blob: 39e2110ce3d71c40b848d3956fa851a52588a4f2 [file] [log] [blame]
/*
* Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* This file contains the configuration parameters for the db120 board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/ar7240.h>
#if !defined(CONFIG_ATH_NAND_FL)
#define FLASH_SIZE 16
#endif
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#if (FLASH_SIZE == 16)
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#elif (FLASH_SIZE == 8)
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#else
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
#endif
#define CFG_FLASH_SECTOR_SIZE (64*1024)
#if (FLASH_SIZE == 16)
#define CFG_FLASH_SIZE 0x01000000 /* Total flash size */
#elif (FLASH_SIZE == 8)
#define CFG_FLASH_SIZE 0x00800000 /* max number of sectors on one chip */
#else
#define CFG_FLASH_SIZE 0x00400000 /* Total flash size */
#endif
#ifndef COMPRESSED_UBOOT
#define ENABLE_DYNAMIC_CONF 1
#endif
#define CONFIG_WASP_SUPPORT 1
#undef CFG_ATHRS26_PHY
#if (CFG_MAX_FLASH_SECT * CFG_FLASH_SECTOR_SIZE) != CFG_FLASH_SIZE
# error "Invalid flash configuration"
#endif
#define CFG_FLASH_WORD_SIZE unsigned short
// Set this to zero, for 16bit ddr2
#define DDR2_32BIT_SUPPORT 1
/* S16 specific defines */
#define CONFIG_AG7240_GE0_IS_CONNECTED 1
/* Assuming nand flash wouldn't use compressed u-boot */
#ifdef CONFIG_ATH_NAND_FL
# define CFG_FLASH_BASE 0
#else
/*
* We boot from this flash
*/
# define CFG_FLASH_BASE 0x9f000000
#endif
#ifdef COMPRESSED_UBOOT
#define BOOTSTRAP_TEXT_BASE CFG_FLASH_BASE
#define BOOTSTRAP_CFG_MONITOR_BASE BOOTSTRAP_TEXT_BASE
#endif
/*
* Defines to change flash size on reboot
*/
#ifdef ENABLE_DYNAMIC_CONF
#define UBOOT_FLASH_SIZE (256 * 1024)
#define UBOOT_ENV_SEC_START (CFG_FLASH_BASE + UBOOT_FLASH_SIZE)
#define CFG_FLASH_MAGIC 0xaabacada
#define CFG_FLASH_MAGIC_F (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x20)
#define CFG_FLASH_SECTOR_SIZE_F *(volatile int *)(CFG_FLASH_MAGIC_F + 0x4)
#define CFG_FLASH_SIZE_F *(volatile int *)(CFG_FLASH_MAGIC_F + 0x8) /* Total flash size */
#define CFG_MAX_FLASH_SECT_F (CFG_FLASH_SIZE / CFG_FLASH_SECTOR_SIZE) /* max number of sectors on one chip */
#else
#define CFG_FLASH_SIZE_F CFG_FLASH_SIZE
#define CFG_FLASH_SECTOR_SIZE_F CFG_FLASH_SECTOR_SIZE
#endif
/*
* The following #defines are needed to get flash environment right
*/
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (192 << 10)
/* Address and size of Primary Environment Sector */
#define CFG_ENV_ADDR (CFG_FLASH_BASE+UBOOT_FLASH_SIZE)
#define CFG_ENV_SIZE CFG_FLASH_SECTOR_SIZE
#undef CONFIG_BOOTARGS
#if (FLASH_SIZE == 16)
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),8192k(reserve),64k(mib0),64k(ART)"
/* default mtd partition table */
#define MTDPARTS_DEFAULT "mtdparts=ath-nor0:256k(u-boot),256k(u-boot-env),5120k(rootfs),1024k(uImage)"
#else /* FLASH_SIZE=8M */
#ifdef COMPRESSED_UBOOT
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=31:01 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:64k(u-boot),6592k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
/* default mtd partition table */
#define MTDPARTS_DEFAULT "mtdparts=ath-nor0:64k(u-boot),6592k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
