blob: 0b1541d5c346c86d4c3f64d710cc74344760299e [file] [log] [blame]
/*
* Copyright (C) 2004 by FS Forth-Systeme GmbH.
* All rights reserved.
* Markus Pietrek <mpietrek@fsforth.de>
*
* Configuation settings for the NetSilicon NS9750 DevBoard
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */
#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */
#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2)
#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4)
#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8)
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*@TODO #define CONFIG_STATUS_LED*/
#define CONFIG_USE_IRQ
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial
* data */
/*
* Hardware drivers
*/
#define CFG_NS9750_UART 1 /* use on-chip UART */
#define CONFIG_DRIVER_NS9750_ETHERNET 1 /* use on-chip ethernet */
/*
* select serial console configuration
*/
#define CONFIG_CONS_INDEX 1 /* Port B */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 38400
/***********************************************************
* Command definition
***********************************************************/
#if 0 /* @TODO */
#define CONFIG_COMMANDS \
(CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
/*CFG_CMD_NAND |*/ \
/*CFG_CMD_EEPROM |*/ \
/*CFG_CMD_I2C |*/ \
/*CFG_CMD_USB |*/ \
CFG_CMD_REGINFO | \
CFG_CMD_DATE | \
CFG_CMD_ELF)
#else
#define CONFIG_COMMANDS \
(CONFIG_CMD_BDI | \
CFG_CMD_NET | \
CFG_CMD_PING | \
CFG_CMD_CONSOLE | \
CFG_CMD_LOADB | \
CFG_CMD_LOADS | \
CFG_CMD_MEMORY)
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.42.30
#define CONFIG_SERVERIP 192.168.42.1
/*#define CONFIG_BOOTFILE "elinos-lart" */
/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "NS9750DEV # " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
#define CFG_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */
#define CFG_HZ (CPU_CLK_FREQ/64)
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define NS9750_ETH_PHY_ADDRESS (0x0000)
/*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
/* TODO */
#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
#define CFG_FLASH_BASE PHYS_FLASH_1
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
/* @TODO*/
#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
#if 0
#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
#endif
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#ifdef CONFIG_AMD_LV800
#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
#endif
#ifdef CONFIG_AMD_LV400
#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
#endif
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
/* @TODO */
/*#define CFG_ENV_IS_IN_FLASH 1*/
#define CFG_ENV_IS_NOWHERE
#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
#ifdef CONFIG_STATUS_LED
extern void __led_init(led_id_t mask, int state);
extern void __led_toggle(led_id_t mask);
extern void __led_set(led_id_t mask, int state);
#endif /* CONFIG_STATUS_LED */
#endif /* __CONFIG_H */