blob: 47154b0783f9dc173d9c0ec8183d916c3246e5c6 [file] [log] [blame]
A version of malloc/free/realloc written by Doug Lea and released to the
public domain. Send questions/comments/complaints/performance data
* VERSION 2.6.6 Sun Mar 5 19:10:03 2000 Doug Lea (dl at gee)
Note: There may be an updated version of this malloc obtainable at
Check before installing!
* Why use this malloc?
This is not the fastest, most space-conserving, most portable, or
most tunable malloc ever written. However it is among the fastest
while also being among the most space-conserving, portable and tunable.
Consistent balance across these factors results in a good general-purpose
allocator. For a high-level description, see
* Synopsis of public routines
(Much fuller descriptions are contained in the program documentation below.)
malloc(size_t n);
Return a pointer to a newly allocated chunk of at least n bytes, or null
if no space is available.
free(Void_t* p);
Release the chunk of memory pointed to by p, or no effect if p is null.
realloc(Void_t* p, size_t n);
Return a pointer to a chunk of size n that contains the same data
as does chunk p up to the minimum of (n, p's size) bytes, or null
if no space is available. The returned pointer may or may not be
the same as p. If p is null, equivalent to malloc. Unless the
#define REALLOC_ZERO_BYTES_FREES below is set, realloc with a
size argument of zero (re)allocates a minimum-sized chunk.
memalign(size_t alignment, size_t n);
Return a pointer to a newly allocated chunk of n bytes, aligned
in accord with the alignment argument, which must be a power of
valloc(size_t n);
Equivalent to memalign(pagesize, n), where pagesize is the page
size of the system (or as near to this as can be figured out from
all the includes/defines below.)
pvalloc(size_t n);
Equivalent to valloc(minimum-page-that-holds(n)), that is,
round up n to nearest pagesize.
calloc(size_t unit, size_t quantity);
Returns a pointer to quantity * unit bytes, with all locations
set to zero.
cfree(Void_t* p);
Equivalent to free(p).
malloc_trim(size_t pad);
Release all but pad bytes of freed top-most memory back
to the system. Return 1 if successful, else 0.
malloc_usable_size(Void_t* p);
Report the number usable allocated bytes associated with allocated
chunk p. This may or may not report more bytes than were requested,
due to alignment and minimum size constraints.
Prints brief summary statistics on stderr.
Returns (by copy) a struct containing various summary statistics.
mallopt(int parameter_number, int parameter_value)
Changes one of the tunable parameters described below. Returns
1 if successful in changing the parameter, else 0.
* Vital statistics:
Alignment: 8-byte
8 byte alignment is currently hardwired into the design. This
seems to suffice for all current machines and C compilers.
Assumed pointer representation: 4 or 8 bytes
Code for 8-byte pointers is untested by me but has worked
reliably by Wolfram Gloger, who contributed most of the
changes supporting this.
Assumed size_t representation: 4 or 8 bytes
Note that size_t is allowed to be 4 bytes even if pointers are 8.
Minimum overhead per allocated chunk: 4 or 8 bytes
Each malloced chunk has a hidden overhead of 4 bytes holding size
and status information.
Minimum allocated size: 4-byte ptrs: 16 bytes (including 4 overhead)
8-byte ptrs: 24/32 bytes (including, 4/8 overhead)
When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte
ptrs but 4 byte size) or 24 (for 8/8) additional bytes are
needed; 4 (8) for a trailing size field
and 8 (16) bytes for free list pointers. Thus, the minimum
allocatable size is 16/24/32 bytes.
Even a request for zero bytes (i.e., malloc(0)) returns a
pointer to something of the minimum allocatable size.
Maximum allocated size: 4-byte size_t: 2^31 - 8 bytes
8-byte size_t: 2^63 - 16 bytes
It is assumed that (possibly signed) size_t bit values suffice to
represent chunk sizes. `Possibly signed' is due to the fact
that `size_t' may be defined on a system as either a signed or
an unsigned type. To be conservative, values that would appear
as negative numbers are avoided.
