/*
 * Copyright (c) 2013 Qualcomm Atheros, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * This file contains the configuration parameters for the pb93 board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <configs/ar7240.h>

#ifndef FLASH_SIZE
#define FLASH_SIZE		8
#endif
/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CFG_MAX_FLASH_BANKS     1	    /* max number of memory banks */
#if (FLASH_SIZE == 16)
#define CFG_MAX_FLASH_SECT      256    /* max number of sectors on one chip */
#elif (FLASH_SIZE == 8)
#define CFG_MAX_FLASH_SECT      128    /* max number of sectors on one chip */
#else
#define CFG_MAX_FLASH_SECT      64    /* max number of sectors on one chip */
#endif

#define CFG_FLASH_SECTOR_SIZE   (64*1024)
#if (FLASH_SIZE == 16)
#define CFG_FLASH_SIZE          0x01000000 /* Total flash size */
#elif (FLASH_SIZE == 8)
#define CFG_FLASH_SIZE          0x00800000    /* max number of sectors on one chip */
#else
#define CFG_FLASH_SIZE          0x00400000 /* Total flash size */
#endif

#ifndef COMPRESSED_UBOOT
#define ENABLE_DYNAMIC_CONF 1
#endif

#define CONFIG_WASP_SUPPORT 1
#undef CFG_ATHRS26_PHY

#if (CFG_MAX_FLASH_SECT * CFG_FLASH_SECTOR_SIZE) != CFG_FLASH_SIZE
#	error "Invalid flash configuration"
#endif

#define CFG_FLASH_WORD_SIZE     unsigned short

// Set this to zero, for 16bit ddr2
#define DDR2_32BIT_SUPPORT 	1

/* S16 specific defines */

#define CONFIG_AG7240_GE0_IS_CONNECTED 1

#if defined(CONFIG_ATH_NAND_SUPPORT) && defined(COMPRESSED_UBOOT)
#define CFG_FLASH_BASE			0xa0100000
#else
/* NOR Flash start address */
#define CFG_FLASH_BASE			0x9f000000
#endif

#ifdef COMPRESSED_UBOOT
#define BOOTSTRAP_TEXT_BASE         CFG_FLASH_BASE
#define BOOTSTRAP_CFG_MONITOR_BASE  BOOTSTRAP_TEXT_BASE
#endif

/*
 * Defines to change flash size on reboot
 */
#ifdef ENABLE_DYNAMIC_CONF
#define UBOOT_FLASH_SIZE          (256 * 1024)
#define UBOOT_ENV_SEC_START        (CFG_FLASH_BASE + UBOOT_FLASH_SIZE)

#define CFG_FLASH_MAGIC           0xaabacada
#define CFG_FLASH_MAGIC_F         (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x20)
#define CFG_FLASH_SECTOR_SIZE_F   *(volatile int *)(CFG_FLASH_MAGIC_F + 0x4)
#define CFG_FLASH_SIZE_F          *(volatile int *)(CFG_FLASH_MAGIC_F + 0x8) /* Total flash size */
#define CFG_MAX_FLASH_SECT_F      (CFG_FLASH_SIZE / CFG_FLASH_SECTOR_SIZE) /* max number of sectors on one chip */
#else
#define CFG_FLASH_SIZE_F          CFG_FLASH_SIZE
#define CFG_FLASH_SECTOR_SIZE_F   CFG_FLASH_SECTOR_SIZE
#endif


/*
 * The following #defines are needed to get flash environment right
 */
#define	CFG_MONITOR_BASE	TEXT_BASE
#define	CFG_MONITOR_LEN		(192 << 10)

#undef CONFIG_BOOTARGS

#if CONFIG_MI124
#define BC "bc=mi124_f1e\0"
#endif
#if CONFIG_AP123
#define BC "bc=ap123\0"
#endif

#ifndef BC
#define BC
#endif

#define __gen_cmd(n, a, f, ec, cc, el)		\
	#n "=tftp 0x80060000 ${dir}" #f "&&"	\
	#ec " " #a " " #el "&&"			\
	#cc " $fileaddr " #a " $filesize\0"

#define gen_cmd(n, a, f)			\
	__gen_cmd(n, a, f, erase, cp.b, +$filesize)

#define gen_cmd_el(n, a, f, el)			\
	__gen_cmd(n, a, f, erase, cp.b, +el)