#else
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
/* default mtd partition table */
#define MTDPARTS_DEFAULT "mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
#endif
#endif
#if (FLASH_SIZE == 16)
#define CFG_KERNEL_ADDR 0x9f680000
#else
#define CFG_KERNEL_ADDR 0x9f680000
#endif
#define CFG_MIB0_ADDR 0x9ffe0000
#define CONFIG_BOOTCOMMAND "bootm ${KERNELADDR}"
#ifndef CFG_LOAD_ADDR
#define CFG_LOAD_ADDR 0x80060000
#endif
#ifndef COMPRESSED_UBOOT
#define CFG_FS_ADDR 0x9f050000//(CFG_ENV_ADDR+CFG_ENV_SIZE)
#else
#define CFG_FS_ADDR 0x9f010000//(CFG_FLASH_BASE+UBOOT_FLASH_SIZE)
#endif /* COMPRESSED_UBOOT */
#define ENV_FS_ADDR "FSADDR=" MK_STR(CFG_FS_ADDR) "\0"
#define ENV_UBOOT_ADDR "UBOOTADDR=" MK_STR(CFG_FLASH_BASE) "\0"
#define ENV_KERNEL_ADDR "KERNELADDR=" MK_STR(CFG_KERNEL_ADDR) "\0"
#define ENV_MIB0_ADDR "MIB0ADDR=" MK_STR(CFG_MIB0_ADDR) "\0"
#define ENV_UPDATE \
"update=tftpboot " MK_STR(CFG_LOAD_ADDR) " ${filename} && " \
"erase ${loadaddr} +${filesize} && " \
"cp.b ${fileaddr} ${loadaddr} ${filesize}\0"
#define ENV_UPDATE_KERNEL \
"updk=loadaddr=${KERNELADDR} && filename=zImage.uImage && " \
"run update\0"
#define ENV_UPDATE_FS \
"updfs=loadaddr=${FSADDR} && filename=rootfs-jffs2 && " \
"run update\0"
#ifdef COMPRESSED_UBOOT
#define UBOOT_FILENAME "tuboot.bin"
#else
#define UBOOT_FILENAME "u-boot.bin"
#endif
#define ENV_UPDATE_UBOOT \
"updub=loadaddr=${UBOOTADDR} && filename=" UBOOT_FILENAME " && " \
"run update\0"
#define ENV_UPDATE_ALL \
"updall=run updub && run updfs && run updk\0"
#define ENV_ERASE_MIB0 \
"erasemib0=erase ${MIB0ADDR} +0x10000"
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_UBOOT_ADDR \
ENV_FS_ADDR \
ENV_KERNEL_ADDR \
ENV_MIB0_ADDR \
ENV_UPDATE \
ENV_UPDATE_KERNEL \
ENV_UPDATE_FS \
ENV_UPDATE_UBOOT \
ENV_UPDATE_ALL \
ENV_ERASE_MIB0 \
""
#undef CFG_PLL_FREQ
//#define CFG_PLL_FREQ CFG_PLL_600_266_133
//#define CFG_PLL_FREQ CFG_PLL_600_525_262
//#define CFG_PLL_FREQ CFG_PLL_566_550_275
//#define CFG_PLL_FREQ CFG_PLL_566_525_262
//#define CFG_PLL_FREQ CFG_PLL_600_332_166
//#define CFG_PLL_FREQ CFG_PLL_566_475_237
//#define CFG_PLL_FREQ CFG_PLL_600_575_287
//#define CFG_PLL_FREQ CFG_PLL_400_400_200
//#define CFG_PLL_FREQ CFG_PLL_533_400_200
//#define CFG_PLL_FREQ CFG_PLL_600_450_200
//#define CFG_PLL_FREQ CFG_PLL_600_500_1G_250
//#define CFG_PLL_FREQ CFG_PLL_600_550_1_1G_275
//#define CFG_PLL_FREQ CFG_PLL_600_350_175
//#define CFG_PLL_FREQ CFG_PLL_600_300_150
//#define CFG_PLL_FREQ CFG_PLL_600_1_2G_400_200
//#define CFG_PLL_FREQ CFG_PLL_300_300_150
//#define CFG_PLL_FREQ CFG_PLL_500_400_200
//#define CFG_PLL_FREQ CFG_PLL_400_200_200
#if !defined(CONFIG_AP123) && !defined(CONFIG_MI124)
#define CFG_PLL_FREQ CFG_PLL_560_480_240
#else
#define CFG_PLL_FREQ CFG_PLL_533_400_200
#endif
#undef CFG_HZ
/*
* MIPS32 24K Processor Core Family Software User's Manual
*
* 6.2.9 Count Register (CP0 Register 9, Select 0)
* The Count register acts as a timer, incrementing at a constant
* rate, whether or not an instruction is executed, retired, or
* any forward progress is made through the pipeline. The counter
* increments every other clock, if the DC bit in the Cause register
* is 0.
