| |
| u-boot.img: u-boot.bin |
| ./tools/mkimage -A $(ARCH) -T firmware -C none \ |
| -a $(TEXT_BASE) -e 0 \ |
| -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ |
| sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ |
| -d $< $@ |
| |
| u-boot.dis: u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| U_BOOT_MAIN_DEPS = $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) \ |
| board/atheros/board953x/extra.o |
| |
| $(U_BOOT_MAIN_DEPS): version |
| |
| u-boot: depend $(U_BOOT_MAIN_DEPS) |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) $(BOARD_EXTRA_OBJS) board/atheros/board953x/extra.o \ |
| --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ |
| -Map u-boot.map -o u-boot |
| |
| $(LIBS): |
| $(MAKE) -C `dirname $@` |
| |
| $(SUBDIRS): |
| $(MAKE) -C $@ all |
| |
| ifeq ($(COMPRESSED_UBOOT),1) |
| |
| LZMA = $(BUILD_DIR)/util/lzma |
| |
| tuboot.bin: System.map bootstrap.bin u-boot.lzimg |
| @cat bootstrap.bin > $@ |
| @cat u-boot.lzimg >> $@ |
| |
| u-boot.lzimg: $(obj)u-boot.bin System.map |
| @$(LZMA) e $(obj)u-boot.bin u-boot.bin.lzma |
| @./tools/mkimage -A mips -T firmware -C lzma \ |
| -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \ |
| -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \ |
| -n 'u-boot image' -d $(obj)u-boot.bin.lzma $@ |
| |
| bootstrap.bin: bootstrap |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| |
| bootstrap: depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LDSCRIPT_BOOTSTRAP) |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \ |
| --start-group $(LIBS_BOOTSTRAP) --end-group $(PLATFORM_LIBS) \ |
| -Map bootstrap.map -o bootstrap |
| |
| $(LIBS_BOOTSTRAP): |
| $(MAKE) -C `dirname $@` |
| endif |
| |
| version: |
| @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ |
| echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \ |
| echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \ |
| $(TOPDIR)) >> $(VERSION_FILE); \ |
| echo "\"" >> $(VERSION_FILE) |
| |
| gdbtools: |
| $(MAKE) -C tools/gdb || exit 1 |
| |
| depend dep: |
| @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done |
| |
| tags: |
| ctags -w `find $(SUBDIRS) include \ |
| lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ |
| fs/cramfs fs/fat fs/fdos fs/jffs2 \ |
| net disk rtc dtt drivers drivers/sk98lin common \ |
| \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` |
| |
| etags: |
| etags -a `find $(SUBDIRS) include \ |
| lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ |
| fs/cramfs fs/fat fs/fdos fs/jffs2 \ |
| net disk rtc dtt drivers drivers/sk98lin common \ |
| \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` |
| |
| System.map: u-boot |
| @$(NM) $< | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| sort > System.map |
| |
| env: |
| $(MAKE) HOST_CFLAGS="-I$(TOPDIR)/include $(HOSTCFLAGS)" -C tools/env || exit 1 |
| |
| ######################################################################### |
| else |
| all install u-boot u-boot.srec depend dep: |
| @echo "System not configured - see README" >&2 |
| @ exit 1 |
| endif |
| |
| ######################################################################### |
| |
| unconfig: |
| @rm -f include/config.h include/config.mk board/*/config.tmp |
| |
| #======================================================================== |
| # PowerPC |
| #======================================================================== |
| |
| ######################################################################### |
| ## MPC5xx Systems |
| ######################################################################### |
| |
| canmb_config: unconfig |
| @./mkconfig -a canmb ppc mpc5xxx canmb |
| |
| cmi_mpc5xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc5xx cmi |
| |
| PATI_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc5xx pati mpl |
| |
| ######################################################################### |
| ## MPC5xxx Systems |
| ######################################################################### |
| |
| aev_config: unconfig |
| @./mkconfig -a aev ppc mpc5xxx tqm5200 |
| |
| cpci5200_config: unconfig |
| @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd |
| |
| hmi1001_config: unconfig |
| @./mkconfig hmi1001 ppc mpc5xxx hmi1001 |
| |
| Lite5200_config \ |
| Lite5200_LOWBOOT_config \ |
| Lite5200_LOWBOOT08_config \ |
| icecube_5200_config \ |
| icecube_5200_LOWBOOT_config \ |
| icecube_5200_LOWBOOT08_config \ |
| icecube_5200_DDR_config \ |
| icecube_5200_DDR_LOWBOOT_config \ |
| icecube_5200_DDR_LOWBOOT08_config \ |
| icecube_5100_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| { if [ "$(findstring DDR,$@)" ] ; \ |
| then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ |
| else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ |
| fi ; \ |
| echo "... with LOWBOOT configuration" ; \ |
| } |
| @[ -z "$(findstring LOWBOOT08,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ |
| echo "... with 8 MB flash only" ; \ |
| echo "... with LOWBOOT configuration" ; \ |
| } |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ |
| echo "... DDR memory revision" ; \ |
| } |
| @[ -z "$(findstring 5200,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200" >>include/config.h ; \ |
| echo "... with MPC5200 processor" ; \ |
| } |
| @[ -z "$(findstring 5100,$@)" ] || \ |
| { echo "#define CONFIG_MGT5100" >>include/config.h ; \ |
| echo "... with MGT5100 processor" ; \ |
| } |
| @./mkconfig -a IceCube ppc mpc5xxx icecube |
| |
| inka4x0_config: unconfig |
| @./mkconfig inka4x0 ppc mpc5xxx inka4x0 |
| |
| lite5200b_config \ |
| lite5200b_LOWBOOT_config: unconfig |
| @ >include/config.h |
| @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h |
| @ echo "... DDR memory revision" |
| @ echo "#define CONFIG_MPC5200" >>include/config.h |
| @ echo "#define CONFIG_LITE5200B" >>include/config.h |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ |
| echo "... with LOWBOOT configuration" ; \ |
| } |
| @ echo "... with MPC5200B processor" |
| @./mkconfig -a IceCube ppc mpc5xxx icecube |
| |
| mcc200_config \ |
| mcc200_lowboot_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFE000000" >board/mcc200/config.tmp ; \ |
| echo "... with lowboot configuration" ; \ |
| } |
| @./mkconfig mcc200 ppc mpc5xxx mcc200 |
| |
| o2dnt_config: |
| @./mkconfig o2dnt ppc mpc5xxx o2dnt |
| |
| pf5200_config: unconfig |
| @./mkconfig pf5200 ppc mpc5xxx pf5200 esd |
| |
| PM520_config \ |
| PM520_DDR_config \ |
| PM520_ROMBOOT_config \ |
| PM520_ROMBOOT_DDR_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ |
| echo "... DDR memory revision" ; \ |
| } |
| @[ -z "$(findstring ROMBOOT,$@)" ] || \ |
| { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ |
| echo "... booting from 8-bit flash" ; \ |
| } |
| @./mkconfig -a PM520 ppc mpc5xxx pm520 |
| |
| smmaco4_config: unconfig |
| @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 |
| |
| spieval_config: unconfig |
| echo "#define CONFIG_CS_AUTOCONF">>include/config.h |
| echo "... with automatic CS configuration" |
| @./mkconfig -a spieval ppc mpc5xxx tqm5200 |
| |
| MINI5200_config \ |
| EVAL5200_config \ |
| TOP5200_config: unconfig |
| @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h |
| @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk |
| |
| Total5100_config \ |
| Total5200_config \ |
| Total5200_lowboot_config \ |
| Total5200_Rev2_config \ |
| Total5200_Rev2_lowboot_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring 5100,$@)" ] || \ |
| { echo "#define CONFIG_MGT5100" >>include/config.h ; \ |
| echo "... with MGT5100 processor" ; \ |
| } |
| @[ -z "$(findstring 5200,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200" >>include/config.h ; \ |
| echo "... with MPC5200 processor" ; \ |
| } |
| @[ -n "$(findstring Rev,$@)" ] || \ |
| { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ |
| echo "... revision 1 board" ; \ |
| } |
| @[ -z "$(findstring Rev2_,$@)" ] || \ |
| { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ |
| echo "... revision 2 board" ; \ |
| } |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ |
| echo "... with lowboot configuration" ; \ |
| } |
| @./mkconfig -a Total5200 ppc mpc5xxx total5200 |
| |
| TQM5200_auto_config \ |
| TQM5200_AA_config \ |
| TQM5200_AB_config \ |
| TQM5200_AC_config \ |
| MiniFAP_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring MiniFAP,$@)" ] || \ |
| { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ |
| echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ |
| echo "... TQM5200_AC on MiniFAP" ; \ |
| } |
| @[ -z "$(findstring AA,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \ |
| echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \ |
| } |
| @[ -z "$(findstring AB,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \ |
| echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \ |
| echo "... with Graphics Controller"; \ |
| } |
| @[ -z "$(findstring AC,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ |
| echo "... with 4 MB Flash, 128 MB SDRAM" ; \ |
| echo "... with Graphics Controller"; \ |
| } |
| @[ -z "$(findstring auto,$@)" ] || \ |
| { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \ |
| echo "... with automatic CS configuration" ; \ |
| } |
| @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 |
| |
| ######################################################################### |
| ## MPC8xx Systems |
| ######################################################################### |
| |
| Adder_config \ |
| Adder87x_config \ |
| AdderII_config \ |
| : unconfig |
| $(if $(findstring AdderII,$@), \ |
| @echo "#define CONFIG_MPC852T" > include/config.h) |
| @./mkconfig -a Adder ppc mpc8xx adder |
| |
| ADS860_config \ |
| FADS823_config \ |
| FADS850SAR_config \ |
| MPC86xADS_config \ |
| MPC885ADS_config \ |
| FADS860T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx fads |
| |
| AMX860_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel |
| |
| c2mon_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx c2mon |
| |
| CCM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens |
| |
| cogent_mpc8xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx cogent |
| |
| ELPT860_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX |
| |
| EP88x_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx ep88x |
| |
| ESTEEM192E_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx esteem192e |
| |
| ETX094_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx etx094 |
| |
| FLAGADM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx flagadm |
| |
| xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) |
| |
| GEN860T_SC_config \ |
| GEN860T_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _SC,$@)" ] || \ |
| { echo "#define CONFIG_SC" >>include/config.h ; \ |
| echo "With reduced H/W feature set (SC)..." ; \ |
| } |
| @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t |
| |
| GENIETV_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx genietv |
| |
| GTH_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx gth |
| |
| hermes_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx hermes |
| |
| HMI10_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx |
| |
| IAD210_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens |
| |
| xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) |
| |
| ICU862_100MHz_config \ |
| ICU862_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CONFIG_100MHz" >>include/config.h ; \ |
| echo "... with 100MHz system clock" ; \ |
| } |
| @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 |
| |
| IP860_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx ip860 |
| |
| IVML24_256_config \ |
| IVML24_128_config \ |
| IVML24_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring IVML24_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ |
| } |
| @./mkconfig -a IVML24 ppc mpc8xx ivm |
| |
| IVMS8_256_config \ |
| IVMS8_128_config \ |
| IVMS8_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring IVMS8_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ |
| } |
| @./mkconfig -a IVMS8 ppc mpc8xx ivm |
| |
| KUP4K_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup |
| |
| KUP4X_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup |
| |
| LANTEC_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx lantec |
| |
| lwmon_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx lwmon |
| |
| MBX_config \ |
| MBX860T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx |
| |
| MHPC_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec |
| |
| MVS1_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mvs1 |
| |
| xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETVIA_V2_config \ |
| NETVIA_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring NETVIA_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ |
| echo "... Version 1" ; \ |
| } |
| @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ |
| echo "... Version 2" ; \ |
| } |
| @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia |
| |
| xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETPHONE_V2_config \ |
| NETPHONE_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring NETPHONE_config,$@)" ] || \ |
| { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ |
| } |
| @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone |
| |
| xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) |
| |
| NETTA_ISDN_6412_SWAPHOOK_config \ |
| NETTA_ISDN_SWAPHOOK_config \ |
| NETTA_6412_SWAPHOOK_config \ |
| NETTA_SWAPHOOK_config \ |
| NETTA_ISDN_6412_config \ |
| NETTA_ISDN_config \ |
| NETTA_6412_config \ |
| NETTA_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring ISDN_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ |
| } |
| @[ -n "$(findstring ISDN_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring 6412_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ |
| } |
| @[ -n "$(findstring 6412_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ |
| } |
| @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ |
| } |
| @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta |
| |
| xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETTA2_V2_config \ |
| NETTA2_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring NETTA2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ |
| } |
| @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 |
| |
| NC650_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx nc650 |
| |
| NX823_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx nx823 |
| |
| pcu_e_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens |
| |
| QS850_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc |
| |
| QS823_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc |
| |
| QS860T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc |
| |
| quantum_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx quantum |
| |
| R360MPI_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx r360mpi |
| |
| RBC823_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx rbc823 |
| |
| RPXClassic_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic |
| |
| RPXlite_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RPXlite |
| |
| RPXlite_DW_64_config \ |
| RPXlite_DW_LCD_config \ |
| RPXlite_DW_64_LCD_config \ |
| RPXlite_DW_NVRAM_config \ |
| RPXlite_DW_NVRAM_64_config \ |
| RPXlite_DW_NVRAM_LCD_config \ |
| RPXlite_DW_NVRAM_64_LCD_config \ |
| RPXlite_DW_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _64,$@)" ] || \ |
| { echo "#define RPXlite_64MHz" >>include/config.h ; \ |
| echo "... with 64MHz system clock ..."; \ |
| } |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ |
| echo "... with LCD display ..."; \ |
| } |
| @[ -z "$(findstring _NVRAM,$@)" ] || \ |
| { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ |
| echo "... with ENV in NVRAM ..."; \ |
| } |
| @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw |
| |
| rmu_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx rmu |
| |
| RRvision_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RRvision |
| |
| RRvision_LCD_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h |
| @./mkconfig -a RRvision ppc mpc8xx RRvision |