#define nand_gen_cmd(n, a, f, s)		\
	__gen_cmd(n, a, f, nand erase, nand write, s)

#ifdef CONFIG_ATH_NAND_SUPPORT
#	ifdef CONFIG_ATH_NAND_BR	// nand boot rom
#		if defined(COMPRESSED_UBOOT)
#			define ATH_U_CMD	nand_gen_cmd(lu, 0x0, 2fw.bin, 0x20000)
#			define MTDPARTS_DEFAULT	"mtdparts=ath-nand:128k(u-boot),384k(free),1280k(uImage),7m(rootfs),128k(dummy),128k(caldata)"
#		else
#			define ATH_U_CMD	nand_gen_cmd(lu, 0x0, 2fw.bin, 0x40000)
#			define MTDPARTS_DEFAULT	"mtdparts=ath-nand:256k(u-boot),256k(u-boot-env),1280k(uImage),7m(rootfs),128k(dummy),128k(caldata)"
#		endif
#		define ATH_ROOT_DEV	"31:03"
#		define CFG_ENV_ADDR	0x00040000
#	else	//dual flash
#		define ATH_U_CMD	gen_cmd(lu, 0x9f000000, u-boot.bin)
#       define MTDPARTS_DEFAULT "mtdparts=ath-nor0:320k(u-boot-and-env);ath-nand:512k(pad),1280k(uImage),7m(rootfs),128k(dummy),128k(caldata)"
#		define ATH_ROOT_DEV	"31:03"
#		define CFG_ENV_ADDR	0x9f040000
#	endif
#	define ATH_F_FILE		db12x${bc}-nand-jffs2${ns}
#	define ATH_F_LEN		0x700000
#	define ATH_F_ADDR		0x1c0000
#	define ATH_K_FILE		vmlinux${bc}.lzma.uImage
#	define ATH_K_ADDR		0x80000
#	define ATH_F_CMD		nand_gen_cmd(lf, ATH_F_ADDR, ATH_F_FILE, ATH_F_LEN)
#	define ATH_K_CMD		nand_gen_cmd(lk, ATH_K_ADDR, ATH_K_FILE, 0x140000)
#	define ATH_EXTRA_ENV		"bootdevice=0\0"
#	define CONFIG_BOOTCOMMAND	"nboot 0x81000000 0 0x80000"
#elif defined(CONFIG_MI124) || defined(CONFIG_AP123)
#	ifdef COMPRESSED_UBOOT
#		define ATH_U_FILE	tuboot.bin
#		define ATH_F_FILE	${bc}-jffs2
#		define ATH_F_LEN	$filesize
#		define ATH_F_ADDR	0x9f010000
#		define ATH_K_FILE	vmlinux_${bc}.lzma.uImage
#		define ATH_K_ADDR	0x9f300000
		/*
		 * For compressed uboot, environment sector is not used.
		 * Hence the mtd partition indices get reduced by 1.
		 * This conflicts with
		 *	- minor no. for /dev/caldata in
		 *		build/scripts/{board}/dev.txt
		 *	- root=<rooot dev> kernel cmdline parameter
		 * Hence, doing a dummy split of the u-boot partition
		 * to maintain the same minor no. as in the normal u-boot.
		 */
#		define MTDPARTS_DEFAULT	"mtdparts=ath-nor0:32k(u-boot1),32k(u-boot2),3008k(rootfs),896k(uImage),64k(mib0),64k(ART)"
#	else /* COMPRESSED_UBOOT */
#		define ATH_U_FILE	u-boot.bin
#		define ATH_F_FILE	${bc}-jffs2
#		define ATH_F_LEN	$filesize
#		define ATH_F_ADDR	0x9f050000
#		define ATH_K_FILE	vmlinux_${bc}.lzma.uImage
#		define ATH_K_ADDR	0x9f300000
#		define MTDPARTS_DEFAULT	"mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(mib0),64k(ART)"
#	endif /* COMPRESSED_UBOOT */
#elif defined(CONFIG_DB12X_P2P)
#	define ATH_U_FILE		u-boot.bin
#	define ATH_F_FILE		db12x-p2p${bc}-jffs2
#	define ATH_F_LEN		0x630000
#	define ATH_F_ADDR		0x9f050000
#	define ATH_K_FILE		vmlinux${bc}.lzma.uImage
#	define ATH_K_ADDR		0x9f680000
#	define MTDPARTS_DEFAULT		"mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
#else
#	define ATH_U_FILE		u-boot.bin
#	define ATH_F_FILE		db12x${bc}-jffs2
#	define ATH_F_LEN		0x630000
#	define ATH_F_ADDR		0x9f050000
#	define ATH_K_FILE		vmlinux${bc}.lzma.uImage
#	define ATH_K_ADDR		0x9f680000
#	define MTDPARTS_DEFAULT		"mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)"
#endif /*CONFIG_MI124*/