*/
/* Since the count is incremented every other tick, divide by 2 */
/* XXX derive this from CFG_PLL_FREQ */
#if (CFG_PLL_FREQ == CFG_PLL_200_200_100)
# define CFG_HZ (200000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_300_300_150)
# define CFG_HZ (300000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_350_350_175)
# define CFG_HZ (350000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_333_333_166)
# define CFG_HZ (333000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_266_266_133)
# define CFG_HZ (266000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_266_266_66)
# define CFG_HZ (266000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_400_400_200) || (CFG_PLL_FREQ == CFG_PLL_400_400_100)
# define CFG_HZ (400000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_320_320_80) || (CFG_PLL_FREQ == CFG_PLL_320_320_160)
# define CFG_HZ (320000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_410_400_200)
# define CFG_HZ (410000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_420_400_200)
# define CFG_HZ (420000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_240_240_120)
# define CFG_HZ (240000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_160_160_80)
# define CFG_HZ (160000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_400_200_200)
# define CFG_HZ (400000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_500_400_200)
# define CFG_HZ (500000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_400_200) || (CFG_PLL_FREQ == CFG_PLL_600_450_200) || \
(CFG_PLL_FREQ == CFG_PLL_600_600_300) || (CFG_PLL_FREQ == CFG_PLL_600_550_275) || \
(CFG_PLL_FREQ == CFG_PLL_600_332_166) || (CFG_PLL_FREQ == CFG_PLL_600_575_287) || \
(CFG_PLL_FREQ == CFG_PLL_600_525_262) || (CFG_PLL_FREQ == CFG_PLL_600_332_200) || \
(CFG_PLL_FREQ == CFG_PLL_600_266_133) || (CFG_PLL_FREQ == CFG_PLL_600_266_200) || \
(CFG_PLL_FREQ == CFG_PLL_600_650_325) || (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_500_1G_250)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_550_1_1G_275)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_500_250)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_350_175)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_300_150)
# define CFG_HZ (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_533_400_200) || (CFG_PLL_FREQ == CFG_PLL_533_500_250)
# define CFG_HZ (533000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_700_400_200)
# define CFG_HZ (700000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_650_600_300)
# define CFG_HZ (650000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_560_480_240)
# define CFG_HZ (560000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_566_475_237) || (CFG_PLL_FREQ == CFG_PLL_566_450_225) || \
(CFG_PLL_FREQ == CFG_PLL_566_550_275) || (CFG_PLL_FREQ == CFG_PLL_566_525_262) || \
(CFG_PLL_FREQ == CFG_PLL_566_400_200) || (CFG_PLL_FREQ == CFG_PLL_566_500_250)
# define CFG_HZ (566000000/2)
#endif
/*
* timeout values are in ticks
*/
#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
/*
* Cache lock for stack
*/
#define CFG_INIT_SP_OFFSET 0x1000
#ifndef COMPRESSED_UBOOT
#define CFG_ENV_IS_IN_FLASH 1
#undef CFG_ENV_IS_NOWHERE
#else
#undef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_IS_NOWHERE 1
#endif