| |
| SM850_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx |
| |
| SPD823TS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx spd8xx |
| |
| stxxtc_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx stxxtc |
| |
| svm_sc8xx_config: unconfig |
| @ >include/config.h |
| @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx |
| |
| SXNI855T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx sixnet |
| |
| # EMK MPC8xx based modules |
| TOP860_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx top860 emk |
| |
| # Play some tricks for configuration selection |
| # Only 855 and 860 boards may come with FEC |
| # and only 823 boards may have LCD support |
| xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) |
| |
| FPS850L_config \ |
| FPS860L_config \ |
| NSCU_config \ |
| TQM823L_config \ |
| TQM823L_LCD_config \ |
| TQM850L_config \ |
| TQM855L_config \ |
| TQM860L_config \ |
| TQM862L_config \ |
| TQM823M_config \ |
| TQM850M_config \ |
| TQM855M_config \ |
| TQM860M_config \ |
| TQM862M_config \ |
| TQM866M_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ |
| echo "... with LCD display" ; \ |
| } |
| @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx |
| |
| TTTech_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h |
| @./mkconfig -a TQM823L ppc mpc8xx tqm8xx |
| |
| uc100_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx uc100 |
| |
| v37_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h |
| @./mkconfig $(@:_config=) ppc mpc8xx v37 |
| |
| wtk_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h |
| @./mkconfig -a TQM823L ppc mpc8xx tqm8xx |
| |
| ######################################################################### |
| ## PPC4xx Systems |
| ######################################################################### |
| xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) |
| |
| ADCIOP_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx adciop esd |
| |
| AP1000_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix |
| |
| APC405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd |
| |
| AR405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd |
| |
| ASH405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd |
| |
| bamboo_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc |
| |
| bubinga_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc |
| |
| CANBT_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx canbt esd |
| |
| CATcenter_config \ |
| CATcenter_25_config \ |
| CATcenter_33_config: unconfig |
| @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h |
| @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h |
| @[ -z "$(findstring _25,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ |
| echo "SysClk = 25MHz" ; \ |
| } |
| @[ -z "$(findstring _33,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ |
| echo "SysClk = 33MHz" ; \ |
| } |
| @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave |
| |
| CPCI2DP_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd |
| |
| CPCI405_config \ |
| CPCI4052_config \ |
| CPCI405DT_config \ |
| CPCI405AB_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd |
| @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk |
| |
| CPCI440_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd |
| |
| CPCIISER4_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd |
| |
| CRAYL1_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx L1 cray |
| |
| csb272_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx csb272 |
| |
| csb472_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx csb472 |
| |
| DASA_SIM_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd |
| |
| DP405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd |
| |
| DU405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx du405 esd |
| |
| ebony_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc |
| |
| ERIC_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx eric |
| |
| EXBITGEN_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx exbitgen |
| |
| G2000_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx g2000 |
| |
| HH405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd |
| |
| HUB405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd |
| |
| JSE_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx jse |
| |
| KAREF_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst |
| |
| luan_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx luan amcc |
| |
| METROBOX_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst |
| |
| MIP405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl |
| |
| MIP405T_config: unconfig |
| @echo "#define CONFIG_MIP405T" >include/config.h |
| @echo "Enable subset config for MIP405T" |
| @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl |
| |
| ML2_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ml2 |
| |
| ml300_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx |
| |
| ocotea_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc |
| |
| OCRTC_config \ |
| ORSG_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd |
| |
| p3p440_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive |
| |
| PCI405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd |
| |
| PIP405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl |
| |
| PLU405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd |
| |
| PMC405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd |
| |
| PPChameleonEVB_config \ |
| PPChameleonEVB_BA_25_config \ |
| PPChameleonEVB_ME_25_config \ |
| PPChameleonEVB_HI_25_config \ |
| PPChameleonEVB_BA_33_config \ |
| PPChameleonEVB_ME_33_config \ |
| PPChameleonEVB_HI_33_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring EVB_BA,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ |
| echo "... BASIC model" ; \ |
| } |
| @[ -z "$(findstring EVB_ME,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ |
| echo "... MEDIUM model" ; \ |
| } |
| @[ -z "$(findstring EVB_HI,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ |
| echo "... HIGH-END model" ; \ |
| } |
| @[ -z "$(findstring _25,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ |
| echo "SysClk = 25MHz" ; \ |
| } |
| @[ -z "$(findstring _33,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ |
| echo "SysClk = 33MHz" ; \ |
| } |
| @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave |
| |
| sbc405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx sbc405 |
| |
| sycamore_config: unconfig |
| @echo "Configuring for sycamore board as subset of walnut..." |
| @./mkconfig -a walnut ppc ppc4xx walnut amcc |
| |
| VOH405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd |
| |
| VOM405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd |
| |
| CMS700_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd |
| |
| W7OLMC_config \ |
| W7OLMG_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx w7o |
| |
| walnut_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc |
| |
| WUH405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd |
| |
| XPEDITE1K_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k |
| |
| yosemite_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc |
| |
| yellowstone_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc |
| |
| ######################################################################### |
| ## MPC8220 Systems |
| ######################################################################### |
| |
| Alaska8220_config \ |
| Yukon8220_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8220 alaska |
| |
| sorcery_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8220 sorcery |
| |
| ######################################################################### |
| ## MPC824x Systems |
| ######################################################################### |
| xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) |
| |
| A3000_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x a3000 |
| |
| barco_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x barco |
| |
| BMW_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x bmw |
