//==========================================================================
//
//      xyzModem.c
//
//      RedBoot stream handler for xyzModem protocol
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    gthomas
// Contributors: gthomas, tsmith, Yoshinori Sato
// Date:         2000-07-14
// Purpose:      
// Description:  
//              
// This code is part of RedBoot (tm).
//
//####DESCRIPTIONEND####
//
//==========================================================================
#include <common.h>
#include <xyzModem.h>
#include <stdarg.h>
#include <crc.h>

// Assumption - run xyzModem protocol over the console port

// Values magic to the protocol
#define SOH 0x01
#define STX 0x02
#define EOT 0x04
#define ACK 0x06
#define BSP 0x08
#define NAK 0x15
#define CAN 0x18
#define EOF 0x1A  // ^Z for DOS officionados

#define USE_YMODEM_LENGTH

// Data & state local to the protocol
static struct {
#ifdef REDBOOT
    hal_virtual_comm_table_t* __chan;
#else
    int *__chan;
#endif
    unsigned char pkt[1024], *bufp;
    unsigned char blk,cblk,crc1,crc2;
    unsigned char next_blk;  // Expected block
    int len, mode, total_retries;
    int total_SOH, total_STX, total_CAN;
    bool crc_mode, at_eof, tx_ack;
#ifdef USE_YMODEM_LENGTH
    unsigned long file_length, read_length;
#endif
} xyz;

#define xyzModem_CHAR_TIMEOUT            2000  // 2 seconds
#define xyzModem_MAX_RETRIES             20
#define xyzModem_MAX_RETRIES_WITH_CRC    10
#define xyzModem_CAN_COUNT                3    // Wait for 3 CAN before quitting


#ifndef REDBOOT  //SB
typedef int cyg_int32;
int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
#define DELAY 20
	unsigned long counter=0;
	while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) {
		udelay(DELAY);
		counter++;
	}
	if (tstc()) {
		*c=getc();
		return 1;
	}
	return 0;
}

void CYGACC_COMM_IF_PUTC(char x,char y) {
	putc(y);
}

// Validate a hex character
__inline__ static bool
_is_hex(char c)
{
    return (((c >= '0') && (c <= '9')) ||
            ((c >= 'A') && (c <= 'F')) ||
            ((c >= 'a') && (c <= 'f')));
}

// Convert a single hex nibble
__inline__ static int
_from_hex(char c)
{
    int ret = 0;

    if ((c >= '0') && (c <= '9')) {
        ret = (c - '0');
    } else if ((c >= 'a') && (c <= 'f')) {
        ret = (c - 'a' + 0x0a);
    } else if ((c >= 'A') && (c <= 'F')) {
        ret = (c - 'A' + 0x0A);
    }
    return ret;
}

// Convert a character to lower case
__inline__ static char
_tolower(char c)
{
    if ((c >= 'A') && (c <= 'Z')) {
        c = (c - 'A') + 'a';
    }
    return c;
}


//
// Parse (scan) a number
//
bool
parse_num(char *s, unsigned long *val, char **es, char *delim)
{
    bool first = true;
    int radix = 10;
    char c;
    unsigned long result = 0;
    int digit;

    while (*s == ' ') s++;
    while (*s) {
        if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
            radix = 16;
            s += 2;
        }
        first = false;
        c = *s++;
        if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
            // Valid digit
#ifdef CYGPKG_HAL_MIPS
            // FIXME: tx49 compiler generates 0x2539018 for MUL which
            // isn't any good.
            if (16 == radix)
                result = result << 4;
            else
                result = 10 * result;
            result += digit;
#else
            result = (result * radix) + digit;
#endif
        } else {
            if (delim != (char *)0) {
                // See if this character is one of the delimiters
                char *dp = delim;
                while (*dp && (c != *dp)) dp++;
                if (*dp) break;  // Found a good delimiter
            }
            return false;  // Malformatted number
        }
    }
    *val = result;
    if (es != (char **)0) {
        *es = s;
    }
    return true;
}