#if 0
#ifdef CONFIG_ATH_NAND_FL
#define CONFIG_BOOTCOMMAND "bootm 0x80000"
#define CFG_ENV_ADDR 0x00040000
#else /* CONFIG_ATH_NAND_FL */
#define CFG_ENV_ADDR 0x9f040000
#if (FLASH_SIZE == 16)
#define CONFIG_BOOTCOMMAND "bootm 0x9f550000"
#else /* FLASH_SIZE == 16 */
#ifdef COMPRESSED_UBOOT
#if (FLASH_SIZE == 4)
#define CONFIG_BOOTCOMMAND "bootm 0x9f300000"
#else /* FLASH_SIZE == 4 */
#define CONFIG_BOOTCOMMAND "bootm 0x9f320000"
#endif /* FLASH_SIZE == 4 */
#else /* COMPRESSED_UBOOT */
#if defined(CONFIG_MI124) || defined(CONFIG_AP123)
#define CONFIG_BOOTCOMMAND "bootm 0x9f300000"
#else
#define CONFIG_BOOTCOMMAND "bootm 0x9f680000"
#endif
#endif /* COMPRESSED_UBOOT */
#endif /* FLASH_SIZE == 16 */
#endif /* CONFIG_ATH_NAND_FL */
#endif
//#define CONFIG_FLASH_16BIT
/* DDR init values */
#define CONFIG_NR_DRAM_BANKS 2
/* DDR settings for WASP */
#define CFG_DDR_REFRESH_VAL 0x4270
#define CFG_DDR_CONFIG_VAL 0xc7bc8cd0
#define CFG_DDR_MODE_VAL_INIT 0x133
#define CFG_DDR_EXT_MODE_VAL 0x0
#define CFG_DDR_MODE_VAL 0x33
#define CFG_DDR_TRTW_VAL 0x1f
#define CFG_DDR_TWTR_VAL 0x1e
#define CFG_DDR_CONFIG2_VAL 0x9dd0e6a8
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32 0xff
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16 0xffff
#if DDR2_32BIT_SUPPORT
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32
#else
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16
#endif
#define CFG_DDR1_RD_DATA_THIS_CYCLE_VAL 0xffff
#define CFG_SDRAM_RD_DATA_THIS_CYCLE_VAL 0xffffffff
/* DDR2 Init values */
#define CFG_DDR2_EXT_MODE_VAL 0x402
#ifdef ENABLE_DYNAMIC_CONF
#define CFG_DDR_MAGIC 0xaabacada
#define CFG_DDR_MAGIC_F (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x30)
#define CFG_DDR_CONFIG_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 4)
#define CFG_DDR_CONFIG2_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 8)
#define CFG_DDR_EXT_MODE_VAL_F *(volatile int *)(CFG_DDR_MAGIC_F + 12)
#endif
#define CONFIG_NET_MULTI
#define CONFIG_MEMSIZE_IN_BYTES
#define CONFIG_PCI 1
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#ifndef COMPRESSED_UBOOT
#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_PCI | CFG_CMD_FLS |\
CFG_CMD_MII | CFG_CMD_PING | CFG_CMD_NET | CFG_CMD_ENV | CFG_CMD_PLL| \
CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | CFG_CMD_DDR | CFG_CMD_ETHREG))
#else
#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET))
#endif /* #ifndef COMPRESSED_UBOOT */
#define CONFIG_IPADDR 192.168.1.1
#define CONFIG_SERVERIP 192.168.1.10
#define CONFIG_ETHADDR 0x00:0xaa:0xbb:0xcc:0xdd:0xee
#define CFG_FAULT_ECHO_LINK_DOWN 1
#define CFG_WAH132 1
#define CFG_PHY_ADDR 0
#define CFG_GMII 0
#define CFG_MII0_RMII 1
#define CFG_AG7100_GE0_RMII 1
#define CFG_BOOTM_LEN (16 << 20) /* 16 MB */
#define DEBUG
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "hush>"
/*
** Parameters defining the location of the calibration/initialization
** information for the two Merlin devices.
** NOTE: **This will change with different flash configurations**
*/
#define WLANCAL 0x9fff1000
#define BOARDCAL 0x9fff0000
#define ATHEROS_PRODUCT_ID 137
#define CAL_SECTOR (CFG_MAX_FLASH_SECT - 1)
/* For Merlin, both PCI, PCI-E interfaces are valid */
#define AR7240_ART_PCICFG_OFFSET 12
#include <cmd_confdefs.h>
#endif /* __CONFIG_H */