| |
| CPC45_config \ |
| CPC45_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| CU824_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x cu824 |
| |
| debris_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x debris etin |
| |
| eXalion_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x eXalion |
| |
| HIDDEN_DRAGON_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon |
| |
| MOUSSE_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x mousse |
| |
| MUSENKI_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x musenki |
| |
| MVBLUE_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x mvblue |
| |
| OXC_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x oxc |
| |
| PN62_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x pn62 |
| |
| Sandpoint8240_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sandpoint |
| |
| Sandpoint8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sandpoint |
| |
| sbc8240_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sbc8240 |
| |
| SL8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sl8245 |
| |
| utx8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x utx8245 |
| |
| ######################################################################### |
| ## MPC8260 Systems |
| ######################################################################### |
| |
| atc_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 atc |
| |
| cogent_mpc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 cogent |
| |
| CPU86_config \ |
| CPU86_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| CPU87_config \ |
| CPU87_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| ep8248_config \ |
| ep8248E_config : unconfig |
| @./mkconfig ep8248 ppc mpc8260 ep8248 |
| |
| ep8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 ep8260 |
| |
| gw8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 gw8260 |
| |
| hymod_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 hymod |
| |
| IDS8247_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 ids8247 |
| |
| IPHASE4539_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 |
| |
| ISPAN_config \ |
| ISPAN_REVB_config: unconfig |
| @if [ "$(findstring _REVB_,$@)" ] ; then \ |
| echo "#define CFG_REV_B" > include/config.h ; \ |
| fi |
| @./mkconfig -a ISPAN ppc mpc8260 ispan |
| |
| MPC8260ADS_config \ |
| MPC8260ADS_lowboot_config \ |
| MPC8260ADS_33MHz_config \ |
| MPC8260ADS_33MHz_lowboot_config \ |
| MPC8260ADS_40MHz_config \ |
| MPC8260ADS_40MHz_lowboot_config \ |
| MPC8272ADS_config \ |
| MPC8272ADS_lowboot_config \ |
| PQ2FADS_config \ |
| PQ2FADS_lowboot_config \ |
| PQ2FADS-VR_config \ |
| PQ2FADS-VR_lowboot_config \ |
| PQ2FADS-ZU_config \ |
| PQ2FADS-ZU_lowboot_config \ |
| PQ2FADS-ZU_66MHz_config \ |
| PQ2FADS-ZU_66MHz_lowboot_config \ |
| : unconfig |
| $(if $(findstring PQ2FADS,$@), \ |
| @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ |
| @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) |
| $(if $(findstring MHz,$@), \ |
| @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ |
| $(if $(findstring VR,$@), \ |
| @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ |
| echo "... with lowboot configuration" ; \ |
| } |
| @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads |
| |
| MPC8266ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads |
| |
| # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash |
| PM825_config \ |
| PM825_ROMBOOT_config \ |
| PM825_BIGFLASH_config \ |
| PM825_ROMBOOT_BIGFLASH_config \ |
| PM826_config \ |
| PM826_ROMBOOT_config \ |
| PM826_BIGFLASH_config \ |
| PM826_ROMBOOT_BIGFLASH_config: unconfig |
| @if [ "$(findstring PM825_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >include/config.h ; \ |
| else \ |
| >include/config.h ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "... booting from 8-bit flash" ; \ |
| echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| echo "... with 32 MB Flash" ; \ |
| echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ |
| fi; \ |
| else \ |
| echo "... booting from 64-bit flash" ; \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| echo "... with 32 MB Flash" ; \ |
| echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ |
| echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ |
| else \ |
| echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ |
| fi; \ |
| fi |
| @./mkconfig -a PM826 ppc mpc8260 pm826 |
| |
| PM828_config \ |
| PM828_PCI_config \ |
| PM828_ROMBOOT_config \ |
| PM828_ROMBOOT_PCI_config: unconfig |
| @if [ -z "$(findstring _PCI_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>include/config.h ; \ |
| echo "... with PCI enabled" ; \ |
| else \ |
| >include/config.h ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "... booting from 8-bit flash" ; \ |
| echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ |
| fi |
| @./mkconfig -a PM828 ppc mpc8260 pm828 |
| |
| ppmc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 |
| |
| Rattler8248_config \ |
| Rattler_config: unconfig |
| $(if $(findstring 8248,$@), \ |
| @echo "#define CONFIG_MPC8248" > include/config.h) |
| @./mkconfig -a Rattler ppc mpc8260 rattler |
| |
| RPXsuper_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper |
| |
| rsdproto_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 rsdproto |
| |
| sacsng_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 sacsng |
| |
| sbc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 |
| |
| SCM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens |
| |
| TQM8255_AA_config \ |
| TQM8260_AA_config \ |
| TQM8260_AB_config \ |
| TQM8260_AC_config \ |
| TQM8260_AD_config \ |
| TQM8260_AE_config \ |
| TQM8260_AF_config \ |
| TQM8260_AG_config \ |
| TQM8260_AH_config \ |
| TQM8260_AI_config \ |
| TQM8265_AA_config: unconfig |
| @case "$@" in \ |
| TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ |
| TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ |
| TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| esac; \ |
| >include/config.h ; \ |
| if [ "$${CTYPE}" != "MPC8260" ] ; then \ |
| echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ |
| fi; \ |
| echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ |
| echo "... with $${CFREQ}MHz system clock" ; \ |
| if [ "$${CACHE}" == "yes" ] ; then \ |
| echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ |
| echo "... with L2 Cache support" ; \ |
| else \ |
| echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ |
| echo "... without L2 Cache support" ; \ |
| fi; \ |
| if [ "$${BMODE}" == "60x" ] ; then \ |
| echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ |
| echo "... with 60x Bus Mode" ; \ |
| else \ |
| echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ |
| echo "... without 60x Bus Mode" ; \ |
| fi |
| @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 |
| |
| VoVPN-GW_66MHz_config \ |
| VoVPN-GW_100MHz_config: unconfig |
| @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h |
| @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk |
| |
| ZPC1900_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 |
| |
| #======================================================================== |
| # M68K |
| #======================================================================== |
| ######################################################################### |
| ## Coldfire |
| ######################################################################### |
| |
| cobra5272_config : unconfig |
| @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 |
| |
| M5272C3_config : unconfig |
| @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 |
| |
| M5282EVB_config : unconfig |
| @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb |
| |
| TASREG_config : unconfig |
| @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd |
| |
| ######################################################################### |
| ## MPC83xx Systems |
| ######################################################################### |
| |
| MPC8349ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads |
| |
| TQM834x_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc83xx tqm834x |
| |
| MPC8349EMDS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds |
| |
| ######################################################################### |
| ## MPC85xx Systems |
| ######################################################################### |
| |
| MPC8540ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads |
| |
| MPC8540EVAL_config \ |
| MPC8540EVAL_33_config \ |
| MPC8540EVAL_66_config \ |
| MPC8540EVAL_33_slave_config \ |
| MPC8540EVAL_66_slave_config: unconfig |
| @echo "" >include/config.h ; \ |
| if [ "$(findstring _33_,$@)" ] ; then \ |
| echo -n "... 33 MHz PCI" ; \ |
| else \ |
| echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ |
| echo -n "... 66 MHz PCI" ; \ |
| fi ; \ |
| if [ "$(findstring _slave_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ |
| echo " slave" ; \ |
| else \ |
| echo " host" ; \ |
| fi |
| @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval |
| |
| MPC8560ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads |
| |
| MPC8541CDS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds |
| |
| MPC8548CDS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds |
| |
| MPC8555CDS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds |
| |
| PM854_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx pm854 |
| |
| PM856_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx pm856 |
| |
| sbc8540_config \ |
| sbc8540_33_config \ |
| sbc8540_66_config: unconfig |
| @if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_66" >>include/config.h ; \ |
| echo "... 66 MHz PCI" ; \ |
| else \ |
| >include/config.h ; \ |
| echo "... 33 MHz PCI" ; \ |
| fi |
| @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 |
| |
| sbc8560_config \ |
| sbc8560_33_config \ |
| sbc8560_66_config: unconfig |
| @if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_66" >>include/config.h ; \ |
| echo "... 66 MHz PCI" ; \ |
| else \ |
| >include/config.h ; \ |
| echo "... 33 MHz PCI" ; \ |
| fi |
| @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 |
| |
| stxgp3_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 |
| |
| TQM8540_config \ |
| TQM8541_config \ |
| TQM8555_config \ |
| TQM8560_config: unconfig |
| @CTYPE=$(subst TQM,,$(@:_config=)); \ |
| >include/config.h ; \ |
| echo "... TQM"$${CTYPE}; \ |
| echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \ |
| echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \ |
| echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \ |
| echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \ |
| echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h |
| @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx |
| |
| ######################################################################### |
| ## 74xx/7xx Systems |
| ######################################################################### |
| |
| AmigaOneG3SE_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI |
| |
| BAB7xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec |
| |
| CPCI750_config: unconfig |
| @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd |
| |
| DB64360_config: unconfig |
| @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell |
| |
| DB64460_config: unconfig |
| @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell |
| |
| ELPPC_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec |
| |
| EVB64260_config \ |
| EVB64260_750CX_config: unconfig |
| @./mkconfig EVB64260 ppc 74xx_7xx evb64260 |
| |
| P3G4_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 |
| |
| PCIPPC2_config \ |
| PCIPPC6_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 |
| |
| ZUMA_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 |
| |
| #======================================================================== |
| # ARM |
| #======================================================================== |
| ######################################################################### |
| ## StrongARM Systems |
| ######################################################################### |
| |
| assabet_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 assabet |
| |
| dnp1110_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 dnp1110 |
| |
| gcplus_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 gcplus |
| |
| lart_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 lart |
| |
| shannon_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 shannon |
| |
| ######################################################################### |
| ## ARM92xT Systems |
| ######################################################################### |
| |
| xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) |
| |
| xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) |
| |
| xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) |
| |
| at91rm9200dk_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 |
| |
| cmc_pu2_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 |
| |
| csb637_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200 |
| |
| mp2usb_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 |
| |
| |
| ######################################################################## |
| ## ARM Integrator boards - see doc/README-integrator for more info. |
| integratorap_config \ |
| ap_config \ |
| ap966_config \ |
| ap922_config \ |
| ap922_XA10_config \ |
| ap7_config \ |
| ap720t_config \ |
| ap920t_config \ |
| ap926ejs_config \ |
| ap946es_config: unconfig |
| @board/integratorap/split_by_variant.sh $@ |
| |
| integratorcp_config \ |
| cp_config \ |
| cp920t_config \ |
| cp926ejs_config \ |
| cp946es_config \ |
| cp1136_config \ |
| cp966_config \ |
| cp922_config \ |
| cp922_XA10_config \ |
| cp1026_config: unconfig |
| @board/integratorcp/split_by_variant.sh $@ |
| |
| kb9202_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 |
| |
| lpd7a400_config \ |
| lpd7a404_config: unconfig |
| @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x |
| |
| mx1ads_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx |
| |
| mx1fs2_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx |
| |
| netstar_32_config \ |
| netstar_config: unconfig |
| @if [ "$(findstring _32_,$@)" ] ; then \ |
| echo "... 32MB SDRAM" ; \ |
| echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \ |
| else \ |
| echo "... 64MB SDRAM" ; \ |
| echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \ |
| fi |
| @./mkconfig -a netstar arm arm925t netstar |
| |
| omap1510inn_config : unconfig |
| @./mkconfig $(@:_config=) arm arm925t omap1510inn |
| |
| omap5912osk_config : unconfig |
| @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap |
| |
| omap1610inn_config \ |
| omap1610inn_cs0boot_config \ |
| omap1610inn_cs3boot_config \ |
| omap1610inn_cs_autoboot_config \ |
| omap1610h2_config \ |
| omap1610h2_cs0boot_config \ |
| omap1610h2_cs3boot_config \ |
| omap1610h2_cs_autoboot_config: unconfig |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ |
| echo "... configured for CS0 boot"; \ |
| elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ |
| echo "... configured for CS_AUTO boot"; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ |
| echo "... configured for CS3 boot"; \ |
| fi; |
| @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap |
| |
| omap730p2_config \ |
| omap730p2_cs0boot_config \ |
| omap730p2_cs3boot_config : unconfig |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ |
| echo "... configured for CS0 boot"; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ |
| echo "... configured for CS3 boot"; \ |
| fi; |
| @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap |
| |
| scb9328_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx |
| |
| smdk2400_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 |
| |
| smdk2410_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 |
| |
| SX1_config : unconfig |
| @./mkconfig $(@:_config=) arm arm925t sx1 |
| |
| # TRAB default configuration: 8 MB Flash, 32 MB RAM |
| trab_config \ |
| trab_bigram_config \ |