Requests for sizes with a negative sign bit when the request
size is treaded as a long will return null.
Maximum overhead wastage per allocated chunk: normally 15 bytes
Alignnment demands, plus the minimum allocatable size restriction
make the normal worst-case wastage 15 bytes (i.e., up to 15
more bytes will be allocated than were requested in malloc), with
two exceptions:
1. Because requests for zero bytes allocate non-zero space,
the worst case wastage for a request of zero bytes is 24 bytes.
2. For requests >= mmap_threshold that are serviced via
mmap(), the worst case wastage is 8 bytes plus the remainder
from a system page (the minimal mmap unit); typically 4096 bytes.
* Limitations
Here are some features that are NOT currently supported
* No user-definable hooks for callbacks and the like.
* No automated mechanism for fully checking that all accesses
to malloced memory stay within their bounds.
* No support for compaction.
* Synopsis of compile-time options:
People have reported using previous versions of this malloc on all
versions of Unix, sometimes by tweaking some of the defines
below. It has been tested most extensively on Solaris and
Linux. It is also reported to work on WIN32 platforms.
People have also reported adapting this malloc for use in
stand-alone embedded systems.
The implementation is in straight, hand-tuned ANSI C. Among other
consequences, it uses a lot of macros. Because of this, to be at
all usable, this code should be compiled using an optimizing compiler
(for example gcc -O2) that can simplify expressions and control
__STD_C (default: derived from C compiler defines)
Nonzero if using ANSI-standard C compiler, a C++ compiler, or
a C compiler sufficiently close to ANSI to get away with it.
DEBUG (default: NOT defined)
Define to enable debugging. Adds fairly extensive assertion-based
checking to help track down memory errors, but noticeably slows down
Define this if you think that realloc(p, 0) should be equivalent
to free(p). Otherwise, since malloc returns a unique pointer for
malloc(0), so does realloc(p, 0).
HAVE_MEMCPY (default: defined)
Define if you are not otherwise using ANSI STD C, but still
have memcpy and memset in your C library and want to use them.
Otherwise, simple internal versions are supplied.
USE_MEMCPY (default: 1 if HAVE_MEMCPY is defined, 0 otherwise)
Define as 1 if you want the C library versions of memset and
memcpy called in realloc and calloc (otherwise macro versions are used).
At least on some platforms, the simple macro versions usually
outperform libc versions.
HAVE_MMAP (default: defined as 1)
Define to non-zero to optionally make malloc() use mmap() to
allocate very large blocks.
HAVE_MREMAP (default: defined as 0 unless Linux libc set)
Define to non-zero to optionally make realloc() use mremap() to
reallocate very large blocks.
malloc_getpagesize (default: derived from system #includes)
Either a constant or routine call returning the system page size.
HAVE_USR_INCLUDE_MALLOC_H (default: NOT defined)
Optionally define if you are on a system with a /usr/include/malloc.h
that declares struct mallinfo. It is not at all necessary to
define this even if you do, but will ensure consistency.
INTERNAL_SIZE_T (default: size_t)
Define to a 32-bit type (probably `unsigned int') if you are on a
64-bit machine, yet do not want or need to allow malloc requests of
greater than 2^31 to be handled. This saves space, especially for
very small chunks.
INTERNAL_LINUX_C_LIB (default: NOT defined)
Defined only when compiled as part of Linux libc.
Also note that there is some odd internal name-mangling via defines
(for example, internally, `malloc' is named `mALLOc') needed
when compiling in this case. These look funny but don't otherwise
affect anything.
WIN32 (default: undefined)
Define this on MS win (95, nt) platforms to compile in sbrk emulation.
LACKS_UNISTD_H (default: undefined if not WIN32)
Define this if your system does not have a <unistd.h>.