#endif

#define USE_SPRINTF
#ifdef DEBUG
#ifndef USE_SPRINTF
//
// Note: this debug setup only works if the target platform has two serial ports
// available so that the other one (currently only port 1) can be used for debug
// messages.
//
static int
zm_dprintf(char *fmt, ...)
{
    int cur_console;
    va_list args;

    va_start(args, fmt);
#ifdef REDBOOT
    cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
    CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
#endif
    diag_vprintf(fmt, args);
#ifdef REDBOOT
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
#endif
}

static void
zm_flush(void)
{
}

#else
//
// Note: this debug setup works by storing the strings in a fixed buffer
//
#define FINAL
#ifdef FINAL
static char *zm_out = (char *)0x00380000;
static char *zm_out_start = (char *)0x00380000;
#else
static char zm_buf[8192];
static char *zm_out=zm_buf;
static char *zm_out_start = zm_buf;

#endif
static int
zm_dprintf(char *fmt, ...)
{
    int len;
    va_list args;

    va_start(args, fmt);
    len = diag_vsprintf(zm_out, fmt, args);
    zm_out += len;
    return len;
}

static void
zm_flush(void)
{
    char *p = zm_out_start;
#ifdef REDBOOT
    while (*p) mon_write_char(*p++);
#endif
    zm_out = zm_out_start;
}
#endif

static void
zm_dump_buf(void *buf, int len)
{
#ifdef REDBOOT
    diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
#else

#endif
}

static unsigned char zm_buf[2048];
static unsigned char *zm_bp;

static void
zm_new(void)
{
    zm_bp = zm_buf;
}

static void
zm_save(unsigned char c)
{
    *zm_bp++ = c;
}

static void
zm_dump(int line)
{
    zm_dprintf("Packet at line: %d\n", line);
    zm_dump_buf(zm_buf, zm_bp-zm_buf);
}

#define ZM_DEBUG(x) x
#else
#define ZM_DEBUG(x)
#endif

// Wait for the line to go idle
static void
xyzModem_flush(void)
{
    int res;
    char c;
    while (true) {
        res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
        if (!res) return;
    }
}

static int
xyzModem_get_hdr(void)
{
    char c;
    int res;
    bool hdr_found = false;
    int i, can_total, hdr_chars;
    unsigned short cksum;

    ZM_DEBUG(zm_new());
    // Find the start of a header
    can_total = 0;
    hdr_chars = 0;

    if (xyz.tx_ack) {
        CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
        xyz.tx_ack = false;
    }
    while (!hdr_found) {
        res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
        ZM_DEBUG(zm_save(c));
        if (res) {
            hdr_chars++;
            switch (c) {
            case SOH:
                xyz.total_SOH++;
            case STX:
                if (c == STX) xyz.total_STX++;
                hdr_found = true;
                break;
            case CAN:
                xyz.total_CAN++;
                ZM_DEBUG(zm_dump(__LINE__));
                if (++can_total == xyzModem_CAN_COUNT) {
                    return xyzModem_cancel;
                } else {
                    // Wait for multiple CAN to avoid early quits
                    break;
                }
            case EOT:
                // EOT only supported if no noise
                if (hdr_chars == 1) {
                    CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
                    ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
                    ZM_DEBUG(zm_dump(__LINE__));
                    return xyzModem_eof;
                }
            default:
                // Ignore, waiting for start of header
                ;
            }
        } else {
            // Data stream timed out
            xyzModem_flush();  // Toss any current input
            ZM_DEBUG(zm_dump(__LINE__));
            CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
            return xyzModem_timeout;
        }
    }