| trab_bigflash_config \ |
| trab_old_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _bigram,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ |
| echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ |
| echo "... with 8 MB Flash, 32 MB RAM" ; \ |
| } |
| @[ -z "$(findstring _bigflash,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ |
| echo "... with 16 MB Flash, 16 MB RAM" ; \ |
| echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ |
| } |
| @[ -z "$(findstring _old,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ |
| echo "... with 8 MB Flash, 16 MB RAM" ; \ |
| echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ |
| } |
| @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 |
| |
| VCMA9_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 |
| |
| #======================================================================== |
| # ARM supplied Versatile development boards |
| #======================================================================== |
| versatile_config \ |
| versatileab_config \ |
| versatilepb_config : unconfig |
| @board/versatile/split_by_variant.sh $@ |
| |
| voiceblue_smallflash_config \ |
| voiceblue_config: unconfig |
| @if [ "$(findstring _smallflash_,$@)" ] ; then \ |
| echo "... boot from lower flash bank" ; \ |
| echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ |
| echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ |
| else \ |
| echo "... boot from upper flash bank" ; \ |
| >include/config.h ; \ |
| echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ |
| fi |
| @./mkconfig -a voiceblue arm arm925t voiceblue |
| |
| cm4008_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 |
| |
| cm41xx_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 |
| |
| ######################################################################### |
| ## S3C44B0 Systems |
| ######################################################################### |
| |
| B2_config : unconfig |
| @./mkconfig $(@:_config=) arm s3c44b0 B2 dave |
| |
| ######################################################################### |
| ## ARM720T Systems |
| ######################################################################### |
| |
| armadillo_config: unconfig |
| @./mkconfig $(@:_config=) arm arm720t armadillo |
| |
| ep7312_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t ep7312 |
| |
| impa7_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t impa7 |
| |
| modnet50_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t modnet50 |
| |
| evb4510_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t evb4510 |
| |
| ######################################################################### |
| ## XScale Systems |
| ######################################################################### |
| |
| adsvix_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa adsvix |
| |
| cerf250_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa cerf250 |
| |
| cradle_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa cradle |
| |
| csb226_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa csb226 |
| |
| delta_config : |
| @./mkconfig $(@:_config=) arm pxa delta |
| |
| innokom_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa innokom |
| |
| ixdp425_config : unconfig |
| @./mkconfig $(@:_config=) arm ixp ixdp425 |
| |
| lubbock_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa lubbock |
| |
| logodl_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa logodl |
| |
| pxa255_idp_config: unconfig |
| @./mkconfig $(@:_config=) arm pxa pxa255_idp |
| |
| wepep250_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa wepep250 |
| |
| xaeniax_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa xaeniax |
| |
| xm250_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa xm250 |
| |
| xsengine_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa xsengine |
| |
| zylonite_config : |
| @./mkconfig $(@:_config=) arm pxa zylonite |
| |
| ######################################################################### |
| ## ARM1136 Systems |
| ######################################################################### |
| omap2420h4_config : unconfig |
| @./mkconfig $(@:_config=) arm arm1136 omap2420h4 |
| |
| #======================================================================== |
| # i386 |
| #======================================================================== |
| ######################################################################### |
| ## AMD SC520 CDP |
| ######################################################################### |
| sc520_cdp_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_cdp |
| |
| sc520_spunk_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_spunk |
| |
| sc520_spunk_rel_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_spunk |
| |
| #======================================================================== |
| # MIPS |
| #======================================================================== |
| ######################################################################### |
| ## MIPS32 4Kc |
| ######################################################################### |
| |
| xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) |
| |
| incaip_100MHz_config \ |
| incaip_133MHz_config \ |
| incaip_150MHz_config \ |
| incaip_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ |
| echo "... with 100MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _133MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ |
| echo "... with 133MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _150MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ |
| echo "... with 150MHz system clock" ; \ |
| } |
| @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip |
| |
| tb0229_config: unconfig |
| @./mkconfig $(@:_config=) mips mips tb0229 |
| |
| ######################################################################### |
| ## MIPS32 AU1X00 |
| ######################################################################### |
| dbau1000_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_DBAU1000 1" >>include/config.h |
| @./mkconfig -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1100_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_DBAU1100 1" >>include/config.h |
| @./mkconfig -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1500_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_DBAU1500 1" >>include/config.h |
| @./mkconfig -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_DBAU1550 1" >>include/config.h |
| @./mkconfig -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_el_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_DBAU1550 1" >>include/config.h |
| @./mkconfig -a dbau1x00 mips mips dbau1x00 |
| |
| pb1000_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_PB1000 1" >>include/config.h |
| @./mkconfig -a pb1x00 mips mips pb1x00 |
| |
| ######################################################################### |
| ## MIPS64 5Kc |
| ######################################################################### |
| |
| purple_config : unconfig |
| @./mkconfig $(@:_config=) mips mips purple |
| |
| ######################################################################### |
| ## MIPS32 AR7100 (24K) |
| ######################################################################### |
| tb225_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a tb225 mips mips tb225 ar7100 ar7100 |
| |
| pb42_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a pb42 mips mips pb42 ar7100 ar7100 |
| |
| tb243_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @echo "#define CONFIG_AR9100 1" >>include/config.h |
| @./mkconfig -a tb243 mips mips tb243 ar7100 ar7100 |
| |
| ap83_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @echo "#define CONFIG_AR9100 1" >>include/config.h |
| @./mkconfig -a ap83 mips mips ap83 ar7100 ar7100 |
| |
| ap81_config : unconfig |
| @ >include/config.h |
| @echo '#ifndef _INCLUDE_CONFIG_H' >>include/config.h |
| @echo '#define _INCLUDE_CONFIG_H' >>include/config.h |
| @echo '#define CONFIG_AR7100 1' >>include/config.h |