LACKS_SYS_PARAM_H (default: undefined if not WIN32)
Define this if your system does not have a <sys/param.h>.
MORECORE (default: sbrk)
The name of the routine to call to obtain more memory from the system.
MORECORE_FAILURE (default: -1)
The value returned upon failure of MORECORE.
True (1) if the routine mapped to MORECORE zeroes out memory (which
holds for sbrk).
Default values of tunable parameters (described in detail below)
controlling interaction with host system routines (sbrk, mmap, etc).
These values may also be changed dynamically via mallopt(). The
preset defaults are those that give best performance for typical
USE_DL_PREFIX (default: undefined)
Prefix all public routines with the string 'dl'. Useful to
quickly avoid procedure declaration conflicts and linker symbol
conflicts with existing memory allocation routines.
/* Preliminaries */
#ifndef __STD_C
#ifdef __STDC__
#define __STD_C 1
#if __cplusplus
#define __STD_C 1
#define __STD_C 0
#endif /*__cplusplus*/
#endif /*__STDC__*/
#endif /*__STD_C*/
#ifndef Void_t
#if (__STD_C || defined(WIN32))
#define Void_t void
#define Void_t char
#endif /*Void_t*/
#if __STD_C
#include <linux/stddef.h> /* for size_t */
#include <sys/types.h>
#endif /* __STD_C */
#ifdef __cplusplus
extern "C" {
#if 0 /* not for U-Boot */
#include <stdio.h> /* needed for malloc_stats */
Compile-time options
Because freed chunks may be overwritten with link fields, this
malloc will often die when freed memory is overwritten by user
programs. This can be very effective (albeit in an annoying way)
in helping track down dangling pointers.
If you compile with -DDEBUG, a number of assertion checks are
enabled that will catch more memory errors. You probably won't be
able to make much sense of the actual assertion errors, but they
should help you locate incorrectly overwritten memory. The
checking is fairly extensive, and will slow down execution
noticeably. Calling malloc_stats or mallinfo with DEBUG set will
attempt to check every non-mmapped allocated and free chunk in the
course of computing the summmaries. (By nature, mmapped regions
cannot be checked very much automatically.)
Setting DEBUG may also be helpful if you are trying to modify
this code. The assertions in the check routines spell out in more
detail the assumptions and invariants underlying the algorithms.
#ifdef DEBUG
/* #include <assert.h> */
#define assert(x) ((void)0)
#define assert(x) ((void)0)
INTERNAL_SIZE_T is the word-size used for internal bookkeeping
of chunk sizes. On a 64-bit machine, you can reduce malloc
overhead by defining INTERNAL_SIZE_T to be a 32 bit `unsigned int'
at the expense of not being able to handle requests greater than
2^31. This limitation is hardly ever a concern; you are encouraged
to set this. However, the default version is the same as size_t.
#define INTERNAL_SIZE_T size_t
REALLOC_ZERO_BYTES_FREES should be set if a call to
realloc with zero bytes should be the same as a call to free.
Some people think it should. Otherwise, since this malloc
returns a unique pointer for malloc(0), so does realloc(p, 0).
WIN32 causes an emulation of sbrk to be compiled in
mmap-based options are not currently supported in WIN32.
/* #define WIN32 */
#ifdef WIN32
#define MORECORE wsbrk
#define HAVE_MMAP 0
Include 'windows.h' to get the necessary declarations for the
Microsoft Visual C++ data structures and routines used in the 'sbrk'
Define WIN32_LEAN_AND_MEAN so that only the essential Microsoft
Visual C++ header files are included.
#include <windows.h>
HAVE_MEMCPY should be defined if you are not otherwise using
ANSI STD C, but still have memcpy and memset in your C library
and want to use them in calloc and realloc. Otherwise simple
macro versions are defined here.
USE_MEMCPY should be defined as 1 if you actually want to
have memset and memcpy called. People report that the macro
versions are often enough faster than libc versions on many
systems that it is better to use them.