#ifndef ATH_ROOT_DEV
#	define ATH_ROOT_DEV	"31:02"
#endif

#ifndef ATH_EXTRA_ENV
#	define ATH_EXTRA_ENV
#endif

#ifndef ATH_U_CMD
#	define ATH_U_CMD	gen_cmd(lu, 0x9f000000, ATH_U_FILE)
#endif

#ifndef ATH_F_CMD
#	define ATH_F_CMD	gen_cmd_el(lf, ATH_F_ADDR, ATH_F_FILE, ATH_F_LEN)
#endif

#ifndef ATH_K_CMD
#	define ATH_K_CMD	gen_cmd(lk, ATH_K_ADDR, ATH_K_FILE)
#endif

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"dir=\0" ATH_U_CMD ATH_F_CMD ATH_K_CMD ""

#define	CONFIG_BOOTARGS		"console=ttyS0,115200 root=" ATH_ROOT_DEV " rootfstype=jffs2 init=/sbin/init " MTDPARTS_DEFAULT

#undef CFG_PLL_FREQ

#ifdef CONFIG_AP123
#define CFG_PLL_FREQ	CFG_PLL_535_400_200
#elif defined(CONFIG_ATH_NAND_SUPPORT)	// NAND on DB120
#define CFG_PLL_FREQ	CFG_PLL_560_400_200
#else					// DB120 and MI124
#define CFG_PLL_FREQ	CFG_PLL_560_450_225
#endif

#undef CFG_HZ
/*
 * MIPS32 24K Processor Core Family Software User's Manual
 *
 * 6.2.9 Count Register (CP0 Register 9, Select 0)
 * The Count register acts as a timer, incrementing at a constant
 * rate, whether or not an instruction is executed, retired, or
 * any forward progress is made through the pipeline.  The counter
 * increments every other clock, if the DC bit in the Cause register
 * is 0.
 */
/* Since the count is incremented every other tick, divide by 2 */
/* XXX derive this from CFG_PLL_FREQ */
#if (CFG_PLL_FREQ == CFG_PLL_200_200_100)
#   define CFG_HZ          (200000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_300_300_150)
#   define CFG_HZ          (300000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_350_350_175)
#   define CFG_HZ          (350000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_333_333_166)
#   define CFG_HZ          (333000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_266_266_133)
#   define CFG_HZ          (266000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_266_266_66)
#   define CFG_HZ          (266000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_400_400_200) || (CFG_PLL_FREQ == CFG_PLL_400_400_100)
#   define CFG_HZ          (400000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_320_320_80) || (CFG_PLL_FREQ == CFG_PLL_320_320_160)
#   define CFG_HZ          (320000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_410_400_200)
#   define CFG_HZ          (410000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_420_400_200)
#   define CFG_HZ          (420000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_240_240_120)
#   define CFG_HZ          (240000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_160_160_80)
#   define CFG_HZ          (160000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_400_200_200) || (CFG_PLL_FREQ == CFG_PLL_400_480_240)
#   define CFG_HZ          (400000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_500_400_200)
#   define CFG_HZ          (500000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_400_200) || (CFG_PLL_FREQ == CFG_PLL_600_450_200) || \
      (CFG_PLL_FREQ == CFG_PLL_600_600_300) || (CFG_PLL_FREQ == CFG_PLL_600_550_275) || \
      (CFG_PLL_FREQ == CFG_PLL_600_332_166) || (CFG_PLL_FREQ == CFG_PLL_600_575_287) || \
      (CFG_PLL_FREQ == CFG_PLL_600_525_262) || (CFG_PLL_FREQ == CFG_PLL_600_332_200) || \
      (CFG_PLL_FREQ == CFG_PLL_600_266_133) || (CFG_PLL_FREQ == CFG_PLL_600_266_200) || \
      (CFG_PLL_FREQ == CFG_PLL_600_650_325) ||  (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_1_2G_400_200)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_500_1G_250)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_550_1_1G_275)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_500_250)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_350_175)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_600_300_150)
#   define CFG_HZ          (600000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_533_400_200) || (CFG_PLL_FREQ == CFG_PLL_533_500_250)
#   define CFG_HZ          (533000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_535_400_200)
#   define CFG_HZ          (535000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_700_400_200)
#   define CFG_HZ          (700000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_650_600_300)
#   define CFG_HZ          (650000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_560_480_240) || (CFG_PLL_FREQ == CFG_PLL_560_400_200) || \
      (CFG_PLL_FREQ == CFG_PLL_560_450_225)
#   define CFG_HZ          (560000000/2)
#elif (CFG_PLL_FREQ == CFG_PLL_566_475_237) || (CFG_PLL_FREQ == CFG_PLL_566_450_225) || \
      (CFG_PLL_FREQ == CFG_PLL_566_550_275) || (CFG_PLL_FREQ == CFG_PLL_566_525_262) || \
      (CFG_PLL_FREQ == CFG_PLL_566_400_200) || (CFG_PLL_FREQ == CFG_PLL_566_500_250)
#   define CFG_HZ          (566000000/2)
#endif