    // Header found, now read the data
    res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk);
    ZM_DEBUG(zm_save(xyz.blk));
    if (!res) {
        ZM_DEBUG(zm_dump(__LINE__));
        return xyzModem_timeout;
    }
    res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.cblk);
    ZM_DEBUG(zm_save(xyz.cblk));
    if (!res) {
        ZM_DEBUG(zm_dump(__LINE__));
        return xyzModem_timeout;
    }
    xyz.len = (c == SOH) ? 128 : 1024;
    xyz.bufp = xyz.pkt;
    for (i = 0;  i < xyz.len;  i++) {
        res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
        ZM_DEBUG(zm_save(c));
        if (res) {
            xyz.pkt[i] = c;
        } else {
            ZM_DEBUG(zm_dump(__LINE__));
            return xyzModem_timeout;
        }
    }
    res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc1);
    ZM_DEBUG(zm_save(xyz.crc1));
    if (!res) {
        ZM_DEBUG(zm_dump(__LINE__));
        return xyzModem_timeout;
    }
    if (xyz.crc_mode) {
        res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc2);
        ZM_DEBUG(zm_save(xyz.crc2));
        if (!res) {
            ZM_DEBUG(zm_dump(__LINE__));
            return xyzModem_timeout;
        }
    }
    ZM_DEBUG(zm_dump(__LINE__));
    // Validate the message
    if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
        ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
        ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
        xyzModem_flush();
        return xyzModem_frame;
    }
    // Verify checksum/CRC
    if (xyz.crc_mode) {
        cksum = cyg_crc16(xyz.pkt, xyz.len);
        if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
            ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n", 
                                xyz.crc1, xyz.crc2, cksum & 0xFFFF));
            return xyzModem_cksum;
        }
    } else {
        cksum = 0;
        for (i = 0;  i < xyz.len;  i++) {
            cksum += xyz.pkt[i];
        }
        if (xyz.crc1 != (cksum & 0xFF)) {
            ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF));
            return xyzModem_cksum;
        }
    }
    // If we get here, the message passes [structural] muster
    return 0;
}

int 
xyzModem_stream_open(connection_info_t *info, int *err)
{
    int console_chan, stat=0;
    int retries = xyzModem_MAX_RETRIES;
    int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;

//    ZM_DEBUG(zm_out = zm_out_start);
#ifdef xyzModem_zmodem
    if (info->mode == xyzModem_zmodem) {
        *err = xyzModem_noZmodem;
        return -1;
    }
#endif

#ifdef REDBOOT
    // Set up the I/O channel.  Note: this allows for using a different port in the future
    console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
    if (info->chan >= 0) {
        CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
    } else {
        CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
    }
    xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();

    CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
    CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
#else
// TODO: CHECK !
    int dummy;
    xyz.__chan=&dummy; 
#endif
    xyz.len = 0;
    xyz.crc_mode = true;
    xyz.at_eof = false;
    xyz.tx_ack = false;
    xyz.mode = info->mode;
    xyz.total_retries = 0;
    xyz.total_SOH = 0;
    xyz.total_STX = 0;
    xyz.total_CAN = 0;
#ifdef USE_YMODEM_LENGTH
    xyz.read_length = 0;
    xyz.file_length = 0;
#endif
    
    CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));

    if (xyz.mode == xyzModem_xmodem) {
	    // X-modem doesn't have an information header - exit here
            xyz.next_blk = 1;
            return 0;
    }

    while (retries-- > 0) {
        stat = xyzModem_get_hdr();
        if (stat == 0) {
            // Y-modem file information header
            if (xyz.blk == 0) {
#ifdef USE_YMODEM_LENGTH
                // skip filename
                while (*xyz.bufp++);
                // get the length
                parse_num(xyz.bufp, &xyz.file_length, NULL, " ");
#endif
                // The rest of the file name data block quietly discarded
                xyz.tx_ack = true;
            }
            xyz.next_blk = 1;
            xyz.len = 0;
            return 0;
        } else 
        if (stat == xyzModem_timeout) {
            if (--crc_retries <= 0) xyz.crc_mode = false;
            CYGACC_CALL_IF_DELAY_US(5*100000);   // Extra delay for startup
            CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
            xyz.total_retries++;
            ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
        }
        if (stat == xyzModem_cancel) {
            break;
        }
    }
    *err = stat;
    ZM_DEBUG(zm_flush());
    return -1;
}

int 
xyzModem_stream_read(char *buf, int size, int *err)
{
    int stat, total, len;
    int retries;

    total = 0;
    stat = xyzModem_cancel;
    // Try and get 'size' bytes into the buffer
    while (!xyz.at_eof && (size > 0)) {
        if (xyz.len == 0) {
            retries = xyzModem_MAX_RETRIES;
            while (retries-- > 0) {
                stat = xyzModem_get_hdr();
                if (stat == 0) {
                    if (xyz.blk == xyz.next_blk) {
                        xyz.tx_ack = true;
                        ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__));
                        xyz.next_blk = (xyz.next_blk + 1) & 0xFF;