#ifndef USE_MEMCPY
#define USE_MEMCPY 1
#define USE_MEMCPY 0
#if (__STD_C || defined(HAVE_MEMCPY))
#if __STD_C
void* memset(void*, int, size_t);
void* memcpy(void*, const void*, size_t);
#ifdef WIN32
/* On Win32 platforms, 'memset()' and 'memcpy()' are already declared in */
/* 'windows.h' */
Void_t* memset();
Void_t* memcpy();
/* The following macros are only invoked with (2n+1)-multiples of
INTERNAL_SIZE_T units, with a positive integer n. This is exploited
for fast inline execution when n is small. */
#define MALLOC_ZERO(charp, nbytes) \
do { \
INTERNAL_SIZE_T mzsz = (nbytes); \
if(mzsz <= 9*sizeof(mzsz)) { \
if(mzsz >= 5*sizeof(mzsz)) { *mz++ = 0; \
*mz++ = 0; \
if(mzsz >= 7*sizeof(mzsz)) { *mz++ = 0; \
*mz++ = 0; \
if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0; \
*mz++ = 0; }}} \
*mz++ = 0; \
*mz++ = 0; \
*mz = 0; \
} else memset((charp), 0, mzsz); \
} while(0)
#define MALLOC_COPY(dest,src,nbytes) \
do { \
INTERNAL_SIZE_T mcsz = (nbytes); \
if(mcsz <= 9*sizeof(mcsz)) { \
INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src); \
INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest); \
if(mcsz >= 5*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
*mcdst++ = *mcsrc++; \
if(mcsz >= 7*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
*mcdst++ = *mcsrc++; \
if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \
*mcdst++ = *mcsrc++; }}} \
*mcdst++ = *mcsrc++; \
*mcdst++ = *mcsrc++; \
*mcdst = *mcsrc ; \
} else memcpy(dest, src, mcsz); \
} while(0)
#else /* !USE_MEMCPY */
/* Use Duff's device for good zeroing/copying performance. */
#define MALLOC_ZERO(charp, nbytes) \
do { \
long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn; \
if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; } \
switch (mctmp) { \
case 0: for(;;) { *mzp++ = 0; \
case 7: *mzp++ = 0; \
case 6: *mzp++ = 0; \
case 5: *mzp++ = 0; \
case 4: *mzp++ = 0; \
case 3: *mzp++ = 0; \
case 2: *mzp++ = 0; \
case 1: *mzp++ = 0; if(mcn <= 0) break; mcn--; } \
} \
} while(0)
#define MALLOC_COPY(dest,src,nbytes) \
do { \
long mctmp = (nbytes)/sizeof(INTERNAL_SIZE_T), mcn; \
if (mctmp < 8) mcn = 0; else { mcn = (mctmp-1)/8; mctmp %= 8; } \
switch (mctmp) { \
case 0: for(;;) { *mcdst++ = *mcsrc++; \
case 7: *mcdst++ = *mcsrc++; \
case 6: *mcdst++ = *mcsrc++; \
case 5: *mcdst++ = *mcsrc++; \
case 4: *mcdst++ = *mcsrc++; \
case 3: *mcdst++ = *mcsrc++; \
case 2: *mcdst++ = *mcsrc++; \
case 1: *mcdst++ = *mcsrc++; if(mcn <= 0) break; mcn--; } \
} \
} while(0)
Define HAVE_MMAP to optionally make malloc() use mmap() to
allocate very large blocks. These will be returned to the
operating system immediately after a free().
#ifndef HAVE_MMAP
#define HAVE_MMAP 1
#undef HAVE_MMAP /* Not available for U-Boot */
Define HAVE_MREMAP to make realloc() use mremap() to re-allocate
large blocks. This is currently only possible on Linux with
kernel versions newer than 1.3.77.