/*
 * timeout values are in ticks
 */
#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */

/*
 * Cache lock for stack
 */
#define CFG_INIT_SP_OFFSET	0x1000
#define CFG_INIT_SRAM_SP_OFFSET	0xbd007000

#ifndef CONFIG_ATH_NAND_SUPPORT
#	define CFG_ENV_ADDR		0x9f040000
#	if (FLASH_SIZE == 16)
#		define CONFIG_BOOTCOMMAND "bootm 0x9f550000"
#	else  /* FLASH_SIZE == 16 */
#		ifdef COMPRESSED_UBOOT
#			if (FLASH_SIZE == 4)
#				define CONFIG_BOOTCOMMAND "bootm 0x9f300000"
#			else  /* FLASH_SIZE == 4 */
#				define CONFIG_BOOTCOMMAND "bootm 0x9f680000"
#			endif  /* FLASH_SIZE == 4 */
#		else /* COMPRESSED_UBOOT */
#			if defined(CONFIG_MI124) || defined(CONFIG_AP123)
#				define CONFIG_BOOTCOMMAND "bootm 0x9f300000"
#			else
#				define CONFIG_BOOTCOMMAND "bootm 0x9f680000"
#			endif
#		endif  /* COMPRESSED_UBOOT */
#	endif  /* FLASH_SIZE == 16 */
#endif


//#define CONFIG_FLASH_16BIT

/* DDR init values */

#define CONFIG_NR_DRAM_BANKS	2

/* DDR settings for WASP */

#define CFG_DDR_REFRESH_VAL     0x4270
#define CFG_DDR_CONFIG_VAL      0xc7bc8cd0
#define CFG_DDR_MODE_VAL_INIT   0x133
#define CFG_DDR_EXT_MODE_VAL    0x0
#define CFG_DDR_MODE_VAL        0x33

#define CFG_DDR_TRTW_VAL        0x1f
#define CFG_DDR_TWTR_VAL        0x1e

#define CFG_DDR_CONFIG2_VAL     0x9dd0e6a8


#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32	0xff
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16	0xffff

#if DDR2_32BIT_SUPPORT
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL		CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_32
#else
#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL		CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16
#endif

#define CFG_DDR1_RD_DATA_THIS_CYCLE_VAL		0xffff
#define CFG_SDRAM_RD_DATA_THIS_CYCLE_VAL	0xffffffff

/* DDR2 Init values */
#define CFG_DDR2_EXT_MODE_VAL    0x402


#ifdef ENABLE_DYNAMIC_CONF
#define CFG_DDR_MAGIC           0xaabacada
#define CFG_DDR_MAGIC_F         (UBOOT_ENV_SEC_START + CFG_FLASH_SECTOR_SIZE - 0x30)
#define CFG_DDR_CONFIG_VAL_F    *(volatile int *)(CFG_DDR_MAGIC_F + 4)
#define CFG_DDR_CONFIG2_VAL_F	*(volatile int *)(CFG_DDR_MAGIC_F + 8)
#define CFG_DDR_EXT_MODE_VAL_F  *(volatile int *)(CFG_DDR_MAGIC_F + 12)
#endif