#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
                        if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) {
#else
                        if (1) {
#endif
                            // Data blocks can be padded with ^Z (EOF) characters
                            // This code tries to detect and remove them
                            if ((xyz.bufp[xyz.len-1] == EOF) &&
                                (xyz.bufp[xyz.len-2] == EOF) &&
                                (xyz.bufp[xyz.len-3] == EOF)) {
                                while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) {
                                    xyz.len--;
                                }
                            }
                        }

#ifdef USE_YMODEM_LENGTH
                        // See if accumulated length exceeds that of the file.
                        // If so, reduce size (i.e., cut out pad bytes)
                        // Only do this for Y-modem (and Z-modem should it ever
                        // be supported since it can fall back to Y-modem mode).
                        if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
                            xyz.read_length += xyz.len;
                            if (xyz.read_length > xyz.file_length) {
                                xyz.len -= (xyz.read_length - xyz.file_length);
                            }
                        }
#endif
                        break;
                    } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
                        // Just re-ACK this so sender will get on with it
                        CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
                        continue;  // Need new header
                    } else {
                        stat = xyzModem_sequence;
                    }
                }
                if (stat == xyzModem_cancel) {
                    break;
                }
                if (stat == xyzModem_eof) {
                    CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
                    ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__));
                    if (xyz.mode == xyzModem_ymodem) {
                        CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
                        xyz.total_retries++;
                        ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
                        stat = xyzModem_get_hdr();                        
                        CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
                        ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
                    }
                    xyz.at_eof = true;
                    break;
                }
                CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
                xyz.total_retries++;
                ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
            }
            if (stat < 0) {
                *err = stat;
                xyz.len = -1;
                return total;
            }
        }
        // Don't "read" data from the EOF protocol package
        if (!xyz.at_eof) {
            len = xyz.len;
            if (size < len) len = size;
            memcpy(buf, xyz.bufp, len);
            size -= len;
            buf += len;
            total += len;
            xyz.len -= len;
            xyz.bufp += len;
        }
    }
    return total;
}

void
xyzModem_stream_close(int *err)
{
    diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", 
                xyz.crc_mode ? "CRC" : "Cksum",
                xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
                xyz.total_retries);
    ZM_DEBUG(zm_flush());
}

// Need to be able to clean out the input buffer, so have to take the
// getc
void xyzModem_stream_terminate(bool abort, int (*getc)(void))
{
  int c;

  if (abort) {
      ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
      switch (xyz.mode) {
	case xyzModem_xmodem:
	case xyzModem_ymodem:
	  // The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal
	  // number of Backspaces is a friendly way to get the other end to abort.
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
	  CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
	  // Now consume the rest of what's waiting on the line.
	  ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
	  xyzModem_flush();
          xyz.at_eof = true;
	break;
#ifdef xyzModem_zmodem
	case xyzModem_zmodem:
	  // Might support it some day I suppose.
#endif
	break;
      }
  } else {
      ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
      // Consume any trailing crap left in the inbuffer from
      // previous recieved blocks. Since very few files are an exact multiple
      // of the transfer block size, there will almost always be some gunk here.
      // If we don't eat it now, RedBoot will think the user typed it.
      ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
      while ((c = (*getc)()) > -1) ;
      ZM_DEBUG(zm_dprintf("\n"));
      // Make a small delay to give terminal programs like minicom
      // time to get control again after their file transfer program
      // exits.
      CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
  }
}

char *
xyzModem_error(int err)
{
    switch (err) {
    case xyzModem_access:
        return "Can't access file";
        break;
    case xyzModem_noZmodem:
        return "Sorry, zModem not available yet";
        break;
    case xyzModem_timeout:
        return "Timed out";
        break;
    case xyzModem_eof:
        return "End of file";
        break;
    case xyzModem_cancel:
        return "Cancelled";
        break;
    case xyzModem_frame:
        return "Invalid framing";
        break;
    case xyzModem_cksum:
        return "CRC/checksum error";
        break;
    case xyzModem_sequence:
        return "Block sequence error";
        break;
    default:
        return "Unknown error";
        break;
    }
}

//
// RedBoot interface
//
#if 0 // SB
GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
              xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
#endif