#define HAVE_MREMAP 1
#define HAVE_MREMAP 0
#undef HAVE_MREMAP /* Not available for U-Boot */
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
#if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
#endif /* HAVE_MMAP */
Access to system page size. To the extent possible, this malloc
manages memory from the system in page-size units.
The following mechanics for getpagesize were adapted from
bsd/gnu getpagesize.h
#define LACKS_UNISTD_H /* Shortcut for U-Boot */
#define malloc_getpagesize 4096
# include <unistd.h>
#ifndef malloc_getpagesize
# ifdef _SC_PAGESIZE /* some SVR4 systems omit an underscore */
# ifndef _SC_PAGE_SIZE
# endif
# endif
# ifdef _SC_PAGE_SIZE
# define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
# else
# if defined(BSD) || defined(DGUX) || defined(HAVE_GETPAGESIZE)
extern size_t getpagesize();
# define malloc_getpagesize getpagesize()
# else
# ifdef WIN32
# define malloc_getpagesize (4096) /* TBD: Use 'GetSystemInfo' instead */
# else
# include <sys/param.h>
# endif
# define malloc_getpagesize EXEC_PAGESIZE
# else
# ifdef NBPG
# ifndef CLSIZE
# define malloc_getpagesize NBPG
# else
# define malloc_getpagesize (NBPG * CLSIZE)
# endif
# else
# ifdef NBPC
# define malloc_getpagesize NBPC
# else
# ifdef PAGESIZE
# define malloc_getpagesize PAGESIZE
# else
# define malloc_getpagesize (4096) /* just guess */
# endif
# endif
# endif
# endif
# endif
# endif
# endif
This version of malloc supports the standard SVID/XPG mallinfo
routine that returns a struct containing the same kind of
information you can get from malloc_stats. It should work on
any SVID/XPG compliant system that has a /usr/include/malloc.h
defining struct mallinfo. (If you'd like to install such a thing
yourself, cut out the preliminary declarations as described above
and below and save them in a malloc.h file. But there's no
compelling reason to bother to do this.)
The main declaration needed is the mallinfo struct that is returned
(by-copy) by mallinfo(). The SVID/XPG malloinfo struct contains a
bunch of fields, most of which are not even meaningful in this
version of malloc. Some of these fields are are instead filled by
mallinfo() with other numbers that might possibly be of interest.
HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
/usr/include/malloc.h file that includes a declaration of struct
mallinfo. If so, it is included; else an SVID2/XPG2 compliant
version is declared below. These must be precisely the same for
mallinfo() to work.
#include "/usr/include/malloc.h"
/* SVID2/XPG mallinfo structure */
struct mallinfo {
int arena; /* total space allocated from system */
int ordblks; /* number of non-inuse chunks */
int smblks; /* unused -- always zero */
int hblks; /* number of mmapped regions */
int hblkhd; /* total space in mmapped regions */
int usmblks; /* unused -- always zero */
int fsmblks; /* unused -- always zero */
int uordblks; /* total allocated space */
int fordblks; /* total non-inuse space */
int keepcost; /* top-most, releasable (via malloc_trim) space */
/* SVID2/XPG mallopt options */
#define M_MXFAST 1 /* UNUSED in this malloc */
#define M_NLBLKS 2 /* UNUSED in this malloc */
#define M_GRAIN 3 /* UNUSED in this malloc */
#define M_KEEP 4 /* UNUSED in this malloc */
/* mallopt options that actually do something */
#define M_TOP_PAD -2
#define M_MMAP_MAX -4
#define DEFAULT_TRIM_THRESHOLD (128 * 1024)
M_TRIM_THRESHOLD is the maximum amount of unused top-most memory
to keep before releasing via malloc_trim in free().
Automatic trimming is mainly useful in long-lived programs.