| @echo '#define CONFIG_AR9100 1' >>include/config.h |
| |
| ifeq ($(CONFIG_AP81_CARRIER_CUS109), 1) |
| @echo '#define CONFIG_AP81_CUS109 1' >>include/config.h |
| endif |
| ifeq ($(BUILD_CONFIG), _4m) |
| ifeq ($(CONFIG_CARRIER_4MB), 1) |
| @echo '#define BUILD_CONFIG_OVERRIDE 1' >>include/config.h |
| @echo '#define CFG_FLASH_SIZE 0x00400000' >>include/config.h |
| @echo '#define CONFIG_BOOTARGS "console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:256k(u-boot),128k(u-boot-env),2112k(rootfs),384k(config),1024k(uImage),64k(nvram),64k(lang),64k(ART)"' >>include/config.h |
| @echo '#define MTDPARTS_DEFAULT "mtdparts=ar7100-nor0:256k(u-boot),128k(u-boot-env),2112k(rootfs),384k(config),1024k(uImage),64k(nvram),64k(lang),64k(ART)"' >>include/config.h |
| @echo '#define CONFIG_BOOTCOMMAND "bootm 0xbf300000"' >>include/config.h |
| else |
| @echo '#define BUILD_CONFIG_OVERRIDE 1' >>include/config.h |
| @echo '#define CFG_FLASH_SIZE 0x00400000' >>include/config.h |
| @echo '#define CONFIG_BOOTARGS "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ar7100-nor0:256k(u-boot),64k(u-boot-env),2688k(rootfs),1024k(uImage),64k(ART)"' >>include/config.h |
| @echo '#define MTDPARTS_DEFAULT "mtdparts=ar7100-nor0:256k(u-boot),64k(u-boot-env),2688k(rootfs),1024k(uImage),64k(ART)"' >>include/config.h |
| @echo '#define CONFIG_BOOTCOMMAND "bootm 0xbf300000"' >>include/config.h |
| endif |
| endif |
| @echo '#endif /* _INCLUDE_CONFIG_H */' >>include/config.h |
| @./mkconfig -a ap81 mips mips ap81 ar7100 ar7100 |
| |
| ap94_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a ap94 mips mips ap94 ar7100 ar7100 |
| |
| ap94min_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a ap94min mips mips ap94 ar7100 ar7100 |
| |
| pb44_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a pb44 mips mips pb44 ar7100 ar7100 |
| |
| pb45_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a pb45 mips mips pb45 ar7100 ar7100 |
| |
| pb47_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a pb47 mips mips pb47 ar7100 ar7100 |
| |
| ap96_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @./mkconfig -a ap96 mips mips ap96 ar7100 ar7100 |
| |
| cus97_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7100 1" >>include/config.h |
| @echo "#define CONFIG_AR9100 1" >>include/config.h |
| @./mkconfig -a cus97 mips mips cus97 ar7100 ar7100 |
| ar7240_emu_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ar7240_emu mips mips ar7240_emu ar7240 ar7240 |
| |
| wasp_emu_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| @./mkconfig -a wasp_emu mips mips wasp_emu ar7240 ar7240 |
| |
| db12x_config : unconfig |
| @ >include/config.h |
| |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG2), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f2e) |
| @echo '#define CONFIG_F2E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifeq ($(BOOT_FROM_NAND),1) |
| @echo '#define CONFIG_ATH_NAND_BR 1' >>include/config.h |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| @echo "#define ATH_CAL_NAND_PARTITION "\"$(strip ${ATH_CAL_NAND_PARTITION})\" >>include/config.h |
| @echo '#define ATH_CAL_OFF_INVAL 0xbad0ff' >>include/config.h |
| endif |
| ifeq ($(ATH_DUAL_FLASH),1) |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| ifeq ($(DB12X_P2P_ENV), 1) |
| @echo "#define CONFIG_DB12X_P2P 1" >>include/config.h |
| endif |
| @./mkconfig -a db12x mips mips db12x ar7240 ar7240 |
| |
| board953x_config: unconfig |
| @ >include/config.h |
| @echo '#define CONFIG_ATHEROS 1' >include/config.h |
| @echo '#define CONFIG_MACH_QCA953x 1' >>include/config.h |
| @echo '#define CFG_INIT_STACK_IN_SRAM 1' >>include/config.h |
| @echo '#define CONFIG_'`echo $(CFG_BOARD_TYPE) | tr [a-z] [A-Z] | sed s/-/_/g`' 1' >>include/config.h |
| @echo '#define __CONFIG_BOARD_NAME $(CFG_BOARD_TYPE)' >>include/config.h |
| @echo '#define CONFIG_BOARD_NAME "$(CFG_BOARD_TYPE)"' >>include/config.h |
| @echo "#define BUILD_VERSION "\"$(BUILDVERSION)\" >>include/config.h |
| |
| gfmn100_config: unconfig |
| @ >include/config.h |
| @echo '#define CONFIG_ATHEROS 1' >include/config.h |
| @echo '#define CONFIG_MACH_QCA953x 1' >>include/config.h |
| @echo '#define CFG_INIT_STACK_IN_SRAM 1' >>include/config.h |
| @echo '#define CONFIG_'`echo AP143 | tr [a-z] [A-Z] | sed s/-/_/g`' 1' >>include/config.h |
| @echo '#define __CONFIG_BOARD_NAME ap143' >>include/config.h |
| @echo '#define CONFIG_BOARD_NAME "ap143"' >>include/config.h |
| @echo "#define BUILD_VERSION "\"$(BUILDVERSION)\" >>include/config.h |
| @echo '#define FLASH_SIZE 32' >>include/config.h |
| @echo '#define ENABLE_EXT_ADDR_SUPPORT $(EXT_ADDR_SUPPORT)' >>include/config.h |
| |
| ifdef pll |
| @echo '#define CFG_PLL_FREQ $(pll)' >>include/config.h |
| else |
| @echo '#define CFG_PLL_FREQ CFG_PLL_650_400_200' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_ATH_GMAC_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_ATH_GMAC_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_ATH_GMAC_NMACS 2' >>include/config.h |
| endif |
| |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a board953x mips mips board953x atheros |
| |
| ap120_config : unconfig |
| @ >include/config.h |
| |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG2), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f2e) |
| @echo '#define CONFIG_F2E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifeq ($(BOOT_FROM_NAND),1) |
| @echo '#define CONFIG_ATH_NAND_BR 1' >>include/config.h |
| endif |
| ifeq ($(or $(BOOT_FROM_NAND),$(ATH_DUAL_FLASH)),1) |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| @./mkconfig -a ap120 mips mips ap120 ar7240 ar7240 |
| |
| db12x-lte_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG2), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f2e) |
| @echo '#define CONFIG_F2E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| # |
| # U-Boot from spi flash. Kernel & FS in NAND |
| # |
| ifdef ATH_DUAL_FLASH |
| @echo "#define ATH_DUAL_FLASH 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a db12x mips mips db12x ar7240 ar7240 |
| |
| db12x-hgw_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG2), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f2e) |
| @echo '#define CONFIG_F2E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| ifneq ($(findstring db12x-hgw,$(BOARD_TYPE)),) |
| @echo '#define CONFIG_DB12X-HGW 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifeq ($(BOOT_FROM_NAND),1) |
| @echo '#define CONFIG_ATH_NAND_BR 1' >>include/config.h |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| @echo "#define ATH_CAL_NAND_PARTITION "\"$(strip ${ATH_CAL_NAND_PARTITION})\" >>include/config.h |
| @echo '#define ATH_CAL_OFF_INVAL 0xbad0ff' >>include/config.h |
| endif |
| ifeq ($(ATH_DUAL_FLASH),1) |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| # |
| # U-Boot from spi flash. Kernel & FS in NAND |
| # |
| ifdef ATH_DUAL_FLASH |
| @echo "#define ATH_DUAL_FLASH 1" >>include/config.h |
| endif |
| |
| @./mkconfig -a db12x-hybrid mips mips db12x-hybrid ar7240 ar7240 |
| |
| zte-mf28l_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG2), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17_hwaccel) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f2e) |
| @echo '#define CONFIG_F2E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifeq ($(BOOT_FROM_NAND),1) |
| @echo '#define CONFIG_ATH_NAND_BR 1' >>include/config.h |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| ifeq ($(ATH_DUAL_FLASH),1) |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| |
| @./mkconfig -a db12x mips mips db12x ar7240 ar7240 |
| |
| |
| wah132_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a wah132 mips mips wah132 ar7240 ar7240 |
| |
| reh132_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a reh132 mips mips reh132 ar7240 ar7240 |
| |
| db12x-hybrid_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a db12x-hybrid mips mips db12x-hybrid ar7240 ar7240 |
| |
| aph126_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a aph126 mips mips aph126 ar7240 ar7240 |
| |
| aph128_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a aph128 mips mips aph128 ar7240 ar7240 |