#define CONFIG_NET_MULTI
#define CONFIG_MEMSIZE_IN_BYTES
#define CONFIG_PCI 1

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#ifndef COMPRESSED_UBOOT
#define ATH_CFG_COMMANDS	((			\
				CONFIG_CMD_DFL	|	\
				CFG_CMD_DHCP	|	\
				CFG_CMD_ELF	|	\
				CFG_CMD_PCI	|	\
				CFG_CMD_FLS	|	\
				CFG_CMD_MII	|	\
				CFG_CMD_PING	|	\
				CFG_CMD_NET	|	\
				CFG_CMD_ENV	|	\
				CFG_CMD_PLL	|	\
				CFG_CMD_FLASH	|	\
				CFG_CMD_RUN	|	\
				CFG_CMD_ELF	|	\
				CFG_CMD_DDR	|	\
				CFG_CMD_ETHREG		\
				) & ~(			\
				CFG_CMD_IMLS	|	\
				CFG_CMD_FLASH		\
				))
#else
#	ifdef CONFIG_ATH_NAND_BR
#		define ATH_CFG_COMMANDS		((			\
						CONFIG_CMD_DFL	|	\
						CFG_CMD_PING	|	\
						CFG_CMD_NET) & ~(	\
						CFG_CMD_FLASH		\
						))
#	else
#		define ATH_CFG_COMMANDS		(CONFIG_CMD_DFL	|	\
						CFG_CMD_PING	|	\
						CFG_CMD_NET)
#	endif
#endif /* #ifndef COMPRESSED_UBOOT */

#ifdef CONFIG_ATH_NAND_SUPPORT
#	ifdef CONFIG_ATH_NAND_BR
#		define CFG_ENV_IS_IN_NAND	1
#		define CFG_ENV_OFFSET		0x40000u
#		define CFG_ENV_SIZE		0x40000u
#		define ATH_EXTRA_CMD		CFG_CMD_NAND
#	else
#		define CFG_ENV_IS_IN_FLASH	1
#		define CFG_ENV_SIZE		CFG_FLASH_SECTOR_SIZE
#		define ATH_EXTRA_CMD		(CFG_CMD_NAND | CFG_CMD_FLASH)
#	endif
#	define NAND_MAX_CHIPS			1
#	define CFG_MAX_NAND_DEVICE		1
#else
#	define ATH_EXTRA_CMD			CFG_CMD_FLASH
#	define CFG_ENV_IS_IN_FLASH		1
#	define CFG_ENV_SIZE			CFG_FLASH_SECTOR_SIZE
#endif

#define DEBUG

#ifdef COMPRESSED_UBOOT
#undef  CFG_ENV_IS_IN_FLASH
#undef  CFG_ENV_IS_IN_NAND
#define CFG_ENV_IS_NOWHERE		1
#endif

#define CONFIG_COMMANDS			(ATH_CFG_COMMANDS | ATH_EXTRA_CMD)

#define CONFIG_IPADDR			192.168.1.1
#define CONFIG_SERVERIP			192.168.1.10
#define CONFIG_ETHADDR			0x00:0xaa:0xbb:0xcc:0xdd:0xee
#define CFG_FAULT_ECHO_LINK_DOWN	1


#define CFG_PHY_ADDR			0
#define CFG_GMII			0
#define CFG_MII0_RMII			1
#define CFG_AG7100_GE0_RMII		1

#define CFG_BOOTM_LEN			(16 << 20) /* 16 MB */
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2		"hush>"

/*
** Parameters defining the location of the calibration/initialization
** information for the two Merlin devices.
** NOTE: **This will change with different flash configurations**
*/

#define WLANCAL                         0x9fff1000
#define BOARDCAL                        0x9fff0000
#define ATHEROS_PRODUCT_ID              137
#define CAL_SECTOR                      (CFG_MAX_FLASH_SECT - 1)

/* For Merlin, both PCI, PCI-E interfaces are valid */
#define AR7240_ART_PCICFG_OFFSET        12

#include <cmd_confdefs.h>

#endif	/* __CONFIG_H */