Because trimming via sbrk can be slow on some systems, and can
sometimes be wasteful (in cases where programs immediately
afterward allocate more large chunks) the value should be high
enough so that your overall system performance would improve by
The trim threshold and the mmap control parameters (see below)
can be traded off with one another. Trimming and mmapping are
two different ways of releasing unused memory back to the
system. Between these two, it is often possible to keep
system-level demands of a long-lived program down to a bare
minimum. For example, in one test suite of sessions measuring
the XF86 X server on Linux, using a trim threshold of 128K and a
mmap threshold of 192K led to near-minimal long term resource
If you are using this malloc in a long-lived program, it should
pay to experiment with these values. As a rough guide, you
might set to a value close to the average size of a process
(program) running on your system. Releasing this much memory
would allow such a process to run in memory. Generally, it's
worth it to tune for trimming rather tham memory mapping when a
program undergoes phases where several large chunks are
allocated and released in ways that can reuse each other's
storage, perhaps mixed with phases where there are no such
chunks at all. And in well-behaved long-lived programs,
controlling release of large blocks via trimming versus mapping
is usually faster.
However, in most programs, these parameters serve mainly as
protection against the system-level effects of carrying around
massive amounts of unneeded memory. Since frequent calls to
sbrk, mmap, and munmap otherwise degrade performance, the default
parameters are set to relatively high values that serve only as
The default trim value is high enough to cause trimming only in
fairly extreme (by current memory consumption standards) cases.
It must be greater than page size to have any useful effect. To
disable trimming completely, you can set to (unsigned long)(-1);
#define DEFAULT_TOP_PAD (0)
M_TOP_PAD is the amount of extra `padding' space to allocate or
retain whenever sbrk is called. It is used in two ways internally:
* When sbrk is called to extend the top of the arena to satisfy
a new malloc request, this much padding is added to the sbrk
* When malloc_trim is called automatically from free(),
it is used as the `pad' argument.
In both cases, the actual amount of padding is rounded
so that the end of the arena is always a system page boundary.
The main reason for using padding is to avoid calling sbrk so
often. Having even a small pad greatly reduces the likelihood
that nearly every malloc request during program start-up (or
after trimming) will invoke sbrk, which needlessly wastes
Automatic rounding-up to page-size units is normally sufficient
to avoid measurable overhead, so the default is 0. However, in
systems where sbrk is relatively slow, it can pay to increase
this value, at the expense of carrying around more memory than
the program needs.
#define DEFAULT_MMAP_THRESHOLD (128 * 1024)
M_MMAP_THRESHOLD is the request size threshold for using mmap()
to service a request. Requests of at least this size that cannot
be allocated using already-existing space will be serviced via mmap.
(If enough normal freed space already exists it is used instead.)
Using mmap segregates relatively large chunks of memory so that
they can be individually obtained and released from the host
system. A request serviced through mmap is never reused by any
other request (at least not directly; the system may just so
happen to remap successive requests to the same locations).
Segregating space in this way has the benefit that mmapped space
can ALWAYS be individually released back to the system, which
helps keep the system level memory demands of a long-lived
program low. Mapped memory can never become `locked' between
other chunks, as can happen with normally allocated chunks, which
menas that even trimming via malloc_trim would not release them.
However, it has the disadvantages that:
1. The space cannot be reclaimed, consolidated, and then
used to service later requests, as happens with normal chunks.
2. It can lead to more wastage because of mmap page alignment
3. It causes malloc performance to be more dependent on host
system memory management support routines which may vary in
implementation quality and may impose arbitrary
limitations. Generally, servicing a request via normal
malloc steps is faster than going through a system's mmap.
All together, these considerations should lead you to use mmap
only for relatively large requests.
#define DEFAULT_MMAP_MAX (64)
#define DEFAULT_MMAP_MAX (0)
M_MMAP_MAX is the maximum number of requests to simultaneously
service using mmap. This parameter exists because:
1. Some systems have a limited number of internal tables for
use by mmap.
2. In most systems, overreliance on mmap can degrade overall
3. If a program allocates many large regions, it is probably
better off using normal sbrk-based allocation routines that
can reclaim and reallocate normal heap memory. Using a
small value allows transition into this mode after the
first few allocations.