| |
| dhp1565_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a dhp1565 mips mips dhp1565 ar7240 ar7240 |
| |
| |
| db12x-extender_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| ifneq ($(findstring ap123,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| endif |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef BOOT_FROM_NAND |
| @echo "#define CONFIG_ATH_NAND_FL 1" >>include/config.h |
| ifeq ($(BUILD_TYPE),jffs2) |
| @echo "#define CONFIG_ATH_NAND_JFFS2 1" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 0" >>include/config.h |
| else |
| @echo "#define CONFIG_ATH_NAND_JFFS2 0" >>include/config.h |
| @echo "#define CONFIG_ATH_NAND_YAFFS 1" >>include/config.h |
| endif |
| endif |
| @./mkconfig -a db12x-extender mips mips db12x-extender ar7240 ar7240 |
| |
| ap123_config : unconfig |
| @ >include/config.h |
| ifeq ($(ETH_CONFIG2), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_DUAL_PHY_SUPPORT 1' >>include/config.h |
| else |
| ifeq ($(ETH_CONFIG), _s17) |
| @echo '#define CONFIG_ATHRS17_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| endif |
| ifeq ($(ETH_CONFIG), _s16) |
| @echo '#define CONFIG_AR7242_S16_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _f1e) |
| @echo '#define CONFIG_F1E_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _vir) |
| @echo '#define CONFIG_VIR_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 1' >>include/config.h |
| endif |
| ifeq ($(ETH_CONFIG), _s27) |
| @echo '#define CFG_ATHRS27_PHY 1' >>include/config.h |
| @echo '#define CFG_AG7240_NMACS 2' >>include/config.h |
| endif |
| |
| ifneq ($(findstring mi124,$(BUILD_CONFIG)),) |
| @echo '#define CONFIG_MI124 1' >>include/config.h |
| endif |
| |
| @echo '#define CONFIG_AP123 1' >>include/config.h |
| @echo '#define CONFIG_ROOTFS_TYPE "rootfstype=squashfs"' >>include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_WASP 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| ifeq ($(DB12X_P2P_ENV), 1) |
| @echo "#define CONFIG_DB12X_P2P 1" >>include/config.h |
| endif |
| |
| ifeq ($(BOOT_FROM_NAND),1) |
| @echo '#define CONFIG_ATH_NAND_BR 1' >>include/config.h |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| ifeq ($(ATH_DUAL_FLASH),1) |
| @echo '#define CONFIG_ATH_NAND_SUPPORT 1' >>include/config.h |
| endif |
| |
| @./mkconfig -a ap123 mips mips ap123 ar7240 ar7240 |
| |
| |
| ap91_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap91 mips mips ap91 ar7240 ar7240 |
| ap91-2MB_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap91-2MB mips mips ap91-2MB ar7240 ar7240 |
| ap91-2x8_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap91-2x8 mips mips ap91-2x8 ar7240 ar7240 |
| ap93_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap93 mips mips ap93 ar7240 ar7240 |
| ap91-router_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap91-router mips mips ap91-router ar7240 ar7240 |
| ap93-hgw_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap93-hgw mips mips ap93-hgw ar7240 ar7240 |
| cus136_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a cus136 mips mips cus136 ar7240 ar7240 |
| wrt54g_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a wrt54g mips mips wrt54g ar7240 ar7240 |
| pb90_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a pb90 mips mips pb90 ar7240 ar7240 |
| tb327_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a tb327 mips mips tb327 ar7240 ar7240 |
| pb93_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a pb93 mips mips pb93 ar7240 ar7240 |
| pb9x_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a pb9x mips mips pb9x ar7240 ar7240 |
| |
| pb9x-2x8_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a pb9x-2x8 mips mips pb9x-2x8 ar7240 ar7240 |
| ap98_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap98 mips mips ap98 ar7240 ar7240 |
| |
| pb9x-2.6.31_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a pb9x-2.6.31 mips mips pb9x-2.6.31 ar7240 ar7240 |
| |
| pb9x-offload_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| ifdef ROOTFS |
| @echo "#define ROOTFS $(ROOTFS)" >>include/config.h |
| endif |
| @./mkconfig -a pb9x-2.6.31 mips mips pb9x-2.6.31 ar7240 ar7240 |
| |
| pb92_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a pb92 mips mips pb92 ar7240 ar7240 |
| |
| ap99_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap99 mips mips ap99 ar7240 ar7240 |
| |
| ap99-small_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap99-small mips mips ap99-small ar7240 ar7240 |
| |
| |
| ap99-2.6.31_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap99-2.6.31 mips mips ap99-2.6.31 ar7240 ar7240 |
| |
| ap99-hgw_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap99-hgw mips mips ap99-hgw ar7240 ar7240 |
| ap99-ivi_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| ifdef FLASH_SIZE |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| endif |
| @./mkconfig -a ap99-ivi mips mips ap99-ivi ar7240 ar7240 |
| |
| ap101_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap101 mips mips ap101 ar7240 ar7240 |
| |
| ap101-small_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap101-small mips mips ap101-small ar7240 ar7240 |
| |
| ap101-2.6.31_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap101-2.6.31 mips mips ap101-2.6.31 ar7240 ar7240 |
| |
| mi93_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a mi93 mips mips mi93 ar7240 ar7240 |
| |
| ap111_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap111 mips mips ap111 ar7240 ar7240 |
| |
| ap111-2.6.31_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @./mkconfig -a ap111-2.6.31 mips mips ap111-2.6.31 ar7240 ar7240 |
| |
| hornet_common_config : |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_MACH_HORNET 1" >>include/config.h |
| ifdef BUILD_EMU |
| @echo "#define CONFIG_HORNET_EMU 1" >>include/config.h |
| ifeq ($(BUILD_EMU), 24) |
| @echo "#define CONFIG_HORNET_EMU_HARDI 1" >>include/config.h |
| @echo "#define CONFIG_HORNET_EMU_HARDI_WLAN 1" >>include/config.h |
| else |
| |
| ifeq ($(BUILD_EMU), 40) |
| # |
| # No need to include CONFIG_HORNET_EMU_HARDI_WLAN in 40Mhz, only for emulation and 24Mhz board |
| # |
| else |
| # |
| # Configure it as 24Mhz by default |
| # |
| @export BUILD_EMU=24 |
| @echo "#define CONFIG_HORNET_EMU_HARDI_WLAN 1" >>include/config.h |
| endif |
| endif |
| endif |
| ifeq ($(CONFIG_HORNET_XTAL), 40) |
| @echo "#define CONFIG_40MHZ_XTAL_SUPPORT 1" >>include/config.h |
| endif |
| ifeq ($(CONFIG_HORNET_1_1_WAR), 1) |
| @echo "#define CONFIG_HORNET_1_1_WAR 1" >>include/config.h |
| endif |
| ifeq ($(AG7240_BROADCAST_ENABLE), 1) |
| @echo "#define AG7240_BROADCAST_ENABLE 1" >>include/config.h |
| endif |
| ifeq ($(NEW_DDR_TAP_CAL), 1) |
| @echo "#define NEW_DDR_TAP_CAL 1" >>include/config.h |
| endif |
| |
| ap121_config : unconfig hornet_common_config |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| ifdef BOARD_STRING |
| @echo "#define BOARD_STRING 1" >>include/config.h |
| endif |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| ap121-2x16_config : unconfig hornet_common_config |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| |
| ap121-2.6.31_config : unconfig hornet_common_config |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| |
| ap121-2.6.31-2MB_config : unconfig hornet_common_config |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| ifeq ($(VXWORKS_UBOOT), 1) |
| @echo "#define VXWORKS_UBOOT 1" >>include/config.h |
| endif |
| |
| ap121-2MB_config : unconfig hornet_common_config |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| |
| ap121-hgw_config : unconfig hornet_common_config |
| @echo "#define FLASH_SIZE $(FLASH_SIZE)" >>include/config.h |
| @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240 |
| |
| hornet_emu_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_AR7240 1" >>include/config.h |
| @echo "#define CONFIG_MACH_HORNET 1" >>include/config.h |
| ifdef BUILD_EMU |
| @echo "#define CONFIG_HORNET_EMU 1" >>include/config.h |
| ifeq ($(BUILD_EMU), 24) |
| @echo "#define CONFIG_HORNET_EMU_HARDI 1" >>include/config.h |