blob: 31f06e587489008a847648a37e84d2f9302f32f4 [file] [log] [blame]
/*
* (C) Copyright 2001, 2002, 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Keith Outwater, keith_outwater@mvis.com`
* Steven Scholz, steven.scholz@imc-berlin.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
* DS1374 Real Time Clock (RTC).
*
* based on ds1337.c
*/
#include <common.h>
#include <command.h>
#include <rtc.h>
#include <i2c.h>
#if (defined(CONFIG_RTC_DS1374)) && (CONFIG_COMMANDS & CFG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#define DEBUG_RTC
#ifdef DEBUG_RTC
#define DEBUGR(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGR(fmt,args...)
#endif
/*---------------------------------------------------------------------*/
#ifndef CFG_I2C_RTC_ADDR
# define CFG_I2C_RTC_ADDR 0x68
#endif
#if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000)
# error The DS1374 is specified up to 400kHz in fast mode!
#endif
/*
* RTC register addresses
*/
#define RTC_TOD_CNT_BYTE0_ADDR 0x00 /* TimeOfDay */
#define RTC_TOD_CNT_BYTE1_ADDR 0x01
#define RTC_TOD_CNT_BYTE2_ADDR 0x02
#define RTC_TOD_CNT_BYTE3_ADDR 0x03
#define RTC_WD_ALM_CNT_BYTE0_ADDR 0x04
#define RTC_WD_ALM_CNT_BYTE1_ADDR 0x05
#define RTC_WD_ALM_CNT_BYTE2_ADDR 0x06
#define RTC_CTL_ADDR 0x07 /* RTC-CoNTrol-register */
#define RTC_SR_ADDR 0x08 /* RTC-StatusRegister */
#define RTC_TCS_DS_ADDR 0x09 /* RTC-TrickleChargeSelect DiodeSelect-register */
#define RTC_CTL_BIT_AIE (1<<0) /* Bit 0 - Alarm Interrupt enable */
#define RTC_CTL_BIT_RS1 (1<<1) /* Bit 1/2 - Rate Select square wave output */
#define RTC_CTL_BIT_RS2 (1<<2) /* Bit 2/2 - Rate Select square wave output */
#define RTC_CTL_BIT_WDSTR (1<<3) /* Bit 3 - Watchdog Reset Steering */
#define RTC_CTL_BIT_BBSQW (1<<4) /* Bit 4 - Battery-Backed Square-Wave */
#define RTC_CTL_BIT_WD_ALM (1<<5) /* Bit 5 - Watchdoc/Alarm Counter Select */
#define RTC_CTL_BIT_WACE (1<<6) /* Bit 6 - Watchdog/Alarm Counter Enable WACE*/
#define RTC_CTL_BIT_EN_OSC (1<<7) /* Bit 7 - Enable Oscilator */
#define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */
#define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */
typedef unsigned char boolean_t;
#ifndef TRUE
#define TRUE ((boolean_t)(0==0))
#endif
#ifndef FALSE
#define FALSE (!TRUE)
#endif
const char RtcTodAddr[] = {
RTC_TOD_CNT_BYTE0_ADDR,
RTC_TOD_CNT_BYTE1_ADDR,
RTC_TOD_CNT_BYTE2_ADDR,
RTC_TOD_CNT_BYTE3_ADDR
};
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val, boolean_t set);
static void rtc_write_raw (uchar reg, uchar val);
/*
* Get the current time from the RTC
*/
void rtc_get (struct rtc_time *tm){
unsigned long time1, time2;
unsigned int limit;
unsigned char tmp;
unsigned int i;
/*
* Since the reads are being performed one byte at a time,
* there is a chance that a carry will occur during the read.
* To detect this, 2 reads are performed and compared.
*/
limit = 10;
do {
i = 4;
time1 = 0;
while (i--) {
tmp = rtc_read(RtcTodAddr[i]);
time1 = (time1 << 8) | (tmp & 0xff);
}
i = 4;
time2 = 0;
while (i--) {
tmp = rtc_read(RtcTodAddr[i]);
time2 = (time2 << 8) | (tmp & 0xff);
}
} while ((time1 != time2) && limit--);
if (time1 != time2) {
printf("can't get consistent time from rtc chip\n");
}
DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1);
to_tm(time1, tm); /* To Gregorian Date */
if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF)
printf ("### Warning: RTC oscillator has stopped\n");
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
}
/*
* Set the RTC
*/
void rtc_set (struct rtc_time *tmp){
unsigned long time;
unsigned i;
DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
printf("WARNING: year should be between 1970 and 2069!\n");
time = mktime(tmp->tm_year, tmp->tm_mon,
tmp->tm_mday, tmp->tm_hour,
tmp->tm_min, tmp->tm_sec);
DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time);
/* write to RTC_TOD_CNT_BYTEn_ADDR */
for (i = 0; i <= 3; i++) {
rtc_write_raw(RtcTodAddr[i], (unsigned char)(time & 0xff));
time = time >> 8;
}
/* Start clock */
rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE);
}
/*
* Reset the RTC. We setting the date back to 1970-01-01.
* We also enable the oscillator output on the SQW/OUT pin and program
* it for 32,768 Hz output. Note that according to the datasheet, turning
* on the square wave output increases the current drain on the backup
* battery to something between 480nA and 800nA.
*/
void rtc_reset (void){
struct rtc_time tmp;
/* clear status flags */
rtc_write (RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), FALSE); /* clearing OSF and AF */
/* Initialise DS1374 oriented to MPC8349E-ADS */
rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC
|RTC_CTL_BIT_WACE
|RTC_CTL_BIT_AIE), FALSE);/* start osc, disable WACE, clear AIE
- set to 0 */
rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM
|RTC_CTL_BIT_WDSTR
|RTC_CTL_BIT_RS1
|RTC_CTL_BIT_RS2
|RTC_CTL_BIT_BBSQW), TRUE);/* disable WD/ALM, WDSTR set to INT-pin,
set BBSQW and SQW to 32k
- set to 1 */
tmp.tm_year = 1970;
tmp.tm_mon = 1;
tmp.tm_mday= 1;
tmp.tm_hour = 0;
tmp.tm_min = 0;
tmp.tm_sec = 0;
rtc_set(&tmp);
printf("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAC, TRUE);
rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR,0xDE, TRUE);
rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAD, TRUE);
}
/*
* Helper functions
*/
static uchar rtc_read (uchar reg)
{
return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val, boolean_t set)
{
if (set == TRUE) {
val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg);
i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
} else {
val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val;
i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
}
}
static void rtc_write_raw (uchar reg, uchar val)
{
i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
}
#endif /* (CONFIG_RTC_DS1374) && (CFG_COMMANDS & CFG_CMD_DATE) */