Setting to 0 disables all use of mmap. If HAVE_MMAP is not set,
the default value is 0, and attempts to set it to non-zero values
in mallopt will fail.
USE_DL_PREFIX will prefix all public routines with the string 'dl'.
Useful to quickly avoid procedure declaration conflicts and linker
symbol conflicts with existing memory allocation routines.
/* #define USE_DL_PREFIX */
Special defines for linux libc
Except when compiled using these special defines for Linux libc
using weak aliases, this malloc is NOT designed to work in
multithreaded applications. No semaphores or other concurrency
control are provided to ensure that multiple malloc or free calls
don't run at the same time, which could be disasterous. A single
semaphore could be used across malloc, realloc, and free (which is
essentially the effect of the linux weak alias approach). It would
be hard to obtain finer granularity.
#if __STD_C
Void_t * __default_morecore_init (ptrdiff_t);
Void_t *(*__morecore)(ptrdiff_t) = __default_morecore_init;
Void_t * __default_morecore_init ();
Void_t *(*__morecore)() = __default_morecore_init;
#define MORECORE (*__morecore)
#if __STD_C
extern Void_t* sbrk(ptrdiff_t);
extern Void_t* sbrk();
#ifndef MORECORE
#define MORECORE sbrk
#if defined(INTERNAL_LINUX_C_LIB) && defined(__ELF__)
#define cALLOc __libc_calloc
#define fREe __libc_free
#define mALLOc __libc_malloc
#define mEMALIGn __libc_memalign
#define rEALLOc __libc_realloc
#define vALLOc __libc_valloc
#define pvALLOc __libc_pvalloc
#define mALLINFo __libc_mallinfo
#define mALLOPt __libc_mallopt
#pragma weak calloc = __libc_calloc
#pragma weak free = __libc_free
#pragma weak cfree = __libc_free
#pragma weak malloc = __libc_malloc
#pragma weak memalign = __libc_memalign
#pragma weak realloc = __libc_realloc
#pragma weak valloc = __libc_valloc
#pragma weak pvalloc = __libc_pvalloc
#pragma weak mallinfo = __libc_mallinfo
#pragma weak mallopt = __libc_mallopt
#define cALLOc dlcalloc
#define fREe dlfree
#define mALLOc dlmalloc
#define mEMALIGn dlmemalign
#define rEALLOc dlrealloc
#define vALLOc dlvalloc
#define pvALLOc dlpvalloc
#define mALLINFo dlmallinfo
#define mALLOPt dlmallopt
#else /* USE_DL_PREFIX */
#define cALLOc calloc
#define fREe free
#define mALLOc malloc
#define mEMALIGn memalign
#define rEALLOc realloc
#define vALLOc valloc
#define pvALLOc pvalloc
#define mALLINFo mallinfo
#define mALLOPt mallopt
#endif /* USE_DL_PREFIX */
/* Public routines */
#if __STD_C
Void_t* mALLOc(size_t);
void fREe(Void_t*);
Void_t* rEALLOc(Void_t*, size_t);
Void_t* mEMALIGn(size_t, size_t);
Void_t* vALLOc(size_t);
Void_t* pvALLOc(size_t);
Void_t* cALLOc(size_t, size_t);
void cfree(Void_t*);
int malloc_trim(size_t);
size_t malloc_usable_size(Void_t*);
void malloc_stats(void);
int mALLOPt(int, int);
struct mallinfo mALLINFo(void);
Void_t* mALLOc();
void fREe();
Void_t* rEALLOc();
Void_t* mEMALIGn();
Void_t* vALLOc();
Void_t* pvALLOc();
Void_t* cALLOc();
void cfree();
int malloc_trim();
size_t malloc_usable_size();
void malloc_stats();
int mALLOPt();
struct mallinfo mALLINFo();
#ifdef __cplusplus
}; /* end of extern "C" */